binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 ELFEDIT_PROG=elfedit
  43
  44 # These should all be the same program too.
  45 SIZE_PROG=size
  46 NM_PROG=nm-new
  47 OBJDUMP_PROG=objdump
  48
  49 # This is the demangler, as a standalone program.
  50 # Note: This one is used as the installed name too, unlike the above.
  51 DEMANGLER_PROG=cxxfilt
  52
  53 ADDR2LINE_PROG=addr2line
  54
  55 NLMCONV_PROG=nlmconv
  56 DLLTOOL_PROG=dlltool
  57 WINDRES_PROG=windres
  58 WINDMC_PROG=windmc
  59 DLLWRAP_PROG=dllwrap
  60
  61 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  62
  63 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  64
  65 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  66 EXTRA_SCRIPTS = embedspu
  67
  68 ## Test programs.
  69 BFDTEST1_PROG = bfdtest1
  70
  71 TEST_PROGS = $(BFDTEST1_PROG)
  72
  73 ## We need a special rule to install the programs which are built with
  74 ## -new, and to rename cxxfilt to c++filt.
  75 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  76 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
  77
  78 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  79
  80 # Stuff that goes in tooldir/ if appropriate.
  81 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  82
  83 BASEDIR = $(srcdir)/..
  84 BFDDIR = $(BASEDIR)/bfd
  85 INCDIR  = $(BASEDIR)/include
  86
  87 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  88          @HDEFINES@ \
  89          @INCINTL@ \
  90          -DLOCALEDIR="\"$(datadir)/locale\"" \
  91          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  92
  93 HFILES = \
  94         arsup.h binemul.h bucomm.h budbg.h \
  95         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
  96         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  97         windmc.h
  98
  99 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 100 BUILT_SOURCES = $(GENERATED_HFILES)
 101
 102 CFILES = \
 103         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 104         coffdump.c coffgrok.c cxxfilt.c \
 105         dwarf.c debug.c dlltool.c dllwrap.c \
 106         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 107         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 108         nlmconv.c nm.c not-ranlib.c not-strip.c \
 109         objcopy.c objdump.c prdbg.c \
 110         od-xcoff.c od-macho.c \
 111         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 112         resbin.c rescoff.c resrc.c resres.c \
 113         size.c srconv.c stabs.c strings.c sysdump.c \
 114         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 115         windres.c winduni.c wrstabs.c \
 116         windmc.c mclex.c
 117
 118 GENERATED_CFILES = \
 119         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 120         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 121
 122 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 123 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 124
 125 # Extra object files for objdump
 126 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 127
 128 # Code shared by all the binutils.
 129 BULIBS = bucomm.c version.c filemode.c
 130
 131 # Code shared by the ELF related programs.
 132 ELFLIBS = elfcomm.c
 133
 134 BFDLIB = ../bfd/libbfd.la
 135
 136 OPCODES = ../opcodes/libopcodes.la
 137
 138 LIBIBERTY = ../libiberty/libiberty.a
 139
 140 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 141 po/POTFILES.in: @MAINT@ Makefile
 142         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 143           && mv tmp $(srcdir)/po/POTFILES.in
 144
 145 EXPECT = expect
 146 RUNTEST = runtest
 147
 148 CC_FOR_TARGET = ` \
 149   if [ -f $$r/../gcc/xgcc ] ; then \
 150     if [ -f $$r/../newlib/Makefile ] ; then \
 151       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 152     else \
 153       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 154     fi; \
 155   else \
 156     if [ "@host@" = "@target@" ] ; then \
 157       echo $(CC); \
 158     else \
 159       echo gcc | sed '$(transform)'; \
 160     fi; \
 161   fi`
 162
 163 check-DEJAGNU: site.exp
 164         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 165         r=`pwd`; export r; \
 166         LC_ALL=C; export LC_ALL; \
 167         EXPECT=$(EXPECT); export EXPECT; \
 168         runtest=$(RUNTEST); \
 169         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 170           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 171                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 172                         $(RUNTESTFLAGS); \
 173         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 174         fi
 175
 176 installcheck-local:
 177         /bin/sh $(srcdir)/sanity.sh $(bindir)
 178
 179 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 180 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 181 # non-empty until configure time.  Ugh!
 182 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 183 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 184 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 185 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 186 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 187 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 188 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 189 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 190 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 191 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 192 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 193 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 194 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 195 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 196 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 197 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 198 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 199 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 200 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 201 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 202 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 203
 204 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 205
 206 size_SOURCES = size.c $(BULIBS)
 207
 208 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 209
 210 strings_SOURCES = strings.c $(BULIBS)
 211
 212 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 213 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 214
 215 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 216 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 217
 218 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 219
 220 nm_new_SOURCES = nm.c $(BULIBS)
 221
 222 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 223 EXTRA_objdump_SOURCES = od-xcoff.c
 224 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 225
 226 objdump.@OBJEXT@:objdump.c
 227 if am__fastdepCC
 228         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 229         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 230 else
 231 if AMDEP
 232         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 233         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 234 endif
 235         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 236 endif
 237
 238 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 239
 240 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 241         emul_$(EMULATION).c $(BULIBS)
 242 EXTRA_ar_SOURCES = $(CFILES)
 243 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 244
 245 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 246         binemul.c emul_$(EMULATION).c $(BULIBS)
 247 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 248
 249 addr2line_SOURCES = addr2line.c $(BULIBS)
 250
 251 # The following is commented out for the conversion to automake.
 252 # This rule creates a single binary that switches between ar and ranlib
 253 # by looking at argv[0].  Use this kludge to save some disk space.
 254 # However, you have to install things by hand.
 255 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 256 # Alternatively, you can install ranlib.sh as ranlib.
 257 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 258 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 259 #       -rm -f $(RANLIB_PROG)
 260 #       -ln $(AR_PROG) $(RANLIB_PROG)
 261 #
 262 # objcopy and strip in one binary that uses argv[0] to decide its action.
 263 #
 264 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 265 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 266 #       -rm -f $(STRIP_PROG)
 267 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 268
 269 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 270         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 271         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 272         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 273
 274 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 275         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 276
 277 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 278         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 279
 280 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 281         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 282
 283 sysinfo.@OBJEXT@: sysinfo.c
 284         if [ -r sysinfo.c ]; then \
 285           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 286         else \
 287           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 288         fi
 289
 290 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 291         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 292
 293 embedspu: embedspu.sh Makefile
 294         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 295         chmod a+x $@
 296
 297 # We need these for parallel make.
 298 sysinfo.h: sysinfo.c
 299
 300 # Disable -Werror, if it has been enabled, since old versions of bison/
 301 # yacc will produce working code which contain compile time warnings.
 302 arparse.@OBJEXT@: arparse.c
 303 if am__fastdepCC
 304         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 305         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 306 else
 307 if AMDEP
 308         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 309         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 310 endif
 311         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 312 endif
 313
 314 arlex.@OBJEXT@: arlex.c
 315 if am__fastdepCC
 316         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 317         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 318 else
 319 if AMDEP
 320         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 321         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 322 endif
 323         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 324 endif
 325
 326 sysroff.@OBJEXT@: sysroff.c
 327 if am__fastdepCC
 328         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 329         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 330 else
 331 if AMDEP
 332         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 333         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 334 endif
 335         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 336 endif
 337
 338 defparse.@OBJEXT@: defparse.c
 339 if am__fastdepCC
 340         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 341         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 342 else
 343 if AMDEP
 344         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 345         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 346 endif
 347         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 348 endif
 349
 350 deflex.@OBJEXT@: deflex.c
 351 if am__fastdepCC
 352         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 353         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 354 else
 355 if AMDEP
 356         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 357         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 358 endif
 359         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 360 endif
 361
 362 nlmheader.@OBJEXT@: nlmheader.c
 363 if am__fastdepCC
 364         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 365         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 366 else
 367 if AMDEP
 368         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 369         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 370 endif
 371         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 372 endif
 373
 374 rcparse.@OBJEXT@: rcparse.c
 375 if am__fastdepCC
 376         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 377         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 378 else
 379 if AMDEP
 380         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 381         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 382 endif
 383         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 384 endif
 385
 386 mcparse.@OBJEXT@: mcparse.c
 387 if am__fastdepCC
 388         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 389         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 390 else
 391 if AMDEP
 392         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 393         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 394 endif
 395         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 396 endif
 397
 398 rclex.@OBJEXT@: rclex.c
 399 if am__fastdepCC
 400         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 401         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 402 else
 403 if AMDEP
 404         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 405         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 406 endif
 407         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 408 endif
 409
 410 mclex.@OBJEXT@: mclex.c
 411 if am__fastdepCC
 412         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 413         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 414 else
 415 if AMDEP
 416         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 417         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 418 endif
 419         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 420 endif
 421
 422 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 423 srconv.@OBJEXT@: sysroff.c
 424
 425 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 426 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 427
 428 dlltool.@OBJEXT@:
 429 if am__fastdepCC
 430         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 431         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 432 else
 433 if AMDEP
 434         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 435         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 436 endif
 437         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 438 endif
 439
 440 rescoff.@OBJEXT@:
 441 if am__fastdepCC
 442         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 443         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 444 else
 445 if AMDEP
 446         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 447         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 448 endif
 449         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 450 endif
 451
 452 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 453
 454 sysdump_SOURCES = sysdump.c $(BULIBS)
 455 sysdump.@OBJEXT@: sysroff.c
 456
 457 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 458 # scripts, since they are only included conditionally.
 459 nlmconv.@OBJEXT@: nlmconv.c
 460 if am__fastdepCC
 461         ldname=`echo ld | sed '$(transform)'`; \
 462         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 463           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 464         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 465 else
 466 if AMDEP
 467         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 468         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 469 endif
 470         ldname=`echo ld | sed '$(transform)'`; \
 471         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 472 endif
 473
 474 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 475
 476 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 477         winduni.c resres.c $(BULIBS)
 478 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 479
 480 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 481         winduni.c $(BULIBS)
 482 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 483
 484 dllwrap_SOURCES = dllwrap.c version.c
 485 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 486
 487
 488 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 489         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 490         mcparse.h mcparse.c embedspu.sh
 491
 492 diststuff: $(EXTRA_DIST) info
 493 all: info
 494
 495 # We extract version from bfd/configure.in, make sure to rerun configure
 496 # when BFD's version changes.
 497 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 498
 499 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 500
 501 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 502   binutils.log binutils.sum abcdefgh*
 503 mostlyclean-local:
 504         -rm -rf tmpdir
 505
 506 .PHONY: install-exec-local
 507
 508 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 509         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 510           if test -f $$p$(EXEEXT); then \
 511             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 512             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 513           else :; fi; \
 514         done
 515         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 516         for i in $(TOOL_PROGS); do \
 517           if [ -f $$i$(EXEEXT) ]; then \
 518             j=`echo $$i | sed -e 's/-new//'`; \
 519             k=`echo $$j | sed '$(transform)'`; \
 520             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 521               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 522               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 523                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 524             fi; \
 525           else true; \
 526           fi; \
 527         done