1 # Makefile for GNU binary-file utilities
2 # Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
4 # This file is part of GNU binutils.
6 # This program is free software; you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation; either version 2 of the License, or
9 # (at your option) any later version.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program; if not, write to the Free Software
18 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 program_transform_name
=
25 exec_prefix = $(prefix)
26 bindir = $(exec_prefix)/bin
27 libdir = $(exec_prefix)/lib
28 tooldir
= $(exec_prefix)/$(target_alias
)
30 datadir = $(prefix)/lib
31 mandir = $(prefix)/man
32 man1dir = $(mandir)/man1
33 man2dir = $(mandir)/man2
34 man3dir = $(mandir)/man3
35 man4dir = $(mandir)/man4
36 man5dir = $(mandir)/man5
37 man6dir = $(mandir)/man6
38 man7dir = $(mandir)/man7
39 man8dir = $(mandir)/man8
40 man9dir = $(mandir)/man9
41 infodir = $(prefix)/info
42 includedir = $(prefix)/include
43 docdir
= $(datadir)/doc
47 INSTALL
= `cd $(srcdir)/..;pwd`/install.sh
-c
48 INSTALL_PROGRAM
= $(INSTALL
)
49 INSTALL_DATA
= $(INSTALL
)
50 INSTALL_XFORM
= $(INSTALL
) -t
='$(program_transform_name)'
51 INSTALL_XFORM1
= $(INSTALL_XFORM
) -b
=.1
67 BISON
= `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
68 # Comment these out if using lex.
70 LEX
= `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
72 # Distribution version
75 DIST_NAME
=binutils-
${VERSION}
77 version
=`./../gcc/gcc -dumpversion`
79 # Where to find texinfo.tex to format docn with TeX
80 TEXIDIR
= $(srcdir)/..
/texinfo
84 # these two are almost the same program
88 # objcopy and strip should be the same program
94 # These should all be the same program too.
99 # This is the demangler, as a standalone program.
100 # Note: This one is used as the installed name too, unlike the above.
101 DEMANGLER_PROG
=c
++filt
105 SRCONV_PROG
=srconv sysdump coffdump
107 MANPAGES
= ar nm objdump ranlib size strings
strip objcopy nlmconv
109 PROGS
= $(SIZE_PROG
) $(OBJDUMP_PROG
) $(NM_PROG
) $(AR_PROG
) $(STRINGS_PROG
) $(STRIP_PROG
) $(RANLIB_PROG
) $(DEMANGLER_PROG
) $(OBJCOPY_PROG
) $(BUILD_NLMCONV
) $(BUILD_SRCONV
) $(SYSINFO_PROG
)
110 STAGESTUFF
= $(PROGS
) *.o
111 # Files that can be generated, but should be in the distribution.
112 DISTSTUFF
=arparse.c arlex.c nlmheader.c sysinfo.c syslex.c
info
114 # Stuff that goes in tooldir/ if appropriate
115 TOOL_PROGS
= nm.new
strip.new
ar ranlib
117 BASEDIR
= $(srcdir)/..
118 BFDDIR
= $(BASEDIR
)/bfd
119 INCDIR
= $(BASEDIR
)/include
120 INCLUDES
= -I.
-I
$(srcdir) -I..
/bfd
-I
$(BFDDIR
) -I
$(INCDIR
)
122 #### host and target dependant Makefile fragments come in here.
125 ALL_CFLAGS
= $(INCLUDES
) $(HDEFINES
) $(TDEFINES
) $(CFLAGS
)
128 $(CC
) -c
$(ALL_CFLAGS
) $<
131 ## Random definitions
132 # Hopefully all these may be flushed once we get configuration down pat.
134 # alloca only needed for systems which don't have it and when cc != gcc.
137 # nm tries to malloc enough space for the string table. The old GNU malloc
138 # rounds this up to a power of two (e.g. 5M becomes 8M), and so it might
139 # fail unnecessarily. I've also seen some Unix malloc's fail, even when
140 # there is enough memory. So use the new GNU malloc.
142 # Use this if the system malloc is good enough.
145 # Use the GNU getopt unless you have problems with it.
146 # The IRIS version could probably benefit from being assembled with
147 # libmalloc rather than the ordinary malloc.
148 LIBIBERTY
= ..
/libiberty
/libiberty.a
150 # Code shared by all the binutils.
151 BULIBS
= bucomm.o version.o filemode.o
153 ADDL_LIBS
= $(MALLOC
) $(BULIBS
) $(BFD
) $(LIBIBERTY
)
155 BFD
= ..
/bfd
/libbfd.a
156 OPCODES
= ..
/opcodes
/libopcodes.a
163 "RUNTEST=$(RUNTEST)" \
164 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
169 all: $(ADDL_LIBS
) $(PROGS
)
172 if
[ -f testsuite
/Makefile.in
]; then \
173 (rootme
=`pwd`/ ; export rootme
; \
174 rootsrc
=`cd $(srcdir); pwd`/ ; export rootsrc
; \
175 cd testsuite
; $(MAKE
) FLAGS_TO_PASS
=$(FLAGS_TO_PASS
)); \
179 rootme
=`pwd`; export rootme
; cd testsuite
; \
180 $(MAKE
) check $(FLAGS_TO_PASS
)
183 /bin
/sh
$(srcdir)/sanity.sh
$(bindir)
189 $(SIZE_PROG
): $(ADDL_LIBS
) size.o
$(BFD
)
190 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(SIZE_PROG
) size.o
$(ADDL_LIBS
) $(EXTRALIBS
)
192 $(OBJCOPY_PROG
): $(ADDL_LIBS
) objcopy.o not-strip.o
$(BFD
)
193 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(OBJCOPY_PROG
) objcopy.o not-strip.o
$(ADDL_LIBS
) $(EXTRALIBS
)
195 $(STRINGS_PROG
): $(ADDL_LIBS
) strings.o
$(BFD
)
196 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(STRINGS_PROG
) strings.o
$(ADDL_LIBS
) $(EXTRALIBS
)
198 $(STRIP_PROG
): $(ADDL_LIBS
) objcopy.o is-strip.o
$(BFD
)
199 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(STRIP_PROG
) objcopy.o is-strip.o
$(ADDL_LIBS
) $(EXTRALIBS
)
201 $(NM_PROG
): $(ADDL_LIBS
) nm.o
$(BFD
)
202 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(NM_PROG
) nm.o
$(ADDL_LIBS
) $(EXTRALIBS
)
204 $(OBJDUMP_PROG
): $(ADDL_LIBS
) objdump.o
$(BFD
) $(OPCODES
)
205 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(OBJDUMP_PROG
) objdump.o
$(OPCODES
) $(ADDL_LIBS
) $(EXTRALIBS
)
207 underscore.c
: Makefile
209 echo
'/*WARNING: This file is automatically generated!*/' >underscore.t
210 echo
"int prepends_underscore = $(UNDERSCORE);" >>underscore.t
211 mv
-f underscore.t underscore.c
213 version.o
: version.c Makefile
214 $(CC
) $(INCLUDES
) $(HDEFINES
) $(TDEFINES
) -DVERSION
='"$(VERSION)"' $(CFLAGS
) -c
$(srcdir)/version.c
216 cplus-dem.o
: $(BASEDIR
)/libiberty
/cplus-dem.c
$(INCDIR
)/getopt.h
217 $(CC
) -c
-DMAIN
$(INCLUDES
) $(HDEFINES
) $(TDEFINES
) $(CFLAGS
) $(BASEDIR
)/libiberty
/cplus-dem.c
219 $(DEMANGLER_PROG
): cplus-dem.o
$(LIBIBERTY
) underscore.o version.o
220 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(DEMANGLER_PROG
) cplus-dem.o
$(LIBIBERTY
) $(EXTRALIBS
) underscore.o version.o
223 $(BISON
) $(BISONFLAGS
) $(srcdir)/arparse.y
224 mv
-f y.tab.c arparse.c
225 mv
-f y.tab.h arparse.h
227 # Separate from arparse.c so that a parallel make doesn't try to build
228 # both arparse.c and arparse.h simultaneously.
232 $(LEX
) $(LEX_OPTIONS
) $(srcdir)/arlex.l
235 $(AR_PROG
): $(ADDL_LIBS
) ar.o arparse.o arlex.o not-ranlib.o
$(BFD
) arsup.o
236 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(AR_PROG
) ar.o arparse.o arlex.o arsup.o not-ranlib.o
$(ADDL_LIBS
) $(EXTRALIBS
)
238 $(RANLIB_PROG
): $(ADDL_LIBS
) ar.o is-ranlib.o arparse.o arlex.o arsup.o
$(BFD
)
239 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(RANLIB_PROG
) ar.o arparse.o arlex.o arsup.o is-ranlib.o
$(ADDL_LIBS
) $(EXTRALIBS
)
241 # This rule creates a single binary that switches between ar and ranlib
242 # by looking at argv[0]. Use this kludge to save some disk space.
243 # However, you have to install things by hand.
244 # (That is after 'make install', replace the installed ranlib by a link to ar.)
246 # Alternatively, you can install ranlib.sh as ranlib.
248 ar_with_ranlib
: $(ADDL_LIBS
) ar.o maybe-ranlib.o
$(BFD
)
249 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(AR_PROG
) ar.o maybe-ranlib.o
$(ADDL_LIBS
) $(EXTRALIBS
)
250 -rm -f
$(RANLIB_PROG
)
251 -ln
$(AR_PROG
) $(RANLIB_PROG
)
253 # objcopy and strip in one binary that uses argv[0] to decide its action.
255 objcopy_with_strip
: $(ADDL_LIBS
) objcopy.o maybe-strip.o
$(BFD
)
256 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$(OBJCOPY_PROG
) objcopy.o maybe-strip.o
$(ADDL_LIBS
) $(EXTRALIBS
)
258 -ln
$(OBJCOPY_PROG
) $(STRIP_PROG
)
260 sysroff.c
: sysinfo sysroff.
info
261 .
/sysinfo
-c
<$(srcdir)/sysroff.
info >sysroff.c
262 .
/sysinfo
-i
<$(srcdir)/sysroff.
info >>sysroff.c
263 .
/sysinfo
-g
<$(srcdir)/sysroff.
info >>sysroff.c
265 sysroff.h
: sysinfo sysroff.
info
266 .
/sysinfo
-d
<$(srcdir)/sysroff.
info >sysroff.h
268 # Depend upon arparse.c to avoid building both arparse.c and sysinfo.c
270 sysinfo.c
: sysinfo.y arparse.c
271 $(BISON
) -tvd
$(srcdir)/sysinfo.y
273 mv
-f y.tab.c sysinfo.c
274 mv
-f y.tab.h sysinfo.h
276 # Separate from sysinfo.c so that a parallel make doesn't try to build
277 # both sysinfo.c and sysinfo.h simultaneously.
281 $(LEX
) $(LEX_OPTIONS
) $(srcdir)/syslex.l
284 sysinfo
: sysinfo.o syslex.o
285 $(CC_FOR_BUILD
) $(CFLAGS
) $(LDFLAGS
) -o
$@ sysinfo.o syslex.o
287 syslex.o
: syslex.c sysinfo.h
288 if
[ -r syslex.c
]; then \
289 $(CC_FOR_BUILD
) -c
-I.
$(CFLAGS
) syslex.c
; \
291 $(CC_FOR_BUILD
) -c
-I.
$(CFLAGS
) $(srcdir)/syslex.c
;\
295 if
[ -r sysinfo.c
]; then \
296 $(CC_FOR_BUILD
) -c
-I.
$(CFLAGS
) sysinfo.c
; \
298 $(CC_FOR_BUILD
) -c
-I.
$(CFLAGS
) $(srcdir)/sysinfo.c
; \
301 srconv.o
: srconv.c sysroff.h sysroff.c coffgrok.h
$(INCDIR
)/coff
/internal.h \
304 srconv
: srconv.o coffgrok.o
$(ADDL_LIBS
)
305 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ srconv.o coffgrok.o
$(ADDL_LIBS
) $(EXTRALIBS
)
307 coffdump
: coffdump.o coffgrok.o
$(ADDL_LIBS
)
308 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ coffdump.o coffgrok.o
$(ADDL_LIBS
) $(EXTRALIBS
)
310 sysdump.o
: sysdump.c sysroff.h
312 sysdump
: sysdump.o
$(ADDL_LIBS
)
313 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ sysdump.o
$(ADDL_LIBS
) $(EXTRALIBS
)
315 # Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c
317 nlmheader.c
: nlmheader.y sysinfo.c
318 $(BISON
) $(srcdir)/nlmheader.y
320 mv
-f y.tab.c nlmheader.c
323 ldname
=`t='$(program_transform_name)'; echo ld | sed -e "s/brokensed/brokensed/" $$t`; \
324 $(CC
) -c
-DLD_NAME
="\"$${ldname}\"" $(INCLUDES
) $(HDEFINES
) $(TDEFINES
) $(NLMCONV_DEFS
) $(CFLAGS
) $(srcdir)/nlmconv.c
326 $(NLMCONV_PROG
): nlmconv.o nlmheader.o
$(ADDL_LIBS
) $(BFD
)
327 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ nlmconv.o nlmheader.o
$(ADDL_LIBS
) $(EXTRALIBS
)
329 # This list of dependencies was generated by doing a make with gcc -MM
330 # saving the output in a file and removing the gcc commands
331 # changing "../../devo/binutils/../bfd" to "$(BFDDIR)"
332 # removing "../../devo/binutils/"
333 # changing "../include" to "$(INCDIR)"
335 bucomm.o
: bucomm.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
336 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
337 $(INCDIR
)/fopen-same.h bucomm.h
338 filemode.o
: filemode.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
339 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
340 $(INCDIR
)/fopen-same.h
341 size.o
: size.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
342 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
343 $(INCDIR
)/fopen-same.h
$(INCDIR
)/getopt.h
344 objdump.o
: objdump.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
345 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
346 $(INCDIR
)/fopen-same.h
$(INCDIR
)/getopt.h \
347 $(INCDIR
)/dis-asm.h
$(INCDIR
)/aout
/aout64.h \
348 $(INCDIR
)/elf
/internal.h
$(INCDIR
)/aout
/stab.def
349 nm.o
: nm.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
350 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
351 $(INCDIR
)/fopen-same.h bucomm.h
$(INCDIR
)/getopt.h \
352 $(INCDIR
)/aout
/stab_gnu.h
$(INCDIR
)/aout
/stab.def \
353 $(INCDIR
)/aout
/ranlib.h
$(INCDIR
)/demangle.h
354 ar.o
: ar.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
355 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
356 $(INCDIR
)/fopen-same.h bucomm.h
$(INCDIR
)/aout
/ar.h \
357 $(BFDDIR
)/libbfd.h arsup.h
358 arparse.o
: arparse.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
359 $(INCDIR
)/obstack.h arsup.h
360 arlex.o
: arlex.c .
/arparse.h
361 not-ranlib.o
: not-ranlib.c
362 arsup.o
: arsup.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
363 $(INCDIR
)/obstack.h arsup.h bucomm.h
364 strings.o
: strings.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
365 $(INCDIR
)/obstack.h bucomm.h
366 objcopy.o
: objcopy.c ..
/bfd
/bfd.h
$(INCDIR
)/ansidecl.h \
367 $(INCDIR
)/obstack.h ..
/bfd
/sysdep.h
$(BFDDIR
)/hosts
/std-host.h \
368 $(INCDIR
)/fopen-same.h bucomm.h
369 is-strip.o
: is-strip.c
370 is-ranlib.o
: is-ranlib.c
371 not-strip.o
: not-strip.c
372 nlmheader.o
: nlmheader.c ..
/bfd
/bfd.h ..
/bfd
/sysdep.h \
373 $(BFDDIR
)/hosts
/std-host.h
$(INCDIR
)/fopen-same.h bucomm.h \
374 $(INCDIR
)/nlm
/common.h
$(INCDIR
)/nlm
/internal.h nlmconv.h
375 nlmconv.o
: nlmconv.c ..
/bfd
/bfd.h
$(INCDIR
)/libiberty.h ..
/bfd
/sysdep.h \
376 $(BFDDIR
)/hosts
/std-host.h
$(INCDIR
)/fopen-same.h bucomm.h \
377 $(BFDDIR
)/libnlm.h
$(INCDIR
)/nlm
/common.h \
378 $(INCDIR
)/nlm
/internal.h
$(INCDIR
)/nlm
/external.h nlmconv.h \
379 $(INCDIR
)/coff
/sym.h
$(INCDIR
)/coff
/ecoff.h
383 - mv
-f
$(STAGESTUFF
) stage1
387 - mv
-f
$(STAGESTUFF
) stage2
391 - mv
-f
$(STAGESTUFF
) stage3
396 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
399 - (cd stage1
; mv
-f
* ..
)
403 - (cd stage2
; mv
-f
* ..
)
407 - (cd stage3
; mv
-f
* ..
)
410 ######################################################################
411 # DOCUMENTATION TARGETS
413 binutils.
dvi: $(srcdir)/binutils.texi
414 TEXINPUTS
=$(TEXIDIR
):$$TEXINPUTS $(TEXI2DVI
) $(srcdir)/binutils.texi
416 # info file for online browsing
417 binutils.
info: $(srcdir)/binutils.texi
418 $(MAKEINFO
) -o binutils.
info $(srcdir)/binutils.texi
420 $(DEMANGLER_PROG
).1: cxxfilt.man Makefile
421 sed
-e
's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
422 > $(DEMANGLER_PROG
).1
424 # different targets for -ms, -mm, -me
425 # Try to use a recent texi2roff. v2 was put on prep in jan91.
426 # If you want an index, see texi2roff doc for postprocessing
427 # and add -i to texi2roff invocations below.
428 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
429 # corresponding -e lines when later texi2roff's are current)
430 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
431 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
432 # + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
433 # + @alphaenumerate is ridiculously new, turned into @enumerate
436 binutils.ms
: $(srcdir)/binutils.texi
437 sed
-e
'/\\input texinfo/d' \
438 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
439 -e
'/^@ifinfo/,/^@end ifinfo/d' \
443 -e
's/^@alphaenumerate/@enumerate/g' \
444 -e
's/^@end alphaenumerate/@end enumerate/g' \
445 $(srcdir)/binutils.texi | \
447 sed
-e
's/---/\\(em/g' \
451 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
452 # try leaving them in
453 binutils.mm
: $(srcdir)/binutils.texi
454 sed
-e
'/\\input texinfo/d' \
455 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
456 -e
'/^@ifinfo/,/^@end ifinfo/d' \
461 -e
's/^@alphaenumerate/@enumerate/g' \
462 -e
's/^@end alphaenumerate/@end enumerate/g' \
463 $(srcdir)/binutils.texi | \
465 sed
-e
's/---/\\(em/g' \
469 binutils.me
: $(srcdir)/binutils.texi
470 sed
-e
'/\\input texinfo/d' \
471 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
472 -e
'/^@ifinfo/,/^@end ifinfo/d' \
476 -e
's/^@alphaenumerate/@enumerate/g' \
477 -e
's/^@end alphaenumerate/@end enumerate/g' \
478 $(srcdir)/binutils.texi | \
480 sed
-e
's/---/\\(em/g' \
484 ######################################################################
487 -rm -f
*.o
*~ \
#* core binutils.?? binutils.???
489 @if
[ -d testsuite
] ; then \
490 cd testsuite
; $(MAKE
) $(FLAGS_TO_PASS
) clean ; \
492 -rm -f
$(PROGS
) underscore.c
494 @if
[ -d testsuite
] ; then \
495 cd testsuite
; $(MAKE
) $(FLAGS_TO_PASS
) distclean ; \
497 -rm -f Makefile config.status sysdep.h
*.o
*~ \
#* core y.* \
498 binutils.?? binutils.??s binutils.aux binutils.log binutils.toc
499 -rm -f
$(PROGS
) underscore.c
500 realclean: clean distclean
501 -rm -f
$(DISTSTUFF
) TAGS
506 etags
$(INCDIR
)/*.h
$(srcdir)/*.
[hc
]
508 install: all $(DEMANGLER_PROG
).1
509 for i in
$(PROGS
) ; do \
510 $(INSTALL_XFORM
) $$i $(bindir)/`echo $$i | sed -e 's/.new//'` ; \
512 for i in
$(MANPAGES
) ; do \
513 $(INSTALL_XFORM1
) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
515 $(INSTALL_XFORM1
) $(DEMANGLER_PROG
).1 $(man1dir)/$(DEMANGLER_PROG
).1
516 -if
[ -d
$(tooldir
) ]; then \
517 if
[ -d
$(tooldir
)/bin
]; then true
; else mkdir
$(tooldir
)/bin
; fi
; \
518 for i in
$(TOOL_PROGS
) ; do \
519 j
=`echo $$i | sed -e 's/.new//'`; \
520 rm -f
$(tooldir
)/bin
/$$j; \
521 k
=`t='$(program_transform_name)'; echo $$j | sed -e s/x/x/ $$t`; \
522 ln
$(bindir)/$$k $(tooldir
)/bin
/$$j >/dev
/null
2>/dev
/null \
523 ||
$(INSTALL_PROGRAM
) $$i $(tooldir
)/bin
/$$j; \
527 # This little path search is required because in the FSF net releases,
528 # the info files are included in the source tree, and that may not be
529 # the same as the build directory.
530 install-info
: binutils.
info
531 if
[ -r binutils.
info ]; then \
536 for i in
`cd $$dir; echo binutils.info*` ; do \
537 $(INSTALL_DATA
) $$i $(infodir)/$$i ; \
544 # cvs rtag binutils-x-yy ld+utils
545 # cvs co -r binutils-x-yy ld+utils
547 # cd {HERE}; make dist [-f Makefile.in]
549 dist: $(DIST_NAME
).
tar.z
551 diststuff
: $(DISTSTUFF
)
554 cd ..
/..
; rm -f
$(DIST_NAME
); ln
-s devo
$(DIST_NAME
)
555 make diststuff
-f Makefile.in
556 cd ..
/ld; make diststuff
-f Makefile.in
557 cd ..
/gprof
; make diststuff
-f Makefile.in
558 cd ..
/texinfo
; mv texinfo.
tex ..
; rm -rf
*; mv ..
/texinfo.
tex .
559 # Take out texinfo from configurable dirs
560 mv ..
/configure.in tmp
; \
561 sed
-e
'/^host_tools=/s/texinfo //' <tmp
>..
/configure.in
; rm tmp
562 cd ..
; chmod og
=u
`find . -print`
563 cd ..
/..
; tar chf
- $(DIST_NAME
) | gzip
>$(DIST_NAME
).
tar.z
564 rm -rf ..
/..
/$(DIST_NAME
)
566 #-----------------------------------------------------------------------------
567 # 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
569 # 'VERSION' file must be present and contain a string of the form "x.y"
570 #-----------------------------------------------------------------------------
574 echo
"char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
577 # Dummy target to force execution of dependent targets.
581 # Target to uncomment host-specific lines in this makefile. Such lines must
582 # have the following string beginning in column 1: #__<hostname>__#
583 # Original Makefile is backed up as 'Makefile.old'.
585 # Invoke with: make make HOST=xxx
588 -@if
test $(HOST
)x
= x
; then \
589 echo
'\aSpecify "make make HOST=???"'; \
592 grep
-s
"^#The next line was generated by 'make make'" Makefile
; \
593 if
test $$?
= 0 ; then \
594 echo
"\aMakefile has already been processed with 'make make'";\
597 mv
-f Makefile Makefile.old
; \
598 echo
"#The next line was generated by 'make make'" >Makefile
; \
599 echo
"HOST=$(HOST)" >>Makefile
; \
601 sed
"s/^#__$(HOST)__#//" < Makefile.old
>>Makefile
603 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
604 $(SHELL
) .
/config.status
606 ### Local Variables: ***
607 ### mode:fundamental ***
608 ### page-delimiter: "^#\f" ***