3 * This version of binutils fixes a problem with PowerPC VLE 16A and 16D
4 relocations which were functionally swapped, for example,
5 R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D
6 performed like R_PPC_VLE_HA16A. This could have been fixed by
7 renumbering relocations, which would keep object files created by an
8 older version of gas compatible with a newer ld. However, that would
9 require an ABI update, affecting other assemblers and linkers that
10 create and process the relocations correctly. It is recommended that
11 all VLE object files be recompiled, but ld can modify the relocations
12 if --vle-reloc-fixup is passed to ld. If the new ld command line
13 option is not used, ld will ld warn on finding relocations inconsistent
14 with the instructions being relocated.
16 * The nm program has a new command line option (--with-version-strings)
17 which will display a symbol's version information, if any, after the
20 * The ARC port of objdump now accepts a -M option to specify the extra
21 instruction class(es) that should be disassembled.
23 * The --remove-section option for objcopy and strip now accepts section
24 patterns starting with an exclamation point to indicate a non-matching
25 section. A non-matching section is removed from the set of sections
26 matched by an earlier --remove-section pattern.
28 * The --only-section option for objcopy now accepts section patterns
29 starting with an exclamation point to indicate a non-matching section.
30 A non-matching section is removed from the set of sections matched by
31 an earlier --only-section pattern.
33 * New --remove-relocations=SECTIONPATTERN option for objcopy and strip.
34 This option can be used to remove sections containing relocations.
35 The SECTIONPATTERN is the section to which the relocations apply, not
36 the relocation section itself.
40 * Add a configure option, --enable-64-bit-archive, to force use of a
41 64-bit format when creating an archive symbol index.
43 * Add --elf-stt-common= option to objcopy for ELF targets to control
44 whether to convert common symbols to the STT_COMMON type.
48 * Add option to objcopy to insert new symbols into a file:
49 --add-symbol <name>=[<section>:]<value>[,<flags>]
51 * Add support for the ARC EM/HS, and ARC600/700 architectures.
53 * Extend objcopy --compress-debug-sections option to support
54 --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF
57 * Add --update-section option to objcopy.
59 * Add --output-separator option to strings.
63 * Add --data option to strings to only print strings in loadable, initialized
64 data sections. Change the default behaviour to be --all, but add a new
65 configure time option of --disable-default-strings-all to restore the old
68 * Add --include-all-whitespace to strings.
70 * Add --dump-section option to objcopy.
72 * Add support for the Andes NDS32.
76 * Objcopy now supports wildcard characters in command line options that take
79 * Add support for Altera Nios II.
83 * Add support for the VLE extension to the PowerPC architecture.
85 * Add support for x64 Windows target of the delayed-load-library.
87 * Add support for the Renesas RL78 architecture.
91 * Add support for displaying the contents of .debug.macro sections.
93 * Add --preprocessor-arg option to windres to specify additional options
94 passed to preprocessor.
96 * Add --dwarf-start and --dwarf-end to readelf and objdump. These are used by
97 the new Emacs mode, see dwarf-mode.el.
99 * Add support for the Tilera TILEPro and TILE-Gx architectures.
103 * Add --interleave-width option to objcopy to allowing copying a range of
104 bytes from the input to the output with the --interleave option.
106 * Add support for the TMS320C6000 (TI C6X) processor family.
108 * Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab) using
109 the -u / --unwind option.
111 * Add --dyn-syms to readelf to dump dynamic symbol table.
113 * A new tool - elfedit - has been added to directly manipulate ELF format
116 * Add to dlltool .def file feature of aliasing PE internal symbol name by
119 * Add a new command line option -a / --addresses to addr2line to display the
120 address before function name or source filename.
122 * Add a new command line option -p / --pretty-print to addr2line to have
123 a more human readable output.
125 * The hppa/som targets can now be compiled on any host.
129 * Add support for delay importing to dlltool. Use the --output-delaylib <file>
130 switch to create a delay-import library. The resulting app will load the dll
131 as soon as the first function is called. It will link to __delayLoadHelper2()
132 from the static delayimp library, which will import LoadLibraryA and
133 GetProcAddress from kernel32.
135 * Add a new command line option, --insn-width=WIDTH, to objdump to specify
136 number of bytes to be displayed on a single line when disassembling
139 * Readelf can now display the relocated contents of a section as a sequence
140 of bytes via the --relocated-dump=<name|number> command line option.
142 * The gprof program has been given a new command line option:
143 --external-symbols-table=<filename> which reads in symbols from a specified
146 * The plugin target has been added to bfd. It can load the same shared objects
147 used by gold and uses them to provide basic support for new file formats.
149 * The verilog memory hex dump file format is now supported as an output format
152 * Add --file-alignment, --heap, --image-base, --section-alignment,
153 --stack and --subsystem command line options to objcopy, which will
154 set PE optional header.
156 * Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w.
158 * --as-needed now links in a dynamic library if it satisfies undefined
159 symbols in regular objects, or in other dynamic libraries. In the
160 latter case the library is not linked if it is found in a DT_NEEDED
161 entry of one of the libraries already linked.
163 * Added --prefix=PREFIX and --prefix-strip=LEVEL switches to objdump to
164 add absolute paths for -S.
166 * Add new option --use-nul-prefixed-import-tables to dlltool to allow fall-
167 back to old import table generation with null element prefix.
169 * Added --identify-strict switch to cause --identify <implib> to
170 report an error when the import library is associated with
173 * Added --identify <implib> option to dlltool, which determines the
174 name of the DLL associated with the specified <implib>.
176 * Support for PowerPC booke64 instructions has been removed. The assembler no
177 longer accepts -mbooke32 or -mbooke64 and the disassembler no longer accepts
178 -Mbooke32 or -Mbooke64. Instead, -mbooke and -Mbooke should be used.
182 * Added -wL switch to dump decoded contents of .debug_line.
184 * Added support for "thin" archives which contain pathnames pointing to
185 object files rather than the files themselves and which contain a
186 flattened symbol index for all objects, and archives, which have been
187 added to the archive.
189 * Added -F switch to objdump to include file offsets in the disassembly.
191 * Added -c switch to readelf to allow string dumps of archive symbol index.
193 * Support for SSE5 has been added to the i386 port.
195 * Added -p switch to readelf to allow string dumps of sections.
199 * Resolved 37 coding problems in bfd including static array overruns, null
200 pointer dereferences and use of a malloc buffer after it has been freed, as
201 revealed by static analysis donated by Coverity, Inc. (http://scan.coverity.com).
203 * The binutils sources are now released under version 3 of the GNU General
206 * A new tool "windmc" has been added for some targets. This is a message
207 compiler which attempts to be compatible with the MS version.
209 * Add codepage support to the windres tool. It now supports many new
210 resource types (e.g. MANIFEST, TOOLBAR, etc). The output generation
211 for binary files is done now via bfd itself. The endianess problems
212 for different hosts are solved. Dumps of .res files can now be
213 re-compiled by windres without lossing resources or compilation errors.
214 Some problems on dialog resource translations are corrected.
216 * Add --extract-symbol command line option to objcopy, which will
217 strip everything out of an ordinary object file or executable except
218 for its symbol table. Files containing just symbols can be useful
223 * Add "-x NAME" to readelf in addition to "-x NUMBER".
225 * Add -i and -t switches to cxxfilt. -i disables the display of implementation
226 specific extra demangling information (if any) and -t disables the demangling
229 * Add support for the "@<file>" syntax to the command lines of all tools, so
230 that extra switches can be read from <file>.
232 * Add "-W/--dwarf" to objdump to display the contents of the DWARF
235 * Add "-t/--section-details" to readelf to display section details.
236 "-N/--full-section-name" is deprecated.
238 * powerpc-linux ld now supports a variant form of PLT and GOT for the security
239 conscious. This form will automatically be chosen when ld detects that all
240 code in regular object files was generated by gcc -msecure-plt. The old PLT
241 and GOT may be forced by a new ld option, --bss-plt.
243 * Add "-i/--inlines" to addr2line to print enclosing scope information
244 for inlined function chains, back to first non-inlined function.
246 * Add "-N/--full-section-name" to readelf to display full section name.
248 * Add "-M entry:<addr>" switch to objdump to specify a function entry address
249 when disassembling VAX binaries.
251 * Add "--globalize-symbol <name>" and "--globalize-symbols <filename>" switches
252 to objcopy to convert local symbols into global symbols.
254 * gprof now allows input files to have histogram records for
255 several memory ranges, provided those ranges are disjoint.
259 * Add "-g/--section-groups" to readelf to display section groups.
261 * objcopy recognizes two new options --strip-unneeded-symbol and
262 --strip-unneeded-symbols, namely for use together with the wildcard
263 matching the original --strip-symbol/--strip-symbols provided, but
264 retaining any symbols matching but needed by relocations.
266 * readelf can now display address ranges from .debug_range sections. This
267 happens automatically when a DW_AT_range attribute is encountered. The
268 command line switch --debug-dump=Ranges (or -wR) can also be used to display
269 the contents of the .debug_range section.
271 * nm and objdump now have a switch "--special-syms" to enable the displaying of
272 symbols which the target considers to be special. By default these symbols
273 are no longer displayed. Currently the only special symbols are the Mapping
274 symbols used by the ARM port to mark transitions between text and data and
275 between ARM and THUMB code.
277 * dlltool has a switch "--ext-prefix-alias <prefix>" to generate additional
278 import and export symbols with <preifx> prepended to them.
282 * objcopy for MIPS targets now accepts "-M no-aliases" as an option to the
283 disassembler to print the "raw" mips instruction mnemonic instead of some
284 pseudo instruction name. I.E. print "daddu" or "or" instead of "move",
285 "sll" instead of "nop", etc.
287 * objcopy and strip can now take wildcard patterns in symbol names specified on
288 the command line provided that the --wildcard switch is used to enable them.
290 * readelf can now parse archives.
292 * objdump now accepts --debugging-tags to print the debug information in a
293 format compatible with ctags tool.
295 * objcopy and strip now accept --only-keep-debug to create a file containing
296 those sections that would be stripped out by --strip-debug. The idea is that
297 this can be used in conjunction with the --add-gnu-debuglink switch to create
298 a two part program distribution - one a stripped executable and the other the
301 * objcopy now accepts --add-gnu-debuglink=<file> to insert a .gnu_debuglink
302 section into a (presumably stripped) executable. This allows the debug
303 information for the file to be held in a separate file.
305 * BFD marks the sections .comment and .note as 'n' in the BSD/POSIX
306 single-character representation. This can be checked by running nm
311 * Added --info switch to objcopy and strip.
313 * Support for Vitesse IQ2000 added by Red Hat.
315 * Added 'S' encoding to strings to allow the display of 8-bit characters.
317 * Added --prefix-symbols=<text>, --prefix-sections=<text> and
318 --prefix-alloc-sections=<text> to objcopy.
320 * readelf can handle the extensions to the DWARF2 spec used by the Unified
323 * BFD no longer declares a "boolean" type, to avoid clashes with other
324 headers that declare the same. Users of BFD should replace boolean,
325 false and true, with int, 0 and 1, or define their own boolean type.
327 * Support for IP2K added by Denis Chertykov.
331 * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400
334 Changes in version 2.12:
336 * Support for Don Knuth's MMIX, by Hans-Peter Nilsson.
338 * size: Add --totals to display summary of sizes (Berkeley format only).
340 * readelf: Add --wide option to not break section header or segment listing
341 lines to fit into 80 columns.
343 * strings: Add --encoding to display wide character strings. By Markus Kuhn.
345 * objcopy: Add --rename-section to change section names.
347 * readelf: Support added for DWARF 2.1 extensions. Support added for
348 displaying the contents of .debug.macinfo sections.
350 * New command line switches added to objcopy to allow symbols to be kept as
351 global symbols, and also to specify files containing lists of such symbols.
354 * Support for OpenRISC by Johan Rydberg.
356 * New command line switch to objcopy --alt-machine-code which creates a binary
357 with an alternate machine code if one is defined in the architecture
358 description. Only supported for ELF targets. By Alexandre Oliva.
360 * New command line switch to objcopy -B (or --binary-architecture) which sets
361 the architecture of the output file to the given argument. This option only
362 makes sense, if the input target is binary. Otherwise it is ignored.
365 * Support for PDP-11 by Lars Brinkhoff.
367 Changes in binutils 2.11:
369 * Add support for ARM v5t and v5te architectures and Intel's XScale ARM
372 * Add --srec-len and --srec-forceS3 command line switch to objcopy.
375 * Support for the MIPS32, by Anders Norlander.
377 * Support for the i860, by Jason Eckhardt.
379 * Support for CRIS (Axis Communications ETRAX series).
381 Changes in binutils 2.10:
383 * Support for 64-bit ELF on HPPA.
385 * New command line switch to objdump --file-start-context which shows the
386 entire file contents up to the source line first encountered for a given
389 * New command line switch to objdump -M (or --disassembler-options) which takes
390 a parameter which can then be interpreted on a per-target basis by the
391 disassembler. Used by ARM targets to select register name sets, ISA, APCS or
394 * objdump support for -mi386:intel which causes disassembly to be displayed
397 * New program: readelf. This displays the contents of ELF format files,
398 regardless of target machine.
400 * objcopy now takes --change-section-lma, --change-section-vma, and
401 --change-section-address options. The old --adjust-section-vma option is
402 equivalent to --change-section-address. The other --adjust-* options are now
403 renamed to --change-*, although --adjust-* continues to work.
405 * objcopy has a --redefine-sym option that lets you rename symbols.
407 * objcopy now takes a -j/--only-section option to copy only the specified
410 * dlltool now supports the IMPORTS command.
412 * dlltool now takes --export-all-symbols, --no-export-all-symbols,
413 --exclude-symbols, and --no-default-excludes options.
415 Changes in binutils 2.9:
417 * Added windres program, which can be used to manipulate resources in WIN32
418 files as used on Windows 95 and Windows NT.
420 * The objcopy --gap-fill and --pad-to options operate on the LMA rather than
421 the VMA of the sections.
423 * Added S modifier to ar to not build a symbol table.
425 Changes in binutils 2.8:
427 * The objdump disassembly format has been changed, and hopefully improved. Use
428 the new --prefix-addresses option to get the old format. There are also new
429 --disassemble-zeroes and --no-show-raw-insn options which affect disassembler
432 * Formats may now be specified as configuration triplets. For example,
433 objdump -b i386-pc-linux. The triplets are not passed through config.sub,
434 so they must be in canonical form.
436 * Added new addr2line program. This uses the debugging information to convert
437 an address into a file name and line number within a program.
439 * Added --change-leading-char argument to objcopy.
441 * Added --weaken argument to objcopy.
443 * objdump --dynamic-reloc now works on ELF executables and shared libraries.
445 * Added --adjust-vma option to objdump.
447 * Added -C/--demangle option to objdump.
449 * Added -p/--preserve-dates option to strip and objcopy.
451 Changes in binutils 2.7:
453 * Added --enable-shared and --enable-commonbfdlib options to configure.
455 * Added --debugging argument to objdump and objcopy.
457 * Added --defined-only argument to nm.
459 * Added --remove-leading-char argument to objcopy.
461 * The objdump --line-numbers option is now meaningful with --reloc.
463 * Added --line-numbers option to nm.
465 * Added --endian/-EB/-EL option to objdump.
467 * Added support for Alpha OpenVMS/AXP.
469 Changes in binutils 2.6:
471 * Added -N/--strip-symbol and -K/--keep-symbol arguments to strip and objcopy.
473 * Added several arguments to objcopy to provide some control over how the new
474 file is laid out in memory. Also added binary output format to BFD to permit
475 generating plain binary files.
477 * Added --start-address and --stop-address options to objdump.
479 * ar and ranlib now work on AIX. The tools are now built by default on AIX.
481 Changes in binutils 2.5:
483 * Changed objdump -dr to dump the relocs interspersed with the assembly
484 listing, for a more useful listing of relocatable files.
486 * Changed objdump -d/--disassemble to only disassemble SEC_CODE sections.
487 Added -D/--disassemble-all option to disassemble all sections.
489 * Added --size-sort option to nm.
491 * strip and objcopy should now be able to handle dynamically linked ELF
494 Changes in binutils 2.4:
496 * Support for HP-PA (by Jeff Law), i386 Mach (by David Mackenzie), RS/6000 and
497 PowerPC (except ar and ranlib; by Ian Taylor).
499 * Support for Irix 5.
501 * Programs `strip' and `objcopy' will not attempt to write dynamically linked
502 ELF output files, since BFD currently can't create them properly.
504 Changes in binutils 2.3:
506 * A new --stabs argument has been added to objdump to dump stabs sections in
509 * A new program, nlmconv, has been added. It can convert object files into
510 Novell NetWare Loadable Modules.
512 * The strings program has been added.
514 Changes in binutils 2.2:
516 * The 'copy' program has been renamed to 'objcopy', for consistency with
517 'objdump', and because 'copy' might more plausibly be used as a synonym for
520 * The new stand-alone program c++filt is a filter that converts encoded
521 (mangled) C++ assembly-level identifiers to user-level names. (Note: This
522 may get moved to the gcc distribution.)
524 * nm -o on an archive now prefixes each line with the archive name, matching
525 the output from BSD nm.
527 * ar (and ld) can now read (but not write) BSD4.4-style archives.
529 * New support for H8500, Z8000, and the Hitach SH.
531 * Dis-assembler interface changed to allow sharing with gdb.
533 * There is new Elf code, but it is not yet ready for general use.
535 * There is the beginnings of a test suite.
537 Changes in binutils 2.1:
539 * There is now support for writing ECOFF files, so ld and the other utilities
540 should work on Risc/Ultrix and Irix. Please let us know how well this works.
542 * ar now automatically creates a symbol table (a __.SYMDEF member, in the BSD
543 version), if there are any object files in the archive. So running ranlib is
544 now redundant (unless the non-standard q command is used). This is required
545 for Posix.2 conformance.
547 * The archive-reading code now reads both BSD-style and SYSV-style archives
548 independently of the selected target format. This is to encourage people to
549 switch to SYSV-format, which has a number of advantages.
551 * The strip and copy programs now have options to remove debug-symbols only
552 and/or local symbols only. They now also support long options.
555 Copyright (C) 2012-2016 Free Software Foundation, Inc.
557 Copying and distribution of this file, with or without modification,
558 are permitted in any medium without royalty provided the copyright
559 notice and this notice are preserved.