3 * The addr2line, c++filt, nm and objdump tools now have a limit on the
4 maximum amount of recursion that is allowed whilst demangling strings.
5 The value for this limit is defined by the DEMANGLE_RECRUSE_LIMIT
6 constant declared in the include/demangle.h header file. At the time
7 of writing this constant has the value of 2048.
9 The --no-recurse-limit option can be used to remove the limit, restoring
10 the behaviour of earlier versions of these tools. This may be needed in
11 order to dmangle truly complicated names, but it also leaves the tools
12 vulnerable to stack exhaustion from maliciously constructed mangled names.
14 * Objdump's --disassemble option can now take a parameter, specifying the
15 starting symbol for disassembly. Disassembly will continue from this
16 symbol up to the next symbol or the end of the function.
18 * The MIPS port now supports the Loongson 2K1000 processor which implements
19 the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE, Loongson-ext ASE,
20 Loongson-ext2 ASE and MSA ASE instructions. Add -march=gs264e option for
21 Loongson 2K1000 processor.
23 * The MIPS port now supports the Loongson 3A2000/3A3000 processor which
24 implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE,
25 Loongson-ext ASE and Loongson-ext2 ASE instructions. Add -march=gs464e
26 option for Loongson 3A2000/3A3000 processor.
28 * The MIPS port now supports the Loongson 3A1000 processor, aka Loongson3a,
29 which implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE
30 and Loongson-ext ASE instructions. Add -march=gs464 option for Loongson
31 3A1000 processor, The -march=loongson3a is an alias of -march=gs464 for
36 * Add support for disassembling netronome Flow Processor (NFP) firmware files.
38 * The AArch64 port now supports showing disassembly notes which are emitted
39 when inconsistencies are found with the instruction that may result in the
40 instruction being invalid. These can be turned on with the option -M notes
43 * The AArch64 port now emits warnings when a combination of an instruction and
44 a named register could be invalid.
46 * Added O modifier to ar to display member offsets inside an archive
50 * Add --debug-dump=links option to readelf and --dwarf=links option to objdump
51 which displays the contents of any .gnu_debuglink or .gnu_debugaltlink
54 Add a --debug-dump=follow-links option to readelf and a --dwarf=follow-links
55 option to objdump which causes indirect links into separate debug info files
56 to be followed when dumping other DWARF sections.
60 * The MIPS port now supports microMIPS eXtended Physical Addressing (XPA)
61 instructions for assembly and disassembly.
63 * The MIPS port now supports the microMIPS Release 5 ISA for assembly and
66 * The MIPS port now supports the Imagination interAptiv MR2 processor,
67 which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
68 of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
70 * The SPARC port now supports the SPARC M8 processor, which implements the
71 Oracle SPARC Architecture 2017.
73 * The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly.
75 * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
77 * Add support for the wasm32 ELF conversion of the WebAssembly file format.
79 * Add --inlines option to objdump, which extends the --line-numbers option
80 so that inlined functions will display their nesting information.
82 * Add --merge-notes options to objcopy to reduce the size of notes in
83 a binary file by merging and deleting redundant notes.
85 * Add support for locating separate debug info files using the build-id
86 method, where the separate file has a name based upon the build-id of
91 * This version of binutils fixes a problem with PowerPC VLE 16A and 16D
92 relocations which were functionally swapped, for example,
93 R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D
94 performed like R_PPC_VLE_HA16A. This could have been fixed by
95 renumbering relocations, which would keep object files created by an
96 older version of gas compatible with a newer ld. However, that would
97 require an ABI update, affecting other assemblers and linkers that
98 create and process the relocations correctly. It is recommended that
99 all VLE object files be recompiled, but ld can modify the relocations
100 if --vle-reloc-fixup is passed to ld. If the new ld command-line
101 option is not used, ld will ld warn on finding relocations inconsistent
102 with the instructions being relocated.
104 * The nm program has a new command-line option (--with-version-strings)
105 which will display a symbol's version information, if any, after the
108 * The ARC port of objdump now accepts a -M option to specify the extra
109 instruction class(es) that should be disassembled.
111 * The --remove-section option for objcopy and strip now accepts section
112 patterns starting with an exclamation point to indicate a non-matching
113 section. A non-matching section is removed from the set of sections
114 matched by an earlier --remove-section pattern.
116 * The --only-section option for objcopy now accepts section patterns
117 starting with an exclamation point to indicate a non-matching section.
118 A non-matching section is removed from the set of sections matched by
119 an earlier --only-section pattern.
121 * New --remove-relocations=SECTIONPATTERN option for objcopy and strip.
122 This option can be used to remove sections containing relocations.
123 The SECTIONPATTERN is the section to which the relocations apply, not
124 the relocation section itself.
128 * Add a configure option, --enable-64-bit-archive, to force use of a
129 64-bit format when creating an archive symbol index.
131 * Add --elf-stt-common= option to objcopy for ELF targets to control
132 whether to convert common symbols to the STT_COMMON type.
136 * Add option to objcopy to insert new symbols into a file:
137 --add-symbol <name>=[<section>:]<value>[,<flags>]
139 * Add support for the ARC EM/HS, and ARC600/700 architectures.
141 * Extend objcopy --compress-debug-sections option to support
142 --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF
145 * Add --update-section option to objcopy.
147 * Add --output-separator option to strings.
151 * Add --data option to strings to only print strings in loadable, initialized
152 data sections. Change the default behaviour to be --all, but add a new
153 configure time option of --disable-default-strings-all to restore the old
156 * Add --include-all-whitespace to strings.
158 * Add --dump-section option to objcopy.
160 * Add support for the Andes NDS32.
164 * Objcopy now supports wildcard characters in command-line options that take
167 * Add support for Altera Nios II.
171 * Add support for the VLE extension to the PowerPC architecture.
173 * Add support for x64 Windows target of the delayed-load-library.
175 * Add support for the Renesas RL78 architecture.
179 * Add support for displaying the contents of .debug.macro sections.
181 * Add --preprocessor-arg option to windres to specify additional options
182 passed to preprocessor.
184 * Add --dwarf-start and --dwarf-end to readelf and objdump. These are used by
185 the new Emacs mode, see dwarf-mode.el.
187 * Add support for the Tilera TILEPro and TILE-Gx architectures.
191 * Add --interleave-width option to objcopy to allowing copying a range of
192 bytes from the input to the output with the --interleave option.
194 * Add support for the TMS320C6000 (TI C6X) processor family.
196 * Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab) using
197 the -u / --unwind option.
199 * Add --dyn-syms to readelf to dump dynamic symbol table.
201 * A new tool - elfedit - has been added to directly manipulate ELF format
204 * Add to dlltool .def file feature of aliasing PE internal symbol name by
207 * Add a new command-line option -a / --addresses to addr2line to display the
208 address before function name or source filename.
210 * Add a new command-line option -p / --pretty-print to addr2line to have
211 a more human readable output.
213 * The hppa/som targets can now be compiled on any host.
217 * Add support for delay importing to dlltool. Use the --output-delaylib <file>
218 switch to create a delay-import library. The resulting app will load the dll
219 as soon as the first function is called. It will link to __delayLoadHelper2()
220 from the static delayimp library, which will import LoadLibraryA and
221 GetProcAddress from kernel32.
223 * Add a new command-line option, --insn-width=WIDTH, to objdump to specify
224 number of bytes to be displayed on a single line when disassembling
227 * Readelf can now display the relocated contents of a section as a sequence
228 of bytes via the --relocated-dump=<name|number> command-line option.
230 * The gprof program has been given a new command-line option:
231 --external-symbols-table=<filename> which reads in symbols from a specified
234 * The plugin target has been added to bfd. It can load the same shared objects
235 used by gold and uses them to provide basic support for new file formats.
237 * The verilog memory hex dump file format is now supported as an output format
240 * Add --file-alignment, --heap, --image-base, --section-alignment,
241 --stack and --subsystem command-line options to objcopy, which will
242 set PE optional header.
244 * Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w.
246 * --as-needed now links in a dynamic library if it satisfies undefined
247 symbols in regular objects, or in other dynamic libraries. In the
248 latter case the library is not linked if it is found in a DT_NEEDED
249 entry of one of the libraries already linked.
251 * Added --prefix=PREFIX and --prefix-strip=LEVEL switches to objdump to
252 add absolute paths for -S.
254 * Add new option --use-nul-prefixed-import-tables to dlltool to allow fall-
255 back to old import table generation with null element prefix.
257 * Added --identify-strict switch to cause --identify <implib> to
258 report an error when the import library is associated with
261 * Added --identify <implib> option to dlltool, which determines the
262 name of the DLL associated with the specified <implib>.
264 * Support for PowerPC booke64 instructions has been removed. The assembler no
265 longer accepts -mbooke32 or -mbooke64 and the disassembler no longer accepts
266 -Mbooke32 or -Mbooke64. Instead, -mbooke and -Mbooke should be used.
270 * Added -wL switch to dump decoded contents of .debug_line.
272 * Added support for "thin" archives which contain pathnames pointing to
273 object files rather than the files themselves and which contain a
274 flattened symbol index for all objects, and archives, which have been
275 added to the archive.
277 * Added -F switch to objdump to include file offsets in the disassembly.
279 * Added -c switch to readelf to allow string dumps of archive symbol index.
281 * Support for SSE5 has been added to the i386 port.
283 * Added -p switch to readelf to allow string dumps of sections.
287 * Resolved 37 coding problems in bfd including static array overruns, null
288 pointer dereferences and use of a malloc buffer after it has been freed, as
289 revealed by static analysis donated by Coverity, Inc. (http://scan.coverity.com).
291 * The binutils sources are now released under version 3 of the GNU General
294 * A new tool "windmc" has been added for some targets. This is a message
295 compiler which attempts to be compatible with the MS version.
297 * Add codepage support to the windres tool. It now supports many new
298 resource types (e.g. MANIFEST, TOOLBAR, etc). The output generation
299 for binary files is done now via bfd itself. The endianess problems
300 for different hosts are solved. Dumps of .res files can now be
301 re-compiled by windres without lossing resources or compilation errors.
302 Some problems on dialog resource translations are corrected.
304 * Add --extract-symbol command-line option to objcopy, which will
305 strip everything out of an ordinary object file or executable except
306 for its symbol table. Files containing just symbols can be useful
311 * Add "-x NAME" to readelf in addition to "-x NUMBER".
313 * Add -i and -t switches to cxxfilt. -i disables the display of implementation
314 specific extra demangling information (if any) and -t disables the demangling
317 * Add support for the "@<file>" syntax to the command lines of all tools, so
318 that extra switches can be read from <file>.
320 * Add "-W/--dwarf" to objdump to display the contents of the DWARF
323 * Add "-t/--section-details" to readelf to display section details.
324 "-N/--full-section-name" is deprecated.
326 * powerpc-linux ld now supports a variant form of PLT and GOT for the security
327 conscious. This form will automatically be chosen when ld detects that all
328 code in regular object files was generated by gcc -msecure-plt. The old PLT
329 and GOT may be forced by a new ld option, --bss-plt.
331 * Add "-i/--inlines" to addr2line to print enclosing scope information
332 for inlined function chains, back to first non-inlined function.
334 * Add "-N/--full-section-name" to readelf to display full section name.
336 * Add "-M entry:<addr>" switch to objdump to specify a function entry address
337 when disassembling VAX binaries.
339 * Add "--globalize-symbol <name>" and "--globalize-symbols <filename>" switches
340 to objcopy to convert local symbols into global symbols.
342 * gprof now allows input files to have histogram records for
343 several memory ranges, provided those ranges are disjoint.
347 * Add "-g/--section-groups" to readelf to display section groups.
349 * objcopy recognizes two new options --strip-unneeded-symbol and
350 --strip-unneeded-symbols, namely for use together with the wildcard
351 matching the original --strip-symbol/--strip-symbols provided, but
352 retaining any symbols matching but needed by relocations.
354 * readelf can now display address ranges from .debug_range sections. This
355 happens automatically when a DW_AT_range attribute is encountered. The
356 command-line switch --debug-dump=Ranges (or -wR) can also be used to display
357 the contents of the .debug_range section.
359 * nm and objdump now have a switch "--special-syms" to enable the displaying of
360 symbols which the target considers to be special. By default these symbols
361 are no longer displayed. Currently the only special symbols are the Mapping
362 symbols used by the ARM port to mark transitions between text and data and
363 between ARM and THUMB code.
365 * dlltool has a switch "--ext-prefix-alias <prefix>" to generate additional
366 import and export symbols with <preifx> prepended to them.
370 * objcopy for MIPS targets now accepts "-M no-aliases" as an option to the
371 disassembler to print the "raw" mips instruction mnemonic instead of some
372 pseudo instruction name. I.E. print "daddu" or "or" instead of "move",
373 "sll" instead of "nop", etc.
375 * objcopy and strip can now take wildcard patterns in symbol names specified on
376 the command line provided that the --wildcard switch is used to enable them.
378 * readelf can now parse archives.
380 * objdump now accepts --debugging-tags to print the debug information in a
381 format compatible with ctags tool.
383 * objcopy and strip now accept --only-keep-debug to create a file containing
384 those sections that would be stripped out by --strip-debug. The idea is that
385 this can be used in conjunction with the --add-gnu-debuglink switch to create
386 a two part program distribution - one a stripped executable and the other the
389 * objcopy now accepts --add-gnu-debuglink=<file> to insert a .gnu_debuglink
390 section into a (presumably stripped) executable. This allows the debug
391 information for the file to be held in a separate file.
393 * BFD marks the sections .comment and .note as 'n' in the BSD/POSIX
394 single-character representation. This can be checked by running nm
399 * Added --info switch to objcopy and strip.
401 * Support for Vitesse IQ2000 added by Red Hat.
403 * Added 'S' encoding to strings to allow the display of 8-bit characters.
405 * Added --prefix-symbols=<text>, --prefix-sections=<text> and
406 --prefix-alloc-sections=<text> to objcopy.
408 * readelf can handle the extensions to the DWARF2 spec used by the Unified
411 * BFD no longer declares a "boolean" type, to avoid clashes with other
412 headers that declare the same. Users of BFD should replace boolean,
413 false and true, with int, 0 and 1, or define their own boolean type.
415 * Support for IP2K added by Denis Chertykov.
419 * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400
422 Changes in version 2.12:
424 * Support for Don Knuth's MMIX, by Hans-Peter Nilsson.
426 * size: Add --totals to display summary of sizes (Berkeley format only).
428 * readelf: Add --wide option to not break section header or segment listing
429 lines to fit into 80 columns.
431 * strings: Add --encoding to display wide character strings. By Markus Kuhn.
433 * objcopy: Add --rename-section to change section names.
435 * readelf: Support added for DWARF 2.1 extensions. Support added for
436 displaying the contents of .debug.macinfo sections.
438 * New command-line switches added to objcopy to allow symbols to be kept as
439 global symbols, and also to specify files containing lists of such symbols.
442 * Support for OpenRISC by Johan Rydberg.
444 * New command-line switch to objcopy --alt-machine-code which creates a binary
445 with an alternate machine code if one is defined in the architecture
446 description. Only supported for ELF targets. By Alexandre Oliva.
448 * New command-line switch to objcopy -B (or --binary-architecture) which sets
449 the architecture of the output file to the given argument. This option only
450 makes sense, if the input target is binary. Otherwise it is ignored.
453 * Support for PDP-11 by Lars Brinkhoff.
455 Changes in binutils 2.11:
457 * Add support for ARM v5t and v5te architectures and Intel's XScale ARM
460 * Add --srec-len and --srec-forceS3 command-line switch to objcopy.
463 * Support for the MIPS32, by Anders Norlander.
465 * Support for the i860, by Jason Eckhardt.
467 * Support for CRIS (Axis Communications ETRAX series).
469 Changes in binutils 2.10:
471 * Support for 64-bit ELF on HPPA.
473 * New command-line switch to objdump --file-start-context which shows the
474 entire file contents up to the source line first encountered for a given
477 * New command-line switch to objdump -M (or --disassembler-options) which takes
478 a parameter which can then be interpreted on a per-target basis by the
479 disassembler. Used by ARM targets to select register name sets, ISA, APCS or
482 * objdump support for -mi386:intel which causes disassembly to be displayed
485 * New program: readelf. This displays the contents of ELF format files,
486 regardless of target machine.
488 * objcopy now takes --change-section-lma, --change-section-vma, and
489 --change-section-address options. The old --adjust-section-vma option is
490 equivalent to --change-section-address. The other --adjust-* options are now
491 renamed to --change-*, although --adjust-* continues to work.
493 * objcopy has a --redefine-sym option that lets you rename symbols.
495 * objcopy now takes a -j/--only-section option to copy only the specified
498 * dlltool now supports the IMPORTS command.
500 * dlltool now takes --export-all-symbols, --no-export-all-symbols,
501 --exclude-symbols, and --no-default-excludes options.
503 Changes in binutils 2.9:
505 * Added windres program, which can be used to manipulate resources in WIN32
506 files as used on Windows 95 and Windows NT.
508 * The objcopy --gap-fill and --pad-to options operate on the LMA rather than
509 the VMA of the sections.
511 * Added S modifier to ar to not build a symbol table.
513 Changes in binutils 2.8:
515 * The objdump disassembly format has been changed, and hopefully improved. Use
516 the new --prefix-addresses option to get the old format. There are also new
517 --disassemble-zeroes and --no-show-raw-insn options which affect disassembler
520 * Formats may now be specified as configuration triplets. For example,
521 objdump -b i386-pc-linux. The triplets are not passed through config.sub,
522 so they must be in canonical form.
524 * Added new addr2line program. This uses the debugging information to convert
525 an address into a file name and line number within a program.
527 * Added --change-leading-char argument to objcopy.
529 * Added --weaken argument to objcopy.
531 * objdump --dynamic-reloc now works on ELF executables and shared libraries.
533 * Added --adjust-vma option to objdump.
535 * Added -C/--demangle option to objdump.
537 * Added -p/--preserve-dates option to strip and objcopy.
539 Changes in binutils 2.7:
541 * Added --enable-shared and --enable-commonbfdlib options to configure.
543 * Added --debugging argument to objdump and objcopy.
545 * Added --defined-only argument to nm.
547 * Added --remove-leading-char argument to objcopy.
549 * The objdump --line-numbers option is now meaningful with --reloc.
551 * Added --line-numbers option to nm.
553 * Added --endian/-EB/-EL option to objdump.
555 * Added support for Alpha OpenVMS/AXP.
557 Changes in binutils 2.6:
559 * Added -N/--strip-symbol and -K/--keep-symbol arguments to strip and objcopy.
561 * Added several arguments to objcopy to provide some control over how the new
562 file is laid out in memory. Also added binary output format to BFD to permit
563 generating plain binary files.
565 * Added --start-address and --stop-address options to objdump.
567 * ar and ranlib now work on AIX. The tools are now built by default on AIX.
569 Changes in binutils 2.5:
571 * Changed objdump -dr to dump the relocs interspersed with the assembly
572 listing, for a more useful listing of relocatable files.
574 * Changed objdump -d/--disassemble to only disassemble SEC_CODE sections.
575 Added -D/--disassemble-all option to disassemble all sections.
577 * Added --size-sort option to nm.
579 * strip and objcopy should now be able to handle dynamically linked ELF
582 Changes in binutils 2.4:
584 * Support for HP-PA (by Jeff Law), i386 Mach (by David Mackenzie), RS/6000 and
585 PowerPC (except ar and ranlib; by Ian Taylor).
587 * Support for Irix 5.
589 * Programs `strip' and `objcopy' will not attempt to write dynamically linked
590 ELF output files, since BFD currently can't create them properly.
592 Changes in binutils 2.3:
594 * A new --stabs argument has been added to objdump to dump stabs sections in
597 * A new program, nlmconv, has been added. It can convert object files into
598 Novell NetWare Loadable Modules.
600 * The strings program has been added.
602 Changes in binutils 2.2:
604 * The 'copy' program has been renamed to 'objcopy', for consistency with
605 'objdump', and because 'copy' might more plausibly be used as a synonym for
608 * The new stand-alone program c++filt is a filter that converts encoded
609 (mangled) C++ assembly-level identifiers to user-level names. (Note: This
610 may get moved to the gcc distribution.)
612 * nm -o on an archive now prefixes each line with the archive name, matching
613 the output from BSD nm.
615 * ar (and ld) can now read (but not write) BSD4.4-style archives.
617 * New support for H8500, Z8000, and the Hitach SH.
619 * Dis-assembler interface changed to allow sharing with gdb.
621 * There is new Elf code, but it is not yet ready for general use.
623 * There is the beginnings of a test suite.
625 Changes in binutils 2.1:
627 * There is now support for writing ECOFF files, so ld and the other utilities
628 should work on Risc/Ultrix and Irix. Please let us know how well this works.
630 * ar now automatically creates a symbol table (a __.SYMDEF member, in the BSD
631 version), if there are any object files in the archive. So running ranlib is
632 now redundant (unless the non-standard q command is used). This is required
633 for Posix.2 conformance.
635 * The archive-reading code now reads both BSD-style and SYSV-style archives
636 independently of the selected target format. This is to encourage people to
637 switch to SYSV-format, which has a number of advantages.
639 * The strip and copy programs now have options to remove debug-symbols only
640 and/or local symbols only. They now also support long options.
643 Copyright (C) 2012-2019 Free Software Foundation, Inc.
645 Copying and distribution of this file, with or without modification,
646 are permitted in any medium without royalty provided the copyright
647 notice and this notice are preserved.