binutils/testsuite/ChangeLog

   1 2008-02-26  Joseph Myers  <joseph@codesourcery.com>
   2
   3         * config/default.exp (gcc_gas_flag, dlltool_gas_flag): Define to
   4         empty for testing an installed toolchain.
   5
   6 2008-02-04  Bob Wilson  <bob.wilson@acm.org>
   7
   8         * binutils-all/objdump.exp (cpus_expected): Add xtensa.
   9
  10 2007-10-26  Alan Modra  <amodra@bigpond.net.au>
  11
  12         * binutils-all/windres/windres.exp: Don't xfail.
  13
  14 2007-10-16  Nick Clifton  <nickc@redhat.com>
  15
  16         * binutils-all/readelf.ss: Accept COMMON in readelf's output.
  17         * binutils-all/readelf.ss-64: Likewise.
  18         * binutils-all/readelf.ss-mips: Likewise.
  19         * binutils-all/readelf.ss-tmips: Likewise.
  20
  21 2007-08-30  Nick Clifton  <nickc@redhat.com>
  22
  23         * binutils-all/dumptest.s: New test file.
  24         * binutils-all/readelf.exp: Add test of readelf's -p switch.
  25
  26 2007-08-28  Mark Shinwell  <shinwell@codesourcery.com>
  27             Joseph Myers  <joseph@codesourcery.com>
  28
  29         * binutils-all/ar.exp (long_filenames): Delete temporary files on
  30         the host.
  31         * binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if
  32         host is local.
  33         * binutils-all/objcopy.exp: Use ${srecfile} to get the name of the
  34         srec file to be passed to binutils_run.
  35         (objcopy_test_readelf): Use remote_exec.
  36         * binutils-all/readelf.exp (readelf_find_size): Use remote_exec.
  37         (readelf_test): Likewise.
  38         (readelf_wi_test): Likewise.
  39         * lib/utils-lib.exp (run_dump_test): Only check "which $binary" if
  40         host is local.  Use remote_exec.  Use $tempfile not
  41         tmpdir/bintest.o.
  42
  43 2007-08-09  Alan Modra  <amodra@bigpond.net.au>
  44
  45         * binutils-all/copy-2.d (not-target): Match *-*-*aout.
  46         * binutils-all/copy-3.d (not-target): Likewise.
  47         * binutils-all/objcopy.exp (objcopy_test): Remove extraneous
  48         setup_xfail.
  49         * windres/windres.exp: Return unsupported rather than fail if
  50         windows.h not found.
  51
  52 2007-07-05  Nick Clifton  <nickc@redhat.com>
  53
  54         * lib/utils-lib.exp: Update copyright notice to refer to GPLv3.
  55         * config/default.exp, binutils-all/ar.exp,
  56         binutils-all/dlltool.exp, binutils-all/nm.exp,
  57         binutils-all/objcopy.exp, binutils-all/arm/objdump.exp,
  58         binutils-all/hppa/objdump.exp, binutils-all/m68k/objdump.exp,
  59         binutils-all/vax/objdump.exp, binutils-all/windres/windres.exp,
  60         binutils-all/windres/msupdate: Likewise.
  61
  62 2007-06-23  H.J. Lu  <hongjiu.lu@intel.com>
  63
  64         * binutils-all/strip-3.d: Also strip .xtensa.info section.
  65
  66 2007-05-24  Kai Tietz  <Kai.Tietz@onevision.com>
  67
  68         * binutils-all/windres/version_cat.rc: New.
  69         * binutils-all/windres/version_cat.rsd: New.
  70
  71 2007-05-23  Kai Tietz  <Kai.Tietz@onevision.com>
  72
  73         * binutils-all/windres/html.rc: New.
  74         * binutils-all/windres/html.rsd: New.
  75         * binutils-all/windres/html1.hm: New.
  76         * binutils-all/windres/html2.hm: New.
  77         * binutils-all/windres/messagetable.rc: New.
  78         * binutils-all/windres/messagetable.rsd: New.
  79         * binutils-all/windres/MSG00001.bin: New.
  80         * binutils-all/windres/strtab2.rc: New.
  81         * binutils-all/windres/strtab2.rsd: New.
  82         * binutils-all/windres/version.rc: New.
  83         * binutils-all/windres/version.rsd: New.
  84         * binutils-all/windres/dialog.rsd: Fix expected results.
  85
  86 2007-05-17  Joseph Myers  <joseph@codesourcery.com>
  87
  88         * binutils-all/strip-3.d: Strip .pdr section.
  89
  90 2007-05-15  Alan Modra  <amodra@bigpond.net.au>
  91
  92         * binutils-all/objcopy.exp: Only run needed-by-reloc test for ELF.
  93
  94 2007-05-11  Alan Modra  <amodra@bigpond.net.au>
  95
  96         * binutils-all/needed-by-reloc.s: Use .long rather than .4byte.
  97
  98 2007-05-08  Mark Shinwell  <shinwell@codesourcery.com>
  99
 100         * binutils-all/strip-3.d: Strip .ARM.attributes and .reginfo
 101         sections.
 102
 103 2007-05-02  Alan Modra  <amodra@bigpond.net.au>
 104
 105         * binutils-all/objcopy.exp (copy_setup): Don't perror, use send_log.
 106         (copy_executable): Return early if test2 is blank.
 107         Return unsupported rather than unresolved if we can't run
 108         executables.  Do test1 if we can compile.
 109
 110 2007-04-24  Nathan Froyd  <froydnj@codesourcery.com>
 111             Phil Edwards  <phil@codesourcery.com>
 112
 113         * binutils-all/objcopy.exp: Add test for stripping a symbol
 114         used in a relocation.
 115         * binutils-all/needed-by-reloc.s: New file.
 116
 117 2007-04-20  Nathan Froyd  <froydnj@codesourcery.com>
 118             Phil Edwards  <phil@codesourcery.com>
 119             Thomas de Lellis <tdel@windriver.com>
 120
 121         * binutils-all/objcopy.exp: Add test for --reverse-bytes.
 122
 123 2007-04-21  Richard Earnshaw  <rearnsha@arm.com>
 124
 125         * binutils-all/readelf.exp (regexp_diff): Delete.
 126
 127 2007-04-20  Richard Earnshaw  <rearnsha@arm.com>
 128
 129         * binutils-all/arm/thumb2-cond.s: Allow for tab expansion by the pty.
 130         Rename the second test.
 131
 132 2007-04-12  H.J. Lu  <hongjiu.lu@intel.com>
 133
 134         PR binutils/4348
 135         * binutils-all/empty.s: New file.
 136         * binutils-all/strip-3.d: Likewise.
 137
 138         * binutils-all/objcopy.exp: Run strip-3 for ELF target.
 139
 140 2007-02-27  Nathan Sidwell  <nathan@codesourcery.com>
 141
 142         * binutils-all/objcopy.exp: Skip for uclinux targets.
 143
 144 2007-02-14  Nick Clifton  <nickc@redhat.com>
 145
 146         * binutils-all/readelf.exp (readelf_wi_test): Fix unexpected
 147         output failure message.
 148
 149 2007-01-08  Kai Tietz   <kai.tietz@onevision.com>
 150
 151         * copy-3.d: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
 152         * dlltool.exp: Dito
 153         * lang.rc: Dito
 154         * strtab1.rc: Dito
 155         * windres.exp: Dito
 156
 157 2006-09-20  Kai Tietz  <Kai.Tietz@onevision.com>
 158
 159         * binutils-all/copy-3.d: Add support for target x86_64-pc-mingw64.
 160         * binutils-all/dlltool.exp: Likewise.
 161         * binutils-all/objcopy.exp: Likewise.
 162         * binutils-all/windres/windres.exp: Likewise.
 163         * binutils-all/windres/lang.rc: xfail it as long as there is no windows.h.
 164         * binutils-all/windres/strtab1.rc: Likewise.
 165         * lib/utils-lib.exp: Adjust executable prefix detection (as .exe).
 166
 167 2006-09-14  H.J. Lu  <hongjiu.lu@intel.com>
 168
 169         PR binutils/3181
 170         * binutils-all/objcopy.exp: Run strip-1 and strip-2 for ELF
 171         targets.
 172
 173         * binutils-all/strip-1.d: New file.
 174         * binutils-all/strip-2.d: Likewise.
 175
 176         * lib/utils-lib.exp (run_dump_test): Support strip.
 177
 178 2006-08-15  Thiemo Seufer  <ths@mips.com>
 179             Nigel Stephens  <nigel@mips.com>
 180             David Ung  <davidu@mips.com>
 181
 182         * binutils-all/readelf.exp (readelf_test): Handle mips*-sde-elf*.
 183
 184 2006-06-24  Richard Sandiford  <richard@codesourcery.com>
 185
 186         * binutils-all/localize-hidden-1.d: Use objdump --syms instead
 187         of readelf.
 188
 189 2006-06-23  Richard Sandiford  <richard@codesourcery.com>
 190
 191         * binutils-all/localize-hidden-1.s,
 192         * binutils-all/localize-hidden-1.d,
 193         * binutils-all/localize-hidden-2.s,
 194         * binutils-all/localize-hidden-2.d: New tests.
 195         * binutils-all/objcopy.exp: Run them.
 196
 197 2006-06-06  Paul Brook  <paul@codesourcery.com>
 198
 199         * binutils-all/arm/objdump.exp: New file.
 200         * binutils-all/arm/thumb2-cond.s: New test.
 201
 202 2006-05-03  H.J. Lu  <hongjiu.lu@intel.com>
 203
 204         * binutils-all/copy-3.d: Fix a typo.
 205
 206 2006-05-03  H.J. Lu  <hongjiu.lu@intel.com>
 207
 208         * binutils-all/copy-3.d: New.
 209
 210         * objcopy.exp: Run copy-3.
 211
 212 2006-05-02  Dave Korn  <dave.korn@artimi.com>
 213
 214         * binutils-all/copy-1.d (name):  Correct spelling of 'setting'.
 215         * binutils-all/copy-1.d (name):  Likewise.
 216
 217 2006-05-02  Nick Clifton  <nickc@redhat.com>
 218
 219         * binutils-all/copy-2.d: Change the name of the section whose
 220         flags are changed to "foo" so that the test will work with PE
 221         based targets.  Skip this test for AOUT based targeted.
 222         * binutils-all/copytest.s: New file.
 223
 224 2006-05-01  H.J. Lu  <hongjiu.lu@intel.com>
 225
 226         * binutils-all/objcopy.exp: Run "copy-1" for ELF only.
 227
 228 2006-05-01  Ben Elliston  <bje@au.ibm.com>
 229
 230         * binutils-all/objcopy.exp (objcopy_test_readelf): Remove stray ;
 231
 232 2006-04-26  H.J. Lu  <hongjiu.lu@intel.com>
 233
 234         PR binutils/2593
 235         * binutils-all/copy-1.d: New file.
 236         * binutils-all/copy-1.s: Likewise.
 237         * binutils-all/copy-2.d: Likewise.
 238
 239         * binutils-all/objcopy.exp: Add run_dump_test "copy-1" and
 240         run_dump_test "copy-2".
 241
 242         * lib/utils-lib.exp (run_dump_test): New.
 243         (slurp_options): Likewise.
 244         (regexp_diff): Likewise.
 245         (file_contents): Likewise.
 246         (verbose_eval): Likewise.
 247
 248 2006-04-25  H.J. Lu  <hongjiu.lu@intel.com>
 249
 250         PR binutils/2467
 251         * binutils-all/objcopy.exp (strip_test): Also test "strip -g"
 252         on archive.
 253
 254 2006-04-10  H.J. Lu  <hongjiu.lu@intel.com>
 255
 256         * lib/utils-lib.exp (default_binutils_run): Check exit status.
 257
 258 2005-12-24  Ben Elliston  <bje@gnu.org>
 259
 260         * config/default.exp: Do not load the unneeded util-defs.exp.
 261
 262 2005-11-15  Jan Beulich  <jbeulich@novell.com>
 263
 264         * config/default.exp (link_or_copy): New. Use it for setting
 265         up assembler and linker for the compiler to use.
 266
 267 2005-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 268
 269         PR ld/251
 270         * binutils-all/group.s: New file.
 271
 272         * binutils-all/objcopy.exp (objcopy_test_readelf): New
 273         procedure.
 274         Use it to test ELF group.
 275
 276 2005-10-19  H.J. Lu  <hongjiu.lu@intel.com>
 277
 278         PR ld/1487
 279         * binutils-all/objcopy.exp (objcopy_test): New procedure.
 280         Use it to test simple copy, ia64 link order and ELF unknown
 281         section type.
 282
 283         * binutils-all/unknown.s: New file.
 284
 285 2005-10-19  H.J. Lu  <hongjiu.lu@intel.com>
 286
 287         PR binutils/1321
 288         * binutils-all/link-order.s: New.
 289
 290         * binutils-all/objcopy.exp: Check ia64 link order.
 291
 292 2005-10-11  Danny Smith  <dannysmith@users.sourceforge.net>
 293
 294         * binutils-all/windres/escapex-2.rc: New file.
 295         * binutils-all/windres/escapex-2.rsd: Generate.
 296
 297 2005-08-26  Christian Groessler  <chris@groessler.org>
 298
 299         * binutils-all/objcopy.exp: Don't setup_xfail "z8*-*".
 300
 301 2005-08-18  Alan Modra  <amodra@bigpond.net.au>
 302
 303         * binutils-all/objcopy.exp: Remove a29k support.
 304         * binutils-all/objdump.exp: Likewise, alliant and convex too.
 305
 306 2005-05-07  Nick Clifton  <nickc@redhat.com>
 307
 308         * Update the address and phone number of the FSF organization in
 309         the GPL notices in the following files:
 310         binutils-all/ar.exp, binutils-all/dlltool.exp,
 311         binutils-all/nm.exp, binutils-all/objcopy.exp,
 312         binutils-all/objdump.exp, binutils-all/readelf.exp,
 313         binutils-all/size.exp, binutils-all/hppa/objdump.exp,
 314         binutils-all/m68k/objdump.exp, binutils-all/vax/objdump.exp,
 315         binutils-all/windres/msupdate, binutils-all/windres/windres.exp,
 316         config/default.exp, lib/utils-lib.exp
 317
 318 2005-04-04  Jan-Benedict Glaw  <jbglaw@lug-owl.>
 319
 320         * binutils-all/vax/objdump.exp: Condense the two tests into one
 321         and add a "-M entry:" for the second label.
 322
 323 2005-03-29  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
 324
 325         * binutils-all/vax: New directory.
 326         * binutils-all/vax/objdump.exp: New script.  Test the -Mentry:
 327         switch added to the VAX disassembler.
 328         * binutils-all/vax/entrymask.s: New assembler source file.
 329
 330 2005-03-08  Ben Elliston  <bje@au.ibm.com>
 331
 332        * config/default.exp: Remove send_user call for stray output.
 333
 334 2005-01-04  Martin Koegler  <mkoegler@auto.tuwien.ac.at>
 335
 336         * binutils-all/testprog.c: Add prototype for printf() and make
 337         type of "string" array be "char" in order to avoid compile time
 338         warnings.
 339
 340 2004-12-31  Alan Modra  <amodra@bigpond.net.au>
 341
 342         * binutils-all/readelf.ss: Allow for both .rel and .rela sections.
 343
 344 2004-11-04  Hans-Peter Nilsson  <hp@axis.com>
 345
 346         * binutils-all/objdump.exp (cpus_expected): Append cris.
 347
 348 2004-10-28  H.J. Lu  <hongjiu.lu@intel.com>
 349
 350         * binutils-all/dlltool.exp: Set XFAIL if $target_xfail is yes.
 351
 352 2004-10-23  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>
 353
 354         * binutils-all/alias.def: New file.
 355         * binutils-all/dlltool.exp: Two new -p tests.
 356         * config/default.exp (dlltool_gas_flag): New variable.
 357         Copy gas and lds executables into tmpdir/gas directory rather than
 358         making symlinks which might not be supported by the host OS.
 359         Attempt to handle the case where the host OS does not use the .exe
 360         extension but the target OS does.
 361         * lib/utils-lib.exp (exe_ext): New procedure.
 362
 363 2004-07-12  Nick Clifton  <nickc@redhat.com>
 364
 365         * binutils-all/dlltool.exp: Check that the -p switch is not
 366         rejected.
 367
 368 2004-07-09  Andreas Schwab  <schwab@suse.de>
 369
 370         * binutils-all/m68k/movem.s: New file.
 371
 372         * binutils-all/m68k/objdump.exp: New file.
 373
 374 2004-05-15  Nick Clifton  <nickc@redhat.com>
 375
 376         * binutils-all/readelf.ss: Allow for ARM mapping symbols.
 377
 378 2004-05-12  Ben Elliston  <bje@au.ibm.com>
 379
 380         * binutils-all/ar.exp: Remove stray semicolons.
 381         * binutils-all/dlltool.exp: Likewise.
 382         * binutils-all/objcopy.exp: Likewise.
 383         * binutils-all/readelf.exp: Likewise.
 384         * binutils-all/windres/windres.exp: Likewise.
 385         * lib/utils-lib.exp: Likewise.
 386
 387 2004-04-14  Richard Sandiford  <rsandifo@redhat.com>
 388
 389         * binutils-all/readelf.ss-mips: Allow named section symbols.
 390
 391 2004-03-30  Jakub Jelinek  <jakub@redhat.com>
 392
 393         * binutils-all/objcopy.exp: Accept main as a data symbol as well.
 394
 395 2004-02-27  Andreas Schwab  <schwab@suse.de>
 396
 397         * binutils-all/ar.exp (argument_parsing): New test.
 398
 399 2004-02-20  Nathan Sidwell  <nathan@codesourcery.com>
 400
 401         * binutils-all/objcopy.exp: Reorder arguments for POSIXLY_CORRECT
 402         systems.
 403
 404 For older changes see ChangeLog-9303
 405 \f
 406 Local Variables:
 407 mode: change-log
 408 left-margin: 8
 409 fill-column: 74
 410 version-control: never
 411 End: