* objcopy.c (filter_symbols): Explicitly stripping a symbol used in relocations is...
[deliverable/binutils-gdb.git] / binutils / testsuite / ChangeLog
1 2007-04-24 Nathan Froyd <froydnj@codesourcery.com>
2 Phil Edwards <phil@codesourcery.com>
3
4 * binutils-all/objcopy.exp: Add test for stripping a symbol
5 used in a relocation.
6 * binutils-all/needed-by-reloc.s: New file.
7
8 2007-04-20 Nathan Froyd <froydnj@codesourcery.com>
9 Phil Edwards <phil@codesourcery.com>
10 Thomas de Lellis <tdel@windriver.com>
11
12 * binutils-all/objcopy.exp: Add test for --reverse-bytes.
13
14 2007-04-21 Richard Earnshaw <rearnsha@arm.com>
15
16 * binutils-all/readelf.exp (regexp_diff): Delete.
17
18 2007-04-20 Richard Earnshaw <rearnsha@arm.com>
19
20 * binutils-all/arm/thumb2-cond.s: Allow for tab expansion by the pty.
21 Rename the second test.
22
23 2007-04-12 H.J. Lu <hongjiu.lu@intel.com>
24
25 PR binutils/4348
26 * binutils-all/empty.s: New file.
27 * binutils-all/strip-3.d: Likewise.
28
29 * binutils-all/objcopy.exp: Run strip-3 for ELF target.
30
31 2007-02-27 Nathan Sidwell <nathan@codesourcery.com>
32
33 * binutils-all/objcopy.exp: Skip for uclinux targets.
34
35 2007-02-14 Nick Clifton <nickc@redhat.com>
36
37 * binutils-all/readelf.exp (readelf_wi_test): Fix unexpected
38 output failure message.
39
40 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
41
42 * copy-3.d: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
43 * dlltool.exp: Dito
44 * lang.rc: Dito
45 * strtab1.rc: Dito
46 * windres.exp: Dito
47
48 2006-09-20 Kai Tietz <Kai.Tietz@onevision.com>
49
50 * binutils-all/copy-3.d: Add support for target x86_64-pc-mingw64.
51 * binutils-all/dlltool.exp: Likewise.
52 * binutils-all/objcopy.exp: Likewise.
53 * binutils-all/windres/windres.exp: Likewise.
54 * binutils-all/windres/lang.rc: xfail it as long as there is no windows.h.
55 * binutils-all/windres/strtab1.rc: Likewise.
56 * lib/utils-lib.exp: Adjust executable prefix detection (as .exe).
57
58 2006-09-14 H.J. Lu <hongjiu.lu@intel.com>
59
60 PR binutils/3181
61 * binutils-all/objcopy.exp: Run strip-1 and strip-2 for ELF
62 targets.
63
64 * binutils-all/strip-1.d: New file.
65 * binutils-all/strip-2.d: Likewise.
66
67 * lib/utils-lib.exp (run_dump_test): Support strip.
68
69 2006-08-15 Thiemo Seufer <ths@mips.com>
70 Nigel Stephens <nigel@mips.com>
71 David Ung <davidu@mips.com>
72
73 * binutils-all/readelf.exp (readelf_test): Handle mips*-sde-elf*.
74
75 2006-06-24 Richard Sandiford <richard@codesourcery.com>
76
77 * binutils-all/localize-hidden-1.d: Use objdump --syms instead
78 of readelf.
79
80 2006-06-23 Richard Sandiford <richard@codesourcery.com>
81
82 * binutils-all/localize-hidden-1.s,
83 * binutils-all/localize-hidden-1.d,
84 * binutils-all/localize-hidden-2.s,
85 * binutils-all/localize-hidden-2.d: New tests.
86 * binutils-all/objcopy.exp: Run them.
87
88 2006-06-06 Paul Brook <paul@codesourcery.com>
89
90 * binutils-all/arm/objdump.exp: New file.
91 * binutils-all/arm/thumb2-cond.s: New test.
92
93 2006-05-03 H.J. Lu <hongjiu.lu@intel.com>
94
95 * binutils-all/copy-3.d: Fix a typo.
96
97 2006-05-03 H.J. Lu <hongjiu.lu@intel.com>
98
99 * binutils-all/copy-3.d: New.
100
101 * objcopy.exp: Run copy-3.
102
103 2006-05-02 Dave Korn <dave.korn@artimi.com>
104
105 * binutils-all/copy-1.d (name): Correct spelling of 'setting'.
106 * binutils-all/copy-1.d (name): Likewise.
107
108 2006-05-02 Nick Clifton <nickc@redhat.com>
109
110 * binutils-all/copy-2.d: Change the name of the section whose
111 flags are changed to "foo" so that the test will work with PE
112 based targets. Skip this test for AOUT based targeted.
113 * binutils-all/copytest.s: New file.
114
115 2006-05-01 H.J. Lu <hongjiu.lu@intel.com>
116
117 * binutils-all/objcopy.exp: Run "copy-1" for ELF only.
118
119 2006-05-01 Ben Elliston <bje@au.ibm.com>
120
121 * binutils-all/objcopy.exp (objcopy_test_readelf): Remove stray ;
122
123 2006-04-26 H.J. Lu <hongjiu.lu@intel.com>
124
125 PR binutils/2593
126 * binutils-all/copy-1.d: New file.
127 * binutils-all/copy-1.s: Likewise.
128 * binutils-all/copy-2.d: Likewise.
129
130 * binutils-all/objcopy.exp: Add run_dump_test "copy-1" and
131 run_dump_test "copy-2".
132
133 * lib/utils-lib.exp (run_dump_test): New.
134 (slurp_options): Likewise.
135 (regexp_diff): Likewise.
136 (file_contents): Likewise.
137 (verbose_eval): Likewise.
138
139 2006-04-25 H.J. Lu <hongjiu.lu@intel.com>
140
141 PR binutils/2467
142 * binutils-all/objcopy.exp (strip_test): Also test "strip -g"
143 on archive.
144
145 2006-04-10 H.J. Lu <hongjiu.lu@intel.com>
146
147 * lib/utils-lib.exp (default_binutils_run): Check exit status.
148
149 2005-12-24 Ben Elliston <bje@gnu.org>
150
151 * config/default.exp: Do not load the unneeded util-defs.exp.
152
153 2005-11-15 Jan Beulich <jbeulich@novell.com>
154
155 * config/default.exp (link_or_copy): New. Use it for setting
156 up assembler and linker for the compiler to use.
157
158 2005-10-20 H.J. Lu <hongjiu.lu@intel.com>
159
160 PR ld/251
161 * binutils-all/group.s: New file.
162
163 * binutils-all/objcopy.exp (objcopy_test_readelf): New
164 procedure.
165 Use it to test ELF group.
166
167 2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
168
169 PR ld/1487
170 * binutils-all/objcopy.exp (objcopy_test): New procedure.
171 Use it to test simple copy, ia64 link order and ELF unknown
172 section type.
173
174 * binutils-all/unknown.s: New file.
175
176 2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
177
178 PR binutils/1321
179 * binutils-all/link-order.s: New.
180
181 * binutils-all/objcopy.exp: Check ia64 link order.
182
183 2005-10-11 Danny Smith <dannysmith@users.sourceforge.net>
184
185 * binutils-all/windres/escapex-2.rc: New file.
186 * binutils-all/windres/escapex-2.rsd: Generate.
187
188 2005-08-26 Christian Groessler <chris@groessler.org>
189
190 * binutils-all/objcopy.exp: Don't setup_xfail "z8*-*".
191
192 2005-08-18 Alan Modra <amodra@bigpond.net.au>
193
194 * binutils-all/objcopy.exp: Remove a29k support.
195 * binutils-all/objdump.exp: Likewise, alliant and convex too.
196
197 2005-05-07 Nick Clifton <nickc@redhat.com>
198
199 * Update the address and phone number of the FSF organization in
200 the GPL notices in the following files:
201 binutils-all/ar.exp, binutils-all/dlltool.exp,
202 binutils-all/nm.exp, binutils-all/objcopy.exp,
203 binutils-all/objdump.exp, binutils-all/readelf.exp,
204 binutils-all/size.exp, binutils-all/hppa/objdump.exp,
205 binutils-all/m68k/objdump.exp, binutils-all/vax/objdump.exp,
206 binutils-all/windres/msupdate, binutils-all/windres/windres.exp,
207 config/default.exp, lib/utils-lib.exp
208
209 2005-04-04 Jan-Benedict Glaw <jbglaw@lug-owl.>
210
211 * binutils-all/vax/objdump.exp: Condense the two tests into one
212 and add a "-M entry:" for the second label.
213
214 2005-03-29 Jan-Benedict Glaw <jbglaw@lug-owl.de>
215
216 * binutils-all/vax: New directory.
217 * binutils-all/vax/objdump.exp: New script. Test the -Mentry:
218 switch added to the VAX disassembler.
219 * binutils-all/vax/entrymask.s: New assembler source file.
220
221 2005-03-08 Ben Elliston <bje@au.ibm.com>
222
223 * config/default.exp: Remove send_user call for stray output.
224
225 2005-01-04 Martin Koegler <mkoegler@auto.tuwien.ac.at>
226
227 * binutils-all/testprog.c: Add prototype for printf() and make
228 type of "string" array be "char" in order to avoid compile time
229 warnings.
230
231 2004-12-31 Alan Modra <amodra@bigpond.net.au>
232
233 * binutils-all/readelf.ss: Allow for both .rel and .rela sections.
234
235 2004-11-04 Hans-Peter Nilsson <hp@axis.com>
236
237 * binutils-all/objdump.exp (cpus_expected): Append cris.
238
239 2004-10-28 H.J. Lu <hongjiu.lu@intel.com>
240
241 * binutils-all/dlltool.exp: Set XFAIL if $target_xfail is yes.
242
243 2004-10-23 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
244
245 * binutils-all/alias.def: New file.
246 * binutils-all/dlltool.exp: Two new -p tests.
247 * config/default.exp (dlltool_gas_flag): New variable.
248 Copy gas and lds executables into tmpdir/gas directory rather than
249 making symlinks which might not be supported by the host OS.
250 Attempt to handle the case where the host OS does not use the .exe
251 extension but the target OS does.
252 * lib/utils-lib.exp (exe_ext): New procedure.
253
254 2004-07-12 Nick Clifton <nickc@redhat.com>
255
256 * binutils-all/dlltool.exp: Check that the -p switch is not
257 rejected.
258
259 2004-07-09 Andreas Schwab <schwab@suse.de>
260
261 * binutils-all/m68k/movem.s: New file.
262
263 * binutils-all/m68k/objdump.exp: New file.
264
265 2004-05-15 Nick Clifton <nickc@redhat.com>
266
267 * binutils-all/readelf.ss: Allow for ARM mapping symbols.
268
269 2004-05-12 Ben Elliston <bje@au.ibm.com>
270
271 * binutils-all/ar.exp: Remove stray semicolons.
272 * binutils-all/dlltool.exp: Likewise.
273 * binutils-all/objcopy.exp: Likewise.
274 * binutils-all/readelf.exp: Likewise.
275 * binutils-all/windres/windres.exp: Likewise.
276 * lib/utils-lib.exp: Likewise.
277
278 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
279
280 * binutils-all/readelf.ss-mips: Allow named section symbols.
281
282 2004-03-30 Jakub Jelinek <jakub@redhat.com>
283
284 * binutils-all/objcopy.exp: Accept main as a data symbol as well.
285
286 2004-02-27 Andreas Schwab <schwab@suse.de>
287
288 * binutils-all/ar.exp (argument_parsing): New test.
289
290 2004-02-20 Nathan Sidwell <nathan@codesourcery.com>
291
292 * binutils-all/objcopy.exp: Reorder arguments for POSIXLY_CORRECT
293 systems.
294
295 For older changes see ChangeLog-9303
296 \f
297 Local Variables:
298 mode: change-log
299 left-margin: 8
300 fill-column: 74
301 version-control: never
302 End:
This page took 0.042975 seconds and 5 git commands to generate.