1 # Copyright 1993, 1994, 1995, 1996, 1997, 2000, 2001, 2003, 2004, 2006, 2007,
2 # 2009 Free Software Foundation, Inc.
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License
15 # along with this program; if not, write to the Free Software
16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
18 # Please email any bugs, comments, and/or additions to this file to:
19 # bug-dejagnu@prep.ai.mit.edu
21 # This file was written by Rob Savoye <rob@cygnus.com>
22 # and extended by Ian Lance Taylor <ian@cygnus.com>
24 proc binutil_version { prog } {
25 if ![is_remote host] {
26 set path [which $prog]
27 if {$path == 0} then {
28 perror "$prog can't be run, file not found."
34 set state [remote_exec host $prog --version]
35 set tmp "[lindex $state 1]\n"
36 # Should find a way to discard constant parts, keep whatever's
37 # left, so the version string could be almost anything at all...
38 regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" "$tmp" version cyg number
39 if ![info exists number] then {
40 return "$path (no version number)\n"
42 return "$path $number\n"
46 # default_binutils_run
47 # run a program, returning the output
48 # sets binutils_run_failed if the program does not exist
50 proc default_binutils_run { prog progargs } {
51 global binutils_run_failed
54 set binutils_run_failed 0
56 if ![is_remote host] {
57 if {[which $prog] == 0} then {
58 perror "$prog does not exist"
59 set binutils_run_failed 1
64 send_log "$prog $progargs\n"
65 verbose "$prog $progargs"
67 # Gotta quote dollar-signs because they get mangled by the
69 regsub -all "\\$" "$progargs" "\\$" progargs
71 set state [remote_exec host $prog $progargs]
72 set exec_output [prune_warnings [lindex $state 1]]
73 if {![string match "" $exec_output]} then {
74 send_log "$exec_output\n"
75 verbose "$exec_output"
77 if { [lindex $state 0] != 0 } {
78 set exec_output "$prog exited with status [lindex $state 0]"
79 send_log "$exec_output\n"
80 verbose "$exec_output"
87 # default_binutils_assemble
90 proc default_binutils_assemble { source object } {
94 # The HPPA assembler syntax is a little different than most, to make
95 # the test source file assemble we need to run it through sed.
97 # This is a hack in that it won't scale well if other targets need
98 # similar transformations to assemble. We'll generalize the hack
99 # if/when other targets need similar handling.
100 if { [istarget "hppa*-*-*"] && ![istarget "*-*-linux*" ] } then {
101 set sed_file $srcdir/config/hppa.sed
102 send_log "sed -f $sed_file < $source > asm.s\n"
103 verbose "sed -f $sed_file < $source > asm.s"
104 catch "exec sed -f $sed_file < $source > asm.s"
108 set exec_output [target_assemble $source $object ""]
109 set exec_output [prune_warnings $exec_output]
111 if [string match "" $exec_output] {
114 send_log "$exec_output\n"
115 verbose "$exec_output"
116 perror "$source: assembly failed"
123 # true if the object format is known to be ELF
125 proc is_elf_format {} {
126 if { ![istarget *-*-sysv4*] \
127 && ![istarget *-*-unixware*] \
128 && ![istarget *-*-elf*] \
129 && ![istarget *-*-eabi*] \
130 && ![istarget hppa*64*-*-hpux*] \
131 && ![istarget ia64-*-hpux*] \
132 && ![istarget *-*-linux*] \
133 && ![istarget *-*-irix5*] \
134 && ![istarget *-*-irix6*] \
135 && ![istarget *-*-netbsd*] \
136 && ![istarget *-*-solaris2*] } {
140 if { [istarget *-*-linux*aout*] \
141 || [istarget *-*-linux*oldld*] } {
145 if { ![istarget *-*-netbsdelf*] \
146 && ([istarget *-*-netbsd*aout*] \
147 || [istarget *-*-netbsdpe*] \
148 || [istarget arm*-*-netbsd*] \
149 || [istarget sparc-*-netbsd*] \
150 || [istarget i*86-*-netbsd*] \
151 || [istarget m68*-*-netbsd*] \
152 || [istarget vax-*-netbsd*] \
153 || [istarget ns32k-*-netbsd*]) } {
161 # Returns target executable extension, if any.
164 if { [istarget *-*-mingw*] || [istarget *-*-cygwin*] } {
171 # Copied and modified from gas.
173 # run_dump_test FILE (optional:) EXTRA_OPTIONS
175 # Assemble a .s file, then run some utility on it and check the output.
177 # There should be an assembly language file named FILE.s in the test
178 # suite directory, and a pattern file called FILE.d. `run_dump_test'
179 # will assemble FILE.s, run some tool like `objdump', `objcopy', or
180 # `nm' on the .o file to produce textual output, and then analyze that
181 # with regexps. The FILE.d file specifies what program to run, and
182 # what to expect in its output.
184 # The FILE.d file begins with zero or more option lines, which specify
185 # flags to pass to the assembler, the program to run to dump the
186 # assembler's output, and the options it wants. The option lines have
191 # OPTION is the name of some option, like "name" or "objdump", and
192 # VALUE is OPTION's value. The valid options are described below.
193 # Whitespace is ignored everywhere, except within VALUE. The option
194 # list ends with the first line that doesn't match the above syntax.
195 # However, a line within the options that begins with a #, but doesn't
196 # have a recognizable option name followed by a colon, is considered a
197 # comment and entirely ignored.
199 # The optional EXTRA_OPTIONS argument to `run_dump_test' is a list of
200 # two-element lists. The first element of each is an option name, and
201 # the second additional arguments to be added on to the end of the
202 # option list as given in FILE.d. (If omitted, no additional options
205 # The interesting options are:
208 # The name of this test, passed to DejaGNU's `pass' and `fail'
209 # commands. If omitted, this defaults to FILE, the root of the
210 # .s and .d files' names.
213 # When assembling FILE.s, pass FLAGS to the assembler.
216 # The name of the program to run to analyze the .o file produced
217 # by the assembler. This can be omitted; run_dump_test will guess
218 # which program to run by seeing which of the flags options below
224 # Use the specified program to analyze the .o file, and pass it
225 # FLAGS, in addition to the .o file name. Note that they are run
226 # with LC_ALL=C in the environment to give consistent sorting
230 # Assemble the file SOURCE.s. If omitted, this defaults to FILE.s.
231 # This is useful if several .d files want to share a .s file.
234 # Run this test only on a specified list of targets. More precisely,
235 # each glob in the space-separated list is passed to "istarget"; if
236 # it evaluates true for any of them, the test will be run, otherwise
237 # it will be marked unsupported.
239 # not-target: GLOBS...
240 # Do not run this test on a specified list of targets. Again,
241 # the each glob in the space-separated list is passed to
242 # "istarget", and the test is run if it evaluates *false* for
243 # *all* of them. Otherwise it will be marked unsupported.
247 # These are exactly the same as "not-target" and "target",
248 # respectively, except that they do nothing at all if the check
249 # fails. They should only be used in groups, to construct a single
250 # test which is run on all targets but with variant options or
251 # expected output on some targets. (For example, see
252 # gas/arm/inst.d and gas/arm/wince_inst.d.)
255 # An error with message matching REGEX must be emitted for the test
256 # to pass. The PROG, objdump, nm and objcopy options have no
257 # meaning and need not supplied if this is present.
260 # Expect a gas warning matching REGEX. It is an error to issue
261 # both "error" and "warning".
264 # FILE contains regexp lines to be matched against the diagnostic
265 # output of the assembler. This does not preclude the use of
266 # PROG, nm, objdump, or objcopy.
269 # Means the same as 'stderr', but also indicates that the assembler
270 # is expected to exit unsuccessfully (therefore PROG, objdump, nm,
271 # and objcopy have no meaning and should not be supplied).
273 # Each option may occur at most once.
275 # After the option lines come regexp lines. `run_dump_test' calls
276 # `regexp_diff' to compare the output of the dumping tool against the
277 # regexps in FILE.d. `regexp_diff' is defined later in this file; see
278 # further comments there.
280 proc run_dump_test { name {extra_options {}} } {
282 global OBJDUMP NM OBJCOPY READELF STRIP
283 global OBJDUMPFLAGS NMFLAGS OBJCOPYFLAGS READELFFLAGS STRIPFLAGS
284 global ELFEDIT ELFEDITFLAGS
290 if [string match "*/*" $name] {
292 set name [file tail $name]
294 set file "$srcdir/$subdir/$name"
296 set opt_array [slurp_options "${file}.d"]
297 if { $opt_array == -1 } {
298 perror "error reading options from $file.d"
299 unresolved $subdir/$name
302 set opts(addr2line) {}
315 set opts(DUMPPROG) {}
318 set opts(not-target) {}
320 set opts(not-skip) {}
322 foreach i $opt_array {
323 set opt_name [lindex $i 0]
324 set opt_val [lindex $i 1]
325 if ![info exists opts($opt_name)] {
326 perror "unknown option $opt_name in file $file.d"
327 unresolved $subdir/$name
330 if [string length $opts($opt_name)] {
331 perror "option $opt_name multiply set in $file.d"
332 unresolved $subdir/$name
335 set opts($opt_name) $opt_val
338 foreach i $extra_options {
339 set opt_name [lindex $i 0]
340 set opt_val [lindex $i 1]
341 if ![info exists opts($opt_name)] {
342 perror "unknown option $opt_name given in extra_opts"
343 unresolved $subdir/$name
346 # add extra option to end of existing option, adding space
348 if [string length $opts($opt_name)] {
349 append opts($opt_name) " "
351 append opts($opt_name) $opt_val
354 if { $opts(name) == "" } {
355 set testname "$subdir/$name"
357 set testname $opts(name)
359 verbose "Testing $testname"
361 if {$opts(PROG) == ""} {
362 perror "program isn't set in $file.d"
368 switch -- $opts(PROG) {
369 ar { set program ar }
370 objcopy { set program objcopy }
371 ranlib { set program ranlib }
376 strings { set program strings }
377 elfedit { set program elfedit }
379 perror "unrecognized program option $opts(PROG) in $file.d"
385 if { $opts(DUMPPROG) != "" } {
386 switch -- $opts(DUMPPROG) {
387 addr2line { set dumpprogram addr2line }
388 nm { set dumpprogram nm }
389 objdump { set dumpprogram objdump }
390 readelf { set dumpprogram readelf }
391 size { set dumpprogram size }
393 perror "unrecognized dump program option $opts(DUMPPROG) in $file.d"
398 # Guess which program to run, by seeing which option was specified.
399 foreach p {objdump nm readelf} {
400 if {$opts($p) != ""} {
401 if {$dumpprogram != ""} {
402 perror "ambiguous dump program in $file.d"
412 # Handle skipping the test on specified targets.
413 # You can have both skip/not-skip and target/not-target, but you can't
414 # have both skip and not-skip, or target and not-target, in the same file.
415 if { $opts(skip) != "" } then {
416 if { $opts(not-skip) != "" } then {
417 perror "$testname: mixing skip and not-skip directives is invalid"
421 foreach glob $opts(skip) {
422 if {[istarget $glob]} { return }
425 if { $opts(not-skip) != "" } then {
427 foreach glob $opts(not-skip) {
428 if {[istarget $glob]} {
433 if {$skip} { return }
435 if { $opts(target) != "" } then {
436 if { $opts(not-target) != "" } then {
437 perror "$testname: mixing target and not-target directives is invalid"
442 foreach glob $opts(target) {
443 if {[istarget $glob]} {
449 unsupported $testname
453 if { $opts(not-target) != "" } then {
454 foreach glob $opts(not-target) {
455 if {[istarget $glob]} {
456 unsupported $testname
462 if { $opts(source) == "" } {
463 set srcfile ${file}.s
465 set srcfile $srcdir/$subdir/$opts(source)
468 set exec_output [binutils_assemble ${srcfile} $tempfile]
469 if [string match "" $exec_output] then {
470 send_log "$exec_output\n"
471 verbose "$exec_output"
476 set progopts1 $opts($program)
477 eval set progopts \$[string toupper $program]FLAGS
478 eval set binary \$[string toupper $program]
480 set exec_output [binutils_run $binary "$progopts $progopts1 $tempfile $destopt ${copyfile}.o"]
481 if ![string match "" $exec_output] {
482 send_log "$exec_output\n"
483 verbose "$exec_output"
488 set progopts1 $opts($dumpprogram)
489 eval set progopts \$[string toupper $dumpprogram]FLAGS
490 eval set binary \$[string toupper $dumpprogram]
492 if { ![is_remote host] && [which $binary] == 0 } {
497 verbose "running $binary $progopts $progopts1" 3
499 set cmd "$binary $progopts $progopts1 ${copyfile}.o"
501 # Ensure consistent sorting of symbols
502 if {[info exists env(LC_ALL)]} {
503 set old_lc_all $env(LC_ALL)
507 set comp_output [remote_exec host $cmd "" "/dev/null" "tmpdir/dump.out"]
508 if {[info exists old_lc_all]} {
509 set env(LC_ALL) $old_lc_all
513 if { [lindex $comp_output 0] != 0 } then {
514 send_log "$comp_output\n"
518 set comp_output [prune_warnings [lindex $comp_output 1]]
519 if ![string match "" $comp_output] then {
520 send_log "$comp_output\n"
525 verbose_eval {[file_contents "tmpdir/dump.out"]} 3
526 if { [regexp_diff "tmpdir/dump.out" "${file}.d"] } then {
528 verbose "output is [file_contents "tmpdir/dump.out"]" 2
535 proc slurp_options { file } {
536 if [catch { set f [open $file r] } x] {
537 #perror "couldn't open `$file': $x"
542 # whitespace expression
545 # whitespace is ignored anywhere except within the options list;
546 # option names are alphabetic plus dash
547 set pat "^#${ws}(\[a-zA-Z-\]*)$ws:${ws}(.*)$ws\$"
548 while { [gets $f line] != -1 } {
549 set line [string trim $line]
550 # Whitespace here is space-tab.
551 if [regexp $pat $line xxx opt_name opt_val] {
553 lappend opt_array [list $opt_name $opt_val]
554 } elseif {![regexp "^#" $line ]} {
562 # regexp_diff, based on simple_diff taken from ld test suite
563 # compares two files line-by-line
564 # file1 contains strings, file2 contains regexps and #-comments
565 # blank lines are ignored in either file
566 # returns non-zero if differences exist
568 proc regexp_diff { file_1 file_2 } {
576 if [file exists $file_1] then {
577 set file_a [open $file_1 r]
579 perror "$file_1 doesn't exist"
583 if [file exists $file_2] then {
584 set file_b [open $file_2 r]
586 perror "$file_2 doesn't exist"
591 verbose " Regexp-diff'ing: $file_1 $file_2" 2
596 while { [string length $line_a] == 0 } {
597 if { [gets $file_a line_a] == $eof } {
602 while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
603 if [ string match "#pass" $line_b ] {
607 } elseif [ string match "#..." $line_b ] {
608 if { [gets $file_b line_b] == $eof } {
613 verbose "looking for \"^$line_b$\"" 3
614 while { ![regexp "^$line_b$" "$line_a"] } {
615 verbose "skipping \"$line_a\"" 3
616 if { [gets $file_a line_a] == $eof } {
623 if { [gets $file_b line_b] == $eof } {
631 } elseif { $end_1 && $end_2 } {
633 } elseif { $end_1 } {
634 send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
635 verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
638 } elseif { $end_2 } {
639 send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
640 verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
644 verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
645 if ![regexp "^$line_b$" "$line_a"] {
646 send_log "regexp_diff match failure\n"
647 send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
648 verbose "regexp_diff match failure\n" 3
654 if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
655 send_log "$file_1 and $file_2 are different lengths\n"
656 verbose "$file_1 and $file_2 are different lengths" 3
666 proc file_contents { filename } {
667 set file [open $filename r]
668 set contents [read $file]
673 proc verbose_eval { expr { level 1 } } {
675 if $verbose>$level then { eval verbose "$expr" $level }