1 # Build all of the targets for any given host.....
3 # This file is going to be ugly. It will be VERY specific to the
4 # Cygnus environment and build-process.
6 # Useful targets (rt = recursion target):
7 # (please correct or expand on this)
8 # FIXME: Might some of these be superfluous?
11 # all-cygnus - set up install directories, build 3stage native and all
12 # supported cross targets, then check 3stage'd native
13 # (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
14 # native - set up install directories, build 3stage native
15 # (rt = $(canonhost)-stamp-3stage-1)
16 # build-cygnus - build 3stage native and all supported cross targets
17 # (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
18 # build-latest - build native and all supported cross targets
20 # all-native - set up install directories, build native
22 # all-cross - set up install directories, build all targets
24 # config - configure native and all supported cross targets
25 # (rt = do1-config, do-native-config for cross)
26 # build - build native and all supported cross targets
27 # (rt = do1-build, build-native for cross)
28 # 3build - build 3stage native and all supported cross targets
29 # (rt = all, build-cygnus for cross)
30 # build-all-latest - build 3stage native and all supported cross targets
31 # (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
32 # clean - remove objdir directories, stamp files
35 # To configure/build for fewer targets, specify TARGETS="native cross1 ...".
38 include $(TREE
)/release-info
40 TEST_INSTALL_DISK
= /abc
42 INSTALLDIR
= $(TEST_INSTALL_DISK
)/$(TREE
)-test/$(RELEASE_TAG
)
45 host
:= $(shell $(TREE
)/config.guess
)
52 CXXFLAGS
= -g
-O2
-fexternal-templates
55 log
= 1>$(canonhost
)-build-log
2>&1
56 clog
= 1>$(canonhost
)-check-log
2>&1
57 cyglog
= 1> $(canonhost
)-x-
$$i-cygnus
-build
-log
2>&1
58 latestlog
= 1> $(canonhost
)-x-
$$i-latest
-build
-log
2>&1
59 natlog
= 1> $(canonhost
)-x-
$$i-native
-build
-log
2>&1
61 canonhost
:= $(shell $(TREE
)/config.sub
$(host
))
63 # Convert config.guess results to a simpler form.
64 ifeq ($(canonhost
),sparc-sun-solaris2.1
)
65 canonhost
:= sparc-sun-solaris2
67 ifeq ($(canonhost
),sparc-sun-solaris2.3
)
68 canonhost
:= sparc-sun-solaris2
70 ifeq ($(canonhost
),mips-dec-ultrix4.2
)
71 canonhost
:= mips-dec-ultrix
73 ifeq ($(canonhost
),mips-sgi-irix4.0
.1)
74 canonhost
:= mips-sgi-irix4
76 ifeq ($(canonhost
),mips-sgi-irix4.0
.5H
)
77 canonhost
:= mips-sgi-irix4
79 ifeq ($(canonhost
),rs6000-ibm-aix3.2
)
80 canonhost
:= rs6000-ibm-aix
82 ifeq ($(canonhost
),i486-unknown-sco3.2v4.0
)
83 canonhost
:= i386-sco3.2v4
85 ifeq ($(canonhost
),i386-unknown-sco3.2v4.0
)
86 canonhost
:= i386-sco3.2v4
88 ifeq ($(canonhost
),i386-unknown-sco3.2v4
)
89 canonhost
:= i386-sco3.2v4
91 ifeq ($(canonhost
),i386-unknown-go32
)
92 canonhost
:= i386-go32
94 ifeq ($(canonhost
),i386-unknown-sysv4.2
)
95 canonhost
:= i386-sysv4.2
97 ifeq ($(canonhost
),i386-lynx-lynxos
)
98 canonhost
:= i386-lynx
100 ifeq ($(canonhost
),m68k-lynx-lynxos
)
101 canonhost
:= m68k-lynx
103 ifeq ($(canonhost
),sparc-lynx-lynxos
)
104 canonhost
:= sparc-lynx
106 ifeq ($(canonhost
),rs6000-lynx-lynxos
)
107 canonhost
:= rs6000-lynx
110 ifeq ($(canonhost
),sparc-sun-sunos4.1
.3)
111 TARGETS
= $(NATIVE
) \
118 mips-idt-ecoff mips64-elf mips-elf \
119 m68k-aout m68k-vxworks m68k-coff \
122 sparc-aout sparc-lynx sparc-vxworks \
123 sparclite-aout sparclite-vxworks \
124 sparclite-coff z8k-coff
129 ifeq ($(canonhost
),m68k-sun-sunos4.1
.1)
130 TARGETS
= $(NATIVE
) \
132 GCC
= gcc
-O2
-msoft-float
137 ifeq ($(canonhost
),sparc-sun-solaris2
)
138 TARGETS
= $(NATIVE
) \
141 m68k-aout m68k-coff m68k-vxworks \
143 mipsel-idt-ecoff sparc-lynx
149 ifeq ($(canonhost
),mips-dec-ultrix
)
150 TARGETS
= $(NATIVE
) m68k-aout
155 ifeq ($(canonhost
),mips-sgi-irix4
)
156 TARGETS
= $(NATIVE
) \
157 mips-idt-ecoff sh-hms \
159 CC
= cc -cckr
-Wf
,-XNg1500
-Wf
,-XNk1000
-Wf
,-XNh2000
163 ifeq ($(canonhost
),rs6000-ibm-aix
)
164 TARGETS
= $(NATIVE
) \
170 ifeq ($(canonhost
),m68k-hp-hpux
)
171 TARGETS
= $(NATIVE
) m68k-aout
172 TMPDIR
:= $(shell mkdir
$(canonhost
)-tmpdir
; cd
$(canonhost
)-tmpdir
; pwd
)
179 ifeq ($(canonhost
),hppa1.1
-hp-hpux
)
182 i960-vxworks m68k-aout \
183 m68k-coff m68k-vxworks
190 ifeq ($(canonhost
),i386-sco3.2v4
)
191 TARGETS
= $(NATIVE
) i386-aout
195 ifeq ($(canonhost
),i386-go32
)
200 m68k-aout m68k-coff \
205 GCC
= i386-go32-gcc
-O2
208 MAKEINFOFLAGS
= --no-split
212 ifeq ($(canonhost
),i386-sysv4.2
)
213 TARGETS
= $(NATIVE
) i386-netware
218 ifeq ($(canonhost
),i386-lynx
)
220 CC
= /usr
/cygnus
/progressive
/bin
/gcc
225 ifeq ($(canonhost
),m68k-lynx
)
227 CC
= /usr
/cygnus
/progressive
/bin
/gcc
232 ifeq ($(canonhost
),sparc-lynx
)
234 CC
= /usr
/cygnus
/progressive
/bin
/gcc
239 ifeq ($(canonhost
),rs6000-lynx
)
241 CC
= /usr
/cygnus
/progressive
/bin
/gcc
250 "CXXFLAGS=$(CXXFLAGS)" \
251 "host=$(canonhost)" \
252 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
253 "RELEASE_TAG=$(RELEASE_TAG)" \
256 # set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
257 ifeq ($(patsubst %-lynxos
,lynxos
,$(canonhost
)),lynxos
)
258 FLAGS_TO_PASS
:= $(FLAGS_TO_PASS
) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
262 @echo build started at
`date`
263 [ -d
$(INSTALLDIR
) ] || mkdir
$(INSTALLDIR
)
264 -rm -f
$(ROOTING
)/$(RELEASE_TAG
)
265 ln
-s
$(INSTALLDIR
) $(ROOTING
)/$(RELEASE_TAG
)
266 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) do1
> $(canonhost
)-emacs-native-log
2>&1
267 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) do-latest
> $(canonhost
)-emacs-latest-log
2>&1
271 @echo build started at
`date`
272 [ -d
$(INSTALLDIR
) ] || mkdir
$(INSTALLDIR
)
273 -rm -f
$(ROOTING
)/$(RELEASE_TAG
) && ln
-s
$(INSTALLDIR
) $(ROOTING
)/$(RELEASE_TAG
)
275 # The following line to be used during regular progressive builds
276 # to help developers test, but should be commented out for final
279 # -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
280 @for i in
$(TARGETS
) ; do \
281 if
[ "$$i" = "native" ] ; then \
282 if
[ ! -f
$(canonhost
)-stamp-3stage-done
] ; then \
283 echo
"3staging $(canonhost) native" ; \
284 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) $(canonhost
)-stamp-3stage-done
$(log
) && \
285 echo
" completed successfully" ; \
290 echo
"building $(canonhost) cross to $$i" ; \
291 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i do-cygnus
$(cyglog
) && \
292 echo
" completed successfully" ; \
295 @if
[ ! -f
$(canonhost
)-stamp-3stage-checked
] ; then \
296 echo checking
$(canonhost
) native
; \
297 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) $(canonhost
)-check-3stage
$(clog
) ; \
298 touch
$(canonhost
)-stamp-3stage-checked
; \
305 @echo build started at
`date`
306 [ -d
$(INSTALLDIR
) ] || mkdir
$(INSTALLDIR
)
307 -rm -f
$(ROOTING
)/$(RELEASE_TAG
) && ln
-s
$(INSTALLDIR
) $(ROOTING
)/$(RELEASE_TAG
)
308 # -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
309 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) $(canonhost
)-stamp-3stage-done
$(log
)
313 @echo build started at
`date`
314 @for i in
$(TARGETS
) ; do \
315 if
[ "$$i" = "native" ] ; then \
316 if
[ ! -f
$(canonhost
)-3stage-done
] ; then \
317 echo
"3staging $(canonhost) native" ; \
318 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) $(canonhost
)-stamp-3stage-done
$(log
) && \
319 echo
" completed successfully" ; \
322 echo
"building $(canonhost) cross to $$i:" `date` ; \
323 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build-cygnus
$(cyglog
) && \
324 echo
" completed successfully" ; \
330 @echo build started at
`date`
331 @for i in
$(TARGETS
) ; do \
332 if
[ "$$i" != "native" ] ; then \
333 echo
"building $(canonhost) cross to $$i:" `date` ; \
334 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build-latest
$(latestlog
) && \
335 echo
" completed successfully" ; \
341 [ -d
$(INSTALLDIR
) ] || mkdir
$(INSTALLDIR
)
342 rm -f
$(ROOTING
)/$(RELEASE_TAG
)
343 ln
-s
$(INSTALLDIR
) $(ROOTING
)/$(RELEASE_TAG
)
344 @for i in
$(TARGETS
) ; do \
345 echo
"building $(canonhost) cross to $$i" ; \
346 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i do-native
$(natlog
) && \
347 echo
" completed successfully" ; \
351 [ -d
$(INSTALLDIR
) ] || mkdir
$(INSTALLDIR
)
352 rm -f
$(ROOTING
)/$(RELEASE_TAG
)
353 ln
-s
$(INSTALLDIR
) $(ROOTING
)/$(RELEASE_TAG
)
354 @for i in
$(TARGETS
) ; do \
355 echo
"building $(canonhost) cross to $$i" ; \
356 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build
=$(build
) do-cygnus
$(cyglog
) && \
357 echo
" completed successfully" ; \
361 $(MAKE
) -f build-all.mk build
=$(host
) host
=i386-go32 all-dos
363 @for i in
$(TARGETS
) ; do \
364 echo
"building $(canonhost) cross to $$i" ; \
365 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) host
=$(host
) target
=$$i do-dos
$(cyglog
) && \
366 echo
" completed successfully at `date`" ; \
370 @for i in
$(TARGETS
) ; do \
371 if
[ "$$i" = "native" ] ; then \
372 echo
"config stage1 for $(canonhost)" ; \
373 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) do1-config
$(log
) && \
374 echo
" completed successfully" ; \
376 echo
"config $(canonhost) cross to $$i" ; \
377 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i do-native-config
$(cyglog
) && \
378 echo
" completed successfully" ; \
384 @for i in
$(TARGETS
) ; do \
385 if
[ "$$i" = "native" ] ; then \
386 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) do1-build
$(log
) && \
387 echo
" completed successfully" ; \
389 echo
"building $(canonhost) cross to $$i" ; \
390 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build-native
$(natlog
) && \
391 echo
" completed successfully" ; \
397 @for i in
$(TARGETS
) ; do \
398 if
[ "$$i" = "native" ] ; then \
399 echo
"building 3stage for $(canonhost)" ; \
400 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) all $(log
) && \
401 echo
" completed successfully" ; \
403 echo
"building $(canonhost) cross to $$i" ; \
404 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build-cygnus
$(cyglog
) && \
405 echo
" completed successfully" ; \
410 @for i in
$(TARGETS
) ; do \
411 if
[ "$$i" = "native" ] ; then \
412 echo
"building 3stage for $(canonhost)" ; \
413 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) $(canonhost
)-stamp-3stage-done
$(log
) && \
414 echo
" completed successfully" ; \
416 echo
"building $(canonhost) cross to $$i" ; \
417 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) target
=$$i build-latest
$(cyglog
) && \
418 echo
" completed successfully" ; \
423 $(MAKE
) -f test-build.mk
$(FLAGS_TO_PASS
) clean $(log
)