1 ##############################################################################
3 ## This file is a shell script fragment that supplies the information
4 ## necessary to tailor a template configure script into the configure
5 ## script appropriate for this directory. For more information, check
6 ## any existing configure script.
8 ## Be warned, there are two types of configure.in files. There are those
9 ## used by Autoconf, which are macros which are expanded into a configure
10 ## script by autoconf. The other sort, of which this is one, is executed
11 ## by Cygnus configure.
13 ## For more information on these two systems, check out the documentation
14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
16 ##############################################################################
18 ### To add a new directory to the tree, first choose whether it is a target
19 ### or a host dependent tool. Then put it into the appropriate list
20 ### (library or tools, host or target), doing a dependency sort. For
21 ### example, gdb requires that byacc (or bison) be built first, so it is in
22 ### the ${host_tools} list after byacc and bison.
25 # these libraries are used by various programs built for the host environment
27 host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
29 if [ "${enable_gdbgui}" = "yes" ] ; then
30 host_libs="${host_libs} libgui"
33 # these tools are built for the host environment
35 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
36 prms send-pr gprof gdbtest tgas etc expect dejagnu sim
37 m4 autoconf ispell grep diff rcs cvs fileutils shellutils
38 textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
39 recode release sed utils"
42 # these libraries are built for the target environment, and are built after
43 # the host libraries and the host tools (which may be a cross compiler)
45 target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
48 # these tools are built using the target libs, and are intended to run only
49 # in the target environment
51 # note: any program that *uses* libraries that are in the "target_libs"
52 # list belongs in this list. those programs are also very likely
53 # candidates for the "native_only" list which follows
55 target_tools="target-examples target-groff"
57 ################################################################################
59 ## These two lists are of directories that are to be removed from the
60 ## ${configdirs} list for either cross-compilations or for native-
61 ## compilations. For example, it doesn't make that much sense to
62 ## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
63 ## a native environment.
65 # directories to be built in the native environment only
67 native_only="autoconf cvs emacs emacs19 fileutils find grep gzip hello
68 indent ispell m4 rcs recode sed shellutils tar textutils gash
69 uudecode wdiff gprof target-groff"
71 # directories to be built in a cross environment only
73 cross_only="target-libiberty target-libgloss target-newlib"
75 ## All tools belong in one of the four categories, and are assigned above
76 ## We assign ${configdirs} this way to remove all embedded newlines. This
77 ## is important because configure will choke if they ever get through.
78 ## ${configdirs} is directories we build using the host tools.
79 ## ${target_configdirs} is directories we build using the target tools.
81 configdirs=`echo ${host_libs} ${host_tools}`
82 target_configdirs=`echo ${target_libs} ${target_tools}`
84 ################################################################################
86 srctrigger=move-if-change
87 srcname="gnu development package"
89 # This gets set non-empty for some net releases of packages.
94 # Work in distributions that contain no compiler tools, like Autoconf.
95 if [ -d ${srcdir}/config ]; then
97 m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
98 m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
99 m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
100 m68k-*-linux*) host_makefile_frag=config/mh-linux ;;
101 m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
102 m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
103 m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
104 mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
105 mips*-sgi-irix[56]*) host_makefile_frag=config/mh-irix5 ;;
106 mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
107 mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
108 mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
109 mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
110 i[345]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
111 i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
112 i[345]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
113 i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;;
114 i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
115 i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;;
116 i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
117 i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
118 i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
119 vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
120 *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
121 m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
122 *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
123 *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
124 *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
125 rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
126 *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
127 *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
128 *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
132 # If we aren't going to be using gcc, see if we can extract a definition
133 # of CC from the fragment.
134 if [ -z "${CC}" -a "${build}" = "${host}" ]; then
135 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
138 test -z "$dir" && dir=.
139 if test -f $dir/gcc; then
145 if [ -z "${found}" -a -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
146 xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
147 if [ -n "${xx}" ] ; then
153 # We default to --with-shared on platforms where -fpic is meaningless.
154 # Well, we don't yet, but we will.
155 if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
157 alpha-dec-osf*) enable_shared=yes ;;
158 mips-sgi-irix5*) enable_shared=yes ;;
159 *) enable_shared=no ;;
163 if [ x${enable_shared} = xyes ]; then
166 hppa*) waugh=config/mh-papic ;;
167 i[345]86-*) waugh=config/mh-x86pic ;;
168 sparc64-*) waugh=config/mh-sparcpic ;;
169 *) waugh=config/mh-${host_cpu}pic ;;
171 if [ -f ${srcdir}/${waugh} ]; then
172 if [ -n "${host_makefile_frag}" ] ; then
173 cat ${srcdir}/${host_makefile_frag} > mh-frag
174 cat ${srcdir}/${waugh} >> mh-frag
175 host_makefile_frag=mh-frag
177 host_makefile_frag=${waugh}
185 v810*) target_makefile_frag=config/mt-v810 ;;
186 i[345]86-*-netware*) target_makefile_frag=config/mt-netware ;;
187 powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
195 # some tools are so dependent upon X11 that if we're not building with X,
196 # it's not even worth trying to configure, much less build, that tool.
199 yes | "") # the default value for this tree is that X11 is available
202 skipdirs="${skipdirs} tk gash"
205 echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
209 # Some tools are only suitable for building in a "native" situation.
210 # Those are added when we have a host==target configuration. For cross
211 # toolchains, we add some directories that should only be useful in a
216 if [ x"${host}" = x"${target}" ] ; then
217 # when doing a native toolchain, don't build the targets
218 # that are in the 'cross only' list
219 skipdirs="${skipdirs} ${cross_only}"
223 # similarly, don't build the targets in the 'native only'
224 # list when building a cross compiler
225 skipdirs="${skipdirs} ${native_only}"
226 is_cross_compiler=yes
227 target_subdir=${target_alias}
228 if [ ! -d ${target_subdir} ] ; then
229 if mkdir ${target_subdir} ; then true
231 echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
239 # Handle --with-headers=XXX. The contents of the named directory are
240 # copied to $(tooldir)/sys-include.
241 if [ x"${with_headers}" != x ]; then
242 if [ x${is_cross_compiler} = xno ]; then
243 echo 1>&2 '***' --with-headers is only supported when cross compiling
246 case "${exec_prefixoption}" in
248 *) x=${exec_prefix} ;;
250 copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
253 # Handle --with-libs=XXX. Multiple directories are permitted. The
254 # contents are copied to $(tooldir)/lib.
255 if [ x"${with_libs}" != x ]; then
256 if [ x${is_cross_compiler} = xno ]; then
257 echo 1>&2 '***' --with-libs is only supported when cross compiling
260 # Copy the libraries in reverse order, so that files in the first named
261 # library override files in subsequent libraries.
262 case "${exec_prefixoption}" in
264 *) x=${exec_prefix} ;;
266 for l in ${with_libs}; do
267 copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
271 # If both --with-headers and --with-libs are specified, default to
273 if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
274 if [ x"${with_newlib}" = x ]; then
279 # Recognize --with-newlib/--without-newlib.
280 if [ x${with_newlib} = xno ]; then
281 skipdirs="${skipdirs} target-newlib"
282 elif [ x${with_newlib} = xyes ]; then
283 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
286 # Default to using --with-stabs for certain targets.
287 if [ x${with_stabs} = x ]; then
289 mips*-*-* | alpha*-*-osf* | i[345]86*-*-sysv4* | i[345]86*-*-unixware*)
291 withoptions="${withoptions} --with-stabs"
296 # Handle ${copy_dirs}
297 set fnord ${copy_dirs}
299 while [ $# != 0 ]; do
300 if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
303 echo Copying $1 to $2
305 # Use the install script to create the directory and all required
306 # parent directories.
311 ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
314 # Copy the directory, assuming we have tar.
315 # FIXME: Should we use B in the second tar? Not all systems support it.
316 (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
318 # It is the responsibility of the user to correctly adjust all
319 # symlinks. If somebody can figure out how to handle them correctly
320 # here, feel free to add the code.
327 # Configure extra directories which are host specific
331 configdirs="$configdirs dosrel" ;;
334 # Remove more programs from consideration, based on the host or
335 # target this usually means that a port of the program doesn't
342 noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
345 noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
348 noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs"
351 noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs"
358 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty"
361 noconfigdirs="$noconfigdirs target-newlib"
364 # ld works, but does not support shared libraries. emacs doesn't
365 # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
366 # gas doesn't generate exception information.
367 noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib"
370 # newlib is not 64 bit ready
371 noconfigdirs="$noconfigdirs target-newlib"
380 noconfigdirs="$noconfigdirs ld"
384 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
388 # Do configure ld/binutils/gas for this case.
391 # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
392 # cc is gcc, and on any system a user should be able to link cc to
393 # whatever they want. FIXME, emacs emacs19).
395 "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
398 noconfigdirs="$noconfigdirs ld shellutils"
401 # but don't build gdb
402 noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
406 # make/glob's configure uses some AC_TRY_RUN type tests
407 target_configdirs="$target_configdirs target-winsup"
408 noconfigdirs="$noconfigdirs tcl tk expect make"
409 # always build newlib.
410 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
412 # Can't build gdb for cygwin32 if not native.
413 case "${host}:${build}" in
414 *-*-cygwin32 | *-*-cygwin32:*-*-cygwin32) ;; # keep gdb
415 *) noconfigdirs="$noconfigdirs gdb"
420 noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
422 i[345]86-*-sco3.2v5*)
423 # The linker does not yet know about weak symbols in COFF,
424 # and is not configured to handle mixed ELF and COFF.
425 noconfigdirs="$noconfigdirs gprof ld"
428 noconfigdirs="$noconfigdirs gprof"
430 i[345]86-*-solaris2*)
431 # The linker does static linking correctly, but the Solaris C library
432 # has bugs such that some important functions won't work when statically
433 # linked. (See man pages for getpwuid, for example.)
434 noconfigdirs="$noconfigdirs ld"
437 # The SYSV4 C compiler doesn't handle Emacs correctly
439 "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
442 # but that's okay since emacs doesn't work anyway
443 noconfigdirs="$noconfigdirs emacs emacs19"
446 # copied from rs6000-*-* entry
447 noconfigdirs="$noconfigdirs gprof cvs"
449 powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
450 target_configdirs="$target_configdirs target-winsup"
451 noconfigdirs="$noconfigdirs gdb tcl tk make expect"
452 # always build newlib.
453 skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
456 # The CVS server code doesn't work on the RS/6000
457 # Newlib makes problems for libg++ in crosses.
458 noconfigdirs="$noconfigdirs target-newlib gprof cvs"
461 noconfigdirs="$noconfigdirs gprof"
464 noconfigdirs="$noconfigdirs gdb"
467 noconfigdirs="$noconfigdirs ld binutils gprof"
470 # The GNU linker does not support shared libraries.
471 # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
472 noconfigdirs="$noconfigdirs ld gprof emacs"
475 noconfigdirs="$noconfigdirs gprof"
478 noconfigdirs="$noconfigdirs gprof"
481 noconfigdirs="$noconfigdirs gprof"
484 noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes"
488 i[345]86-*-vsta) ;; # don't add gprof back in
489 i[345]86-*-go32) ;; # don't add gprof back in
490 *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
494 if [ x${is_cross_compiler} != xno ] ; then
495 noconfigdirs="$noconfigdirs gdb gdbtest target-newlib"
501 noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes"
504 noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes"
507 noconfigdirs="$noconfigdirs target-newlib"
510 # Newlib makes problems for libg++ in crosses.
511 noconfigdirs="$noconfigdirs target-newlib"
515 # Macs want a resource compiler.
516 configdirs="$configdirs grez"
520 # targets that need a second pass
523 noconfigdirs="$noconfigdirs libgloss"
527 # If we are building a Canadian Cross, discard tools that can not be built
528 # using a cross compiler. FIXME: These tools should be fixed.
529 if [ "${build}" != "${host}" ]; then
530 noconfigdirs="$noconfigdirs expect dejagnu make texinfo diff"
533 # Make sure we don't let GNU ld be added if we didn't want it.
534 if [ x$with_gnu_ld = xno ]; then
536 noconfigdirs="$noconfigdirs ld"
539 # Make sure we don't let GNU as be added if we didn't want it.
540 if [ x$with_gnu_as = xno ]; then
542 noconfigdirs="$noconfigdirs gas"
545 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
546 # $target_configdirs.
547 # If we have the source for $noconfigdirs entries, add them to $notsupp.
550 for dir in . $skipdirs $noconfigdirs ; do
551 dirname=`echo $dir | sed -e s/target-//g`
552 if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
553 configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
554 if [ -r $srcdir/$dirname/configure ] \
555 || [ -r $srcdir/$dirname/configure.in ]; then
556 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
559 notsupp="$notsupp $dir"
563 if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
564 target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
565 if [ -r $srcdir/$dirname/configure ] \
566 || [ -r $srcdir/$dirname/configure.in ]; then
567 if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
570 notsupp="$notsupp $dir"
576 # Sometimes the tools are distributed with libiberty but with no other
577 # libraries. In that case, we don't want to build target-libiberty.
578 if [ -n "${target_configdirs}" ]; then
580 for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
581 if [ "$i" != "libiberty" ]; then
582 if [ -r $srcdir/$i/configure ] || [ -r $srcdir/$i/configure.in ]; then
588 if [ -z "${others}" ]; then
593 # Deconfigure all subdirectories, in case we are changing the
594 # configuration from one where a subdirectory is supported to one where it
596 if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
597 for i in `echo ${configdirs} | sed -e s/target-//g` ; do
601 if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
602 for i in `echo ${target_configdirs} | sed -e s/target-//` ; do
603 rm -f ${target_subdir}/$i/Makefile
607 # Produce a warning message for the subdirs we can't configure.
608 # This isn't especially interesting in the Cygnus tree, but in the individual
609 # FSF releases, it's important to let people know when their machine isn't
610 # supported by the one or two programs in a package.
612 if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
613 # If $appdirs is non-empty, at least one of those directories must still
614 # be configured, or we error out. (E.g., if the gas release supports a
615 # specified target in some subdirs but not the gas subdir, we shouldn't
616 # pretend that all is well.)
617 if [ -n "$appdirs" ]; then
618 for dir in $appdirs ; do
619 if [ -r $dir/Makefile.in ]; then
620 if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
624 if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
630 if [ -n "$appdirs" ]; then
631 echo "*** This configuration is not supported by this package." 1>&2
635 # Okay, some application will build, or we don't care to check. Still
636 # notify of subdirs not getting built.
637 echo "*** This configuration is not supported in the following subdirectories:" 1>&2
638 echo " ${notsupp}" 1>&2
639 echo " (Any other directories should still work fine.)" 1>&2
642 # Set with_gnu_as and with_gnu_ld as appropriate.
644 # This is done by determining whether or not the appropriate directory
645 # is available, and by checking whether or not specific configurations
646 # have requested that this magic not happen.
648 # The command line options always override the explicit settings in
649 # configure.in, and the settings in configure.in override this magic.
651 # If the default for a toolchain is to use GNU as and ld, and you don't
652 # want to do that, then you should use the --without-gnu-as and
653 # --without-gnu-ld options for the configure script.
655 if [ x${use_gnu_as} = x ] ; then
656 if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
658 withoptions="$withoptions --with-gnu-as"
662 if [ x${use_gnu_ld} = x ] ; then
663 if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
665 withoptions="$withoptions --with-gnu-ld"
669 if [ x${enable_shared} = xyes ]; then
671 hppa*) target_makefile_frag=config/mt-papic ;;
672 i[345]86-*) target_makefile_frag=config/mt-x86pic ;;
673 *) target_makefile_frag=config/mt-${target_cpu}pic ;;
679 # Make sure that the compiler is able to generate an executable. If it
680 # can't, we are probably in trouble. We don't care whether we can run the
681 # executable--we might be using a cross compiler--we only care whether it
682 # can be created. At this point the main configure script has set CC.
683 echo "int main () { return 0; }" > conftest.c
684 ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
685 if [ $? = 0 ] && [ -s conftest ]; then
688 echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
689 echo 1>&2 "*** You must set the environment variable CC to a working compiler."
695 # The Solaris /usr/ucb/cc compiler does not appear to work.
698 if [ "`/usr/bin/which ${CC-cc}`" = "/usr/ucb/cc" ] ; then
700 [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
701 if [ -d /opt/cygnus/bin ] ; then
702 if [ "$could_use" = "" ] ; then
703 could_use="/opt/cygnus/bin"
705 could_use="$could_use or /opt/cygnus/bin"
708 if [ "$could_use" = "" ] ; then
709 echo "Warning: compilation may fail because you're using"
710 echo "/usr/ucb/cc. You should change your PATH or CC "
711 echo "variable and rerun configure."
713 echo "Warning: compilation may fail because you're using"
714 echo "/usr/ucb/cc, when you should use the C compiler from"
715 echo "$could_use. You should change your"
716 echo "PATH or CC variable and rerun configure."
722 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
723 # binutils tools will find libbfd.so.
724 if [ "${enable_shared}" = "yes" ]; then
725 sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
726 Makefile > Makefile.tem
728 mv -f Makefile.tem Makefile
732 sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
733 Makefile > Makefile.tem
735 mv -f Makefile.tem Makefile
740 # Record target_configdirs and the configure arguments in Makefile.
741 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
742 targargs=`echo "${arguments}" | \
743 sed -e 's/--norecursion//' \
744 -e 's/--cache[a-z-]*=[^ ]*//' \
745 -e 's/--ho[a-z-]*=[^ ]*//' \
746 -e 's/--ta[a-z-]*=[^ ]*//'`
748 # Passing a --with-cross-host argument lets the target libraries know
749 # whether they are being built with a cross-compiler or being built
750 # native. However, it would be better to use other mechanisms to make the
751 # sorts of decisions they want to make on this basis. Please consider
752 # this option to be deprecated. FIXME.
753 if [ x${is_cross_compiler} = xyes ]; then
754 targargs="--with-cross-host=${host_alias} ${targargs}"
757 targargs="--host=${target_alias} ${targargs}"
758 sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
759 -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
760 -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
761 Makefile > Makefile.tem
763 mv -f Makefile.tem Makefile