configure.in

   1 ##############################################################################
   2
   3 ## This file is a shell script fragment that supplies the information
   4 ## necessary to tailor a template configure script into the configure
   5 ## script appropriate for this directory.  For more information, check
   6 ## any existing configure script.
   7
   8 ## Be warned, there are two types of configure.in files.  There are those
   9 ## used by Autoconf, which are macros which are expanded into a configure
  10 ## script by autoconf.  The other sort, of which this is one, is executed
  11 ## by Cygnus configure.
  12
  13 ## For more information on these two systems, check out the documentation
  14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
  15
  16 ##############################################################################
  17
  18 ### To add a new directory to the tree, first choose whether it is a target
  19 ### or a host dependent tool.  Then put it into the appropriate list
  20 ### (library or tools, host or target), doing a dependency sort.  For
  21 ### example, gdb requires that byacc (or bison) be built first, so it is in
  22 ### the ${host_tools} list after byacc and bison.
  23
  24
  25 # these libraries are used by various programs built for the host environment
  26 #
  27 host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
  28
  29 # these tools are built for the host environment
  30 #
  31 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
  32             prms send-pr gprof gdbtest tgas etc expect dejagnu sim
  33             m4 autoconf ispell grep diff rcs cvs fileutils shellutils
  34             textutils wdiff find emacs uudecode hello tar gzip indent
  35             recode release sed utils"
  36
  37
  38 # these libraries are built for the target environment, and are built after
  39 # the host libraries and the host tools (which may be a cross compiler)
  40 #
  41 target_libs="libm xiberty newlib libio libg++"
  42
  43 ## start-sanitize-chill
  44 target_libs="${target_libs} chill chillrt"
  45 ## end-sanitize-chill
  46
  47 # these tools are built using the target libs, and are intended to run only
  48 # in the target environment.  we currently have none.
  49 #
  50 # note: any program that *uses* libraries that are in the "target_libs"
  51 # list belongs in this list.  those programs are also very likely
  52 # candidates for the "native_only" list which follows
  53 #
  54 target_tools="groff"
  55
  56 ################################################################################
  57
  58 ## These two lists are of directories that are to be removed from the
  59 ## ${configdirs} list for either cross-compilations or for native-
  60 ## compilations.  For example, it doesn't make that much sense to
  61 ## cross-compile Emacs, nor is it terribly useful to compile xiberty in
  62 ## a native environment.
  63
  64 # directories to be built in the native environment only
  65 #
  66 native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
  67              ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff
  68              gprof"
  69
  70 # directories to be built in a cross environment only
  71 #
  72 cross_only="xiberty newlib"
  73
  74 ## All tools belong in one of the four categories, and are assigned above
  75 #
  76 configdirs="${host_libs} ${host_tools} ${target_libs} ${target_tools}"
  77
  78 ################################################################################
  79
  80 srctrigger=move-if-change
  81 srcname="gnu development package"
  82
  83 # per-host:
  84
  85 case "${host}" in
  86   m68k-hp-hpux)           host_makefile_frag=config/mh-hp300 ;;
  87   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
  88   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
  89   m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
  90   m88k-dg-dgux*)          host_makefile_frag=config/mh-dgux ;;
  91   mips*-dec-ultrix*)      host_makefile_frag=config/mh-decstation ;;
  92   mips*-sgi-irix4*)       host_makefile_frag=config/mh-irix4 ;;
  93   mips*-sgi-irix3*)       host_makefile_frag=config/mh-sysv ;;
  94   mips*-*-sysv*)          host_makefile_frag=config/mh-riscos ;;
  95   i[34]86-ncr-sysv4*)     host_makefile_frag=config/mh-ncr3000 ;;
  96   i[34]86-*-sco*)         host_makefile_frag=config/mh-sco ;;
  97   i[34]86-*-isc*)         host_makefile_frag=config/mh-sysv ;;
  98   i[34]86-*-linux)        host_makefile_frag=config/mh-linux ;;
  99   i[34]86-*-solaris2*)    host_makefile_frag=config/mh-sysv4 ;;
 100   i[34]86-*-aix*)         host_makefile_frag=config/mh-aix386 ;;
 101   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
 102   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
 103   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
 104   *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
 105   m68k-sun-*)             host_makefile_frag=config/mh-sun3 ;;
 106   *-sun-*)                host_makefile_frag=config/mh-sun ;;
 107   *-hp-hpux)              host_makefile_frag=config/mh-hpux ;;
 108   *-*-hiux*)              host_makefile_frag=config/mh-hpux ;;
 109   *-*-lynxos*)            host_makefile_frag=config/mh-lynxos ;;
 110   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
 111   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 112 esac
 113
 114 # per-target:
 115
 116 gasdir=gas
 117 use_gnu_ld=
 118 use_gnu_as=
 119
 120 case "${target}" in
 121   hppa*-hp-hpux)          target_makefile_frag=config/mt-hppa ;;
 122 esac
 123
 124 # some tools are so dependent upon X11 that if we're not building with X,
 125 # it's not even worth trying to configure, much less build, that tool.
 126
 127 case ${with_x} in
 128   yes | "")  # the default value for this tree is that X11 is available
 129         ;;
 130   no)
 131         configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
 132         ;;
 133   *)
 134         echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
 135         ;;
 136 esac
 137
 138
 139
 140 # Some tools are only suitable for building in a "native" situation.
 141 # Those are added when we have a host==target configuration.  For cross
 142 # toolchains, we add some directories that should only be useful in a
 143 # cross-compiler.
 144
 145 if [ x"${host}" = x"${target}" ] ; then
 146         # when doing a native toolchain, don't build the targets
 147         # that are in the 'cross only' list
 148         for i in ${cross_only} ; do
 149           configdirs=`echo ${configdirs} | sed -e "s/$i//"`
 150         done
 151 else
 152         # similarly, don't build the targets in the 'native only'
 153         # list when building a cross compiler
 154         for i in ${native_only} ; do
 155           configdirs=`echo ${configdirs} | sed -e "s/$i//"`
 156         done
 157 fi
 158
 159 ## start-sanitize-for-fsf
 160
 161 # Remove more programs from consideration, based on the host or
 162 # target this usually means that a port of the program doesn't
 163 # exist yet.  This section gets removed for FSF releases,
 164 # where we want the configure scripts in the subdirectories to
 165 # complain if the target or host isn't supported.
 166
 167 case "${host}" in
 168   alpha-dec-osf1*)
 169     configdirs=`echo ${configdirs} | sed -e 's/gdb//'`
 170     ;;
 171   i[34]86-*-go32)
 172     configdirs=`echo ${configdirs} | sed -e 's/tcl//;s/expect//;s/deja-gnu//'`
 173     configdirs=`echo ${configdirs} | sed -e 's/make//;s/texinfo//;s/bison//'`
 174     configdirs=`echo ${configdirs} | sed -e 's/patch//;s/flex//;s/byacc//'`
 175     configdirs=`echo ${configdirs} | sed -e 's/send-pr//;s/gprof//'`
 176     configdirs=`echo ${configdirs} | sed -e 's/uudecode//;s/dejagnu//'`
 177     configdirs=`echo ${configdirs} | sed -e 's/diff//'`
 178     ;;
 179 esac
 180
 181 case "${target}" in
 182   alpha-dec-osf1*)
 183     configdirs=`echo ${configdirs} | sed -e 's/gas //'`
 184     configdirs=`echo ${configdirs} | sed -e 's/gdb//;s/emacs//;s/fileutils//'`
 185     configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//;s/libio//'`
 186     ;;
 187   h8300*-*-*)
 188     configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
 189 ## start-sanitize-chill
 190     configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
 191 ## end-sanitize-chill
 192     ;;
 193   h8500-*-*)
 194     configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
 195 ## start-sanitize-chill
 196     configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
 197 ## end-sanitize-chill
 198     ;;
 199   hppa*-*-osf)
 200     # Do configure ld/binutils/gas for this case.
 201     ;;
 202   m68k-hp-hpux*)
 203     configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
 204     ;;
 205   hppa*-*-*)
 206     # HP's C compiler doesn't handle Emacs correctly
 207     case "${CC}" in
 208         "" | cc*) configdirs=`echo ${configdirs} | sed -e 's/emacs//'` ;;
 209         *) echo "building emacs" ;;
 210     esac
 211     configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas /pagas /;s/shellutils//'`
 212     gasdir=pagas
 213     ;;
 214   i[34]86-*-go32)
 215     # add the go32 support tools to the list
 216     configdirs=`echo go32 ${configdirs}`
 217     ;;
 218   i[34]86-*-sysv4*)
 219     # The SYSV4 C compiler doesn't handle Emacs correctly
 220     case "${CC}" in
 221         "" | cc*) configdirs=`echo ${configdirs} | sed -e 's/emacs//'` ;;
 222         *) ;;
 223     esac
 224     # but that's okay since emacs doesn't work anyway
 225     configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
 226     ;;
 227   rs6000-*-*)
 228     # a gcc built textutils will cause the linker to hang on 'join'
 229     configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //;s/gprof//;s/textutils//'`
 230     ;;
 231   mips-*-*)
 232     configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
 233     ;;
 234   sh-*-*)
 235     case "${host}" in
 236       i[34]86-*-go32) ;; # don't add gprof
 237       *) configdirs=`echo gprof ${configdirs}` ;;
 238     esac
 239     ;;
 240   sparc-*-sunos4*)
 241     use_gnu_ld=no
 242     ;;
 243   sparc-*-solaris2*)
 244     configdirs=`echo ${configdirs} | sed -e 's/ld//'`
 245     ;;
 246   i[34]86-*-sco*)
 247     configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
 248     ;;
 249   *-*-sysv4)
 250     use_gnu_ld=no
 251     ;;
 252   *-*-vms)
 253     configdirs=`echo ${configdirs} | sed -e 's/bfd//;s/ld//;s/binutils//'`
 254     ;;
 255 esac
 256
 257 ## end-sanitize-for-fsf
 258
 259 # Set with_gnu_as and with_gnu_ld as appropriate.
 260 #
 261 # This is done by determining whether or not the appropriate directory
 262 # is available, and by checking whether or not specific configurations
 263 # have requested that this magic not happen.
 264 #
 265 # The command line options always override the explicit settings in
 266 # configure.in, and the settings in configure.in override this magic.
 267 #
 268 # If the default for a toolchain is to use GNU as and ld, and you don't
 269 # want to do that, then you should use the --without-gnu-as and
 270 # --without-gnu-ld options for the configure script.
 271
 272 if [ x${use_gnu_as} = x ] ; then
 273   if [ x${with_gnu_as} != xno ] && echo ${configdirs} | grep "${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
 274     with_gnu_as=yes
 275     withoptions="$withoptions --with-gnu-as"
 276   fi
 277 fi
 278
 279 if [ x${use_gnu_ld} = x ] ; then
 280   if [ x${with_gnu_ld} != xno ] && echo ${configdirs} | grep ld > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
 281     with_gnu_ld=yes
 282     withoptions="$withoptions --with-gnu-ld"
 283   fi
 284 fi
 285
 286 #
 287 # Local Variables:
 288 # fill-column: 131
 289 # End:
 290 #