drivers/acpi/acpica/hwgpe.c

   1 /******************************************************************************
   2  *
   3  * Module Name: hwgpe - Low level GPE enable/disable/clear functions
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acevents.h"
  47
  48 #define _COMPONENT          ACPI_HARDWARE
  49 ACPI_MODULE_NAME("hwgpe")
  50 #if (!ACPI_REDUCED_HARDWARE)    /* Entire module */
  51 /* Local prototypes */
  52 static acpi_status
  53 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  54                                 struct acpi_gpe_block_info *gpe_block,
  55                                 void *context);
  56
  57 /******************************************************************************
  58  *
  59  * FUNCTION:    acpi_hw_get_gpe_register_bit
  60  *
  61  * PARAMETERS:  gpe_event_info      - Info block for the GPE
  62  *
  63  * RETURN:      Register mask with a one in the GPE bit position
  64  *
  65  * DESCRIPTION: Compute the register mask for this GPE. One bit is set in the
  66  *              correct position for the input GPE.
  67  *
  68  ******************************************************************************/
  69
  70 u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info)
  71 {
  72
  73         return ((u32)1 <<
  74                 (gpe_event_info->gpe_number -
  75                  gpe_event_info->register_info->base_gpe_number));
  76 }
  77
  78 /******************************************************************************
  79  *
  80  * FUNCTION:    acpi_hw_low_set_gpe
  81  *
  82  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be disabled
  83  *              action              - Enable or disable
  84  *
  85  * RETURN:      Status
  86  *
  87  * DESCRIPTION: Enable or disable a single GPE in the parent enable register.
  88  *
  89  ******************************************************************************/
  90
  91 acpi_status
  92 acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
  93 {
  94         struct acpi_gpe_register_info *gpe_register_info;
  95         acpi_status status;
  96         u32 enable_mask;
  97         u32 register_bit;
  98
  99         ACPI_FUNCTION_ENTRY();
 100
 101         /* Get the info block for the entire GPE register */
 102
 103         gpe_register_info = gpe_event_info->register_info;
 104         if (!gpe_register_info) {
 105                 return (AE_NOT_EXIST);
 106         }
 107
 108         /* Get current value of the enable register that contains this GPE */
 109
 110         status = acpi_hw_read(&enable_mask, &gpe_register_info->enable_address);
 111         if (ACPI_FAILURE(status)) {
 112                 return (status);
 113         }
 114
 115         /* Set or clear just the bit that corresponds to this GPE */
 116
 117         register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 118         switch (action) {
 119         case ACPI_GPE_CONDITIONAL_ENABLE:
 120
 121                 /* Only enable if the enable_for_run bit is set */
 122
 123                 if (!(register_bit & gpe_register_info->enable_for_run)) {
 124                         return (AE_BAD_PARAMETER);
 125                 }
 126
 127                 /*lint -fallthrough */
 128
 129         case ACPI_GPE_ENABLE:
 130
 131                 ACPI_SET_BIT(enable_mask, register_bit);
 132                 break;
 133
 134         case ACPI_GPE_DISABLE:
 135
 136                 ACPI_CLEAR_BIT(enable_mask, register_bit);
 137                 break;
 138
 139         default:
 140
 141                 ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u", action));
 142                 return (AE_BAD_PARAMETER);
 143         }
 144
 145         /* Write the updated enable mask */
 146
 147         status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
 148         return (status);
 149 }
 150
 151 /******************************************************************************
 152  *
 153  * FUNCTION:    acpi_hw_clear_gpe
 154  *
 155  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be cleared
 156  *
 157  * RETURN:      Status
 158  *
 159  * DESCRIPTION: Clear the status bit for a single GPE.
 160  *
 161  ******************************************************************************/
 162
 163 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 164 {
 165         struct acpi_gpe_register_info *gpe_register_info;
 166         acpi_status status;
 167         u32 register_bit;
 168
 169         ACPI_FUNCTION_ENTRY();
 170
 171         /* Get the info block for the entire GPE register */
 172
 173         gpe_register_info = gpe_event_info->register_info;
 174         if (!gpe_register_info) {
 175                 return (AE_NOT_EXIST);
 176         }
 177
 178         /*
 179          * Write a one to the appropriate bit in the status register to
 180          * clear this GPE.
 181          */
 182         register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 183
 184         status = acpi_hw_write(register_bit,
 185                                &gpe_register_info->status_address);
 186
 187         return (status);
 188 }
 189
 190 /******************************************************************************
 191  *
 192  * FUNCTION:    acpi_hw_get_gpe_status
 193  *
 194  * PARAMETERS:  gpe_event_info      - Info block for the GPE to queried
 195  *              event_status        - Where the GPE status is returned
 196  *
 197  * RETURN:      Status
 198  *
 199  * DESCRIPTION: Return the status of a single GPE.
 200  *
 201  ******************************************************************************/
 202
 203 acpi_status
 204 acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 205                        acpi_event_status * event_status)
 206 {
 207         u32 in_byte;
 208         u32 register_bit;
 209         struct acpi_gpe_register_info *gpe_register_info;
 210         acpi_event_status local_event_status = 0;
 211         acpi_status status;
 212
 213         ACPI_FUNCTION_ENTRY();
 214
 215         if (!event_status) {
 216                 return (AE_BAD_PARAMETER);
 217         }
 218
 219         /* Get the info block for the entire GPE register */
 220
 221         gpe_register_info = gpe_event_info->register_info;
 222
 223         /* Get the register bitmask for this GPE */
 224
 225         register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
 226
 227         /* GPE currently enabled? (enabled for runtime?) */
 228
 229         if (register_bit & gpe_register_info->enable_for_run) {
 230                 local_event_status |= ACPI_EVENT_FLAG_ENABLED;
 231         }
 232
 233         /* GPE enabled for wake? */
 234
 235         if (register_bit & gpe_register_info->enable_for_wake) {
 236                 local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
 237         }
 238
 239         /* GPE currently active (status bit == 1)? */
 240
 241         status = acpi_hw_read(&in_byte, &gpe_register_info->status_address);
 242         if (ACPI_FAILURE(status)) {
 243                 return (status);
 244         }
 245
 246         if (register_bit & in_byte) {
 247                 local_event_status |= ACPI_EVENT_FLAG_SET;
 248         }
 249
 250         /* Set return value */
 251
 252         (*event_status) = local_event_status;
 253         return (AE_OK);
 254 }
 255
 256 /******************************************************************************
 257  *
 258  * FUNCTION:    acpi_hw_disable_gpe_block
 259  *
 260  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 261  *              gpe_block           - Gpe Block info
 262  *
 263  * RETURN:      Status
 264  *
 265  * DESCRIPTION: Disable all GPEs within a single GPE block
 266  *
 267  ******************************************************************************/
 268
 269 acpi_status
 270 acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 271                           struct acpi_gpe_block_info *gpe_block, void *context)
 272 {
 273         u32 i;
 274         acpi_status status;
 275
 276         /* Examine each GPE Register within the block */
 277
 278         for (i = 0; i < gpe_block->register_count; i++) {
 279
 280                 /* Disable all GPEs in this register */
 281
 282                 status =
 283                     acpi_hw_write(0x00,
 284                                   &gpe_block->register_info[i].enable_address);
 285                 if (ACPI_FAILURE(status)) {
 286                         return (status);
 287                 }
 288         }
 289
 290         return (AE_OK);
 291 }
 292
 293 /******************************************************************************
 294  *
 295  * FUNCTION:    acpi_hw_clear_gpe_block
 296  *
 297  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 298  *              gpe_block           - Gpe Block info
 299  *
 300  * RETURN:      Status
 301  *
 302  * DESCRIPTION: Clear status bits for all GPEs within a single GPE block
 303  *
 304  ******************************************************************************/
 305
 306 acpi_status
 307 acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 308                         struct acpi_gpe_block_info *gpe_block, void *context)
 309 {
 310         u32 i;
 311         acpi_status status;
 312
 313         /* Examine each GPE Register within the block */
 314
 315         for (i = 0; i < gpe_block->register_count; i++) {
 316
 317                 /* Clear status on all GPEs in this register */
 318
 319                 status =
 320                     acpi_hw_write(0xFF,
 321                                   &gpe_block->register_info[i].status_address);
 322                 if (ACPI_FAILURE(status)) {
 323                         return (status);
 324                 }
 325         }
 326
 327         return (AE_OK);
 328 }
 329
 330 /******************************************************************************
 331  *
 332  * FUNCTION:    acpi_hw_enable_runtime_gpe_block
 333  *
 334  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 335  *              gpe_block           - Gpe Block info
 336  *
 337  * RETURN:      Status
 338  *
 339  * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
 340  *              combination wake/run GPEs.
 341  *
 342  ******************************************************************************/
 343
 344 acpi_status
 345 acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 346                                  struct acpi_gpe_block_info * gpe_block,
 347                                  void *context)
 348 {
 349         u32 i;
 350         acpi_status status;
 351
 352         /* NOTE: assumes that all GPEs are currently disabled */
 353
 354         /* Examine each GPE Register within the block */
 355
 356         for (i = 0; i < gpe_block->register_count; i++) {
 357                 if (!gpe_block->register_info[i].enable_for_run) {
 358                         continue;
 359                 }
 360
 361                 /* Enable all "runtime" GPEs in this register */
 362
 363                 status =
 364                     acpi_hw_write(gpe_block->register_info[i].enable_for_run,
 365                                   &gpe_block->register_info[i].enable_address);
 366                 if (ACPI_FAILURE(status)) {
 367                         return (status);
 368                 }
 369         }
 370
 371         return (AE_OK);
 372 }
 373
 374 /******************************************************************************
 375  *
 376  * FUNCTION:    acpi_hw_enable_wakeup_gpe_block
 377  *
 378  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 379  *              gpe_block           - Gpe Block info
 380  *
 381  * RETURN:      Status
 382  *
 383  * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
 384  *              combination wake/run GPEs.
 385  *
 386  ******************************************************************************/
 387
 388 static acpi_status
 389 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 390                                 struct acpi_gpe_block_info *gpe_block,
 391                                 void *context)
 392 {
 393         u32 i;
 394         acpi_status status;
 395
 396         /* Examine each GPE Register within the block */
 397
 398         for (i = 0; i < gpe_block->register_count; i++) {
 399                 if (!gpe_block->register_info[i].enable_for_wake) {
 400                         continue;
 401                 }
 402
 403                 /* Enable all "wake" GPEs in this register */
 404
 405                 status =
 406                     acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
 407                                   &gpe_block->register_info[i].enable_address);
 408                 if (ACPI_FAILURE(status)) {
 409                         return (status);
 410                 }
 411         }
 412
 413         return (AE_OK);
 414 }
 415
 416 /******************************************************************************
 417  *
 418  * FUNCTION:    acpi_hw_disable_all_gpes
 419  *
 420  * PARAMETERS:  None
 421  *
 422  * RETURN:      Status
 423  *
 424  * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 425  *
 426  ******************************************************************************/
 427
 428 acpi_status acpi_hw_disable_all_gpes(void)
 429 {
 430         acpi_status status;
 431
 432         ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
 433
 434         status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL);
 435         status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
 436         return_ACPI_STATUS(status);
 437 }
 438
 439 /******************************************************************************
 440  *
 441  * FUNCTION:    acpi_hw_enable_all_runtime_gpes
 442  *
 443  * PARAMETERS:  None
 444  *
 445  * RETURN:      Status
 446  *
 447  * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 448  *
 449  ******************************************************************************/
 450
 451 acpi_status acpi_hw_enable_all_runtime_gpes(void)
 452 {
 453         acpi_status status;
 454
 455         ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
 456
 457         status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL);
 458         return_ACPI_STATUS(status);
 459 }
 460
 461 /******************************************************************************
 462  *
 463  * FUNCTION:    acpi_hw_enable_all_wakeup_gpes
 464  *
 465  * PARAMETERS:  None
 466  *
 467  * RETURN:      Status
 468  *
 469  * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
 470  *
 471  ******************************************************************************/
 472
 473 acpi_status acpi_hw_enable_all_wakeup_gpes(void)
 474 {
 475         acpi_status status;
 476
 477         ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
 478
 479         status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
 480         return_ACPI_STATUS(status);
 481 }
 482
 483 #endif                          /* !ACPI_REDUCED_HARDWARE */