drivers/acpi/acpica/nsinit.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nsinit - namespace initialization
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2014, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47 #include "acdispat.h"
  48 #include "acinterp.h"
  49
  50 #define _COMPONENT          ACPI_NAMESPACE
  51 ACPI_MODULE_NAME("nsinit")
  52
  53 /* Local prototypes */
  54 static acpi_status
  55 acpi_ns_init_one_object(acpi_handle obj_handle,
  56                         u32 level, void *context, void **return_value);
  57
  58 static acpi_status
  59 acpi_ns_init_one_device(acpi_handle obj_handle,
  60                         u32 nesting_level, void *context, void **return_value);
  61
  62 static acpi_status
  63 acpi_ns_find_ini_methods(acpi_handle obj_handle,
  64                          u32 nesting_level, void *context, void **return_value);
  65
  66 /*******************************************************************************
  67  *
  68  * FUNCTION:    acpi_ns_initialize_objects
  69  *
  70  * PARAMETERS:  None
  71  *
  72  * RETURN:      Status
  73  *
  74  * DESCRIPTION: Walk the entire namespace and perform any necessary
  75  *              initialization on the objects found therein
  76  *
  77  ******************************************************************************/
  78
  79 acpi_status acpi_ns_initialize_objects(void)
  80 {
  81         acpi_status status;
  82         struct acpi_init_walk_info info;
  83
  84         ACPI_FUNCTION_TRACE(ns_initialize_objects);
  85
  86         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
  87                           "**** Starting initialization of namespace objects ****\n"));
  88         ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
  89                               "Completing Region/Field/Buffer/Package initialization:\n"));
  90
  91         /* Set all init info to zero */
  92
  93         ACPI_MEMSET(&info, 0, sizeof(struct acpi_init_walk_info));
  94
  95         /* Walk entire namespace from the supplied root */
  96
  97         status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
  98                                      ACPI_UINT32_MAX, acpi_ns_init_one_object,
  99                                      NULL, &info, NULL);
 100         if (ACPI_FAILURE(status)) {
 101                 ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
 102         }
 103
 104         ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
 105                               "    Initialized %u/%u Regions %u/%u Fields %u/%u "
 106                               "Buffers %u/%u Packages (%u nodes)\n",
 107                               info.op_region_init, info.op_region_count,
 108                               info.field_init, info.field_count,
 109                               info.buffer_init, info.buffer_count,
 110                               info.package_init, info.package_count,
 111                               info.object_count));
 112
 113         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 114                           "%u Control Methods found\n", info.method_count));
 115         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 116                           "%u Op Regions found\n", info.op_region_count));
 117
 118         return_ACPI_STATUS(AE_OK);
 119 }
 120
 121 /*******************************************************************************
 122  *
 123  * FUNCTION:    acpi_ns_initialize_devices
 124  *
 125  * PARAMETERS:  None
 126  *
 127  * RETURN:      acpi_status
 128  *
 129  * DESCRIPTION: Walk the entire namespace and initialize all ACPI devices.
 130  *              This means running _INI on all present devices.
 131  *
 132  *              Note: We install PCI config space handler on region access,
 133  *              not here.
 134  *
 135  ******************************************************************************/
 136
 137 acpi_status acpi_ns_initialize_devices(void)
 138 {
 139         acpi_status status;
 140         struct acpi_device_walk_info info;
 141
 142         ACPI_FUNCTION_TRACE(ns_initialize_devices);
 143
 144         /* Init counters */
 145
 146         info.device_count = 0;
 147         info.num_STA = 0;
 148         info.num_INI = 0;
 149
 150         ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
 151                               "Initializing Device/Processor/Thermal objects "
 152                               "and executing _INI/_STA methods:\n"));
 153
 154         /* Tree analysis: find all subtrees that contain _INI methods */
 155
 156         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 157                                         ACPI_UINT32_MAX, FALSE,
 158                                         acpi_ns_find_ini_methods, NULL, &info,
 159                                         NULL);
 160         if (ACPI_FAILURE(status)) {
 161                 goto error_exit;
 162         }
 163
 164         /* Allocate the evaluation information block */
 165
 166         info.evaluate_info =
 167             ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 168         if (!info.evaluate_info) {
 169                 status = AE_NO_MEMORY;
 170                 goto error_exit;
 171         }
 172
 173         /*
 174          * Execute the "global" _INI method that may appear at the root. This
 175          * support is provided for Windows compatibility (Vista+) and is not
 176          * part of the ACPI specification.
 177          */
 178         info.evaluate_info->prefix_node = acpi_gbl_root_node;
 179         info.evaluate_info->relative_pathname = METHOD_NAME__INI;
 180         info.evaluate_info->parameters = NULL;
 181         info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE;
 182
 183         status = acpi_ns_evaluate(info.evaluate_info);
 184         if (ACPI_SUCCESS(status)) {
 185                 info.num_INI++;
 186         }
 187
 188         /* Walk namespace to execute all _INIs on present devices */
 189
 190         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
 191                                         ACPI_UINT32_MAX, FALSE,
 192                                         acpi_ns_init_one_device, NULL, &info,
 193                                         NULL);
 194
 195         /*
 196          * Any _OSI requests should be completed by now. If the BIOS has
 197          * requested any Windows OSI strings, we will always truncate
 198          * I/O addresses to 16 bits -- for Windows compatibility.
 199          */
 200         if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) {
 201                 acpi_gbl_truncate_io_addresses = TRUE;
 202         }
 203
 204         ACPI_FREE(info.evaluate_info);
 205         if (ACPI_FAILURE(status)) {
 206                 goto error_exit;
 207         }
 208
 209         ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
 210                               "    Executed %u _INI methods requiring %u _STA executions "
 211                               "(examined %u objects)\n",
 212                               info.num_INI, info.num_STA, info.device_count));
 213
 214         return_ACPI_STATUS(status);
 215
 216 error_exit:
 217         ACPI_EXCEPTION((AE_INFO, status, "During device initialization"));
 218         return_ACPI_STATUS(status);
 219 }
 220
 221 /*******************************************************************************
 222  *
 223  * FUNCTION:    acpi_ns_init_one_object
 224  *
 225  * PARAMETERS:  obj_handle      - Node
 226  *              level           - Current nesting level
 227  *              context         - Points to a init info struct
 228  *              return_value    - Not used
 229  *
 230  * RETURN:      Status
 231  *
 232  * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every object
 233  *              within the  namespace.
 234  *
 235  *              Currently, the only objects that require initialization are:
 236  *              1) Methods
 237  *              2) Op Regions
 238  *
 239  ******************************************************************************/
 240
 241 static acpi_status
 242 acpi_ns_init_one_object(acpi_handle obj_handle,
 243                         u32 level, void *context, void **return_value)
 244 {
 245         acpi_object_type type;
 246         acpi_status status = AE_OK;
 247         struct acpi_init_walk_info *info =
 248             (struct acpi_init_walk_info *)context;
 249         struct acpi_namespace_node *node =
 250             (struct acpi_namespace_node *)obj_handle;
 251         union acpi_operand_object *obj_desc;
 252
 253         ACPI_FUNCTION_NAME(ns_init_one_object);
 254
 255         info->object_count++;
 256
 257         /* And even then, we are only interested in a few object types */
 258
 259         type = acpi_ns_get_type(obj_handle);
 260         obj_desc = acpi_ns_get_attached_object(node);
 261         if (!obj_desc) {
 262                 return (AE_OK);
 263         }
 264
 265         /* Increment counters for object types we are looking for */
 266
 267         switch (type) {
 268         case ACPI_TYPE_REGION:
 269
 270                 info->op_region_count++;
 271                 break;
 272
 273         case ACPI_TYPE_BUFFER_FIELD:
 274
 275                 info->field_count++;
 276                 break;
 277
 278         case ACPI_TYPE_LOCAL_BANK_FIELD:
 279
 280                 info->field_count++;
 281                 break;
 282
 283         case ACPI_TYPE_BUFFER:
 284
 285                 info->buffer_count++;
 286                 break;
 287
 288         case ACPI_TYPE_PACKAGE:
 289
 290                 info->package_count++;
 291                 break;
 292
 293         default:
 294
 295                 /* No init required, just exit now */
 296
 297                 return (AE_OK);
 298         }
 299
 300         /* If the object is already initialized, nothing else to do */
 301
 302         if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
 303                 return (AE_OK);
 304         }
 305
 306         /* Must lock the interpreter before executing AML code */
 307
 308         acpi_ex_enter_interpreter();
 309
 310         /*
 311          * Each of these types can contain executable AML code within the
 312          * declaration.
 313          */
 314         switch (type) {
 315         case ACPI_TYPE_REGION:
 316
 317                 info->op_region_init++;
 318                 status = acpi_ds_get_region_arguments(obj_desc);
 319                 break;
 320
 321         case ACPI_TYPE_BUFFER_FIELD:
 322
 323                 info->field_init++;
 324                 status = acpi_ds_get_buffer_field_arguments(obj_desc);
 325                 break;
 326
 327         case ACPI_TYPE_LOCAL_BANK_FIELD:
 328
 329                 info->field_init++;
 330                 status = acpi_ds_get_bank_field_arguments(obj_desc);
 331                 break;
 332
 333         case ACPI_TYPE_BUFFER:
 334
 335                 info->buffer_init++;
 336                 status = acpi_ds_get_buffer_arguments(obj_desc);
 337                 break;
 338
 339         case ACPI_TYPE_PACKAGE:
 340
 341                 info->package_init++;
 342                 status = acpi_ds_get_package_arguments(obj_desc);
 343                 break;
 344
 345         default:
 346
 347                 /* No other types can get here */
 348
 349                 break;
 350         }
 351
 352         if (ACPI_FAILURE(status)) {
 353                 ACPI_EXCEPTION((AE_INFO, status,
 354                                 "Could not execute arguments for [%4.4s] (%s)",
 355                                 acpi_ut_get_node_name(node),
 356                                 acpi_ut_get_type_name(type)));
 357         }
 358
 359         /*
 360          * We ignore errors from above, and always return OK, since we don't want
 361          * to abort the walk on any single error.
 362          */
 363         acpi_ex_exit_interpreter();
 364         return (AE_OK);
 365 }
 366
 367 /*******************************************************************************
 368  *
 369  * FUNCTION:    acpi_ns_find_ini_methods
 370  *
 371  * PARAMETERS:  acpi_walk_callback
 372  *
 373  * RETURN:      acpi_status
 374  *
 375  * DESCRIPTION: Called during namespace walk. Finds objects named _INI under
 376  *              device/processor/thermal objects, and marks the entire subtree
 377  *              with a SUBTREE_HAS_INI flag. This flag is used during the
 378  *              subsequent device initialization walk to avoid entire subtrees
 379  *              that do not contain an _INI.
 380  *
 381  ******************************************************************************/
 382
 383 static acpi_status
 384 acpi_ns_find_ini_methods(acpi_handle obj_handle,
 385                          u32 nesting_level, void *context, void **return_value)
 386 {
 387         struct acpi_device_walk_info *info =
 388             ACPI_CAST_PTR(struct acpi_device_walk_info, context);
 389         struct acpi_namespace_node *node;
 390         struct acpi_namespace_node *parent_node;
 391
 392         /* Keep count of device/processor/thermal objects */
 393
 394         node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
 395         if ((node->type == ACPI_TYPE_DEVICE) ||
 396             (node->type == ACPI_TYPE_PROCESSOR) ||
 397             (node->type == ACPI_TYPE_THERMAL)) {
 398                 info->device_count++;
 399                 return (AE_OK);
 400         }
 401
 402         /* We are only looking for methods named _INI */
 403
 404         if (!ACPI_COMPARE_NAME(node->name.ascii, METHOD_NAME__INI)) {
 405                 return (AE_OK);
 406         }
 407
 408         /*
 409          * The only _INI methods that we care about are those that are
 410          * present under Device, Processor, and Thermal objects.
 411          */
 412         parent_node = node->parent;
 413         switch (parent_node->type) {
 414         case ACPI_TYPE_DEVICE:
 415         case ACPI_TYPE_PROCESSOR:
 416         case ACPI_TYPE_THERMAL:
 417
 418                 /* Mark parent and bubble up the INI present flag to the root */
 419
 420                 while (parent_node) {
 421                         parent_node->flags |= ANOBJ_SUBTREE_HAS_INI;
 422                         parent_node = parent_node->parent;
 423                 }
 424                 break;
 425
 426         default:
 427
 428                 break;
 429         }
 430
 431         return (AE_OK);
 432 }
 433
 434 /*******************************************************************************
 435  *
 436  * FUNCTION:    acpi_ns_init_one_device
 437  *
 438  * PARAMETERS:  acpi_walk_callback
 439  *
 440  * RETURN:      acpi_status
 441  *
 442  * DESCRIPTION: This is called once per device soon after ACPI is enabled
 443  *              to initialize each device. It determines if the device is
 444  *              present, and if so, calls _INI.
 445  *
 446  ******************************************************************************/
 447
 448 static acpi_status
 449 acpi_ns_init_one_device(acpi_handle obj_handle,
 450                         u32 nesting_level, void *context, void **return_value)
 451 {
 452         struct acpi_device_walk_info *walk_info =
 453             ACPI_CAST_PTR(struct acpi_device_walk_info, context);
 454         struct acpi_evaluate_info *info = walk_info->evaluate_info;
 455         u32 flags;
 456         acpi_status status;
 457         struct acpi_namespace_node *device_node;
 458
 459         ACPI_FUNCTION_TRACE(ns_init_one_device);
 460
 461         /* We are interested in Devices, Processors and thermal_zones only */
 462
 463         device_node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
 464         if ((device_node->type != ACPI_TYPE_DEVICE) &&
 465             (device_node->type != ACPI_TYPE_PROCESSOR) &&
 466             (device_node->type != ACPI_TYPE_THERMAL)) {
 467                 return_ACPI_STATUS(AE_OK);
 468         }
 469
 470         /*
 471          * Because of an earlier namespace analysis, all subtrees that contain an
 472          * _INI method are tagged.
 473          *
 474          * If this device subtree does not contain any _INI methods, we
 475          * can exit now and stop traversing this entire subtree.
 476          */
 477         if (!(device_node->flags & ANOBJ_SUBTREE_HAS_INI)) {
 478                 return_ACPI_STATUS(AE_CTRL_DEPTH);
 479         }
 480
 481         /*
 482          * Run _STA to determine if this device is present and functioning. We
 483          * must know this information for two important reasons (from ACPI spec):
 484          *
 485          * 1) We can only run _INI if the device is present.
 486          * 2) We must abort the device tree walk on this subtree if the device is
 487          *    not present and is not functional (we will not examine the children)
 488          *
 489          * The _STA method is not required to be present under the device, we
 490          * assume the device is present if _STA does not exist.
 491          */
 492         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 493                         (ACPI_TYPE_METHOD, device_node, METHOD_NAME__STA));
 494
 495         status = acpi_ut_execute_STA(device_node, &flags);
 496         if (ACPI_FAILURE(status)) {
 497
 498                 /* Ignore error and move on to next device */
 499
 500                 return_ACPI_STATUS(AE_OK);
 501         }
 502
 503         /*
 504          * Flags == -1 means that _STA was not found. In this case, we assume that
 505          * the device is both present and functional.
 506          *
 507          * From the ACPI spec, description of _STA:
 508          *
 509          * "If a device object (including the processor object) does not have an
 510          * _STA object, then OSPM assumes that all of the above bits are set (in
 511          * other words, the device is present, ..., and functioning)"
 512          */
 513         if (flags != ACPI_UINT32_MAX) {
 514                 walk_info->num_STA++;
 515         }
 516
 517         /*
 518          * Examine the PRESENT and FUNCTIONING status bits
 519          *
 520          * Note: ACPI spec does not seem to specify behavior for the present but
 521          * not functioning case, so we assume functioning if present.
 522          */
 523         if (!(flags & ACPI_STA_DEVICE_PRESENT)) {
 524
 525                 /* Device is not present, we must examine the Functioning bit */
 526
 527                 if (flags & ACPI_STA_DEVICE_FUNCTIONING) {
 528                         /*
 529                          * Device is not present but is "functioning". In this case,
 530                          * we will not run _INI, but we continue to examine the children
 531                          * of this device.
 532                          *
 533                          * From the ACPI spec, description of _STA: (note - no mention
 534                          * of whether to run _INI or not on the device in question)
 535                          *
 536                          * "_STA may return bit 0 clear (not present) with bit 3 set
 537                          * (device is functional). This case is used to indicate a valid
 538                          * device for which no device driver should be loaded (for example,
 539                          * a bridge device.) Children of this device may be present and
 540                          * valid. OSPM should continue enumeration below a device whose
 541                          * _STA returns this bit combination"
 542                          */
 543                         return_ACPI_STATUS(AE_OK);
 544                 } else {
 545                         /*
 546                          * Device is not present and is not functioning. We must abort the
 547                          * walk of this subtree immediately -- don't look at the children
 548                          * of such a device.
 549                          *
 550                          * From the ACPI spec, description of _INI:
 551                          *
 552                          * "If the _STA method indicates that the device is not present,
 553                          * OSPM will not run the _INI and will not examine the children
 554                          * of the device for _INI methods"
 555                          */
 556                         return_ACPI_STATUS(AE_CTRL_DEPTH);
 557                 }
 558         }
 559
 560         /*
 561          * The device is present or is assumed present if no _STA exists.
 562          * Run the _INI if it exists (not required to exist)
 563          *
 564          * Note: We know there is an _INI within this subtree, but it may not be
 565          * under this particular device, it may be lower in the branch.
 566          */
 567         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
 568                         (ACPI_TYPE_METHOD, device_node, METHOD_NAME__INI));
 569
 570         ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info));
 571         info->prefix_node = device_node;
 572         info->relative_pathname = METHOD_NAME__INI;
 573         info->parameters = NULL;
 574         info->flags = ACPI_IGNORE_RETURN_VALUE;
 575
 576         status = acpi_ns_evaluate(info);
 577
 578         if (ACPI_SUCCESS(status)) {
 579                 walk_info->num_INI++;
 580         }
 581 #ifdef ACPI_DEBUG_OUTPUT
 582         else if (status != AE_NOT_FOUND) {
 583
 584                 /* Ignore error and move on to next device */
 585
 586                 char *scope_name = acpi_ns_get_external_pathname(info->node);
 587
 588                 ACPI_EXCEPTION((AE_INFO, status, "during %s._INI execution",
 589                                 scope_name));
 590                 ACPI_FREE(scope_name);
 591         }
 592 #endif
 593
 594         /* Ignore errors from above */
 595
 596         status = AE_OK;
 597
 598         /*
 599          * The _INI method has been run if present; call the Global Initialization
 600          * Handler for this device.
 601          */
 602         if (acpi_gbl_init_handler) {
 603                 status =
 604                     acpi_gbl_init_handler(device_node, ACPI_INIT_DEVICE_INI);
 605         }
 606
 607         return_ACPI_STATUS(status);
 608 }