drivers/acpi/acpica/nsrepair.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nsrepair - Repair for objects returned by predefined methods
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2012, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47 #include "acinterp.h"
  48 #include "acpredef.h"
  49
  50 #define _COMPONENT          ACPI_NAMESPACE
  51 ACPI_MODULE_NAME("nsrepair")
  52
  53 /*******************************************************************************
  54  *
  55  * This module attempts to repair or convert objects returned by the
  56  * predefined methods to an object type that is expected, as per the ACPI
  57  * specification. The need for this code is dictated by the many machines that
  58  * return incorrect types for the standard predefined methods. Performing these
  59  * conversions here, in one place, eliminates the need for individual ACPI
  60  * device drivers to do the same. Note: Most of these conversions are different
  61  * than the internal object conversion routines used for implicit object
  62  * conversion.
  63  *
  64  * The following conversions can be performed as necessary:
  65  *
  66  * Integer -> String
  67  * Integer -> Buffer
  68  * String  -> Integer
  69  * String  -> Buffer
  70  * Buffer  -> Integer
  71  * Buffer  -> String
  72  * Buffer  -> Package of Integers
  73  * Package -> Package of one Package
  74  * An incorrect standalone object is wrapped with required outer package
  75  *
  76  * Additional possible repairs:
  77  * Required package elements that are NULL replaced by Integer/String/Buffer
  78  *
  79  ******************************************************************************/
  80 /* Local prototypes */
  81 static acpi_status
  82 acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
  83                            union acpi_operand_object **return_object);
  84
  85 static acpi_status
  86 acpi_ns_convert_to_string(union acpi_operand_object *original_object,
  87                           union acpi_operand_object **return_object);
  88
  89 static acpi_status
  90 acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
  91                           union acpi_operand_object **return_object);
  92
  93 /*******************************************************************************
  94  *
  95  * FUNCTION:    acpi_ns_repair_object
  96  *
  97  * PARAMETERS:  data                - Pointer to validation data structure
  98  *              expected_btypes     - Object types expected
  99  *              package_index       - Index of object within parent package (if
 100  *                                    applicable - ACPI_NOT_PACKAGE_ELEMENT
 101  *                                    otherwise)
 102  *              return_object_ptr   - Pointer to the object returned from the
 103  *                                    evaluation of a method or object
 104  *
 105  * RETURN:      Status. AE_OK if repair was successful.
 106  *
 107  * DESCRIPTION: Attempt to repair/convert a return object of a type that was
 108  *              not expected.
 109  *
 110  ******************************************************************************/
 111
 112 acpi_status
 113 acpi_ns_repair_object(struct acpi_predefined_data *data,
 114                       u32 expected_btypes,
 115                       u32 package_index,
 116                       union acpi_operand_object **return_object_ptr)
 117 {
 118         union acpi_operand_object *return_object = *return_object_ptr;
 119         union acpi_operand_object *new_object;
 120         acpi_status status;
 121
 122         ACPI_FUNCTION_NAME(ns_repair_object);
 123
 124         /*
 125          * At this point, we know that the type of the returned object was not
 126          * one of the expected types for this predefined name. Attempt to
 127          * repair the object by converting it to one of the expected object
 128          * types for this predefined name.
 129          */
 130         if (expected_btypes & ACPI_RTYPE_INTEGER) {
 131                 status = acpi_ns_convert_to_integer(return_object, &new_object);
 132                 if (ACPI_SUCCESS(status)) {
 133                         goto object_repaired;
 134                 }
 135         }
 136         if (expected_btypes & ACPI_RTYPE_STRING) {
 137                 status = acpi_ns_convert_to_string(return_object, &new_object);
 138                 if (ACPI_SUCCESS(status)) {
 139                         goto object_repaired;
 140                 }
 141         }
 142         if (expected_btypes & ACPI_RTYPE_BUFFER) {
 143                 status = acpi_ns_convert_to_buffer(return_object, &new_object);
 144                 if (ACPI_SUCCESS(status)) {
 145                         goto object_repaired;
 146                 }
 147         }
 148         if (expected_btypes & ACPI_RTYPE_PACKAGE) {
 149                 /*
 150                  * A package is expected. We will wrap the existing object with a
 151                  * new package object. It is often the case that if a variable-length
 152                  * package is required, but there is only a single object needed, the
 153                  * BIOS will return that object instead of wrapping it with a Package
 154                  * object. Note: after the wrapping, the package will be validated
 155                  * for correct contents (expected object type or types).
 156                  */
 157                 status =
 158                     acpi_ns_wrap_with_package(data, return_object, &new_object);
 159                 if (ACPI_SUCCESS(status)) {
 160                         /*
 161                          * The original object just had its reference count
 162                          * incremented for being inserted into the new package.
 163                          */
 164                         *return_object_ptr = new_object;        /* New Package object */
 165                         data->flags |= ACPI_OBJECT_REPAIRED;
 166                         return (AE_OK);
 167                 }
 168         }
 169
 170         /* We cannot repair this object */
 171
 172         return (AE_AML_OPERAND_TYPE);
 173
 174       object_repaired:
 175
 176         /* Object was successfully repaired */
 177
 178         if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
 179                 /*
 180                  * The original object is a package element. We need to
 181                  * decrement the reference count of the original object,
 182                  * for removing it from the package.
 183                  *
 184                  * However, if the original object was just wrapped with a
 185                  * package object as part of the repair, we don't need to
 186                  * change the reference count.
 187                  */
 188                 if (!(data->flags & ACPI_OBJECT_WRAPPED)) {
 189                         new_object->common.reference_count =
 190                             return_object->common.reference_count;
 191
 192                         if (return_object->common.reference_count > 1) {
 193                                 return_object->common.reference_count--;
 194                         }
 195                 }
 196
 197                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 198                                   "%s: Converted %s to expected %s at Package index %u\n",
 199                                   data->pathname,
 200                                   acpi_ut_get_object_type_name(return_object),
 201                                   acpi_ut_get_object_type_name(new_object),
 202                                   package_index));
 203         } else {
 204                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 205                                   "%s: Converted %s to expected %s\n",
 206                                   data->pathname,
 207                                   acpi_ut_get_object_type_name(return_object),
 208                                   acpi_ut_get_object_type_name(new_object)));
 209         }
 210
 211         /* Delete old object, install the new return object */
 212
 213         acpi_ut_remove_reference(return_object);
 214         *return_object_ptr = new_object;
 215         data->flags |= ACPI_OBJECT_REPAIRED;
 216         return (AE_OK);
 217 }
 218
 219 /*******************************************************************************
 220  *
 221  * FUNCTION:    acpi_ns_convert_to_integer
 222  *
 223  * PARAMETERS:  original_object     - Object to be converted
 224  *              return_object       - Where the new converted object is returned
 225  *
 226  * RETURN:      Status. AE_OK if conversion was successful.
 227  *
 228  * DESCRIPTION: Attempt to convert a String/Buffer object to an Integer.
 229  *
 230  ******************************************************************************/
 231
 232 static acpi_status
 233 acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
 234                            union acpi_operand_object **return_object)
 235 {
 236         union acpi_operand_object *new_object;
 237         acpi_status status;
 238         u64 value = 0;
 239         u32 i;
 240
 241         switch (original_object->common.type) {
 242         case ACPI_TYPE_STRING:
 243
 244                 /* String-to-Integer conversion */
 245
 246                 status = acpi_ut_strtoul64(original_object->string.pointer,
 247                                            ACPI_ANY_BASE, &value);
 248                 if (ACPI_FAILURE(status)) {
 249                         return (status);
 250                 }
 251                 break;
 252
 253         case ACPI_TYPE_BUFFER:
 254
 255                 /* Buffer-to-Integer conversion. Max buffer size is 64 bits. */
 256
 257                 if (original_object->buffer.length > 8) {
 258                         return (AE_AML_OPERAND_TYPE);
 259                 }
 260
 261                 /* Extract each buffer byte to create the integer */
 262
 263                 for (i = 0; i < original_object->buffer.length; i++) {
 264                         value |=
 265                             ((u64) original_object->buffer.
 266                              pointer[i] << (i * 8));
 267                 }
 268                 break;
 269
 270         default:
 271                 return (AE_AML_OPERAND_TYPE);
 272         }
 273
 274         new_object = acpi_ut_create_integer_object(value);
 275         if (!new_object) {
 276                 return (AE_NO_MEMORY);
 277         }
 278
 279         *return_object = new_object;
 280         return (AE_OK);
 281 }
 282
 283 /*******************************************************************************
 284  *
 285  * FUNCTION:    acpi_ns_convert_to_string
 286  *
 287  * PARAMETERS:  original_object     - Object to be converted
 288  *              return_object       - Where the new converted object is returned
 289  *
 290  * RETURN:      Status. AE_OK if conversion was successful.
 291  *
 292  * DESCRIPTION: Attempt to convert a Integer/Buffer object to a String.
 293  *
 294  ******************************************************************************/
 295
 296 static acpi_status
 297 acpi_ns_convert_to_string(union acpi_operand_object *original_object,
 298                           union acpi_operand_object **return_object)
 299 {
 300         union acpi_operand_object *new_object;
 301         acpi_size length;
 302         acpi_status status;
 303
 304         switch (original_object->common.type) {
 305         case ACPI_TYPE_INTEGER:
 306                 /*
 307                  * Integer-to-String conversion. Commonly, convert
 308                  * an integer of value 0 to a NULL string. The last element of
 309                  * _BIF and _BIX packages occasionally need this fix.
 310                  */
 311                 if (original_object->integer.value == 0) {
 312
 313                         /* Allocate a new NULL string object */
 314
 315                         new_object = acpi_ut_create_string_object(0);
 316                         if (!new_object) {
 317                                 return (AE_NO_MEMORY);
 318                         }
 319                 } else {
 320                         status =
 321                             acpi_ex_convert_to_string(original_object,
 322                                                       &new_object,
 323                                                       ACPI_IMPLICIT_CONVERT_HEX);
 324                         if (ACPI_FAILURE(status)) {
 325                                 return (status);
 326                         }
 327                 }
 328                 break;
 329
 330         case ACPI_TYPE_BUFFER:
 331                 /*
 332                  * Buffer-to-String conversion. Use a to_string
 333                  * conversion, no transform performed on the buffer data. The best
 334                  * example of this is the _BIF method, where the string data from
 335                  * the battery is often (incorrectly) returned as buffer object(s).
 336                  */
 337                 length = 0;
 338                 while ((length < original_object->buffer.length) &&
 339                        (original_object->buffer.pointer[length])) {
 340                         length++;
 341                 }
 342
 343                 /* Allocate a new string object */
 344
 345                 new_object = acpi_ut_create_string_object(length);
 346                 if (!new_object) {
 347                         return (AE_NO_MEMORY);
 348                 }
 349
 350                 /*
 351                  * Copy the raw buffer data with no transform. String is already NULL
 352                  * terminated at Length+1.
 353                  */
 354                 ACPI_MEMCPY(new_object->string.pointer,
 355                             original_object->buffer.pointer, length);
 356                 break;
 357
 358         default:
 359                 return (AE_AML_OPERAND_TYPE);
 360         }
 361
 362         *return_object = new_object;
 363         return (AE_OK);
 364 }
 365
 366 /*******************************************************************************
 367  *
 368  * FUNCTION:    acpi_ns_convert_to_buffer
 369  *
 370  * PARAMETERS:  original_object     - Object to be converted
 371  *              return_object       - Where the new converted object is returned
 372  *
 373  * RETURN:      Status. AE_OK if conversion was successful.
 374  *
 375  * DESCRIPTION: Attempt to convert a Integer/String/Package object to a Buffer.
 376  *
 377  ******************************************************************************/
 378
 379 static acpi_status
 380 acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
 381                           union acpi_operand_object **return_object)
 382 {
 383         union acpi_operand_object *new_object;
 384         acpi_status status;
 385         union acpi_operand_object **elements;
 386         u32 *dword_buffer;
 387         u32 count;
 388         u32 i;
 389
 390         switch (original_object->common.type) {
 391         case ACPI_TYPE_INTEGER:
 392                 /*
 393                  * Integer-to-Buffer conversion.
 394                  * Convert the Integer to a packed-byte buffer. _MAT and other
 395                  * objects need this sometimes, if a read has been performed on a
 396                  * Field object that is less than or equal to the global integer
 397                  * size (32 or 64 bits).
 398                  */
 399                 status =
 400                     acpi_ex_convert_to_buffer(original_object, &new_object);
 401                 if (ACPI_FAILURE(status)) {
 402                         return (status);
 403                 }
 404                 break;
 405
 406         case ACPI_TYPE_STRING:
 407
 408                 /* String-to-Buffer conversion. Simple data copy */
 409
 410                 new_object =
 411                     acpi_ut_create_buffer_object(original_object->string.
 412                                                  length);
 413                 if (!new_object) {
 414                         return (AE_NO_MEMORY);
 415                 }
 416
 417                 ACPI_MEMCPY(new_object->buffer.pointer,
 418                             original_object->string.pointer,
 419                             original_object->string.length);
 420                 break;
 421
 422         case ACPI_TYPE_PACKAGE:
 423                 /*
 424                  * This case is often seen for predefined names that must return a
 425                  * Buffer object with multiple DWORD integers within. For example,
 426                  * _FDE and _GTM. The Package can be converted to a Buffer.
 427                  */
 428
 429                 /* All elements of the Package must be integers */
 430
 431                 elements = original_object->package.elements;
 432                 count = original_object->package.count;
 433
 434                 for (i = 0; i < count; i++) {
 435                         if ((!*elements) ||
 436                             ((*elements)->common.type != ACPI_TYPE_INTEGER)) {
 437                                 return (AE_AML_OPERAND_TYPE);
 438                         }
 439                         elements++;
 440                 }
 441
 442                 /* Create the new buffer object to replace the Package */
 443
 444                 new_object = acpi_ut_create_buffer_object(ACPI_MUL_4(count));
 445                 if (!new_object) {
 446                         return (AE_NO_MEMORY);
 447                 }
 448
 449                 /* Copy the package elements (integers) to the buffer as DWORDs */
 450
 451                 elements = original_object->package.elements;
 452                 dword_buffer = ACPI_CAST_PTR(u32, new_object->buffer.pointer);
 453
 454                 for (i = 0; i < count; i++) {
 455                         *dword_buffer = (u32) (*elements)->integer.value;
 456                         dword_buffer++;
 457                         elements++;
 458                 }
 459                 break;
 460
 461         default:
 462                 return (AE_AML_OPERAND_TYPE);
 463         }
 464
 465         *return_object = new_object;
 466         return (AE_OK);
 467 }
 468
 469 /*******************************************************************************
 470  *
 471  * FUNCTION:    acpi_ns_repair_null_element
 472  *
 473  * PARAMETERS:  data                - Pointer to validation data structure
 474  *              expected_btypes     - Object types expected
 475  *              package_index       - Index of object within parent package (if
 476  *                                    applicable - ACPI_NOT_PACKAGE_ELEMENT
 477  *                                    otherwise)
 478  *              return_object_ptr   - Pointer to the object returned from the
 479  *                                    evaluation of a method or object
 480  *
 481  * RETURN:      Status. AE_OK if repair was successful.
 482  *
 483  * DESCRIPTION: Attempt to repair a NULL element of a returned Package object.
 484  *
 485  ******************************************************************************/
 486
 487 acpi_status
 488 acpi_ns_repair_null_element(struct acpi_predefined_data *data,
 489                             u32 expected_btypes,
 490                             u32 package_index,
 491                             union acpi_operand_object **return_object_ptr)
 492 {
 493         union acpi_operand_object *return_object = *return_object_ptr;
 494         union acpi_operand_object *new_object;
 495
 496         ACPI_FUNCTION_NAME(ns_repair_null_element);
 497
 498         /* No repair needed if return object is non-NULL */
 499
 500         if (return_object) {
 501                 return (AE_OK);
 502         }
 503
 504         /*
 505          * Attempt to repair a NULL element of a Package object. This applies to
 506          * predefined names that return a fixed-length package and each element
 507          * is required. It does not apply to variable-length packages where NULL
 508          * elements are allowed, especially at the end of the package.
 509          */
 510         if (expected_btypes & ACPI_RTYPE_INTEGER) {
 511
 512                 /* Need an integer - create a zero-value integer */
 513
 514                 new_object = acpi_ut_create_integer_object((u64)0);
 515         } else if (expected_btypes & ACPI_RTYPE_STRING) {
 516
 517                 /* Need a string - create a NULL string */
 518
 519                 new_object = acpi_ut_create_string_object(0);
 520         } else if (expected_btypes & ACPI_RTYPE_BUFFER) {
 521
 522                 /* Need a buffer - create a zero-length buffer */
 523
 524                 new_object = acpi_ut_create_buffer_object(0);
 525         } else {
 526                 /* Error for all other expected types */
 527
 528                 return (AE_AML_OPERAND_TYPE);
 529         }
 530
 531         if (!new_object) {
 532                 return (AE_NO_MEMORY);
 533         }
 534
 535         /* Set the reference count according to the parent Package object */
 536
 537         new_object->common.reference_count =
 538             data->parent_package->common.reference_count;
 539
 540         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 541                           "%s: Converted NULL package element to expected %s at index %u\n",
 542                           data->pathname,
 543                           acpi_ut_get_object_type_name(new_object),
 544                           package_index));
 545
 546         *return_object_ptr = new_object;
 547         data->flags |= ACPI_OBJECT_REPAIRED;
 548         return (AE_OK);
 549 }
 550
 551 /******************************************************************************
 552  *
 553  * FUNCTION:    acpi_ns_remove_null_elements
 554  *
 555  * PARAMETERS:  data                - Pointer to validation data structure
 556  *              package_type        - An acpi_return_package_types value
 557  *              obj_desc            - A Package object
 558  *
 559  * RETURN:      None.
 560  *
 561  * DESCRIPTION: Remove all NULL package elements from packages that contain
 562  *              a variable number of sub-packages. For these types of
 563  *              packages, NULL elements can be safely removed.
 564  *
 565  *****************************************************************************/
 566
 567 void
 568 acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
 569                              u8 package_type,
 570                              union acpi_operand_object *obj_desc)
 571 {
 572         union acpi_operand_object **source;
 573         union acpi_operand_object **dest;
 574         u32 count;
 575         u32 new_count;
 576         u32 i;
 577
 578         ACPI_FUNCTION_NAME(ns_remove_null_elements);
 579
 580         /*
 581          * We can safely remove all NULL elements from these package types:
 582          * PTYPE1_VAR packages contain a variable number of simple data types.
 583          * PTYPE2 packages contain a variable number of sub-packages.
 584          */
 585         switch (package_type) {
 586         case ACPI_PTYPE1_VAR:
 587         case ACPI_PTYPE2:
 588         case ACPI_PTYPE2_COUNT:
 589         case ACPI_PTYPE2_PKG_COUNT:
 590         case ACPI_PTYPE2_FIXED:
 591         case ACPI_PTYPE2_MIN:
 592         case ACPI_PTYPE2_REV_FIXED:
 593         case ACPI_PTYPE2_FIX_VAR:
 594                 break;
 595
 596         default:
 597         case ACPI_PTYPE1_FIXED:
 598         case ACPI_PTYPE1_OPTION:
 599                 return;
 600         }
 601
 602         count = obj_desc->package.count;
 603         new_count = count;
 604
 605         source = obj_desc->package.elements;
 606         dest = source;
 607
 608         /* Examine all elements of the package object, remove nulls */
 609
 610         for (i = 0; i < count; i++) {
 611                 if (!*source) {
 612                         new_count--;
 613                 } else {
 614                         *dest = *source;
 615                         dest++;
 616                 }
 617                 source++;
 618         }
 619
 620         /* Update parent package if any null elements were removed */
 621
 622         if (new_count < count) {
 623                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 624                                   "%s: Found and removed %u NULL elements\n",
 625                                   data->pathname, (count - new_count)));
 626
 627                 /* NULL terminate list and update the package count */
 628
 629                 *dest = NULL;
 630                 obj_desc->package.count = new_count;
 631         }
 632 }
 633
 634 /*******************************************************************************
 635  *
 636  * FUNCTION:    acpi_ns_wrap_with_package
 637  *
 638  * PARAMETERS:  data                - Pointer to validation data structure
 639  *              original_object     - Pointer to the object to repair.
 640  *              obj_desc_ptr        - The new package object is returned here
 641  *
 642  * RETURN:      Status, new object in *obj_desc_ptr
 643  *
 644  * DESCRIPTION: Repair a common problem with objects that are defined to
 645  *              return a variable-length Package of sub-objects. If there is
 646  *              only one sub-object, some BIOS code mistakenly simply declares
 647  *              the single object instead of a Package with one sub-object.
 648  *              This function attempts to repair this error by wrapping a
 649  *              Package object around the original object, creating the
 650  *              correct and expected Package with one sub-object.
 651  *
 652  *              Names that can be repaired in this manner include:
 653  *              _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS,
 654  *              _BCL, _DOD, _FIX, _Sx
 655  *
 656  ******************************************************************************/
 657
 658 acpi_status
 659 acpi_ns_wrap_with_package(struct acpi_predefined_data *data,
 660                           union acpi_operand_object *original_object,
 661                           union acpi_operand_object **obj_desc_ptr)
 662 {
 663         union acpi_operand_object *pkg_obj_desc;
 664
 665         ACPI_FUNCTION_NAME(ns_wrap_with_package);
 666
 667         /*
 668          * Create the new outer package and populate it. The new package will
 669          * have a single element, the lone sub-object.
 670          */
 671         pkg_obj_desc = acpi_ut_create_package_object(1);
 672         if (!pkg_obj_desc) {
 673                 return (AE_NO_MEMORY);
 674         }
 675
 676         pkg_obj_desc->package.elements[0] = original_object;
 677
 678         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 679                           "%s: Wrapped %s with expected Package object\n",
 680                           data->pathname,
 681                           acpi_ut_get_object_type_name(original_object)));
 682
 683         /* Return the new object in the object pointer */
 684
 685         *obj_desc_ptr = pkg_obj_desc;
 686         data->flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED;
 687         return (AE_OK);
 688 }