ACPICA: Clarify ACPI_FREE_BUFFER usage.
[deliverable/linux.git] / drivers / acpi / acpica / psparse.c
1 /******************************************************************************
2 *
3 * Module Name: psparse - Parser top level AML parse routines
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2013, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 /*
45 * Parse the AML and build an operation tree as most interpreters,
46 * like Perl, do. Parsing is done by hand rather than with a YACC
47 * generated parser to tightly constrain stack and dynamic memory
48 * usage. At the same time, parsing is kept flexible and the code
49 * fairly compact by parsing based on a list of AML opcode
50 * templates in aml_op_info[]
51 */
52
53 #include <acpi/acpi.h>
54 #include "accommon.h"
55 #include "acparser.h"
56 #include "acdispat.h"
57 #include "amlcode.h"
58 #include "acinterp.h"
59
60 #define _COMPONENT ACPI_PARSER
61 ACPI_MODULE_NAME("psparse")
62
63 /*******************************************************************************
64 *
65 * FUNCTION: acpi_ps_get_opcode_size
66 *
67 * PARAMETERS: opcode - An AML opcode
68 *
69 * RETURN: Size of the opcode, in bytes (1 or 2)
70 *
71 * DESCRIPTION: Get the size of the current opcode.
72 *
73 ******************************************************************************/
74 u32 acpi_ps_get_opcode_size(u32 opcode)
75 {
76
77 /* Extended (2-byte) opcode if > 255 */
78
79 if (opcode > 0x00FF) {
80 return (2);
81 }
82
83 /* Otherwise, just a single byte opcode */
84
85 return (1);
86 }
87
88 /*******************************************************************************
89 *
90 * FUNCTION: acpi_ps_peek_opcode
91 *
92 * PARAMETERS: parser_state - A parser state object
93 *
94 * RETURN: Next AML opcode
95 *
96 * DESCRIPTION: Get next AML opcode (without incrementing AML pointer)
97 *
98 ******************************************************************************/
99
100 u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state)
101 {
102 u8 *aml;
103 u16 opcode;
104
105 aml = parser_state->aml;
106 opcode = (u16) ACPI_GET8(aml);
107
108 if (opcode == AML_EXTENDED_OP_PREFIX) {
109
110 /* Extended opcode, get the second opcode byte */
111
112 aml++;
113 opcode = (u16) ((opcode << 8) | ACPI_GET8(aml));
114 }
115
116 return (opcode);
117 }
118
119 /*******************************************************************************
120 *
121 * FUNCTION: acpi_ps_complete_this_op
122 *
123 * PARAMETERS: walk_state - Current State
124 * op - Op to complete
125 *
126 * RETURN: Status
127 *
128 * DESCRIPTION: Perform any cleanup at the completion of an Op.
129 *
130 ******************************************************************************/
131
132 acpi_status
133 acpi_ps_complete_this_op(struct acpi_walk_state * walk_state,
134 union acpi_parse_object * op)
135 {
136 union acpi_parse_object *prev;
137 union acpi_parse_object *next;
138 const struct acpi_opcode_info *parent_info;
139 union acpi_parse_object *replacement_op = NULL;
140 acpi_status status = AE_OK;
141
142 ACPI_FUNCTION_TRACE_PTR(ps_complete_this_op, op);
143
144 /* Check for null Op, can happen if AML code is corrupt */
145
146 if (!op) {
147 return_ACPI_STATUS(AE_OK); /* OK for now */
148 }
149
150 /* Delete this op and the subtree below it if asked to */
151
152 if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) !=
153 ACPI_PARSE_DELETE_TREE)
154 || (walk_state->op_info->class == AML_CLASS_ARGUMENT)) {
155 return_ACPI_STATUS(AE_OK);
156 }
157
158 /* Make sure that we only delete this subtree */
159
160 if (op->common.parent) {
161 prev = op->common.parent->common.value.arg;
162 if (!prev) {
163
164 /* Nothing more to do */
165
166 goto cleanup;
167 }
168
169 /*
170 * Check if we need to replace the operator and its subtree
171 * with a return value op (placeholder op)
172 */
173 parent_info =
174 acpi_ps_get_opcode_info(op->common.parent->common.
175 aml_opcode);
176
177 switch (parent_info->class) {
178 case AML_CLASS_CONTROL:
179
180 break;
181
182 case AML_CLASS_CREATE:
183 /*
184 * These opcodes contain term_arg operands. The current
185 * op must be replaced by a placeholder return op
186 */
187 replacement_op =
188 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
189 if (!replacement_op) {
190 status = AE_NO_MEMORY;
191 }
192 break;
193
194 case AML_CLASS_NAMED_OBJECT:
195 /*
196 * These opcodes contain term_arg operands. The current
197 * op must be replaced by a placeholder return op
198 */
199 if ((op->common.parent->common.aml_opcode ==
200 AML_REGION_OP)
201 || (op->common.parent->common.aml_opcode ==
202 AML_DATA_REGION_OP)
203 || (op->common.parent->common.aml_opcode ==
204 AML_BUFFER_OP)
205 || (op->common.parent->common.aml_opcode ==
206 AML_PACKAGE_OP)
207 || (op->common.parent->common.aml_opcode ==
208 AML_BANK_FIELD_OP)
209 || (op->common.parent->common.aml_opcode ==
210 AML_VAR_PACKAGE_OP)) {
211 replacement_op =
212 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
213 if (!replacement_op) {
214 status = AE_NO_MEMORY;
215 }
216 } else
217 if ((op->common.parent->common.aml_opcode ==
218 AML_NAME_OP)
219 && (walk_state->pass_number <=
220 ACPI_IMODE_LOAD_PASS2)) {
221 if ((op->common.aml_opcode == AML_BUFFER_OP)
222 || (op->common.aml_opcode == AML_PACKAGE_OP)
223 || (op->common.aml_opcode ==
224 AML_VAR_PACKAGE_OP)) {
225 replacement_op =
226 acpi_ps_alloc_op(op->common.
227 aml_opcode);
228 if (!replacement_op) {
229 status = AE_NO_MEMORY;
230 } else {
231 replacement_op->named.data =
232 op->named.data;
233 replacement_op->named.length =
234 op->named.length;
235 }
236 }
237 }
238 break;
239
240 default:
241
242 replacement_op =
243 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP);
244 if (!replacement_op) {
245 status = AE_NO_MEMORY;
246 }
247 }
248
249 /* We must unlink this op from the parent tree */
250
251 if (prev == op) {
252
253 /* This op is the first in the list */
254
255 if (replacement_op) {
256 replacement_op->common.parent =
257 op->common.parent;
258 replacement_op->common.value.arg = NULL;
259 replacement_op->common.node = op->common.node;
260 op->common.parent->common.value.arg =
261 replacement_op;
262 replacement_op->common.next = op->common.next;
263 } else {
264 op->common.parent->common.value.arg =
265 op->common.next;
266 }
267 }
268
269 /* Search the parent list */
270
271 else
272 while (prev) {
273
274 /* Traverse all siblings in the parent's argument list */
275
276 next = prev->common.next;
277 if (next == op) {
278 if (replacement_op) {
279 replacement_op->common.parent =
280 op->common.parent;
281 replacement_op->common.value.
282 arg = NULL;
283 replacement_op->common.node =
284 op->common.node;
285 prev->common.next =
286 replacement_op;
287 replacement_op->common.next =
288 op->common.next;
289 next = NULL;
290 } else {
291 prev->common.next =
292 op->common.next;
293 next = NULL;
294 }
295 }
296 prev = next;
297 }
298 }
299
300 cleanup:
301
302 /* Now we can actually delete the subtree rooted at Op */
303
304 acpi_ps_delete_parse_tree(op);
305 return_ACPI_STATUS(status);
306 }
307
308 /*******************************************************************************
309 *
310 * FUNCTION: acpi_ps_next_parse_state
311 *
312 * PARAMETERS: walk_state - Current state
313 * op - Current parse op
314 * callback_status - Status from previous operation
315 *
316 * RETURN: Status
317 *
318 * DESCRIPTION: Update the parser state based upon the return exception from
319 * the parser callback.
320 *
321 ******************************************************************************/
322
323 acpi_status
324 acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
325 union acpi_parse_object *op,
326 acpi_status callback_status)
327 {
328 struct acpi_parse_state *parser_state = &walk_state->parser_state;
329 acpi_status status = AE_CTRL_PENDING;
330
331 ACPI_FUNCTION_TRACE_PTR(ps_next_parse_state, op);
332
333 switch (callback_status) {
334 case AE_CTRL_TERMINATE:
335 /*
336 * A control method was terminated via a RETURN statement.
337 * The walk of this method is complete.
338 */
339 parser_state->aml = parser_state->aml_end;
340 status = AE_CTRL_TERMINATE;
341 break;
342
343 case AE_CTRL_BREAK:
344
345 parser_state->aml = walk_state->aml_last_while;
346 walk_state->control_state->common.value = FALSE;
347 status = AE_CTRL_BREAK;
348 break;
349
350 case AE_CTRL_CONTINUE:
351
352 parser_state->aml = walk_state->aml_last_while;
353 status = AE_CTRL_CONTINUE;
354 break;
355
356 case AE_CTRL_PENDING:
357
358 parser_state->aml = walk_state->aml_last_while;
359 break;
360
361 #if 0
362 case AE_CTRL_SKIP:
363
364 parser_state->aml = parser_state->scope->parse_scope.pkg_end;
365 status = AE_OK;
366 break;
367 #endif
368
369 case AE_CTRL_TRUE:
370 /*
371 * Predicate of an IF was true, and we are at the matching ELSE.
372 * Just close out this package
373 */
374 parser_state->aml = acpi_ps_get_next_package_end(parser_state);
375 status = AE_CTRL_PENDING;
376 break;
377
378 case AE_CTRL_FALSE:
379 /*
380 * Either an IF/WHILE Predicate was false or we encountered a BREAK
381 * opcode. In both cases, we do not execute the rest of the
382 * package; We simply close out the parent (finishing the walk of
383 * this branch of the tree) and continue execution at the parent
384 * level.
385 */
386 parser_state->aml = parser_state->scope->parse_scope.pkg_end;
387
388 /* In the case of a BREAK, just force a predicate (if any) to FALSE */
389
390 walk_state->control_state->common.value = FALSE;
391 status = AE_CTRL_END;
392 break;
393
394 case AE_CTRL_TRANSFER:
395
396 /* A method call (invocation) -- transfer control */
397
398 status = AE_CTRL_TRANSFER;
399 walk_state->prev_op = op;
400 walk_state->method_call_op = op;
401 walk_state->method_call_node =
402 (op->common.value.arg)->common.node;
403
404 /* Will return value (if any) be used by the caller? */
405
406 walk_state->return_used =
407 acpi_ds_is_result_used(op, walk_state);
408 break;
409
410 default:
411
412 status = callback_status;
413 if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) {
414 status = AE_OK;
415 }
416 break;
417 }
418
419 return_ACPI_STATUS(status);
420 }
421
422 /*******************************************************************************
423 *
424 * FUNCTION: acpi_ps_parse_aml
425 *
426 * PARAMETERS: walk_state - Current state
427 *
428 *
429 * RETURN: Status
430 *
431 * DESCRIPTION: Parse raw AML and return a tree of ops
432 *
433 ******************************************************************************/
434
435 acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
436 {
437 acpi_status status;
438 struct acpi_thread_state *thread;
439 struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list;
440 struct acpi_walk_state *previous_walk_state;
441
442 ACPI_FUNCTION_TRACE(ps_parse_aml);
443
444 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
445 "Entered with WalkState=%p Aml=%p size=%X\n",
446 walk_state, walk_state->parser_state.aml,
447 walk_state->parser_state.aml_size));
448
449 if (!walk_state->parser_state.aml) {
450 return_ACPI_STATUS(AE_NULL_OBJECT);
451 }
452
453 /* Create and initialize a new thread state */
454
455 thread = acpi_ut_create_thread_state();
456 if (!thread) {
457 if (walk_state->method_desc) {
458
459 /* Executing a control method - additional cleanup */
460
461 acpi_ds_terminate_control_method(walk_state->
462 method_desc,
463 walk_state);
464 }
465
466 acpi_ds_delete_walk_state(walk_state);
467 return_ACPI_STATUS(AE_NO_MEMORY);
468 }
469
470 walk_state->thread = thread;
471
472 /*
473 * If executing a method, the starting sync_level is this method's
474 * sync_level
475 */
476 if (walk_state->method_desc) {
477 walk_state->thread->current_sync_level =
478 walk_state->method_desc->method.sync_level;
479 }
480
481 acpi_ds_push_walk_state(walk_state, thread);
482
483 /*
484 * This global allows the AML debugger to get a handle to the currently
485 * executing control method.
486 */
487 acpi_gbl_current_walk_list = thread;
488
489 /*
490 * Execute the walk loop as long as there is a valid Walk State. This
491 * handles nested control method invocations without recursion.
492 */
493 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
494
495 status = AE_OK;
496 while (walk_state) {
497 if (ACPI_SUCCESS(status)) {
498 /*
499 * The parse_loop executes AML until the method terminates
500 * or calls another method.
501 */
502 status = acpi_ps_parse_loop(walk_state);
503 }
504
505 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
506 "Completed one call to walk loop, %s State=%p\n",
507 acpi_format_exception(status), walk_state));
508
509 if (status == AE_CTRL_TRANSFER) {
510 /*
511 * A method call was detected.
512 * Transfer control to the called control method
513 */
514 status =
515 acpi_ds_call_control_method(thread, walk_state,
516 NULL);
517 if (ACPI_FAILURE(status)) {
518 status =
519 acpi_ds_method_error(status, walk_state);
520 }
521
522 /*
523 * If the transfer to the new method method call worked, a new walk
524 * state was created -- get it
525 */
526 walk_state = acpi_ds_get_current_walk_state(thread);
527 continue;
528 } else if (status == AE_CTRL_TERMINATE) {
529 status = AE_OK;
530 } else if ((status != AE_OK) && (walk_state->method_desc)) {
531
532 /* Either the method parse or actual execution failed */
533
534 ACPI_ERROR_METHOD("Method parse/execution failed",
535 walk_state->method_node, NULL,
536 status);
537
538 /* Check for possible multi-thread reentrancy problem */
539
540 if ((status == AE_ALREADY_EXISTS) &&
541 (!(walk_state->method_desc->method.
542 info_flags & ACPI_METHOD_SERIALIZED))) {
543 /*
544 * Method is not serialized and tried to create an object
545 * twice. The probable cause is that the method cannot
546 * handle reentrancy. Mark as "pending serialized" now, and
547 * then mark "serialized" when the last thread exits.
548 */
549 walk_state->method_desc->method.info_flags |=
550 ACPI_METHOD_SERIALIZED_PENDING;
551 }
552 }
553
554 /* We are done with this walk, move on to the parent if any */
555
556 walk_state = acpi_ds_pop_walk_state(thread);
557
558 /* Reset the current scope to the beginning of scope stack */
559
560 acpi_ds_scope_stack_clear(walk_state);
561
562 /*
563 * If we just returned from the execution of a control method or if we
564 * encountered an error during the method parse phase, there's lots of
565 * cleanup to do
566 */
567 if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
568 ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) {
569 acpi_ds_terminate_control_method(walk_state->
570 method_desc,
571 walk_state);
572 }
573
574 /* Delete this walk state and all linked control states */
575
576 acpi_ps_cleanup_scope(&walk_state->parser_state);
577 previous_walk_state = walk_state;
578
579 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
580 "ReturnValue=%p, ImplicitValue=%p State=%p\n",
581 walk_state->return_desc,
582 walk_state->implicit_return_obj, walk_state));
583
584 /* Check if we have restarted a preempted walk */
585
586 walk_state = acpi_ds_get_current_walk_state(thread);
587 if (walk_state) {
588 if (ACPI_SUCCESS(status)) {
589 /*
590 * There is another walk state, restart it.
591 * If the method return value is not used by the parent,
592 * The object is deleted
593 */
594 if (!previous_walk_state->return_desc) {
595 /*
596 * In slack mode execution, if there is no return value
597 * we should implicitly return zero (0) as a default value.
598 */
599 if (acpi_gbl_enable_interpreter_slack &&
600 !previous_walk_state->
601 implicit_return_obj) {
602 previous_walk_state->
603 implicit_return_obj =
604 acpi_ut_create_integer_object
605 ((u64) 0);
606 if (!previous_walk_state->
607 implicit_return_obj) {
608 return_ACPI_STATUS
609 (AE_NO_MEMORY);
610 }
611 }
612
613 /* Restart the calling control method */
614
615 status =
616 acpi_ds_restart_control_method
617 (walk_state,
618 previous_walk_state->
619 implicit_return_obj);
620 } else {
621 /*
622 * We have a valid return value, delete any implicit
623 * return value.
624 */
625 acpi_ds_clear_implicit_return
626 (previous_walk_state);
627
628 status =
629 acpi_ds_restart_control_method
630 (walk_state,
631 previous_walk_state->return_desc);
632 }
633 if (ACPI_SUCCESS(status)) {
634 walk_state->walk_type |=
635 ACPI_WALK_METHOD_RESTART;
636 }
637 } else {
638 /* On error, delete any return object or implicit return */
639
640 acpi_ut_remove_reference(previous_walk_state->
641 return_desc);
642 acpi_ds_clear_implicit_return
643 (previous_walk_state);
644 }
645 }
646
647 /*
648 * Just completed a 1st-level method, save the final internal return
649 * value (if any)
650 */
651 else if (previous_walk_state->caller_return_desc) {
652 if (previous_walk_state->implicit_return_obj) {
653 *(previous_walk_state->caller_return_desc) =
654 previous_walk_state->implicit_return_obj;
655 } else {
656 /* NULL if no return value */
657
658 *(previous_walk_state->caller_return_desc) =
659 previous_walk_state->return_desc;
660 }
661 } else {
662 if (previous_walk_state->return_desc) {
663
664 /* Caller doesn't want it, must delete it */
665
666 acpi_ut_remove_reference(previous_walk_state->
667 return_desc);
668 }
669 if (previous_walk_state->implicit_return_obj) {
670
671 /* Caller doesn't want it, must delete it */
672
673 acpi_ut_remove_reference(previous_walk_state->
674 implicit_return_obj);
675 }
676 }
677
678 acpi_ds_delete_walk_state(previous_walk_state);
679 }
680
681 /* Normal exit */
682
683 acpi_ex_release_all_mutexes(thread);
684 acpi_ut_delete_generic_state(ACPI_CAST_PTR
685 (union acpi_generic_state, thread));
686 acpi_gbl_current_walk_list = prev_walk_list;
687 return_ACPI_STATUS(status);
688 }
This page took 0.048815 seconds and 5 git commands to generate.