Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[deliverable/linux.git] / drivers / acpi / acpica / rscalc.c
1 /*******************************************************************************
2 *
3 * Module Name: rscalc - Calculate stream and list lengths
4 *
5 ******************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2013, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acresrc.h"
47 #include "acnamesp.h"
48
49 #define _COMPONENT ACPI_RESOURCES
50 ACPI_MODULE_NAME("rscalc")
51
52 /* Local prototypes */
53 static u8 acpi_rs_count_set_bits(u16 bit_field);
54
55 static acpi_rs_length
56 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
57
58 static u32
59 acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
60
61 /*******************************************************************************
62 *
63 * FUNCTION: acpi_rs_count_set_bits
64 *
65 * PARAMETERS: bit_field - Field in which to count bits
66 *
67 * RETURN: Number of bits set within the field
68 *
69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
70 * (Short descriptor) interrupt and DMA lists.
71 *
72 ******************************************************************************/
73
74 static u8 acpi_rs_count_set_bits(u16 bit_field)
75 {
76 u8 bits_set;
77
78 ACPI_FUNCTION_ENTRY();
79
80 for (bits_set = 0; bit_field; bits_set++) {
81
82 /* Zero the least significant bit that is set */
83
84 bit_field &= (u16) (bit_field - 1);
85 }
86
87 return (bits_set);
88 }
89
90 /*******************************************************************************
91 *
92 * FUNCTION: acpi_rs_struct_option_length
93 *
94 * PARAMETERS: resource_source - Pointer to optional descriptor field
95 *
96 * RETURN: Status
97 *
98 * DESCRIPTION: Common code to handle optional resource_source_index and
99 * resource_source fields in some Large descriptors. Used during
100 * list-to-stream conversion
101 *
102 ******************************************************************************/
103
104 static acpi_rs_length
105 acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
106 {
107 ACPI_FUNCTION_ENTRY();
108
109 /*
110 * If the resource_source string is valid, return the size of the string
111 * (string_length includes the NULL terminator) plus the size of the
112 * resource_source_index (1).
113 */
114 if (resource_source->string_ptr) {
115 return ((acpi_rs_length) (resource_source->string_length + 1));
116 }
117
118 return (0);
119 }
120
121 /*******************************************************************************
122 *
123 * FUNCTION: acpi_rs_stream_option_length
124 *
125 * PARAMETERS: resource_length - Length from the resource header
126 * minimum_total_length - Minimum length of this resource, before
127 * any optional fields. Includes header size
128 *
129 * RETURN: Length of optional string (0 if no string present)
130 *
131 * DESCRIPTION: Common code to handle optional resource_source_index and
132 * resource_source fields in some Large descriptors. Used during
133 * stream-to-list conversion
134 *
135 ******************************************************************************/
136
137 static u32
138 acpi_rs_stream_option_length(u32 resource_length,
139 u32 minimum_aml_resource_length)
140 {
141 u32 string_length = 0;
142
143 ACPI_FUNCTION_ENTRY();
144
145 /*
146 * The resource_source_index and resource_source are optional elements of some
147 * Large-type resource descriptors.
148 */
149
150 /*
151 * If the length of the actual resource descriptor is greater than the ACPI
152 * spec-defined minimum length, it means that a resource_source_index exists
153 * and is followed by a (required) null terminated string. The string length
154 * (including the null terminator) is the resource length minus the minimum
155 * length, minus one byte for the resource_source_index itself.
156 */
157 if (resource_length > minimum_aml_resource_length) {
158
159 /* Compute the length of the optional string */
160
161 string_length =
162 resource_length - minimum_aml_resource_length - 1;
163 }
164
165 /*
166 * Round the length up to a multiple of the native word in order to
167 * guarantee that the entire resource descriptor is native word aligned
168 */
169 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
170 }
171
172 /*******************************************************************************
173 *
174 * FUNCTION: acpi_rs_get_aml_length
175 *
176 * PARAMETERS: resource - Pointer to the resource linked list
177 * size_needed - Where the required size is returned
178 *
179 * RETURN: Status
180 *
181 * DESCRIPTION: Takes a linked list of internal resource descriptors and
182 * calculates the size buffer needed to hold the corresponding
183 * external resource byte stream.
184 *
185 ******************************************************************************/
186
187 acpi_status
188 acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
189 {
190 acpi_size aml_size_needed = 0;
191 acpi_rs_length total_size;
192
193 ACPI_FUNCTION_TRACE(rs_get_aml_length);
194
195 /* Traverse entire list of internal resource descriptors */
196
197 while (resource) {
198
199 /* Validate the descriptor type */
200
201 if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
202 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
203 }
204
205 /* Sanity check the length. It must not be zero, or we loop forever */
206
207 if (!resource->length) {
208 return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
209 }
210
211 /* Get the base size of the (external stream) resource descriptor */
212
213 total_size = acpi_gbl_aml_resource_sizes[resource->type];
214
215 /*
216 * Augment the base size for descriptors with optional and/or
217 * variable-length fields
218 */
219 switch (resource->type) {
220 case ACPI_RESOURCE_TYPE_IRQ:
221
222 /* Length can be 3 or 2 */
223
224 if (resource->data.irq.descriptor_length == 2) {
225 total_size--;
226 }
227 break;
228
229 case ACPI_RESOURCE_TYPE_START_DEPENDENT:
230
231 /* Length can be 1 or 0 */
232
233 if (resource->data.irq.descriptor_length == 0) {
234 total_size--;
235 }
236 break;
237
238 case ACPI_RESOURCE_TYPE_VENDOR:
239 /*
240 * Vendor Defined Resource:
241 * For a Vendor Specific resource, if the Length is between 1 and 7
242 * it will be created as a Small Resource data type, otherwise it
243 * is a Large Resource data type.
244 */
245 if (resource->data.vendor.byte_length > 7) {
246
247 /* Base size of a Large resource descriptor */
248
249 total_size =
250 sizeof(struct aml_resource_large_header);
251 }
252
253 /* Add the size of the vendor-specific data */
254
255 total_size = (acpi_rs_length)
256 (total_size + resource->data.vendor.byte_length);
257 break;
258
259 case ACPI_RESOURCE_TYPE_END_TAG:
260 /*
261 * End Tag:
262 * We are done -- return the accumulated total size.
263 */
264 *size_needed = aml_size_needed + total_size;
265
266 /* Normal exit */
267
268 return_ACPI_STATUS(AE_OK);
269
270 case ACPI_RESOURCE_TYPE_ADDRESS16:
271 /*
272 * 16-Bit Address Resource:
273 * Add the size of the optional resource_source info
274 */
275 total_size = (acpi_rs_length)
276 (total_size +
277 acpi_rs_struct_option_length(&resource->data.
278 address16.
279 resource_source));
280 break;
281
282 case ACPI_RESOURCE_TYPE_ADDRESS32:
283 /*
284 * 32-Bit Address Resource:
285 * Add the size of the optional resource_source info
286 */
287 total_size = (acpi_rs_length)
288 (total_size +
289 acpi_rs_struct_option_length(&resource->data.
290 address32.
291 resource_source));
292 break;
293
294 case ACPI_RESOURCE_TYPE_ADDRESS64:
295 /*
296 * 64-Bit Address Resource:
297 * Add the size of the optional resource_source info
298 */
299 total_size = (acpi_rs_length)
300 (total_size +
301 acpi_rs_struct_option_length(&resource->data.
302 address64.
303 resource_source));
304 break;
305
306 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
307 /*
308 * Extended IRQ Resource:
309 * Add the size of each additional optional interrupt beyond the
310 * required 1 (4 bytes for each u32 interrupt number)
311 */
312 total_size = (acpi_rs_length)
313 (total_size +
314 ((resource->data.extended_irq.interrupt_count -
315 1) * 4) +
316 /* Add the size of the optional resource_source info */
317 acpi_rs_struct_option_length(&resource->data.
318 extended_irq.
319 resource_source));
320 break;
321
322 case ACPI_RESOURCE_TYPE_GPIO:
323
324 total_size =
325 (acpi_rs_length) (total_size +
326 (resource->data.gpio.
327 pin_table_length * 2) +
328 resource->data.gpio.
329 resource_source.string_length +
330 resource->data.gpio.
331 vendor_length);
332
333 break;
334
335 case ACPI_RESOURCE_TYPE_SERIAL_BUS:
336
337 total_size =
338 acpi_gbl_aml_resource_serial_bus_sizes[resource->
339 data.
340 common_serial_bus.
341 type];
342
343 total_size = (acpi_rs_length) (total_size +
344 resource->data.
345 i2c_serial_bus.
346 resource_source.
347 string_length +
348 resource->data.
349 i2c_serial_bus.
350 vendor_length);
351
352 break;
353
354 default:
355
356 break;
357 }
358
359 /* Update the total */
360
361 aml_size_needed += total_size;
362
363 /* Point to the next object */
364
365 resource =
366 ACPI_ADD_PTR(struct acpi_resource, resource,
367 resource->length);
368 }
369
370 /* Did not find an end_tag resource descriptor */
371
372 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
373 }
374
375 /*******************************************************************************
376 *
377 * FUNCTION: acpi_rs_get_list_length
378 *
379 * PARAMETERS: aml_buffer - Pointer to the resource byte stream
380 * aml_buffer_length - Size of aml_buffer
381 * size_needed - Where the size needed is returned
382 *
383 * RETURN: Status
384 *
385 * DESCRIPTION: Takes an external resource byte stream and calculates the size
386 * buffer needed to hold the corresponding internal resource
387 * descriptor linked list.
388 *
389 ******************************************************************************/
390
391 acpi_status
392 acpi_rs_get_list_length(u8 * aml_buffer,
393 u32 aml_buffer_length, acpi_size * size_needed)
394 {
395 acpi_status status;
396 u8 *end_aml;
397 u8 *buffer;
398 u32 buffer_size;
399 u16 temp16;
400 u16 resource_length;
401 u32 extra_struct_bytes;
402 u8 resource_index;
403 u8 minimum_aml_resource_length;
404 union aml_resource *aml_resource;
405
406 ACPI_FUNCTION_TRACE(rs_get_list_length);
407
408 *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */
409 end_aml = aml_buffer + aml_buffer_length;
410
411 /* Walk the list of AML resource descriptors */
412
413 while (aml_buffer < end_aml) {
414
415 /* Validate the Resource Type and Resource Length */
416
417 status =
418 acpi_ut_validate_resource(NULL, aml_buffer,
419 &resource_index);
420 if (ACPI_FAILURE(status)) {
421 /*
422 * Exit on failure. Cannot continue because the descriptor length
423 * may be bogus also.
424 */
425 return_ACPI_STATUS(status);
426 }
427
428 aml_resource = (void *)aml_buffer;
429
430 /* Get the resource length and base (minimum) AML size */
431
432 resource_length = acpi_ut_get_resource_length(aml_buffer);
433 minimum_aml_resource_length =
434 acpi_gbl_resource_aml_sizes[resource_index];
435
436 /*
437 * Augment the size for descriptors with optional
438 * and/or variable length fields
439 */
440 extra_struct_bytes = 0;
441 buffer =
442 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
443
444 switch (acpi_ut_get_resource_type(aml_buffer)) {
445 case ACPI_RESOURCE_NAME_IRQ:
446 /*
447 * IRQ Resource:
448 * Get the number of bits set in the 16-bit IRQ mask
449 */
450 ACPI_MOVE_16_TO_16(&temp16, buffer);
451 extra_struct_bytes = acpi_rs_count_set_bits(temp16);
452 break;
453
454 case ACPI_RESOURCE_NAME_DMA:
455 /*
456 * DMA Resource:
457 * Get the number of bits set in the 8-bit DMA mask
458 */
459 extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
460 break;
461
462 case ACPI_RESOURCE_NAME_VENDOR_SMALL:
463 case ACPI_RESOURCE_NAME_VENDOR_LARGE:
464 /*
465 * Vendor Resource:
466 * Get the number of vendor data bytes
467 */
468 extra_struct_bytes = resource_length;
469
470 /*
471 * There is already one byte included in the minimum
472 * descriptor size. If there are extra struct bytes,
473 * subtract one from the count.
474 */
475 if (extra_struct_bytes) {
476 extra_struct_bytes--;
477 }
478 break;
479
480 case ACPI_RESOURCE_NAME_END_TAG:
481 /*
482 * End Tag: This is the normal exit
483 */
484 return_ACPI_STATUS(AE_OK);
485
486 case ACPI_RESOURCE_NAME_ADDRESS32:
487 case ACPI_RESOURCE_NAME_ADDRESS16:
488 case ACPI_RESOURCE_NAME_ADDRESS64:
489 /*
490 * Address Resource:
491 * Add the size of the optional resource_source
492 */
493 extra_struct_bytes =
494 acpi_rs_stream_option_length(resource_length,
495 minimum_aml_resource_length);
496 break;
497
498 case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
499 /*
500 * Extended IRQ Resource:
501 * Using the interrupt_table_length, add 4 bytes for each additional
502 * interrupt. Note: at least one interrupt is required and is
503 * included in the minimum descriptor size (reason for the -1)
504 */
505 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
506
507 /* Add the size of the optional resource_source */
508
509 extra_struct_bytes +=
510 acpi_rs_stream_option_length(resource_length -
511 extra_struct_bytes,
512 minimum_aml_resource_length);
513 break;
514
515 case ACPI_RESOURCE_NAME_GPIO:
516
517 /* Vendor data is optional */
518
519 if (aml_resource->gpio.vendor_length) {
520 extra_struct_bytes +=
521 aml_resource->gpio.vendor_offset -
522 aml_resource->gpio.pin_table_offset +
523 aml_resource->gpio.vendor_length;
524 } else {
525 extra_struct_bytes +=
526 aml_resource->large_header.resource_length +
527 sizeof(struct aml_resource_large_header) -
528 aml_resource->gpio.pin_table_offset;
529 }
530 break;
531
532 case ACPI_RESOURCE_NAME_SERIAL_BUS:
533
534 minimum_aml_resource_length =
535 acpi_gbl_resource_aml_serial_bus_sizes
536 [aml_resource->common_serial_bus.type];
537 extra_struct_bytes +=
538 aml_resource->common_serial_bus.resource_length -
539 minimum_aml_resource_length;
540 break;
541
542 default:
543
544 break;
545 }
546
547 /*
548 * Update the required buffer size for the internal descriptor structs
549 *
550 * Important: Round the size up for the appropriate alignment. This
551 * is a requirement on IA64.
552 */
553 if (acpi_ut_get_resource_type(aml_buffer) ==
554 ACPI_RESOURCE_NAME_SERIAL_BUS) {
555 buffer_size =
556 acpi_gbl_resource_struct_serial_bus_sizes
557 [aml_resource->common_serial_bus.type] +
558 extra_struct_bytes;
559 } else {
560 buffer_size =
561 acpi_gbl_resource_struct_sizes[resource_index] +
562 extra_struct_bytes;
563 }
564 buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
565
566 *size_needed += buffer_size;
567
568 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
569 "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
570 acpi_ut_get_resource_type(aml_buffer),
571 acpi_ut_get_descriptor_length(aml_buffer),
572 buffer_size));
573
574 /*
575 * Point to the next resource within the AML stream using the length
576 * contained in the resource descriptor header
577 */
578 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
579 }
580
581 /* Did not find an end_tag resource descriptor */
582
583 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
584 }
585
586 /*******************************************************************************
587 *
588 * FUNCTION: acpi_rs_get_pci_routing_table_length
589 *
590 * PARAMETERS: package_object - Pointer to the package object
591 * buffer_size_needed - u32 pointer of the size buffer
592 * needed to properly return the
593 * parsed data
594 *
595 * RETURN: Status
596 *
597 * DESCRIPTION: Given a package representing a PCI routing table, this
598 * calculates the size of the corresponding linked list of
599 * descriptions.
600 *
601 ******************************************************************************/
602
603 acpi_status
604 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
605 acpi_size * buffer_size_needed)
606 {
607 u32 number_of_elements;
608 acpi_size temp_size_needed = 0;
609 union acpi_operand_object **top_object_list;
610 u32 index;
611 union acpi_operand_object *package_element;
612 union acpi_operand_object **sub_object_list;
613 u8 name_found;
614 u32 table_index;
615
616 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
617
618 number_of_elements = package_object->package.count;
619
620 /*
621 * Calculate the size of the return buffer.
622 * The base size is the number of elements * the sizes of the
623 * structures. Additional space for the strings is added below.
624 * The minus one is to subtract the size of the u8 Source[1]
625 * member because it is added below.
626 *
627 * But each PRT_ENTRY structure has a pointer to a string and
628 * the size of that string must be found.
629 */
630 top_object_list = package_object->package.elements;
631
632 for (index = 0; index < number_of_elements; index++) {
633
634 /* Dereference the sub-package */
635
636 package_element = *top_object_list;
637
638 /* We must have a valid Package object */
639
640 if (!package_element ||
641 (package_element->common.type != ACPI_TYPE_PACKAGE)) {
642 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
643 }
644
645 /*
646 * The sub_object_list will now point to an array of the
647 * four IRQ elements: Address, Pin, Source and source_index
648 */
649 sub_object_list = package_element->package.elements;
650
651 /* Scan the irq_table_elements for the Source Name String */
652
653 name_found = FALSE;
654
655 for (table_index = 0;
656 table_index < package_element->package.count
657 && !name_found; table_index++) {
658 if (*sub_object_list && /* Null object allowed */
659 ((ACPI_TYPE_STRING ==
660 (*sub_object_list)->common.type) ||
661 ((ACPI_TYPE_LOCAL_REFERENCE ==
662 (*sub_object_list)->common.type) &&
663 ((*sub_object_list)->reference.class ==
664 ACPI_REFCLASS_NAME)))) {
665 name_found = TRUE;
666 } else {
667 /* Look at the next element */
668
669 sub_object_list++;
670 }
671 }
672
673 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
674
675 /* Was a String type found? */
676
677 if (name_found) {
678 if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) {
679 /*
680 * The length String.Length field does not include the
681 * terminating NULL, add 1
682 */
683 temp_size_needed += ((acpi_size)
684 (*sub_object_list)->string.
685 length + 1);
686 } else {
687 temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
688 }
689 } else {
690 /*
691 * If no name was found, then this is a NULL, which is
692 * translated as a u32 zero.
693 */
694 temp_size_needed += sizeof(u32);
695 }
696
697 /* Round up the size since each element must be aligned */
698
699 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
700
701 /* Point to the next union acpi_operand_object */
702
703 top_object_list++;
704 }
705
706 /*
707 * Add an extra element to the end of the list, essentially a
708 * NULL terminator
709 */
710 *buffer_size_needed =
711 temp_size_needed + sizeof(struct acpi_pci_routing_table);
712 return_ACPI_STATUS(AE_OK);
713 }
This page took 0.044358 seconds and 6 git commands to generate.