drivers/acpi/acpica/utcopy.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utcopy - Internal to external object translation utilities
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47
  48
  49 #define _COMPONENT          ACPI_UTILITIES
  50 ACPI_MODULE_NAME("utcopy")
  51
  52 /* Local prototypes */
  53 static acpi_status
  54 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
  55                                 union acpi_object *external_object,
  56                                 u8 *data_space, acpi_size *buffer_space_used);
  57
  58 static acpi_status
  59 acpi_ut_copy_ielement_to_ielement(u8 object_type,
  60                                   union acpi_operand_object *source_object,
  61                                   union acpi_generic_state *state,
  62                                   void *context);
  63
  64 static acpi_status
  65 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
  66                                   u8 *buffer, acpi_size *space_used);
  67
  68 static acpi_status
  69 acpi_ut_copy_esimple_to_isimple(union acpi_object *user_obj,
  70                                 union acpi_operand_object **return_obj);
  71
  72 static acpi_status
  73 acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
  74                                   union acpi_operand_object **internal_object);
  75
  76 static acpi_status
  77 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
  78                            union acpi_operand_object *dest_desc);
  79
  80 static acpi_status
  81 acpi_ut_copy_ielement_to_eelement(u8 object_type,
  82                                   union acpi_operand_object *source_object,
  83                                   union acpi_generic_state *state,
  84                                   void *context);
  85
  86 static acpi_status
  87 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
  88                                   union acpi_operand_object *dest_obj,
  89                                   struct acpi_walk_state *walk_state);
  90
  91 /*******************************************************************************
  92  *
  93  * FUNCTION:    acpi_ut_copy_isimple_to_esimple
  94  *
  95  * PARAMETERS:  internal_object     - Source object to be copied
  96  *              external_object     - Where to return the copied object
  97  *              data_space          - Where object data is returned (such as
  98  *                                    buffer and string data)
  99  *              buffer_space_used   - Length of data_space that was used
 100  *
 101  * RETURN:      Status
 102  *
 103  * DESCRIPTION: This function is called to copy a simple internal object to
 104  *              an external object.
 105  *
 106  *              The data_space buffer is assumed to have sufficient space for
 107  *              the object.
 108  *
 109  ******************************************************************************/
 110
 111 static acpi_status
 112 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
 113                                 union acpi_object *external_object,
 114                                 u8 *data_space, acpi_size *buffer_space_used)
 115 {
 116         acpi_status status = AE_OK;
 117
 118         ACPI_FUNCTION_TRACE(ut_copy_isimple_to_esimple);
 119
 120         *buffer_space_used = 0;
 121
 122         /*
 123          * Check for NULL object case (could be an uninitialized
 124          * package element)
 125          */
 126         if (!internal_object) {
 127                 return_ACPI_STATUS(AE_OK);
 128         }
 129
 130         /* Always clear the external object */
 131
 132         memset(external_object, 0, sizeof(union acpi_object));
 133
 134         /*
 135          * In general, the external object will be the same type as
 136          * the internal object
 137          */
 138         external_object->type = internal_object->common.type;
 139
 140         /* However, only a limited number of external types are supported */
 141
 142         switch (internal_object->common.type) {
 143         case ACPI_TYPE_STRING:
 144
 145                 external_object->string.pointer = (char *)data_space;
 146                 external_object->string.length = internal_object->string.length;
 147                 *buffer_space_used = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 148                                                                   internal_object->
 149                                                                   string.
 150                                                                   length + 1);
 151
 152                 memcpy((void *)data_space,
 153                        (void *)internal_object->string.pointer,
 154                        (acpi_size)internal_object->string.length + 1);
 155                 break;
 156
 157         case ACPI_TYPE_BUFFER:
 158
 159                 external_object->buffer.pointer = data_space;
 160                 external_object->buffer.length = internal_object->buffer.length;
 161                 *buffer_space_used =
 162                     ACPI_ROUND_UP_TO_NATIVE_WORD(internal_object->string.
 163                                                  length);
 164
 165                 memcpy((void *)data_space,
 166                        (void *)internal_object->buffer.pointer,
 167                        internal_object->buffer.length);
 168                 break;
 169
 170         case ACPI_TYPE_INTEGER:
 171
 172                 external_object->integer.value = internal_object->integer.value;
 173                 break;
 174
 175         case ACPI_TYPE_LOCAL_REFERENCE:
 176
 177                 /* This is an object reference. */
 178
 179                 switch (internal_object->reference.class) {
 180                 case ACPI_REFCLASS_NAME:
 181                         /*
 182                          * For namepath, return the object handle ("reference")
 183                          * We are referring to the namespace node
 184                          */
 185                         external_object->reference.handle =
 186                             internal_object->reference.node;
 187                         external_object->reference.actual_type =
 188                             acpi_ns_get_type(internal_object->reference.node);
 189                         break;
 190
 191                 default:
 192
 193                         /* All other reference types are unsupported */
 194
 195                         return_ACPI_STATUS(AE_TYPE);
 196                 }
 197                 break;
 198
 199         case ACPI_TYPE_PROCESSOR:
 200
 201                 external_object->processor.proc_id =
 202                     internal_object->processor.proc_id;
 203                 external_object->processor.pblk_address =
 204                     internal_object->processor.address;
 205                 external_object->processor.pblk_length =
 206                     internal_object->processor.length;
 207                 break;
 208
 209         case ACPI_TYPE_POWER:
 210
 211                 external_object->power_resource.system_level =
 212                     internal_object->power_resource.system_level;
 213
 214                 external_object->power_resource.resource_order =
 215                     internal_object->power_resource.resource_order;
 216                 break;
 217
 218         default:
 219                 /*
 220                  * There is no corresponding external object type
 221                  */
 222                 ACPI_ERROR((AE_INFO,
 223                             "Unsupported object type, cannot convert to external object: %s",
 224                             acpi_ut_get_type_name(internal_object->common.
 225                                                   type)));
 226
 227                 return_ACPI_STATUS(AE_SUPPORT);
 228         }
 229
 230         return_ACPI_STATUS(status);
 231 }
 232
 233 /*******************************************************************************
 234  *
 235  * FUNCTION:    acpi_ut_copy_ielement_to_eelement
 236  *
 237  * PARAMETERS:  acpi_pkg_callback
 238  *
 239  * RETURN:      Status
 240  *
 241  * DESCRIPTION: Copy one package element to another package element
 242  *
 243  ******************************************************************************/
 244
 245 static acpi_status
 246 acpi_ut_copy_ielement_to_eelement(u8 object_type,
 247                                   union acpi_operand_object *source_object,
 248                                   union acpi_generic_state *state,
 249                                   void *context)
 250 {
 251         acpi_status status = AE_OK;
 252         struct acpi_pkg_info *info = (struct acpi_pkg_info *)context;
 253         acpi_size object_space;
 254         u32 this_index;
 255         union acpi_object *target_object;
 256
 257         ACPI_FUNCTION_ENTRY();
 258
 259         this_index = state->pkg.index;
 260         target_object = (union acpi_object *)&((union acpi_object *)
 261                                                (state->pkg.dest_object))->
 262             package.elements[this_index];
 263
 264         switch (object_type) {
 265         case ACPI_COPY_TYPE_SIMPLE:
 266                 /*
 267                  * This is a simple or null object
 268                  */
 269                 status = acpi_ut_copy_isimple_to_esimple(source_object,
 270                                                          target_object,
 271                                                          info->free_space,
 272                                                          &object_space);
 273                 if (ACPI_FAILURE(status)) {
 274                         return (status);
 275                 }
 276                 break;
 277
 278         case ACPI_COPY_TYPE_PACKAGE:
 279                 /*
 280                  * Build the package object
 281                  */
 282                 target_object->type = ACPI_TYPE_PACKAGE;
 283                 target_object->package.count = source_object->package.count;
 284                 target_object->package.elements =
 285                     ACPI_CAST_PTR(union acpi_object, info->free_space);
 286
 287                 /*
 288                  * Pass the new package object back to the package walk routine
 289                  */
 290                 state->pkg.this_target_obj = target_object;
 291
 292                 /*
 293                  * Save space for the array of objects (Package elements)
 294                  * update the buffer length counter
 295                  */
 296                 object_space = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 297                                                             target_object->
 298                                                             package.count *
 299                                                             sizeof(union
 300                                                                    acpi_object));
 301                 break;
 302
 303         default:
 304
 305                 return (AE_BAD_PARAMETER);
 306         }
 307
 308         info->free_space += object_space;
 309         info->length += object_space;
 310         return (status);
 311 }
 312
 313 /*******************************************************************************
 314  *
 315  * FUNCTION:    acpi_ut_copy_ipackage_to_epackage
 316  *
 317  * PARAMETERS:  internal_object     - Pointer to the object we are returning
 318  *              buffer              - Where the object is returned
 319  *              space_used          - Where the object length is returned
 320  *
 321  * RETURN:      Status
 322  *
 323  * DESCRIPTION: This function is called to place a package object in a user
 324  *              buffer. A package object by definition contains other objects.
 325  *
 326  *              The buffer is assumed to have sufficient space for the object.
 327  *              The caller must have verified the buffer length needed using
 328  *              the acpi_ut_get_object_size function before calling this function.
 329  *
 330  ******************************************************************************/
 331
 332 static acpi_status
 333 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
 334                                   u8 *buffer, acpi_size *space_used)
 335 {
 336         union acpi_object *external_object;
 337         acpi_status status;
 338         struct acpi_pkg_info info;
 339
 340         ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_epackage);
 341
 342         /*
 343          * First package at head of the buffer
 344          */
 345         external_object = ACPI_CAST_PTR(union acpi_object, buffer);
 346
 347         /*
 348          * Free space begins right after the first package
 349          */
 350         info.length = ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 351         info.free_space = buffer +
 352             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 353         info.object_space = 0;
 354         info.num_packages = 1;
 355
 356         external_object->type = internal_object->common.type;
 357         external_object->package.count = internal_object->package.count;
 358         external_object->package.elements =
 359             ACPI_CAST_PTR(union acpi_object, info.free_space);
 360
 361         /*
 362          * Leave room for an array of ACPI_OBJECTS in the buffer
 363          * and move the free space past it
 364          */
 365         info.length += (acpi_size)external_object->package.count *
 366             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 367         info.free_space += external_object->package.count *
 368             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 369
 370         status = acpi_ut_walk_package_tree(internal_object, external_object,
 371                                            acpi_ut_copy_ielement_to_eelement,
 372                                            &info);
 373
 374         *space_used = info.length;
 375         return_ACPI_STATUS(status);
 376 }
 377
 378 /*******************************************************************************
 379  *
 380  * FUNCTION:    acpi_ut_copy_iobject_to_eobject
 381  *
 382  * PARAMETERS:  internal_object     - The internal object to be converted
 383  *              ret_buffer          - Where the object is returned
 384  *
 385  * RETURN:      Status
 386  *
 387  * DESCRIPTION: This function is called to build an API object to be returned
 388  *              to the caller.
 389  *
 390  ******************************************************************************/
 391
 392 acpi_status
 393 acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *internal_object,
 394                                 struct acpi_buffer *ret_buffer)
 395 {
 396         acpi_status status;
 397
 398         ACPI_FUNCTION_TRACE(ut_copy_iobject_to_eobject);
 399
 400         if (internal_object->common.type == ACPI_TYPE_PACKAGE) {
 401                 /*
 402                  * Package object:  Copy all subobjects (including
 403                  * nested packages)
 404                  */
 405                 status = acpi_ut_copy_ipackage_to_epackage(internal_object,
 406                                                            ret_buffer->pointer,
 407                                                            &ret_buffer->length);
 408         } else {
 409                 /*
 410                  * Build a simple object (no nested objects)
 411                  */
 412                 status = acpi_ut_copy_isimple_to_esimple(internal_object,
 413                                                          ACPI_CAST_PTR(union
 414                                                                        acpi_object,
 415                                                                        ret_buffer->
 416                                                                        pointer),
 417                                                          ACPI_ADD_PTR(u8,
 418                                                                       ret_buffer->
 419                                                                       pointer,
 420                                                                       ACPI_ROUND_UP_TO_NATIVE_WORD
 421                                                                       (sizeof
 422                                                                        (union
 423                                                                         acpi_object))),
 424                                                          &ret_buffer->length);
 425                 /*
 426                  * build simple does not include the object size in the length
 427                  * so we add it in here
 428                  */
 429                 ret_buffer->length += sizeof(union acpi_object);
 430         }
 431
 432         return_ACPI_STATUS(status);
 433 }
 434
 435 /*******************************************************************************
 436  *
 437  * FUNCTION:    acpi_ut_copy_esimple_to_isimple
 438  *
 439  * PARAMETERS:  external_object     - The external object to be converted
 440  *              ret_internal_object - Where the internal object is returned
 441  *
 442  * RETURN:      Status
 443  *
 444  * DESCRIPTION: This function copies an external object to an internal one.
 445  *              NOTE: Pointers can be copied, we don't need to copy data.
 446  *              (The pointers have to be valid in our address space no matter
 447  *              what we do with them!)
 448  *
 449  ******************************************************************************/
 450
 451 static acpi_status
 452 acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object,
 453                                 union acpi_operand_object **ret_internal_object)
 454 {
 455         union acpi_operand_object *internal_object;
 456
 457         ACPI_FUNCTION_TRACE(ut_copy_esimple_to_isimple);
 458
 459         /*
 460          * Simple types supported are: String, Buffer, Integer
 461          */
 462         switch (external_object->type) {
 463         case ACPI_TYPE_STRING:
 464         case ACPI_TYPE_BUFFER:
 465         case ACPI_TYPE_INTEGER:
 466         case ACPI_TYPE_LOCAL_REFERENCE:
 467
 468                 internal_object = acpi_ut_create_internal_object((u8)
 469                                                                  external_object->
 470                                                                  type);
 471                 if (!internal_object) {
 472                         return_ACPI_STATUS(AE_NO_MEMORY);
 473                 }
 474                 break;
 475
 476         case ACPI_TYPE_ANY:     /* This is the case for a NULL object */
 477
 478                 *ret_internal_object = NULL;
 479                 return_ACPI_STATUS(AE_OK);
 480
 481         default:
 482
 483                 /* All other types are not supported */
 484
 485                 ACPI_ERROR((AE_INFO,
 486                             "Unsupported object type, cannot convert to internal object: %s",
 487                             acpi_ut_get_type_name(external_object->type)));
 488
 489                 return_ACPI_STATUS(AE_SUPPORT);
 490         }
 491
 492         /* Must COPY string and buffer contents */
 493
 494         switch (external_object->type) {
 495         case ACPI_TYPE_STRING:
 496
 497                 internal_object->string.pointer =
 498                     ACPI_ALLOCATE_ZEROED((acpi_size)
 499                                          external_object->string.length + 1);
 500
 501                 if (!internal_object->string.pointer) {
 502                         goto error_exit;
 503                 }
 504
 505                 memcpy(internal_object->string.pointer,
 506                        external_object->string.pointer,
 507                        external_object->string.length);
 508
 509                 internal_object->string.length = external_object->string.length;
 510                 break;
 511
 512         case ACPI_TYPE_BUFFER:
 513
 514                 internal_object->buffer.pointer =
 515                     ACPI_ALLOCATE_ZEROED(external_object->buffer.length);
 516                 if (!internal_object->buffer.pointer) {
 517                         goto error_exit;
 518                 }
 519
 520                 memcpy(internal_object->buffer.pointer,
 521                        external_object->buffer.pointer,
 522                        external_object->buffer.length);
 523
 524                 internal_object->buffer.length = external_object->buffer.length;
 525
 526                 /* Mark buffer data valid */
 527
 528                 internal_object->buffer.flags |= AOPOBJ_DATA_VALID;
 529                 break;
 530
 531         case ACPI_TYPE_INTEGER:
 532
 533                 internal_object->integer.value = external_object->integer.value;
 534                 break;
 535
 536         case ACPI_TYPE_LOCAL_REFERENCE:
 537
 538                 /* An incoming reference is defined to be a namespace node */
 539
 540                 internal_object->reference.class = ACPI_REFCLASS_REFOF;
 541                 internal_object->reference.object =
 542                     external_object->reference.handle;
 543                 break;
 544
 545         default:
 546
 547                 /* Other types can't get here */
 548
 549                 break;
 550         }
 551
 552         *ret_internal_object = internal_object;
 553         return_ACPI_STATUS(AE_OK);
 554
 555 error_exit:
 556         acpi_ut_remove_reference(internal_object);
 557         return_ACPI_STATUS(AE_NO_MEMORY);
 558 }
 559
 560 /*******************************************************************************
 561  *
 562  * FUNCTION:    acpi_ut_copy_epackage_to_ipackage
 563  *
 564  * PARAMETERS:  external_object     - The external object to be converted
 565  *              internal_object     - Where the internal object is returned
 566  *
 567  * RETURN:      Status
 568  *
 569  * DESCRIPTION: Copy an external package object to an internal package.
 570  *              Handles nested packages.
 571  *
 572  ******************************************************************************/
 573
 574 static acpi_status
 575 acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
 576                                   union acpi_operand_object **internal_object)
 577 {
 578         acpi_status status = AE_OK;
 579         union acpi_operand_object *package_object;
 580         union acpi_operand_object **package_elements;
 581         u32 i;
 582
 583         ACPI_FUNCTION_TRACE(ut_copy_epackage_to_ipackage);
 584
 585         /* Create the package object */
 586
 587         package_object =
 588             acpi_ut_create_package_object(external_object->package.count);
 589         if (!package_object) {
 590                 return_ACPI_STATUS(AE_NO_MEMORY);
 591         }
 592
 593         package_elements = package_object->package.elements;
 594
 595         /*
 596          * Recursive implementation. Probably ok, since nested external
 597          * packages as parameters should be very rare.
 598          */
 599         for (i = 0; i < external_object->package.count; i++) {
 600                 status =
 601                     acpi_ut_copy_eobject_to_iobject(&external_object->package.
 602                                                     elements[i],
 603                                                     &package_elements[i]);
 604                 if (ACPI_FAILURE(status)) {
 605
 606                         /* Truncate package and delete it */
 607
 608                         package_object->package.count = i;
 609                         package_elements[i] = NULL;
 610                         acpi_ut_remove_reference(package_object);
 611                         return_ACPI_STATUS(status);
 612                 }
 613         }
 614
 615         /* Mark package data valid */
 616
 617         package_object->package.flags |= AOPOBJ_DATA_VALID;
 618
 619         *internal_object = package_object;
 620         return_ACPI_STATUS(status);
 621 }
 622
 623 /*******************************************************************************
 624  *
 625  * FUNCTION:    acpi_ut_copy_eobject_to_iobject
 626  *
 627  * PARAMETERS:  external_object     - The external object to be converted
 628  *              internal_object     - Where the internal object is returned
 629  *
 630  * RETURN:      Status
 631  *
 632  * DESCRIPTION: Converts an external object to an internal object.
 633  *
 634  ******************************************************************************/
 635
 636 acpi_status
 637 acpi_ut_copy_eobject_to_iobject(union acpi_object *external_object,
 638                                 union acpi_operand_object **internal_object)
 639 {
 640         acpi_status status;
 641
 642         ACPI_FUNCTION_TRACE(ut_copy_eobject_to_iobject);
 643
 644         if (external_object->type == ACPI_TYPE_PACKAGE) {
 645                 status =
 646                     acpi_ut_copy_epackage_to_ipackage(external_object,
 647                                                       internal_object);
 648         } else {
 649                 /*
 650                  * Build a simple object (no nested objects)
 651                  */
 652                 status = acpi_ut_copy_esimple_to_isimple(external_object,
 653                                                          internal_object);
 654         }
 655
 656         return_ACPI_STATUS(status);
 657 }
 658
 659 /*******************************************************************************
 660  *
 661  * FUNCTION:    acpi_ut_copy_simple_object
 662  *
 663  * PARAMETERS:  source_desc         - The internal object to be copied
 664  *              dest_desc           - New target object
 665  *
 666  * RETURN:      Status
 667  *
 668  * DESCRIPTION: Simple copy of one internal object to another. Reference count
 669  *              of the destination object is preserved.
 670  *
 671  ******************************************************************************/
 672
 673 static acpi_status
 674 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 675                            union acpi_operand_object *dest_desc)
 676 {
 677         u16 reference_count;
 678         union acpi_operand_object *next_object;
 679         acpi_status status;
 680         acpi_size copy_size;
 681
 682         /* Save fields from destination that we don't want to overwrite */
 683
 684         reference_count = dest_desc->common.reference_count;
 685         next_object = dest_desc->common.next_object;
 686
 687         /*
 688          * Copy the entire source object over the destination object.
 689          * Note: Source can be either an operand object or namespace node.
 690          */
 691         copy_size = sizeof(union acpi_operand_object);
 692         if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_NAMED) {
 693                 copy_size = sizeof(struct acpi_namespace_node);
 694         }
 695
 696         memcpy(ACPI_CAST_PTR(char, dest_desc),
 697                ACPI_CAST_PTR(char, source_desc), copy_size);
 698
 699         /* Restore the saved fields */
 700
 701         dest_desc->common.reference_count = reference_count;
 702         dest_desc->common.next_object = next_object;
 703
 704         /* New object is not static, regardless of source */
 705
 706         dest_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
 707
 708         /* Handle the objects with extra data */
 709
 710         switch (dest_desc->common.type) {
 711         case ACPI_TYPE_BUFFER:
 712                 /*
 713                  * Allocate and copy the actual buffer if and only if:
 714                  * 1) There is a valid buffer pointer
 715                  * 2) The buffer has a length > 0
 716                  */
 717                 if ((source_desc->buffer.pointer) &&
 718                     (source_desc->buffer.length)) {
 719                         dest_desc->buffer.pointer =
 720                             ACPI_ALLOCATE(source_desc->buffer.length);
 721                         if (!dest_desc->buffer.pointer) {
 722                                 return (AE_NO_MEMORY);
 723                         }
 724
 725                         /* Copy the actual buffer data */
 726
 727                         memcpy(dest_desc->buffer.pointer,
 728                                source_desc->buffer.pointer,
 729                                source_desc->buffer.length);
 730                 }
 731                 break;
 732
 733         case ACPI_TYPE_STRING:
 734                 /*
 735                  * Allocate and copy the actual string if and only if:
 736                  * 1) There is a valid string pointer
 737                  * (Pointer to a NULL string is allowed)
 738                  */
 739                 if (source_desc->string.pointer) {
 740                         dest_desc->string.pointer =
 741                             ACPI_ALLOCATE((acpi_size)source_desc->string.
 742                                           length + 1);
 743                         if (!dest_desc->string.pointer) {
 744                                 return (AE_NO_MEMORY);
 745                         }
 746
 747                         /* Copy the actual string data */
 748
 749                         memcpy(dest_desc->string.pointer,
 750                                source_desc->string.pointer,
 751                                (acpi_size)source_desc->string.length + 1);
 752                 }
 753                 break;
 754
 755         case ACPI_TYPE_LOCAL_REFERENCE:
 756                 /*
 757                  * We copied the reference object, so we now must add a reference
 758                  * to the object pointed to by the reference
 759                  *
 760                  * DDBHandle reference (from Load/load_table) is a special reference,
 761                  * it does not have a Reference.Object, so does not need to
 762                  * increase the reference count
 763                  */
 764                 if (source_desc->reference.class == ACPI_REFCLASS_TABLE) {
 765                         break;
 766                 }
 767
 768                 acpi_ut_add_reference(source_desc->reference.object);
 769                 break;
 770
 771         case ACPI_TYPE_REGION:
 772                 /*
 773                  * We copied the Region Handler, so we now must add a reference
 774                  */
 775                 if (dest_desc->region.handler) {
 776                         acpi_ut_add_reference(dest_desc->region.handler);
 777                 }
 778                 break;
 779
 780                 /*
 781                  * For Mutex and Event objects, we cannot simply copy the underlying
 782                  * OS object. We must create a new one.
 783                  */
 784         case ACPI_TYPE_MUTEX:
 785
 786                 status = acpi_os_create_mutex(&dest_desc->mutex.os_mutex);
 787                 if (ACPI_FAILURE(status)) {
 788                         return (status);
 789                 }
 790                 break;
 791
 792         case ACPI_TYPE_EVENT:
 793
 794                 status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
 795                                                   &dest_desc->event.
 796                                                   os_semaphore);
 797                 if (ACPI_FAILURE(status)) {
 798                         return (status);
 799                 }
 800                 break;
 801
 802         default:
 803
 804                 /* Nothing to do for other simple objects */
 805
 806                 break;
 807         }
 808
 809         return (AE_OK);
 810 }
 811
 812 /*******************************************************************************
 813  *
 814  * FUNCTION:    acpi_ut_copy_ielement_to_ielement
 815  *
 816  * PARAMETERS:  acpi_pkg_callback
 817  *
 818  * RETURN:      Status
 819  *
 820  * DESCRIPTION: Copy one package element to another package element
 821  *
 822  ******************************************************************************/
 823
 824 static acpi_status
 825 acpi_ut_copy_ielement_to_ielement(u8 object_type,
 826                                   union acpi_operand_object *source_object,
 827                                   union acpi_generic_state *state,
 828                                   void *context)
 829 {
 830         acpi_status status = AE_OK;
 831         u32 this_index;
 832         union acpi_operand_object **this_target_ptr;
 833         union acpi_operand_object *target_object;
 834
 835         ACPI_FUNCTION_ENTRY();
 836
 837         this_index = state->pkg.index;
 838         this_target_ptr = (union acpi_operand_object **)
 839             &state->pkg.dest_object->package.elements[this_index];
 840
 841         switch (object_type) {
 842         case ACPI_COPY_TYPE_SIMPLE:
 843
 844                 /* A null source object indicates a (legal) null package element */
 845
 846                 if (source_object) {
 847                         /*
 848                          * This is a simple object, just copy it
 849                          */
 850                         target_object =
 851                             acpi_ut_create_internal_object(source_object->
 852                                                            common.type);
 853                         if (!target_object) {
 854                                 return (AE_NO_MEMORY);
 855                         }
 856
 857                         status =
 858                             acpi_ut_copy_simple_object(source_object,
 859                                                        target_object);
 860                         if (ACPI_FAILURE(status)) {
 861                                 goto error_exit;
 862                         }
 863
 864                         *this_target_ptr = target_object;
 865                 } else {
 866                         /* Pass through a null element */
 867
 868                         *this_target_ptr = NULL;
 869                 }
 870                 break;
 871
 872         case ACPI_COPY_TYPE_PACKAGE:
 873                 /*
 874                  * This object is a package - go down another nesting level
 875                  * Create and build the package object
 876                  */
 877                 target_object =
 878                     acpi_ut_create_package_object(source_object->package.count);
 879                 if (!target_object) {
 880                         return (AE_NO_MEMORY);
 881                 }
 882
 883                 target_object->common.flags = source_object->common.flags;
 884
 885                 /* Pass the new package object back to the package walk routine */
 886
 887                 state->pkg.this_target_obj = target_object;
 888
 889                 /* Store the object pointer in the parent package object */
 890
 891                 *this_target_ptr = target_object;
 892                 break;
 893
 894         default:
 895
 896                 return (AE_BAD_PARAMETER);
 897         }
 898
 899         return (status);
 900
 901 error_exit:
 902         acpi_ut_remove_reference(target_object);
 903         return (status);
 904 }
 905
 906 /*******************************************************************************
 907  *
 908  * FUNCTION:    acpi_ut_copy_ipackage_to_ipackage
 909  *
 910  * PARAMETERS:  source_obj      - Pointer to the source package object
 911  *              dest_obj        - Where the internal object is returned
 912  *              walk_state      - Current Walk state descriptor
 913  *
 914  * RETURN:      Status
 915  *
 916  * DESCRIPTION: This function is called to copy an internal package object
 917  *              into another internal package object.
 918  *
 919  ******************************************************************************/
 920
 921 static acpi_status
 922 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
 923                                   union acpi_operand_object *dest_obj,
 924                                   struct acpi_walk_state *walk_state)
 925 {
 926         acpi_status status = AE_OK;
 927
 928         ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_ipackage);
 929
 930         dest_obj->common.type = source_obj->common.type;
 931         dest_obj->common.flags = source_obj->common.flags;
 932         dest_obj->package.count = source_obj->package.count;
 933
 934         /*
 935          * Create the object array and walk the source package tree
 936          */
 937         dest_obj->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
 938                                                            source_obj->package.
 939                                                            count +
 940                                                            1) * sizeof(void *));
 941         if (!dest_obj->package.elements) {
 942                 ACPI_ERROR((AE_INFO, "Package allocation failure"));
 943                 return_ACPI_STATUS(AE_NO_MEMORY);
 944         }
 945
 946         /*
 947          * Copy the package element-by-element by walking the package "tree".
 948          * This handles nested packages of arbitrary depth.
 949          */
 950         status = acpi_ut_walk_package_tree(source_obj, dest_obj,
 951                                            acpi_ut_copy_ielement_to_ielement,
 952                                            walk_state);
 953         if (ACPI_FAILURE(status)) {
 954
 955                 /* On failure, delete the destination package object */
 956
 957                 acpi_ut_remove_reference(dest_obj);
 958         }
 959
 960         return_ACPI_STATUS(status);
 961 }
 962
 963 /*******************************************************************************
 964  *
 965  * FUNCTION:    acpi_ut_copy_iobject_to_iobject
 966  *
 967  * PARAMETERS:  source_desc         - The internal object to be copied
 968  *              dest_desc           - Where the copied object is returned
 969  *              walk_state          - Current walk state
 970  *
 971  * RETURN:      Status
 972  *
 973  * DESCRIPTION: Copy an internal object to a new internal object
 974  *
 975  ******************************************************************************/
 976
 977 acpi_status
 978 acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc,
 979                                 union acpi_operand_object **dest_desc,
 980                                 struct acpi_walk_state *walk_state)
 981 {
 982         acpi_status status = AE_OK;
 983
 984         ACPI_FUNCTION_TRACE(ut_copy_iobject_to_iobject);
 985
 986         /* Create the top level object */
 987
 988         *dest_desc = acpi_ut_create_internal_object(source_desc->common.type);
 989         if (!*dest_desc) {
 990                 return_ACPI_STATUS(AE_NO_MEMORY);
 991         }
 992
 993         /* Copy the object and possible subobjects */
 994
 995         if (source_desc->common.type == ACPI_TYPE_PACKAGE) {
 996                 status =
 997                     acpi_ut_copy_ipackage_to_ipackage(source_desc, *dest_desc,
 998                                                       walk_state);
 999         } else {
1000                 status = acpi_ut_copy_simple_object(source_desc, *dest_desc);
1001         }
1002
1003         /* Delete the allocated object if copy failed */
1004
1005         if (ACPI_FAILURE(status)) {
1006                 acpi_ut_remove_reference(*dest_desc);
1007         }
1008
1009         return_ACPI_STATUS(status);
1010 }