drivers/acpi/dispatcher/dsobject.c

   1 /******************************************************************************
   2  *
   3  * Module Name: dsobject - Dispatcher object management routines
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acparser.h>
  46 #include <acpi/amlcode.h>
  47 #include <acpi/acdispat.h>
  48 #include <acpi/acnamesp.h>
  49 #include <acpi/acinterp.h>
  50
  51 #define _COMPONENT          ACPI_DISPATCHER
  52 ACPI_MODULE_NAME("dsobject")
  53
  54 static acpi_status
  55 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
  56                               union acpi_parse_object *op,
  57                               union acpi_operand_object **obj_desc_ptr);
  58
  59 #ifndef ACPI_NO_METHOD_EXECUTION
  60 /*******************************************************************************
  61  *
  62  * FUNCTION:    acpi_ds_build_internal_object
  63  *
  64  * PARAMETERS:  walk_state      - Current walk state
  65  *              Op              - Parser object to be translated
  66  *              obj_desc_ptr    - Where the ACPI internal object is returned
  67  *
  68  * RETURN:      Status
  69  *
  70  * DESCRIPTION: Translate a parser Op object to the equivalent namespace object
  71  *              Simple objects are any objects other than a package object!
  72  *
  73  ******************************************************************************/
  74
  75 static acpi_status
  76 acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
  77                               union acpi_parse_object *op,
  78                               union acpi_operand_object **obj_desc_ptr)
  79 {
  80         union acpi_operand_object *obj_desc;
  81         acpi_status status;
  82
  83         ACPI_FUNCTION_TRACE("ds_build_internal_object");
  84
  85         *obj_desc_ptr = NULL;
  86         if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
  87                 /*
  88                  * This is an named object reference.  If this name was
  89                  * previously looked up in the namespace, it was stored in this op.
  90                  * Otherwise, go ahead and look it up now
  91                  */
  92                 if (!op->common.node) {
  93                         status = acpi_ns_lookup(walk_state->scope_info,
  94                                                 op->common.value.string,
  95                                                 ACPI_TYPE_ANY,
  96                                                 ACPI_IMODE_EXECUTE,
  97                                                 ACPI_NS_SEARCH_PARENT |
  98                                                 ACPI_NS_DONT_OPEN_SCOPE, NULL,
  99                                                 (struct acpi_namespace_node **)
 100                                                 &(op->common.node));
 101
 102                         if (ACPI_FAILURE(status)) {
 103                                 ACPI_REPORT_NSERROR(op->common.value.string,
 104                                                     status);
 105                                 return_ACPI_STATUS(status);
 106                         }
 107                 }
 108         }
 109
 110         /* Create and init the internal ACPI object */
 111
 112         obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
 113                                                    (op->common.aml_opcode))->
 114                                                   object_type);
 115         if (!obj_desc) {
 116                 return_ACPI_STATUS(AE_NO_MEMORY);
 117         }
 118
 119         status =
 120             acpi_ds_init_object_from_op(walk_state, op, op->common.aml_opcode,
 121                                         &obj_desc);
 122         if (ACPI_FAILURE(status)) {
 123                 acpi_ut_remove_reference(obj_desc);
 124                 return_ACPI_STATUS(status);
 125         }
 126
 127         *obj_desc_ptr = obj_desc;
 128         return_ACPI_STATUS(AE_OK);
 129 }
 130
 131 /*******************************************************************************
 132  *
 133  * FUNCTION:    acpi_ds_build_internal_buffer_obj
 134  *
 135  * PARAMETERS:  walk_state      - Current walk state
 136  *              Op              - Parser object to be translated
 137  *              buffer_length   - Length of the buffer
 138  *              obj_desc_ptr    - Where the ACPI internal object is returned
 139  *
 140  * RETURN:      Status
 141  *
 142  * DESCRIPTION: Translate a parser Op package object to the equivalent
 143  *              namespace object
 144  *
 145  ******************************************************************************/
 146
 147 acpi_status
 148 acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
 149                                   union acpi_parse_object *op,
 150                                   u32 buffer_length,
 151                                   union acpi_operand_object **obj_desc_ptr)
 152 {
 153         union acpi_parse_object *arg;
 154         union acpi_operand_object *obj_desc;
 155         union acpi_parse_object *byte_list;
 156         u32 byte_list_length = 0;
 157
 158         ACPI_FUNCTION_TRACE("ds_build_internal_buffer_obj");
 159
 160         obj_desc = *obj_desc_ptr;
 161         if (obj_desc) {
 162                 /*
 163                  * We are evaluating a Named buffer object "Name (xxxx, Buffer)".
 164                  * The buffer object already exists (from the NS node)
 165                  */
 166         } else {
 167                 /* Create a new buffer object */
 168
 169                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
 170                 *obj_desc_ptr = obj_desc;
 171                 if (!obj_desc) {
 172                         return_ACPI_STATUS(AE_NO_MEMORY);
 173                 }
 174         }
 175
 176         /*
 177          * Second arg is the buffer data (optional) byte_list can be either
 178          * individual bytes or a string initializer.  In either case, a
 179          * byte_list appears in the AML.
 180          */
 181         arg = op->common.value.arg;     /* skip first arg */
 182
 183         byte_list = arg->named.next;
 184         if (byte_list) {
 185                 if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
 186                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 187                                           "Expecting bytelist, got AML opcode %X in op %p\n",
 188                                           byte_list->common.aml_opcode,
 189                                           byte_list));
 190
 191                         acpi_ut_remove_reference(obj_desc);
 192                         return (AE_TYPE);
 193                 }
 194
 195                 byte_list_length = (u32) byte_list->common.value.integer;
 196         }
 197
 198         /*
 199          * The buffer length (number of bytes) will be the larger of:
 200          * 1) The specified buffer length and
 201          * 2) The length of the initializer byte list
 202          */
 203         obj_desc->buffer.length = buffer_length;
 204         if (byte_list_length > buffer_length) {
 205                 obj_desc->buffer.length = byte_list_length;
 206         }
 207
 208         /* Allocate the buffer */
 209
 210         if (obj_desc->buffer.length == 0) {
 211                 obj_desc->buffer.pointer = NULL;
 212                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 213                                   "Buffer defined with zero length in AML, creating\n"));
 214         } else {
 215                 obj_desc->buffer.pointer =
 216                     ACPI_MEM_CALLOCATE(obj_desc->buffer.length);
 217                 if (!obj_desc->buffer.pointer) {
 218                         acpi_ut_delete_object_desc(obj_desc);
 219                         return_ACPI_STATUS(AE_NO_MEMORY);
 220                 }
 221
 222                 /* Initialize buffer from the byte_list (if present) */
 223
 224                 if (byte_list) {
 225                         ACPI_MEMCPY(obj_desc->buffer.pointer,
 226                                     byte_list->named.data, byte_list_length);
 227                 }
 228         }
 229
 230         obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
 231         op->common.node = (struct acpi_namespace_node *)obj_desc;
 232         return_ACPI_STATUS(AE_OK);
 233 }
 234
 235 /*******************************************************************************
 236  *
 237  * FUNCTION:    acpi_ds_build_internal_package_obj
 238  *
 239  * PARAMETERS:  walk_state      - Current walk state
 240  *              Op              - Parser object to be translated
 241  *              package_length  - Number of elements in the package
 242  *              obj_desc_ptr    - Where the ACPI internal object is returned
 243  *
 244  * RETURN:      Status
 245  *
 246  * DESCRIPTION: Translate a parser Op package object to the equivalent
 247  *              namespace object
 248  *
 249  ******************************************************************************/
 250
 251 acpi_status
 252 acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 253                                    union acpi_parse_object *op,
 254                                    u32 package_length,
 255                                    union acpi_operand_object **obj_desc_ptr)
 256 {
 257         union acpi_parse_object *arg;
 258         union acpi_parse_object *parent;
 259         union acpi_operand_object *obj_desc = NULL;
 260         u32 package_list_length;
 261         acpi_status status = AE_OK;
 262         u32 i;
 263
 264         ACPI_FUNCTION_TRACE("ds_build_internal_package_obj");
 265
 266         /* Find the parent of a possibly nested package */
 267
 268         parent = op->common.parent;
 269         while ((parent->common.aml_opcode == AML_PACKAGE_OP) ||
 270                (parent->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
 271                 parent = parent->common.parent;
 272         }
 273
 274         obj_desc = *obj_desc_ptr;
 275         if (obj_desc) {
 276                 /*
 277                  * We are evaluating a Named package object "Name (xxxx, Package)".
 278                  * Get the existing package object from the NS node
 279                  */
 280         } else {
 281                 obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
 282                 *obj_desc_ptr = obj_desc;
 283                 if (!obj_desc) {
 284                         return_ACPI_STATUS(AE_NO_MEMORY);
 285                 }
 286
 287                 obj_desc->package.node = parent->common.node;
 288         }
 289
 290         obj_desc->package.count = package_length;
 291
 292         /* Count the number of items in the package list */
 293
 294         package_list_length = 0;
 295         arg = op->common.value.arg;
 296         arg = arg->common.next;
 297         while (arg) {
 298                 package_list_length++;
 299                 arg = arg->common.next;
 300         }
 301
 302         /*
 303          * The package length (number of elements) will be the greater
 304          * of the specified length and the length of the initializer list
 305          */
 306         if (package_list_length > package_length) {
 307                 obj_desc->package.count = package_list_length;
 308         }
 309
 310         /*
 311          * Allocate the pointer array (array of pointers to the
 312          * individual objects). Add an extra pointer slot so
 313          * that the list is always null terminated.
 314          */
 315         obj_desc->package.elements = ACPI_MEM_CALLOCATE(((acpi_size) obj_desc->
 316                                                          package.count +
 317                                                          1) * sizeof(void *));
 318
 319         if (!obj_desc->package.elements) {
 320                 acpi_ut_delete_object_desc(obj_desc);
 321                 return_ACPI_STATUS(AE_NO_MEMORY);
 322         }
 323
 324         /*
 325          * Now init the elements of the package
 326          */
 327         i = 0;
 328         arg = op->common.value.arg;
 329         arg = arg->common.next;
 330         while (arg) {
 331                 if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
 332                         /* Object (package or buffer) is already built */
 333
 334                         obj_desc->package.elements[i] =
 335                             ACPI_CAST_PTR(union acpi_operand_object,
 336                                           arg->common.node);
 337                 } else {
 338                         status = acpi_ds_build_internal_object(walk_state, arg,
 339                                                                &obj_desc->
 340                                                                package.
 341                                                                elements[i]);
 342                 }
 343
 344                 i++;
 345                 arg = arg->common.next;
 346         }
 347
 348         obj_desc->package.flags |= AOPOBJ_DATA_VALID;
 349         op->common.node = (struct acpi_namespace_node *)obj_desc;
 350         return_ACPI_STATUS(status);
 351 }
 352
 353 /*******************************************************************************
 354  *
 355  * FUNCTION:    acpi_ds_create_node
 356  *
 357  * PARAMETERS:  walk_state      - Current walk state
 358  *              Node            - NS Node to be initialized
 359  *              Op              - Parser object to be translated
 360  *
 361  * RETURN:      Status
 362  *
 363  * DESCRIPTION: Create the object to be associated with a namespace node
 364  *
 365  ******************************************************************************/
 366
 367 acpi_status
 368 acpi_ds_create_node(struct acpi_walk_state *walk_state,
 369                     struct acpi_namespace_node *node,
 370                     union acpi_parse_object *op)
 371 {
 372         acpi_status status;
 373         union acpi_operand_object *obj_desc;
 374
 375         ACPI_FUNCTION_TRACE_PTR("ds_create_node", op);
 376
 377         /*
 378          * Because of the execution pass through the non-control-method
 379          * parts of the table, we can arrive here twice.  Only init
 380          * the named object node the first time through
 381          */
 382         if (acpi_ns_get_attached_object(node)) {
 383                 return_ACPI_STATUS(AE_OK);
 384         }
 385
 386         if (!op->common.value.arg) {
 387                 /* No arguments, there is nothing to do */
 388
 389                 return_ACPI_STATUS(AE_OK);
 390         }
 391
 392         /* Build an internal object for the argument(s) */
 393
 394         status = acpi_ds_build_internal_object(walk_state, op->common.value.arg,
 395                                                &obj_desc);
 396         if (ACPI_FAILURE(status)) {
 397                 return_ACPI_STATUS(status);
 398         }
 399
 400         /* Re-type the object according to its argument */
 401
 402         node->type = ACPI_GET_OBJECT_TYPE(obj_desc);
 403
 404         /* Attach obj to node */
 405
 406         status = acpi_ns_attach_object(node, obj_desc, node->type);
 407
 408         /* Remove local reference to the object */
 409
 410         acpi_ut_remove_reference(obj_desc);
 411         return_ACPI_STATUS(status);
 412 }
 413
 414 #endif                          /* ACPI_NO_METHOD_EXECUTION */
 415
 416 /*******************************************************************************
 417  *
 418  * FUNCTION:    acpi_ds_init_object_from_op
 419  *
 420  * PARAMETERS:  walk_state      - Current walk state
 421  *              Op              - Parser op used to init the internal object
 422  *              Opcode          - AML opcode associated with the object
 423  *              ret_obj_desc    - Namespace object to be initialized
 424  *
 425  * RETURN:      Status
 426  *
 427  * DESCRIPTION: Initialize a namespace object from a parser Op and its
 428  *              associated arguments.  The namespace object is a more compact
 429  *              representation of the Op and its arguments.
 430  *
 431  ******************************************************************************/
 432
 433 acpi_status
 434 acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
 435                             union acpi_parse_object *op,
 436                             u16 opcode,
 437                             union acpi_operand_object **ret_obj_desc)
 438 {
 439         const struct acpi_opcode_info *op_info;
 440         union acpi_operand_object *obj_desc;
 441         acpi_status status = AE_OK;
 442
 443         ACPI_FUNCTION_TRACE("ds_init_object_from_op");
 444
 445         obj_desc = *ret_obj_desc;
 446         op_info = acpi_ps_get_opcode_info(opcode);
 447         if (op_info->class == AML_CLASS_UNKNOWN) {
 448                 /* Unknown opcode */
 449
 450                 return_ACPI_STATUS(AE_TYPE);
 451         }
 452
 453         /* Perform per-object initialization */
 454
 455         switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
 456         case ACPI_TYPE_BUFFER:
 457
 458                 /*
 459                  * Defer evaluation of Buffer term_arg operand
 460                  */
 461                 obj_desc->buffer.node = (struct acpi_namespace_node *)
 462                     walk_state->operands[0];
 463                 obj_desc->buffer.aml_start = op->named.data;
 464                 obj_desc->buffer.aml_length = op->named.length;
 465                 break;
 466
 467         case ACPI_TYPE_PACKAGE:
 468
 469                 /*
 470                  * Defer evaluation of Package term_arg operand
 471                  */
 472                 obj_desc->package.node = (struct acpi_namespace_node *)
 473                     walk_state->operands[0];
 474                 obj_desc->package.aml_start = op->named.data;
 475                 obj_desc->package.aml_length = op->named.length;
 476                 break;
 477
 478         case ACPI_TYPE_INTEGER:
 479
 480                 switch (op_info->type) {
 481                 case AML_TYPE_CONSTANT:
 482                         /*
 483                          * Resolve AML Constants here - AND ONLY HERE!
 484                          * All constants are integers.
 485                          * We mark the integer with a flag that indicates that it started
 486                          * life as a constant -- so that stores to constants will perform
 487                          * as expected (noop). zero_op is used as a placeholder for optional
 488                          * target operands.
 489                          */
 490                         obj_desc->common.flags = AOPOBJ_AML_CONSTANT;
 491
 492                         switch (opcode) {
 493                         case AML_ZERO_OP:
 494
 495                                 obj_desc->integer.value = 0;
 496                                 break;
 497
 498                         case AML_ONE_OP:
 499
 500                                 obj_desc->integer.value = 1;
 501                                 break;
 502
 503                         case AML_ONES_OP:
 504
 505                                 obj_desc->integer.value = ACPI_INTEGER_MAX;
 506
 507                                 /* Truncate value if we are executing from a 32-bit ACPI table */
 508
 509 #ifndef ACPI_NO_METHOD_EXECUTION
 510                                 acpi_ex_truncate_for32bit_table(obj_desc);
 511 #endif
 512                                 break;
 513
 514                         case AML_REVISION_OP:
 515
 516                                 obj_desc->integer.value = ACPI_CA_VERSION;
 517                                 break;
 518
 519                         default:
 520
 521                                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 522                                                   "Unknown constant opcode %X\n",
 523                                                   opcode));
 524                                 status = AE_AML_OPERAND_TYPE;
 525                                 break;
 526                         }
 527                         break;
 528
 529                 case AML_TYPE_LITERAL:
 530
 531                         obj_desc->integer.value = op->common.value.integer;
 532 #ifndef ACPI_NO_METHOD_EXECUTION
 533                         acpi_ex_truncate_for32bit_table(obj_desc);
 534 #endif
 535                         break;
 536
 537                 default:
 538                         ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 539                                           "Unknown Integer type %X\n",
 540                                           op_info->type));
 541                         status = AE_AML_OPERAND_TYPE;
 542                         break;
 543                 }
 544                 break;
 545
 546         case ACPI_TYPE_STRING:
 547
 548                 obj_desc->string.pointer = op->common.value.string;
 549                 obj_desc->string.length =
 550                     (u32) ACPI_STRLEN(op->common.value.string);
 551
 552                 /*
 553                  * The string is contained in the ACPI table, don't ever try
 554                  * to delete it
 555                  */
 556                 obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
 557                 break;
 558
 559         case ACPI_TYPE_METHOD:
 560                 break;
 561
 562         case ACPI_TYPE_LOCAL_REFERENCE:
 563
 564                 switch (op_info->type) {
 565                 case AML_TYPE_LOCAL_VARIABLE:
 566
 567                         /* Split the opcode into a base opcode + offset */
 568
 569                         obj_desc->reference.opcode = AML_LOCAL_OP;
 570                         obj_desc->reference.offset = opcode - AML_LOCAL_OP;
 571
 572 #ifndef ACPI_NO_METHOD_EXECUTION
 573                         status = acpi_ds_method_data_get_node(AML_LOCAL_OP,
 574                                                               obj_desc->
 575                                                               reference.offset,
 576                                                               walk_state,
 577                                                               (struct
 578                                                                acpi_namespace_node
 579                                                                **)&obj_desc->
 580                                                               reference.object);
 581 #endif
 582                         break;
 583
 584                 case AML_TYPE_METHOD_ARGUMENT:
 585
 586                         /* Split the opcode into a base opcode + offset */
 587
 588                         obj_desc->reference.opcode = AML_ARG_OP;
 589                         obj_desc->reference.offset = opcode - AML_ARG_OP;
 590
 591 #ifndef ACPI_NO_METHOD_EXECUTION
 592                         status = acpi_ds_method_data_get_node(AML_ARG_OP,
 593                                                               obj_desc->
 594                                                               reference.offset,
 595                                                               walk_state,
 596                                                               (struct
 597                                                                acpi_namespace_node
 598                                                                **)&obj_desc->
 599                                                               reference.object);
 600 #endif
 601                         break;
 602
 603                 default:        /* Other literals, etc.. */
 604
 605                         if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
 606                                 /* Node was saved in Op */
 607
 608                                 obj_desc->reference.node = op->common.node;
 609                         }
 610
 611                         obj_desc->reference.opcode = opcode;
 612                         break;
 613                 }
 614                 break;
 615
 616         default:
 617
 618                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 619                                   "Unimplemented data type: %X\n",
 620                                   ACPI_GET_OBJECT_TYPE(obj_desc)));
 621
 622                 status = AE_AML_OPERAND_TYPE;
 623                 break;
 624         }
 625
 626         return_ACPI_STATUS(status);
 627 }