drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21
  22 #include <asm/io.h>
  23
  24 #include <acpi/acpi_bus.h>
  25 #include <acpi/acpi_drivers.h>
  26
  27 #include "internal.h"
  28 #include "sleep.h"
  29
  30 static u8 sleep_states[ACPI_S_STATE_COUNT];
  31
  32 static void acpi_sleep_tts_switch(u32 acpi_state)
  33 {
  34         acpi_status status;
  35
  36         status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
  37         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  38                 /*
  39                  * OS can't evaluate the _TTS object correctly. Some warning
  40                  * message will be printed. But it won't break anything.
  41                  */
  42                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  43         }
  44 }
  45
  46 static int tts_notify_reboot(struct notifier_block *this,
  47                         unsigned long code, void *x)
  48 {
  49         acpi_sleep_tts_switch(ACPI_STATE_S5);
  50         return NOTIFY_DONE;
  51 }
  52
  53 static struct notifier_block tts_notifier = {
  54         .notifier_call  = tts_notify_reboot,
  55         .next           = NULL,
  56         .priority       = 0,
  57 };
  58
  59 static int acpi_sleep_prepare(u32 acpi_state)
  60 {
  61 #ifdef CONFIG_ACPI_SLEEP
  62         /* do we have a wakeup address for S2 and S3? */
  63         if (acpi_state == ACPI_STATE_S3) {
  64                 if (!acpi_wakeup_address)
  65                         return -EFAULT;
  66                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  67
  68         }
  69         ACPI_FLUSH_CPU_CACHE();
  70 #endif
  71         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  72                 acpi_state);
  73         acpi_enable_wakeup_devices(acpi_state);
  74         acpi_enter_sleep_state_prep(acpi_state);
  75         return 0;
  76 }
  77
  78 #ifdef CONFIG_ACPI_SLEEP
  79 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  80
  81 u32 acpi_target_system_state(void)
  82 {
  83         return acpi_target_sleep_state;
  84 }
  85
  86 static bool pwr_btn_event_pending;
  87
  88 /*
  89  * The ACPI specification wants us to save NVS memory regions during hibernation
  90  * and to restore them during the subsequent resume.  Windows does that also for
  91  * suspend to RAM.  However, it is known that this mechanism does not work on
  92  * all machines, so we allow the user to disable it with the help of the
  93  * 'acpi_sleep=nonvs' kernel command line option.
  94  */
  95 static bool nvs_nosave;
  96
  97 void __init acpi_nvs_nosave(void)
  98 {
  99         nvs_nosave = true;
 100 }
 101
 102 /*
 103  * The ACPI specification wants us to save NVS memory regions during hibernation
 104  * but says nothing about saving NVS during S3.  Not all versions of Windows
 105  * save NVS on S3 suspend either, and it is clear that not all systems need
 106  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 107  * user to disable saving NVS on S3 if their system does not require it, but
 108  * continue to save/restore NVS for S4 as specified.
 109  */
 110 static bool nvs_nosave_s3;
 111
 112 void __init acpi_nvs_nosave_s3(void)
 113 {
 114         nvs_nosave_s3 = true;
 115 }
 116
 117 /*
 118  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 119  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 120  * kernel command line option that causes the following variable to be set.
 121  */
 122 static bool old_suspend_ordering;
 123
 124 void __init acpi_old_suspend_ordering(void)
 125 {
 126         old_suspend_ordering = true;
 127 }
 128
 129 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 130 {
 131         acpi_old_suspend_ordering();
 132         return 0;
 133 }
 134
 135 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 136 {
 137         acpi_nvs_nosave();
 138         return 0;
 139 }
 140
 141 static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
 142         {
 143         .callback = init_old_suspend_ordering,
 144         .ident = "Abit KN9 (nForce4 variant)",
 145         .matches = {
 146                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 147                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 148                 },
 149         },
 150         {
 151         .callback = init_old_suspend_ordering,
 152         .ident = "HP xw4600 Workstation",
 153         .matches = {
 154                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 155                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 156                 },
 157         },
 158         {
 159         .callback = init_old_suspend_ordering,
 160         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 161         .matches = {
 162                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 163                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 164                 },
 165         },
 166         {
 167         .callback = init_old_suspend_ordering,
 168         .ident = "Panasonic CF51-2L",
 169         .matches = {
 170                 DMI_MATCH(DMI_BOARD_VENDOR,
 171                                 "Matsushita Electric Industrial Co.,Ltd."),
 172                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 173                 },
 174         },
 175         {
 176         .callback = init_nvs_nosave,
 177         .ident = "Sony Vaio VGN-FW41E_H",
 178         .matches = {
 179                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 180                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
 181                 },
 182         },
 183         {
 184         .callback = init_nvs_nosave,
 185         .ident = "Sony Vaio VGN-FW21E",
 186         .matches = {
 187                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 188                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 189                 },
 190         },
 191         {
 192         .callback = init_nvs_nosave,
 193         .ident = "Sony Vaio VGN-FW21M",
 194         .matches = {
 195                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 196                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
 197                 },
 198         },
 199         {
 200         .callback = init_nvs_nosave,
 201         .ident = "Sony Vaio VPCEB17FX",
 202         .matches = {
 203                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 204                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 205                 },
 206         },
 207         {
 208         .callback = init_nvs_nosave,
 209         .ident = "Sony Vaio VGN-SR11M",
 210         .matches = {
 211                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 212                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 213                 },
 214         },
 215         {
 216         .callback = init_nvs_nosave,
 217         .ident = "Everex StepNote Series",
 218         .matches = {
 219                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 220                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 221                 },
 222         },
 223         {
 224         .callback = init_nvs_nosave,
 225         .ident = "Sony Vaio VPCEB1Z1E",
 226         .matches = {
 227                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 228                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 229                 },
 230         },
 231         {
 232         .callback = init_nvs_nosave,
 233         .ident = "Sony Vaio VGN-NW130D",
 234         .matches = {
 235                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 236                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 237                 },
 238         },
 239         {
 240         .callback = init_nvs_nosave,
 241         .ident = "Sony Vaio VPCCW29FX",
 242         .matches = {
 243                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 244                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 245                 },
 246         },
 247         {
 248         .callback = init_nvs_nosave,
 249         .ident = "Averatec AV1020-ED2",
 250         .matches = {
 251                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 252                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 253                 },
 254         },
 255         {
 256         .callback = init_old_suspend_ordering,
 257         .ident = "Asus A8N-SLI DELUXE",
 258         .matches = {
 259                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 260                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 261                 },
 262         },
 263         {
 264         .callback = init_old_suspend_ordering,
 265         .ident = "Asus A8N-SLI Premium",
 266         .matches = {
 267                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 268                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 269                 },
 270         },
 271         {
 272         .callback = init_nvs_nosave,
 273         .ident = "Sony Vaio VGN-SR26GN_P",
 274         .matches = {
 275                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 276                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 277                 },
 278         },
 279         {
 280         .callback = init_nvs_nosave,
 281         .ident = "Sony Vaio VPCEB1S1E",
 282         .matches = {
 283                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 284                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
 285                 },
 286         },
 287         {
 288         .callback = init_nvs_nosave,
 289         .ident = "Sony Vaio VGN-FW520F",
 290         .matches = {
 291                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 292                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 293                 },
 294         },
 295         {
 296         .callback = init_nvs_nosave,
 297         .ident = "Asus K54C",
 298         .matches = {
 299                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 300                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 301                 },
 302         },
 303         {
 304         .callback = init_nvs_nosave,
 305         .ident = "Asus K54HR",
 306         .matches = {
 307                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 308                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 309                 },
 310         },
 311         {},
 312 };
 313
 314 static void acpi_sleep_dmi_check(void)
 315 {
 316         dmi_check_system(acpisleep_dmi_table);
 317 }
 318
 319 /**
 320  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 321  */
 322 static int acpi_pm_freeze(void)
 323 {
 324         acpi_disable_all_gpes();
 325         acpi_os_wait_events_complete();
 326         acpi_ec_block_transactions();
 327         return 0;
 328 }
 329
 330 /**
 331  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 332  */
 333 static int acpi_pm_pre_suspend(void)
 334 {
 335         acpi_pm_freeze();
 336         return suspend_nvs_save();
 337 }
 338
 339 /**
 340  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 341  *
 342  *      If necessary, set the firmware waking vector and do arch-specific
 343  *      nastiness to get the wakeup code to the waking vector.
 344  */
 345 static int __acpi_pm_prepare(void)
 346 {
 347         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 348         if (error)
 349                 acpi_target_sleep_state = ACPI_STATE_S0;
 350
 351         return error;
 352 }
 353
 354 /**
 355  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 356  *              state and disable the GPEs.
 357  */
 358 static int acpi_pm_prepare(void)
 359 {
 360         int error = __acpi_pm_prepare();
 361         if (!error)
 362                 error = acpi_pm_pre_suspend();
 363
 364         return error;
 365 }
 366
 367 static int find_powerf_dev(struct device *dev, void *data)
 368 {
 369         struct acpi_device *device = to_acpi_device(dev);
 370         const char *hid = acpi_device_hid(device);
 371
 372         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
 373 }
 374
 375 /**
 376  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 377  *
 378  *      This is called after we wake back up (or if entering the sleep state
 379  *      failed).
 380  */
 381 static void acpi_pm_finish(void)
 382 {
 383         struct device *pwr_btn_dev;
 384         u32 acpi_state = acpi_target_sleep_state;
 385
 386         acpi_ec_unblock_transactions();
 387         suspend_nvs_free();
 388
 389         if (acpi_state == ACPI_STATE_S0)
 390                 return;
 391
 392         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 393                 acpi_state);
 394         acpi_disable_wakeup_devices(acpi_state);
 395         acpi_leave_sleep_state(acpi_state);
 396
 397         /* reset firmware waking vector */
 398         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 399
 400         acpi_target_sleep_state = ACPI_STATE_S0;
 401
 402         acpi_resume_power_resources();
 403
 404         /* If we were woken with the fixed power button, provide a small
 405          * hint to userspace in the form of a wakeup event on the fixed power
 406          * button device (if it can be found).
 407          *
 408          * We delay the event generation til now, as the PM layer requires
 409          * timekeeping to be running before we generate events. */
 410         if (!pwr_btn_event_pending)
 411                 return;
 412
 413         pwr_btn_event_pending = false;
 414         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
 415                                       find_powerf_dev);
 416         if (pwr_btn_dev) {
 417                 pm_wakeup_event(pwr_btn_dev, 0);
 418                 put_device(pwr_btn_dev);
 419         }
 420 }
 421
 422 /**
 423  * acpi_pm_start - Start system PM transition.
 424  */
 425 static void acpi_pm_start(u32 acpi_state)
 426 {
 427         acpi_target_sleep_state = acpi_state;
 428         acpi_sleep_tts_switch(acpi_target_sleep_state);
 429         acpi_scan_lock_acquire();
 430 }
 431
 432 /**
 433  * acpi_pm_end - Finish up system PM transition.
 434  */
 435 static void acpi_pm_end(void)
 436 {
 437         acpi_scan_lock_release();
 438         /*
 439          * This is necessary in case acpi_pm_finish() is not called during a
 440          * failing transition to a sleep state.
 441          */
 442         acpi_target_sleep_state = ACPI_STATE_S0;
 443         acpi_sleep_tts_switch(acpi_target_sleep_state);
 444 }
 445 #else /* !CONFIG_ACPI_SLEEP */
 446 #define acpi_target_sleep_state ACPI_STATE_S0
 447 static inline void acpi_sleep_dmi_check(void) {}
 448 #endif /* CONFIG_ACPI_SLEEP */
 449
 450 #ifdef CONFIG_SUSPEND
 451 static u32 acpi_suspend_states[] = {
 452         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 453         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 454         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 455         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 456 };
 457
 458 /**
 459  *      acpi_suspend_begin - Set the target system sleep state to the state
 460  *              associated with given @pm_state, if supported.
 461  */
 462 static int acpi_suspend_begin(suspend_state_t pm_state)
 463 {
 464         u32 acpi_state = acpi_suspend_states[pm_state];
 465         int error;
 466
 467         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 468         if (error)
 469                 return error;
 470
 471         if (!sleep_states[acpi_state]) {
 472                 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
 473                 return -ENOSYS;
 474         }
 475
 476         acpi_pm_start(acpi_state);
 477         return 0;
 478 }
 479
 480 /**
 481  *      acpi_suspend_enter - Actually enter a sleep state.
 482  *      @pm_state: ignored
 483  *
 484  *      Flush caches and go to sleep. For STR we have to call arch-specific
 485  *      assembly, which in turn call acpi_enter_sleep_state().
 486  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 487  */
 488 static int acpi_suspend_enter(suspend_state_t pm_state)
 489 {
 490         acpi_status status = AE_OK;
 491         u32 acpi_state = acpi_target_sleep_state;
 492         int error;
 493
 494         ACPI_FLUSH_CPU_CACHE();
 495
 496         switch (acpi_state) {
 497         case ACPI_STATE_S1:
 498                 barrier();
 499                 status = acpi_enter_sleep_state(acpi_state);
 500                 break;
 501
 502         case ACPI_STATE_S3:
 503                 if (!acpi_suspend_lowlevel)
 504                         return -ENOSYS;
 505                 error = acpi_suspend_lowlevel();
 506                 if (error)
 507                         return error;
 508                 pr_info(PREFIX "Low-level resume complete\n");
 509                 break;
 510         }
 511
 512         /* This violates the spec but is required for bug compatibility. */
 513         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 514
 515         /* Reprogram control registers */
 516         acpi_leave_sleep_state_prep(acpi_state);
 517
 518         /* ACPI 3.0 specs (P62) says that it's the responsibility
 519          * of the OSPM to clear the status bit [ implying that the
 520          * POWER_BUTTON event should not reach userspace ]
 521          *
 522          * However, we do generate a small hint for userspace in the form of
 523          * a wakeup event. We flag this condition for now and generate the
 524          * event later, as we're currently too early in resume to be able to
 525          * generate wakeup events.
 526          */
 527         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
 528                 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
 529
 530                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 531
 532                 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
 533                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 534                         /* Flag for later */
 535                         pwr_btn_event_pending = true;
 536                 }
 537         }
 538
 539         /*
 540          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 541          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 542          * acpi_leave_sleep_state will reenable specific GPEs later
 543          */
 544         acpi_disable_all_gpes();
 545         /* Allow EC transactions to happen. */
 546         acpi_ec_unblock_transactions_early();
 547
 548         suspend_nvs_restore();
 549
 550         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 551 }
 552
 553 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 554 {
 555         u32 acpi_state;
 556
 557         switch (pm_state) {
 558         case PM_SUSPEND_ON:
 559         case PM_SUSPEND_STANDBY:
 560         case PM_SUSPEND_MEM:
 561                 acpi_state = acpi_suspend_states[pm_state];
 562
 563                 return sleep_states[acpi_state];
 564         default:
 565                 return 0;
 566         }
 567 }
 568
 569 static const struct platform_suspend_ops acpi_suspend_ops = {
 570         .valid = acpi_suspend_state_valid,
 571         .begin = acpi_suspend_begin,
 572         .prepare_late = acpi_pm_prepare,
 573         .enter = acpi_suspend_enter,
 574         .wake = acpi_pm_finish,
 575         .end = acpi_pm_end,
 576 };
 577
 578 /**
 579  *      acpi_suspend_begin_old - Set the target system sleep state to the
 580  *              state associated with given @pm_state, if supported, and
 581  *              execute the _PTS control method.  This function is used if the
 582  *              pre-ACPI 2.0 suspend ordering has been requested.
 583  */
 584 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 585 {
 586         int error = acpi_suspend_begin(pm_state);
 587         if (!error)
 588                 error = __acpi_pm_prepare();
 589
 590         return error;
 591 }
 592
 593 /*
 594  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 595  * been requested.
 596  */
 597 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 598         .valid = acpi_suspend_state_valid,
 599         .begin = acpi_suspend_begin_old,
 600         .prepare_late = acpi_pm_pre_suspend,
 601         .enter = acpi_suspend_enter,
 602         .wake = acpi_pm_finish,
 603         .end = acpi_pm_end,
 604         .recover = acpi_pm_finish,
 605 };
 606
 607 static void acpi_sleep_suspend_setup(void)
 608 {
 609         int i;
 610
 611         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 612                 acpi_status status;
 613                 u8 type_a, type_b;
 614
 615                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 616                 if (ACPI_SUCCESS(status)) {
 617                         sleep_states[i] = 1;
 618                 }
 619         }
 620
 621         suspend_set_ops(old_suspend_ordering ?
 622                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 623 }
 624 #else /* !CONFIG_SUSPEND */
 625 static inline void acpi_sleep_suspend_setup(void) {}
 626 #endif /* !CONFIG_SUSPEND */
 627
 628 #ifdef CONFIG_HIBERNATION
 629 static unsigned long s4_hardware_signature;
 630 static struct acpi_table_facs *facs;
 631 static bool nosigcheck;
 632
 633 void __init acpi_no_s4_hw_signature(void)
 634 {
 635         nosigcheck = true;
 636 }
 637
 638 static int acpi_hibernation_begin(void)
 639 {
 640         int error;
 641
 642         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 643         if (!error)
 644                 acpi_pm_start(ACPI_STATE_S4);
 645
 646         return error;
 647 }
 648
 649 static int acpi_hibernation_enter(void)
 650 {
 651         acpi_status status = AE_OK;
 652
 653         ACPI_FLUSH_CPU_CACHE();
 654
 655         /* This shouldn't return.  If it returns, we have a problem */
 656         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 657         /* Reprogram control registers */
 658         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 659
 660         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 661 }
 662
 663 static void acpi_hibernation_leave(void)
 664 {
 665         /*
 666          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 667          * enable it here.
 668          */
 669         acpi_enable();
 670         /* Reprogram control registers */
 671         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 672         /* Check the hardware signature */
 673         if (facs && s4_hardware_signature != facs->hardware_signature) {
 674                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
 675                         "cannot resume!\n");
 676                 panic("ACPI S4 hardware signature mismatch");
 677         }
 678         /* Restore the NVS memory area */
 679         suspend_nvs_restore();
 680         /* Allow EC transactions to happen. */
 681         acpi_ec_unblock_transactions_early();
 682 }
 683
 684 static void acpi_pm_thaw(void)
 685 {
 686         acpi_ec_unblock_transactions();
 687         acpi_enable_all_runtime_gpes();
 688 }
 689
 690 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 691         .begin = acpi_hibernation_begin,
 692         .end = acpi_pm_end,
 693         .pre_snapshot = acpi_pm_prepare,
 694         .finish = acpi_pm_finish,
 695         .prepare = acpi_pm_prepare,
 696         .enter = acpi_hibernation_enter,
 697         .leave = acpi_hibernation_leave,
 698         .pre_restore = acpi_pm_freeze,
 699         .restore_cleanup = acpi_pm_thaw,
 700 };
 701
 702 /**
 703  *      acpi_hibernation_begin_old - Set the target system sleep state to
 704  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 705  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 706  *              requested.
 707  */
 708 static int acpi_hibernation_begin_old(void)
 709 {
 710         int error;
 711         /*
 712          * The _TTS object should always be evaluated before the _PTS object.
 713          * When the old_suspended_ordering is true, the _PTS object is
 714          * evaluated in the acpi_sleep_prepare.
 715          */
 716         acpi_sleep_tts_switch(ACPI_STATE_S4);
 717
 718         error = acpi_sleep_prepare(ACPI_STATE_S4);
 719
 720         if (!error) {
 721                 if (!nvs_nosave)
 722                         error = suspend_nvs_alloc();
 723                 if (!error) {
 724                         acpi_target_sleep_state = ACPI_STATE_S4;
 725                         acpi_scan_lock_acquire();
 726                 }
 727         }
 728         return error;
 729 }
 730
 731 /*
 732  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 733  * been requested.
 734  */
 735 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 736         .begin = acpi_hibernation_begin_old,
 737         .end = acpi_pm_end,
 738         .pre_snapshot = acpi_pm_pre_suspend,
 739         .prepare = acpi_pm_freeze,
 740         .finish = acpi_pm_finish,
 741         .enter = acpi_hibernation_enter,
 742         .leave = acpi_hibernation_leave,
 743         .pre_restore = acpi_pm_freeze,
 744         .restore_cleanup = acpi_pm_thaw,
 745         .recover = acpi_pm_finish,
 746 };
 747
 748 static void acpi_sleep_hibernate_setup(void)
 749 {
 750         acpi_status status;
 751         u8 type_a, type_b;
 752
 753         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 754         if (ACPI_FAILURE(status))
 755                 return;
 756
 757         hibernation_set_ops(old_suspend_ordering ?
 758                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 759         sleep_states[ACPI_STATE_S4] = 1;
 760         if (nosigcheck)
 761                 return;
 762
 763         acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
 764         if (facs)
 765                 s4_hardware_signature = facs->hardware_signature;
 766 }
 767 #else /* !CONFIG_HIBERNATION */
 768 static inline void acpi_sleep_hibernate_setup(void) {}
 769 #endif /* !CONFIG_HIBERNATION */
 770
 771 int acpi_suspend(u32 acpi_state)
 772 {
 773         suspend_state_t states[] = {
 774                 [1] = PM_SUSPEND_STANDBY,
 775                 [3] = PM_SUSPEND_MEM,
 776                 [5] = PM_SUSPEND_MAX
 777         };
 778
 779         if (acpi_state < 6 && states[acpi_state])
 780                 return pm_suspend(states[acpi_state]);
 781         if (acpi_state == 4)
 782                 return hibernate();
 783         return -EINVAL;
 784 }
 785
 786 static void acpi_power_off_prepare(void)
 787 {
 788         /* Prepare to power off the system */
 789         acpi_sleep_prepare(ACPI_STATE_S5);
 790         acpi_disable_all_gpes();
 791 }
 792
 793 static void acpi_power_off(void)
 794 {
 795         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 796         printk(KERN_DEBUG "%s called\n", __func__);
 797         local_irq_disable();
 798         acpi_enter_sleep_state(ACPI_STATE_S5);
 799 }
 800
 801 int __init acpi_sleep_init(void)
 802 {
 803         acpi_status status;
 804         u8 type_a, type_b;
 805         char supported[ACPI_S_STATE_COUNT * 3 + 1];
 806         char *pos = supported;
 807         int i;
 808
 809         if (acpi_disabled)
 810                 return 0;
 811
 812         acpi_sleep_dmi_check();
 813
 814         sleep_states[ACPI_STATE_S0] = 1;
 815
 816         acpi_sleep_suspend_setup();
 817         acpi_sleep_hibernate_setup();
 818
 819         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 820         if (ACPI_SUCCESS(status)) {
 821                 sleep_states[ACPI_STATE_S5] = 1;
 822                 pm_power_off_prepare = acpi_power_off_prepare;
 823                 pm_power_off = acpi_power_off;
 824         }
 825
 826         supported[0] = 0;
 827         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
 828                 if (sleep_states[i])
 829                         pos += sprintf(pos, " S%d", i);
 830         }
 831         pr_info(PREFIX "(supports%s)\n", supported);
 832
 833         /*
 834          * Register the tts_notifier to reboot notifier list so that the _TTS
 835          * object can also be evaluated when the system enters S5.
 836          */
 837         register_reboot_notifier(&tts_notifier);
 838         return 0;
 839 }