drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21 #include <asm/io.h>
  22
  23 #include "internal.h"
  24 #include "sleep.h"
  25
  26 static u8 sleep_states[ACPI_S_STATE_COUNT];
  27
  28 static void acpi_sleep_tts_switch(u32 acpi_state)
  29 {
  30         acpi_status status;
  31
  32         status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
  33         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  34                 /*
  35                  * OS can't evaluate the _TTS object correctly. Some warning
  36                  * message will be printed. But it won't break anything.
  37                  */
  38                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  39         }
  40 }
  41
  42 static int tts_notify_reboot(struct notifier_block *this,
  43                         unsigned long code, void *x)
  44 {
  45         acpi_sleep_tts_switch(ACPI_STATE_S5);
  46         return NOTIFY_DONE;
  47 }
  48
  49 static struct notifier_block tts_notifier = {
  50         .notifier_call  = tts_notify_reboot,
  51         .next           = NULL,
  52         .priority       = 0,
  53 };
  54
  55 static int acpi_sleep_prepare(u32 acpi_state)
  56 {
  57 #ifdef CONFIG_ACPI_SLEEP
  58         /* do we have a wakeup address for S2 and S3? */
  59         if (acpi_state == ACPI_STATE_S3) {
  60                 if (!acpi_wakeup_address)
  61                         return -EFAULT;
  62                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  63
  64         }
  65         ACPI_FLUSH_CPU_CACHE();
  66 #endif
  67         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  68                 acpi_state);
  69         acpi_enable_wakeup_devices(acpi_state);
  70         acpi_enter_sleep_state_prep(acpi_state);
  71         return 0;
  72 }
  73
  74 #ifdef CONFIG_ACPI_SLEEP
  75 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  76
  77 u32 acpi_target_system_state(void)
  78 {
  79         return acpi_target_sleep_state;
  80 }
  81
  82 static bool pwr_btn_event_pending;
  83
  84 /*
  85  * The ACPI specification wants us to save NVS memory regions during hibernation
  86  * and to restore them during the subsequent resume.  Windows does that also for
  87  * suspend to RAM.  However, it is known that this mechanism does not work on
  88  * all machines, so we allow the user to disable it with the help of the
  89  * 'acpi_sleep=nonvs' kernel command line option.
  90  */
  91 static bool nvs_nosave;
  92
  93 void __init acpi_nvs_nosave(void)
  94 {
  95         nvs_nosave = true;
  96 }
  97
  98 /*
  99  * The ACPI specification wants us to save NVS memory regions during hibernation
 100  * but says nothing about saving NVS during S3.  Not all versions of Windows
 101  * save NVS on S3 suspend either, and it is clear that not all systems need
 102  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 103  * user to disable saving NVS on S3 if their system does not require it, but
 104  * continue to save/restore NVS for S4 as specified.
 105  */
 106 static bool nvs_nosave_s3;
 107
 108 void __init acpi_nvs_nosave_s3(void)
 109 {
 110         nvs_nosave_s3 = true;
 111 }
 112
 113 /*
 114  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 115  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 116  * kernel command line option that causes the following variable to be set.
 117  */
 118 static bool old_suspend_ordering;
 119
 120 void __init acpi_old_suspend_ordering(void)
 121 {
 122         old_suspend_ordering = true;
 123 }
 124
 125 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 126 {
 127         acpi_old_suspend_ordering();
 128         return 0;
 129 }
 130
 131 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 132 {
 133         acpi_nvs_nosave();
 134         return 0;
 135 }
 136
 137 static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
 138         {
 139         .callback = init_old_suspend_ordering,
 140         .ident = "Abit KN9 (nForce4 variant)",
 141         .matches = {
 142                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 143                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 144                 },
 145         },
 146         {
 147         .callback = init_old_suspend_ordering,
 148         .ident = "HP xw4600 Workstation",
 149         .matches = {
 150                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 151                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 152                 },
 153         },
 154         {
 155         .callback = init_old_suspend_ordering,
 156         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 157         .matches = {
 158                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 159                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 160                 },
 161         },
 162         {
 163         .callback = init_old_suspend_ordering,
 164         .ident = "Panasonic CF51-2L",
 165         .matches = {
 166                 DMI_MATCH(DMI_BOARD_VENDOR,
 167                                 "Matsushita Electric Industrial Co.,Ltd."),
 168                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 169                 },
 170         },
 171         {
 172         .callback = init_nvs_nosave,
 173         .ident = "Sony Vaio VGN-FW41E_H",
 174         .matches = {
 175                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 176                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
 177                 },
 178         },
 179         {
 180         .callback = init_nvs_nosave,
 181         .ident = "Sony Vaio VGN-FW21E",
 182         .matches = {
 183                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 184                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 185                 },
 186         },
 187         {
 188         .callback = init_nvs_nosave,
 189         .ident = "Sony Vaio VGN-FW21M",
 190         .matches = {
 191                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 192                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
 193                 },
 194         },
 195         {
 196         .callback = init_nvs_nosave,
 197         .ident = "Sony Vaio VPCEB17FX",
 198         .matches = {
 199                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 200                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 201                 },
 202         },
 203         {
 204         .callback = init_nvs_nosave,
 205         .ident = "Sony Vaio VGN-SR11M",
 206         .matches = {
 207                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 208                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 209                 },
 210         },
 211         {
 212         .callback = init_nvs_nosave,
 213         .ident = "Everex StepNote Series",
 214         .matches = {
 215                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 216                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 217                 },
 218         },
 219         {
 220         .callback = init_nvs_nosave,
 221         .ident = "Sony Vaio VPCEB1Z1E",
 222         .matches = {
 223                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 224                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 225                 },
 226         },
 227         {
 228         .callback = init_nvs_nosave,
 229         .ident = "Sony Vaio VGN-NW130D",
 230         .matches = {
 231                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 232                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 233                 },
 234         },
 235         {
 236         .callback = init_nvs_nosave,
 237         .ident = "Sony Vaio VPCCW29FX",
 238         .matches = {
 239                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 240                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 241                 },
 242         },
 243         {
 244         .callback = init_nvs_nosave,
 245         .ident = "Averatec AV1020-ED2",
 246         .matches = {
 247                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 248                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 249                 },
 250         },
 251         {
 252         .callback = init_old_suspend_ordering,
 253         .ident = "Asus A8N-SLI DELUXE",
 254         .matches = {
 255                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 256                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 257                 },
 258         },
 259         {
 260         .callback = init_old_suspend_ordering,
 261         .ident = "Asus A8N-SLI Premium",
 262         .matches = {
 263                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 264                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 265                 },
 266         },
 267         {
 268         .callback = init_nvs_nosave,
 269         .ident = "Sony Vaio VGN-SR26GN_P",
 270         .matches = {
 271                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 272                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 273                 },
 274         },
 275         {
 276         .callback = init_nvs_nosave,
 277         .ident = "Sony Vaio VPCEB1S1E",
 278         .matches = {
 279                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 280                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
 281                 },
 282         },
 283         {
 284         .callback = init_nvs_nosave,
 285         .ident = "Sony Vaio VGN-FW520F",
 286         .matches = {
 287                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 288                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 289                 },
 290         },
 291         {
 292         .callback = init_nvs_nosave,
 293         .ident = "Asus K54C",
 294         .matches = {
 295                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 296                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 297                 },
 298         },
 299         {
 300         .callback = init_nvs_nosave,
 301         .ident = "Asus K54HR",
 302         .matches = {
 303                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 304                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 305                 },
 306         },
 307         {},
 308 };
 309
 310 static void acpi_sleep_dmi_check(void)
 311 {
 312         dmi_check_system(acpisleep_dmi_table);
 313 }
 314
 315 /**
 316  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 317  */
 318 static int acpi_pm_freeze(void)
 319 {
 320         acpi_disable_all_gpes();
 321         acpi_os_wait_events_complete();
 322         acpi_ec_block_transactions();
 323         return 0;
 324 }
 325
 326 /**
 327  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 328  */
 329 static int acpi_pm_pre_suspend(void)
 330 {
 331         acpi_pm_freeze();
 332         return suspend_nvs_save();
 333 }
 334
 335 /**
 336  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 337  *
 338  *      If necessary, set the firmware waking vector and do arch-specific
 339  *      nastiness to get the wakeup code to the waking vector.
 340  */
 341 static int __acpi_pm_prepare(void)
 342 {
 343         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 344         if (error)
 345                 acpi_target_sleep_state = ACPI_STATE_S0;
 346
 347         return error;
 348 }
 349
 350 /**
 351  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 352  *              state and disable the GPEs.
 353  */
 354 static int acpi_pm_prepare(void)
 355 {
 356         int error = __acpi_pm_prepare();
 357         if (!error)
 358                 error = acpi_pm_pre_suspend();
 359
 360         return error;
 361 }
 362
 363 static int find_powerf_dev(struct device *dev, void *data)
 364 {
 365         struct acpi_device *device = to_acpi_device(dev);
 366         const char *hid = acpi_device_hid(device);
 367
 368         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
 369 }
 370
 371 /**
 372  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 373  *
 374  *      This is called after we wake back up (or if entering the sleep state
 375  *      failed).
 376  */
 377 static void acpi_pm_finish(void)
 378 {
 379         struct device *pwr_btn_dev;
 380         u32 acpi_state = acpi_target_sleep_state;
 381
 382         acpi_ec_unblock_transactions();
 383         suspend_nvs_free();
 384
 385         if (acpi_state == ACPI_STATE_S0)
 386                 return;
 387
 388         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 389                 acpi_state);
 390         acpi_disable_wakeup_devices(acpi_state);
 391         acpi_leave_sleep_state(acpi_state);
 392
 393         /* reset firmware waking vector */
 394         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 395
 396         acpi_target_sleep_state = ACPI_STATE_S0;
 397
 398         acpi_resume_power_resources();
 399
 400         /* If we were woken with the fixed power button, provide a small
 401          * hint to userspace in the form of a wakeup event on the fixed power
 402          * button device (if it can be found).
 403          *
 404          * We delay the event generation til now, as the PM layer requires
 405          * timekeeping to be running before we generate events. */
 406         if (!pwr_btn_event_pending)
 407                 return;
 408
 409         pwr_btn_event_pending = false;
 410         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
 411                                       find_powerf_dev);
 412         if (pwr_btn_dev) {
 413                 pm_wakeup_event(pwr_btn_dev, 0);
 414                 put_device(pwr_btn_dev);
 415         }
 416 }
 417
 418 /**
 419  * acpi_pm_start - Start system PM transition.
 420  */
 421 static void acpi_pm_start(u32 acpi_state)
 422 {
 423         acpi_target_sleep_state = acpi_state;
 424         acpi_sleep_tts_switch(acpi_target_sleep_state);
 425         acpi_scan_lock_acquire();
 426 }
 427
 428 /**
 429  * acpi_pm_end - Finish up system PM transition.
 430  */
 431 static void acpi_pm_end(void)
 432 {
 433         acpi_scan_lock_release();
 434         /*
 435          * This is necessary in case acpi_pm_finish() is not called during a
 436          * failing transition to a sleep state.
 437          */
 438         acpi_target_sleep_state = ACPI_STATE_S0;
 439         acpi_sleep_tts_switch(acpi_target_sleep_state);
 440 }
 441 #else /* !CONFIG_ACPI_SLEEP */
 442 #define acpi_target_sleep_state ACPI_STATE_S0
 443 static inline void acpi_sleep_dmi_check(void) {}
 444 #endif /* CONFIG_ACPI_SLEEP */
 445
 446 #ifdef CONFIG_SUSPEND
 447 static u32 acpi_suspend_states[] = {
 448         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 449         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 450         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 451         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 452 };
 453
 454 /**
 455  *      acpi_suspend_begin - Set the target system sleep state to the state
 456  *              associated with given @pm_state, if supported.
 457  */
 458 static int acpi_suspend_begin(suspend_state_t pm_state)
 459 {
 460         u32 acpi_state = acpi_suspend_states[pm_state];
 461         int error;
 462
 463         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 464         if (error)
 465                 return error;
 466
 467         if (!sleep_states[acpi_state]) {
 468                 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
 469                 return -ENOSYS;
 470         }
 471
 472         acpi_pm_start(acpi_state);
 473         return 0;
 474 }
 475
 476 /**
 477  *      acpi_suspend_enter - Actually enter a sleep state.
 478  *      @pm_state: ignored
 479  *
 480  *      Flush caches and go to sleep. For STR we have to call arch-specific
 481  *      assembly, which in turn call acpi_enter_sleep_state().
 482  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 483  */
 484 static int acpi_suspend_enter(suspend_state_t pm_state)
 485 {
 486         acpi_status status = AE_OK;
 487         u32 acpi_state = acpi_target_sleep_state;
 488         int error;
 489
 490         ACPI_FLUSH_CPU_CACHE();
 491
 492         switch (acpi_state) {
 493         case ACPI_STATE_S1:
 494                 barrier();
 495                 status = acpi_enter_sleep_state(acpi_state);
 496                 break;
 497
 498         case ACPI_STATE_S3:
 499                 if (!acpi_suspend_lowlevel)
 500                         return -ENOSYS;
 501                 error = acpi_suspend_lowlevel();
 502                 if (error)
 503                         return error;
 504                 pr_info(PREFIX "Low-level resume complete\n");
 505                 break;
 506         }
 507
 508         /* This violates the spec but is required for bug compatibility. */
 509         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 510
 511         /* Reprogram control registers */
 512         acpi_leave_sleep_state_prep(acpi_state);
 513
 514         /* ACPI 3.0 specs (P62) says that it's the responsibility
 515          * of the OSPM to clear the status bit [ implying that the
 516          * POWER_BUTTON event should not reach userspace ]
 517          *
 518          * However, we do generate a small hint for userspace in the form of
 519          * a wakeup event. We flag this condition for now and generate the
 520          * event later, as we're currently too early in resume to be able to
 521          * generate wakeup events.
 522          */
 523         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
 524                 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
 525
 526                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 527
 528                 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
 529                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 530                         /* Flag for later */
 531                         pwr_btn_event_pending = true;
 532                 }
 533         }
 534
 535         /*
 536          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 537          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 538          * acpi_leave_sleep_state will reenable specific GPEs later
 539          */
 540         acpi_disable_all_gpes();
 541         /* Allow EC transactions to happen. */
 542         acpi_ec_unblock_transactions_early();
 543
 544         suspend_nvs_restore();
 545
 546         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 547 }
 548
 549 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 550 {
 551         u32 acpi_state;
 552
 553         switch (pm_state) {
 554         case PM_SUSPEND_ON:
 555         case PM_SUSPEND_STANDBY:
 556         case PM_SUSPEND_MEM:
 557                 acpi_state = acpi_suspend_states[pm_state];
 558
 559                 return sleep_states[acpi_state];
 560         default:
 561                 return 0;
 562         }
 563 }
 564
 565 static const struct platform_suspend_ops acpi_suspend_ops = {
 566         .valid = acpi_suspend_state_valid,
 567         .begin = acpi_suspend_begin,
 568         .prepare_late = acpi_pm_prepare,
 569         .enter = acpi_suspend_enter,
 570         .wake = acpi_pm_finish,
 571         .end = acpi_pm_end,
 572 };
 573
 574 /**
 575  *      acpi_suspend_begin_old - Set the target system sleep state to the
 576  *              state associated with given @pm_state, if supported, and
 577  *              execute the _PTS control method.  This function is used if the
 578  *              pre-ACPI 2.0 suspend ordering has been requested.
 579  */
 580 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 581 {
 582         int error = acpi_suspend_begin(pm_state);
 583         if (!error)
 584                 error = __acpi_pm_prepare();
 585
 586         return error;
 587 }
 588
 589 /*
 590  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 591  * been requested.
 592  */
 593 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 594         .valid = acpi_suspend_state_valid,
 595         .begin = acpi_suspend_begin_old,
 596         .prepare_late = acpi_pm_pre_suspend,
 597         .enter = acpi_suspend_enter,
 598         .wake = acpi_pm_finish,
 599         .end = acpi_pm_end,
 600         .recover = acpi_pm_finish,
 601 };
 602
 603 static void acpi_sleep_suspend_setup(void)
 604 {
 605         int i;
 606
 607         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 608                 acpi_status status;
 609                 u8 type_a, type_b;
 610
 611                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 612                 if (ACPI_SUCCESS(status)) {
 613                         sleep_states[i] = 1;
 614                 }
 615         }
 616
 617         suspend_set_ops(old_suspend_ordering ?
 618                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 619 }
 620 #else /* !CONFIG_SUSPEND */
 621 static inline void acpi_sleep_suspend_setup(void) {}
 622 #endif /* !CONFIG_SUSPEND */
 623
 624 #ifdef CONFIG_HIBERNATION
 625 static unsigned long s4_hardware_signature;
 626 static struct acpi_table_facs *facs;
 627 static bool nosigcheck;
 628
 629 void __init acpi_no_s4_hw_signature(void)
 630 {
 631         nosigcheck = true;
 632 }
 633
 634 static int acpi_hibernation_begin(void)
 635 {
 636         int error;
 637
 638         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 639         if (!error)
 640                 acpi_pm_start(ACPI_STATE_S4);
 641
 642         return error;
 643 }
 644
 645 static int acpi_hibernation_enter(void)
 646 {
 647         acpi_status status = AE_OK;
 648
 649         ACPI_FLUSH_CPU_CACHE();
 650
 651         /* This shouldn't return.  If it returns, we have a problem */
 652         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 653         /* Reprogram control registers */
 654         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 655
 656         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 657 }
 658
 659 static void acpi_hibernation_leave(void)
 660 {
 661         /*
 662          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 663          * enable it here.
 664          */
 665         acpi_enable();
 666         /* Reprogram control registers */
 667         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 668         /* Check the hardware signature */
 669         if (facs && s4_hardware_signature != facs->hardware_signature)
 670                 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
 671         /* Restore the NVS memory area */
 672         suspend_nvs_restore();
 673         /* Allow EC transactions to happen. */
 674         acpi_ec_unblock_transactions_early();
 675 }
 676
 677 static void acpi_pm_thaw(void)
 678 {
 679         acpi_ec_unblock_transactions();
 680         acpi_enable_all_runtime_gpes();
 681 }
 682
 683 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 684         .begin = acpi_hibernation_begin,
 685         .end = acpi_pm_end,
 686         .pre_snapshot = acpi_pm_prepare,
 687         .finish = acpi_pm_finish,
 688         .prepare = acpi_pm_prepare,
 689         .enter = acpi_hibernation_enter,
 690         .leave = acpi_hibernation_leave,
 691         .pre_restore = acpi_pm_freeze,
 692         .restore_cleanup = acpi_pm_thaw,
 693 };
 694
 695 /**
 696  *      acpi_hibernation_begin_old - Set the target system sleep state to
 697  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 698  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 699  *              requested.
 700  */
 701 static int acpi_hibernation_begin_old(void)
 702 {
 703         int error;
 704         /*
 705          * The _TTS object should always be evaluated before the _PTS object.
 706          * When the old_suspended_ordering is true, the _PTS object is
 707          * evaluated in the acpi_sleep_prepare.
 708          */
 709         acpi_sleep_tts_switch(ACPI_STATE_S4);
 710
 711         error = acpi_sleep_prepare(ACPI_STATE_S4);
 712
 713         if (!error) {
 714                 if (!nvs_nosave)
 715                         error = suspend_nvs_alloc();
 716                 if (!error) {
 717                         acpi_target_sleep_state = ACPI_STATE_S4;
 718                         acpi_scan_lock_acquire();
 719                 }
 720         }
 721         return error;
 722 }
 723
 724 /*
 725  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 726  * been requested.
 727  */
 728 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 729         .begin = acpi_hibernation_begin_old,
 730         .end = acpi_pm_end,
 731         .pre_snapshot = acpi_pm_pre_suspend,
 732         .prepare = acpi_pm_freeze,
 733         .finish = acpi_pm_finish,
 734         .enter = acpi_hibernation_enter,
 735         .leave = acpi_hibernation_leave,
 736         .pre_restore = acpi_pm_freeze,
 737         .restore_cleanup = acpi_pm_thaw,
 738         .recover = acpi_pm_finish,
 739 };
 740
 741 static void acpi_sleep_hibernate_setup(void)
 742 {
 743         acpi_status status;
 744         u8 type_a, type_b;
 745
 746         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 747         if (ACPI_FAILURE(status))
 748                 return;
 749
 750         hibernation_set_ops(old_suspend_ordering ?
 751                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 752         sleep_states[ACPI_STATE_S4] = 1;
 753         if (nosigcheck)
 754                 return;
 755
 756         acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
 757         if (facs)
 758                 s4_hardware_signature = facs->hardware_signature;
 759 }
 760 #else /* !CONFIG_HIBERNATION */
 761 static inline void acpi_sleep_hibernate_setup(void) {}
 762 #endif /* !CONFIG_HIBERNATION */
 763
 764 int acpi_suspend(u32 acpi_state)
 765 {
 766         suspend_state_t states[] = {
 767                 [1] = PM_SUSPEND_STANDBY,
 768                 [3] = PM_SUSPEND_MEM,
 769                 [5] = PM_SUSPEND_MAX
 770         };
 771
 772         if (acpi_state < 6 && states[acpi_state])
 773                 return pm_suspend(states[acpi_state]);
 774         if (acpi_state == 4)
 775                 return hibernate();
 776         return -EINVAL;
 777 }
 778
 779 static void acpi_power_off_prepare(void)
 780 {
 781         /* Prepare to power off the system */
 782         acpi_sleep_prepare(ACPI_STATE_S5);
 783         acpi_disable_all_gpes();
 784 }
 785
 786 static void acpi_power_off(void)
 787 {
 788         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 789         printk(KERN_DEBUG "%s called\n", __func__);
 790         local_irq_disable();
 791         acpi_enter_sleep_state(ACPI_STATE_S5);
 792 }
 793
 794 int __init acpi_sleep_init(void)
 795 {
 796         acpi_status status;
 797         u8 type_a, type_b;
 798         char supported[ACPI_S_STATE_COUNT * 3 + 1];
 799         char *pos = supported;
 800         int i;
 801
 802         acpi_sleep_dmi_check();
 803
 804         sleep_states[ACPI_STATE_S0] = 1;
 805
 806         acpi_sleep_suspend_setup();
 807         acpi_sleep_hibernate_setup();
 808
 809         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 810         if (ACPI_SUCCESS(status)) {
 811                 sleep_states[ACPI_STATE_S5] = 1;
 812                 pm_power_off_prepare = acpi_power_off_prepare;
 813                 pm_power_off = acpi_power_off;
 814         }
 815
 816         supported[0] = 0;
 817         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
 818                 if (sleep_states[i])
 819                         pos += sprintf(pos, " S%d", i);
 820         }
 821         pr_info(PREFIX "(supports%s)\n", supported);
 822
 823         /*
 824          * Register the tts_notifier to reboot notifier list so that the _TTS
 825          * object can also be evaluated when the system enters S5.
 826          */
 827         register_reboot_notifier(&tts_notifier);
 828         return 0;
 829 }