drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21 #include <linux/pm_runtime.h>
  22
  23 #include <asm/io.h>
  24
  25 #include <acpi/acpi_bus.h>
  26 #include <acpi/acpi_drivers.h>
  27
  28 #include "internal.h"
  29 #include "sleep.h"
  30
  31 u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS;
  32 static unsigned int gts, bfs;
  33 static int set_param_wake_flag(const char *val, struct kernel_param *kp)
  34 {
  35         int ret = param_set_int(val, kp);
  36
  37         if (ret)
  38                 return ret;
  39
  40         if (kp->arg == (const char *)&gts) {
  41                 if (gts)
  42                         wake_sleep_flags |= ACPI_EXECUTE_GTS;
  43                 else
  44                         wake_sleep_flags &= ~ACPI_EXECUTE_GTS;
  45         }
  46         if (kp->arg == (const char *)&bfs) {
  47                 if (bfs)
  48                         wake_sleep_flags |= ACPI_EXECUTE_BFS;
  49                 else
  50                         wake_sleep_flags &= ~ACPI_EXECUTE_BFS;
  51         }
  52         return ret;
  53 }
  54 module_param_call(gts, set_param_wake_flag, param_get_int, &gts, 0644);
  55 module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644);
  56 MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
  57 MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
  58
  59 static u8 sleep_states[ACPI_S_STATE_COUNT];
  60
  61 static void acpi_sleep_tts_switch(u32 acpi_state)
  62 {
  63         union acpi_object in_arg = { ACPI_TYPE_INTEGER };
  64         struct acpi_object_list arg_list = { 1, &in_arg };
  65         acpi_status status = AE_OK;
  66
  67         in_arg.integer.value = acpi_state;
  68         status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
  69         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  70                 /*
  71                  * OS can't evaluate the _TTS object correctly. Some warning
  72                  * message will be printed. But it won't break anything.
  73                  */
  74                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  75         }
  76 }
  77
  78 static int tts_notify_reboot(struct notifier_block *this,
  79                         unsigned long code, void *x)
  80 {
  81         acpi_sleep_tts_switch(ACPI_STATE_S5);
  82         return NOTIFY_DONE;
  83 }
  84
  85 static struct notifier_block tts_notifier = {
  86         .notifier_call  = tts_notify_reboot,
  87         .next           = NULL,
  88         .priority       = 0,
  89 };
  90
  91 static int acpi_sleep_prepare(u32 acpi_state)
  92 {
  93 #ifdef CONFIG_ACPI_SLEEP
  94         /* do we have a wakeup address for S2 and S3? */
  95         if (acpi_state == ACPI_STATE_S3) {
  96                 if (!acpi_wakeup_address) {
  97                         return -EFAULT;
  98                 }
  99                 acpi_set_firmware_waking_vector(
 100                                 (acpi_physical_address)acpi_wakeup_address);
 101
 102         }
 103         ACPI_FLUSH_CPU_CACHE();
 104 #endif
 105         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
 106                 acpi_state);
 107         acpi_enable_wakeup_devices(acpi_state);
 108         acpi_enter_sleep_state_prep(acpi_state);
 109         return 0;
 110 }
 111
 112 #ifdef CONFIG_ACPI_SLEEP
 113 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 114
 115 /*
 116  * The ACPI specification wants us to save NVS memory regions during hibernation
 117  * and to restore them during the subsequent resume.  Windows does that also for
 118  * suspend to RAM.  However, it is known that this mechanism does not work on
 119  * all machines, so we allow the user to disable it with the help of the
 120  * 'acpi_sleep=nonvs' kernel command line option.
 121  */
 122 static bool nvs_nosave;
 123
 124 void __init acpi_nvs_nosave(void)
 125 {
 126         nvs_nosave = true;
 127 }
 128
 129 /*
 130  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 131  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 132  * kernel command line option that causes the following variable to be set.
 133  */
 134 static bool old_suspend_ordering;
 135
 136 void __init acpi_old_suspend_ordering(void)
 137 {
 138         old_suspend_ordering = true;
 139 }
 140
 141 /**
 142  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 143  */
 144 static int acpi_pm_freeze(void)
 145 {
 146         acpi_disable_all_gpes();
 147         acpi_os_wait_events_complete(NULL);
 148         acpi_ec_block_transactions();
 149         return 0;
 150 }
 151
 152 /**
 153  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 154  */
 155 static int acpi_pm_pre_suspend(void)
 156 {
 157         acpi_pm_freeze();
 158         return suspend_nvs_save();
 159 }
 160
 161 /**
 162  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 163  *
 164  *      If necessary, set the firmware waking vector and do arch-specific
 165  *      nastiness to get the wakeup code to the waking vector.
 166  */
 167 static int __acpi_pm_prepare(void)
 168 {
 169         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 170         if (error)
 171                 acpi_target_sleep_state = ACPI_STATE_S0;
 172
 173         return error;
 174 }
 175
 176 /**
 177  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 178  *              state and disable the GPEs.
 179  */
 180 static int acpi_pm_prepare(void)
 181 {
 182         int error = __acpi_pm_prepare();
 183         if (!error)
 184                 error = acpi_pm_pre_suspend();
 185
 186         return error;
 187 }
 188
 189 /**
 190  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 191  *
 192  *      This is called after we wake back up (or if entering the sleep state
 193  *      failed).
 194  */
 195 static void acpi_pm_finish(void)
 196 {
 197         u32 acpi_state = acpi_target_sleep_state;
 198
 199         acpi_ec_unblock_transactions();
 200         suspend_nvs_free();
 201
 202         if (acpi_state == ACPI_STATE_S0)
 203                 return;
 204
 205         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 206                 acpi_state);
 207         acpi_disable_wakeup_devices(acpi_state);
 208         acpi_leave_sleep_state(acpi_state);
 209
 210         /* reset firmware waking vector */
 211         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 212
 213         acpi_target_sleep_state = ACPI_STATE_S0;
 214 }
 215
 216 /**
 217  *      acpi_pm_end - Finish up suspend sequence.
 218  */
 219 static void acpi_pm_end(void)
 220 {
 221         /*
 222          * This is necessary in case acpi_pm_finish() is not called during a
 223          * failing transition to a sleep state.
 224          */
 225         acpi_target_sleep_state = ACPI_STATE_S0;
 226         acpi_sleep_tts_switch(acpi_target_sleep_state);
 227 }
 228 #else /* !CONFIG_ACPI_SLEEP */
 229 #define acpi_target_sleep_state ACPI_STATE_S0
 230 #endif /* CONFIG_ACPI_SLEEP */
 231
 232 #ifdef CONFIG_SUSPEND
 233 static u32 acpi_suspend_states[] = {
 234         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 235         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 236         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 237         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 238 };
 239
 240 /**
 241  *      acpi_suspend_begin - Set the target system sleep state to the state
 242  *              associated with given @pm_state, if supported.
 243  */
 244 static int acpi_suspend_begin(suspend_state_t pm_state)
 245 {
 246         u32 acpi_state = acpi_suspend_states[pm_state];
 247         int error = 0;
 248
 249         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 250         if (error)
 251                 return error;
 252
 253         if (sleep_states[acpi_state]) {
 254                 acpi_target_sleep_state = acpi_state;
 255                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 256         } else {
 257                 printk(KERN_ERR "ACPI does not support this state: %d\n",
 258                         pm_state);
 259                 error = -ENOSYS;
 260         }
 261         return error;
 262 }
 263
 264 /**
 265  *      acpi_suspend_enter - Actually enter a sleep state.
 266  *      @pm_state: ignored
 267  *
 268  *      Flush caches and go to sleep. For STR we have to call arch-specific
 269  *      assembly, which in turn call acpi_enter_sleep_state().
 270  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 271  */
 272 static int acpi_suspend_enter(suspend_state_t pm_state)
 273 {
 274         acpi_status status = AE_OK;
 275         u32 acpi_state = acpi_target_sleep_state;
 276         int error;
 277
 278         ACPI_FLUSH_CPU_CACHE();
 279
 280         switch (acpi_state) {
 281         case ACPI_STATE_S1:
 282                 barrier();
 283                 status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags);
 284                 break;
 285
 286         case ACPI_STATE_S3:
 287                 error = acpi_suspend_lowlevel();
 288                 if (error)
 289                         return error;
 290                 pr_info(PREFIX "Low-level resume complete\n");
 291                 break;
 292         }
 293
 294         /* This violates the spec but is required for bug compatibility. */
 295         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 296
 297         /* Reprogram control registers and execute _BFS */
 298         acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags);
 299
 300         /* ACPI 3.0 specs (P62) says that it's the responsibility
 301          * of the OSPM to clear the status bit [ implying that the
 302          * POWER_BUTTON event should not reach userspace ]
 303          */
 304         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
 305                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 306
 307         /*
 308          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 309          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 310          * acpi_leave_sleep_state will reenable specific GPEs later
 311          */
 312         acpi_disable_all_gpes();
 313         /* Allow EC transactions to happen. */
 314         acpi_ec_unblock_transactions_early();
 315
 316         suspend_nvs_restore();
 317
 318         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 319 }
 320
 321 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 322 {
 323         u32 acpi_state;
 324
 325         switch (pm_state) {
 326         case PM_SUSPEND_ON:
 327         case PM_SUSPEND_STANDBY:
 328         case PM_SUSPEND_MEM:
 329                 acpi_state = acpi_suspend_states[pm_state];
 330
 331                 return sleep_states[acpi_state];
 332         default:
 333                 return 0;
 334         }
 335 }
 336
 337 static const struct platform_suspend_ops acpi_suspend_ops = {
 338         .valid = acpi_suspend_state_valid,
 339         .begin = acpi_suspend_begin,
 340         .prepare_late = acpi_pm_prepare,
 341         .enter = acpi_suspend_enter,
 342         .wake = acpi_pm_finish,
 343         .end = acpi_pm_end,
 344 };
 345
 346 /**
 347  *      acpi_suspend_begin_old - Set the target system sleep state to the
 348  *              state associated with given @pm_state, if supported, and
 349  *              execute the _PTS control method.  This function is used if the
 350  *              pre-ACPI 2.0 suspend ordering has been requested.
 351  */
 352 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 353 {
 354         int error = acpi_suspend_begin(pm_state);
 355         if (!error)
 356                 error = __acpi_pm_prepare();
 357
 358         return error;
 359 }
 360
 361 /*
 362  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 363  * been requested.
 364  */
 365 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 366         .valid = acpi_suspend_state_valid,
 367         .begin = acpi_suspend_begin_old,
 368         .prepare_late = acpi_pm_pre_suspend,
 369         .enter = acpi_suspend_enter,
 370         .wake = acpi_pm_finish,
 371         .end = acpi_pm_end,
 372         .recover = acpi_pm_finish,
 373 };
 374
 375 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 376 {
 377         old_suspend_ordering = true;
 378         return 0;
 379 }
 380
 381 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 382 {
 383         acpi_nvs_nosave();
 384         return 0;
 385 }
 386
 387 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 388         {
 389         .callback = init_old_suspend_ordering,
 390         .ident = "Abit KN9 (nForce4 variant)",
 391         .matches = {
 392                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 393                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 394                 },
 395         },
 396         {
 397         .callback = init_old_suspend_ordering,
 398         .ident = "HP xw4600 Workstation",
 399         .matches = {
 400                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 401                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 402                 },
 403         },
 404         {
 405         .callback = init_old_suspend_ordering,
 406         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 407         .matches = {
 408                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 409                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 410                 },
 411         },
 412         {
 413         .callback = init_old_suspend_ordering,
 414         .ident = "Panasonic CF51-2L",
 415         .matches = {
 416                 DMI_MATCH(DMI_BOARD_VENDOR,
 417                                 "Matsushita Electric Industrial Co.,Ltd."),
 418                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 419                 },
 420         },
 421         {
 422         .callback = init_nvs_nosave,
 423         .ident = "Sony Vaio VGN-FW21E",
 424         .matches = {
 425                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 426                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 427                 },
 428         },
 429         {
 430         .callback = init_nvs_nosave,
 431         .ident = "Sony Vaio VPCEB17FX",
 432         .matches = {
 433                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 434                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 435                 },
 436         },
 437         {
 438         .callback = init_nvs_nosave,
 439         .ident = "Sony Vaio VGN-SR11M",
 440         .matches = {
 441                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 442                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 443                 },
 444         },
 445         {
 446         .callback = init_nvs_nosave,
 447         .ident = "Everex StepNote Series",
 448         .matches = {
 449                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 450                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 451                 },
 452         },
 453         {
 454         .callback = init_nvs_nosave,
 455         .ident = "Sony Vaio VPCEB1Z1E",
 456         .matches = {
 457                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 458                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 459                 },
 460         },
 461         {
 462         .callback = init_nvs_nosave,
 463         .ident = "Sony Vaio VGN-NW130D",
 464         .matches = {
 465                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 466                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 467                 },
 468         },
 469         {
 470         .callback = init_nvs_nosave,
 471         .ident = "Sony Vaio VPCCW29FX",
 472         .matches = {
 473                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 474                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 475                 },
 476         },
 477         {
 478         .callback = init_nvs_nosave,
 479         .ident = "Averatec AV1020-ED2",
 480         .matches = {
 481                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 482                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 483                 },
 484         },
 485         {
 486         .callback = init_old_suspend_ordering,
 487         .ident = "Asus A8N-SLI DELUXE",
 488         .matches = {
 489                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 490                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 491                 },
 492         },
 493         {
 494         .callback = init_old_suspend_ordering,
 495         .ident = "Asus A8N-SLI Premium",
 496         .matches = {
 497                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 498                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 499                 },
 500         },
 501         {
 502         .callback = init_nvs_nosave,
 503         .ident = "Sony Vaio VGN-SR26GN_P",
 504         .matches = {
 505                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 506                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 507                 },
 508         },
 509         {
 510         .callback = init_nvs_nosave,
 511         .ident = "Sony Vaio VGN-FW520F",
 512         .matches = {
 513                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 514                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 515                 },
 516         },
 517         {
 518         .callback = init_nvs_nosave,
 519         .ident = "Asus K54C",
 520         .matches = {
 521                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 522                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 523                 },
 524         },
 525         {
 526         .callback = init_nvs_nosave,
 527         .ident = "Asus K54HR",
 528         .matches = {
 529                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 530                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 531                 },
 532         },
 533         {},
 534 };
 535 #endif /* CONFIG_SUSPEND */
 536
 537 #ifdef CONFIG_HIBERNATION
 538 static unsigned long s4_hardware_signature;
 539 static struct acpi_table_facs *facs;
 540 static bool nosigcheck;
 541
 542 void __init acpi_no_s4_hw_signature(void)
 543 {
 544         nosigcheck = true;
 545 }
 546
 547 static int acpi_hibernation_begin(void)
 548 {
 549         int error;
 550
 551         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 552         if (!error) {
 553                 acpi_target_sleep_state = ACPI_STATE_S4;
 554                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 555         }
 556
 557         return error;
 558 }
 559
 560 static int acpi_hibernation_enter(void)
 561 {
 562         acpi_status status = AE_OK;
 563
 564         ACPI_FLUSH_CPU_CACHE();
 565
 566         /* This shouldn't return.  If it returns, we have a problem */
 567         status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags);
 568         /* Reprogram control registers and execute _BFS */
 569         acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 570
 571         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 572 }
 573
 574 static void acpi_hibernation_leave(void)
 575 {
 576         /*
 577          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 578          * enable it here.
 579          */
 580         acpi_enable();
 581         /* Reprogram control registers and execute _BFS */
 582         acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags);
 583         /* Check the hardware signature */
 584         if (facs && s4_hardware_signature != facs->hardware_signature) {
 585                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
 586                         "cannot resume!\n");
 587                 panic("ACPI S4 hardware signature mismatch");
 588         }
 589         /* Restore the NVS memory area */
 590         suspend_nvs_restore();
 591         /* Allow EC transactions to happen. */
 592         acpi_ec_unblock_transactions_early();
 593 }
 594
 595 static void acpi_pm_thaw(void)
 596 {
 597         acpi_ec_unblock_transactions();
 598         acpi_enable_all_runtime_gpes();
 599 }
 600
 601 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 602         .begin = acpi_hibernation_begin,
 603         .end = acpi_pm_end,
 604         .pre_snapshot = acpi_pm_prepare,
 605         .finish = acpi_pm_finish,
 606         .prepare = acpi_pm_prepare,
 607         .enter = acpi_hibernation_enter,
 608         .leave = acpi_hibernation_leave,
 609         .pre_restore = acpi_pm_freeze,
 610         .restore_cleanup = acpi_pm_thaw,
 611 };
 612
 613 /**
 614  *      acpi_hibernation_begin_old - Set the target system sleep state to
 615  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 616  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 617  *              requested.
 618  */
 619 static int acpi_hibernation_begin_old(void)
 620 {
 621         int error;
 622         /*
 623          * The _TTS object should always be evaluated before the _PTS object.
 624          * When the old_suspended_ordering is true, the _PTS object is
 625          * evaluated in the acpi_sleep_prepare.
 626          */
 627         acpi_sleep_tts_switch(ACPI_STATE_S4);
 628
 629         error = acpi_sleep_prepare(ACPI_STATE_S4);
 630
 631         if (!error) {
 632                 if (!nvs_nosave)
 633                         error = suspend_nvs_alloc();
 634                 if (!error)
 635                         acpi_target_sleep_state = ACPI_STATE_S4;
 636         }
 637         return error;
 638 }
 639
 640 /*
 641  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 642  * been requested.
 643  */
 644 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 645         .begin = acpi_hibernation_begin_old,
 646         .end = acpi_pm_end,
 647         .pre_snapshot = acpi_pm_pre_suspend,
 648         .prepare = acpi_pm_freeze,
 649         .finish = acpi_pm_finish,
 650         .enter = acpi_hibernation_enter,
 651         .leave = acpi_hibernation_leave,
 652         .pre_restore = acpi_pm_freeze,
 653         .restore_cleanup = acpi_pm_thaw,
 654         .recover = acpi_pm_finish,
 655 };
 656 #endif /* CONFIG_HIBERNATION */
 657
 658 int acpi_suspend(u32 acpi_state)
 659 {
 660         suspend_state_t states[] = {
 661                 [1] = PM_SUSPEND_STANDBY,
 662                 [3] = PM_SUSPEND_MEM,
 663                 [5] = PM_SUSPEND_MAX
 664         };
 665
 666         if (acpi_state < 6 && states[acpi_state])
 667                 return pm_suspend(states[acpi_state]);
 668         if (acpi_state == 4)
 669                 return hibernate();
 670         return -EINVAL;
 671 }
 672
 673 #ifdef CONFIG_PM
 674 /**
 675  *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
 676  *              in the system sleep state given by %acpi_target_sleep_state
 677  *      @dev: device to examine; its driver model wakeup flags control
 678  *              whether it should be able to wake up the system
 679  *      @d_min_p: used to store the upper limit of allowed states range
 680  *      Return value: preferred power state of the device on success, -ENODEV on
 681  *              failure (ie. if there's no 'struct acpi_device' for @dev)
 682  *
 683  *      Find the lowest power (highest number) ACPI device power state that
 684  *      device @dev can be in while the system is in the sleep state represented
 685  *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
 686  *      able to wake up the system from this sleep state.  If @d_min_p is set,
 687  *      the highest power (lowest number) device power state of @dev allowed
 688  *      in this system sleep state is stored at the location pointed to by it.
 689  *
 690  *      The caller must ensure that @dev is valid before using this function.
 691  *      The caller is also responsible for figuring out if the device is
 692  *      supposed to be able to wake up the system and passing this information
 693  *      via @wake.
 694  */
 695
 696 int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
 697 {
 698         acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 699         struct acpi_device *adev;
 700         char acpi_method[] = "_SxD";
 701         unsigned long long d_min, d_max;
 702
 703         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 704                 printk(KERN_DEBUG "ACPI handle has no context!\n");
 705                 return -ENODEV;
 706         }
 707
 708         acpi_method[2] = '0' + acpi_target_sleep_state;
 709         /*
 710          * If the sleep state is S0, we will return D3, but if the device has
 711          * _S0W, we will use the value from _S0W
 712          */
 713         d_min = ACPI_STATE_D0;
 714         d_max = ACPI_STATE_D3;
 715
 716         /*
 717          * If present, _SxD methods return the minimum D-state (highest power
 718          * state) we can use for the corresponding S-states.  Otherwise, the
 719          * minimum D-state is D0 (ACPI 3.x).
 720          *
 721          * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
 722          * provided -- that's our fault recovery, we ignore retval.
 723          */
 724         if (acpi_target_sleep_state > ACPI_STATE_S0)
 725                 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
 726
 727         /*
 728          * If _PRW says we can wake up the system from the target sleep state,
 729          * the D-state returned by _SxD is sufficient for that (we assume a
 730          * wakeup-aware driver if wake is set).  Still, if _SxW exists
 731          * (ACPI 3.x), it should return the maximum (lowest power) D-state that
 732          * can wake the system.  _S0W may be valid, too.
 733          */
 734         if (acpi_target_sleep_state == ACPI_STATE_S0 ||
 735             (device_may_wakeup(dev) &&
 736              adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
 737                 acpi_status status;
 738
 739                 acpi_method[3] = 'W';
 740                 status = acpi_evaluate_integer(handle, acpi_method, NULL,
 741                                                 &d_max);
 742                 if (ACPI_FAILURE(status)) {
 743                         if (acpi_target_sleep_state != ACPI_STATE_S0 ||
 744                             status != AE_NOT_FOUND)
 745                                 d_max = d_min;
 746                 } else if (d_max < d_min) {
 747                         /* Warn the user of the broken DSDT */
 748                         printk(KERN_WARNING "ACPI: Wrong value from %s\n",
 749                                 acpi_method);
 750                         /* Sanitize it */
 751                         d_min = d_max;
 752                 }
 753         }
 754
 755         if (d_min_p)
 756                 *d_min_p = d_min;
 757         return d_max;
 758 }
 759 #endif /* CONFIG_PM */
 760
 761 #ifdef CONFIG_PM_SLEEP
 762 /**
 763  * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
 764  * @phys_dev: Device to enable/disable the platform to wake-up the system for.
 765  * @enable: Whether enable or disable the wake-up functionality.
 766  *
 767  * Find the ACPI device object corresponding to @pci_dev and try to
 768  * enable/disable the GPE associated with it.
 769  */
 770 int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
 771 {
 772         struct acpi_device *dev;
 773         acpi_handle handle;
 774
 775         if (!device_run_wake(phys_dev))
 776                 return -EINVAL;
 777
 778         handle = DEVICE_ACPI_HANDLE(phys_dev);
 779         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
 780                 dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
 781                         __func__);
 782                 return -ENODEV;
 783         }
 784
 785         if (enable) {
 786                 acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
 787                 acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
 788         } else {
 789                 acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
 790                 acpi_disable_wakeup_device_power(dev);
 791         }
 792
 793         return 0;
 794 }
 795
 796 /**
 797  *      acpi_pm_device_sleep_wake - enable or disable the system wake-up
 798  *                                  capability of given device
 799  *      @dev: device to handle
 800  *      @enable: 'true' - enable, 'false' - disable the wake-up capability
 801  */
 802 int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 803 {
 804         acpi_handle handle;
 805         struct acpi_device *adev;
 806         int error;
 807
 808         if (!device_can_wakeup(dev))
 809                 return -EINVAL;
 810
 811         handle = DEVICE_ACPI_HANDLE(dev);
 812         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 813                 dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
 814                 return -ENODEV;
 815         }
 816
 817         error = enable ?
 818                 acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
 819                 acpi_disable_wakeup_device_power(adev);
 820         if (!error)
 821                 dev_info(dev, "wake-up capability %s by ACPI\n",
 822                                 enable ? "enabled" : "disabled");
 823
 824         return error;
 825 }
 826 #endif  /* CONFIG_PM_SLEEP */
 827
 828 static void acpi_power_off_prepare(void)
 829 {
 830         /* Prepare to power off the system */
 831         acpi_sleep_prepare(ACPI_STATE_S5);
 832         acpi_disable_all_gpes();
 833 }
 834
 835 static void acpi_power_off(void)
 836 {
 837         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 838         printk(KERN_DEBUG "%s called\n", __func__);
 839         local_irq_disable();
 840         acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags);
 841 }
 842
 843 /*
 844  * ACPI 2.0 created the optional _GTS and _BFS,
 845  * but industry adoption has been neither rapid nor broad.
 846  *
 847  * Linux gets into trouble when it executes poorly validated
 848  * paths through the BIOS, so disable _GTS and _BFS by default,
 849  * but do speak up and offer the option to enable them.
 850  */
 851 static void __init acpi_gts_bfs_check(void)
 852 {
 853         acpi_handle dummy;
 854
 855         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__GTS, &dummy)))
 856         {
 857                 printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
 858                 printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
 859                         "please notify linux-acpi@vger.kernel.org\n");
 860         }
 861         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_PATHNAME__BFS, &dummy)))
 862         {
 863                 printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
 864                 printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
 865                         "please notify linux-acpi@vger.kernel.org\n");
 866         }
 867 }
 868
 869 int __init acpi_sleep_init(void)
 870 {
 871         acpi_status status;
 872         u8 type_a, type_b;
 873 #ifdef CONFIG_SUSPEND
 874         int i = 0;
 875
 876         dmi_check_system(acpisleep_dmi_table);
 877 #endif
 878
 879         if (acpi_disabled)
 880                 return 0;
 881
 882         sleep_states[ACPI_STATE_S0] = 1;
 883         printk(KERN_INFO PREFIX "(supports S0");
 884
 885 #ifdef CONFIG_SUSPEND
 886         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 887                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 888                 if (ACPI_SUCCESS(status)) {
 889                         sleep_states[i] = 1;
 890                         printk(KERN_CONT " S%d", i);
 891                 }
 892         }
 893
 894         suspend_set_ops(old_suspend_ordering ?
 895                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 896 #endif
 897
 898 #ifdef CONFIG_HIBERNATION
 899         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 900         if (ACPI_SUCCESS(status)) {
 901                 hibernation_set_ops(old_suspend_ordering ?
 902                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 903                 sleep_states[ACPI_STATE_S4] = 1;
 904                 printk(KERN_CONT " S4");
 905                 if (!nosigcheck) {
 906                         acpi_get_table(ACPI_SIG_FACS, 1,
 907                                 (struct acpi_table_header **)&facs);
 908                         if (facs)
 909                                 s4_hardware_signature =
 910                                         facs->hardware_signature;
 911                 }
 912         }
 913 #endif
 914         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 915         if (ACPI_SUCCESS(status)) {
 916                 sleep_states[ACPI_STATE_S5] = 1;
 917                 printk(KERN_CONT " S5");
 918                 pm_power_off_prepare = acpi_power_off_prepare;
 919                 pm_power_off = acpi_power_off;
 920         }
 921         printk(KERN_CONT ")\n");
 922         /*
 923          * Register the tts_notifier to reboot notifier list so that the _TTS
 924          * object can also be evaluated when the system enters S5.
 925          */
 926         register_reboot_notifier(&tts_notifier);
 927         acpi_gts_bfs_check();
 928         return 0;
 929 }