drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         depends on !SUN4 || BROKEN
  11         select SCSI
  12         ---help---
  13           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  14           any other ATA device under Linux, say Y and make sure that you know
  15           the name of your ATA host adapter (the card inside your computer
  16           that "speaks" the ATA protocol, also called ATA controller),
  17           because you will be asked for it.
  18
  19           NOTE: ATA enables basic SCSI support; *however*,
  20           'SCSI disk support', 'SCSI tape support', or
  21           'SCSI CDROM support' may also be needed,
  22           depending on your hardware configuration.
  23
  24 if ATA
  25
  26 config ATA_NONSTANDARD
  27        bool
  28        default n
  29
  30 config ATA_ACPI
  31         bool
  32         depends on ACPI && PCI
  33         select ACPI_DOCK
  34         default y
  35         help
  36           This option adds support for ATA-related ACPI objects.
  37           These ACPI objects add the ability to retrieve taskfiles
  38           from the ACPI BIOS and write them to the disk controller.
  39           These objects may be related to performance, security,
  40           power management, or other areas.
  41           You can disable this at kernel boot time by using the
  42           option libata.noacpi=1
  43
  44 config SATA_AHCI
  45         tristate "AHCI SATA support"
  46         depends on PCI
  47         help
  48           This option enables support for AHCI Serial ATA.
  49
  50           If unsure, say N.
  51
  52 config SATA_SVW
  53         tristate "ServerWorks Frodo / Apple K2 SATA support"
  54         depends on PCI
  55         help
  56           This option enables support for Broadcom/Serverworks/Apple K2
  57           SATA support.
  58
  59           If unsure, say N.
  60
  61 config ATA_PIIX
  62         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
  63         depends on PCI
  64         help
  65           This option enables support for ICH5/6/7/8 Serial ATA
  66           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  67           host controllers.
  68
  69           If unsure, say N.
  70
  71 config SATA_MV
  72         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
  73         depends on EXPERIMENTAL
  74         help
  75           This option enables support for the Marvell Serial ATA family.
  76           Currently supports 88SX[56]0[48][01] chips.
  77
  78           If unsure, say N.
  79
  80 config SATA_NV
  81         tristate "NVIDIA SATA support"
  82         depends on PCI
  83         help
  84           This option enables support for NVIDIA Serial ATA.
  85
  86           If unsure, say N.
  87
  88 config PDC_ADMA
  89         tristate "Pacific Digital ADMA support"
  90         depends on PCI
  91         help
  92           This option enables support for Pacific Digital ADMA controllers
  93
  94           If unsure, say N.
  95
  96 config SATA_QSTOR
  97         tristate "Pacific Digital SATA QStor support"
  98         depends on PCI
  99         help
 100           This option enables support for Pacific Digital Serial ATA QStor.
 101
 102           If unsure, say N.
 103
 104 config SATA_PROMISE
 105         tristate "Promise SATA TX2/TX4 support"
 106         depends on PCI
 107         help
 108           This option enables support for Promise Serial ATA TX2/TX4.
 109
 110           If unsure, say N.
 111
 112 config SATA_SX4
 113         tristate "Promise SATA SX4 support"
 114         depends on PCI && EXPERIMENTAL
 115         help
 116           This option enables support for Promise Serial ATA SX4.
 117
 118           If unsure, say N.
 119
 120 config SATA_SIL
 121         tristate "Silicon Image SATA support"
 122         depends on PCI
 123         help
 124           This option enables support for Silicon Image Serial ATA.
 125
 126           If unsure, say N.
 127
 128 config SATA_SIL24
 129         tristate "Silicon Image 3124/3132 SATA support"
 130         depends on PCI
 131         help
 132           This option enables support for Silicon Image 3124/3132 Serial ATA.
 133
 134           If unsure, say N.
 135
 136 config SATA_SIS
 137         tristate "SiS 964/965/966/180 SATA support"
 138         depends on PCI
 139         select PATA_SIS
 140         help
 141           This option enables support for SiS Serial ATA on
 142           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 143           The PATA support for SiS 180 requires additionally to
 144           enable the PATA_SIS driver in the config.
 145           If unsure, say N.
 146
 147 config SATA_ULI
 148         tristate "ULi Electronics SATA support"
 149         depends on PCI
 150         help
 151           This option enables support for ULi Electronics SATA.
 152
 153           If unsure, say N.
 154
 155 config SATA_VIA
 156         tristate "VIA SATA support"
 157         depends on PCI
 158         help
 159           This option enables support for VIA Serial ATA.
 160
 161           If unsure, say N.
 162
 163 config SATA_VITESSE
 164         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 165         depends on PCI
 166         help
 167           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 168
 169           If unsure, say N.
 170
 171 config SATA_INIC162X
 172         tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
 173         depends on PCI && EXPERIMENTAL
 174         help
 175           This option enables support for Initio 162x Serial ATA.
 176
 177 config PATA_ACPI
 178         tristate "ACPI firmware driver for PATA"
 179         depends on ATA_ACPI
 180         help
 181           This option enables an ACPI method driver which drives
 182           motherboard PATA controller interfaces through the ACPI
 183           firmware in the BIOS. This driver can sometimes handle
 184           otherwise unsupported hardware.
 185
 186 config SATA_FSL
 187         tristate "Freescale 3.0Gbps SATA support"
 188         depends on FSL_SOC
 189         help
 190           This option enables support for Freescale 3.0Gbps SATA controller.
 191           It can be found on MPC837x and MPC8315.
 192
 193           If unsure, say N.
 194
 195 config PATA_ALI
 196         tristate "ALi PATA support (Experimental)"
 197         depends on PCI && EXPERIMENTAL
 198         help
 199           This option enables support for the ALi ATA interfaces
 200           found on the many ALi chipsets.
 201
 202           If unsure, say N.
 203
 204 config PATA_AMD
 205         tristate "AMD/NVidia PATA support"
 206         depends on PCI
 207         help
 208           This option enables support for the AMD and NVidia PATA
 209           interfaces found on the chipsets for Athlon/Athlon64.
 210
 211           If unsure, say N.
 212
 213 config PATA_ARTOP
 214         tristate "ARTOP 6210/6260 PATA support"
 215         depends on PCI
 216         help
 217           This option enables support for ARTOP PATA controllers.
 218
 219           If unsure, say N.
 220
 221 config PATA_AT32
 222         tristate "Atmel AVR32 PATA support (Experimental)"
 223         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 224         help
 225           This option enables support for the IDE devices on the
 226           Atmel AT32AP platform.
 227
 228           If unsure, say N.
 229
 230 config PATA_ATIIXP
 231         tristate "ATI PATA support"
 232         depends on PCI
 233         help
 234           This option enables support for the ATI ATA interfaces
 235           found on the many ATI chipsets.
 236
 237           If unsure, say N.
 238
 239 config PATA_CMD640_PCI
 240         tristate "CMD640 PCI PATA support (Very Experimental)"
 241         depends on PCI && EXPERIMENTAL
 242         help
 243           This option enables support for the CMD640 PCI IDE
 244           interface chip. Only the primary channel is currently
 245           supported.
 246
 247           If unsure, say N.
 248
 249 config PATA_CMD64X
 250         tristate "CMD64x PATA support"
 251         depends on PCI
 252         help
 253           This option enables support for the CMD64x series chips
 254           except for the CMD640.
 255
 256           If unsure, say N.
 257
 258 config PATA_CS5520
 259         tristate "CS5510/5520 PATA support"
 260         depends on PCI
 261         help
 262           This option enables support for the Cyrix 5510/5520
 263           companion chip used with the MediaGX/Geode processor family.
 264
 265           If unsure, say N.
 266
 267 config PATA_CS5530
 268         tristate "CS5530 PATA support (Experimental)"
 269         depends on PCI && EXPERIMENTAL
 270         help
 271           This option enables support for the Cyrix/NatSemi/AMD CS5530
 272           companion chip used with the MediaGX/Geode processor family.
 273
 274           If unsure, say N.
 275
 276 config PATA_CS5535
 277         tristate "CS5535 PATA support (Experimental)"
 278         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 279         help
 280           This option enables support for the NatSemi/AMD CS5535
 281           companion chip used with the Geode processor family.
 282
 283           If unsure, say N.
 284
 285 config PATA_CS5536
 286         tristate "CS5536 PATA support (Experimental)"
 287         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 288         help
 289           This option enables support for the AMD CS5536
 290           companion chip used with the Geode LX processor family.
 291
 292           If unsure, say N.
 293
 294 config PATA_CYPRESS
 295         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 296         depends on PCI && EXPERIMENTAL
 297         help
 298           This option enables support for the Cypress/Contaq CY82C693
 299           chipset found in some Alpha systems
 300
 301           If unsure, say N.
 302
 303 config PATA_EFAR
 304         tristate "EFAR SLC90E66 support"
 305         depends on PCI
 306         help
 307           This option enables support for the EFAR SLC90E66
 308           IDE controller found on some older machines.
 309
 310           If unsure, say N.
 311
 312 config ATA_GENERIC
 313         tristate "Generic ATA support"
 314         depends on PCI
 315         help
 316           This option enables support for generic BIOS configured
 317           ATA controllers via the new ATA layer
 318
 319           If unsure, say N.
 320
 321 config PATA_HPT366
 322         tristate "HPT 366/368 PATA support"
 323         depends on PCI
 324         help
 325           This option enables support for the HPT 366 and 368
 326           PATA controllers via the new ATA layer.
 327
 328           If unsure, say N.
 329
 330 config PATA_HPT37X
 331         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 332         depends on PCI && EXPERIMENTAL
 333         help
 334           This option enables support for the majority of the later HPT
 335           PATA controllers via the new ATA layer.
 336
 337           If unsure, say N.
 338
 339 config PATA_HPT3X2N
 340         tristate "HPT 372N/302N PATA support (Very Experimental)"
 341         depends on PCI && EXPERIMENTAL
 342         help
 343           This option enables support for the N variant HPT PATA
 344           controllers via the new ATA layer
 345
 346           If unsure, say N.
 347
 348 config PATA_HPT3X3
 349         tristate "HPT 343/363 PATA support"
 350         depends on PCI
 351         help
 352           This option enables support for the HPT 343/363
 353           PATA controllers via the new ATA layer
 354
 355           If unsure, say N.
 356
 357 config PATA_HPT3X3_DMA
 358         bool "HPT 343/363 DMA support (Experimental)"
 359         depends on PATA_HPT3X3
 360         help
 361           This option enables DMA support for the HPT343/363
 362           controllers. Enable with care as there are still some
 363           problems with DMA on this chipset.
 364
 365 config PATA_ISAPNP
 366         tristate "ISA Plug and Play PATA support (Experimental)"
 367         depends on EXPERIMENTAL && ISAPNP
 368         help
 369           This option enables support for ISA plug & play ATA
 370           controllers such as those found on old soundcards.
 371
 372           If unsure, say N.
 373
 374 config PATA_IT821X
 375         tristate "IT8211/2 PATA support"
 376         depends on PCI
 377         help
 378           This option enables support for the ITE 8211 and 8212
 379           PATA controllers via the new ATA layer, including RAID
 380           mode.
 381
 382           If unsure, say N.
 383
 384 config PATA_IT8213
 385         tristate "IT8213 PATA support (Experimental)"
 386         depends on PCI && EXPERIMENTAL
 387         help
 388           This option enables support for the ITE 821 PATA
 389           controllers via the new ATA layer.
 390
 391           If unsure, say N.
 392
 393 config PATA_JMICRON
 394         tristate "JMicron PATA support"
 395         depends on PCI
 396         help
 397           Enable support for the JMicron IDE controller, via the new
 398           ATA layer.
 399
 400           If unsure, say N.
 401
 402 config PATA_LEGACY
 403         tristate "Legacy ISA PATA support (Experimental)"
 404         depends on ISA && EXPERIMENTAL
 405         help
 406           This option enables support for ISA/VLB bus legacy PATA
 407           ports and allows them to be accessed via the new ATA layer.
 408
 409           If unsure, say N.
 410
 411 config PATA_TRIFLEX
 412         tristate "Compaq Triflex PATA support"
 413         depends on PCI
 414         help
 415           Enable support for the Compaq 'Triflex' IDE controller as found
 416           on many Compaq Pentium-Pro systems, via the new ATA layer.
 417
 418           If unsure, say N.
 419
 420 config PATA_MARVELL
 421         tristate "Marvell PATA support via legacy mode"
 422         depends on PCI
 423         help
 424           This option enables limited support for the Marvell 88SE6145 ATA
 425           controller.
 426
 427           If unsure, say N.
 428
 429 config PATA_MPC52xx
 430         tristate "Freescale MPC52xx SoC internal IDE"
 431         depends on PPC_MPC52xx
 432         help
 433           This option enables support for integrated IDE controller
 434           of the Freescale MPC52xx SoC.
 435
 436           If unsure, say N.
 437
 438 config PATA_MPIIX
 439         tristate "Intel PATA MPIIX support"
 440         depends on PCI
 441         help
 442           This option enables support for MPIIX PATA support.
 443
 444           If unsure, say N.
 445
 446 config PATA_OLDPIIX
 447         tristate "Intel PATA old PIIX support"
 448         depends on PCI
 449         help
 450           This option enables support for early PIIX PATA support.
 451
 452           If unsure, say N.
 453
 454 config PATA_NETCELL
 455         tristate "NETCELL Revolution RAID support"
 456         depends on PCI
 457         help
 458           This option enables support for the Netcell Revolution RAID
 459           PATA controller.
 460
 461           If unsure, say N.
 462
 463 config PATA_NINJA32
 464         tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
 465         depends on PCI && EXPERIMENTAL
 466         help
 467           This option enables support for the Ninja32, Delkin and
 468           possibly other brands of Cardbus ATA adapter
 469
 470           If unsure, say N.
 471
 472 config PATA_NS87410
 473         tristate "Nat Semi NS87410 PATA support (Experimental)"
 474         depends on PCI && EXPERIMENTAL
 475         help
 476           This option enables support for the National Semiconductor
 477           NS87410 PCI-IDE controller.
 478
 479           If unsure, say N.
 480
 481 config PATA_NS87415
 482         tristate "Nat Semi NS87415 PATA support (Experimental)"
 483         depends on PCI && EXPERIMENTAL
 484         help
 485           This option enables support for the National Semiconductor
 486           NS87415 PCI-IDE controller.
 487
 488           If unsure, say N.
 489
 490 config PATA_OPTI
 491         tristate "OPTI621/6215 PATA support (Very Experimental)"
 492         depends on PCI && EXPERIMENTAL
 493         help
 494           This option enables full PIO support for the early Opti ATA
 495           controllers found on some old motherboards.
 496
 497           If unsure, say N.
 498
 499 config PATA_OPTIDMA
 500         tristate "OPTI FireStar PATA support (Very Experimental)"
 501         depends on PCI && EXPERIMENTAL
 502         help
 503           This option enables DMA/PIO support for the later OPTi
 504           controllers found on some old motherboards and in some
 505           laptops.
 506
 507           If unsure, say N.
 508
 509 config PATA_PCMCIA
 510         tristate "PCMCIA PATA support"
 511         depends on PCMCIA
 512         help
 513           This option enables support for PCMCIA ATA interfaces, including
 514           compact flash card adapters via the new ATA layer.
 515
 516           If unsure, say N.
 517
 518 config PATA_PDC_OLD
 519         tristate "Older Promise PATA controller support (Experimental)"
 520         depends on PCI && EXPERIMENTAL
 521         help
 522           This option enables support for the Promise 20246, 20262, 20263,
 523           20265 and 20267 adapters.
 524
 525           If unsure, say N.
 526
 527 config PATA_QDI
 528         tristate "QDI VLB PATA support"
 529         depends on ISA
 530         help
 531           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 532
 533 config PATA_RADISYS
 534         tristate "RADISYS 82600 PATA support (Very Experimental)"
 535         depends on PCI && EXPERIMENTAL
 536         help
 537           This option enables support for the RADISYS 82600
 538           PATA controllers via the new ATA layer
 539
 540           If unsure, say N.
 541
 542 config PATA_RB500
 543         tristate "RouterBoard 500 PATA CompactFlash support"
 544         depends on MIKROTIK_RB500
 545         help
 546           This option enables support for the RouterBoard 500
 547           PATA CompactFlash controller.
 548
 549           If unsure, say N.
 550
 551 config PATA_RZ1000
 552         tristate "PC Tech RZ1000 PATA support"
 553         depends on PCI
 554         help
 555           This option enables basic support for the PC Tech RZ1000/1
 556           PATA controllers via the new ATA layer
 557
 558           If unsure, say N.
 559
 560 config PATA_SC1200
 561         tristate "SC1200 PATA support (Very Experimental)"
 562         depends on PCI && EXPERIMENTAL
 563         help
 564           This option enables support for the NatSemi/AMD SC1200 SoC
 565           companion chip used with the Geode processor family.
 566
 567           If unsure, say N.
 568
 569 config PATA_SERVERWORKS
 570         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 571         depends on PCI
 572         help
 573           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 574           HT1000 PATA controllers, via the new ATA layer.
 575
 576           If unsure, say N.
 577
 578 config PATA_PDC2027X
 579         tristate "Promise PATA 2027x support"
 580         depends on PCI
 581         help
 582           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 583
 584           If unsure, say N.
 585
 586 config PATA_SIL680
 587         tristate "CMD / Silicon Image 680 PATA support"
 588         depends on PCI
 589         help
 590           This option enables support for CMD / Silicon Image 680 PATA.
 591
 592           If unsure, say N.
 593
 594 config PATA_SIS
 595         tristate "SiS PATA support (Experimental)"
 596         depends on PCI && EXPERIMENTAL
 597         help
 598           This option enables support for SiS PATA controllers
 599
 600           If unsure, say N.
 601
 602 config PATA_VIA
 603         tristate "VIA PATA support"
 604         depends on PCI
 605         help
 606           This option enables support for the VIA PATA interfaces
 607           found on the many VIA chipsets.
 608
 609           If unsure, say N.
 610
 611 config PATA_WINBOND
 612         tristate "Winbond SL82C105 PATA support"
 613         depends on PCI
 614         help
 615           This option enables support for SL82C105 PATA devices found in the
 616           Netwinder and some other systems
 617
 618           If unsure, say N.
 619
 620 config PATA_WINBOND_VLB
 621         tristate "Winbond W83759A VLB PATA support (Experimental)"
 622         depends on ISA && EXPERIMENTAL
 623         help
 624           Support for the Winbond W83759A controller on Vesa Local Bus
 625           systems.
 626
 627 config PATA_PLATFORM
 628         tristate "Generic platform device PATA support"
 629         depends on EMBEDDED || ARCH_RPC || PPC
 630         help
 631           This option enables support for generic directly connected ATA
 632           devices commonly found on embedded systems.
 633
 634           If unsure, say N.
 635
 636 config PATA_OF_PLATFORM
 637         tristate "OpenFirmware platform device PATA support"
 638         depends on PATA_PLATFORM && PPC_OF
 639         help
 640           This option enables support for generic directly connected ATA
 641           devices commonly found on embedded systems with OpenFirmware
 642           bindings.
 643
 644           If unsure, say N.
 645
 646 config PATA_ICSIDE
 647         tristate "Acorn ICS PATA support"
 648         depends on ARM && ARCH_ACORN
 649         help
 650           On Acorn systems, say Y here if you wish to use the ICS PATA
 651           interface card.  This is not required for ICS partition support.
 652           If you are unsure, say N to this.
 653
 654 config PATA_IXP4XX_CF
 655         tristate "IXP4XX Compact Flash support"
 656         depends on ARCH_IXP4XX
 657         help
 658           This option enables support for a Compact Flash connected on
 659           the ixp4xx expansion bus. This driver had been written for
 660           Loft/Avila boards in mind but can work with others.
 661
 662           If unsure, say N.
 663
 664 config PATA_SCC
 665         tristate "Toshiba's Cell Reference Set IDE support"
 666         depends on PCI && PPC_CELLEB
 667         help
 668           This option enables support for the built-in IDE controller on
 669           Toshiba Cell Reference Board.
 670
 671           If unsure, say N.
 672
 673 config PATA_BF54X
 674         tristate "Blackfin 54x ATAPI support"
 675         depends on BF542 || BF548 || BF549
 676         help
 677           This option enables support for the built-in ATAPI controller on
 678           Blackfin 54x family chips.
 679
 680           If unsure, say N.
 681
 682 endif # ATA