drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   6
   7 config ATA
   8         tristate "ATA device support"
   9         depends on BLOCK
  10         depends on !(M32R || M68K) || BROKEN
  11         depends on !SUN4 || BROKEN
  12         select SCSI
  13         ---help---
  14           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  15           any other ATA device under Linux, say Y and make sure that you know
  16           the name of your ATA host adapter (the card inside your computer
  17           that "speaks" the ATA protocol, also called ATA controller),
  18           because you will be asked for it.
  19
  20 if ATA
  21
  22 config ATA_NONSTANDARD
  23        bool
  24        default n
  25
  26 config SATA_AHCI
  27         tristate "AHCI SATA support"
  28         depends on PCI
  29         help
  30           This option enables support for AHCI Serial ATA.
  31
  32           If unsure, say N.
  33
  34 config SATA_SVW
  35         tristate "ServerWorks Frodo / Apple K2 SATA support"
  36         depends on PCI
  37         help
  38           This option enables support for Broadcom/Serverworks/Apple K2
  39           SATA support.
  40
  41           If unsure, say N.
  42
  43 config ATA_PIIX
  44         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
  45         depends on PCI
  46         help
  47           This option enables support for ICH5/6/7/8 Serial ATA
  48           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  49           host controllers.
  50
  51           If unsure, say N.
  52
  53 config SATA_MV
  54         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
  55         depends on PCI && EXPERIMENTAL
  56         help
  57           This option enables support for the Marvell Serial ATA family.
  58           Currently supports 88SX[56]0[48][01] chips.
  59
  60           If unsure, say N.
  61
  62 config SATA_NV
  63         tristate "NVIDIA SATA support"
  64         depends on PCI
  65         help
  66           This option enables support for NVIDIA Serial ATA.
  67
  68           If unsure, say N.
  69
  70 config PDC_ADMA
  71         tristate "Pacific Digital ADMA support"
  72         depends on PCI
  73         help
  74           This option enables support for Pacific Digital ADMA controllers
  75
  76           If unsure, say N.
  77
  78 config SATA_QSTOR
  79         tristate "Pacific Digital SATA QStor support"
  80         depends on PCI
  81         help
  82           This option enables support for Pacific Digital Serial ATA QStor.
  83
  84           If unsure, say N.
  85
  86 config SATA_PROMISE
  87         tristate "Promise SATA TX2/TX4 support"
  88         depends on PCI
  89         help
  90           This option enables support for Promise Serial ATA TX2/TX4.
  91
  92           If unsure, say N.
  93
  94 config SATA_SX4
  95         tristate "Promise SATA SX4 support"
  96         depends on PCI && EXPERIMENTAL
  97         help
  98           This option enables support for Promise Serial ATA SX4.
  99
 100           If unsure, say N.
 101
 102 config SATA_SIL
 103         tristate "Silicon Image SATA support"
 104         depends on PCI
 105         help
 106           This option enables support for Silicon Image Serial ATA.
 107
 108           If unsure, say N.
 109
 110 config SATA_SIL24
 111         tristate "Silicon Image 3124/3132 SATA support"
 112         depends on PCI
 113         help
 114           This option enables support for Silicon Image 3124/3132 Serial ATA.
 115
 116           If unsure, say N.
 117
 118 config SATA_SIS
 119         tristate "SiS 964/965/966/180 SATA support"
 120         depends on PCI
 121         select PATA_SIS
 122         help
 123           This option enables support for SiS Serial ATA on
 124           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 125           The PATA support for SiS 180 requires additionally to
 126           enable the PATA_SIS driver in the config.
 127           If unsure, say N.
 128
 129 config SATA_ULI
 130         tristate "ULi Electronics SATA support"
 131         depends on PCI
 132         help
 133           This option enables support for ULi Electronics SATA.
 134
 135           If unsure, say N.
 136
 137 config SATA_VIA
 138         tristate "VIA SATA support"
 139         depends on PCI
 140         help
 141           This option enables support for VIA Serial ATA.
 142
 143           If unsure, say N.
 144
 145 config SATA_VITESSE
 146         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 147         depends on PCI
 148         help
 149           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 150
 151           If unsure, say N.
 152
 153 config SATA_INIC162X
 154         tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
 155         depends on PCI && EXPERIMENTAL
 156         help
 157           This option enables support for Initio 162x Serial ATA.
 158
 159 config SATA_INTEL_COMBINED
 160         bool
 161         depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
 162         default y
 163
 164 config SATA_ACPI
 165         bool
 166         depends on ACPI && PCI
 167         default y
 168         help
 169           This option adds support for SATA-related ACPI objects.
 170           These ACPI objects add the ability to retrieve taskfiles
 171           from the ACPI BIOS and write them to the disk controller.
 172           These objects may be related to performance, security,
 173           power management, or other areas.
 174           You can disable this at kernel boot time by using the
 175           option libata.noacpi=1
 176
 177 config PATA_ALI
 178         tristate "ALi PATA support (Experimental)"
 179         depends on PCI && EXPERIMENTAL
 180         help
 181           This option enables support for the ALi ATA interfaces
 182           found on the many ALi chipsets.
 183
 184           If unsure, say N.
 185
 186 config PATA_AMD
 187         tristate "AMD/NVidia PATA support (Experimental)"
 188         depends on PCI
 189         help
 190           This option enables support for the AMD and NVidia PATA
 191           interfaces found on the chipsets for Athlon/Athlon64.
 192
 193           If unsure, say N.
 194
 195 config PATA_ARTOP
 196         tristate "ARTOP 6210/6260 PATA support (Experimental)"
 197         depends on PCI && EXPERIMENTAL
 198         help
 199           This option enables support for ARTOP PATA controllers.
 200
 201           If unsure, say N.
 202
 203 config PATA_ATIIXP
 204         tristate "ATI PATA support (Experimental)"
 205         depends on PCI && EXPERIMENTAL
 206         help
 207           This option enables support for the ATI ATA interfaces
 208           found on the many ATI chipsets.
 209
 210           If unsure, say N.
 211
 212 config PATA_CMD64X
 213         tristate "CMD64x PATA support (Very Experimental)"
 214         depends on PCI&& EXPERIMENTAL
 215         help
 216           This option enables support for the CMD64x series chips
 217           except for the CMD640.
 218
 219           If unsure, say N.
 220
 221 config PATA_CS5520
 222         tristate "CS5510/5520 PATA support"
 223         depends on PCI
 224         help
 225           This option enables support for the Cyrix 5510/5520
 226           companion chip used with the MediaGX/Geode processor family.
 227
 228           If unsure, say N.
 229
 230 config PATA_CS5530
 231         tristate "CS5530 PATA support (Experimental)"
 232         depends on PCI && EXPERIMENTAL
 233         help
 234           This option enables support for the Cyrix/NatSemi/AMD CS5530
 235           companion chip used with the MediaGX/Geode processor family.
 236
 237           If unsure, say N.
 238
 239 config PATA_CS5535
 240         tristate "CS5535 PATA support (Experimental)"
 241         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 242         help
 243           This option enables support for the NatSemi/AMD CS5535
 244           companion chip used with the Geode processor family.
 245
 246           If unsure, say N.
 247
 248 config PATA_CYPRESS
 249         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 250         depends on PCI && EXPERIMENTAL
 251         help
 252           This option enables support for the Cypress/Contaq CY82C693
 253           chipset found in some Alpha systems
 254
 255           If unsure, say N.
 256
 257 config PATA_EFAR
 258         tristate "EFAR SLC90E66 support"
 259         depends on PCI
 260         help
 261           This option enables support for the EFAR SLC90E66
 262           IDE controller found on some older machines.
 263
 264           If unsure, say N.
 265
 266 config ATA_GENERIC
 267         tristate "Generic ATA support"
 268         depends on PCI
 269         help
 270           This option enables support for generic BIOS configured
 271           ATA controllers via the new ATA layer
 272
 273           If unsure, say N.
 274
 275 config PATA_HPT366
 276         tristate "HPT 366/368 PATA support (Very Experimental)"
 277         depends on PCI && EXPERIMENTAL
 278         help
 279           This option enables support for the HPT 366 and 368
 280           PATA controllers via the new ATA layer.
 281
 282           If unsure, say N.
 283
 284 config PATA_HPT37X
 285         tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
 286         depends on PCI && EXPERIMENTAL
 287         help
 288           This option enables support for the majority of the later HPT
 289           PATA controllers via the new ATA layer.
 290
 291           If unsure, say N.
 292
 293 config PATA_HPT3X2N
 294         tristate "HPT 372N/302N PATA support (Very Experimental)"
 295         depends on PCI && EXPERIMENTAL
 296         help
 297           This option enables support for the N variant HPT PATA
 298           controllers via the new ATA layer
 299
 300           If unsure, say N.
 301
 302 config PATA_HPT3X3
 303         tristate "HPT 343/363 PATA support (Experimental)"
 304         depends on PCI
 305         help
 306           This option enables support for the HPT 343/363
 307           PATA controllers via the new ATA layer
 308
 309           If unsure, say N.
 310
 311 config PATA_ISAPNP
 312         tristate "ISA Plug and Play PATA support (Very Experimental)"
 313         depends on EXPERIMENTAL && ISAPNP
 314         help
 315           This option enables support for ISA plug & play ATA
 316           controllers such as those found on old soundcards.
 317
 318           If unsure, say N.
 319
 320 config PATA_IT821X
 321         tristate "IT8211/2 PATA support (Experimental)"
 322         depends on PCI && EXPERIMENTAL
 323         help
 324           This option enables support for the ITE 8211 and 8212
 325           PATA controllers via the new ATA layer, including RAID
 326           mode.
 327
 328           If unsure, say N.
 329
 330 config PATA_IT8213
 331         tristate "IT8213 PATA support (Experimental)"
 332         depends on PCI && EXPERIMENTAL
 333         help
 334           This option enables support for the ITE 821 PATA
 335           controllers via the new ATA layer.
 336
 337           If unsure, say N.
 338
 339 config PATA_JMICRON
 340         tristate "JMicron PATA support"
 341         depends on PCI
 342         help
 343           Enable support for the JMicron IDE controller, via the new
 344           ATA layer.
 345
 346           If unsure, say N.
 347
 348 config PATA_LEGACY
 349         tristate "Legacy ISA PATA support (Experimental)"
 350         depends on ISA && EXPERIMENTAL
 351         help
 352           This option enables support for ISA/VLB bus legacy PATA
 353           ports and allows them to be accessed via the new ATA layer.
 354
 355           If unsure, say N.
 356
 357 config PATA_TRIFLEX
 358         tristate "Compaq Triflex PATA support"
 359         depends on PCI
 360         help
 361           Enable support for the Compaq 'Triflex' IDE controller as found
 362           on many Compaq Pentium-Pro systems, via the new ATA layer.
 363
 364           If unsure, say N.
 365
 366 config PATA_MARVELL
 367         tristate "Marvell PATA support via legacy mode"
 368         depends on PCI
 369         help
 370           This option enables limited support for the Marvell 88SE6145 ATA
 371           controller.
 372
 373           If unsure, say N.
 374
 375 config PATA_MPC52xx
 376         tristate "Freescale MPC52xx SoC internal IDE"
 377         depends on PPC_MPC52xx
 378         help
 379           This option enables support for integrated IDE controller
 380           of the Freescale MPC52xx SoC.
 381
 382           If unsure, say N.
 383
 384 config PATA_MPIIX
 385         tristate "Intel PATA MPIIX support"
 386         depends on PCI
 387         help
 388           This option enables support for MPIIX PATA support.
 389
 390           If unsure, say N.
 391
 392 config PATA_OLDPIIX
 393         tristate "Intel PATA old PIIX support (Experimental)"
 394         depends on PCI && EXPERIMENTAL
 395         help
 396           This option enables support for old(?) PIIX PATA support.
 397
 398           If unsure, say N.
 399
 400 config PATA_NETCELL
 401         tristate "NETCELL Revolution RAID support"
 402         depends on PCI
 403         help
 404           This option enables support for the Netcell Revolution RAID
 405           PATA controller.
 406
 407           If unsure, say N.
 408
 409 config PATA_NS87410
 410         tristate "Nat Semi NS87410 PATA support (Experimental)"
 411         depends on PCI && EXPERIMENTAL
 412         help
 413           This option enables support for the National Semiconductor
 414           NS87410 PCI-IDE controller.
 415
 416           If unsure, say N.
 417
 418 config PATA_OPTI
 419         tristate "OPTI621/6215 PATA support (Very Experimental)"
 420         depends on PCI && EXPERIMENTAL
 421         help
 422           This option enables full PIO support for the early Opti ATA
 423           controllers found on some old motherboards.
 424
 425           If unsure, say N.
 426
 427 config PATA_OPTIDMA
 428         tristate "OPTI FireStar PATA support (Very Experimental)"
 429         depends on PCI && EXPERIMENTAL
 430         help
 431           This option enables DMA/PIO support for the later OPTi
 432           controllers found on some old motherboards and in some
 433           latops
 434
 435           If unsure, say N.
 436
 437 config PATA_PCMCIA
 438         tristate "PCMCIA PATA support"
 439         depends on PCMCIA
 440         help
 441           This option enables support for PCMCIA ATA interfaces, including
 442           compact flash card adapters via the new ATA layer.
 443
 444           If unsure, say N.
 445
 446 config PATA_PDC_OLD
 447         tristate "Older Promise PATA controller support (Very Experimental)"
 448         depends on PCI && EXPERIMENTAL
 449         help
 450           This option enables support for the Promise 20246, 20262, 20263,
 451           20265 and 20267 adapters.
 452
 453           If unsure, say N.
 454
 455 config PATA_QDI
 456         tristate "QDI VLB PATA support"
 457         depends on ISA
 458         help
 459           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 460
 461 config PATA_RADISYS
 462         tristate "RADISYS 82600 PATA support (Very experimental)"
 463         depends on PCI && EXPERIMENTAL
 464         help
 465           This option enables support for the RADISYS 82600
 466           PATA controllers via the new ATA layer
 467
 468           If unsure, say N.
 469
 470 config PATA_RZ1000
 471         tristate "PC Tech RZ1000 PATA support"
 472         depends on PCI
 473         help
 474           This option enables basic support for the PC Tech RZ1000/1
 475           PATA controllers via the new ATA layer
 476
 477           If unsure, say N.
 478
 479 config PATA_SC1200
 480         tristate "SC1200 PATA support (Raving Lunatic)"
 481         depends on PCI && EXPERIMENTAL
 482         help
 483           This option enables support for the NatSemi/AMD SC1200 SoC
 484           companion chip used with the Geode processor family.
 485
 486           If unsure, say N.
 487
 488 config PATA_SERVERWORKS
 489         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
 490         depends on PCI && EXPERIMENTAL
 491         help
 492           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 493           HT1000 PATA controllers, via the new ATA layer.
 494
 495           If unsure, say N.
 496
 497 config PATA_PDC2027X
 498         tristate "Promise PATA 2027x support"
 499         depends on PCI
 500         help
 501           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 502
 503           If unsure, say N.
 504
 505 config PATA_SIL680
 506         tristate "CMD / Silicon Image 680 PATA support"
 507         depends on PCI
 508         help
 509           This option enables support for CMD / Silicon Image 680 PATA.
 510
 511           If unsure, say N.
 512
 513 config PATA_SIS
 514         tristate "SiS PATA support (Experimental)"
 515         depends on PCI && EXPERIMENTAL
 516         help
 517           This option enables support for SiS PATA controllers
 518
 519           If unsure, say N.
 520
 521 config PATA_VIA
 522         tristate "VIA PATA support"
 523         depends on PCI
 524         help
 525           This option enables support for the VIA PATA interfaces
 526           found on the many VIA chipsets.
 527
 528           If unsure, say N.
 529
 530 config PATA_WINBOND
 531         tristate "Winbond SL82C105 PATA support"
 532         depends on PCI
 533         help
 534           This option enables support for SL82C105 PATA devices found in the
 535           Netwinder and some other systems
 536
 537           If unsure, say N.
 538
 539 config PATA_WINBOND_VLB
 540         tristate "Winbond W83759A VLB PATA support (Experimental)"
 541         depends on ISA && EXPERIMENTAL
 542         help
 543           Support for the Winbond W83759A controller on Vesa Local Bus
 544           systems.
 545
 546 config PATA_PLATFORM
 547         tristate "Generic platform device PATA support"
 548         depends on EMBEDDED
 549         help
 550           This option enables support for generic directly connected ATA
 551           devices commonly found on embedded systems.
 552
 553           If unsure, say N.
 554
 555 config PATA_IXP4XX_CF
 556         tristate "IXP4XX Compact Flash support"
 557         depends on ARCH_IXP4XX
 558         help
 559           This option enables support for a Compact Flash connected on
 560           the ixp4xx expansion bus. This driver had been written for
 561           Loft/Avila boards in mind but can work with others.
 562
 563           If unsure, say N.
 564
 565 config PATA_SCC
 566         tristate "Toshiba's Cell Reference Set IDE support"
 567         depends on PCI
 568         help
 569           This option enables support for the built-in IDE controller on
 570           Toshiba Cell Reference Board.
 571
 572           If unsure, say N.
 573
 574 endif
 575 endmenu
 576