drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_IMX
 101         tristate "Freescale i.MX AHCI SATA support"
 102         depends on SATA_AHCI_PLATFORM && MFD_SYSCON
 103         help
 104           This option enables support for the Freescale i.MX SoC's
 105           onboard AHCI SATA.
 106
 107           If unsure, say N.
 108
 109 config SATA_FSL
 110         tristate "Freescale 3.0Gbps SATA support"
 111         depends on FSL_SOC
 112         help
 113           This option enables support for Freescale 3.0Gbps SATA controller.
 114           It can be found on MPC837x and MPC8315.
 115
 116           If unsure, say N.
 117
 118 config SATA_INIC162X
 119         tristate "Initio 162x SATA support (Very Experimental)"
 120         depends on PCI
 121         help
 122           This option enables support for Initio 162x Serial ATA.
 123
 124 config SATA_ACARD_AHCI
 125         tristate "ACard AHCI variant (ATP 8620)"
 126         depends on PCI
 127         help
 128           This option enables support for Acard.
 129
 130           If unsure, say N.
 131
 132 config SATA_SIL24
 133         tristate "Silicon Image 3124/3132 SATA support"
 134         depends on PCI
 135         help
 136           This option enables support for Silicon Image 3124/3132 Serial ATA.
 137
 138           If unsure, say N.
 139
 140 config ATA_SFF
 141         bool "ATA SFF support (for legacy IDE and PATA)"
 142         default y
 143         help
 144           This option adds support for ATA controllers with SFF
 145           compliant or similar programming interface.
 146
 147           SFF is the legacy IDE interface that has been around since
 148           the dawn of time.  Almost all PATA controllers have an
 149           SFF interface.  Many SATA controllers have an SFF interface
 150           when configured into a legacy compatibility mode.
 151
 152           For users with exclusively modern controllers like AHCI,
 153           Silicon Image 3124, or Marvell 6440, you may choose to
 154           disable this unneeded SFF support.
 155
 156           If unsure, say Y.
 157
 158 if ATA_SFF
 159
 160 comment "SFF controllers with custom DMA interface"
 161
 162 config PDC_ADMA
 163         tristate "Pacific Digital ADMA support"
 164         depends on PCI
 165         help
 166           This option enables support for Pacific Digital ADMA controllers
 167
 168           If unsure, say N.
 169
 170 config PATA_OCTEON_CF
 171         tristate "OCTEON Boot Bus Compact Flash support"
 172         depends on CAVIUM_OCTEON_SOC
 173         help
 174           This option enables a polled compact flash driver for use with
 175           compact flash cards attached to the OCTEON boot bus.
 176
 177           If unsure, say N.
 178
 179 config SATA_QSTOR
 180         tristate "Pacific Digital SATA QStor support"
 181         depends on PCI
 182         help
 183           This option enables support for Pacific Digital Serial ATA QStor.
 184
 185           If unsure, say N.
 186
 187 config SATA_SX4
 188         tristate "Promise SATA SX4 support (Experimental)"
 189         depends on PCI
 190         help
 191           This option enables support for Promise Serial ATA SX4.
 192
 193           If unsure, say N.
 194
 195 config ATA_BMDMA
 196         bool "ATA BMDMA support"
 197         default y
 198         help
 199           This option adds support for SFF ATA controllers with BMDMA
 200           capability.  BMDMA stands for bus-master DMA and is the
 201           de facto DMA interface for SFF controllers.
 202
 203           If unsure, say Y.
 204
 205 if ATA_BMDMA
 206
 207 comment "SATA SFF controllers with BMDMA"
 208
 209 config ATA_PIIX
 210         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 211         depends on PCI
 212         help
 213           This option enables support for ICH5/6/7/8 Serial ATA
 214           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 215           host controllers.
 216
 217           If unsure, say N.
 218
 219 config SATA_DWC
 220         tristate "DesignWare Cores SATA support"
 221         depends on 460EX
 222         help
 223           This option enables support for the on-chip SATA controller of the
 224           AppliedMicro processor 460EX.
 225
 226           If unsure, say N.
 227
 228 config SATA_DWC_DEBUG
 229         bool "Debugging driver version"
 230         depends on SATA_DWC
 231         help
 232           This option enables debugging output in the driver.
 233
 234 config SATA_DWC_VDEBUG
 235         bool "Verbose debug output"
 236         depends on SATA_DWC_DEBUG
 237         help
 238           This option enables the taskfile dumping and NCQ debugging.
 239
 240 config SATA_HIGHBANK
 241         tristate "Calxeda Highbank SATA support"
 242         help
 243           This option enables support for the Calxeda Highbank SoC's
 244           onboard SATA.
 245
 246           If unsure, say N.
 247
 248 config SATA_MV
 249         tristate "Marvell SATA support"
 250         help
 251           This option enables support for the Marvell Serial ATA family.
 252           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 253           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 254
 255           If unsure, say N.
 256
 257 config SATA_NV
 258         tristate "NVIDIA SATA support"
 259         depends on PCI
 260         help
 261           This option enables support for NVIDIA Serial ATA.
 262
 263           If unsure, say N.
 264
 265 config SATA_PROMISE
 266         tristate "Promise SATA TX2/TX4 support"
 267         depends on PCI
 268         help
 269           This option enables support for Promise Serial ATA TX2/TX4.
 270
 271           If unsure, say N.
 272
 273 config SATA_RCAR
 274         tristate "Renesas R-Car SATA support"
 275         help
 276           This option enables support for Renesas R-Car Serial ATA.
 277
 278           If unsure, say N.
 279
 280 config SATA_SIL
 281         tristate "Silicon Image SATA support"
 282         depends on PCI
 283         help
 284           This option enables support for Silicon Image Serial ATA.
 285
 286           If unsure, say N.
 287
 288 config SATA_SIS
 289         tristate "SiS 964/965/966/180 SATA support"
 290         depends on PCI
 291         select PATA_SIS
 292         help
 293           This option enables support for SiS Serial ATA on
 294           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 295           The PATA support for SiS 180 requires additionally to
 296           enable the PATA_SIS driver in the config.
 297           If unsure, say N.
 298
 299 config SATA_SVW
 300         tristate "ServerWorks Frodo / Apple K2 SATA support"
 301         depends on PCI
 302         help
 303           This option enables support for Broadcom/Serverworks/Apple K2
 304           SATA support.
 305
 306           If unsure, say N.
 307
 308 config SATA_ULI
 309         tristate "ULi Electronics SATA support"
 310         depends on PCI
 311         help
 312           This option enables support for ULi Electronics SATA.
 313
 314           If unsure, say N.
 315
 316 config SATA_VIA
 317         tristate "VIA SATA support"
 318         depends on PCI
 319         help
 320           This option enables support for VIA Serial ATA.
 321
 322           If unsure, say N.
 323
 324 config SATA_VITESSE
 325         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 326         depends on PCI
 327         help
 328           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 329
 330           If unsure, say N.
 331
 332 comment "PATA SFF controllers with BMDMA"
 333
 334 config PATA_ALI
 335         tristate "ALi PATA support"
 336         depends on PCI
 337         help
 338           This option enables support for the ALi ATA interfaces
 339           found on the many ALi chipsets.
 340
 341           If unsure, say N.
 342
 343 config PATA_AMD
 344         tristate "AMD/NVidia PATA support"
 345         depends on PCI
 346         help
 347           This option enables support for the AMD and NVidia PATA
 348           interfaces found on the chipsets for Athlon/Athlon64.
 349
 350           If unsure, say N.
 351
 352 config PATA_ARASAN_CF
 353         tristate "ARASAN CompactFlash PATA Controller Support"
 354         depends on DMADEVICES
 355         select DMA_ENGINE
 356         help
 357           Say Y here to support the ARASAN CompactFlash PATA controller
 358
 359 config PATA_ARTOP
 360         tristate "ARTOP 6210/6260 PATA support"
 361         depends on PCI
 362         help
 363           This option enables support for ARTOP PATA controllers.
 364
 365           If unsure, say N.
 366
 367 config PATA_ATIIXP
 368         tristate "ATI PATA support"
 369         depends on PCI
 370         help
 371           This option enables support for the ATI ATA interfaces
 372           found on the many ATI chipsets.
 373
 374           If unsure, say N.
 375
 376 config PATA_ATP867X
 377         tristate "ARTOP/Acard ATP867X PATA support"
 378         depends on PCI
 379         help
 380           This option enables support for ARTOP/Acard ATP867X PATA
 381           controllers.
 382
 383           If unsure, say N.
 384
 385 config PATA_BF54X
 386         tristate "Blackfin 54x ATAPI support"
 387         depends on BF542 || BF548 || BF549
 388         help
 389           This option enables support for the built-in ATAPI controller on
 390           Blackfin 54x family chips.
 391
 392           If unsure, say N.
 393
 394 config PATA_CMD64X
 395         tristate "CMD64x PATA support"
 396         depends on PCI
 397         help
 398           This option enables support for the CMD64x series chips
 399           except for the CMD640.
 400
 401           If unsure, say N.
 402
 403 config PATA_CS5520
 404         tristate "CS5510/5520 PATA support"
 405         depends on PCI
 406         help
 407           This option enables support for the Cyrix 5510/5520
 408           companion chip used with the MediaGX/Geode processor family.
 409
 410           If unsure, say N.
 411
 412 config PATA_CS5530
 413         tristate "CS5530 PATA support"
 414         depends on PCI
 415         help
 416           This option enables support for the Cyrix/NatSemi/AMD CS5530
 417           companion chip used with the MediaGX/Geode processor family.
 418
 419           If unsure, say N.
 420
 421 config PATA_CS5535
 422         tristate "CS5535 PATA support (Experimental)"
 423         depends on PCI && X86 && !X86_64
 424         help
 425           This option enables support for the NatSemi/AMD CS5535
 426           companion chip used with the Geode processor family.
 427
 428           If unsure, say N.
 429
 430 config PATA_CS5536
 431         tristate "CS5536 PATA support"
 432         depends on PCI
 433         help
 434           This option enables support for the AMD CS5536
 435           companion chip used with the Geode LX processor family.
 436
 437           If unsure, say N.
 438
 439 config PATA_CYPRESS
 440         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 441         depends on PCI
 442         help
 443           This option enables support for the Cypress/Contaq CY82C693
 444           chipset found in some Alpha systems
 445
 446           If unsure, say N.
 447
 448 config PATA_EFAR
 449         tristate "EFAR SLC90E66 support"
 450         depends on PCI
 451         help
 452           This option enables support for the EFAR SLC90E66
 453           IDE controller found on some older machines.
 454
 455           If unsure, say N.
 456
 457 config PATA_EP93XX
 458         tristate "Cirrus Logic EP93xx PATA support"
 459         depends on ARCH_EP93XX
 460         help
 461           This option enables support for the PATA controller in
 462           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 463
 464           If unsure, say N.
 465
 466 config PATA_HPT366
 467         tristate "HPT 366/368 PATA support"
 468         depends on PCI
 469         help
 470           This option enables support for the HPT 366 and 368
 471           PATA controllers via the new ATA layer.
 472
 473           If unsure, say N.
 474
 475 config PATA_HPT37X
 476         tristate "HPT 370/370A/371/372/374/302 PATA support"
 477         depends on PCI
 478         help
 479           This option enables support for the majority of the later HPT
 480           PATA controllers via the new ATA layer.
 481
 482           If unsure, say N.
 483
 484 config PATA_HPT3X2N
 485         tristate "HPT 371N/372N/302N PATA support"
 486         depends on PCI
 487         help
 488           This option enables support for the N variant HPT PATA
 489           controllers via the new ATA layer.
 490
 491           If unsure, say N.
 492
 493 config PATA_HPT3X3
 494         tristate "HPT 343/363 PATA support"
 495         depends on PCI
 496         help
 497           This option enables support for the HPT 343/363
 498           PATA controllers via the new ATA layer
 499
 500           If unsure, say N.
 501
 502 config PATA_HPT3X3_DMA
 503         bool "HPT 343/363 DMA support"
 504         depends on PATA_HPT3X3
 505         help
 506           This option enables DMA support for the HPT343/363
 507           controllers. Enable with care as there are still some
 508           problems with DMA on this chipset.
 509
 510 config PATA_ICSIDE
 511         tristate "Acorn ICS PATA support"
 512         depends on ARM && ARCH_ACORN
 513         help
 514           On Acorn systems, say Y here if you wish to use the ICS PATA
 515           interface card.  This is not required for ICS partition support.
 516           If you are unsure, say N to this.
 517
 518 config PATA_IMX
 519         tristate "PATA support for Freescale iMX"
 520         depends on ARCH_MXC
 521         help
 522           This option enables support for the PATA host available on Freescale
 523           iMX SoCs.
 524
 525           If unsure, say N.
 526
 527 config PATA_IT8213
 528         tristate "IT8213 PATA support (Experimental)"
 529         depends on PCI
 530         help
 531           This option enables support for the ITE 821 PATA
 532           controllers via the new ATA layer.
 533
 534           If unsure, say N.
 535
 536 config PATA_IT821X
 537         tristate "IT8211/2 PATA support"
 538         depends on PCI
 539         help
 540           This option enables support for the ITE 8211 and 8212
 541           PATA controllers via the new ATA layer, including RAID
 542           mode.
 543
 544           If unsure, say N.
 545
 546 config PATA_JMICRON
 547         tristate "JMicron PATA support"
 548         depends on PCI
 549         help
 550           Enable support for the JMicron IDE controller, via the new
 551           ATA layer.
 552
 553           If unsure, say N.
 554
 555 config PATA_MACIO
 556         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 557         depends on PPC_PMAC
 558         help
 559           Most IDE capable PowerMacs have IDE busses driven by a variant
 560           of this controller which is part of the Apple chipset used on
 561           most PowerMac models. Some models have multiple busses using
 562           different chipsets, though generally, MacIO is one of them.
 563
 564 config PATA_MARVELL
 565         tristate "Marvell PATA support via legacy mode"
 566         depends on PCI
 567         help
 568           This option enables limited support for the Marvell 88SE61xx ATA
 569           controllers. If you wish to use only the SATA ports then select
 570           the AHCI driver alone. If you wish to the use the PATA port or
 571           both SATA and PATA include this driver.
 572
 573           If unsure, say N.
 574
 575 config PATA_MPC52xx
 576         tristate "Freescale MPC52xx SoC internal IDE"
 577         depends on PPC_MPC52xx && PPC_BESTCOMM
 578         select PPC_BESTCOMM_ATA
 579         help
 580           This option enables support for integrated IDE controller
 581           of the Freescale MPC52xx SoC.
 582
 583           If unsure, say N.
 584
 585 config PATA_NETCELL
 586         tristate "NETCELL Revolution RAID support"
 587         depends on PCI
 588         help
 589           This option enables support for the Netcell Revolution RAID
 590           PATA controller.
 591
 592           If unsure, say N.
 593
 594 config PATA_NINJA32
 595         tristate "Ninja32/Delkin Cardbus ATA support"
 596         depends on PCI
 597         help
 598           This option enables support for the Ninja32, Delkin and
 599           possibly other brands of Cardbus ATA adapter
 600
 601           If unsure, say N.
 602
 603 config PATA_NS87415
 604         tristate "Nat Semi NS87415 PATA support"
 605         depends on PCI
 606         help
 607           This option enables support for the National Semiconductor
 608           NS87415 PCI-IDE controller.
 609
 610           If unsure, say N.
 611
 612 config PATA_OLDPIIX
 613         tristate "Intel PATA old PIIX support"
 614         depends on PCI
 615         help
 616           This option enables support for early PIIX PATA support.
 617
 618           If unsure, say N.
 619
 620 config PATA_OPTIDMA
 621         tristate "OPTI FireStar PATA support (Very Experimental)"
 622         depends on PCI
 623         help
 624           This option enables DMA/PIO support for the later OPTi
 625           controllers found on some old motherboards and in some
 626           laptops.
 627
 628           If unsure, say N.
 629
 630 config PATA_PDC2027X
 631         tristate "Promise PATA 2027x support"
 632         depends on PCI
 633         help
 634           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 635
 636           If unsure, say N.
 637
 638 config PATA_PDC_OLD
 639         tristate "Older Promise PATA controller support"
 640         depends on PCI
 641         help
 642           This option enables support for the Promise 20246, 20262, 20263,
 643           20265 and 20267 adapters.
 644
 645           If unsure, say N.
 646
 647 config PATA_RADISYS
 648         tristate "RADISYS 82600 PATA support (Experimental)"
 649         depends on PCI
 650         help
 651           This option enables support for the RADISYS 82600
 652           PATA controllers via the new ATA layer
 653
 654           If unsure, say N.
 655
 656 config PATA_RDC
 657         tristate "RDC PATA support"
 658         depends on PCI
 659         help
 660           This option enables basic support for the later RDC PATA controllers
 661           controllers via the new ATA layer. For the RDC 1010, you need to
 662           enable the IT821X driver instead.
 663
 664           If unsure, say N.
 665
 666 config PATA_SC1200
 667         tristate "SC1200 PATA support"
 668         depends on PCI
 669         help
 670           This option enables support for the NatSemi/AMD SC1200 SoC
 671           companion chip used with the Geode processor family.
 672
 673           If unsure, say N.
 674
 675 config PATA_SCC
 676         tristate "Toshiba's Cell Reference Set IDE support"
 677         depends on PCI && PPC_CELLEB
 678         help
 679           This option enables support for the built-in IDE controller on
 680           Toshiba Cell Reference Board.
 681
 682           If unsure, say N.
 683
 684 config PATA_SCH
 685         tristate "Intel SCH PATA support"
 686         depends on PCI
 687         help
 688           This option enables support for Intel SCH PATA on the Intel
 689           SCH (US15W, US15L, UL11L) series host controllers.
 690
 691           If unsure, say N.
 692
 693 config PATA_SERVERWORKS
 694         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 695         depends on PCI
 696         help
 697           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 698           HT1000 PATA controllers, via the new ATA layer.
 699
 700           If unsure, say N.
 701
 702 config PATA_SIL680
 703         tristate "CMD / Silicon Image 680 PATA support"
 704         depends on PCI
 705         help
 706           This option enables support for CMD / Silicon Image 680 PATA.
 707
 708           If unsure, say N.
 709
 710 config PATA_SIS
 711         tristate "SiS PATA support"
 712         depends on PCI
 713         help
 714           This option enables support for SiS PATA controllers
 715
 716           If unsure, say N.
 717
 718 config PATA_TOSHIBA
 719         tristate "Toshiba Piccolo support (Experimental)"
 720         depends on PCI
 721         help
 722           Support for the Toshiba Piccolo controllers. Currently only the
 723           primary channel is supported by this driver.
 724
 725           If unsure, say N.
 726
 727 config PATA_TRIFLEX
 728         tristate "Compaq Triflex PATA support"
 729         depends on PCI
 730         help
 731           Enable support for the Compaq 'Triflex' IDE controller as found
 732           on many Compaq Pentium-Pro systems, via the new ATA layer.
 733
 734           If unsure, say N.
 735
 736 config PATA_VIA
 737         tristate "VIA PATA support"
 738         depends on PCI
 739         help
 740           This option enables support for the VIA PATA interfaces
 741           found on the many VIA chipsets.
 742
 743           If unsure, say N.
 744
 745 config PATA_PXA
 746         tristate "PXA DMA-capable PATA support"
 747         depends on ARCH_PXA
 748         help
 749           This option enables support for harddrive attached to PXA CPU's bus.
 750
 751           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 752                 is not capable of doing MWDMA, use pata_platform instead.
 753
 754           If unsure, say N.
 755
 756 config PATA_WINBOND
 757         tristate "Winbond SL82C105 PATA support"
 758         depends on PCI
 759         help
 760           This option enables support for SL82C105 PATA devices found in the
 761           Netwinder and some other systems
 762
 763           If unsure, say N.
 764
 765 endif # ATA_BMDMA
 766
 767 comment "PIO-only SFF controllers"
 768
 769 config PATA_AT32
 770         tristate "Atmel AVR32 PATA support (Experimental)"
 771         depends on AVR32 && PLATFORM_AT32AP
 772         help
 773           This option enables support for the IDE devices on the
 774           Atmel AT32AP platform.
 775
 776           If unsure, say N.
 777
 778 config PATA_AT91
 779         tristate "PATA support for AT91SAM9260"
 780         depends on ARM && ARCH_AT91
 781         help
 782           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 783
 784           If unsure, say N.
 785
 786 config PATA_CMD640_PCI
 787         tristate "CMD640 PCI PATA support (Experimental)"
 788         depends on PCI
 789         help
 790           This option enables support for the CMD640 PCI IDE
 791           interface chip. Only the primary channel is currently
 792           supported.
 793
 794           If unsure, say N.
 795
 796 config PATA_ISAPNP
 797         tristate "ISA Plug and Play PATA support"
 798         depends on ISAPNP
 799         help
 800           This option enables support for ISA plug & play ATA
 801           controllers such as those found on old soundcards.
 802
 803           If unsure, say N.
 804
 805 config PATA_IXP4XX_CF
 806         tristate "IXP4XX Compact Flash support"
 807         depends on ARCH_IXP4XX
 808         help
 809           This option enables support for a Compact Flash connected on
 810           the ixp4xx expansion bus. This driver had been written for
 811           Loft/Avila boards in mind but can work with others.
 812
 813           If unsure, say N.
 814
 815 config PATA_MPIIX
 816         tristate "Intel PATA MPIIX support"
 817         depends on PCI
 818         help
 819           This option enables support for MPIIX PATA support.
 820
 821           If unsure, say N.
 822
 823 config PATA_NS87410
 824         tristate "Nat Semi NS87410 PATA support"
 825         depends on PCI
 826         help
 827           This option enables support for the National Semiconductor
 828           NS87410 PCI-IDE controller.
 829
 830           If unsure, say N.
 831
 832 config PATA_OPTI
 833         tristate "OPTI621/6215 PATA support (Very Experimental)"
 834         depends on PCI
 835         help
 836           This option enables full PIO support for the early Opti ATA
 837           controllers found on some old motherboards.
 838
 839           If unsure, say N.
 840
 841 config PATA_PALMLD
 842         tristate "Palm LifeDrive PATA support"
 843         depends on MACH_PALMLD
 844         help
 845           This option enables support for Palm LifeDrive's internal ATA
 846           port via the new ATA layer.
 847
 848           If unsure, say N.
 849
 850 config PATA_PCMCIA
 851         tristate "PCMCIA PATA support"
 852         depends on PCMCIA
 853         help
 854           This option enables support for PCMCIA ATA interfaces, including
 855           compact flash card adapters via the new ATA layer.
 856
 857           If unsure, say N.
 858
 859 config PATA_PLATFORM
 860         tristate "Generic platform device PATA support"
 861         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 862         help
 863           This option enables support for generic directly connected ATA
 864           devices commonly found on embedded systems.
 865
 866           If unsure, say N.
 867
 868 config PATA_OF_PLATFORM
 869         tristate "OpenFirmware platform device PATA support"
 870         depends on PATA_PLATFORM && OF
 871         help
 872           This option enables support for generic directly connected ATA
 873           devices commonly found on embedded systems with OpenFirmware
 874           bindings.
 875
 876           If unsure, say N.
 877
 878 config PATA_QDI
 879         tristate "QDI VLB PATA support"
 880         depends on ISA
 881         select PATA_LEGACY
 882         help
 883           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 884
 885 config PATA_RB532
 886         tristate "RouterBoard 532 PATA CompactFlash support"
 887         depends on MIKROTIK_RB532
 888         help
 889           This option enables support for the RouterBoard 532
 890           PATA CompactFlash controller.
 891
 892           If unsure, say N.
 893
 894 config PATA_RZ1000
 895         tristate "PC Tech RZ1000 PATA support"
 896         depends on PCI
 897         help
 898           This option enables basic support for the PC Tech RZ1000/1
 899           PATA controllers via the new ATA layer
 900
 901           If unsure, say N.
 902
 903 config PATA_SAMSUNG_CF
 904         tristate "Samsung SoC PATA support"
 905         depends on SAMSUNG_DEV_IDE
 906         help
 907           This option enables basic support for Samsung's S3C/S5P board
 908           PATA controllers via the new ATA layer
 909
 910           If unsure, say N.
 911
 912 config PATA_WINBOND_VLB
 913         tristate "Winbond W83759A VLB PATA support (Experimental)"
 914         depends on ISA
 915         select PATA_LEGACY
 916         help
 917           Support for the Winbond W83759A controller on Vesa Local Bus
 918           systems.
 919
 920 comment "Generic fallback / legacy drivers"
 921
 922 config PATA_ACPI
 923         tristate "ACPI firmware driver for PATA"
 924         depends on ATA_ACPI && ATA_BMDMA
 925         help
 926           This option enables an ACPI method driver which drives
 927           motherboard PATA controller interfaces through the ACPI
 928           firmware in the BIOS. This driver can sometimes handle
 929           otherwise unsupported hardware.
 930
 931 config ATA_GENERIC
 932         tristate "Generic ATA support"
 933         depends on PCI && ATA_BMDMA
 934         help
 935           This option enables support for generic BIOS configured
 936           ATA controllers via the new ATA layer
 937
 938           If unsure, say N.
 939
 940 config PATA_LEGACY
 941         tristate "Legacy ISA PATA support (Experimental)"
 942         depends on (ISA || PCI)
 943         help
 944           This option enables support for ISA/VLB/PCI bus legacy PATA
 945           ports and allows them to be accessed via the new ATA layer.
 946
 947           If unsure, say N.
 948
 949 endif # ATA_SFF
 950 endif # ATA