drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_BRCMSTB
 102         tristate "Broadcom STB AHCI SATA support"
 103         depends on ARCH_BRCMSTB || BMIPS_GENERIC
 104         help
 105           This option enables support for the AHCI SATA3 controller found on
 106           STB SoC's.
 107
 108           If unsure, say N.
 109
 110 config AHCI_DA850
 111         tristate "DaVinci DA850 AHCI SATA support"
 112         depends on ARCH_DAVINCI_DA850
 113         help
 114           This option enables support for the DaVinci DA850 SoC's
 115           onboard AHCI SATA.
 116
 117           If unsure, say N.
 118
 119 config AHCI_ST
 120         tristate "ST AHCI SATA support"
 121         depends on ARCH_STI
 122         help
 123           This option enables support for ST AHCI SATA controller.
 124
 125           If unsure, say N.
 126
 127 config AHCI_IMX
 128         tristate "Freescale i.MX AHCI SATA support"
 129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 130         help
 131           This option enables support for the Freescale i.MX SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_CEVA
 137         tristate "CEVA AHCI SATA support"
 138         depends on OF
 139         help
 140           This option enables support for the CEVA AHCI SATA.
 141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 142
 143           If unsure, say N.
 144
 145 config AHCI_MVEBU
 146         tristate "Marvell EBU AHCI SATA support"
 147         depends on ARCH_MVEBU
 148         help
 149           This option enables support for the Marvebu EBU SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_OCTEON
 155         tristate "Cavium Octeon Soc Serial ATA"
 156         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 157         default y
 158         help
 159           This option enables support for Cavium Octeon SoC Serial ATA.
 160
 161           If unsure, say N.
 162
 163 config AHCI_SUNXI
 164         tristate "Allwinner sunxi AHCI SATA support"
 165         depends on ARCH_SUNXI
 166         help
 167           This option enables support for the Allwinner sunxi SoC's
 168           onboard AHCI SATA.
 169
 170           If unsure, say N.
 171
 172 config AHCI_TEGRA
 173         tristate "NVIDIA Tegra124 AHCI SATA support"
 174         depends on ARCH_TEGRA
 175         help
 176           This option enables support for the NVIDIA Tegra124 SoC's
 177           onboard AHCI SATA.
 178
 179           If unsure, say N.
 180
 181 config AHCI_XGENE
 182         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 183         depends on PHY_XGENE
 184         help
 185          This option enables support for APM X-Gene SoC SATA host controller.
 186
 187 config AHCI_QORIQ
 188         tristate "Freescale QorIQ AHCI SATA support"
 189         depends on OF
 190         help
 191           This option enables support for the Freescale QorIQ AHCI SoC's
 192           onboard AHCI SATA.
 193
 194           If unsure, say N.
 195
 196 config SATA_FSL
 197         tristate "Freescale 3.0Gbps SATA support"
 198         depends on FSL_SOC
 199         help
 200           This option enables support for Freescale 3.0Gbps SATA controller.
 201           It can be found on MPC837x and MPC8315.
 202
 203           If unsure, say N.
 204
 205 config SATA_INIC162X
 206         tristate "Initio 162x SATA support (Very Experimental)"
 207         depends on PCI
 208         help
 209           This option enables support for Initio 162x Serial ATA.
 210
 211 config SATA_ACARD_AHCI
 212         tristate "ACard AHCI variant (ATP 8620)"
 213         depends on PCI
 214         help
 215           This option enables support for Acard.
 216
 217           If unsure, say N.
 218
 219 config SATA_SIL24
 220         tristate "Silicon Image 3124/3132 SATA support"
 221         depends on PCI
 222         help
 223           This option enables support for Silicon Image 3124/3132 Serial ATA.
 224
 225           If unsure, say N.
 226
 227 config ATA_SFF
 228         bool "ATA SFF support (for legacy IDE and PATA)"
 229         default y
 230         help
 231           This option adds support for ATA controllers with SFF
 232           compliant or similar programming interface.
 233
 234           SFF is the legacy IDE interface that has been around since
 235           the dawn of time.  Almost all PATA controllers have an
 236           SFF interface.  Many SATA controllers have an SFF interface
 237           when configured into a legacy compatibility mode.
 238
 239           For users with exclusively modern controllers like AHCI,
 240           Silicon Image 3124, or Marvell 6440, you may choose to
 241           disable this unneeded SFF support.
 242
 243           If unsure, say Y.
 244
 245 if ATA_SFF
 246
 247 comment "SFF controllers with custom DMA interface"
 248
 249 config PDC_ADMA
 250         tristate "Pacific Digital ADMA support"
 251         depends on PCI
 252         help
 253           This option enables support for Pacific Digital ADMA controllers
 254
 255           If unsure, say N.
 256
 257 config PATA_OCTEON_CF
 258         tristate "OCTEON Boot Bus Compact Flash support"
 259         depends on CAVIUM_OCTEON_SOC
 260         help
 261           This option enables a polled compact flash driver for use with
 262           compact flash cards attached to the OCTEON boot bus.
 263
 264           If unsure, say N.
 265
 266 config SATA_QSTOR
 267         tristate "Pacific Digital SATA QStor support"
 268         depends on PCI
 269         help
 270           This option enables support for Pacific Digital Serial ATA QStor.
 271
 272           If unsure, say N.
 273
 274 config SATA_SX4
 275         tristate "Promise SATA SX4 support (Experimental)"
 276         depends on PCI
 277         help
 278           This option enables support for Promise Serial ATA SX4.
 279
 280           If unsure, say N.
 281
 282 config ATA_BMDMA
 283         bool "ATA BMDMA support"
 284         default y
 285         help
 286           This option adds support for SFF ATA controllers with BMDMA
 287           capability.  BMDMA stands for bus-master DMA and is the
 288           de facto DMA interface for SFF controllers.
 289
 290           If unsure, say Y.
 291
 292 if ATA_BMDMA
 293
 294 comment "SATA SFF controllers with BMDMA"
 295
 296 config ATA_PIIX
 297         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 298         depends on PCI
 299         help
 300           This option enables support for ICH5/6/7/8 Serial ATA
 301           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 302           host controllers.
 303
 304           If unsure, say N.
 305
 306 config SATA_DWC
 307         tristate "DesignWare Cores SATA support"
 308         depends on 460EX
 309         select DW_DMAC
 310         help
 311           This option enables support for the on-chip SATA controller of the
 312           AppliedMicro processor 460EX.
 313
 314           If unsure, say N.
 315
 316 config SATA_DWC_DEBUG
 317         bool "Debugging driver version"
 318         depends on SATA_DWC
 319         help
 320           This option enables debugging output in the driver.
 321
 322 config SATA_DWC_VDEBUG
 323         bool "Verbose debug output"
 324         depends on SATA_DWC_DEBUG
 325         help
 326           This option enables the taskfile dumping and NCQ debugging.
 327
 328 config SATA_HIGHBANK
 329         tristate "Calxeda Highbank SATA support"
 330         depends on ARCH_HIGHBANK || COMPILE_TEST
 331         help
 332           This option enables support for the Calxeda Highbank SoC's
 333           onboard SATA.
 334
 335           If unsure, say N.
 336
 337 config SATA_MV
 338         tristate "Marvell SATA support"
 339         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 340                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 341         select GENERIC_PHY
 342         help
 343           This option enables support for the Marvell Serial ATA family.
 344           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 345           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 346
 347           If unsure, say N.
 348
 349 config SATA_NV
 350         tristate "NVIDIA SATA support"
 351         depends on PCI
 352         help
 353           This option enables support for NVIDIA Serial ATA.
 354
 355           If unsure, say N.
 356
 357 config SATA_PROMISE
 358         tristate "Promise SATA TX2/TX4 support"
 359         depends on PCI
 360         help
 361           This option enables support for Promise Serial ATA TX2/TX4.
 362
 363           If unsure, say N.
 364
 365 config SATA_RCAR
 366         tristate "Renesas R-Car SATA support"
 367         depends on ARCH_RENESAS || COMPILE_TEST
 368         help
 369           This option enables support for Renesas R-Car Serial ATA.
 370
 371           If unsure, say N.
 372
 373 config SATA_SIL
 374         tristate "Silicon Image SATA support"
 375         depends on PCI
 376         help
 377           This option enables support for Silicon Image Serial ATA.
 378
 379           If unsure, say N.
 380
 381 config SATA_SIS
 382         tristate "SiS 964/965/966/180 SATA support"
 383         depends on PCI
 384         select PATA_SIS
 385         help
 386           This option enables support for SiS Serial ATA on
 387           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 388           The PATA support for SiS 180 requires additionally to
 389           enable the PATA_SIS driver in the config.
 390           If unsure, say N.
 391
 392 config SATA_SVW
 393         tristate "ServerWorks Frodo / Apple K2 SATA support"
 394         depends on PCI
 395         help
 396           This option enables support for Broadcom/Serverworks/Apple K2
 397           SATA support.
 398
 399           If unsure, say N.
 400
 401 config SATA_ULI
 402         tristate "ULi Electronics SATA support"
 403         depends on PCI
 404         help
 405           This option enables support for ULi Electronics SATA.
 406
 407           If unsure, say N.
 408
 409 config SATA_VIA
 410         tristate "VIA SATA support"
 411         depends on PCI
 412         help
 413           This option enables support for VIA Serial ATA.
 414
 415           If unsure, say N.
 416
 417 config SATA_VITESSE
 418         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 419         depends on PCI
 420         help
 421           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 422
 423           If unsure, say N.
 424
 425 comment "PATA SFF controllers with BMDMA"
 426
 427 config PATA_ALI
 428         tristate "ALi PATA support"
 429         depends on PCI
 430         help
 431           This option enables support for the ALi ATA interfaces
 432           found on the many ALi chipsets.
 433
 434           If unsure, say N.
 435
 436 config PATA_AMD
 437         tristate "AMD/NVidia PATA support"
 438         depends on PCI
 439         help
 440           This option enables support for the AMD and NVidia PATA
 441           interfaces found on the chipsets for Athlon/Athlon64.
 442
 443           If unsure, say N.
 444
 445 config PATA_ARASAN_CF
 446         tristate "ARASAN CompactFlash PATA Controller Support"
 447         depends on ARCH_SPEAR13XX || COMPILE_TEST
 448         depends on DMADEVICES
 449         select DMA_ENGINE
 450         help
 451           Say Y here to support the ARASAN CompactFlash PATA controller
 452
 453 config PATA_ARTOP
 454         tristate "ARTOP 6210/6260 PATA support"
 455         depends on PCI
 456         help
 457           This option enables support for ARTOP PATA controllers.
 458
 459           If unsure, say N.
 460
 461 config PATA_ATIIXP
 462         tristate "ATI PATA support"
 463         depends on PCI
 464         help
 465           This option enables support for the ATI ATA interfaces
 466           found on the many ATI chipsets.
 467
 468           If unsure, say N.
 469
 470 config PATA_ATP867X
 471         tristate "ARTOP/Acard ATP867X PATA support"
 472         depends on PCI
 473         help
 474           This option enables support for ARTOP/Acard ATP867X PATA
 475           controllers.
 476
 477           If unsure, say N.
 478
 479 config PATA_BF54X
 480         tristate "Blackfin 54x ATAPI support"
 481         depends on BF542 || BF548 || BF549
 482         help
 483           This option enables support for the built-in ATAPI controller on
 484           Blackfin 54x family chips.
 485
 486           If unsure, say N.
 487
 488 config PATA_CMD64X
 489         tristate "CMD64x PATA support"
 490         depends on PCI
 491         help
 492           This option enables support for the CMD64x series chips
 493           except for the CMD640.
 494
 495           If unsure, say N.
 496
 497 config PATA_CS5520
 498         tristate "CS5510/5520 PATA support"
 499         depends on PCI && (X86_32 || COMPILE_TEST)
 500         help
 501           This option enables support for the Cyrix 5510/5520
 502           companion chip used with the MediaGX/Geode processor family.
 503
 504           If unsure, say N.
 505
 506 config PATA_CS5530
 507         tristate "CS5530 PATA support"
 508         depends on PCI && (X86_32 || COMPILE_TEST)
 509         help
 510           This option enables support for the Cyrix/NatSemi/AMD CS5530
 511           companion chip used with the MediaGX/Geode processor family.
 512
 513           If unsure, say N.
 514
 515 config PATA_CS5535
 516         tristate "CS5535 PATA support (Experimental)"
 517         depends on PCI && X86_32
 518         help
 519           This option enables support for the NatSemi/AMD CS5535
 520           companion chip used with the Geode processor family.
 521
 522           If unsure, say N.
 523
 524 config PATA_CS5536
 525         tristate "CS5536 PATA support"
 526         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 527         help
 528           This option enables support for the AMD CS5536
 529           companion chip used with the Geode LX processor family.
 530
 531           If unsure, say N.
 532
 533 config PATA_CYPRESS
 534         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 535         depends on PCI
 536         help
 537           This option enables support for the Cypress/Contaq CY82C693
 538           chipset found in some Alpha systems
 539
 540           If unsure, say N.
 541
 542 config PATA_EFAR
 543         tristate "EFAR SLC90E66 support"
 544         depends on PCI
 545         help
 546           This option enables support for the EFAR SLC90E66
 547           IDE controller found on some older machines.
 548
 549           If unsure, say N.
 550
 551 config PATA_EP93XX
 552         tristate "Cirrus Logic EP93xx PATA support"
 553         depends on ARCH_EP93XX
 554         help
 555           This option enables support for the PATA controller in
 556           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 557
 558           If unsure, say N.
 559
 560 config PATA_HPT366
 561         tristate "HPT 366/368 PATA support"
 562         depends on PCI
 563         help
 564           This option enables support for the HPT 366 and 368
 565           PATA controllers via the new ATA layer.
 566
 567           If unsure, say N.
 568
 569 config PATA_HPT37X
 570         tristate "HPT 370/370A/371/372/374/302 PATA support"
 571         depends on PCI
 572         help
 573           This option enables support for the majority of the later HPT
 574           PATA controllers via the new ATA layer.
 575
 576           If unsure, say N.
 577
 578 config PATA_HPT3X2N
 579         tristate "HPT 371N/372N/302N PATA support"
 580         depends on PCI
 581         help
 582           This option enables support for the N variant HPT PATA
 583           controllers via the new ATA layer.
 584
 585           If unsure, say N.
 586
 587 config PATA_HPT3X3
 588         tristate "HPT 343/363 PATA support"
 589         depends on PCI
 590         help
 591           This option enables support for the HPT 343/363
 592           PATA controllers via the new ATA layer
 593
 594           If unsure, say N.
 595
 596 config PATA_HPT3X3_DMA
 597         bool "HPT 343/363 DMA support"
 598         depends on PATA_HPT3X3
 599         help
 600           This option enables DMA support for the HPT343/363
 601           controllers. Enable with care as there are still some
 602           problems with DMA on this chipset.
 603
 604 config PATA_ICSIDE
 605         tristate "Acorn ICS PATA support"
 606         depends on ARM && ARCH_ACORN
 607         help
 608           On Acorn systems, say Y here if you wish to use the ICS PATA
 609           interface card.  This is not required for ICS partition support.
 610           If you are unsure, say N to this.
 611
 612 config PATA_IMX
 613         tristate "PATA support for Freescale iMX"
 614         depends on ARCH_MXC
 615         help
 616           This option enables support for the PATA host available on Freescale
 617           iMX SoCs.
 618
 619           If unsure, say N.
 620
 621 config PATA_IT8213
 622         tristate "IT8213 PATA support (Experimental)"
 623         depends on PCI
 624         help
 625           This option enables support for the ITE 821 PATA
 626           controllers via the new ATA layer.
 627
 628           If unsure, say N.
 629
 630 config PATA_IT821X
 631         tristate "IT8211/2 PATA support"
 632         depends on PCI
 633         help
 634           This option enables support for the ITE 8211 and 8212
 635           PATA controllers via the new ATA layer, including RAID
 636           mode.
 637
 638           If unsure, say N.
 639
 640 config PATA_JMICRON
 641         tristate "JMicron PATA support"
 642         depends on PCI
 643         help
 644           Enable support for the JMicron IDE controller, via the new
 645           ATA layer.
 646
 647           If unsure, say N.
 648
 649 config PATA_MACIO
 650         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 651         depends on PPC_PMAC
 652         help
 653           Most IDE capable PowerMacs have IDE busses driven by a variant
 654           of this controller which is part of the Apple chipset used on
 655           most PowerMac models. Some models have multiple busses using
 656           different chipsets, though generally, MacIO is one of them.
 657
 658 config PATA_MARVELL
 659         tristate "Marvell PATA support via legacy mode"
 660         depends on PCI
 661         help
 662           This option enables limited support for the Marvell 88SE61xx ATA
 663           controllers. If you wish to use only the SATA ports then select
 664           the AHCI driver alone. If you wish to the use the PATA port or
 665           both SATA and PATA include this driver.
 666
 667           If unsure, say N.
 668
 669 config PATA_MPC52xx
 670         tristate "Freescale MPC52xx SoC internal IDE"
 671         depends on PPC_MPC52xx && PPC_BESTCOMM
 672         select PPC_BESTCOMM_ATA
 673         help
 674           This option enables support for integrated IDE controller
 675           of the Freescale MPC52xx SoC.
 676
 677           If unsure, say N.
 678
 679 config PATA_NETCELL
 680         tristate "NETCELL Revolution RAID support"
 681         depends on PCI
 682         help
 683           This option enables support for the Netcell Revolution RAID
 684           PATA controller.
 685
 686           If unsure, say N.
 687
 688 config PATA_NINJA32
 689         tristate "Ninja32/Delkin Cardbus ATA support"
 690         depends on PCI
 691         help
 692           This option enables support for the Ninja32, Delkin and
 693           possibly other brands of Cardbus ATA adapter
 694
 695           If unsure, say N.
 696
 697 config PATA_NS87415
 698         tristate "Nat Semi NS87415 PATA support"
 699         depends on PCI
 700         help
 701           This option enables support for the National Semiconductor
 702           NS87415 PCI-IDE controller.
 703
 704           If unsure, say N.
 705
 706 config PATA_OLDPIIX
 707         tristate "Intel PATA old PIIX support"
 708         depends on PCI
 709         help
 710           This option enables support for early PIIX PATA support.
 711
 712           If unsure, say N.
 713
 714 config PATA_OPTIDMA
 715         tristate "OPTI FireStar PATA support (Very Experimental)"
 716         depends on PCI
 717         help
 718           This option enables DMA/PIO support for the later OPTi
 719           controllers found on some old motherboards and in some
 720           laptops.
 721
 722           If unsure, say N.
 723
 724 config PATA_PDC2027X
 725         tristate "Promise PATA 2027x support"
 726         depends on PCI
 727         help
 728           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 729
 730           If unsure, say N.
 731
 732 config PATA_PDC_OLD
 733         tristate "Older Promise PATA controller support"
 734         depends on PCI
 735         help
 736           This option enables support for the Promise 20246, 20262, 20263,
 737           20265 and 20267 adapters.
 738
 739           If unsure, say N.
 740
 741 config PATA_RADISYS
 742         tristate "RADISYS 82600 PATA support (Experimental)"
 743         depends on PCI
 744         help
 745           This option enables support for the RADISYS 82600
 746           PATA controllers via the new ATA layer
 747
 748           If unsure, say N.
 749
 750 config PATA_RDC
 751         tristate "RDC PATA support"
 752         depends on PCI
 753         help
 754           This option enables basic support for the later RDC PATA controllers
 755           controllers via the new ATA layer. For the RDC 1010, you need to
 756           enable the IT821X driver instead.
 757
 758           If unsure, say N.
 759
 760 config PATA_SC1200
 761         tristate "SC1200 PATA support"
 762         depends on PCI && (X86_32 || COMPILE_TEST)
 763         help
 764           This option enables support for the NatSemi/AMD SC1200 SoC
 765           companion chip used with the Geode processor family.
 766
 767           If unsure, say N.
 768
 769 config PATA_SCH
 770         tristate "Intel SCH PATA support"
 771         depends on PCI
 772         help
 773           This option enables support for Intel SCH PATA on the Intel
 774           SCH (US15W, US15L, UL11L) series host controllers.
 775
 776           If unsure, say N.
 777
 778 config PATA_SERVERWORKS
 779         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 780         depends on PCI
 781         help
 782           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 783           HT1000 PATA controllers, via the new ATA layer.
 784
 785           If unsure, say N.
 786
 787 config PATA_SIL680
 788         tristate "CMD / Silicon Image 680 PATA support"
 789         depends on PCI
 790         help
 791           This option enables support for CMD / Silicon Image 680 PATA.
 792
 793           If unsure, say N.
 794
 795 config PATA_SIS
 796         tristate "SiS PATA support"
 797         depends on PCI
 798         help
 799           This option enables support for SiS PATA controllers
 800
 801           If unsure, say N.
 802
 803 config PATA_TOSHIBA
 804         tristate "Toshiba Piccolo support (Experimental)"
 805         depends on PCI
 806         help
 807           Support for the Toshiba Piccolo controllers. Currently only the
 808           primary channel is supported by this driver.
 809
 810           If unsure, say N.
 811
 812 config PATA_TRIFLEX
 813         tristate "Compaq Triflex PATA support"
 814         depends on PCI
 815         help
 816           Enable support for the Compaq 'Triflex' IDE controller as found
 817           on many Compaq Pentium-Pro systems, via the new ATA layer.
 818
 819           If unsure, say N.
 820
 821 config PATA_VIA
 822         tristate "VIA PATA support"
 823         depends on PCI
 824         help
 825           This option enables support for the VIA PATA interfaces
 826           found on the many VIA chipsets.
 827
 828           If unsure, say N.
 829
 830 config PATA_PXA
 831         tristate "PXA DMA-capable PATA support"
 832         depends on ARCH_PXA
 833         help
 834           This option enables support for harddrive attached to PXA CPU's bus.
 835
 836           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 837                 is not capable of doing MWDMA, use pata_platform instead.
 838
 839           If unsure, say N.
 840
 841 config PATA_WINBOND
 842         tristate "Winbond SL82C105 PATA support"
 843         depends on PCI
 844         help
 845           This option enables support for SL82C105 PATA devices found in the
 846           Netwinder and some other systems
 847
 848           If unsure, say N.
 849
 850 endif # ATA_BMDMA
 851
 852 comment "PIO-only SFF controllers"
 853
 854 config PATA_AT32
 855         tristate "Atmel AVR32 PATA support (Experimental)"
 856         depends on AVR32 && PLATFORM_AT32AP
 857         help
 858           This option enables support for the IDE devices on the
 859           Atmel AT32AP platform.
 860
 861           If unsure, say N.
 862
 863 config PATA_AT91
 864         tristate "PATA support for AT91SAM9260"
 865         depends on ARM && SOC_AT91SAM9
 866         help
 867           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 868
 869           If unsure, say N.
 870
 871 config PATA_CMD640_PCI
 872         tristate "CMD640 PCI PATA support (Experimental)"
 873         depends on PCI
 874         help
 875           This option enables support for the CMD640 PCI IDE
 876           interface chip. Only the primary channel is currently
 877           supported.
 878
 879           If unsure, say N.
 880
 881 config PATA_ISAPNP
 882         tristate "ISA Plug and Play PATA support"
 883         depends on ISAPNP
 884         help
 885           This option enables support for ISA plug & play ATA
 886           controllers such as those found on old soundcards.
 887
 888           If unsure, say N.
 889
 890 config PATA_IXP4XX_CF
 891         tristate "IXP4XX Compact Flash support"
 892         depends on ARCH_IXP4XX
 893         help
 894           This option enables support for a Compact Flash connected on
 895           the ixp4xx expansion bus. This driver had been written for
 896           Loft/Avila boards in mind but can work with others.
 897
 898           If unsure, say N.
 899
 900 config PATA_MPIIX
 901         tristate "Intel PATA MPIIX support"
 902         depends on PCI
 903         help
 904           This option enables support for MPIIX PATA support.
 905
 906           If unsure, say N.
 907
 908 config PATA_NS87410
 909         tristate "Nat Semi NS87410 PATA support"
 910         depends on PCI
 911         help
 912           This option enables support for the National Semiconductor
 913           NS87410 PCI-IDE controller.
 914
 915           If unsure, say N.
 916
 917 config PATA_OPTI
 918         tristate "OPTI621/6215 PATA support (Very Experimental)"
 919         depends on PCI
 920         help
 921           This option enables full PIO support for the early Opti ATA
 922           controllers found on some old motherboards.
 923
 924           If unsure, say N.
 925
 926 config PATA_PALMLD
 927         tristate "Palm LifeDrive PATA support"
 928         depends on MACH_PALMLD
 929         help
 930           This option enables support for Palm LifeDrive's internal ATA
 931           port via the new ATA layer.
 932
 933           If unsure, say N.
 934
 935 config PATA_PCMCIA
 936         tristate "PCMCIA PATA support"
 937         depends on PCMCIA
 938         help
 939           This option enables support for PCMCIA ATA interfaces, including
 940           compact flash card adapters via the new ATA layer.
 941
 942           If unsure, say N.
 943
 944 config PATA_PLATFORM
 945         tristate "Generic platform device PATA support"
 946         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 947         help
 948           This option enables support for generic directly connected ATA
 949           devices commonly found on embedded systems.
 950
 951           If unsure, say N.
 952
 953 config PATA_OF_PLATFORM
 954         tristate "OpenFirmware platform device PATA support"
 955         depends on PATA_PLATFORM && OF
 956         help
 957           This option enables support for generic directly connected ATA
 958           devices commonly found on embedded systems with OpenFirmware
 959           bindings.
 960
 961           If unsure, say N.
 962
 963 config PATA_QDI
 964         tristate "QDI VLB PATA support"
 965         depends on ISA
 966         select PATA_LEGACY
 967         help
 968           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 969
 970 config PATA_RB532
 971         tristate "RouterBoard 532 PATA CompactFlash support"
 972         depends on MIKROTIK_RB532
 973         help
 974           This option enables support for the RouterBoard 532
 975           PATA CompactFlash controller.
 976
 977           If unsure, say N.
 978
 979 config PATA_RZ1000
 980         tristate "PC Tech RZ1000 PATA support"
 981         depends on PCI
 982         help
 983           This option enables basic support for the PC Tech RZ1000/1
 984           PATA controllers via the new ATA layer
 985
 986           If unsure, say N.
 987
 988 config PATA_SAMSUNG_CF
 989         tristate "Samsung SoC PATA support"
 990         depends on SAMSUNG_DEV_IDE
 991         help
 992           This option enables basic support for Samsung's S3C/S5P board
 993           PATA controllers via the new ATA layer
 994
 995           If unsure, say N.
 996
 997 config PATA_WINBOND_VLB
 998         tristate "Winbond W83759A VLB PATA support (Experimental)"
 999         depends on ISA
1000         select PATA_LEGACY
1001         help
1002           Support for the Winbond W83759A controller on Vesa Local Bus
1003           systems.
1004
1005 comment "Generic fallback / legacy drivers"
1006
1007 config PATA_ACPI
1008         tristate "ACPI firmware driver for PATA"
1009         depends on ATA_ACPI && ATA_BMDMA
1010         help
1011           This option enables an ACPI method driver which drives
1012           motherboard PATA controller interfaces through the ACPI
1013           firmware in the BIOS. This driver can sometimes handle
1014           otherwise unsupported hardware.
1015
1016 config ATA_GENERIC
1017         tristate "Generic ATA support"
1018         depends on PCI && ATA_BMDMA
1019         help
1020           This option enables support for generic BIOS configured
1021           ATA controllers via the new ATA layer
1022
1023           If unsure, say N.
1024
1025 config PATA_LEGACY
1026         tristate "Legacy ISA PATA support (Experimental)"
1027         depends on (ISA || PCI)
1028         help
1029           This option enables support for ISA/VLB/PCI bus legacy PATA
1030           ports and allows them to be accessed via the new ATA layer.
1031
1032           If unsure, say N.
1033
1034 endif # ATA_SFF
1035 endif # ATA