drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_BRCMSTB
 102         tristate "Broadcom STB AHCI SATA support"
 103         depends on ARCH_BRCMSTB
 104         help
 105           This option enables support for the AHCI SATA3 controller found on
 106           STB SoC's.
 107
 108           If unsure, say N.
 109
 110 config AHCI_DA850
 111         tristate "DaVinci DA850 AHCI SATA support"
 112         depends on ARCH_DAVINCI_DA850
 113         help
 114           This option enables support for the DaVinci DA850 SoC's
 115           onboard AHCI SATA.
 116
 117           If unsure, say N.
 118
 119 config AHCI_ST
 120         tristate "ST AHCI SATA support"
 121         depends on ARCH_STI
 122         help
 123           This option enables support for ST AHCI SATA controller.
 124
 125           If unsure, say N.
 126
 127 config AHCI_IMX
 128         tristate "Freescale i.MX AHCI SATA support"
 129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 130         help
 131           This option enables support for the Freescale i.MX SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_CEVA
 137         tristate "CEVA AHCI SATA support"
 138         depends on OF
 139         help
 140           This option enables support for the CEVA AHCI SATA.
 141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 142
 143           If unsure, say N.
 144
 145 config AHCI_MVEBU
 146         tristate "Marvell EBU AHCI SATA support"
 147         depends on ARCH_MVEBU
 148         help
 149           This option enables support for the Marvebu EBU SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_SUNXI
 155         tristate "Allwinner sunxi AHCI SATA support"
 156         depends on ARCH_SUNXI
 157         help
 158           This option enables support for the Allwinner sunxi SoC's
 159           onboard AHCI SATA.
 160
 161           If unsure, say N.
 162
 163 config AHCI_TEGRA
 164         tristate "NVIDIA Tegra124 AHCI SATA support"
 165         depends on ARCH_TEGRA
 166         help
 167           This option enables support for the NVIDIA Tegra124 SoC's
 168           onboard AHCI SATA.
 169
 170           If unsure, say N.
 171
 172 config AHCI_XGENE
 173         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 174         depends on PHY_XGENE
 175         help
 176          This option enables support for APM X-Gene SoC SATA host controller.
 177
 178 config AHCI_QORIQ
 179         tristate "Freescale QorIQ AHCI SATA support"
 180         depends on OF
 181         help
 182           This option enables support for the Freescale QorIQ AHCI SoC's
 183           onboard AHCI SATA.
 184
 185           If unsure, say N.
 186
 187 config SATA_FSL
 188         tristate "Freescale 3.0Gbps SATA support"
 189         depends on FSL_SOC
 190         help
 191           This option enables support for Freescale 3.0Gbps SATA controller.
 192           It can be found on MPC837x and MPC8315.
 193
 194           If unsure, say N.
 195
 196 config SATA_INIC162X
 197         tristate "Initio 162x SATA support (Very Experimental)"
 198         depends on PCI
 199         help
 200           This option enables support for Initio 162x Serial ATA.
 201
 202 config SATA_ACARD_AHCI
 203         tristate "ACard AHCI variant (ATP 8620)"
 204         depends on PCI
 205         help
 206           This option enables support for Acard.
 207
 208           If unsure, say N.
 209
 210 config SATA_SIL24
 211         tristate "Silicon Image 3124/3132 SATA support"
 212         depends on PCI
 213         help
 214           This option enables support for Silicon Image 3124/3132 Serial ATA.
 215
 216           If unsure, say N.
 217
 218 config ATA_SFF
 219         bool "ATA SFF support (for legacy IDE and PATA)"
 220         default y
 221         help
 222           This option adds support for ATA controllers with SFF
 223           compliant or similar programming interface.
 224
 225           SFF is the legacy IDE interface that has been around since
 226           the dawn of time.  Almost all PATA controllers have an
 227           SFF interface.  Many SATA controllers have an SFF interface
 228           when configured into a legacy compatibility mode.
 229
 230           For users with exclusively modern controllers like AHCI,
 231           Silicon Image 3124, or Marvell 6440, you may choose to
 232           disable this unneeded SFF support.
 233
 234           If unsure, say Y.
 235
 236 if ATA_SFF
 237
 238 comment "SFF controllers with custom DMA interface"
 239
 240 config PDC_ADMA
 241         tristate "Pacific Digital ADMA support"
 242         depends on PCI
 243         help
 244           This option enables support for Pacific Digital ADMA controllers
 245
 246           If unsure, say N.
 247
 248 config PATA_OCTEON_CF
 249         tristate "OCTEON Boot Bus Compact Flash support"
 250         depends on CAVIUM_OCTEON_SOC
 251         help
 252           This option enables a polled compact flash driver for use with
 253           compact flash cards attached to the OCTEON boot bus.
 254
 255           If unsure, say N.
 256
 257 config SATA_QSTOR
 258         tristate "Pacific Digital SATA QStor support"
 259         depends on PCI
 260         help
 261           This option enables support for Pacific Digital Serial ATA QStor.
 262
 263           If unsure, say N.
 264
 265 config SATA_SX4
 266         tristate "Promise SATA SX4 support (Experimental)"
 267         depends on PCI
 268         help
 269           This option enables support for Promise Serial ATA SX4.
 270
 271           If unsure, say N.
 272
 273 config ATA_BMDMA
 274         bool "ATA BMDMA support"
 275         default y
 276         help
 277           This option adds support for SFF ATA controllers with BMDMA
 278           capability.  BMDMA stands for bus-master DMA and is the
 279           de facto DMA interface for SFF controllers.
 280
 281           If unsure, say Y.
 282
 283 if ATA_BMDMA
 284
 285 comment "SATA SFF controllers with BMDMA"
 286
 287 config ATA_PIIX
 288         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 289         depends on PCI
 290         help
 291           This option enables support for ICH5/6/7/8 Serial ATA
 292           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 293           host controllers.
 294
 295           If unsure, say N.
 296
 297 config SATA_DWC
 298         tristate "DesignWare Cores SATA support"
 299         depends on 460EX
 300         select DW_DMAC
 301         help
 302           This option enables support for the on-chip SATA controller of the
 303           AppliedMicro processor 460EX.
 304
 305           If unsure, say N.
 306
 307 config SATA_DWC_DEBUG
 308         bool "Debugging driver version"
 309         depends on SATA_DWC
 310         help
 311           This option enables debugging output in the driver.
 312
 313 config SATA_DWC_VDEBUG
 314         bool "Verbose debug output"
 315         depends on SATA_DWC_DEBUG
 316         help
 317           This option enables the taskfile dumping and NCQ debugging.
 318
 319 config SATA_HIGHBANK
 320         tristate "Calxeda Highbank SATA support"
 321         depends on ARCH_HIGHBANK || COMPILE_TEST
 322         help
 323           This option enables support for the Calxeda Highbank SoC's
 324           onboard SATA.
 325
 326           If unsure, say N.
 327
 328 config SATA_MV
 329         tristate "Marvell SATA support"
 330         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 331                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 332         select GENERIC_PHY
 333         help
 334           This option enables support for the Marvell Serial ATA family.
 335           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 336           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 337
 338           If unsure, say N.
 339
 340 config SATA_NV
 341         tristate "NVIDIA SATA support"
 342         depends on PCI
 343         help
 344           This option enables support for NVIDIA Serial ATA.
 345
 346           If unsure, say N.
 347
 348 config SATA_PROMISE
 349         tristate "Promise SATA TX2/TX4 support"
 350         depends on PCI
 351         help
 352           This option enables support for Promise Serial ATA TX2/TX4.
 353
 354           If unsure, say N.
 355
 356 config SATA_RCAR
 357         tristate "Renesas R-Car SATA support"
 358         depends on ARCH_SHMOBILE || COMPILE_TEST
 359         help
 360           This option enables support for Renesas R-Car Serial ATA.
 361
 362           If unsure, say N.
 363
 364 config SATA_SIL
 365         tristate "Silicon Image SATA support"
 366         depends on PCI
 367         help
 368           This option enables support for Silicon Image Serial ATA.
 369
 370           If unsure, say N.
 371
 372 config SATA_SIS
 373         tristate "SiS 964/965/966/180 SATA support"
 374         depends on PCI
 375         select PATA_SIS
 376         help
 377           This option enables support for SiS Serial ATA on
 378           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 379           The PATA support for SiS 180 requires additionally to
 380           enable the PATA_SIS driver in the config.
 381           If unsure, say N.
 382
 383 config SATA_SVW
 384         tristate "ServerWorks Frodo / Apple K2 SATA support"
 385         depends on PCI
 386         help
 387           This option enables support for Broadcom/Serverworks/Apple K2
 388           SATA support.
 389
 390           If unsure, say N.
 391
 392 config SATA_ULI
 393         tristate "ULi Electronics SATA support"
 394         depends on PCI
 395         help
 396           This option enables support for ULi Electronics SATA.
 397
 398           If unsure, say N.
 399
 400 config SATA_VIA
 401         tristate "VIA SATA support"
 402         depends on PCI
 403         help
 404           This option enables support for VIA Serial ATA.
 405
 406           If unsure, say N.
 407
 408 config SATA_VITESSE
 409         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 410         depends on PCI
 411         help
 412           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 413
 414           If unsure, say N.
 415
 416 comment "PATA SFF controllers with BMDMA"
 417
 418 config PATA_ALI
 419         tristate "ALi PATA support"
 420         depends on PCI
 421         help
 422           This option enables support for the ALi ATA interfaces
 423           found on the many ALi chipsets.
 424
 425           If unsure, say N.
 426
 427 config PATA_AMD
 428         tristate "AMD/NVidia PATA support"
 429         depends on PCI
 430         help
 431           This option enables support for the AMD and NVidia PATA
 432           interfaces found on the chipsets for Athlon/Athlon64.
 433
 434           If unsure, say N.
 435
 436 config PATA_ARASAN_CF
 437         tristate "ARASAN CompactFlash PATA Controller Support"
 438         depends on ARCH_SPEAR13XX || COMPILE_TEST
 439         depends on DMADEVICES
 440         select DMA_ENGINE
 441         help
 442           Say Y here to support the ARASAN CompactFlash PATA controller
 443
 444 config PATA_ARTOP
 445         tristate "ARTOP 6210/6260 PATA support"
 446         depends on PCI
 447         help
 448           This option enables support for ARTOP PATA controllers.
 449
 450           If unsure, say N.
 451
 452 config PATA_ATIIXP
 453         tristate "ATI PATA support"
 454         depends on PCI
 455         help
 456           This option enables support for the ATI ATA interfaces
 457           found on the many ATI chipsets.
 458
 459           If unsure, say N.
 460
 461 config PATA_ATP867X
 462         tristate "ARTOP/Acard ATP867X PATA support"
 463         depends on PCI
 464         help
 465           This option enables support for ARTOP/Acard ATP867X PATA
 466           controllers.
 467
 468           If unsure, say N.
 469
 470 config PATA_BF54X
 471         tristate "Blackfin 54x ATAPI support"
 472         depends on BF542 || BF548 || BF549
 473         help
 474           This option enables support for the built-in ATAPI controller on
 475           Blackfin 54x family chips.
 476
 477           If unsure, say N.
 478
 479 config PATA_CMD64X
 480         tristate "CMD64x PATA support"
 481         depends on PCI
 482         help
 483           This option enables support for the CMD64x series chips
 484           except for the CMD640.
 485
 486           If unsure, say N.
 487
 488 config PATA_CS5520
 489         tristate "CS5510/5520 PATA support"
 490         depends on PCI && (X86_32 || COMPILE_TEST)
 491         help
 492           This option enables support for the Cyrix 5510/5520
 493           companion chip used with the MediaGX/Geode processor family.
 494
 495           If unsure, say N.
 496
 497 config PATA_CS5530
 498         tristate "CS5530 PATA support"
 499         depends on PCI && (X86_32 || COMPILE_TEST)
 500         help
 501           This option enables support for the Cyrix/NatSemi/AMD CS5530
 502           companion chip used with the MediaGX/Geode processor family.
 503
 504           If unsure, say N.
 505
 506 config PATA_CS5535
 507         tristate "CS5535 PATA support (Experimental)"
 508         depends on PCI && X86_32
 509         help
 510           This option enables support for the NatSemi/AMD CS5535
 511           companion chip used with the Geode processor family.
 512
 513           If unsure, say N.
 514
 515 config PATA_CS5536
 516         tristate "CS5536 PATA support"
 517         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 518         help
 519           This option enables support for the AMD CS5536
 520           companion chip used with the Geode LX processor family.
 521
 522           If unsure, say N.
 523
 524 config PATA_CYPRESS
 525         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 526         depends on PCI
 527         help
 528           This option enables support for the Cypress/Contaq CY82C693
 529           chipset found in some Alpha systems
 530
 531           If unsure, say N.
 532
 533 config PATA_EFAR
 534         tristate "EFAR SLC90E66 support"
 535         depends on PCI
 536         help
 537           This option enables support for the EFAR SLC90E66
 538           IDE controller found on some older machines.
 539
 540           If unsure, say N.
 541
 542 config PATA_EP93XX
 543         tristate "Cirrus Logic EP93xx PATA support"
 544         depends on ARCH_EP93XX
 545         help
 546           This option enables support for the PATA controller in
 547           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 548
 549           If unsure, say N.
 550
 551 config PATA_HPT366
 552         tristate "HPT 366/368 PATA support"
 553         depends on PCI
 554         help
 555           This option enables support for the HPT 366 and 368
 556           PATA controllers via the new ATA layer.
 557
 558           If unsure, say N.
 559
 560 config PATA_HPT37X
 561         tristate "HPT 370/370A/371/372/374/302 PATA support"
 562         depends on PCI
 563         help
 564           This option enables support for the majority of the later HPT
 565           PATA controllers via the new ATA layer.
 566
 567           If unsure, say N.
 568
 569 config PATA_HPT3X2N
 570         tristate "HPT 371N/372N/302N PATA support"
 571         depends on PCI
 572         help
 573           This option enables support for the N variant HPT PATA
 574           controllers via the new ATA layer.
 575
 576           If unsure, say N.
 577
 578 config PATA_HPT3X3
 579         tristate "HPT 343/363 PATA support"
 580         depends on PCI
 581         help
 582           This option enables support for the HPT 343/363
 583           PATA controllers via the new ATA layer
 584
 585           If unsure, say N.
 586
 587 config PATA_HPT3X3_DMA
 588         bool "HPT 343/363 DMA support"
 589         depends on PATA_HPT3X3
 590         help
 591           This option enables DMA support for the HPT343/363
 592           controllers. Enable with care as there are still some
 593           problems with DMA on this chipset.
 594
 595 config PATA_ICSIDE
 596         tristate "Acorn ICS PATA support"
 597         depends on ARM && ARCH_ACORN
 598         help
 599           On Acorn systems, say Y here if you wish to use the ICS PATA
 600           interface card.  This is not required for ICS partition support.
 601           If you are unsure, say N to this.
 602
 603 config PATA_IMX
 604         tristate "PATA support for Freescale iMX"
 605         depends on ARCH_MXC
 606         help
 607           This option enables support for the PATA host available on Freescale
 608           iMX SoCs.
 609
 610           If unsure, say N.
 611
 612 config PATA_IT8213
 613         tristate "IT8213 PATA support (Experimental)"
 614         depends on PCI
 615         help
 616           This option enables support for the ITE 821 PATA
 617           controllers via the new ATA layer.
 618
 619           If unsure, say N.
 620
 621 config PATA_IT821X
 622         tristate "IT8211/2 PATA support"
 623         depends on PCI
 624         help
 625           This option enables support for the ITE 8211 and 8212
 626           PATA controllers via the new ATA layer, including RAID
 627           mode.
 628
 629           If unsure, say N.
 630
 631 config PATA_JMICRON
 632         tristate "JMicron PATA support"
 633         depends on PCI
 634         help
 635           Enable support for the JMicron IDE controller, via the new
 636           ATA layer.
 637
 638           If unsure, say N.
 639
 640 config PATA_MACIO
 641         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 642         depends on PPC_PMAC
 643         help
 644           Most IDE capable PowerMacs have IDE busses driven by a variant
 645           of this controller which is part of the Apple chipset used on
 646           most PowerMac models. Some models have multiple busses using
 647           different chipsets, though generally, MacIO is one of them.
 648
 649 config PATA_MARVELL
 650         tristate "Marvell PATA support via legacy mode"
 651         depends on PCI
 652         help
 653           This option enables limited support for the Marvell 88SE61xx ATA
 654           controllers. If you wish to use only the SATA ports then select
 655           the AHCI driver alone. If you wish to the use the PATA port or
 656           both SATA and PATA include this driver.
 657
 658           If unsure, say N.
 659
 660 config PATA_MPC52xx
 661         tristate "Freescale MPC52xx SoC internal IDE"
 662         depends on PPC_MPC52xx && PPC_BESTCOMM
 663         select PPC_BESTCOMM_ATA
 664         help
 665           This option enables support for integrated IDE controller
 666           of the Freescale MPC52xx SoC.
 667
 668           If unsure, say N.
 669
 670 config PATA_NETCELL
 671         tristate "NETCELL Revolution RAID support"
 672         depends on PCI
 673         help
 674           This option enables support for the Netcell Revolution RAID
 675           PATA controller.
 676
 677           If unsure, say N.
 678
 679 config PATA_NINJA32
 680         tristate "Ninja32/Delkin Cardbus ATA support"
 681         depends on PCI
 682         help
 683           This option enables support for the Ninja32, Delkin and
 684           possibly other brands of Cardbus ATA adapter
 685
 686           If unsure, say N.
 687
 688 config PATA_NS87415
 689         tristate "Nat Semi NS87415 PATA support"
 690         depends on PCI
 691         help
 692           This option enables support for the National Semiconductor
 693           NS87415 PCI-IDE controller.
 694
 695           If unsure, say N.
 696
 697 config PATA_OLDPIIX
 698         tristate "Intel PATA old PIIX support"
 699         depends on PCI
 700         help
 701           This option enables support for early PIIX PATA support.
 702
 703           If unsure, say N.
 704
 705 config PATA_OPTIDMA
 706         tristate "OPTI FireStar PATA support (Very Experimental)"
 707         depends on PCI
 708         help
 709           This option enables DMA/PIO support for the later OPTi
 710           controllers found on some old motherboards and in some
 711           laptops.
 712
 713           If unsure, say N.
 714
 715 config PATA_PDC2027X
 716         tristate "Promise PATA 2027x support"
 717         depends on PCI
 718         help
 719           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 720
 721           If unsure, say N.
 722
 723 config PATA_PDC_OLD
 724         tristate "Older Promise PATA controller support"
 725         depends on PCI
 726         help
 727           This option enables support for the Promise 20246, 20262, 20263,
 728           20265 and 20267 adapters.
 729
 730           If unsure, say N.
 731
 732 config PATA_RADISYS
 733         tristate "RADISYS 82600 PATA support (Experimental)"
 734         depends on PCI
 735         help
 736           This option enables support for the RADISYS 82600
 737           PATA controllers via the new ATA layer
 738
 739           If unsure, say N.
 740
 741 config PATA_RDC
 742         tristate "RDC PATA support"
 743         depends on PCI
 744         help
 745           This option enables basic support for the later RDC PATA controllers
 746           controllers via the new ATA layer. For the RDC 1010, you need to
 747           enable the IT821X driver instead.
 748
 749           If unsure, say N.
 750
 751 config PATA_SC1200
 752         tristate "SC1200 PATA support"
 753         depends on PCI && (X86_32 || COMPILE_TEST)
 754         help
 755           This option enables support for the NatSemi/AMD SC1200 SoC
 756           companion chip used with the Geode processor family.
 757
 758           If unsure, say N.
 759
 760 config PATA_SCH
 761         tristate "Intel SCH PATA support"
 762         depends on PCI
 763         help
 764           This option enables support for Intel SCH PATA on the Intel
 765           SCH (US15W, US15L, UL11L) series host controllers.
 766
 767           If unsure, say N.
 768
 769 config PATA_SERVERWORKS
 770         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 771         depends on PCI
 772         help
 773           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 774           HT1000 PATA controllers, via the new ATA layer.
 775
 776           If unsure, say N.
 777
 778 config PATA_SIL680
 779         tristate "CMD / Silicon Image 680 PATA support"
 780         depends on PCI
 781         help
 782           This option enables support for CMD / Silicon Image 680 PATA.
 783
 784           If unsure, say N.
 785
 786 config PATA_SIS
 787         tristate "SiS PATA support"
 788         depends on PCI
 789         help
 790           This option enables support for SiS PATA controllers
 791
 792           If unsure, say N.
 793
 794 config PATA_TOSHIBA
 795         tristate "Toshiba Piccolo support (Experimental)"
 796         depends on PCI
 797         help
 798           Support for the Toshiba Piccolo controllers. Currently only the
 799           primary channel is supported by this driver.
 800
 801           If unsure, say N.
 802
 803 config PATA_TRIFLEX
 804         tristate "Compaq Triflex PATA support"
 805         depends on PCI
 806         help
 807           Enable support for the Compaq 'Triflex' IDE controller as found
 808           on many Compaq Pentium-Pro systems, via the new ATA layer.
 809
 810           If unsure, say N.
 811
 812 config PATA_VIA
 813         tristate "VIA PATA support"
 814         depends on PCI
 815         help
 816           This option enables support for the VIA PATA interfaces
 817           found on the many VIA chipsets.
 818
 819           If unsure, say N.
 820
 821 config PATA_PXA
 822         tristate "PXA DMA-capable PATA support"
 823         depends on ARCH_PXA
 824         help
 825           This option enables support for harddrive attached to PXA CPU's bus.
 826
 827           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 828                 is not capable of doing MWDMA, use pata_platform instead.
 829
 830           If unsure, say N.
 831
 832 config PATA_WINBOND
 833         tristate "Winbond SL82C105 PATA support"
 834         depends on PCI
 835         help
 836           This option enables support for SL82C105 PATA devices found in the
 837           Netwinder and some other systems
 838
 839           If unsure, say N.
 840
 841 endif # ATA_BMDMA
 842
 843 comment "PIO-only SFF controllers"
 844
 845 config PATA_AT32
 846         tristate "Atmel AVR32 PATA support (Experimental)"
 847         depends on AVR32 && PLATFORM_AT32AP
 848         help
 849           This option enables support for the IDE devices on the
 850           Atmel AT32AP platform.
 851
 852           If unsure, say N.
 853
 854 config PATA_AT91
 855         tristate "PATA support for AT91SAM9260"
 856         depends on ARM && SOC_AT91SAM9
 857         help
 858           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 859
 860           If unsure, say N.
 861
 862 config PATA_CMD640_PCI
 863         tristate "CMD640 PCI PATA support (Experimental)"
 864         depends on PCI
 865         help
 866           This option enables support for the CMD640 PCI IDE
 867           interface chip. Only the primary channel is currently
 868           supported.
 869
 870           If unsure, say N.
 871
 872 config PATA_ISAPNP
 873         tristate "ISA Plug and Play PATA support"
 874         depends on ISAPNP
 875         help
 876           This option enables support for ISA plug & play ATA
 877           controllers such as those found on old soundcards.
 878
 879           If unsure, say N.
 880
 881 config PATA_IXP4XX_CF
 882         tristate "IXP4XX Compact Flash support"
 883         depends on ARCH_IXP4XX
 884         help
 885           This option enables support for a Compact Flash connected on
 886           the ixp4xx expansion bus. This driver had been written for
 887           Loft/Avila boards in mind but can work with others.
 888
 889           If unsure, say N.
 890
 891 config PATA_MPIIX
 892         tristate "Intel PATA MPIIX support"
 893         depends on PCI
 894         help
 895           This option enables support for MPIIX PATA support.
 896
 897           If unsure, say N.
 898
 899 config PATA_NS87410
 900         tristate "Nat Semi NS87410 PATA support"
 901         depends on PCI
 902         help
 903           This option enables support for the National Semiconductor
 904           NS87410 PCI-IDE controller.
 905
 906           If unsure, say N.
 907
 908 config PATA_OPTI
 909         tristate "OPTI621/6215 PATA support (Very Experimental)"
 910         depends on PCI
 911         help
 912           This option enables full PIO support for the early Opti ATA
 913           controllers found on some old motherboards.
 914
 915           If unsure, say N.
 916
 917 config PATA_PALMLD
 918         tristate "Palm LifeDrive PATA support"
 919         depends on MACH_PALMLD
 920         help
 921           This option enables support for Palm LifeDrive's internal ATA
 922           port via the new ATA layer.
 923
 924           If unsure, say N.
 925
 926 config PATA_PCMCIA
 927         tristate "PCMCIA PATA support"
 928         depends on PCMCIA
 929         help
 930           This option enables support for PCMCIA ATA interfaces, including
 931           compact flash card adapters via the new ATA layer.
 932
 933           If unsure, say N.
 934
 935 config PATA_PLATFORM
 936         tristate "Generic platform device PATA support"
 937         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 938         help
 939           This option enables support for generic directly connected ATA
 940           devices commonly found on embedded systems.
 941
 942           If unsure, say N.
 943
 944 config PATA_OF_PLATFORM
 945         tristate "OpenFirmware platform device PATA support"
 946         depends on PATA_PLATFORM && OF
 947         help
 948           This option enables support for generic directly connected ATA
 949           devices commonly found on embedded systems with OpenFirmware
 950           bindings.
 951
 952           If unsure, say N.
 953
 954 config PATA_QDI
 955         tristate "QDI VLB PATA support"
 956         depends on ISA
 957         select PATA_LEGACY
 958         help
 959           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 960
 961 config PATA_RB532
 962         tristate "RouterBoard 532 PATA CompactFlash support"
 963         depends on MIKROTIK_RB532
 964         help
 965           This option enables support for the RouterBoard 532
 966           PATA CompactFlash controller.
 967
 968           If unsure, say N.
 969
 970 config PATA_RZ1000
 971         tristate "PC Tech RZ1000 PATA support"
 972         depends on PCI
 973         help
 974           This option enables basic support for the PC Tech RZ1000/1
 975           PATA controllers via the new ATA layer
 976
 977           If unsure, say N.
 978
 979 config PATA_SAMSUNG_CF
 980         tristate "Samsung SoC PATA support"
 981         depends on SAMSUNG_DEV_IDE
 982         help
 983           This option enables basic support for Samsung's S3C/S5P board
 984           PATA controllers via the new ATA layer
 985
 986           If unsure, say N.
 987
 988 config PATA_WINBOND_VLB
 989         tristate "Winbond W83759A VLB PATA support (Experimental)"
 990         depends on ISA
 991         select PATA_LEGACY
 992         help
 993           Support for the Winbond W83759A controller on Vesa Local Bus
 994           systems.
 995
 996 comment "Generic fallback / legacy drivers"
 997
 998 config PATA_ACPI
 999         tristate "ACPI firmware driver for PATA"
1000         depends on ATA_ACPI && ATA_BMDMA
1001         help
1002           This option enables an ACPI method driver which drives
1003           motherboard PATA controller interfaces through the ACPI
1004           firmware in the BIOS. This driver can sometimes handle
1005           otherwise unsupported hardware.
1006
1007 config ATA_GENERIC
1008         tristate "Generic ATA support"
1009         depends on PCI && ATA_BMDMA
1010         help
1011           This option enables support for generic BIOS configured
1012           ATA controllers via the new ATA layer
1013
1014           If unsure, say N.
1015
1016 config PATA_LEGACY
1017         tristate "Legacy ISA PATA support (Experimental)"
1018         depends on (ISA || PCI)
1019         help
1020           This option enables support for ISA/VLB/PCI bus legacy PATA
1021           ports and allows them to be accessed via the new ATA layer.
1022
1023           If unsure, say N.
1024
1025 endif # ATA_SFF
1026 endif # ATA