drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI && PM_RUNTIME
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_DA850
 101         tristate "DaVinci DA850 AHCI SATA support"
 102         depends on ARCH_DAVINCI_DA850
 103         help
 104           This option enables support for the DaVinci DA850 SoC's
 105           onboard AHCI SATA.
 106
 107           If unsure, say N.
 108
 109 config AHCI_ST
 110         tristate "ST AHCI SATA support"
 111         depends on ARCH_STI
 112         help
 113           This option enables support for ST AHCI SATA controller.
 114
 115           If unsure, say N.
 116
 117 config AHCI_IMX
 118         tristate "Freescale i.MX AHCI SATA support"
 119         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 120         help
 121           This option enables support for the Freescale i.MX SoC's
 122           onboard AHCI SATA.
 123
 124           If unsure, say N.
 125
 126 config AHCI_MVEBU
 127         tristate "Marvell EBU AHCI SATA support"
 128         depends on ARCH_MVEBU
 129         help
 130           This option enables support for the Marvebu EBU SoC's
 131           onboard AHCI SATA.
 132
 133           If unsure, say N.
 134
 135 config AHCI_SUNXI
 136         tristate "Allwinner sunxi AHCI SATA support"
 137         depends on ARCH_SUNXI
 138         help
 139           This option enables support for the Allwinner sunxi SoC's
 140           onboard AHCI SATA.
 141
 142           If unsure, say N.
 143
 144 config AHCI_XGENE
 145         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 146         depends on PHY_XGENE
 147         help
 148          This option enables support for APM X-Gene SoC SATA host controller.
 149
 150 config SATA_FSL
 151         tristate "Freescale 3.0Gbps SATA support"
 152         depends on FSL_SOC
 153         help
 154           This option enables support for Freescale 3.0Gbps SATA controller.
 155           It can be found on MPC837x and MPC8315.
 156
 157           If unsure, say N.
 158
 159 config SATA_INIC162X
 160         tristate "Initio 162x SATA support (Very Experimental)"
 161         depends on PCI
 162         help
 163           This option enables support for Initio 162x Serial ATA.
 164
 165 config SATA_ACARD_AHCI
 166         tristate "ACard AHCI variant (ATP 8620)"
 167         depends on PCI
 168         help
 169           This option enables support for Acard.
 170
 171           If unsure, say N.
 172
 173 config SATA_SIL24
 174         tristate "Silicon Image 3124/3132 SATA support"
 175         depends on PCI
 176         help
 177           This option enables support for Silicon Image 3124/3132 Serial ATA.
 178
 179           If unsure, say N.
 180
 181 config ATA_SFF
 182         bool "ATA SFF support (for legacy IDE and PATA)"
 183         default y
 184         help
 185           This option adds support for ATA controllers with SFF
 186           compliant or similar programming interface.
 187
 188           SFF is the legacy IDE interface that has been around since
 189           the dawn of time.  Almost all PATA controllers have an
 190           SFF interface.  Many SATA controllers have an SFF interface
 191           when configured into a legacy compatibility mode.
 192
 193           For users with exclusively modern controllers like AHCI,
 194           Silicon Image 3124, or Marvell 6440, you may choose to
 195           disable this unneeded SFF support.
 196
 197           If unsure, say Y.
 198
 199 if ATA_SFF
 200
 201 comment "SFF controllers with custom DMA interface"
 202
 203 config PDC_ADMA
 204         tristate "Pacific Digital ADMA support"
 205         depends on PCI
 206         help
 207           This option enables support for Pacific Digital ADMA controllers
 208
 209           If unsure, say N.
 210
 211 config PATA_OCTEON_CF
 212         tristate "OCTEON Boot Bus Compact Flash support"
 213         depends on CAVIUM_OCTEON_SOC
 214         help
 215           This option enables a polled compact flash driver for use with
 216           compact flash cards attached to the OCTEON boot bus.
 217
 218           If unsure, say N.
 219
 220 config SATA_QSTOR
 221         tristate "Pacific Digital SATA QStor support"
 222         depends on PCI
 223         help
 224           This option enables support for Pacific Digital Serial ATA QStor.
 225
 226           If unsure, say N.
 227
 228 config SATA_SX4
 229         tristate "Promise SATA SX4 support (Experimental)"
 230         depends on PCI
 231         help
 232           This option enables support for Promise Serial ATA SX4.
 233
 234           If unsure, say N.
 235
 236 config ATA_BMDMA
 237         bool "ATA BMDMA support"
 238         default y
 239         help
 240           This option adds support for SFF ATA controllers with BMDMA
 241           capability.  BMDMA stands for bus-master DMA and is the
 242           de facto DMA interface for SFF controllers.
 243
 244           If unsure, say Y.
 245
 246 if ATA_BMDMA
 247
 248 comment "SATA SFF controllers with BMDMA"
 249
 250 config ATA_PIIX
 251         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 252         depends on PCI
 253         help
 254           This option enables support for ICH5/6/7/8 Serial ATA
 255           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 256           host controllers.
 257
 258           If unsure, say N.
 259
 260 config SATA_DWC
 261         tristate "DesignWare Cores SATA support"
 262         depends on 460EX
 263         help
 264           This option enables support for the on-chip SATA controller of the
 265           AppliedMicro processor 460EX.
 266
 267           If unsure, say N.
 268
 269 config SATA_DWC_DEBUG
 270         bool "Debugging driver version"
 271         depends on SATA_DWC
 272         help
 273           This option enables debugging output in the driver.
 274
 275 config SATA_DWC_VDEBUG
 276         bool "Verbose debug output"
 277         depends on SATA_DWC_DEBUG
 278         help
 279           This option enables the taskfile dumping and NCQ debugging.
 280
 281 config SATA_HIGHBANK
 282         tristate "Calxeda Highbank SATA support"
 283         depends on ARCH_HIGHBANK || COMPILE_TEST
 284         help
 285           This option enables support for the Calxeda Highbank SoC's
 286           onboard SATA.
 287
 288           If unsure, say N.
 289
 290 config SATA_MV
 291         tristate "Marvell SATA support"
 292         depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
 293                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 294         select GENERIC_PHY
 295         help
 296           This option enables support for the Marvell Serial ATA family.
 297           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 298           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 299
 300           If unsure, say N.
 301
 302 config SATA_NV
 303         tristate "NVIDIA SATA support"
 304         depends on PCI
 305         help
 306           This option enables support for NVIDIA Serial ATA.
 307
 308           If unsure, say N.
 309
 310 config SATA_PROMISE
 311         tristate "Promise SATA TX2/TX4 support"
 312         depends on PCI
 313         help
 314           This option enables support for Promise Serial ATA TX2/TX4.
 315
 316           If unsure, say N.
 317
 318 config SATA_RCAR
 319         tristate "Renesas R-Car SATA support"
 320         depends on ARCH_SHMOBILE || COMPILE_TEST
 321         help
 322           This option enables support for Renesas R-Car Serial ATA.
 323
 324           If unsure, say N.
 325
 326 config SATA_SIL
 327         tristate "Silicon Image SATA support"
 328         depends on PCI
 329         help
 330           This option enables support for Silicon Image Serial ATA.
 331
 332           If unsure, say N.
 333
 334 config SATA_SIS
 335         tristate "SiS 964/965/966/180 SATA support"
 336         depends on PCI
 337         select PATA_SIS
 338         help
 339           This option enables support for SiS Serial ATA on
 340           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 341           The PATA support for SiS 180 requires additionally to
 342           enable the PATA_SIS driver in the config.
 343           If unsure, say N.
 344
 345 config SATA_SVW
 346         tristate "ServerWorks Frodo / Apple K2 SATA support"
 347         depends on PCI
 348         help
 349           This option enables support for Broadcom/Serverworks/Apple K2
 350           SATA support.
 351
 352           If unsure, say N.
 353
 354 config SATA_ULI
 355         tristate "ULi Electronics SATA support"
 356         depends on PCI
 357         help
 358           This option enables support for ULi Electronics SATA.
 359
 360           If unsure, say N.
 361
 362 config SATA_VIA
 363         tristate "VIA SATA support"
 364         depends on PCI
 365         help
 366           This option enables support for VIA Serial ATA.
 367
 368           If unsure, say N.
 369
 370 config SATA_VITESSE
 371         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 372         depends on PCI
 373         help
 374           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 375
 376           If unsure, say N.
 377
 378 comment "PATA SFF controllers with BMDMA"
 379
 380 config PATA_ALI
 381         tristate "ALi PATA support"
 382         depends on PCI
 383         help
 384           This option enables support for the ALi ATA interfaces
 385           found on the many ALi chipsets.
 386
 387           If unsure, say N.
 388
 389 config PATA_AMD
 390         tristate "AMD/NVidia PATA support"
 391         depends on PCI
 392         help
 393           This option enables support for the AMD and NVidia PATA
 394           interfaces found on the chipsets for Athlon/Athlon64.
 395
 396           If unsure, say N.
 397
 398 config PATA_ARASAN_CF
 399         tristate "ARASAN CompactFlash PATA Controller Support"
 400         depends on ARCH_SPEAR13XX || COMPILE_TEST
 401         depends on DMADEVICES
 402         select DMA_ENGINE
 403         help
 404           Say Y here to support the ARASAN CompactFlash PATA controller
 405
 406 config PATA_ARTOP
 407         tristate "ARTOP 6210/6260 PATA support"
 408         depends on PCI
 409         help
 410           This option enables support for ARTOP PATA controllers.
 411
 412           If unsure, say N.
 413
 414 config PATA_ATIIXP
 415         tristate "ATI PATA support"
 416         depends on PCI
 417         help
 418           This option enables support for the ATI ATA interfaces
 419           found on the many ATI chipsets.
 420
 421           If unsure, say N.
 422
 423 config PATA_ATP867X
 424         tristate "ARTOP/Acard ATP867X PATA support"
 425         depends on PCI
 426         help
 427           This option enables support for ARTOP/Acard ATP867X PATA
 428           controllers.
 429
 430           If unsure, say N.
 431
 432 config PATA_BF54X
 433         tristate "Blackfin 54x ATAPI support"
 434         depends on BF542 || BF548 || BF549
 435         help
 436           This option enables support for the built-in ATAPI controller on
 437           Blackfin 54x family chips.
 438
 439           If unsure, say N.
 440
 441 config PATA_CMD64X
 442         tristate "CMD64x PATA support"
 443         depends on PCI
 444         help
 445           This option enables support for the CMD64x series chips
 446           except for the CMD640.
 447
 448           If unsure, say N.
 449
 450 config PATA_CS5520
 451         tristate "CS5510/5520 PATA support"
 452         depends on PCI && (X86_32 || COMPILE_TEST)
 453         help
 454           This option enables support for the Cyrix 5510/5520
 455           companion chip used with the MediaGX/Geode processor family.
 456
 457           If unsure, say N.
 458
 459 config PATA_CS5530
 460         tristate "CS5530 PATA support"
 461         depends on PCI && (X86_32 || COMPILE_TEST)
 462         help
 463           This option enables support for the Cyrix/NatSemi/AMD CS5530
 464           companion chip used with the MediaGX/Geode processor family.
 465
 466           If unsure, say N.
 467
 468 config PATA_CS5535
 469         tristate "CS5535 PATA support (Experimental)"
 470         depends on PCI && X86_32
 471         help
 472           This option enables support for the NatSemi/AMD CS5535
 473           companion chip used with the Geode processor family.
 474
 475           If unsure, say N.
 476
 477 config PATA_CS5536
 478         tristate "CS5536 PATA support"
 479         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 480         help
 481           This option enables support for the AMD CS5536
 482           companion chip used with the Geode LX processor family.
 483
 484           If unsure, say N.
 485
 486 config PATA_CYPRESS
 487         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 488         depends on PCI
 489         help
 490           This option enables support for the Cypress/Contaq CY82C693
 491           chipset found in some Alpha systems
 492
 493           If unsure, say N.
 494
 495 config PATA_EFAR
 496         tristate "EFAR SLC90E66 support"
 497         depends on PCI
 498         help
 499           This option enables support for the EFAR SLC90E66
 500           IDE controller found on some older machines.
 501
 502           If unsure, say N.
 503
 504 config PATA_EP93XX
 505         tristate "Cirrus Logic EP93xx PATA support"
 506         depends on ARCH_EP93XX
 507         help
 508           This option enables support for the PATA controller in
 509           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 510
 511           If unsure, say N.
 512
 513 config PATA_HPT366
 514         tristate "HPT 366/368 PATA support"
 515         depends on PCI
 516         help
 517           This option enables support for the HPT 366 and 368
 518           PATA controllers via the new ATA layer.
 519
 520           If unsure, say N.
 521
 522 config PATA_HPT37X
 523         tristate "HPT 370/370A/371/372/374/302 PATA support"
 524         depends on PCI
 525         help
 526           This option enables support for the majority of the later HPT
 527           PATA controllers via the new ATA layer.
 528
 529           If unsure, say N.
 530
 531 config PATA_HPT3X2N
 532         tristate "HPT 371N/372N/302N PATA support"
 533         depends on PCI
 534         help
 535           This option enables support for the N variant HPT PATA
 536           controllers via the new ATA layer.
 537
 538           If unsure, say N.
 539
 540 config PATA_HPT3X3
 541         tristate "HPT 343/363 PATA support"
 542         depends on PCI
 543         help
 544           This option enables support for the HPT 343/363
 545           PATA controllers via the new ATA layer
 546
 547           If unsure, say N.
 548
 549 config PATA_HPT3X3_DMA
 550         bool "HPT 343/363 DMA support"
 551         depends on PATA_HPT3X3
 552         help
 553           This option enables DMA support for the HPT343/363
 554           controllers. Enable with care as there are still some
 555           problems with DMA on this chipset.
 556
 557 config PATA_ICSIDE
 558         tristate "Acorn ICS PATA support"
 559         depends on ARM && ARCH_ACORN
 560         help
 561           On Acorn systems, say Y here if you wish to use the ICS PATA
 562           interface card.  This is not required for ICS partition support.
 563           If you are unsure, say N to this.
 564
 565 config PATA_IMX
 566         tristate "PATA support for Freescale iMX"
 567         depends on ARCH_MXC
 568         help
 569           This option enables support for the PATA host available on Freescale
 570           iMX SoCs.
 571
 572           If unsure, say N.
 573
 574 config PATA_IT8213
 575         tristate "IT8213 PATA support (Experimental)"
 576         depends on PCI
 577         help
 578           This option enables support for the ITE 821 PATA
 579           controllers via the new ATA layer.
 580
 581           If unsure, say N.
 582
 583 config PATA_IT821X
 584         tristate "IT8211/2 PATA support"
 585         depends on PCI
 586         help
 587           This option enables support for the ITE 8211 and 8212
 588           PATA controllers via the new ATA layer, including RAID
 589           mode.
 590
 591           If unsure, say N.
 592
 593 config PATA_JMICRON
 594         tristate "JMicron PATA support"
 595         depends on PCI
 596         help
 597           Enable support for the JMicron IDE controller, via the new
 598           ATA layer.
 599
 600           If unsure, say N.
 601
 602 config PATA_MACIO
 603         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 604         depends on PPC_PMAC
 605         help
 606           Most IDE capable PowerMacs have IDE busses driven by a variant
 607           of this controller which is part of the Apple chipset used on
 608           most PowerMac models. Some models have multiple busses using
 609           different chipsets, though generally, MacIO is one of them.
 610
 611 config PATA_MARVELL
 612         tristate "Marvell PATA support via legacy mode"
 613         depends on PCI
 614         help
 615           This option enables limited support for the Marvell 88SE61xx ATA
 616           controllers. If you wish to use only the SATA ports then select
 617           the AHCI driver alone. If you wish to the use the PATA port or
 618           both SATA and PATA include this driver.
 619
 620           If unsure, say N.
 621
 622 config PATA_MPC52xx
 623         tristate "Freescale MPC52xx SoC internal IDE"
 624         depends on PPC_MPC52xx && PPC_BESTCOMM
 625         select PPC_BESTCOMM_ATA
 626         help
 627           This option enables support for integrated IDE controller
 628           of the Freescale MPC52xx SoC.
 629
 630           If unsure, say N.
 631
 632 config PATA_NETCELL
 633         tristate "NETCELL Revolution RAID support"
 634         depends on PCI
 635         help
 636           This option enables support for the Netcell Revolution RAID
 637           PATA controller.
 638
 639           If unsure, say N.
 640
 641 config PATA_NINJA32
 642         tristate "Ninja32/Delkin Cardbus ATA support"
 643         depends on PCI
 644         help
 645           This option enables support for the Ninja32, Delkin and
 646           possibly other brands of Cardbus ATA adapter
 647
 648           If unsure, say N.
 649
 650 config PATA_NS87415
 651         tristate "Nat Semi NS87415 PATA support"
 652         depends on PCI
 653         help
 654           This option enables support for the National Semiconductor
 655           NS87415 PCI-IDE controller.
 656
 657           If unsure, say N.
 658
 659 config PATA_OLDPIIX
 660         tristate "Intel PATA old PIIX support"
 661         depends on PCI
 662         help
 663           This option enables support for early PIIX PATA support.
 664
 665           If unsure, say N.
 666
 667 config PATA_OPTIDMA
 668         tristate "OPTI FireStar PATA support (Very Experimental)"
 669         depends on PCI
 670         help
 671           This option enables DMA/PIO support for the later OPTi
 672           controllers found on some old motherboards and in some
 673           laptops.
 674
 675           If unsure, say N.
 676
 677 config PATA_PDC2027X
 678         tristate "Promise PATA 2027x support"
 679         depends on PCI
 680         help
 681           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 682
 683           If unsure, say N.
 684
 685 config PATA_PDC_OLD
 686         tristate "Older Promise PATA controller support"
 687         depends on PCI
 688         help
 689           This option enables support for the Promise 20246, 20262, 20263,
 690           20265 and 20267 adapters.
 691
 692           If unsure, say N.
 693
 694 config PATA_RADISYS
 695         tristate "RADISYS 82600 PATA support (Experimental)"
 696         depends on PCI
 697         help
 698           This option enables support for the RADISYS 82600
 699           PATA controllers via the new ATA layer
 700
 701           If unsure, say N.
 702
 703 config PATA_RDC
 704         tristate "RDC PATA support"
 705         depends on PCI
 706         help
 707           This option enables basic support for the later RDC PATA controllers
 708           controllers via the new ATA layer. For the RDC 1010, you need to
 709           enable the IT821X driver instead.
 710
 711           If unsure, say N.
 712
 713 config PATA_SC1200
 714         tristate "SC1200 PATA support"
 715         depends on PCI && (X86_32 || COMPILE_TEST)
 716         help
 717           This option enables support for the NatSemi/AMD SC1200 SoC
 718           companion chip used with the Geode processor family.
 719
 720           If unsure, say N.
 721
 722 config PATA_SCC
 723         tristate "Toshiba's Cell Reference Set IDE support"
 724         depends on PCI && PPC_CELLEB
 725         help
 726           This option enables support for the built-in IDE controller on
 727           Toshiba Cell Reference Board.
 728
 729           If unsure, say N.
 730
 731 config PATA_SCH
 732         tristate "Intel SCH PATA support"
 733         depends on PCI
 734         help
 735           This option enables support for Intel SCH PATA on the Intel
 736           SCH (US15W, US15L, UL11L) series host controllers.
 737
 738           If unsure, say N.
 739
 740 config PATA_SERVERWORKS
 741         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 742         depends on PCI
 743         help
 744           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 745           HT1000 PATA controllers, via the new ATA layer.
 746
 747           If unsure, say N.
 748
 749 config PATA_SIL680
 750         tristate "CMD / Silicon Image 680 PATA support"
 751         depends on PCI
 752         help
 753           This option enables support for CMD / Silicon Image 680 PATA.
 754
 755           If unsure, say N.
 756
 757 config PATA_SIS
 758         tristate "SiS PATA support"
 759         depends on PCI
 760         help
 761           This option enables support for SiS PATA controllers
 762
 763           If unsure, say N.
 764
 765 config PATA_TOSHIBA
 766         tristate "Toshiba Piccolo support (Experimental)"
 767         depends on PCI
 768         help
 769           Support for the Toshiba Piccolo controllers. Currently only the
 770           primary channel is supported by this driver.
 771
 772           If unsure, say N.
 773
 774 config PATA_TRIFLEX
 775         tristate "Compaq Triflex PATA support"
 776         depends on PCI
 777         help
 778           Enable support for the Compaq 'Triflex' IDE controller as found
 779           on many Compaq Pentium-Pro systems, via the new ATA layer.
 780
 781           If unsure, say N.
 782
 783 config PATA_VIA
 784         tristate "VIA PATA support"
 785         depends on PCI
 786         help
 787           This option enables support for the VIA PATA interfaces
 788           found on the many VIA chipsets.
 789
 790           If unsure, say N.
 791
 792 config PATA_PXA
 793         tristate "PXA DMA-capable PATA support"
 794         depends on ARCH_PXA
 795         help
 796           This option enables support for harddrive attached to PXA CPU's bus.
 797
 798           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 799                 is not capable of doing MWDMA, use pata_platform instead.
 800
 801           If unsure, say N.
 802
 803 config PATA_WINBOND
 804         tristate "Winbond SL82C105 PATA support"
 805         depends on PCI
 806         help
 807           This option enables support for SL82C105 PATA devices found in the
 808           Netwinder and some other systems
 809
 810           If unsure, say N.
 811
 812 endif # ATA_BMDMA
 813
 814 comment "PIO-only SFF controllers"
 815
 816 config PATA_AT32
 817         tristate "Atmel AVR32 PATA support (Experimental)"
 818         depends on AVR32 && PLATFORM_AT32AP
 819         help
 820           This option enables support for the IDE devices on the
 821           Atmel AT32AP platform.
 822
 823           If unsure, say N.
 824
 825 config PATA_AT91
 826         tristate "PATA support for AT91SAM9260"
 827         depends on ARM && SOC_AT91SAM9
 828         help
 829           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 830
 831           If unsure, say N.
 832
 833 config PATA_CMD640_PCI
 834         tristate "CMD640 PCI PATA support (Experimental)"
 835         depends on PCI
 836         help
 837           This option enables support for the CMD640 PCI IDE
 838           interface chip. Only the primary channel is currently
 839           supported.
 840
 841           If unsure, say N.
 842
 843 config PATA_ISAPNP
 844         tristate "ISA Plug and Play PATA support"
 845         depends on ISAPNP
 846         help
 847           This option enables support for ISA plug & play ATA
 848           controllers such as those found on old soundcards.
 849
 850           If unsure, say N.
 851
 852 config PATA_IXP4XX_CF
 853         tristate "IXP4XX Compact Flash support"
 854         depends on ARCH_IXP4XX
 855         help
 856           This option enables support for a Compact Flash connected on
 857           the ixp4xx expansion bus. This driver had been written for
 858           Loft/Avila boards in mind but can work with others.
 859
 860           If unsure, say N.
 861
 862 config PATA_MPIIX
 863         tristate "Intel PATA MPIIX support"
 864         depends on PCI
 865         help
 866           This option enables support for MPIIX PATA support.
 867
 868           If unsure, say N.
 869
 870 config PATA_NS87410
 871         tristate "Nat Semi NS87410 PATA support"
 872         depends on PCI
 873         help
 874           This option enables support for the National Semiconductor
 875           NS87410 PCI-IDE controller.
 876
 877           If unsure, say N.
 878
 879 config PATA_OPTI
 880         tristate "OPTI621/6215 PATA support (Very Experimental)"
 881         depends on PCI
 882         help
 883           This option enables full PIO support for the early Opti ATA
 884           controllers found on some old motherboards.
 885
 886           If unsure, say N.
 887
 888 config PATA_PALMLD
 889         tristate "Palm LifeDrive PATA support"
 890         depends on MACH_PALMLD
 891         help
 892           This option enables support for Palm LifeDrive's internal ATA
 893           port via the new ATA layer.
 894
 895           If unsure, say N.
 896
 897 config PATA_PCMCIA
 898         tristate "PCMCIA PATA support"
 899         depends on PCMCIA
 900         help
 901           This option enables support for PCMCIA ATA interfaces, including
 902           compact flash card adapters via the new ATA layer.
 903
 904           If unsure, say N.
 905
 906 config PATA_PLATFORM
 907         tristate "Generic platform device PATA support"
 908         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 909         help
 910           This option enables support for generic directly connected ATA
 911           devices commonly found on embedded systems.
 912
 913           If unsure, say N.
 914
 915 config PATA_OF_PLATFORM
 916         tristate "OpenFirmware platform device PATA support"
 917         depends on PATA_PLATFORM && OF
 918         help
 919           This option enables support for generic directly connected ATA
 920           devices commonly found on embedded systems with OpenFirmware
 921           bindings.
 922
 923           If unsure, say N.
 924
 925 config PATA_QDI
 926         tristate "QDI VLB PATA support"
 927         depends on ISA
 928         select PATA_LEGACY
 929         help
 930           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 931
 932 config PATA_RB532
 933         tristate "RouterBoard 532 PATA CompactFlash support"
 934         depends on MIKROTIK_RB532
 935         help
 936           This option enables support for the RouterBoard 532
 937           PATA CompactFlash controller.
 938
 939           If unsure, say N.
 940
 941 config PATA_RZ1000
 942         tristate "PC Tech RZ1000 PATA support"
 943         depends on PCI
 944         help
 945           This option enables basic support for the PC Tech RZ1000/1
 946           PATA controllers via the new ATA layer
 947
 948           If unsure, say N.
 949
 950 config PATA_SAMSUNG_CF
 951         tristate "Samsung SoC PATA support"
 952         depends on SAMSUNG_DEV_IDE
 953         help
 954           This option enables basic support for Samsung's S3C/S5P board
 955           PATA controllers via the new ATA layer
 956
 957           If unsure, say N.
 958
 959 config PATA_WINBOND_VLB
 960         tristate "Winbond W83759A VLB PATA support (Experimental)"
 961         depends on ISA
 962         select PATA_LEGACY
 963         help
 964           Support for the Winbond W83759A controller on Vesa Local Bus
 965           systems.
 966
 967 comment "Generic fallback / legacy drivers"
 968
 969 config PATA_ACPI
 970         tristate "ACPI firmware driver for PATA"
 971         depends on ATA_ACPI && ATA_BMDMA
 972         help
 973           This option enables an ACPI method driver which drives
 974           motherboard PATA controller interfaces through the ACPI
 975           firmware in the BIOS. This driver can sometimes handle
 976           otherwise unsupported hardware.
 977
 978 config ATA_GENERIC
 979         tristate "Generic ATA support"
 980         depends on PCI && ATA_BMDMA
 981         help
 982           This option enables support for generic BIOS configured
 983           ATA controllers via the new ATA layer
 984
 985           If unsure, say N.
 986
 987 config PATA_LEGACY
 988         tristate "Legacy ISA PATA support (Experimental)"
 989         depends on (ISA || PCI)
 990         help
 991           This option enables support for ISA/VLB/PCI bus legacy PATA
 992           ports and allows them to be accessed via the new ATA layer.
 993
 994           If unsure, say N.
 995
 996 endif # ATA_SFF
 997 endif # ATA