2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "Freescale 3.0Gbps SATA support"
104 This option enables support for Freescale 3.0Gbps SATA controller.
105 It can be found on MPC837x and MPC8315.
110 tristate "Initio 162x SATA support"
113 This option enables support for Initio 162x Serial ATA.
115 config SATA_ACARD_AHCI
116 tristate "ACard AHCI variant (ATP 8620)"
119 This option enables support for Acard.
124 tristate "Silicon Image 3124/3132 SATA support"
127 This option enables support for Silicon Image 3124/3132 Serial ATA.
132 bool "ATA SFF support (for legacy IDE and PATA)"
135 This option adds support for ATA controllers with SFF
136 compliant or similar programming interface.
138 SFF is the legacy IDE interface that has been around since
139 the dawn of time. Almost all PATA controllers have an
140 SFF interface. Many SATA controllers have an SFF interface
141 when configured into a legacy compatibility mode.
143 For users with exclusively modern controllers like AHCI,
144 Silicon Image 3124, or Marvell 6440, you may choose to
145 disable this unneeded SFF support.
151 comment "SFF controllers with custom DMA interface"
154 tristate "Pacific Digital ADMA support"
157 This option enables support for Pacific Digital ADMA controllers
161 config PATA_OCTEON_CF
162 tristate "OCTEON Boot Bus Compact Flash support"
163 depends on CAVIUM_OCTEON_SOC
165 This option enables a polled compact flash driver for use with
166 compact flash cards attached to the OCTEON boot bus.
171 tristate "Pacific Digital SATA QStor support"
174 This option enables support for Pacific Digital Serial ATA QStor.
179 tristate "Promise SATA SX4 support (Experimental)"
182 This option enables support for Promise Serial ATA SX4.
187 bool "ATA BMDMA support"
190 This option adds support for SFF ATA controllers with BMDMA
191 capability. BMDMA stands for bus-master DMA and is the
192 de facto DMA interface for SFF controllers.
198 comment "SATA SFF controllers with BMDMA"
201 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
204 This option enables support for ICH5/6/7/8 Serial ATA
205 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
211 tristate "DesignWare Cores SATA support"
214 This option enables support for the on-chip SATA controller of the
215 AppliedMicro processor 460EX.
219 config SATA_DWC_DEBUG
220 bool "Debugging driver version"
223 This option enables debugging output in the driver.
225 config SATA_DWC_VDEBUG
226 bool "Verbose debug output"
227 depends on SATA_DWC_DEBUG
229 This option enables the taskfile dumping and NCQ debugging.
232 tristate "Calxeda Highbank SATA support"
234 This option enables support for the Calxeda Highbank SoC's
240 tristate "Marvell SATA support"
242 This option enables support for the Marvell Serial ATA family.
243 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
244 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
249 tristate "NVIDIA SATA support"
252 This option enables support for NVIDIA Serial ATA.
257 tristate "Promise SATA TX2/TX4 support"
260 This option enables support for Promise Serial ATA TX2/TX4.
265 tristate "Renesas R-Car SATA support"
267 This option enables support for Renesas R-Car Serial ATA.
272 tristate "Silicon Image SATA support"
275 This option enables support for Silicon Image Serial ATA.
280 tristate "SiS 964/965/966/180 SATA support"
284 This option enables support for SiS Serial ATA on
285 SiS 964/965/966/180 and Parallel ATA on SiS 180.
286 The PATA support for SiS 180 requires additionally to
287 enable the PATA_SIS driver in the config.
291 tristate "ServerWorks Frodo / Apple K2 SATA support"
294 This option enables support for Broadcom/Serverworks/Apple K2
300 tristate "ULi Electronics SATA support"
303 This option enables support for ULi Electronics SATA.
308 tristate "VIA SATA support"
311 This option enables support for VIA Serial ATA.
316 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
319 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
323 comment "PATA SFF controllers with BMDMA"
326 tristate "ALi PATA support"
329 This option enables support for the ALi ATA interfaces
330 found on the many ALi chipsets.
335 tristate "AMD/NVidia PATA support"
338 This option enables support for the AMD and NVidia PATA
339 interfaces found on the chipsets for Athlon/Athlon64.
343 config PATA_ARASAN_CF
344 tristate "ARASAN CompactFlash PATA Controller Support"
345 depends on DMADEVICES
348 Say Y here to support the ARASAN CompactFlash PATA controller
351 tristate "ARTOP 6210/6260 PATA support"
354 This option enables support for ARTOP PATA controllers.
359 tristate "ATI PATA support"
362 This option enables support for the ATI ATA interfaces
363 found on the many ATI chipsets.
368 tristate "ARTOP/Acard ATP867X PATA support"
371 This option enables support for ARTOP/Acard ATP867X PATA
377 tristate "Blackfin 54x ATAPI support"
378 depends on BF542 || BF548 || BF549
380 This option enables support for the built-in ATAPI controller on
381 Blackfin 54x family chips.
386 tristate "CMD64x PATA support"
389 This option enables support for the CMD64x series chips
390 except for the CMD640.
395 tristate "CS5510/5520 PATA support"
398 This option enables support for the Cyrix 5510/5520
399 companion chip used with the MediaGX/Geode processor family.
404 tristate "CS5530 PATA support"
407 This option enables support for the Cyrix/NatSemi/AMD CS5530
408 companion chip used with the MediaGX/Geode processor family.
413 tristate "CS5535 PATA support (Experimental)"
414 depends on PCI && X86 && !X86_64
416 This option enables support for the NatSemi/AMD CS5535
417 companion chip used with the Geode processor family.
422 tristate "CS5536 PATA support"
425 This option enables support for the AMD CS5536
426 companion chip used with the Geode LX processor family.
431 tristate "Cypress CY82C693 PATA support (Very Experimental)"
434 This option enables support for the Cypress/Contaq CY82C693
435 chipset found in some Alpha systems
440 tristate "EFAR SLC90E66 support"
443 This option enables support for the EFAR SLC90E66
444 IDE controller found on some older machines.
449 tristate "Cirrus Logic EP93xx PATA support"
450 depends on ARCH_EP93XX
452 This option enables support for the PATA controller in
453 the Cirrus Logic EP9312 and EP9315 ARM CPU.
458 tristate "HPT 366/368 PATA support"
461 This option enables support for the HPT 366 and 368
462 PATA controllers via the new ATA layer.
467 tristate "HPT 370/370A/371/372/374/302 PATA support"
470 This option enables support for the majority of the later HPT
471 PATA controllers via the new ATA layer.
476 tristate "HPT 371N/372N/302N PATA support"
479 This option enables support for the N variant HPT PATA
480 controllers via the new ATA layer.
485 tristate "HPT 343/363 PATA support"
488 This option enables support for the HPT 343/363
489 PATA controllers via the new ATA layer
493 config PATA_HPT3X3_DMA
494 bool "HPT 343/363 DMA support"
495 depends on PATA_HPT3X3
497 This option enables DMA support for the HPT343/363
498 controllers. Enable with care as there are still some
499 problems with DMA on this chipset.
502 tristate "Acorn ICS PATA support"
503 depends on ARM && ARCH_ACORN
505 On Acorn systems, say Y here if you wish to use the ICS PATA
506 interface card. This is not required for ICS partition support.
507 If you are unsure, say N to this.
510 tristate "PATA support for Freescale iMX"
513 This option enables support for the PATA host available on Freescale
519 tristate "IT8213 PATA support (Experimental)"
522 This option enables support for the ITE 821 PATA
523 controllers via the new ATA layer.
528 tristate "IT8211/2 PATA support"
531 This option enables support for the ITE 8211 and 8212
532 PATA controllers via the new ATA layer, including RAID
538 tristate "JMicron PATA support"
541 Enable support for the JMicron IDE controller, via the new
547 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
550 Most IDE capable PowerMacs have IDE busses driven by a variant
551 of this controller which is part of the Apple chipset used on
552 most PowerMac models. Some models have multiple busses using
553 different chipsets, though generally, MacIO is one of them.
556 tristate "Marvell PATA support via legacy mode"
559 This option enables limited support for the Marvell 88SE61xx ATA
560 controllers. If you wish to use only the SATA ports then select
561 the AHCI driver alone. If you wish to the use the PATA port or
562 both SATA and PATA include this driver.
567 tristate "Freescale MPC52xx SoC internal IDE"
568 depends on PPC_MPC52xx && PPC_BESTCOMM
569 select PPC_BESTCOMM_ATA
571 This option enables support for integrated IDE controller
572 of the Freescale MPC52xx SoC.
577 tristate "NETCELL Revolution RAID support"
580 This option enables support for the Netcell Revolution RAID
586 tristate "Ninja32/Delkin Cardbus ATA support"
589 This option enables support for the Ninja32, Delkin and
590 possibly other brands of Cardbus ATA adapter
595 tristate "Nat Semi NS87415 PATA support"
598 This option enables support for the National Semiconductor
599 NS87415 PCI-IDE controller.
604 tristate "Intel PATA old PIIX support"
607 This option enables support for early PIIX PATA support.
612 tristate "OPTI FireStar PATA support (Very Experimental)"
615 This option enables DMA/PIO support for the later OPTi
616 controllers found on some old motherboards and in some
622 tristate "Promise PATA 2027x support"
625 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
630 tristate "Older Promise PATA controller support"
633 This option enables support for the Promise 20246, 20262, 20263,
634 20265 and 20267 adapters.
639 tristate "RADISYS 82600 PATA support (Experimental)"
642 This option enables support for the RADISYS 82600
643 PATA controllers via the new ATA layer
648 tristate "RDC PATA support"
651 This option enables basic support for the later RDC PATA controllers
652 controllers via the new ATA layer. For the RDC 1010, you need to
653 enable the IT821X driver instead.
658 tristate "SC1200 PATA support"
661 This option enables support for the NatSemi/AMD SC1200 SoC
662 companion chip used with the Geode processor family.
667 tristate "Toshiba's Cell Reference Set IDE support"
668 depends on PCI && PPC_CELLEB
670 This option enables support for the built-in IDE controller on
671 Toshiba Cell Reference Board.
676 tristate "Intel SCH PATA support"
679 This option enables support for Intel SCH PATA on the Intel
680 SCH (US15W, US15L, UL11L) series host controllers.
684 config PATA_SERVERWORKS
685 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
688 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
689 HT1000 PATA controllers, via the new ATA layer.
694 tristate "CMD / Silicon Image 680 PATA support"
697 This option enables support for CMD / Silicon Image 680 PATA.
702 tristate "SiS PATA support"
705 This option enables support for SiS PATA controllers
710 tristate "Toshiba Piccolo support (Experimental)"
713 Support for the Toshiba Piccolo controllers. Currently only the
714 primary channel is supported by this driver.
719 tristate "Compaq Triflex PATA support"
722 Enable support for the Compaq 'Triflex' IDE controller as found
723 on many Compaq Pentium-Pro systems, via the new ATA layer.
728 tristate "VIA PATA support"
731 This option enables support for the VIA PATA interfaces
732 found on the many VIA chipsets.
737 tristate "PXA DMA-capable PATA support"
740 This option enables support for harddrive attached to PXA CPU's bus.
742 NOTE: This driver utilizes PXA DMA controller, in case your hardware
743 is not capable of doing MWDMA, use pata_platform instead.
748 tristate "Winbond SL82C105 PATA support"
751 This option enables support for SL82C105 PATA devices found in the
752 Netwinder and some other systems
758 comment "PIO-only SFF controllers"
761 tristate "Atmel AVR32 PATA support (Experimental)"
762 depends on AVR32 && PLATFORM_AT32AP
764 This option enables support for the IDE devices on the
765 Atmel AT32AP platform.
770 tristate "PATA support for AT91SAM9260"
771 depends on ARM && ARCH_AT91
773 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
777 config PATA_CMD640_PCI
778 tristate "CMD640 PCI PATA support (Experimental)"
781 This option enables support for the CMD640 PCI IDE
782 interface chip. Only the primary channel is currently
788 tristate "ISA Plug and Play PATA support"
791 This option enables support for ISA plug & play ATA
792 controllers such as those found on old soundcards.
796 config PATA_IXP4XX_CF
797 tristate "IXP4XX Compact Flash support"
798 depends on ARCH_IXP4XX
800 This option enables support for a Compact Flash connected on
801 the ixp4xx expansion bus. This driver had been written for
802 Loft/Avila boards in mind but can work with others.
807 tristate "Intel PATA MPIIX support"
810 This option enables support for MPIIX PATA support.
815 tristate "Nat Semi NS87410 PATA support"
818 This option enables support for the National Semiconductor
819 NS87410 PCI-IDE controller.
824 tristate "OPTI621/6215 PATA support (Very Experimental)"
827 This option enables full PIO support for the early Opti ATA
828 controllers found on some old motherboards.
833 tristate "Palm LifeDrive PATA support"
834 depends on MACH_PALMLD
836 This option enables support for Palm LifeDrive's internal ATA
837 port via the new ATA layer.
842 tristate "PCMCIA PATA support"
845 This option enables support for PCMCIA ATA interfaces, including
846 compact flash card adapters via the new ATA layer.
851 tristate "Generic platform device PATA support"
852 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
854 This option enables support for generic directly connected ATA
855 devices commonly found on embedded systems.
859 config PATA_OF_PLATFORM
860 tristate "OpenFirmware platform device PATA support"
861 depends on PATA_PLATFORM && OF
863 This option enables support for generic directly connected ATA
864 devices commonly found on embedded systems with OpenFirmware
870 tristate "QDI VLB PATA support"
874 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
877 tristate "RouterBoard 532 PATA CompactFlash support"
878 depends on MIKROTIK_RB532
880 This option enables support for the RouterBoard 532
881 PATA CompactFlash controller.
886 tristate "PC Tech RZ1000 PATA support"
889 This option enables basic support for the PC Tech RZ1000/1
890 PATA controllers via the new ATA layer
894 config PATA_SAMSUNG_CF
895 tristate "Samsung SoC PATA support"
896 depends on SAMSUNG_DEV_IDE
898 This option enables basic support for Samsung's S3C/S5P board
899 PATA controllers via the new ATA layer
903 config PATA_WINBOND_VLB
904 tristate "Winbond W83759A VLB PATA support (Experimental)"
908 Support for the Winbond W83759A controller on Vesa Local Bus
911 comment "Generic fallback / legacy drivers"
914 tristate "ACPI firmware driver for PATA"
915 depends on ATA_ACPI && ATA_BMDMA
917 This option enables an ACPI method driver which drives
918 motherboard PATA controller interfaces through the ACPI
919 firmware in the BIOS. This driver can sometimes handle
920 otherwise unsupported hardware.
923 tristate "Generic ATA support"
924 depends on PCI && ATA_BMDMA
926 This option enables support for generic BIOS configured
927 ATA controllers via the new ATA layer
932 tristate "Legacy ISA PATA support (Experimental)"
933 depends on (ISA || PCI)
935 This option enables support for ISA/VLB/PCI bus legacy PATA
936 ports and allows them to be accessed via the new ATA layer.