drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config SATA_FSL
 101         tristate "Freescale 3.0Gbps SATA support"
 102         depends on FSL_SOC
 103         help
 104           This option enables support for Freescale 3.0Gbps SATA controller.
 105           It can be found on MPC837x and MPC8315.
 106
 107           If unsure, say N.
 108
 109 config SATA_INIC162X
 110         tristate "Initio 162x SATA support"
 111         depends on PCI
 112         help
 113           This option enables support for Initio 162x Serial ATA.
 114
 115 config SATA_ACARD_AHCI
 116         tristate "ACard AHCI variant (ATP 8620)"
 117         depends on PCI
 118         help
 119           This option enables support for Acard.
 120
 121           If unsure, say N.
 122
 123 config SATA_SIL24
 124         tristate "Silicon Image 3124/3132 SATA support"
 125         depends on PCI
 126         help
 127           This option enables support for Silicon Image 3124/3132 Serial ATA.
 128
 129           If unsure, say N.
 130
 131 config ATA_SFF
 132         bool "ATA SFF support (for legacy IDE and PATA)"
 133         default y
 134         help
 135           This option adds support for ATA controllers with SFF
 136           compliant or similar programming interface.
 137
 138           SFF is the legacy IDE interface that has been around since
 139           the dawn of time.  Almost all PATA controllers have an
 140           SFF interface.  Many SATA controllers have an SFF interface
 141           when configured into a legacy compatibility mode.
 142
 143           For users with exclusively modern controllers like AHCI,
 144           Silicon Image 3124, or Marvell 6440, you may choose to
 145           disable this unneeded SFF support.
 146
 147           If unsure, say Y.
 148
 149 if ATA_SFF
 150
 151 comment "SFF controllers with custom DMA interface"
 152
 153 config PDC_ADMA
 154         tristate "Pacific Digital ADMA support"
 155         depends on PCI
 156         help
 157           This option enables support for Pacific Digital ADMA controllers
 158
 159           If unsure, say N.
 160
 161 config PATA_OCTEON_CF
 162         tristate "OCTEON Boot Bus Compact Flash support"
 163         depends on CPU_CAVIUM_OCTEON
 164         help
 165           This option enables a polled compact flash driver for use with
 166           compact flash cards attached to the OCTEON boot bus.
 167
 168           If unsure, say N.
 169
 170 config SATA_QSTOR
 171         tristate "Pacific Digital SATA QStor support"
 172         depends on PCI
 173         help
 174           This option enables support for Pacific Digital Serial ATA QStor.
 175
 176           If unsure, say N.
 177
 178 config SATA_SX4
 179         tristate "Promise SATA SX4 support (Experimental)"
 180         depends on PCI
 181         help
 182           This option enables support for Promise Serial ATA SX4.
 183
 184           If unsure, say N.
 185
 186 config ATA_BMDMA
 187         bool "ATA BMDMA support"
 188         default y
 189         help
 190           This option adds support for SFF ATA controllers with BMDMA
 191           capability.  BMDMA stands for bus-master DMA and is the
 192           de facto DMA interface for SFF controllers.
 193
 194           If unsure, say Y.
 195
 196 if ATA_BMDMA
 197
 198 comment "SATA SFF controllers with BMDMA"
 199
 200 config ATA_PIIX
 201         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 202         depends on PCI
 203         help
 204           This option enables support for ICH5/6/7/8 Serial ATA
 205           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 206           host controllers.
 207
 208           If unsure, say N.
 209
 210 config SATA_DWC
 211         tristate "DesignWare Cores SATA support"
 212         depends on 460EX
 213         help
 214           This option enables support for the on-chip SATA controller of the
 215           AppliedMicro processor 460EX.
 216
 217           If unsure, say N.
 218
 219 config SATA_DWC_DEBUG
 220         bool "Debugging driver version"
 221         depends on SATA_DWC
 222         help
 223           This option enables debugging output in the driver.
 224
 225 config SATA_DWC_VDEBUG
 226         bool "Verbose debug output"
 227         depends on SATA_DWC_DEBUG
 228         help
 229           This option enables the taskfile dumping and NCQ debugging.
 230
 231 config SATA_HIGHBANK
 232         tristate "Calxeda Highbank SATA support"
 233         help
 234           This option enables support for the Calxeda Highbank SoC's
 235           onboard SATA.
 236
 237           If unsure, say N.
 238
 239 config SATA_MV
 240         tristate "Marvell SATA support"
 241         help
 242           This option enables support for the Marvell Serial ATA family.
 243           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 244           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 245
 246           If unsure, say N.
 247
 248 config SATA_NV
 249         tristate "NVIDIA SATA support"
 250         depends on PCI
 251         help
 252           This option enables support for NVIDIA Serial ATA.
 253
 254           If unsure, say N.
 255
 256 config SATA_PROMISE
 257         tristate "Promise SATA TX2/TX4 support"
 258         depends on PCI
 259         help
 260           This option enables support for Promise Serial ATA TX2/TX4.
 261
 262           If unsure, say N.
 263
 264 config SATA_RCAR
 265         tristate "Renesas R-Car SATA support"
 266         help
 267           This option enables support for Renesas R-Car Serial ATA.
 268
 269           If unsure, say N.
 270
 271 config SATA_SIL
 272         tristate "Silicon Image SATA support"
 273         depends on PCI
 274         help
 275           This option enables support for Silicon Image Serial ATA.
 276
 277           If unsure, say N.
 278
 279 config SATA_SIS
 280         tristate "SiS 964/965/966/180 SATA support"
 281         depends on PCI
 282         select PATA_SIS
 283         help
 284           This option enables support for SiS Serial ATA on
 285           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 286           The PATA support for SiS 180 requires additionally to
 287           enable the PATA_SIS driver in the config.
 288           If unsure, say N.
 289
 290 config SATA_SVW
 291         tristate "ServerWorks Frodo / Apple K2 SATA support"
 292         depends on PCI
 293         help
 294           This option enables support for Broadcom/Serverworks/Apple K2
 295           SATA support.
 296
 297           If unsure, say N.
 298
 299 config SATA_ULI
 300         tristate "ULi Electronics SATA support"
 301         depends on PCI
 302         help
 303           This option enables support for ULi Electronics SATA.
 304
 305           If unsure, say N.
 306
 307 config SATA_VIA
 308         tristate "VIA SATA support"
 309         depends on PCI
 310         help
 311           This option enables support for VIA Serial ATA.
 312
 313           If unsure, say N.
 314
 315 config SATA_VITESSE
 316         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 317         depends on PCI
 318         help
 319           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 320
 321           If unsure, say N.
 322
 323 comment "PATA SFF controllers with BMDMA"
 324
 325 config PATA_ALI
 326         tristate "ALi PATA support"
 327         depends on PCI
 328         help
 329           This option enables support for the ALi ATA interfaces
 330           found on the many ALi chipsets.
 331
 332           If unsure, say N.
 333
 334 config PATA_AMD
 335         tristate "AMD/NVidia PATA support"
 336         depends on PCI
 337         help
 338           This option enables support for the AMD and NVidia PATA
 339           interfaces found on the chipsets for Athlon/Athlon64.
 340
 341           If unsure, say N.
 342
 343 config PATA_ARASAN_CF
 344         tristate "ARASAN CompactFlash PATA Controller Support"
 345         depends on DMADEVICES
 346         select DMA_ENGINE
 347         help
 348           Say Y here to support the ARASAN CompactFlash PATA controller
 349
 350 config PATA_ARTOP
 351         tristate "ARTOP 6210/6260 PATA support"
 352         depends on PCI
 353         help
 354           This option enables support for ARTOP PATA controllers.
 355
 356           If unsure, say N.
 357
 358 config PATA_ATIIXP
 359         tristate "ATI PATA support"
 360         depends on PCI
 361         help
 362           This option enables support for the ATI ATA interfaces
 363           found on the many ATI chipsets.
 364
 365           If unsure, say N.
 366
 367 config PATA_ATP867X
 368         tristate "ARTOP/Acard ATP867X PATA support"
 369         depends on PCI
 370         help
 371           This option enables support for ARTOP/Acard ATP867X PATA
 372           controllers.
 373
 374           If unsure, say N.
 375
 376 config PATA_BF54X
 377         tristate "Blackfin 54x ATAPI support"
 378         depends on BF542 || BF548 || BF549
 379         help
 380           This option enables support for the built-in ATAPI controller on
 381           Blackfin 54x family chips.
 382
 383           If unsure, say N.
 384
 385 config PATA_CMD64X
 386         tristate "CMD64x PATA support"
 387         depends on PCI
 388         help
 389           This option enables support for the CMD64x series chips
 390           except for the CMD640.
 391
 392           If unsure, say N.
 393
 394 config PATA_CS5520
 395         tristate "CS5510/5520 PATA support"
 396         depends on PCI
 397         help
 398           This option enables support for the Cyrix 5510/5520
 399           companion chip used with the MediaGX/Geode processor family.
 400
 401           If unsure, say N.
 402
 403 config PATA_CS5530
 404         tristate "CS5530 PATA support"
 405         depends on PCI
 406         help
 407           This option enables support for the Cyrix/NatSemi/AMD CS5530
 408           companion chip used with the MediaGX/Geode processor family.
 409
 410           If unsure, say N.
 411
 412 config PATA_CS5535
 413         tristate "CS5535 PATA support (Experimental)"
 414         depends on PCI && X86 && !X86_64
 415         help
 416           This option enables support for the NatSemi/AMD CS5535
 417           companion chip used with the Geode processor family.
 418
 419           If unsure, say N.
 420
 421 config PATA_CS5536
 422         tristate "CS5536 PATA support"
 423         depends on PCI
 424         help
 425           This option enables support for the AMD CS5536
 426           companion chip used with the Geode LX processor family.
 427
 428           If unsure, say N.
 429
 430 config PATA_CYPRESS
 431         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 432         depends on PCI
 433         help
 434           This option enables support for the Cypress/Contaq CY82C693
 435           chipset found in some Alpha systems
 436
 437           If unsure, say N.
 438
 439 config PATA_EFAR
 440         tristate "EFAR SLC90E66 support"
 441         depends on PCI
 442         help
 443           This option enables support for the EFAR SLC90E66
 444           IDE controller found on some older machines.
 445
 446           If unsure, say N.
 447
 448 config PATA_EP93XX
 449         tristate "Cirrus Logic EP93xx PATA support"
 450         depends on ARCH_EP93XX
 451         help
 452           This option enables support for the PATA controller in
 453           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 454
 455           If unsure, say N.
 456
 457 config PATA_HPT366
 458         tristate "HPT 366/368 PATA support"
 459         depends on PCI
 460         help
 461           This option enables support for the HPT 366 and 368
 462           PATA controllers via the new ATA layer.
 463
 464           If unsure, say N.
 465
 466 config PATA_HPT37X
 467         tristate "HPT 370/370A/371/372/374/302 PATA support"
 468         depends on PCI
 469         help
 470           This option enables support for the majority of the later HPT
 471           PATA controllers via the new ATA layer.
 472
 473           If unsure, say N.
 474
 475 config PATA_HPT3X2N
 476         tristate "HPT 371N/372N/302N PATA support"
 477         depends on PCI
 478         help
 479           This option enables support for the N variant HPT PATA
 480           controllers via the new ATA layer.
 481
 482           If unsure, say N.
 483
 484 config PATA_HPT3X3
 485         tristate "HPT 343/363 PATA support"
 486         depends on PCI
 487         help
 488           This option enables support for the HPT 343/363
 489           PATA controllers via the new ATA layer
 490
 491           If unsure, say N.
 492
 493 config PATA_HPT3X3_DMA
 494         bool "HPT 343/363 DMA support"
 495         depends on PATA_HPT3X3
 496         help
 497           This option enables DMA support for the HPT343/363
 498           controllers. Enable with care as there are still some
 499           problems with DMA on this chipset.
 500
 501 config PATA_ICSIDE
 502         tristate "Acorn ICS PATA support"
 503         depends on ARM && ARCH_ACORN
 504         help
 505           On Acorn systems, say Y here if you wish to use the ICS PATA
 506           interface card.  This is not required for ICS partition support.
 507           If you are unsure, say N to this.
 508
 509 config PATA_IMX
 510         tristate "PATA support for Freescale iMX"
 511         depends on ARCH_MXC
 512         help
 513           This option enables support for the PATA host available on Freescale
 514           iMX SoCs.
 515
 516           If unsure, say N.
 517
 518 config PATA_IT8213
 519         tristate "IT8213 PATA support (Experimental)"
 520         depends on PCI
 521         help
 522           This option enables support for the ITE 821 PATA
 523           controllers via the new ATA layer.
 524
 525           If unsure, say N.
 526
 527 config PATA_IT821X
 528         tristate "IT8211/2 PATA support"
 529         depends on PCI
 530         help
 531           This option enables support for the ITE 8211 and 8212
 532           PATA controllers via the new ATA layer, including RAID
 533           mode.
 534
 535           If unsure, say N.
 536
 537 config PATA_JMICRON
 538         tristate "JMicron PATA support"
 539         depends on PCI
 540         help
 541           Enable support for the JMicron IDE controller, via the new
 542           ATA layer.
 543
 544           If unsure, say N.
 545
 546 config PATA_MACIO
 547         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 548         depends on PPC_PMAC
 549         help
 550           Most IDE capable PowerMacs have IDE busses driven by a variant
 551           of this controller which is part of the Apple chipset used on
 552           most PowerMac models. Some models have multiple busses using
 553           different chipsets, though generally, MacIO is one of them.
 554
 555 config PATA_MARVELL
 556         tristate "Marvell PATA support via legacy mode"
 557         depends on PCI
 558         help
 559           This option enables limited support for the Marvell 88SE61xx ATA
 560           controllers. If you wish to use only the SATA ports then select
 561           the AHCI driver alone. If you wish to the use the PATA port or
 562           both SATA and PATA include this driver.
 563
 564           If unsure, say N.
 565
 566 config PATA_MPC52xx
 567         tristate "Freescale MPC52xx SoC internal IDE"
 568         depends on PPC_MPC52xx && PPC_BESTCOMM
 569         select PPC_BESTCOMM_ATA
 570         help
 571           This option enables support for integrated IDE controller
 572           of the Freescale MPC52xx SoC.
 573
 574           If unsure, say N.
 575
 576 config PATA_NETCELL
 577         tristate "NETCELL Revolution RAID support"
 578         depends on PCI
 579         help
 580           This option enables support for the Netcell Revolution RAID
 581           PATA controller.
 582
 583           If unsure, say N.
 584
 585 config PATA_NINJA32
 586         tristate "Ninja32/Delkin Cardbus ATA support"
 587         depends on PCI
 588         help
 589           This option enables support for the Ninja32, Delkin and
 590           possibly other brands of Cardbus ATA adapter
 591
 592           If unsure, say N.
 593
 594 config PATA_NS87415
 595         tristate "Nat Semi NS87415 PATA support"
 596         depends on PCI
 597         help
 598           This option enables support for the National Semiconductor
 599           NS87415 PCI-IDE controller.
 600
 601           If unsure, say N.
 602
 603 config PATA_OLDPIIX
 604         tristate "Intel PATA old PIIX support"
 605         depends on PCI
 606         help
 607           This option enables support for early PIIX PATA support.
 608
 609           If unsure, say N.
 610
 611 config PATA_OPTIDMA
 612         tristate "OPTI FireStar PATA support (Very Experimental)"
 613         depends on PCI
 614         help
 615           This option enables DMA/PIO support for the later OPTi
 616           controllers found on some old motherboards and in some
 617           laptops.
 618
 619           If unsure, say N.
 620
 621 config PATA_PDC2027X
 622         tristate "Promise PATA 2027x support"
 623         depends on PCI
 624         help
 625           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 626
 627           If unsure, say N.
 628
 629 config PATA_PDC_OLD
 630         tristate "Older Promise PATA controller support"
 631         depends on PCI
 632         help
 633           This option enables support for the Promise 20246, 20262, 20263,
 634           20265 and 20267 adapters.
 635
 636           If unsure, say N.
 637
 638 config PATA_RADISYS
 639         tristate "RADISYS 82600 PATA support (Experimental)"
 640         depends on PCI
 641         help
 642           This option enables support for the RADISYS 82600
 643           PATA controllers via the new ATA layer
 644
 645           If unsure, say N.
 646
 647 config PATA_RDC
 648         tristate "RDC PATA support"
 649         depends on PCI
 650         help
 651           This option enables basic support for the later RDC PATA controllers
 652           controllers via the new ATA layer. For the RDC 1010, you need to
 653           enable the IT821X driver instead.
 654
 655           If unsure, say N.
 656
 657 config PATA_SC1200
 658         tristate "SC1200 PATA support"
 659         depends on PCI
 660         help
 661           This option enables support for the NatSemi/AMD SC1200 SoC
 662           companion chip used with the Geode processor family.
 663
 664           If unsure, say N.
 665
 666 config PATA_SCC
 667         tristate "Toshiba's Cell Reference Set IDE support"
 668         depends on PCI && PPC_CELLEB
 669         help
 670           This option enables support for the built-in IDE controller on
 671           Toshiba Cell Reference Board.
 672
 673           If unsure, say N.
 674
 675 config PATA_SCH
 676         tristate "Intel SCH PATA support"
 677         depends on PCI
 678         help
 679           This option enables support for Intel SCH PATA on the Intel
 680           SCH (US15W, US15L, UL11L) series host controllers.
 681
 682           If unsure, say N.
 683
 684 config PATA_SERVERWORKS
 685         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 686         depends on PCI
 687         help
 688           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 689           HT1000 PATA controllers, via the new ATA layer.
 690
 691           If unsure, say N.
 692
 693 config PATA_SIL680
 694         tristate "CMD / Silicon Image 680 PATA support"
 695         depends on PCI
 696         help
 697           This option enables support for CMD / Silicon Image 680 PATA.
 698
 699           If unsure, say N.
 700
 701 config PATA_SIS
 702         tristate "SiS PATA support"
 703         depends on PCI
 704         help
 705           This option enables support for SiS PATA controllers
 706
 707           If unsure, say N.
 708
 709 config PATA_TOSHIBA
 710         tristate "Toshiba Piccolo support (Experimental)"
 711         depends on PCI
 712         help
 713           Support for the Toshiba Piccolo controllers. Currently only the
 714           primary channel is supported by this driver.
 715
 716           If unsure, say N.
 717
 718 config PATA_TRIFLEX
 719         tristate "Compaq Triflex PATA support"
 720         depends on PCI
 721         help
 722           Enable support for the Compaq 'Triflex' IDE controller as found
 723           on many Compaq Pentium-Pro systems, via the new ATA layer.
 724
 725           If unsure, say N.
 726
 727 config PATA_VIA
 728         tristate "VIA PATA support"
 729         depends on PCI
 730         help
 731           This option enables support for the VIA PATA interfaces
 732           found on the many VIA chipsets.
 733
 734           If unsure, say N.
 735
 736 config PATA_PXA
 737         tristate "PXA DMA-capable PATA support"
 738         depends on ARCH_PXA
 739         help
 740           This option enables support for harddrive attached to PXA CPU's bus.
 741
 742           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 743                 is not capable of doing MWDMA, use pata_platform instead.
 744
 745           If unsure, say N.
 746
 747 config PATA_WINBOND
 748         tristate "Winbond SL82C105 PATA support"
 749         depends on PCI
 750         help
 751           This option enables support for SL82C105 PATA devices found in the
 752           Netwinder and some other systems
 753
 754           If unsure, say N.
 755
 756 endif # ATA_BMDMA
 757
 758 comment "PIO-only SFF controllers"
 759
 760 config PATA_AT32
 761         tristate "Atmel AVR32 PATA support (Experimental)"
 762         depends on AVR32 && PLATFORM_AT32AP
 763         help
 764           This option enables support for the IDE devices on the
 765           Atmel AT32AP platform.
 766
 767           If unsure, say N.
 768
 769 config PATA_AT91
 770         tristate "PATA support for AT91SAM9260"
 771         depends on ARM && ARCH_AT91
 772         help
 773           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 774
 775           If unsure, say N.
 776
 777 config PATA_CMD640_PCI
 778         tristate "CMD640 PCI PATA support (Experimental)"
 779         depends on PCI
 780         help
 781           This option enables support for the CMD640 PCI IDE
 782           interface chip. Only the primary channel is currently
 783           supported.
 784
 785           If unsure, say N.
 786
 787 config PATA_ISAPNP
 788         tristate "ISA Plug and Play PATA support"
 789         depends on ISAPNP
 790         help
 791           This option enables support for ISA plug & play ATA
 792           controllers such as those found on old soundcards.
 793
 794           If unsure, say N.
 795
 796 config PATA_IXP4XX_CF
 797         tristate "IXP4XX Compact Flash support"
 798         depends on ARCH_IXP4XX
 799         help
 800           This option enables support for a Compact Flash connected on
 801           the ixp4xx expansion bus. This driver had been written for
 802           Loft/Avila boards in mind but can work with others.
 803
 804           If unsure, say N.
 805
 806 config PATA_MPIIX
 807         tristate "Intel PATA MPIIX support"
 808         depends on PCI
 809         help
 810           This option enables support for MPIIX PATA support.
 811
 812           If unsure, say N.
 813
 814 config PATA_NS87410
 815         tristate "Nat Semi NS87410 PATA support"
 816         depends on PCI
 817         help
 818           This option enables support for the National Semiconductor
 819           NS87410 PCI-IDE controller.
 820
 821           If unsure, say N.
 822
 823 config PATA_OPTI
 824         tristate "OPTI621/6215 PATA support (Very Experimental)"
 825         depends on PCI
 826         help
 827           This option enables full PIO support for the early Opti ATA
 828           controllers found on some old motherboards.
 829
 830           If unsure, say N.
 831
 832 config PATA_PALMLD
 833         tristate "Palm LifeDrive PATA support"
 834         depends on MACH_PALMLD
 835         help
 836           This option enables support for Palm LifeDrive's internal ATA
 837           port via the new ATA layer.
 838
 839           If unsure, say N.
 840
 841 config PATA_PCMCIA
 842         tristate "PCMCIA PATA support"
 843         depends on PCMCIA
 844         help
 845           This option enables support for PCMCIA ATA interfaces, including
 846           compact flash card adapters via the new ATA layer.
 847
 848           If unsure, say N.
 849
 850 config PATA_PLATFORM
 851         tristate "Generic platform device PATA support"
 852         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 853         help
 854           This option enables support for generic directly connected ATA
 855           devices commonly found on embedded systems.
 856
 857           If unsure, say N.
 858
 859 config PATA_OF_PLATFORM
 860         tristate "OpenFirmware platform device PATA support"
 861         depends on PATA_PLATFORM && OF
 862         help
 863           This option enables support for generic directly connected ATA
 864           devices commonly found on embedded systems with OpenFirmware
 865           bindings.
 866
 867           If unsure, say N.
 868
 869 config PATA_QDI
 870         tristate "QDI VLB PATA support"
 871         depends on ISA
 872         select PATA_LEGACY
 873         help
 874           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 875
 876 config PATA_RB532
 877         tristate "RouterBoard 532 PATA CompactFlash support"
 878         depends on MIKROTIK_RB532
 879         help
 880           This option enables support for the RouterBoard 532
 881           PATA CompactFlash controller.
 882
 883           If unsure, say N.
 884
 885 config PATA_RZ1000
 886         tristate "PC Tech RZ1000 PATA support"
 887         depends on PCI
 888         help
 889           This option enables basic support for the PC Tech RZ1000/1
 890           PATA controllers via the new ATA layer
 891
 892           If unsure, say N.
 893
 894 config PATA_SAMSUNG_CF
 895         tristate "Samsung SoC PATA support"
 896         depends on SAMSUNG_DEV_IDE
 897         help
 898           This option enables basic support for Samsung's S3C/S5P board
 899           PATA controllers via the new ATA layer
 900
 901           If unsure, say N.
 902
 903 config PATA_WINBOND_VLB
 904         tristate "Winbond W83759A VLB PATA support (Experimental)"
 905         depends on ISA
 906         select PATA_LEGACY
 907         help
 908           Support for the Winbond W83759A controller on Vesa Local Bus
 909           systems.
 910
 911 comment "Generic fallback / legacy drivers"
 912
 913 config PATA_ACPI
 914         tristate "ACPI firmware driver for PATA"
 915         depends on ATA_ACPI && ATA_BMDMA
 916         help
 917           This option enables an ACPI method driver which drives
 918           motherboard PATA controller interfaces through the ACPI
 919           firmware in the BIOS. This driver can sometimes handle
 920           otherwise unsupported hardware.
 921
 922 config ATA_GENERIC
 923         tristate "Generic ATA support"
 924         depends on PCI && ATA_BMDMA
 925         help
 926           This option enables support for generic BIOS configured
 927           ATA controllers via the new ATA layer
 928
 929           If unsure, say N.
 930
 931 config PATA_LEGACY
 932         tristate "Legacy ISA PATA support (Experimental)"
 933         depends on (ISA || PCI)
 934         help
 935           This option enables support for ISA/VLB/PCI bus legacy PATA
 936           ports and allows them to be accessed via the new ATA layer.
 937
 938           If unsure, say N.
 939
 940 endif # ATA_SFF
 941 endif # ATA