drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         depends on !SUN4 || BROKEN
  11         select SCSI
  12         ---help---
  13           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  14           any other ATA device under Linux, say Y and make sure that you know
  15           the name of your ATA host adapter (the card inside your computer
  16           that "speaks" the ATA protocol, also called ATA controller),
  17           because you will be asked for it.
  18
  19           NOTE: ATA enables basic SCSI support; *however*,
  20           'SCSI disk support', 'SCSI tape support', or
  21           'SCSI CDROM support' may also be needed,
  22           depending on your hardware configuration.
  23
  24 if ATA
  25
  26 config ATA_NONSTANDARD
  27        bool
  28        default n
  29
  30 config ATA_ACPI
  31         bool "ATA ACPI Support"
  32         depends on ACPI && PCI
  33         select ACPI_DOCK
  34         default y
  35         help
  36           This option adds support for ATA-related ACPI objects.
  37           These ACPI objects add the ability to retrieve taskfiles
  38           from the ACPI BIOS and write them to the disk controller.
  39           These objects may be related to performance, security,
  40           power management, or other areas.
  41           You can disable this at kernel boot time by using the
  42           option libata.noacpi=1
  43
  44 config SATA_PMP
  45         bool "SATA Port Multiplier support"
  46         default y
  47         help
  48           This option adds support for SATA Port Multipliers
  49           (the SATA version of an ethernet hub, or SAS expander).
  50
  51 config SATA_AHCI
  52         tristate "AHCI SATA support"
  53         depends on PCI
  54         help
  55           This option enables support for AHCI Serial ATA.
  56
  57           If unsure, say N.
  58
  59 config SATA_SIL24
  60         tristate "Silicon Image 3124/3132 SATA support"
  61         depends on PCI
  62         help
  63           This option enables support for Silicon Image 3124/3132 Serial ATA.
  64
  65           If unsure, say N.
  66
  67 config SATA_FSL
  68         tristate "Freescale 3.0Gbps SATA support"
  69         depends on FSL_SOC
  70         help
  71           This option enables support for Freescale 3.0Gbps SATA controller.
  72           It can be found on MPC837x and MPC8315.
  73
  74           If unsure, say N.
  75
  76 config ATA_SFF
  77         bool "ATA SFF support"
  78         default y
  79         help
  80           This option adds support for ATA controllers with SFF
  81           compliant or similar programming interface.
  82
  83           SFF is the legacy IDE interface that has been around since
  84           the dawn of time.  Almost all PATA controllers have an
  85           SFF interface.  Many SATA controllers have an SFF interface
  86           when configured into a legacy compatibility mode.
  87
  88           For users with exclusively modern controllers like AHCI,
  89           Silicon Image 3124, or Marvell 6440, you may choose to
  90           disable this uneeded SFF support.
  91
  92           If unsure, say Y.
  93
  94 if ATA_SFF
  95
  96 config SATA_SVW
  97         tristate "ServerWorks Frodo / Apple K2 SATA support"
  98         depends on PCI
  99         help
 100           This option enables support for Broadcom/Serverworks/Apple K2
 101           SATA support.
 102
 103           If unsure, say N.
 104
 105 config ATA_PIIX
 106         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 107         depends on PCI
 108         help
 109           This option enables support for ICH5/6/7/8 Serial ATA
 110           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 111           host controllers.
 112
 113           If unsure, say N.
 114
 115 config SATA_MV
 116         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
 117         depends on EXPERIMENTAL
 118         help
 119           This option enables support for the Marvell Serial ATA family.
 120           Currently supports 88SX[56]0[48][01] chips.
 121
 122           If unsure, say N.
 123
 124 config SATA_NV
 125         tristate "NVIDIA SATA support"
 126         depends on PCI
 127         help
 128           This option enables support for NVIDIA Serial ATA.
 129
 130           If unsure, say N.
 131
 132 config PDC_ADMA
 133         tristate "Pacific Digital ADMA support"
 134         depends on PCI
 135         help
 136           This option enables support for Pacific Digital ADMA controllers
 137
 138           If unsure, say N.
 139
 140 config SATA_QSTOR
 141         tristate "Pacific Digital SATA QStor support"
 142         depends on PCI
 143         help
 144           This option enables support for Pacific Digital Serial ATA QStor.
 145
 146           If unsure, say N.
 147
 148 config SATA_PROMISE
 149         tristate "Promise SATA TX2/TX4 support"
 150         depends on PCI
 151         help
 152           This option enables support for Promise Serial ATA TX2/TX4.
 153
 154           If unsure, say N.
 155
 156 config SATA_SX4
 157         tristate "Promise SATA SX4 support"
 158         depends on PCI && EXPERIMENTAL
 159         help
 160           This option enables support for Promise Serial ATA SX4.
 161
 162           If unsure, say N.
 163
 164 config SATA_SIL
 165         tristate "Silicon Image SATA support"
 166         depends on PCI
 167         help
 168           This option enables support for Silicon Image Serial ATA.
 169
 170           If unsure, say N.
 171
 172 config SATA_SIS
 173         tristate "SiS 964/965/966/180 SATA support"
 174         depends on PCI
 175         select PATA_SIS
 176         help
 177           This option enables support for SiS Serial ATA on
 178           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 179           The PATA support for SiS 180 requires additionally to
 180           enable the PATA_SIS driver in the config.
 181           If unsure, say N.
 182
 183 config SATA_ULI
 184         tristate "ULi Electronics SATA support"
 185         depends on PCI
 186         help
 187           This option enables support for ULi Electronics SATA.
 188
 189           If unsure, say N.
 190
 191 config SATA_VIA
 192         tristate "VIA SATA support"
 193         depends on PCI
 194         help
 195           This option enables support for VIA Serial ATA.
 196
 197           If unsure, say N.
 198
 199 config SATA_VITESSE
 200         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 201         depends on PCI
 202         help
 203           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 204
 205           If unsure, say N.
 206
 207 config SATA_INIC162X
 208         tristate "Initio 162x SATA support"
 209         depends on PCI
 210         help
 211           This option enables support for Initio 162x Serial ATA.
 212
 213 config PATA_ACPI
 214         tristate "ACPI firmware driver for PATA"
 215         depends on ATA_ACPI
 216         help
 217           This option enables an ACPI method driver which drives
 218           motherboard PATA controller interfaces through the ACPI
 219           firmware in the BIOS. This driver can sometimes handle
 220           otherwise unsupported hardware.
 221
 222 config PATA_ALI
 223         tristate "ALi PATA support (Experimental)"
 224         depends on PCI && EXPERIMENTAL
 225         help
 226           This option enables support for the ALi ATA interfaces
 227           found on the many ALi chipsets.
 228
 229           If unsure, say N.
 230
 231 config PATA_AMD
 232         tristate "AMD/NVidia PATA support"
 233         depends on PCI
 234         help
 235           This option enables support for the AMD and NVidia PATA
 236           interfaces found on the chipsets for Athlon/Athlon64.
 237
 238           If unsure, say N.
 239
 240 config PATA_ARTOP
 241         tristate "ARTOP 6210/6260 PATA support"
 242         depends on PCI
 243         help
 244           This option enables support for ARTOP PATA controllers.
 245
 246           If unsure, say N.
 247
 248 config PATA_AT32
 249         tristate "Atmel AVR32 PATA support (Experimental)"
 250         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 251         help
 252           This option enables support for the IDE devices on the
 253           Atmel AT32AP platform.
 254
 255           If unsure, say N.
 256
 257 config PATA_ATIIXP
 258         tristate "ATI PATA support"
 259         depends on PCI
 260         help
 261           This option enables support for the ATI ATA interfaces
 262           found on the many ATI chipsets.
 263
 264           If unsure, say N.
 265
 266 config PATA_CMD640_PCI
 267         tristate "CMD640 PCI PATA support (Very Experimental)"
 268         depends on PCI && EXPERIMENTAL
 269         help
 270           This option enables support for the CMD640 PCI IDE
 271           interface chip. Only the primary channel is currently
 272           supported.
 273
 274           If unsure, say N.
 275
 276 config PATA_CMD64X
 277         tristate "CMD64x PATA support"
 278         depends on PCI
 279         help
 280           This option enables support for the CMD64x series chips
 281           except for the CMD640.
 282
 283           If unsure, say N.
 284
 285 config PATA_CS5520
 286         tristate "CS5510/5520 PATA support"
 287         depends on PCI
 288         help
 289           This option enables support for the Cyrix 5510/5520
 290           companion chip used with the MediaGX/Geode processor family.
 291
 292           If unsure, say N.
 293
 294 config PATA_CS5530
 295         tristate "CS5530 PATA support (Experimental)"
 296         depends on PCI && EXPERIMENTAL
 297         help
 298           This option enables support for the Cyrix/NatSemi/AMD CS5530
 299           companion chip used with the MediaGX/Geode processor family.
 300
 301           If unsure, say N.
 302
 303 config PATA_CS5535
 304         tristate "CS5535 PATA support (Experimental)"
 305         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 306         help
 307           This option enables support for the NatSemi/AMD CS5535
 308           companion chip used with the Geode processor family.
 309
 310           If unsure, say N.
 311
 312 config PATA_CS5536
 313         tristate "CS5536 PATA support (Experimental)"
 314         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 315         help
 316           This option enables support for the AMD CS5536
 317           companion chip used with the Geode LX processor family.
 318
 319           If unsure, say N.
 320
 321 config PATA_CYPRESS
 322         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 323         depends on PCI && EXPERIMENTAL
 324         help
 325           This option enables support for the Cypress/Contaq CY82C693
 326           chipset found in some Alpha systems
 327
 328           If unsure, say N.
 329
 330 config PATA_EFAR
 331         tristate "EFAR SLC90E66 support"
 332         depends on PCI
 333         help
 334           This option enables support for the EFAR SLC90E66
 335           IDE controller found on some older machines.
 336
 337           If unsure, say N.
 338
 339 config ATA_GENERIC
 340         tristate "Generic ATA support"
 341         depends on PCI
 342         help
 343           This option enables support for generic BIOS configured
 344           ATA controllers via the new ATA layer
 345
 346           If unsure, say N.
 347
 348 config PATA_HPT366
 349         tristate "HPT 366/368 PATA support"
 350         depends on PCI
 351         help
 352           This option enables support for the HPT 366 and 368
 353           PATA controllers via the new ATA layer.
 354
 355           If unsure, say N.
 356
 357 config PATA_HPT37X
 358         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 359         depends on PCI && EXPERIMENTAL
 360         help
 361           This option enables support for the majority of the later HPT
 362           PATA controllers via the new ATA layer.
 363
 364           If unsure, say N.
 365
 366 config PATA_HPT3X2N
 367         tristate "HPT 372N/302N PATA support (Very Experimental)"
 368         depends on PCI && EXPERIMENTAL
 369         help
 370           This option enables support for the N variant HPT PATA
 371           controllers via the new ATA layer
 372
 373           If unsure, say N.
 374
 375 config PATA_HPT3X3
 376         tristate "HPT 343/363 PATA support"
 377         depends on PCI
 378         help
 379           This option enables support for the HPT 343/363
 380           PATA controllers via the new ATA layer
 381
 382           If unsure, say N.
 383
 384 config PATA_HPT3X3_DMA
 385         bool "HPT 343/363 DMA support (Experimental)"
 386         depends on PATA_HPT3X3
 387         help
 388           This option enables DMA support for the HPT343/363
 389           controllers. Enable with care as there are still some
 390           problems with DMA on this chipset.
 391
 392 config PATA_ISAPNP
 393         tristate "ISA Plug and Play PATA support (Experimental)"
 394         depends on EXPERIMENTAL && ISAPNP
 395         help
 396           This option enables support for ISA plug & play ATA
 397           controllers such as those found on old soundcards.
 398
 399           If unsure, say N.
 400
 401 config PATA_IT821X
 402         tristate "IT8211/2 PATA support"
 403         depends on PCI
 404         help
 405           This option enables support for the ITE 8211 and 8212
 406           PATA controllers via the new ATA layer, including RAID
 407           mode.
 408
 409           If unsure, say N.
 410
 411 config PATA_IT8213
 412         tristate "IT8213 PATA support (Experimental)"
 413         depends on PCI && EXPERIMENTAL
 414         help
 415           This option enables support for the ITE 821 PATA
 416           controllers via the new ATA layer.
 417
 418           If unsure, say N.
 419
 420 config PATA_JMICRON
 421         tristate "JMicron PATA support"
 422         depends on PCI
 423         help
 424           Enable support for the JMicron IDE controller, via the new
 425           ATA layer.
 426
 427           If unsure, say N.
 428
 429 config PATA_LEGACY
 430         tristate "Legacy ISA PATA support (Experimental)"
 431         depends on ISA && EXPERIMENTAL
 432         help
 433           This option enables support for ISA/VLB bus legacy PATA
 434           ports and allows them to be accessed via the new ATA layer.
 435
 436           If unsure, say N.
 437
 438 config PATA_TRIFLEX
 439         tristate "Compaq Triflex PATA support"
 440         depends on PCI
 441         help
 442           Enable support for the Compaq 'Triflex' IDE controller as found
 443           on many Compaq Pentium-Pro systems, via the new ATA layer.
 444
 445           If unsure, say N.
 446
 447 config PATA_MARVELL
 448         tristate "Marvell PATA support via legacy mode"
 449         depends on PCI
 450         help
 451           This option enables limited support for the Marvell 88SE6145 ATA
 452           controller.
 453
 454           If unsure, say N.
 455
 456 config PATA_MPC52xx
 457         tristate "Freescale MPC52xx SoC internal IDE"
 458         depends on PPC_MPC52xx
 459         help
 460           This option enables support for integrated IDE controller
 461           of the Freescale MPC52xx SoC.
 462
 463           If unsure, say N.
 464
 465 config PATA_MPIIX
 466         tristate "Intel PATA MPIIX support"
 467         depends on PCI
 468         help
 469           This option enables support for MPIIX PATA support.
 470
 471           If unsure, say N.
 472
 473 config PATA_OLDPIIX
 474         tristate "Intel PATA old PIIX support"
 475         depends on PCI
 476         help
 477           This option enables support for early PIIX PATA support.
 478
 479           If unsure, say N.
 480
 481 config PATA_NETCELL
 482         tristate "NETCELL Revolution RAID support"
 483         depends on PCI
 484         help
 485           This option enables support for the Netcell Revolution RAID
 486           PATA controller.
 487
 488           If unsure, say N.
 489
 490 config PATA_NINJA32
 491         tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
 492         depends on PCI && EXPERIMENTAL
 493         help
 494           This option enables support for the Ninja32, Delkin and
 495           possibly other brands of Cardbus ATA adapter
 496
 497           If unsure, say N.
 498
 499 config PATA_NS87410
 500         tristate "Nat Semi NS87410 PATA support (Experimental)"
 501         depends on PCI && EXPERIMENTAL
 502         help
 503           This option enables support for the National Semiconductor
 504           NS87410 PCI-IDE controller.
 505
 506           If unsure, say N.
 507
 508 config PATA_NS87415
 509         tristate "Nat Semi NS87415 PATA support (Experimental)"
 510         depends on PCI && EXPERIMENTAL
 511         help
 512           This option enables support for the National Semiconductor
 513           NS87415 PCI-IDE controller.
 514
 515           If unsure, say N.
 516
 517 config PATA_OPTI
 518         tristate "OPTI621/6215 PATA support (Very Experimental)"
 519         depends on PCI && EXPERIMENTAL
 520         help
 521           This option enables full PIO support for the early Opti ATA
 522           controllers found on some old motherboards.
 523
 524           If unsure, say N.
 525
 526 config PATA_OPTIDMA
 527         tristate "OPTI FireStar PATA support (Very Experimental)"
 528         depends on PCI && EXPERIMENTAL
 529         help
 530           This option enables DMA/PIO support for the later OPTi
 531           controllers found on some old motherboards and in some
 532           laptops.
 533
 534           If unsure, say N.
 535
 536 config PATA_PCMCIA
 537         tristate "PCMCIA PATA support"
 538         depends on PCMCIA
 539         help
 540           This option enables support for PCMCIA ATA interfaces, including
 541           compact flash card adapters via the new ATA layer.
 542
 543           If unsure, say N.
 544
 545 config PATA_PDC_OLD
 546         tristate "Older Promise PATA controller support (Experimental)"
 547         depends on PCI && EXPERIMENTAL
 548         help
 549           This option enables support for the Promise 20246, 20262, 20263,
 550           20265 and 20267 adapters.
 551
 552           If unsure, say N.
 553
 554 config PATA_QDI
 555         tristate "QDI VLB PATA support"
 556         depends on ISA
 557         help
 558           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 559
 560 config PATA_RADISYS
 561         tristate "RADISYS 82600 PATA support (Very Experimental)"
 562         depends on PCI && EXPERIMENTAL
 563         help
 564           This option enables support for the RADISYS 82600
 565           PATA controllers via the new ATA layer
 566
 567           If unsure, say N.
 568
 569 config PATA_RB532
 570         tristate "RouterBoard 532 PATA CompactFlash support"
 571         depends on MIKROTIK_RB532
 572         help
 573           This option enables support for the RouterBoard 532
 574           PATA CompactFlash controller.
 575
 576           If unsure, say N.
 577
 578 config PATA_RZ1000
 579         tristate "PC Tech RZ1000 PATA support"
 580         depends on PCI
 581         help
 582           This option enables basic support for the PC Tech RZ1000/1
 583           PATA controllers via the new ATA layer
 584
 585           If unsure, say N.
 586
 587 config PATA_SC1200
 588         tristate "SC1200 PATA support (Very Experimental)"
 589         depends on PCI && EXPERIMENTAL
 590         help
 591           This option enables support for the NatSemi/AMD SC1200 SoC
 592           companion chip used with the Geode processor family.
 593
 594           If unsure, say N.
 595
 596 config PATA_SERVERWORKS
 597         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 598         depends on PCI
 599         help
 600           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 601           HT1000 PATA controllers, via the new ATA layer.
 602
 603           If unsure, say N.
 604
 605 config PATA_PDC2027X
 606         tristate "Promise PATA 2027x support"
 607         depends on PCI
 608         help
 609           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 610
 611           If unsure, say N.
 612
 613 config PATA_SIL680
 614         tristate "CMD / Silicon Image 680 PATA support"
 615         depends on PCI
 616         help
 617           This option enables support for CMD / Silicon Image 680 PATA.
 618
 619           If unsure, say N.
 620
 621 config PATA_SIS
 622         tristate "SiS PATA support (Experimental)"
 623         depends on PCI && EXPERIMENTAL
 624         help
 625           This option enables support for SiS PATA controllers
 626
 627           If unsure, say N.
 628
 629 config PATA_VIA
 630         tristate "VIA PATA support"
 631         depends on PCI
 632         help
 633           This option enables support for the VIA PATA interfaces
 634           found on the many VIA chipsets.
 635
 636           If unsure, say N.
 637
 638 config PATA_WINBOND
 639         tristate "Winbond SL82C105 PATA support"
 640         depends on PCI
 641         help
 642           This option enables support for SL82C105 PATA devices found in the
 643           Netwinder and some other systems
 644
 645           If unsure, say N.
 646
 647 config PATA_WINBOND_VLB
 648         tristate "Winbond W83759A VLB PATA support (Experimental)"
 649         depends on ISA && EXPERIMENTAL
 650         help
 651           Support for the Winbond W83759A controller on Vesa Local Bus
 652           systems.
 653
 654 config HAVE_PATA_PLATFORM
 655         bool
 656         help
 657           This is an internal configuration node for any machine that
 658           uses pata-platform driver to enable the relevant driver in the
 659           configuration structure without having to submit endless patches
 660           to update the PATA_PLATFORM entry.
 661
 662 config PATA_PLATFORM
 663         tristate "Generic platform device PATA support"
 664         depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
 665         help
 666           This option enables support for generic directly connected ATA
 667           devices commonly found on embedded systems.
 668
 669           If unsure, say N.
 670
 671 config PATA_OF_PLATFORM
 672         tristate "OpenFirmware platform device PATA support"
 673         depends on PATA_PLATFORM && PPC_OF
 674         help
 675           This option enables support for generic directly connected ATA
 676           devices commonly found on embedded systems with OpenFirmware
 677           bindings.
 678
 679           If unsure, say N.
 680
 681 config PATA_ICSIDE
 682         tristate "Acorn ICS PATA support"
 683         depends on ARM && ARCH_ACORN
 684         help
 685           On Acorn systems, say Y here if you wish to use the ICS PATA
 686           interface card.  This is not required for ICS partition support.
 687           If you are unsure, say N to this.
 688
 689 config PATA_IXP4XX_CF
 690         tristate "IXP4XX Compact Flash support"
 691         depends on ARCH_IXP4XX
 692         help
 693           This option enables support for a Compact Flash connected on
 694           the ixp4xx expansion bus. This driver had been written for
 695           Loft/Avila boards in mind but can work with others.
 696
 697           If unsure, say N.
 698
 699 config PATA_SCC
 700         tristate "Toshiba's Cell Reference Set IDE support"
 701         depends on PCI && PPC_CELLEB
 702         help
 703           This option enables support for the built-in IDE controller on
 704           Toshiba Cell Reference Board.
 705
 706           If unsure, say N.
 707
 708 config PATA_SCH
 709         tristate "Intel SCH PATA support"
 710         depends on PCI
 711         help
 712           This option enables support for Intel SCH PATA on the Intel
 713           SCH (US15W, US15L, UL11L) series host controllers.
 714
 715           If unsure, say N.
 716
 717 config PATA_BF54X
 718         tristate "Blackfin 54x ATAPI support"
 719         depends on BF542 || BF548 || BF549
 720         help
 721           This option enables support for the built-in ATAPI controller on
 722           Blackfin 54x family chips.
 723
 724           If unsure, say N.
 725
 726 endif # ATA_SFF
 727 endif # ATA