drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI && PM_RUNTIME
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_DA850
 101         tristate "DaVinci DA850 AHCI SATA support"
 102         depends on ARCH_DAVINCI_DA850
 103         help
 104           This option enables support for the DaVinci DA850 SoC's
 105           onboard AHCI SATA.
 106
 107           If unsure, say N.
 108
 109 config AHCI_ST
 110         tristate "ST AHCI SATA support"
 111         depends on ARCH_STI
 112         help
 113           This option enables support for ST AHCI SATA controller.
 114
 115           If unsure, say N.
 116
 117 config AHCI_IMX
 118         tristate "Freescale i.MX AHCI SATA support"
 119         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 120         help
 121           This option enables support for the Freescale i.MX SoC's
 122           onboard AHCI SATA.
 123
 124           If unsure, say N.
 125
 126 config AHCI_SUNXI
 127         tristate "Allwinner sunxi AHCI SATA support"
 128         depends on ARCH_SUNXI
 129         help
 130           This option enables support for the Allwinner sunxi SoC's
 131           onboard AHCI SATA.
 132
 133           If unsure, say N.
 134
 135 config AHCI_XGENE
 136         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 137         depends on PHY_XGENE
 138         help
 139          This option enables support for APM X-Gene SoC SATA host controller.
 140
 141 config SATA_FSL
 142         tristate "Freescale 3.0Gbps SATA support"
 143         depends on FSL_SOC
 144         help
 145           This option enables support for Freescale 3.0Gbps SATA controller.
 146           It can be found on MPC837x and MPC8315.
 147
 148           If unsure, say N.
 149
 150 config SATA_INIC162X
 151         tristate "Initio 162x SATA support (Very Experimental)"
 152         depends on PCI
 153         help
 154           This option enables support for Initio 162x Serial ATA.
 155
 156 config SATA_ACARD_AHCI
 157         tristate "ACard AHCI variant (ATP 8620)"
 158         depends on PCI
 159         help
 160           This option enables support for Acard.
 161
 162           If unsure, say N.
 163
 164 config SATA_SIL24
 165         tristate "Silicon Image 3124/3132 SATA support"
 166         depends on PCI
 167         help
 168           This option enables support for Silicon Image 3124/3132 Serial ATA.
 169
 170           If unsure, say N.
 171
 172 config ATA_SFF
 173         bool "ATA SFF support (for legacy IDE and PATA)"
 174         default y
 175         help
 176           This option adds support for ATA controllers with SFF
 177           compliant or similar programming interface.
 178
 179           SFF is the legacy IDE interface that has been around since
 180           the dawn of time.  Almost all PATA controllers have an
 181           SFF interface.  Many SATA controllers have an SFF interface
 182           when configured into a legacy compatibility mode.
 183
 184           For users with exclusively modern controllers like AHCI,
 185           Silicon Image 3124, or Marvell 6440, you may choose to
 186           disable this unneeded SFF support.
 187
 188           If unsure, say Y.
 189
 190 if ATA_SFF
 191
 192 comment "SFF controllers with custom DMA interface"
 193
 194 config PDC_ADMA
 195         tristate "Pacific Digital ADMA support"
 196         depends on PCI
 197         help
 198           This option enables support for Pacific Digital ADMA controllers
 199
 200           If unsure, say N.
 201
 202 config PATA_OCTEON_CF
 203         tristate "OCTEON Boot Bus Compact Flash support"
 204         depends on CAVIUM_OCTEON_SOC
 205         help
 206           This option enables a polled compact flash driver for use with
 207           compact flash cards attached to the OCTEON boot bus.
 208
 209           If unsure, say N.
 210
 211 config SATA_QSTOR
 212         tristate "Pacific Digital SATA QStor support"
 213         depends on PCI
 214         help
 215           This option enables support for Pacific Digital Serial ATA QStor.
 216
 217           If unsure, say N.
 218
 219 config SATA_SX4
 220         tristate "Promise SATA SX4 support (Experimental)"
 221         depends on PCI
 222         help
 223           This option enables support for Promise Serial ATA SX4.
 224
 225           If unsure, say N.
 226
 227 config ATA_BMDMA
 228         bool "ATA BMDMA support"
 229         default y
 230         help
 231           This option adds support for SFF ATA controllers with BMDMA
 232           capability.  BMDMA stands for bus-master DMA and is the
 233           de facto DMA interface for SFF controllers.
 234
 235           If unsure, say Y.
 236
 237 if ATA_BMDMA
 238
 239 comment "SATA SFF controllers with BMDMA"
 240
 241 config ATA_PIIX
 242         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 243         depends on PCI
 244         help
 245           This option enables support for ICH5/6/7/8 Serial ATA
 246           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 247           host controllers.
 248
 249           If unsure, say N.
 250
 251 config SATA_DWC
 252         tristate "DesignWare Cores SATA support"
 253         depends on 460EX
 254         help
 255           This option enables support for the on-chip SATA controller of the
 256           AppliedMicro processor 460EX.
 257
 258           If unsure, say N.
 259
 260 config SATA_DWC_DEBUG
 261         bool "Debugging driver version"
 262         depends on SATA_DWC
 263         help
 264           This option enables debugging output in the driver.
 265
 266 config SATA_DWC_VDEBUG
 267         bool "Verbose debug output"
 268         depends on SATA_DWC_DEBUG
 269         help
 270           This option enables the taskfile dumping and NCQ debugging.
 271
 272 config SATA_HIGHBANK
 273         tristate "Calxeda Highbank SATA support"
 274         depends on ARCH_HIGHBANK || COMPILE_TEST
 275         help
 276           This option enables support for the Calxeda Highbank SoC's
 277           onboard SATA.
 278
 279           If unsure, say N.
 280
 281 config SATA_MV
 282         tristate "Marvell SATA support"
 283         depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
 284                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 285         select GENERIC_PHY
 286         help
 287           This option enables support for the Marvell Serial ATA family.
 288           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 289           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 290
 291           If unsure, say N.
 292
 293 config SATA_NV
 294         tristate "NVIDIA SATA support"
 295         depends on PCI
 296         help
 297           This option enables support for NVIDIA Serial ATA.
 298
 299           If unsure, say N.
 300
 301 config SATA_PROMISE
 302         tristate "Promise SATA TX2/TX4 support"
 303         depends on PCI
 304         help
 305           This option enables support for Promise Serial ATA TX2/TX4.
 306
 307           If unsure, say N.
 308
 309 config SATA_RCAR
 310         tristate "Renesas R-Car SATA support"
 311         depends on ARCH_SHMOBILE || COMPILE_TEST
 312         help
 313           This option enables support for Renesas R-Car Serial ATA.
 314
 315           If unsure, say N.
 316
 317 config SATA_SIL
 318         tristate "Silicon Image SATA support"
 319         depends on PCI
 320         help
 321           This option enables support for Silicon Image Serial ATA.
 322
 323           If unsure, say N.
 324
 325 config SATA_SIS
 326         tristate "SiS 964/965/966/180 SATA support"
 327         depends on PCI
 328         select PATA_SIS
 329         help
 330           This option enables support for SiS Serial ATA on
 331           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 332           The PATA support for SiS 180 requires additionally to
 333           enable the PATA_SIS driver in the config.
 334           If unsure, say N.
 335
 336 config SATA_SVW
 337         tristate "ServerWorks Frodo / Apple K2 SATA support"
 338         depends on PCI
 339         help
 340           This option enables support for Broadcom/Serverworks/Apple K2
 341           SATA support.
 342
 343           If unsure, say N.
 344
 345 config SATA_ULI
 346         tristate "ULi Electronics SATA support"
 347         depends on PCI
 348         help
 349           This option enables support for ULi Electronics SATA.
 350
 351           If unsure, say N.
 352
 353 config SATA_VIA
 354         tristate "VIA SATA support"
 355         depends on PCI
 356         help
 357           This option enables support for VIA Serial ATA.
 358
 359           If unsure, say N.
 360
 361 config SATA_VITESSE
 362         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 363         depends on PCI
 364         help
 365           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 366
 367           If unsure, say N.
 368
 369 comment "PATA SFF controllers with BMDMA"
 370
 371 config PATA_ALI
 372         tristate "ALi PATA support"
 373         depends on PCI
 374         help
 375           This option enables support for the ALi ATA interfaces
 376           found on the many ALi chipsets.
 377
 378           If unsure, say N.
 379
 380 config PATA_AMD
 381         tristate "AMD/NVidia PATA support"
 382         depends on PCI
 383         help
 384           This option enables support for the AMD and NVidia PATA
 385           interfaces found on the chipsets for Athlon/Athlon64.
 386
 387           If unsure, say N.
 388
 389 config PATA_ARASAN_CF
 390         tristate "ARASAN CompactFlash PATA Controller Support"
 391         depends on ARCH_SPEAR13XX || COMPILE_TEST
 392         depends on DMADEVICES
 393         select DMA_ENGINE
 394         help
 395           Say Y here to support the ARASAN CompactFlash PATA controller
 396
 397 config PATA_ARTOP
 398         tristate "ARTOP 6210/6260 PATA support"
 399         depends on PCI
 400         help
 401           This option enables support for ARTOP PATA controllers.
 402
 403           If unsure, say N.
 404
 405 config PATA_ATIIXP
 406         tristate "ATI PATA support"
 407         depends on PCI
 408         help
 409           This option enables support for the ATI ATA interfaces
 410           found on the many ATI chipsets.
 411
 412           If unsure, say N.
 413
 414 config PATA_ATP867X
 415         tristate "ARTOP/Acard ATP867X PATA support"
 416         depends on PCI
 417         help
 418           This option enables support for ARTOP/Acard ATP867X PATA
 419           controllers.
 420
 421           If unsure, say N.
 422
 423 config PATA_BF54X
 424         tristate "Blackfin 54x ATAPI support"
 425         depends on BF542 || BF548 || BF549
 426         help
 427           This option enables support for the built-in ATAPI controller on
 428           Blackfin 54x family chips.
 429
 430           If unsure, say N.
 431
 432 config PATA_CMD64X
 433         tristate "CMD64x PATA support"
 434         depends on PCI
 435         help
 436           This option enables support for the CMD64x series chips
 437           except for the CMD640.
 438
 439           If unsure, say N.
 440
 441 config PATA_CS5520
 442         tristate "CS5510/5520 PATA support"
 443         depends on PCI && (X86_32 || COMPILE_TEST)
 444         help
 445           This option enables support for the Cyrix 5510/5520
 446           companion chip used with the MediaGX/Geode processor family.
 447
 448           If unsure, say N.
 449
 450 config PATA_CS5530
 451         tristate "CS5530 PATA support"
 452         depends on PCI && (X86_32 || COMPILE_TEST)
 453         help
 454           This option enables support for the Cyrix/NatSemi/AMD CS5530
 455           companion chip used with the MediaGX/Geode processor family.
 456
 457           If unsure, say N.
 458
 459 config PATA_CS5535
 460         tristate "CS5535 PATA support (Experimental)"
 461         depends on PCI && X86_32
 462         help
 463           This option enables support for the NatSemi/AMD CS5535
 464           companion chip used with the Geode processor family.
 465
 466           If unsure, say N.
 467
 468 config PATA_CS5536
 469         tristate "CS5536 PATA support"
 470         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 471         help
 472           This option enables support for the AMD CS5536
 473           companion chip used with the Geode LX processor family.
 474
 475           If unsure, say N.
 476
 477 config PATA_CYPRESS
 478         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 479         depends on PCI
 480         help
 481           This option enables support for the Cypress/Contaq CY82C693
 482           chipset found in some Alpha systems
 483
 484           If unsure, say N.
 485
 486 config PATA_EFAR
 487         tristate "EFAR SLC90E66 support"
 488         depends on PCI
 489         help
 490           This option enables support for the EFAR SLC90E66
 491           IDE controller found on some older machines.
 492
 493           If unsure, say N.
 494
 495 config PATA_EP93XX
 496         tristate "Cirrus Logic EP93xx PATA support"
 497         depends on ARCH_EP93XX
 498         help
 499           This option enables support for the PATA controller in
 500           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 501
 502           If unsure, say N.
 503
 504 config PATA_HPT366
 505         tristate "HPT 366/368 PATA support"
 506         depends on PCI
 507         help
 508           This option enables support for the HPT 366 and 368
 509           PATA controllers via the new ATA layer.
 510
 511           If unsure, say N.
 512
 513 config PATA_HPT37X
 514         tristate "HPT 370/370A/371/372/374/302 PATA support"
 515         depends on PCI
 516         help
 517           This option enables support for the majority of the later HPT
 518           PATA controllers via the new ATA layer.
 519
 520           If unsure, say N.
 521
 522 config PATA_HPT3X2N
 523         tristate "HPT 371N/372N/302N PATA support"
 524         depends on PCI
 525         help
 526           This option enables support for the N variant HPT PATA
 527           controllers via the new ATA layer.
 528
 529           If unsure, say N.
 530
 531 config PATA_HPT3X3
 532         tristate "HPT 343/363 PATA support"
 533         depends on PCI
 534         help
 535           This option enables support for the HPT 343/363
 536           PATA controllers via the new ATA layer
 537
 538           If unsure, say N.
 539
 540 config PATA_HPT3X3_DMA
 541         bool "HPT 343/363 DMA support"
 542         depends on PATA_HPT3X3
 543         help
 544           This option enables DMA support for the HPT343/363
 545           controllers. Enable with care as there are still some
 546           problems with DMA on this chipset.
 547
 548 config PATA_ICSIDE
 549         tristate "Acorn ICS PATA support"
 550         depends on ARM && ARCH_ACORN
 551         help
 552           On Acorn systems, say Y here if you wish to use the ICS PATA
 553           interface card.  This is not required for ICS partition support.
 554           If you are unsure, say N to this.
 555
 556 config PATA_IMX
 557         tristate "PATA support for Freescale iMX"
 558         depends on ARCH_MXC
 559         help
 560           This option enables support for the PATA host available on Freescale
 561           iMX SoCs.
 562
 563           If unsure, say N.
 564
 565 config PATA_IT8213
 566         tristate "IT8213 PATA support (Experimental)"
 567         depends on PCI
 568         help
 569           This option enables support for the ITE 821 PATA
 570           controllers via the new ATA layer.
 571
 572           If unsure, say N.
 573
 574 config PATA_IT821X
 575         tristate "IT8211/2 PATA support"
 576         depends on PCI
 577         help
 578           This option enables support for the ITE 8211 and 8212
 579           PATA controllers via the new ATA layer, including RAID
 580           mode.
 581
 582           If unsure, say N.
 583
 584 config PATA_JMICRON
 585         tristate "JMicron PATA support"
 586         depends on PCI
 587         help
 588           Enable support for the JMicron IDE controller, via the new
 589           ATA layer.
 590
 591           If unsure, say N.
 592
 593 config PATA_MACIO
 594         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 595         depends on PPC_PMAC
 596         help
 597           Most IDE capable PowerMacs have IDE busses driven by a variant
 598           of this controller which is part of the Apple chipset used on
 599           most PowerMac models. Some models have multiple busses using
 600           different chipsets, though generally, MacIO is one of them.
 601
 602 config PATA_MARVELL
 603         tristate "Marvell PATA support via legacy mode"
 604         depends on PCI
 605         help
 606           This option enables limited support for the Marvell 88SE61xx ATA
 607           controllers. If you wish to use only the SATA ports then select
 608           the AHCI driver alone. If you wish to the use the PATA port or
 609           both SATA and PATA include this driver.
 610
 611           If unsure, say N.
 612
 613 config PATA_MPC52xx
 614         tristate "Freescale MPC52xx SoC internal IDE"
 615         depends on PPC_MPC52xx && PPC_BESTCOMM
 616         select PPC_BESTCOMM_ATA
 617         help
 618           This option enables support for integrated IDE controller
 619           of the Freescale MPC52xx SoC.
 620
 621           If unsure, say N.
 622
 623 config PATA_NETCELL
 624         tristate "NETCELL Revolution RAID support"
 625         depends on PCI
 626         help
 627           This option enables support for the Netcell Revolution RAID
 628           PATA controller.
 629
 630           If unsure, say N.
 631
 632 config PATA_NINJA32
 633         tristate "Ninja32/Delkin Cardbus ATA support"
 634         depends on PCI
 635         help
 636           This option enables support for the Ninja32, Delkin and
 637           possibly other brands of Cardbus ATA adapter
 638
 639           If unsure, say N.
 640
 641 config PATA_NS87415
 642         tristate "Nat Semi NS87415 PATA support"
 643         depends on PCI
 644         help
 645           This option enables support for the National Semiconductor
 646           NS87415 PCI-IDE controller.
 647
 648           If unsure, say N.
 649
 650 config PATA_OLDPIIX
 651         tristate "Intel PATA old PIIX support"
 652         depends on PCI
 653         help
 654           This option enables support for early PIIX PATA support.
 655
 656           If unsure, say N.
 657
 658 config PATA_OPTIDMA
 659         tristate "OPTI FireStar PATA support (Very Experimental)"
 660         depends on PCI
 661         help
 662           This option enables DMA/PIO support for the later OPTi
 663           controllers found on some old motherboards and in some
 664           laptops.
 665
 666           If unsure, say N.
 667
 668 config PATA_PDC2027X
 669         tristate "Promise PATA 2027x support"
 670         depends on PCI
 671         help
 672           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 673
 674           If unsure, say N.
 675
 676 config PATA_PDC_OLD
 677         tristate "Older Promise PATA controller support"
 678         depends on PCI
 679         help
 680           This option enables support for the Promise 20246, 20262, 20263,
 681           20265 and 20267 adapters.
 682
 683           If unsure, say N.
 684
 685 config PATA_RADISYS
 686         tristate "RADISYS 82600 PATA support (Experimental)"
 687         depends on PCI
 688         help
 689           This option enables support for the RADISYS 82600
 690           PATA controllers via the new ATA layer
 691
 692           If unsure, say N.
 693
 694 config PATA_RDC
 695         tristate "RDC PATA support"
 696         depends on PCI
 697         help
 698           This option enables basic support for the later RDC PATA controllers
 699           controllers via the new ATA layer. For the RDC 1010, you need to
 700           enable the IT821X driver instead.
 701
 702           If unsure, say N.
 703
 704 config PATA_SC1200
 705         tristate "SC1200 PATA support"
 706         depends on PCI && (X86_32 || COMPILE_TEST)
 707         help
 708           This option enables support for the NatSemi/AMD SC1200 SoC
 709           companion chip used with the Geode processor family.
 710
 711           If unsure, say N.
 712
 713 config PATA_SCC
 714         tristate "Toshiba's Cell Reference Set IDE support"
 715         depends on PCI && PPC_CELLEB
 716         help
 717           This option enables support for the built-in IDE controller on
 718           Toshiba Cell Reference Board.
 719
 720           If unsure, say N.
 721
 722 config PATA_SCH
 723         tristate "Intel SCH PATA support"
 724         depends on PCI
 725         help
 726           This option enables support for Intel SCH PATA on the Intel
 727           SCH (US15W, US15L, UL11L) series host controllers.
 728
 729           If unsure, say N.
 730
 731 config PATA_SERVERWORKS
 732         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 733         depends on PCI
 734         help
 735           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 736           HT1000 PATA controllers, via the new ATA layer.
 737
 738           If unsure, say N.
 739
 740 config PATA_SIL680
 741         tristate "CMD / Silicon Image 680 PATA support"
 742         depends on PCI
 743         help
 744           This option enables support for CMD / Silicon Image 680 PATA.
 745
 746           If unsure, say N.
 747
 748 config PATA_SIS
 749         tristate "SiS PATA support"
 750         depends on PCI
 751         help
 752           This option enables support for SiS PATA controllers
 753
 754           If unsure, say N.
 755
 756 config PATA_TOSHIBA
 757         tristate "Toshiba Piccolo support (Experimental)"
 758         depends on PCI
 759         help
 760           Support for the Toshiba Piccolo controllers. Currently only the
 761           primary channel is supported by this driver.
 762
 763           If unsure, say N.
 764
 765 config PATA_TRIFLEX
 766         tristate "Compaq Triflex PATA support"
 767         depends on PCI
 768         help
 769           Enable support for the Compaq 'Triflex' IDE controller as found
 770           on many Compaq Pentium-Pro systems, via the new ATA layer.
 771
 772           If unsure, say N.
 773
 774 config PATA_VIA
 775         tristate "VIA PATA support"
 776         depends on PCI
 777         help
 778           This option enables support for the VIA PATA interfaces
 779           found on the many VIA chipsets.
 780
 781           If unsure, say N.
 782
 783 config PATA_PXA
 784         tristate "PXA DMA-capable PATA support"
 785         depends on ARCH_PXA
 786         help
 787           This option enables support for harddrive attached to PXA CPU's bus.
 788
 789           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 790                 is not capable of doing MWDMA, use pata_platform instead.
 791
 792           If unsure, say N.
 793
 794 config PATA_WINBOND
 795         tristate "Winbond SL82C105 PATA support"
 796         depends on PCI
 797         help
 798           This option enables support for SL82C105 PATA devices found in the
 799           Netwinder and some other systems
 800
 801           If unsure, say N.
 802
 803 endif # ATA_BMDMA
 804
 805 comment "PIO-only SFF controllers"
 806
 807 config PATA_AT32
 808         tristate "Atmel AVR32 PATA support (Experimental)"
 809         depends on AVR32 && PLATFORM_AT32AP
 810         help
 811           This option enables support for the IDE devices on the
 812           Atmel AT32AP platform.
 813
 814           If unsure, say N.
 815
 816 config PATA_AT91
 817         tristate "PATA support for AT91SAM9260"
 818         depends on ARM && ARCH_AT91
 819         help
 820           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 821
 822           If unsure, say N.
 823
 824 config PATA_CMD640_PCI
 825         tristate "CMD640 PCI PATA support (Experimental)"
 826         depends on PCI
 827         help
 828           This option enables support for the CMD640 PCI IDE
 829           interface chip. Only the primary channel is currently
 830           supported.
 831
 832           If unsure, say N.
 833
 834 config PATA_ISAPNP
 835         tristate "ISA Plug and Play PATA support"
 836         depends on ISAPNP
 837         help
 838           This option enables support for ISA plug & play ATA
 839           controllers such as those found on old soundcards.
 840
 841           If unsure, say N.
 842
 843 config PATA_IXP4XX_CF
 844         tristate "IXP4XX Compact Flash support"
 845         depends on ARCH_IXP4XX
 846         help
 847           This option enables support for a Compact Flash connected on
 848           the ixp4xx expansion bus. This driver had been written for
 849           Loft/Avila boards in mind but can work with others.
 850
 851           If unsure, say N.
 852
 853 config PATA_MPIIX
 854         tristate "Intel PATA MPIIX support"
 855         depends on PCI
 856         help
 857           This option enables support for MPIIX PATA support.
 858
 859           If unsure, say N.
 860
 861 config PATA_NS87410
 862         tristate "Nat Semi NS87410 PATA support"
 863         depends on PCI
 864         help
 865           This option enables support for the National Semiconductor
 866           NS87410 PCI-IDE controller.
 867
 868           If unsure, say N.
 869
 870 config PATA_OPTI
 871         tristate "OPTI621/6215 PATA support (Very Experimental)"
 872         depends on PCI
 873         help
 874           This option enables full PIO support for the early Opti ATA
 875           controllers found on some old motherboards.
 876
 877           If unsure, say N.
 878
 879 config PATA_PALMLD
 880         tristate "Palm LifeDrive PATA support"
 881         depends on MACH_PALMLD
 882         help
 883           This option enables support for Palm LifeDrive's internal ATA
 884           port via the new ATA layer.
 885
 886           If unsure, say N.
 887
 888 config PATA_PCMCIA
 889         tristate "PCMCIA PATA support"
 890         depends on PCMCIA
 891         help
 892           This option enables support for PCMCIA ATA interfaces, including
 893           compact flash card adapters via the new ATA layer.
 894
 895           If unsure, say N.
 896
 897 config PATA_PLATFORM
 898         tristate "Generic platform device PATA support"
 899         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 900         help
 901           This option enables support for generic directly connected ATA
 902           devices commonly found on embedded systems.
 903
 904           If unsure, say N.
 905
 906 config PATA_OF_PLATFORM
 907         tristate "OpenFirmware platform device PATA support"
 908         depends on PATA_PLATFORM && OF
 909         help
 910           This option enables support for generic directly connected ATA
 911           devices commonly found on embedded systems with OpenFirmware
 912           bindings.
 913
 914           If unsure, say N.
 915
 916 config PATA_QDI
 917         tristate "QDI VLB PATA support"
 918         depends on ISA
 919         select PATA_LEGACY
 920         help
 921           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 922
 923 config PATA_RB532
 924         tristate "RouterBoard 532 PATA CompactFlash support"
 925         depends on MIKROTIK_RB532
 926         help
 927           This option enables support for the RouterBoard 532
 928           PATA CompactFlash controller.
 929
 930           If unsure, say N.
 931
 932 config PATA_RZ1000
 933         tristate "PC Tech RZ1000 PATA support"
 934         depends on PCI
 935         help
 936           This option enables basic support for the PC Tech RZ1000/1
 937           PATA controllers via the new ATA layer
 938
 939           If unsure, say N.
 940
 941 config PATA_SAMSUNG_CF
 942         tristate "Samsung SoC PATA support"
 943         depends on SAMSUNG_DEV_IDE
 944         help
 945           This option enables basic support for Samsung's S3C/S5P board
 946           PATA controllers via the new ATA layer
 947
 948           If unsure, say N.
 949
 950 config PATA_WINBOND_VLB
 951         tristate "Winbond W83759A VLB PATA support (Experimental)"
 952         depends on ISA
 953         select PATA_LEGACY
 954         help
 955           Support for the Winbond W83759A controller on Vesa Local Bus
 956           systems.
 957
 958 comment "Generic fallback / legacy drivers"
 959
 960 config PATA_ACPI
 961         tristate "ACPI firmware driver for PATA"
 962         depends on ATA_ACPI && ATA_BMDMA
 963         help
 964           This option enables an ACPI method driver which drives
 965           motherboard PATA controller interfaces through the ACPI
 966           firmware in the BIOS. This driver can sometimes handle
 967           otherwise unsupported hardware.
 968
 969 config ATA_GENERIC
 970         tristate "Generic ATA support"
 971         depends on PCI && ATA_BMDMA
 972         help
 973           This option enables support for generic BIOS configured
 974           ATA controllers via the new ATA layer
 975
 976           If unsure, say N.
 977
 978 config PATA_LEGACY
 979         tristate "Legacy ISA PATA support (Experimental)"
 980         depends on (ISA || PCI)
 981         help
 982           This option enables support for ISA/VLB/PCI bus legacy PATA
 983           ports and allows them to be accessed via the new ATA layer.
 984
 985           If unsure, say N.
 986
 987 endif # ATA_SFF
 988 endif # ATA