drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_PMP
  62         bool "SATA Port Multiplier support"
  63         default y
  64         help
  65           This option adds support for SATA Port Multipliers
  66           (the SATA version of an ethernet hub, or SAS expander).
  67
  68 comment "Controllers with non-SFF native interface"
  69
  70 config SATA_AHCI
  71         tristate "AHCI SATA support"
  72         depends on PCI
  73         help
  74           This option enables support for AHCI Serial ATA.
  75
  76           If unsure, say N.
  77
  78 config SATA_AHCI_PLATFORM
  79         tristate "Platform AHCI SATA support"
  80         help
  81           This option enables support for Platform AHCI Serial ATA
  82           controllers.
  83
  84           If unsure, say N.
  85
  86 config SATA_FSL
  87         tristate "Freescale 3.0Gbps SATA support"
  88         depends on FSL_SOC
  89         help
  90           This option enables support for Freescale 3.0Gbps SATA controller.
  91           It can be found on MPC837x and MPC8315.
  92
  93           If unsure, say N.
  94
  95 config SATA_INIC162X
  96         tristate "Initio 162x SATA support"
  97         depends on PCI
  98         help
  99           This option enables support for Initio 162x Serial ATA.
 100
 101 config SATA_ACARD_AHCI
 102         tristate "ACard AHCI variant (ATP 8620)"
 103         depends on PCI
 104         help
 105           This option enables support for Acard.
 106
 107           If unsure, say N.
 108
 109 config SATA_SIL24
 110         tristate "Silicon Image 3124/3132 SATA support"
 111         depends on PCI
 112         help
 113           This option enables support for Silicon Image 3124/3132 Serial ATA.
 114
 115           If unsure, say N.
 116
 117 config ATA_SFF
 118         bool "ATA SFF support"
 119         default y
 120         help
 121           This option adds support for ATA controllers with SFF
 122           compliant or similar programming interface.
 123
 124           SFF is the legacy IDE interface that has been around since
 125           the dawn of time.  Almost all PATA controllers have an
 126           SFF interface.  Many SATA controllers have an SFF interface
 127           when configured into a legacy compatibility mode.
 128
 129           For users with exclusively modern controllers like AHCI,
 130           Silicon Image 3124, or Marvell 6440, you may choose to
 131           disable this unneeded SFF support.
 132
 133           If unsure, say Y.
 134
 135 if ATA_SFF
 136
 137 comment "SFF controllers with custom DMA interface"
 138
 139 config PDC_ADMA
 140         tristate "Pacific Digital ADMA support"
 141         depends on PCI
 142         help
 143           This option enables support for Pacific Digital ADMA controllers
 144
 145           If unsure, say N.
 146
 147 config PATA_OCTEON_CF
 148         tristate "OCTEON Boot Bus Compact Flash support"
 149         depends on CPU_CAVIUM_OCTEON
 150         help
 151           This option enables a polled compact flash driver for use with
 152           compact flash cards attached to the OCTEON boot bus.
 153
 154           If unsure, say N.
 155
 156 config SATA_QSTOR
 157         tristate "Pacific Digital SATA QStor support"
 158         depends on PCI
 159         help
 160           This option enables support for Pacific Digital Serial ATA QStor.
 161
 162           If unsure, say N.
 163
 164 config SATA_SX4
 165         tristate "Promise SATA SX4 support (Experimental)"
 166         depends on PCI && EXPERIMENTAL
 167         help
 168           This option enables support for Promise Serial ATA SX4.
 169
 170           If unsure, say N.
 171
 172 config ATA_BMDMA
 173         bool "ATA BMDMA support"
 174         default y
 175         help
 176           This option adds support for SFF ATA controllers with BMDMA
 177           capability.  BMDMA stands for bus-master DMA and is the
 178           de facto DMA interface for SFF controllers.
 179
 180           If unsure, say Y.
 181
 182 if ATA_BMDMA
 183
 184 comment "SATA SFF controllers with BMDMA"
 185
 186 config ATA_PIIX
 187         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 188         depends on PCI
 189         help
 190           This option enables support for ICH5/6/7/8 Serial ATA
 191           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 192           host controllers.
 193
 194           If unsure, say N.
 195
 196 config SATA_DWC
 197         tristate "DesignWare Cores SATA support"
 198         depends on 460EX
 199         help
 200           This option enables support for the on-chip SATA controller of the
 201           AppliedMicro processor 460EX.
 202
 203           If unsure, say N.
 204
 205 config SATA_MV
 206         tristate "Marvell SATA support"
 207         help
 208           This option enables support for the Marvell Serial ATA family.
 209           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 210           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 211
 212           If unsure, say N.
 213
 214 config SATA_NV
 215         tristate "NVIDIA SATA support"
 216         depends on PCI
 217         help
 218           This option enables support for NVIDIA Serial ATA.
 219
 220           If unsure, say N.
 221
 222 config SATA_PROMISE
 223         tristate "Promise SATA TX2/TX4 support"
 224         depends on PCI
 225         help
 226           This option enables support for Promise Serial ATA TX2/TX4.
 227
 228           If unsure, say N.
 229
 230 config SATA_SIL
 231         tristate "Silicon Image SATA support"
 232         depends on PCI
 233         help
 234           This option enables support for Silicon Image Serial ATA.
 235
 236           If unsure, say N.
 237
 238 config SATA_SIS
 239         tristate "SiS 964/965/966/180 SATA support"
 240         depends on PCI
 241         select PATA_SIS
 242         help
 243           This option enables support for SiS Serial ATA on
 244           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 245           The PATA support for SiS 180 requires additionally to
 246           enable the PATA_SIS driver in the config.
 247           If unsure, say N.
 248
 249 config SATA_SVW
 250         tristate "ServerWorks Frodo / Apple K2 SATA support"
 251         depends on PCI
 252         help
 253           This option enables support for Broadcom/Serverworks/Apple K2
 254           SATA support.
 255
 256           If unsure, say N.
 257
 258 config SATA_ULI
 259         tristate "ULi Electronics SATA support"
 260         depends on PCI
 261         help
 262           This option enables support for ULi Electronics SATA.
 263
 264           If unsure, say N.
 265
 266 config SATA_VIA
 267         tristate "VIA SATA support"
 268         depends on PCI
 269         help
 270           This option enables support for VIA Serial ATA.
 271
 272           If unsure, say N.
 273
 274 config SATA_VITESSE
 275         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 276         depends on PCI
 277         help
 278           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 279
 280           If unsure, say N.
 281
 282 comment "PATA SFF controllers with BMDMA"
 283
 284 config PATA_ALI
 285         tristate "ALi PATA support"
 286         depends on PCI
 287         help
 288           This option enables support for the ALi ATA interfaces
 289           found on the many ALi chipsets.
 290
 291           If unsure, say N.
 292
 293 config PATA_AMD
 294         tristate "AMD/NVidia PATA support"
 295         depends on PCI
 296         help
 297           This option enables support for the AMD and NVidia PATA
 298           interfaces found on the chipsets for Athlon/Athlon64.
 299
 300           If unsure, say N.
 301
 302 config PATA_ARTOP
 303         tristate "ARTOP 6210/6260 PATA support"
 304         depends on PCI
 305         help
 306           This option enables support for ARTOP PATA controllers.
 307
 308           If unsure, say N.
 309
 310 config PATA_ATIIXP
 311         tristate "ATI PATA support"
 312         depends on PCI
 313         help
 314           This option enables support for the ATI ATA interfaces
 315           found on the many ATI chipsets.
 316
 317           If unsure, say N.
 318
 319 config PATA_ATP867X
 320         tristate "ARTOP/Acard ATP867X PATA support"
 321         depends on PCI
 322         help
 323           This option enables support for ARTOP/Acard ATP867X PATA
 324           controllers.
 325
 326           If unsure, say N.
 327
 328 config PATA_BF54X
 329         tristate "Blackfin 54x ATAPI support"
 330         depends on BF542 || BF548 || BF549
 331         help
 332           This option enables support for the built-in ATAPI controller on
 333           Blackfin 54x family chips.
 334
 335           If unsure, say N.
 336
 337 config PATA_CMD64X
 338         tristate "CMD64x PATA support"
 339         depends on PCI
 340         help
 341           This option enables support for the CMD64x series chips
 342           except for the CMD640.
 343
 344           If unsure, say N.
 345
 346 config PATA_CS5520
 347         tristate "CS5510/5520 PATA support"
 348         depends on PCI
 349         help
 350           This option enables support for the Cyrix 5510/5520
 351           companion chip used with the MediaGX/Geode processor family.
 352
 353           If unsure, say N.
 354
 355 config PATA_CS5530
 356         tristate "CS5530 PATA support"
 357         depends on PCI
 358         help
 359           This option enables support for the Cyrix/NatSemi/AMD CS5530
 360           companion chip used with the MediaGX/Geode processor family.
 361
 362           If unsure, say N.
 363
 364 config PATA_CS5535
 365         tristate "CS5535 PATA support (Experimental)"
 366         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 367         help
 368           This option enables support for the NatSemi/AMD CS5535
 369           companion chip used with the Geode processor family.
 370
 371           If unsure, say N.
 372
 373 config PATA_CS5536
 374         tristate "CS5536 PATA support"
 375         depends on PCI
 376         help
 377           This option enables support for the AMD CS5536
 378           companion chip used with the Geode LX processor family.
 379
 380           If unsure, say N.
 381
 382 config PATA_CYPRESS
 383         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 384         depends on PCI && EXPERIMENTAL
 385         help
 386           This option enables support for the Cypress/Contaq CY82C693
 387           chipset found in some Alpha systems
 388
 389           If unsure, say N.
 390
 391 config PATA_EFAR
 392         tristate "EFAR SLC90E66 support"
 393         depends on PCI
 394         help
 395           This option enables support for the EFAR SLC90E66
 396           IDE controller found on some older machines.
 397
 398           If unsure, say N.
 399
 400 config PATA_HPT366
 401         tristate "HPT 366/368 PATA support"
 402         depends on PCI
 403         help
 404           This option enables support for the HPT 366 and 368
 405           PATA controllers via the new ATA layer.
 406
 407           If unsure, say N.
 408
 409 config PATA_HPT37X
 410         tristate "HPT 370/370A/371/372/374/302 PATA support"
 411         depends on PCI
 412         help
 413           This option enables support for the majority of the later HPT
 414           PATA controllers via the new ATA layer.
 415
 416           If unsure, say N.
 417
 418 config PATA_HPT3X2N
 419         tristate "HPT 371N/372N/302N PATA support"
 420         depends on PCI
 421         help
 422           This option enables support for the N variant HPT PATA
 423           controllers via the new ATA layer.
 424
 425           If unsure, say N.
 426
 427 config PATA_HPT3X3
 428         tristate "HPT 343/363 PATA support"
 429         depends on PCI
 430         help
 431           This option enables support for the HPT 343/363
 432           PATA controllers via the new ATA layer
 433
 434           If unsure, say N.
 435
 436 config PATA_HPT3X3_DMA
 437         bool "HPT 343/363 DMA support"
 438         depends on PATA_HPT3X3
 439         help
 440           This option enables DMA support for the HPT343/363
 441           controllers. Enable with care as there are still some
 442           problems with DMA on this chipset.
 443
 444 config PATA_ICSIDE
 445         tristate "Acorn ICS PATA support"
 446         depends on ARM && ARCH_ACORN
 447         help
 448           On Acorn systems, say Y here if you wish to use the ICS PATA
 449           interface card.  This is not required for ICS partition support.
 450           If you are unsure, say N to this.
 451
 452 config PATA_IT8213
 453         tristate "IT8213 PATA support (Experimental)"
 454         depends on PCI && EXPERIMENTAL
 455         help
 456           This option enables support for the ITE 821 PATA
 457           controllers via the new ATA layer.
 458
 459           If unsure, say N.
 460
 461 config PATA_IT821X
 462         tristate "IT8211/2 PATA support"
 463         depends on PCI
 464         help
 465           This option enables support for the ITE 8211 and 8212
 466           PATA controllers via the new ATA layer, including RAID
 467           mode.
 468
 469           If unsure, say N.
 470
 471 config PATA_JMICRON
 472         tristate "JMicron PATA support"
 473         depends on PCI
 474         help
 475           Enable support for the JMicron IDE controller, via the new
 476           ATA layer.
 477
 478           If unsure, say N.
 479
 480 config PATA_MACIO
 481         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 482         depends on PPC_PMAC
 483         help
 484           Most IDE capable PowerMacs have IDE busses driven by a variant
 485           of this controller which is part of the Apple chipset used on
 486           most PowerMac models. Some models have multiple busses using
 487           different chipsets, though generally, MacIO is one of them.
 488
 489 config PATA_MARVELL
 490         tristate "Marvell PATA support via legacy mode"
 491         depends on PCI
 492         help
 493           This option enables limited support for the Marvell 88SE61xx ATA
 494           controllers. If you wish to use only the SATA ports then select
 495           the AHCI driver alone. If you wish to the use the PATA port or
 496           both SATA and PATA include this driver.
 497
 498           If unsure, say N.
 499
 500 config PATA_MPC52xx
 501         tristate "Freescale MPC52xx SoC internal IDE"
 502         depends on PPC_MPC52xx && PPC_BESTCOMM
 503         select PPC_BESTCOMM_ATA
 504         help
 505           This option enables support for integrated IDE controller
 506           of the Freescale MPC52xx SoC.
 507
 508           If unsure, say N.
 509
 510 config PATA_NETCELL
 511         tristate "NETCELL Revolution RAID support"
 512         depends on PCI
 513         help
 514           This option enables support for the Netcell Revolution RAID
 515           PATA controller.
 516
 517           If unsure, say N.
 518
 519 config PATA_NINJA32
 520         tristate "Ninja32/Delkin Cardbus ATA support"
 521         depends on PCI
 522         help
 523           This option enables support for the Ninja32, Delkin and
 524           possibly other brands of Cardbus ATA adapter
 525
 526           If unsure, say N.
 527
 528 config PATA_NS87415
 529         tristate "Nat Semi NS87415 PATA support"
 530         depends on PCI
 531         help
 532           This option enables support for the National Semiconductor
 533           NS87415 PCI-IDE controller.
 534
 535           If unsure, say N.
 536
 537 config PATA_OLDPIIX
 538         tristate "Intel PATA old PIIX support"
 539         depends on PCI
 540         help
 541           This option enables support for early PIIX PATA support.
 542
 543           If unsure, say N.
 544
 545 config PATA_OPTIDMA
 546         tristate "OPTI FireStar PATA support (Very Experimental)"
 547         depends on PCI && EXPERIMENTAL
 548         help
 549           This option enables DMA/PIO support for the later OPTi
 550           controllers found on some old motherboards and in some
 551           laptops.
 552
 553           If unsure, say N.
 554
 555 config PATA_PDC2027X
 556         tristate "Promise PATA 2027x support"
 557         depends on PCI
 558         help
 559           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 560
 561           If unsure, say N.
 562
 563 config PATA_PDC_OLD
 564         tristate "Older Promise PATA controller support"
 565         depends on PCI
 566         help
 567           This option enables support for the Promise 20246, 20262, 20263,
 568           20265 and 20267 adapters.
 569
 570           If unsure, say N.
 571
 572 config PATA_RADISYS
 573         tristate "RADISYS 82600 PATA support (Experimental)"
 574         depends on PCI && EXPERIMENTAL
 575         help
 576           This option enables support for the RADISYS 82600
 577           PATA controllers via the new ATA layer
 578
 579           If unsure, say N.
 580
 581 config PATA_RDC
 582         tristate "RDC PATA support"
 583         depends on PCI
 584         help
 585           This option enables basic support for the later RDC PATA controllers
 586           controllers via the new ATA layer. For the RDC 1010, you need to
 587           enable the IT821X driver instead.
 588
 589           If unsure, say N.
 590
 591 config PATA_SC1200
 592         tristate "SC1200 PATA support"
 593         depends on PCI
 594         help
 595           This option enables support for the NatSemi/AMD SC1200 SoC
 596           companion chip used with the Geode processor family.
 597
 598           If unsure, say N.
 599
 600 config PATA_SCC
 601         tristate "Toshiba's Cell Reference Set IDE support"
 602         depends on PCI && PPC_CELLEB
 603         help
 604           This option enables support for the built-in IDE controller on
 605           Toshiba Cell Reference Board.
 606
 607           If unsure, say N.
 608
 609 config PATA_SCH
 610         tristate "Intel SCH PATA support"
 611         depends on PCI
 612         help
 613           This option enables support for Intel SCH PATA on the Intel
 614           SCH (US15W, US15L, UL11L) series host controllers.
 615
 616           If unsure, say N.
 617
 618 config PATA_SERVERWORKS
 619         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 620         depends on PCI
 621         help
 622           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 623           HT1000 PATA controllers, via the new ATA layer.
 624
 625           If unsure, say N.
 626
 627 config PATA_SIL680
 628         tristate "CMD / Silicon Image 680 PATA support"
 629         depends on PCI
 630         help
 631           This option enables support for CMD / Silicon Image 680 PATA.
 632
 633           If unsure, say N.
 634
 635 config PATA_SIS
 636         tristate "SiS PATA support"
 637         depends on PCI
 638         help
 639           This option enables support for SiS PATA controllers
 640
 641           If unsure, say N.
 642
 643 config PATA_TOSHIBA
 644         tristate "Toshiba Piccolo support (Experimental)"
 645         depends on PCI && EXPERIMENTAL
 646         help
 647           Support for the Toshiba Piccolo controllers. Currently only the
 648           primary channel is supported by this driver.
 649
 650           If unsure, say N.
 651
 652 config PATA_TRIFLEX
 653         tristate "Compaq Triflex PATA support"
 654         depends on PCI
 655         help
 656           Enable support for the Compaq 'Triflex' IDE controller as found
 657           on many Compaq Pentium-Pro systems, via the new ATA layer.
 658
 659           If unsure, say N.
 660
 661 config PATA_VIA
 662         tristate "VIA PATA support"
 663         depends on PCI
 664         help
 665           This option enables support for the VIA PATA interfaces
 666           found on the many VIA chipsets.
 667
 668           If unsure, say N.
 669
 670 config PATA_PXA
 671         tristate "PXA DMA-capable PATA support"
 672         depends on ARCH_PXA
 673         help
 674           This option enables support for harddrive attached to PXA CPU's bus.
 675
 676           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 677                 is not capable of doing MWDMA, use pata_platform instead.
 678
 679           If unsure, say N.
 680
 681 config PATA_WINBOND
 682         tristate "Winbond SL82C105 PATA support"
 683         depends on PCI
 684         help
 685           This option enables support for SL82C105 PATA devices found in the
 686           Netwinder and some other systems
 687
 688           If unsure, say N.
 689
 690 endif # ATA_BMDMA
 691
 692 comment "PIO-only SFF controllers"
 693
 694 config PATA_AT32
 695         tristate "Atmel AVR32 PATA support (Experimental)"
 696         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 697         help
 698           This option enables support for the IDE devices on the
 699           Atmel AT32AP platform.
 700
 701           If unsure, say N.
 702
 703 config PATA_AT91
 704         tristate "PATA support for AT91SAM9260"
 705         depends on ARM && ARCH_AT91
 706         help
 707           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 708
 709           If unsure, say N.
 710
 711 config PATA_CMD640_PCI
 712         tristate "CMD640 PCI PATA support (Experimental)"
 713         depends on PCI && EXPERIMENTAL
 714         help
 715           This option enables support for the CMD640 PCI IDE
 716           interface chip. Only the primary channel is currently
 717           supported.
 718
 719           If unsure, say N.
 720
 721 config PATA_ISAPNP
 722         tristate "ISA Plug and Play PATA support"
 723         depends on ISAPNP
 724         help
 725           This option enables support for ISA plug & play ATA
 726           controllers such as those found on old soundcards.
 727
 728           If unsure, say N.
 729
 730 config PATA_IXP4XX_CF
 731         tristate "IXP4XX Compact Flash support"
 732         depends on ARCH_IXP4XX
 733         help
 734           This option enables support for a Compact Flash connected on
 735           the ixp4xx expansion bus. This driver had been written for
 736           Loft/Avila boards in mind but can work with others.
 737
 738           If unsure, say N.
 739
 740 config PATA_MPIIX
 741         tristate "Intel PATA MPIIX support"
 742         depends on PCI
 743         help
 744           This option enables support for MPIIX PATA support.
 745
 746           If unsure, say N.
 747
 748 config PATA_NS87410
 749         tristate "Nat Semi NS87410 PATA support"
 750         depends on PCI
 751         help
 752           This option enables support for the National Semiconductor
 753           NS87410 PCI-IDE controller.
 754
 755           If unsure, say N.
 756
 757 config PATA_OPTI
 758         tristate "OPTI621/6215 PATA support (Very Experimental)"
 759         depends on PCI && EXPERIMENTAL
 760         help
 761           This option enables full PIO support for the early Opti ATA
 762           controllers found on some old motherboards.
 763
 764           If unsure, say N.
 765
 766 config PATA_PALMLD
 767         tristate "Palm LifeDrive PATA support"
 768         depends on MACH_PALMLD
 769         help
 770           This option enables support for Palm LifeDrive's internal ATA
 771           port via the new ATA layer.
 772
 773           If unsure, say N.
 774
 775 config PATA_PCMCIA
 776         tristate "PCMCIA PATA support"
 777         depends on PCMCIA
 778         help
 779           This option enables support for PCMCIA ATA interfaces, including
 780           compact flash card adapters via the new ATA layer.
 781
 782           If unsure, say N.
 783
 784 config PATA_PLATFORM
 785         tristate "Generic platform device PATA support"
 786         depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
 787         help
 788           This option enables support for generic directly connected ATA
 789           devices commonly found on embedded systems.
 790
 791           If unsure, say N.
 792
 793 config PATA_OF_PLATFORM
 794         tristate "OpenFirmware platform device PATA support"
 795         depends on PATA_PLATFORM && PPC_OF
 796         help
 797           This option enables support for generic directly connected ATA
 798           devices commonly found on embedded systems with OpenFirmware
 799           bindings.
 800
 801           If unsure, say N.
 802
 803 config PATA_QDI
 804         tristate "QDI VLB PATA support"
 805         depends on ISA
 806         help
 807           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 808
 809 config PATA_RB532
 810         tristate "RouterBoard 532 PATA CompactFlash support"
 811         depends on MIKROTIK_RB532
 812         help
 813           This option enables support for the RouterBoard 532
 814           PATA CompactFlash controller.
 815
 816           If unsure, say N.
 817
 818 config PATA_RZ1000
 819         tristate "PC Tech RZ1000 PATA support"
 820         depends on PCI
 821         help
 822           This option enables basic support for the PC Tech RZ1000/1
 823           PATA controllers via the new ATA layer
 824
 825           If unsure, say N.
 826
 827 config PATA_SAMSUNG_CF
 828         tristate "Samsung SoC PATA support"
 829         depends on SAMSUNG_DEV_IDE
 830         help
 831           This option enables basic support for Samsung's S3C/S5P board
 832           PATA controllers via the new ATA layer
 833
 834           If unsure, say N.
 835
 836 config PATA_WINBOND_VLB
 837         tristate "Winbond W83759A VLB PATA support (Experimental)"
 838         depends on ISA && EXPERIMENTAL
 839         select PATA_LEGACY
 840         help
 841           Support for the Winbond W83759A controller on Vesa Local Bus
 842           systems.
 843
 844 comment "Generic fallback / legacy drivers"
 845
 846 config PATA_ACPI
 847         tristate "ACPI firmware driver for PATA"
 848         depends on ATA_ACPI && ATA_BMDMA
 849         help
 850           This option enables an ACPI method driver which drives
 851           motherboard PATA controller interfaces through the ACPI
 852           firmware in the BIOS. This driver can sometimes handle
 853           otherwise unsupported hardware.
 854
 855 config ATA_GENERIC
 856         tristate "Generic ATA support"
 857         depends on PCI && ATA_BMDMA
 858         help
 859           This option enables support for generic BIOS configured
 860           ATA controllers via the new ATA layer
 861
 862           If unsure, say N.
 863
 864 config PATA_LEGACY
 865         tristate "Legacy ISA PATA support (Experimental)"
 866         depends on (ISA || PCI) && EXPERIMENTAL
 867         help
 868           This option enables support for ISA/VLB/PCI bus legacy PATA
 869           ports and allows them to be accessed via the new ATA layer.
 870
 871           If unsure, say N.
 872
 873 endif # ATA_SFF
 874 endif # ATA