drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   6
   7 config ATA
   8         tristate "ATA device support"
   9         depends on BLOCK
  10         depends on !(M32R || M68K) || BROKEN
  11         depends on !SUN4 || BROKEN
  12         select SCSI
  13         ---help---
  14           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  15           any other ATA device under Linux, say Y and make sure that you know
  16           the name of your ATA host adapter (the card inside your computer
  17           that "speaks" the ATA protocol, also called ATA controller),
  18           because you will be asked for it.
  19
  20 if ATA
  21
  22 config ATA_NONSTANDARD
  23        bool
  24        default n
  25
  26 config SATA_AHCI
  27         tristate "AHCI SATA support"
  28         depends on PCI
  29         help
  30           This option enables support for AHCI Serial ATA.
  31
  32           If unsure, say N.
  33
  34 config SATA_SVW
  35         tristate "ServerWorks Frodo / Apple K2 SATA support"
  36         depends on PCI
  37         help
  38           This option enables support for Broadcom/Serverworks/Apple K2
  39           SATA support.
  40
  41           If unsure, say N.
  42
  43 config ATA_PIIX
  44         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
  45         depends on PCI
  46         help
  47           This option enables support for ICH5/6/7/8 Serial ATA
  48           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  49           host controllers.
  50
  51           If unsure, say N.
  52
  53 config SATA_MV
  54         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
  55         depends on PCI && EXPERIMENTAL
  56         help
  57           This option enables support for the Marvell Serial ATA family.
  58           Currently supports 88SX[56]0[48][01] chips.
  59
  60           If unsure, say N.
  61
  62 config SATA_NV
  63         tristate "NVIDIA SATA support"
  64         depends on PCI
  65         help
  66           This option enables support for NVIDIA Serial ATA.
  67
  68           If unsure, say N.
  69
  70 config PDC_ADMA
  71         tristate "Pacific Digital ADMA support"
  72         depends on PCI
  73         help
  74           This option enables support for Pacific Digital ADMA controllers
  75
  76           If unsure, say N.
  77
  78 config SATA_QSTOR
  79         tristate "Pacific Digital SATA QStor support"
  80         depends on PCI
  81         help
  82           This option enables support for Pacific Digital Serial ATA QStor.
  83
  84           If unsure, say N.
  85
  86 config SATA_PROMISE
  87         tristate "Promise SATA TX2/TX4 support"
  88         depends on PCI
  89         help
  90           This option enables support for Promise Serial ATA TX2/TX4.
  91
  92           If unsure, say N.
  93
  94 config SATA_SX4
  95         tristate "Promise SATA SX4 support"
  96         depends on PCI && EXPERIMENTAL
  97         help
  98           This option enables support for Promise Serial ATA SX4.
  99
 100           If unsure, say N.
 101
 102 config SATA_SIL
 103         tristate "Silicon Image SATA support"
 104         depends on PCI
 105         help
 106           This option enables support for Silicon Image Serial ATA.
 107
 108           If unsure, say N.
 109
 110 config SATA_SIL24
 111         tristate "Silicon Image 3124/3132 SATA support"
 112         depends on PCI
 113         help
 114           This option enables support for Silicon Image 3124/3132 Serial ATA.
 115
 116           If unsure, say N.
 117
 118 config SATA_SIS
 119         tristate "SiS 964/965/966/180 SATA support"
 120         depends on PCI
 121         select PATA_SIS
 122         help
 123           This option enables support for SiS Serial ATA on
 124           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 125           The PATA support for SiS 180 requires additionally to
 126           enable the PATA_SIS driver in the config.
 127           If unsure, say N.
 128
 129 config SATA_ULI
 130         tristate "ULi Electronics SATA support"
 131         depends on PCI
 132         help
 133           This option enables support for ULi Electronics SATA.
 134
 135           If unsure, say N.
 136
 137 config SATA_VIA
 138         tristate "VIA SATA support"
 139         depends on PCI
 140         help
 141           This option enables support for VIA Serial ATA.
 142
 143           If unsure, say N.
 144
 145 config SATA_VITESSE
 146         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 147         depends on PCI
 148         help
 149           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 150
 151           If unsure, say N.
 152
 153 config SATA_INIC162X
 154         tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
 155         depends on PCI && EXPERIMENTAL
 156         help
 157           This option enables support for Initio 162x Serial ATA.
 158
 159 config SATA_ACPI
 160         bool
 161         depends on ACPI && PCI
 162         default y
 163         help
 164           This option adds support for SATA-related ACPI objects.
 165           These ACPI objects add the ability to retrieve taskfiles
 166           from the ACPI BIOS and write them to the disk controller.
 167           These objects may be related to performance, security,
 168           power management, or other areas.
 169           You can disable this at kernel boot time by using the
 170           option libata.noacpi=1
 171
 172 config PATA_ALI
 173         tristate "ALi PATA support (Experimental)"
 174         depends on PCI && EXPERIMENTAL
 175         help
 176           This option enables support for the ALi ATA interfaces
 177           found on the many ALi chipsets.
 178
 179           If unsure, say N.
 180
 181 config PATA_AMD
 182         tristate "AMD/NVidia PATA support"
 183         depends on PCI
 184         help
 185           This option enables support for the AMD and NVidia PATA
 186           interfaces found on the chipsets for Athlon/Athlon64.
 187
 188           If unsure, say N.
 189
 190 config PATA_ARTOP
 191         tristate "ARTOP 6210/6260 PATA support (Experimental)"
 192         depends on PCI && EXPERIMENTAL
 193         help
 194           This option enables support for ARTOP PATA controllers.
 195
 196           If unsure, say N.
 197
 198 config PATA_ATIIXP
 199         tristate "ATI PATA support (Experimental)"
 200         depends on PCI && EXPERIMENTAL
 201         help
 202           This option enables support for the ATI ATA interfaces
 203           found on the many ATI chipsets.
 204
 205           If unsure, say N.
 206
 207 config PATA_CMD640_PCI
 208         tristate "CMD640 PCI PATA support (Very Experimental)"
 209         depends on PCI && EXPERIMENTAL
 210         help
 211           This option enables support for the CMD640 PCI IDE
 212           interface chip. Only the primary channel is currently
 213           supported.
 214
 215           If unsure, say N.
 216
 217 config PATA_CMD64X
 218         tristate "CMD64x PATA support (Very Experimental)"
 219         depends on PCI&& EXPERIMENTAL
 220         help
 221           This option enables support for the CMD64x series chips
 222           except for the CMD640.
 223
 224           If unsure, say N.
 225
 226 config PATA_CS5520
 227         tristate "CS5510/5520 PATA support"
 228         depends on PCI
 229         help
 230           This option enables support for the Cyrix 5510/5520
 231           companion chip used with the MediaGX/Geode processor family.
 232
 233           If unsure, say N.
 234
 235 config PATA_CS5530
 236         tristate "CS5530 PATA support (Experimental)"
 237         depends on PCI && EXPERIMENTAL
 238         help
 239           This option enables support for the Cyrix/NatSemi/AMD CS5530
 240           companion chip used with the MediaGX/Geode processor family.
 241
 242           If unsure, say N.
 243
 244 config PATA_CS5535
 245         tristate "CS5535 PATA support (Experimental)"
 246         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 247         help
 248           This option enables support for the NatSemi/AMD CS5535
 249           companion chip used with the Geode processor family.
 250
 251           If unsure, say N.
 252
 253 config PATA_CYPRESS
 254         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 255         depends on PCI && EXPERIMENTAL
 256         help
 257           This option enables support for the Cypress/Contaq CY82C693
 258           chipset found in some Alpha systems
 259
 260           If unsure, say N.
 261
 262 config PATA_EFAR
 263         tristate "EFAR SLC90E66 support"
 264         depends on PCI
 265         help
 266           This option enables support for the EFAR SLC90E66
 267           IDE controller found on some older machines.
 268
 269           If unsure, say N.
 270
 271 config ATA_GENERIC
 272         tristate "Generic ATA support"
 273         depends on PCI
 274         help
 275           This option enables support for generic BIOS configured
 276           ATA controllers via the new ATA layer
 277
 278           If unsure, say N.
 279
 280 config PATA_HPT366
 281         tristate "HPT 366/368 PATA support (Experimental)"
 282         depends on PCI && EXPERIMENTAL
 283         help
 284           This option enables support for the HPT 366 and 368
 285           PATA controllers via the new ATA layer.
 286
 287           If unsure, say N.
 288
 289 config PATA_HPT37X
 290         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 291         depends on PCI && EXPERIMENTAL
 292         help
 293           This option enables support for the majority of the later HPT
 294           PATA controllers via the new ATA layer.
 295
 296           If unsure, say N.
 297
 298 config PATA_HPT3X2N
 299         tristate "HPT 372N/302N PATA support (Very Experimental)"
 300         depends on PCI && EXPERIMENTAL
 301         help
 302           This option enables support for the N variant HPT PATA
 303           controllers via the new ATA layer
 304
 305           If unsure, say N.
 306
 307 config PATA_HPT3X3
 308         tristate "HPT 343/363 PATA support (Experimental)"
 309         depends on PCI
 310         help
 311           This option enables support for the HPT 343/363
 312           PATA controllers via the new ATA layer
 313
 314           If unsure, say N.
 315
 316 config PATA_ISAPNP
 317         tristate "ISA Plug and Play PATA support (Experimental)"
 318         depends on EXPERIMENTAL && ISAPNP
 319         help
 320           This option enables support for ISA plug & play ATA
 321           controllers such as those found on old soundcards.
 322
 323           If unsure, say N.
 324
 325 config PATA_IT821X
 326         tristate "IT8211/2 PATA support"
 327         depends on PCI
 328         help
 329           This option enables support for the ITE 8211 and 8212
 330           PATA controllers via the new ATA layer, including RAID
 331           mode.
 332
 333           If unsure, say N.
 334
 335 config PATA_IT8213
 336         tristate "IT8213 PATA support (Experimental)"
 337         depends on PCI && EXPERIMENTAL
 338         help
 339           This option enables support for the ITE 821 PATA
 340           controllers via the new ATA layer.
 341
 342           If unsure, say N.
 343
 344 config PATA_JMICRON
 345         tristate "JMicron PATA support"
 346         depends on PCI
 347         help
 348           Enable support for the JMicron IDE controller, via the new
 349           ATA layer.
 350
 351           If unsure, say N.
 352
 353 config PATA_LEGACY
 354         tristate "Legacy ISA PATA support (Experimental)"
 355         depends on ISA && EXPERIMENTAL
 356         help
 357           This option enables support for ISA/VLB bus legacy PATA
 358           ports and allows them to be accessed via the new ATA layer.
 359
 360           If unsure, say N.
 361
 362 config PATA_TRIFLEX
 363         tristate "Compaq Triflex PATA support"
 364         depends on PCI
 365         help
 366           Enable support for the Compaq 'Triflex' IDE controller as found
 367           on many Compaq Pentium-Pro systems, via the new ATA layer.
 368
 369           If unsure, say N.
 370
 371 config PATA_MARVELL
 372         tristate "Marvell PATA support via legacy mode"
 373         depends on PCI
 374         help
 375           This option enables limited support for the Marvell 88SE6145 ATA
 376           controller.
 377
 378           If unsure, say N.
 379
 380 config PATA_MPC52xx
 381         tristate "Freescale MPC52xx SoC internal IDE"
 382         depends on PPC_MPC52xx
 383         help
 384           This option enables support for integrated IDE controller
 385           of the Freescale MPC52xx SoC.
 386
 387           If unsure, say N.
 388
 389 config PATA_MPIIX
 390         tristate "Intel PATA MPIIX support"
 391         depends on PCI
 392         help
 393           This option enables support for MPIIX PATA support.
 394
 395           If unsure, say N.
 396
 397 config PATA_OLDPIIX
 398         tristate "Intel PATA old PIIX support"
 399         depends on PCI
 400         help
 401           This option enables support for early PIIX PATA support.
 402
 403           If unsure, say N.
 404
 405 config PATA_NETCELL
 406         tristate "NETCELL Revolution RAID support"
 407         depends on PCI
 408         help
 409           This option enables support for the Netcell Revolution RAID
 410           PATA controller.
 411
 412           If unsure, say N.
 413
 414 config PATA_NS87410
 415         tristate "Nat Semi NS87410 PATA support (Experimental)"
 416         depends on PCI && EXPERIMENTAL
 417         help
 418           This option enables support for the National Semiconductor
 419           NS87410 PCI-IDE controller.
 420
 421           If unsure, say N.
 422
 423 config PATA_OPTI
 424         tristate "OPTI621/6215 PATA support (Very Experimental)"
 425         depends on PCI && EXPERIMENTAL
 426         help
 427           This option enables full PIO support for the early Opti ATA
 428           controllers found on some old motherboards.
 429
 430           If unsure, say N.
 431
 432 config PATA_OPTIDMA
 433         tristate "OPTI FireStar PATA support (Very Experimental)"
 434         depends on PCI && EXPERIMENTAL
 435         help
 436           This option enables DMA/PIO support for the later OPTi
 437           controllers found on some old motherboards and in some
 438           laptops.
 439
 440           If unsure, say N.
 441
 442 config PATA_PCMCIA
 443         tristate "PCMCIA PATA support"
 444         depends on PCMCIA
 445         help
 446           This option enables support for PCMCIA ATA interfaces, including
 447           compact flash card adapters via the new ATA layer.
 448
 449           If unsure, say N.
 450
 451 config PATA_PDC_OLD
 452         tristate "Older Promise PATA controller support (Experimental)"
 453         depends on PCI && EXPERIMENTAL
 454         help
 455           This option enables support for the Promise 20246, 20262, 20263,
 456           20265 and 20267 adapters.
 457
 458           If unsure, say N.
 459
 460 config PATA_QDI
 461         tristate "QDI VLB PATA support"
 462         depends on ISA
 463         help
 464           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 465
 466 config PATA_RADISYS
 467         tristate "RADISYS 82600 PATA support (Very Experimental)"
 468         depends on PCI && EXPERIMENTAL
 469         help
 470           This option enables support for the RADISYS 82600
 471           PATA controllers via the new ATA layer
 472
 473           If unsure, say N.
 474
 475 config PATA_RZ1000
 476         tristate "PC Tech RZ1000 PATA support"
 477         depends on PCI
 478         help
 479           This option enables basic support for the PC Tech RZ1000/1
 480           PATA controllers via the new ATA layer
 481
 482           If unsure, say N.
 483
 484 config PATA_SC1200
 485         tristate "SC1200 PATA support (Very Experimental)"
 486         depends on PCI && EXPERIMENTAL
 487         help
 488           This option enables support for the NatSemi/AMD SC1200 SoC
 489           companion chip used with the Geode processor family.
 490
 491           If unsure, say N.
 492
 493 config PATA_SERVERWORKS
 494         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 495         depends on PCI
 496         help
 497           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 498           HT1000 PATA controllers, via the new ATA layer.
 499
 500           If unsure, say N.
 501
 502 config PATA_PDC2027X
 503         tristate "Promise PATA 2027x support"
 504         depends on PCI
 505         help
 506           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 507
 508           If unsure, say N.
 509
 510 config PATA_SIL680
 511         tristate "CMD / Silicon Image 680 PATA support"
 512         depends on PCI
 513         help
 514           This option enables support for CMD / Silicon Image 680 PATA.
 515
 516           If unsure, say N.
 517
 518 config PATA_SIS
 519         tristate "SiS PATA support (Experimental)"
 520         depends on PCI && EXPERIMENTAL
 521         help
 522           This option enables support for SiS PATA controllers
 523
 524           If unsure, say N.
 525
 526 config PATA_VIA
 527         tristate "VIA PATA support"
 528         depends on PCI
 529         help
 530           This option enables support for the VIA PATA interfaces
 531           found on the many VIA chipsets.
 532
 533           If unsure, say N.
 534
 535 config PATA_WINBOND
 536         tristate "Winbond SL82C105 PATA support"
 537         depends on PCI
 538         help
 539           This option enables support for SL82C105 PATA devices found in the
 540           Netwinder and some other systems
 541
 542           If unsure, say N.
 543
 544 config PATA_WINBOND_VLB
 545         tristate "Winbond W83759A VLB PATA support (Experimental)"
 546         depends on ISA && EXPERIMENTAL
 547         help
 548           Support for the Winbond W83759A controller on Vesa Local Bus
 549           systems.
 550
 551 config PATA_PLATFORM
 552         tristate "Generic platform device PATA support"
 553         depends on EMBEDDED || ARCH_RPC
 554         help
 555           This option enables support for generic directly connected ATA
 556           devices commonly found on embedded systems.
 557
 558           If unsure, say N.
 559
 560 config PATA_ICSIDE
 561         tristate "Acorn ICS PATA support"
 562         depends on ARM && ARCH_ACORN
 563         help
 564           On Acorn systems, say Y here if you wish to use the ICS PATA
 565           interface card.  This is not required for ICS partition support.
 566           If you are unsure, say N to this.
 567
 568 config PATA_IXP4XX_CF
 569         tristate "IXP4XX Compact Flash support"
 570         depends on ARCH_IXP4XX
 571         help
 572           This option enables support for a Compact Flash connected on
 573           the ixp4xx expansion bus. This driver had been written for
 574           Loft/Avila boards in mind but can work with others.
 575
 576           If unsure, say N.
 577
 578 config PATA_SCC
 579         tristate "Toshiba's Cell Reference Set IDE support"
 580         depends on PCI && PPC_CELLEB
 581         help
 582           This option enables support for the built-in IDE controller on
 583           Toshiba Cell Reference Board.
 584
 585           If unsure, say N.
 586
 587 endif
 588 endmenu
 589