drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         depends on !SUN4 || BROKEN
  11         select SCSI
  12         ---help---
  13           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  14           any other ATA device under Linux, say Y and make sure that you know
  15           the name of your ATA host adapter (the card inside your computer
  16           that "speaks" the ATA protocol, also called ATA controller),
  17           because you will be asked for it.
  18
  19           NOTE: ATA enables basic SCSI support; *however*,
  20           'SCSI disk support', 'SCSI tape support', or
  21           'SCSI CDROM support' may also be needed,
  22           depending on your hardware configuration.
  23
  24 if ATA
  25
  26 config ATA_NONSTANDARD
  27        bool
  28        default n
  29
  30 config ATA_ACPI
  31         bool
  32         depends on ACPI && PCI
  33         default y
  34         help
  35           This option adds support for ATA-related ACPI objects.
  36           These ACPI objects add the ability to retrieve taskfiles
  37           from the ACPI BIOS and write them to the disk controller.
  38           These objects may be related to performance, security,
  39           power management, or other areas.
  40           You can disable this at kernel boot time by using the
  41           option libata.noacpi=1
  42
  43 config SATA_AHCI
  44         tristate "AHCI SATA support"
  45         depends on PCI
  46         help
  47           This option enables support for AHCI Serial ATA.
  48
  49           If unsure, say N.
  50
  51 config SATA_SVW
  52         tristate "ServerWorks Frodo / Apple K2 SATA support"
  53         depends on PCI
  54         help
  55           This option enables support for Broadcom/Serverworks/Apple K2
  56           SATA support.
  57
  58           If unsure, say N.
  59
  60 config ATA_PIIX
  61         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
  62         depends on PCI
  63         help
  64           This option enables support for ICH5/6/7/8 Serial ATA
  65           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  66           host controllers.
  67
  68           If unsure, say N.
  69
  70 config SATA_MV
  71         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
  72         depends on EXPERIMENTAL
  73         help
  74           This option enables support for the Marvell Serial ATA family.
  75           Currently supports 88SX[56]0[48][01] chips.
  76
  77           If unsure, say N.
  78
  79 config SATA_NV
  80         tristate "NVIDIA SATA support"
  81         depends on PCI
  82         help
  83           This option enables support for NVIDIA Serial ATA.
  84
  85           If unsure, say N.
  86
  87 config PDC_ADMA
  88         tristate "Pacific Digital ADMA support"
  89         depends on PCI
  90         help
  91           This option enables support for Pacific Digital ADMA controllers
  92
  93           If unsure, say N.
  94
  95 config SATA_QSTOR
  96         tristate "Pacific Digital SATA QStor support"
  97         depends on PCI
  98         help
  99           This option enables support for Pacific Digital Serial ATA QStor.
 100
 101           If unsure, say N.
 102
 103 config SATA_PROMISE
 104         tristate "Promise SATA TX2/TX4 support"
 105         depends on PCI
 106         help
 107           This option enables support for Promise Serial ATA TX2/TX4.
 108
 109           If unsure, say N.
 110
 111 config SATA_SX4
 112         tristate "Promise SATA SX4 support"
 113         depends on PCI && EXPERIMENTAL
 114         help
 115           This option enables support for Promise Serial ATA SX4.
 116
 117           If unsure, say N.
 118
 119 config SATA_SIL
 120         tristate "Silicon Image SATA support"
 121         depends on PCI
 122         help
 123           This option enables support for Silicon Image Serial ATA.
 124
 125           If unsure, say N.
 126
 127 config SATA_SIL24
 128         tristate "Silicon Image 3124/3132 SATA support"
 129         depends on PCI
 130         help
 131           This option enables support for Silicon Image 3124/3132 Serial ATA.
 132
 133           If unsure, say N.
 134
 135 config SATA_SIS
 136         tristate "SiS 964/965/966/180 SATA support"
 137         depends on PCI
 138         select PATA_SIS
 139         help
 140           This option enables support for SiS Serial ATA on
 141           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 142           The PATA support for SiS 180 requires additionally to
 143           enable the PATA_SIS driver in the config.
 144           If unsure, say N.
 145
 146 config SATA_ULI
 147         tristate "ULi Electronics SATA support"
 148         depends on PCI
 149         help
 150           This option enables support for ULi Electronics SATA.
 151
 152           If unsure, say N.
 153
 154 config SATA_VIA
 155         tristate "VIA SATA support"
 156         depends on PCI
 157         help
 158           This option enables support for VIA Serial ATA.
 159
 160           If unsure, say N.
 161
 162 config SATA_VITESSE
 163         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 164         depends on PCI
 165         help
 166           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 167
 168           If unsure, say N.
 169
 170 config SATA_INIC162X
 171         tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
 172         depends on PCI && EXPERIMENTAL
 173         help
 174           This option enables support for Initio 162x Serial ATA.
 175
 176 config PATA_ACPI
 177         tristate "ACPI firmware driver for PATA"
 178         depends on ATA_ACPI
 179         help
 180           This option enables an ACPI method driver which drives
 181           motherboard PATA controller interfaces through the ACPI
 182           firmware in the BIOS. This driver can sometimes handle
 183           otherwise unsupported hardware.
 184
 185 config SATA_FSL
 186         tristate "Freescale 3.0Gbps SATA support"
 187         depends on FSL_SOC
 188         help
 189           This option enables support for Freescale 3.0Gbps SATA controller.
 190           It can be found on MPC837x and MPC8315.
 191
 192           If unsure, say N.
 193
 194 config PATA_ALI
 195         tristate "ALi PATA support (Experimental)"
 196         depends on PCI && EXPERIMENTAL
 197         help
 198           This option enables support for the ALi ATA interfaces
 199           found on the many ALi chipsets.
 200
 201           If unsure, say N.
 202
 203 config PATA_AMD
 204         tristate "AMD/NVidia PATA support"
 205         depends on PCI
 206         help
 207           This option enables support for the AMD and NVidia PATA
 208           interfaces found on the chipsets for Athlon/Athlon64.
 209
 210           If unsure, say N.
 211
 212 config PATA_ARTOP
 213         tristate "ARTOP 6210/6260 PATA support"
 214         depends on PCI
 215         help
 216           This option enables support for ARTOP PATA controllers.
 217
 218           If unsure, say N.
 219
 220 config PATA_AT32
 221         tristate "Atmel AVR32 PATA support (Experimental)"
 222         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 223         help
 224           This option enables support for the IDE devices on the
 225           Atmel AT32AP platform.
 226
 227           If unsure, say N.
 228
 229 config PATA_ATIIXP
 230         tristate "ATI PATA support"
 231         depends on PCI
 232         help
 233           This option enables support for the ATI ATA interfaces
 234           found on the many ATI chipsets.
 235
 236           If unsure, say N.
 237
 238 config PATA_CMD640_PCI
 239         tristate "CMD640 PCI PATA support (Very Experimental)"
 240         depends on PCI && EXPERIMENTAL
 241         help
 242           This option enables support for the CMD640 PCI IDE
 243           interface chip. Only the primary channel is currently
 244           supported.
 245
 246           If unsure, say N.
 247
 248 config PATA_CMD64X
 249         tristate "CMD64x PATA support"
 250         depends on PCI
 251         help
 252           This option enables support for the CMD64x series chips
 253           except for the CMD640.
 254
 255           If unsure, say N.
 256
 257 config PATA_CS5520
 258         tristate "CS5510/5520 PATA support"
 259         depends on PCI
 260         help
 261           This option enables support for the Cyrix 5510/5520
 262           companion chip used with the MediaGX/Geode processor family.
 263
 264           If unsure, say N.
 265
 266 config PATA_CS5530
 267         tristate "CS5530 PATA support (Experimental)"
 268         depends on PCI && EXPERIMENTAL
 269         help
 270           This option enables support for the Cyrix/NatSemi/AMD CS5530
 271           companion chip used with the MediaGX/Geode processor family.
 272
 273           If unsure, say N.
 274
 275 config PATA_CS5535
 276         tristate "CS5535 PATA support (Experimental)"
 277         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 278         help
 279           This option enables support for the NatSemi/AMD CS5535
 280           companion chip used with the Geode processor family.
 281
 282           If unsure, say N.
 283
 284 config PATA_CS5536
 285         tristate "CS5536 PATA support (Experimental)"
 286         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 287         help
 288           This option enables support for the AMD CS5536
 289           companion chip used with the Geode LX processor family.
 290
 291           If unsure, say N.
 292
 293 config PATA_CYPRESS
 294         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 295         depends on PCI && EXPERIMENTAL
 296         help
 297           This option enables support for the Cypress/Contaq CY82C693
 298           chipset found in some Alpha systems
 299
 300           If unsure, say N.
 301
 302 config PATA_EFAR
 303         tristate "EFAR SLC90E66 support"
 304         depends on PCI
 305         help
 306           This option enables support for the EFAR SLC90E66
 307           IDE controller found on some older machines.
 308
 309           If unsure, say N.
 310
 311 config ATA_GENERIC
 312         tristate "Generic ATA support"
 313         depends on PCI
 314         help
 315           This option enables support for generic BIOS configured
 316           ATA controllers via the new ATA layer
 317
 318           If unsure, say N.
 319
 320 config PATA_HPT366
 321         tristate "HPT 366/368 PATA support"
 322         depends on PCI
 323         help
 324           This option enables support for the HPT 366 and 368
 325           PATA controllers via the new ATA layer.
 326
 327           If unsure, say N.
 328
 329 config PATA_HPT37X
 330         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 331         depends on PCI && EXPERIMENTAL
 332         help
 333           This option enables support for the majority of the later HPT
 334           PATA controllers via the new ATA layer.
 335
 336           If unsure, say N.
 337
 338 config PATA_HPT3X2N
 339         tristate "HPT 372N/302N PATA support (Very Experimental)"
 340         depends on PCI && EXPERIMENTAL
 341         help
 342           This option enables support for the N variant HPT PATA
 343           controllers via the new ATA layer
 344
 345           If unsure, say N.
 346
 347 config PATA_HPT3X3
 348         tristate "HPT 343/363 PATA support"
 349         depends on PCI
 350         help
 351           This option enables support for the HPT 343/363
 352           PATA controllers via the new ATA layer
 353
 354           If unsure, say N.
 355
 356 config PATA_HPT3X3_DMA
 357         bool "HPT 343/363 DMA support (Experimental)"
 358         depends on PATA_HPT3X3
 359         help
 360           This option enables DMA support for the HPT343/363
 361           controllers. Enable with care as there are still some
 362           problems with DMA on this chipset.
 363
 364 config PATA_ISAPNP
 365         tristate "ISA Plug and Play PATA support (Experimental)"
 366         depends on EXPERIMENTAL && ISAPNP
 367         help
 368           This option enables support for ISA plug & play ATA
 369           controllers such as those found on old soundcards.
 370
 371           If unsure, say N.
 372
 373 config PATA_IT821X
 374         tristate "IT8211/2 PATA support"
 375         depends on PCI
 376         help
 377           This option enables support for the ITE 8211 and 8212
 378           PATA controllers via the new ATA layer, including RAID
 379           mode.
 380
 381           If unsure, say N.
 382
 383 config PATA_IT8213
 384         tristate "IT8213 PATA support (Experimental)"
 385         depends on PCI && EXPERIMENTAL
 386         help
 387           This option enables support for the ITE 821 PATA
 388           controllers via the new ATA layer.
 389
 390           If unsure, say N.
 391
 392 config PATA_JMICRON
 393         tristate "JMicron PATA support"
 394         depends on PCI
 395         help
 396           Enable support for the JMicron IDE controller, via the new
 397           ATA layer.
 398
 399           If unsure, say N.
 400
 401 config PATA_LEGACY
 402         tristate "Legacy ISA PATA support (Experimental)"
 403         depends on ISA && EXPERIMENTAL
 404         help
 405           This option enables support for ISA/VLB bus legacy PATA
 406           ports and allows them to be accessed via the new ATA layer.
 407
 408           If unsure, say N.
 409
 410 config PATA_TRIFLEX
 411         tristate "Compaq Triflex PATA support"
 412         depends on PCI
 413         help
 414           Enable support for the Compaq 'Triflex' IDE controller as found
 415           on many Compaq Pentium-Pro systems, via the new ATA layer.
 416
 417           If unsure, say N.
 418
 419 config PATA_MARVELL
 420         tristate "Marvell PATA support via legacy mode"
 421         depends on PCI
 422         help
 423           This option enables limited support for the Marvell 88SE6145 ATA
 424           controller.
 425
 426           If unsure, say N.
 427
 428 config PATA_MPC52xx
 429         tristate "Freescale MPC52xx SoC internal IDE"
 430         depends on PPC_MPC52xx
 431         help
 432           This option enables support for integrated IDE controller
 433           of the Freescale MPC52xx SoC.
 434
 435           If unsure, say N.
 436
 437 config PATA_MPIIX
 438         tristate "Intel PATA MPIIX support"
 439         depends on PCI
 440         help
 441           This option enables support for MPIIX PATA support.
 442
 443           If unsure, say N.
 444
 445 config PATA_OLDPIIX
 446         tristate "Intel PATA old PIIX support"
 447         depends on PCI
 448         help
 449           This option enables support for early PIIX PATA support.
 450
 451           If unsure, say N.
 452
 453 config PATA_NETCELL
 454         tristate "NETCELL Revolution RAID support"
 455         depends on PCI
 456         help
 457           This option enables support for the Netcell Revolution RAID
 458           PATA controller.
 459
 460           If unsure, say N.
 461
 462 config PATA_NINJA32
 463         tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
 464         depends on PCI && EXPERIMENTAL
 465         help
 466           This option enables support for the Ninja32, Delkin and
 467           possibly other brands of Cardbus ATA adapter
 468
 469           If unsure, say N.
 470
 471 config PATA_NS87410
 472         tristate "Nat Semi NS87410 PATA support (Experimental)"
 473         depends on PCI && EXPERIMENTAL
 474         help
 475           This option enables support for the National Semiconductor
 476           NS87410 PCI-IDE controller.
 477
 478           If unsure, say N.
 479
 480 config PATA_NS87415
 481         tristate "Nat Semi NS87415 PATA support (Experimental)"
 482         depends on PCI && EXPERIMENTAL
 483         help
 484           This option enables support for the National Semiconductor
 485           NS87415 PCI-IDE controller.
 486
 487           If unsure, say N.
 488
 489 config PATA_OPTI
 490         tristate "OPTI621/6215 PATA support (Very Experimental)"
 491         depends on PCI && EXPERIMENTAL
 492         help
 493           This option enables full PIO support for the early Opti ATA
 494           controllers found on some old motherboards.
 495
 496           If unsure, say N.
 497
 498 config PATA_OPTIDMA
 499         tristate "OPTI FireStar PATA support (Very Experimental)"
 500         depends on PCI && EXPERIMENTAL
 501         help
 502           This option enables DMA/PIO support for the later OPTi
 503           controllers found on some old motherboards and in some
 504           laptops.
 505
 506           If unsure, say N.
 507
 508 config PATA_PCMCIA
 509         tristate "PCMCIA PATA support"
 510         depends on PCMCIA
 511         help
 512           This option enables support for PCMCIA ATA interfaces, including
 513           compact flash card adapters via the new ATA layer.
 514
 515           If unsure, say N.
 516
 517 config PATA_PDC_OLD
 518         tristate "Older Promise PATA controller support (Experimental)"
 519         depends on PCI && EXPERIMENTAL
 520         help
 521           This option enables support for the Promise 20246, 20262, 20263,
 522           20265 and 20267 adapters.
 523
 524           If unsure, say N.
 525
 526 config PATA_QDI
 527         tristate "QDI VLB PATA support"
 528         depends on ISA
 529         help
 530           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 531
 532 config PATA_RADISYS
 533         tristate "RADISYS 82600 PATA support (Very Experimental)"
 534         depends on PCI && EXPERIMENTAL
 535         help
 536           This option enables support for the RADISYS 82600
 537           PATA controllers via the new ATA layer
 538
 539           If unsure, say N.
 540
 541 config PATA_RB500
 542         tristate "RouterBoard 500 PATA CompactFlash support"
 543         depends on MIKROTIK_RB500
 544         help
 545           This option enables support for the RouterBoard 500
 546           PATA CompactFlash controller.
 547
 548           If unsure, say N.
 549
 550 config PATA_RZ1000
 551         tristate "PC Tech RZ1000 PATA support"
 552         depends on PCI
 553         help
 554           This option enables basic support for the PC Tech RZ1000/1
 555           PATA controllers via the new ATA layer
 556
 557           If unsure, say N.
 558
 559 config PATA_SC1200
 560         tristate "SC1200 PATA support (Very Experimental)"
 561         depends on PCI && EXPERIMENTAL
 562         help
 563           This option enables support for the NatSemi/AMD SC1200 SoC
 564           companion chip used with the Geode processor family.
 565
 566           If unsure, say N.
 567
 568 config PATA_SERVERWORKS
 569         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 570         depends on PCI
 571         help
 572           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 573           HT1000 PATA controllers, via the new ATA layer.
 574
 575           If unsure, say N.
 576
 577 config PATA_PDC2027X
 578         tristate "Promise PATA 2027x support"
 579         depends on PCI
 580         help
 581           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 582
 583           If unsure, say N.
 584
 585 config PATA_SIL680
 586         tristate "CMD / Silicon Image 680 PATA support"
 587         depends on PCI
 588         help
 589           This option enables support for CMD / Silicon Image 680 PATA.
 590
 591           If unsure, say N.
 592
 593 config PATA_SIS
 594         tristate "SiS PATA support (Experimental)"
 595         depends on PCI && EXPERIMENTAL
 596         help
 597           This option enables support for SiS PATA controllers
 598
 599           If unsure, say N.
 600
 601 config PATA_VIA
 602         tristate "VIA PATA support"
 603         depends on PCI
 604         help
 605           This option enables support for the VIA PATA interfaces
 606           found on the many VIA chipsets.
 607
 608           If unsure, say N.
 609
 610 config PATA_WINBOND
 611         tristate "Winbond SL82C105 PATA support"
 612         depends on PCI
 613         help
 614           This option enables support for SL82C105 PATA devices found in the
 615           Netwinder and some other systems
 616
 617           If unsure, say N.
 618
 619 config PATA_WINBOND_VLB
 620         tristate "Winbond W83759A VLB PATA support (Experimental)"
 621         depends on ISA && EXPERIMENTAL
 622         help
 623           Support for the Winbond W83759A controller on Vesa Local Bus
 624           systems.
 625
 626 config PATA_PLATFORM
 627         tristate "Generic platform device PATA support"
 628         depends on EMBEDDED || ARCH_RPC || PPC
 629         help
 630           This option enables support for generic directly connected ATA
 631           devices commonly found on embedded systems.
 632
 633           If unsure, say N.
 634
 635 config PATA_OF_PLATFORM
 636         tristate "OpenFirmware platform device PATA support"
 637         depends on PATA_PLATFORM && PPC_OF
 638         help
 639           This option enables support for generic directly connected ATA
 640           devices commonly found on embedded systems with OpenFirmware
 641           bindings.
 642
 643           If unsure, say N.
 644
 645 config PATA_ICSIDE
 646         tristate "Acorn ICS PATA support"
 647         depends on ARM && ARCH_ACORN
 648         help
 649           On Acorn systems, say Y here if you wish to use the ICS PATA
 650           interface card.  This is not required for ICS partition support.
 651           If you are unsure, say N to this.
 652
 653 config PATA_IXP4XX_CF
 654         tristate "IXP4XX Compact Flash support"
 655         depends on ARCH_IXP4XX
 656         help
 657           This option enables support for a Compact Flash connected on
 658           the ixp4xx expansion bus. This driver had been written for
 659           Loft/Avila boards in mind but can work with others.
 660
 661           If unsure, say N.
 662
 663 config PATA_SCC
 664         tristate "Toshiba's Cell Reference Set IDE support"
 665         depends on PCI && PPC_CELLEB
 666         help
 667           This option enables support for the built-in IDE controller on
 668           Toshiba Cell Reference Board.
 669
 670           If unsure, say N.
 671
 672 config PATA_BF54X
 673         tristate "Blackfin 54x ATAPI support"
 674         depends on BF542 || BF548 || BF549
 675         help
 676           This option enables support for the built-in ATAPI controller on
 677           Blackfin 54x family chips.
 678
 679           If unsure, say N.
 680
 681 endif # ATA