drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI && PCI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_DA850
 102         tristate "DaVinci DA850 AHCI SATA support"
 103         depends on ARCH_DAVINCI_DA850
 104         help
 105           This option enables support for the DaVinci DA850 SoC's
 106           onboard AHCI SATA.
 107
 108           If unsure, say N.
 109
 110 config AHCI_ST
 111         tristate "ST AHCI SATA support"
 112         depends on ARCH_STI
 113         help
 114           This option enables support for ST AHCI SATA controller.
 115
 116           If unsure, say N.
 117
 118 config AHCI_IMX
 119         tristate "Freescale i.MX AHCI SATA support"
 120         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 121         help
 122           This option enables support for the Freescale i.MX SoC's
 123           onboard AHCI SATA.
 124
 125           If unsure, say N.
 126
 127 config AHCI_MVEBU
 128         tristate "Marvell EBU AHCI SATA support"
 129         depends on ARCH_MVEBU
 130         help
 131           This option enables support for the Marvebu EBU SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_SUNXI
 137         tristate "Allwinner sunxi AHCI SATA support"
 138         depends on ARCH_SUNXI
 139         help
 140           This option enables support for the Allwinner sunxi SoC's
 141           onboard AHCI SATA.
 142
 143           If unsure, say N.
 144
 145 config AHCI_TEGRA
 146         tristate "NVIDIA Tegra124 AHCI SATA support"
 147         depends on ARCH_TEGRA
 148         help
 149           This option enables support for the NVIDIA Tegra124 SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_XGENE
 155         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 156         depends on PHY_XGENE
 157         help
 158          This option enables support for APM X-Gene SoC SATA host controller.
 159
 160 config SATA_FSL
 161         tristate "Freescale 3.0Gbps SATA support"
 162         depends on FSL_SOC
 163         help
 164           This option enables support for Freescale 3.0Gbps SATA controller.
 165           It can be found on MPC837x and MPC8315.
 166
 167           If unsure, say N.
 168
 169 config SATA_INIC162X
 170         tristate "Initio 162x SATA support (Very Experimental)"
 171         depends on PCI
 172         help
 173           This option enables support for Initio 162x Serial ATA.
 174
 175 config SATA_ACARD_AHCI
 176         tristate "ACard AHCI variant (ATP 8620)"
 177         depends on PCI
 178         help
 179           This option enables support for Acard.
 180
 181           If unsure, say N.
 182
 183 config SATA_SIL24
 184         tristate "Silicon Image 3124/3132 SATA support"
 185         depends on PCI
 186         help
 187           This option enables support for Silicon Image 3124/3132 Serial ATA.
 188
 189           If unsure, say N.
 190
 191 config ATA_SFF
 192         bool "ATA SFF support (for legacy IDE and PATA)"
 193         default y
 194         help
 195           This option adds support for ATA controllers with SFF
 196           compliant or similar programming interface.
 197
 198           SFF is the legacy IDE interface that has been around since
 199           the dawn of time.  Almost all PATA controllers have an
 200           SFF interface.  Many SATA controllers have an SFF interface
 201           when configured into a legacy compatibility mode.
 202
 203           For users with exclusively modern controllers like AHCI,
 204           Silicon Image 3124, or Marvell 6440, you may choose to
 205           disable this unneeded SFF support.
 206
 207           If unsure, say Y.
 208
 209 if ATA_SFF
 210
 211 comment "SFF controllers with custom DMA interface"
 212
 213 config PDC_ADMA
 214         tristate "Pacific Digital ADMA support"
 215         depends on PCI
 216         help
 217           This option enables support for Pacific Digital ADMA controllers
 218
 219           If unsure, say N.
 220
 221 config PATA_OCTEON_CF
 222         tristate "OCTEON Boot Bus Compact Flash support"
 223         depends on CAVIUM_OCTEON_SOC
 224         help
 225           This option enables a polled compact flash driver for use with
 226           compact flash cards attached to the OCTEON boot bus.
 227
 228           If unsure, say N.
 229
 230 config SATA_QSTOR
 231         tristate "Pacific Digital SATA QStor support"
 232         depends on PCI
 233         help
 234           This option enables support for Pacific Digital Serial ATA QStor.
 235
 236           If unsure, say N.
 237
 238 config SATA_SX4
 239         tristate "Promise SATA SX4 support (Experimental)"
 240         depends on PCI
 241         help
 242           This option enables support for Promise Serial ATA SX4.
 243
 244           If unsure, say N.
 245
 246 config ATA_BMDMA
 247         bool "ATA BMDMA support"
 248         default y
 249         help
 250           This option adds support for SFF ATA controllers with BMDMA
 251           capability.  BMDMA stands for bus-master DMA and is the
 252           de facto DMA interface for SFF controllers.
 253
 254           If unsure, say Y.
 255
 256 if ATA_BMDMA
 257
 258 comment "SATA SFF controllers with BMDMA"
 259
 260 config ATA_PIIX
 261         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 262         depends on PCI
 263         help
 264           This option enables support for ICH5/6/7/8 Serial ATA
 265           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 266           host controllers.
 267
 268           If unsure, say N.
 269
 270 config SATA_DWC
 271         tristate "DesignWare Cores SATA support"
 272         depends on 460EX
 273         select DW_DMAC
 274         help
 275           This option enables support for the on-chip SATA controller of the
 276           AppliedMicro processor 460EX.
 277
 278           If unsure, say N.
 279
 280 config SATA_DWC_DEBUG
 281         bool "Debugging driver version"
 282         depends on SATA_DWC
 283         help
 284           This option enables debugging output in the driver.
 285
 286 config SATA_DWC_VDEBUG
 287         bool "Verbose debug output"
 288         depends on SATA_DWC_DEBUG
 289         help
 290           This option enables the taskfile dumping and NCQ debugging.
 291
 292 config SATA_HIGHBANK
 293         tristate "Calxeda Highbank SATA support"
 294         depends on ARCH_HIGHBANK || COMPILE_TEST
 295         help
 296           This option enables support for the Calxeda Highbank SoC's
 297           onboard SATA.
 298
 299           If unsure, say N.
 300
 301 config SATA_MV
 302         tristate "Marvell SATA support"
 303         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 304                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 305         select GENERIC_PHY
 306         help
 307           This option enables support for the Marvell Serial ATA family.
 308           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 309           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 310
 311           If unsure, say N.
 312
 313 config SATA_NV
 314         tristate "NVIDIA SATA support"
 315         depends on PCI
 316         help
 317           This option enables support for NVIDIA Serial ATA.
 318
 319           If unsure, say N.
 320
 321 config SATA_PROMISE
 322         tristate "Promise SATA TX2/TX4 support"
 323         depends on PCI
 324         help
 325           This option enables support for Promise Serial ATA TX2/TX4.
 326
 327           If unsure, say N.
 328
 329 config SATA_RCAR
 330         tristate "Renesas R-Car SATA support"
 331         depends on ARCH_SHMOBILE || COMPILE_TEST
 332         help
 333           This option enables support for Renesas R-Car Serial ATA.
 334
 335           If unsure, say N.
 336
 337 config SATA_SIL
 338         tristate "Silicon Image SATA support"
 339         depends on PCI
 340         help
 341           This option enables support for Silicon Image Serial ATA.
 342
 343           If unsure, say N.
 344
 345 config SATA_SIS
 346         tristate "SiS 964/965/966/180 SATA support"
 347         depends on PCI
 348         select PATA_SIS
 349         help
 350           This option enables support for SiS Serial ATA on
 351           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 352           The PATA support for SiS 180 requires additionally to
 353           enable the PATA_SIS driver in the config.
 354           If unsure, say N.
 355
 356 config SATA_SVW
 357         tristate "ServerWorks Frodo / Apple K2 SATA support"
 358         depends on PCI
 359         help
 360           This option enables support for Broadcom/Serverworks/Apple K2
 361           SATA support.
 362
 363           If unsure, say N.
 364
 365 config SATA_ULI
 366         tristate "ULi Electronics SATA support"
 367         depends on PCI
 368         help
 369           This option enables support for ULi Electronics SATA.
 370
 371           If unsure, say N.
 372
 373 config SATA_VIA
 374         tristate "VIA SATA support"
 375         depends on PCI
 376         help
 377           This option enables support for VIA Serial ATA.
 378
 379           If unsure, say N.
 380
 381 config SATA_VITESSE
 382         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 383         depends on PCI
 384         help
 385           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 386
 387           If unsure, say N.
 388
 389 comment "PATA SFF controllers with BMDMA"
 390
 391 config PATA_ALI
 392         tristate "ALi PATA support"
 393         depends on PCI
 394         help
 395           This option enables support for the ALi ATA interfaces
 396           found on the many ALi chipsets.
 397
 398           If unsure, say N.
 399
 400 config PATA_AMD
 401         tristate "AMD/NVidia PATA support"
 402         depends on PCI
 403         help
 404           This option enables support for the AMD and NVidia PATA
 405           interfaces found on the chipsets for Athlon/Athlon64.
 406
 407           If unsure, say N.
 408
 409 config PATA_ARASAN_CF
 410         tristate "ARASAN CompactFlash PATA Controller Support"
 411         depends on ARCH_SPEAR13XX || COMPILE_TEST
 412         depends on DMADEVICES
 413         select DMA_ENGINE
 414         help
 415           Say Y here to support the ARASAN CompactFlash PATA controller
 416
 417 config PATA_ARTOP
 418         tristate "ARTOP 6210/6260 PATA support"
 419         depends on PCI
 420         help
 421           This option enables support for ARTOP PATA controllers.
 422
 423           If unsure, say N.
 424
 425 config PATA_ATIIXP
 426         tristate "ATI PATA support"
 427         depends on PCI
 428         help
 429           This option enables support for the ATI ATA interfaces
 430           found on the many ATI chipsets.
 431
 432           If unsure, say N.
 433
 434 config PATA_ATP867X
 435         tristate "ARTOP/Acard ATP867X PATA support"
 436         depends on PCI
 437         help
 438           This option enables support for ARTOP/Acard ATP867X PATA
 439           controllers.
 440
 441           If unsure, say N.
 442
 443 config PATA_BF54X
 444         tristate "Blackfin 54x ATAPI support"
 445         depends on BF542 || BF548 || BF549
 446         help
 447           This option enables support for the built-in ATAPI controller on
 448           Blackfin 54x family chips.
 449
 450           If unsure, say N.
 451
 452 config PATA_CMD64X
 453         tristate "CMD64x PATA support"
 454         depends on PCI
 455         help
 456           This option enables support for the CMD64x series chips
 457           except for the CMD640.
 458
 459           If unsure, say N.
 460
 461 config PATA_CS5520
 462         tristate "CS5510/5520 PATA support"
 463         depends on PCI && (X86_32 || COMPILE_TEST)
 464         help
 465           This option enables support for the Cyrix 5510/5520
 466           companion chip used with the MediaGX/Geode processor family.
 467
 468           If unsure, say N.
 469
 470 config PATA_CS5530
 471         tristate "CS5530 PATA support"
 472         depends on PCI && (X86_32 || COMPILE_TEST)
 473         help
 474           This option enables support for the Cyrix/NatSemi/AMD CS5530
 475           companion chip used with the MediaGX/Geode processor family.
 476
 477           If unsure, say N.
 478
 479 config PATA_CS5535
 480         tristate "CS5535 PATA support (Experimental)"
 481         depends on PCI && X86_32
 482         help
 483           This option enables support for the NatSemi/AMD CS5535
 484           companion chip used with the Geode processor family.
 485
 486           If unsure, say N.
 487
 488 config PATA_CS5536
 489         tristate "CS5536 PATA support"
 490         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 491         help
 492           This option enables support for the AMD CS5536
 493           companion chip used with the Geode LX processor family.
 494
 495           If unsure, say N.
 496
 497 config PATA_CYPRESS
 498         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 499         depends on PCI
 500         help
 501           This option enables support for the Cypress/Contaq CY82C693
 502           chipset found in some Alpha systems
 503
 504           If unsure, say N.
 505
 506 config PATA_EFAR
 507         tristate "EFAR SLC90E66 support"
 508         depends on PCI
 509         help
 510           This option enables support for the EFAR SLC90E66
 511           IDE controller found on some older machines.
 512
 513           If unsure, say N.
 514
 515 config PATA_EP93XX
 516         tristate "Cirrus Logic EP93xx PATA support"
 517         depends on ARCH_EP93XX
 518         help
 519           This option enables support for the PATA controller in
 520           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 521
 522           If unsure, say N.
 523
 524 config PATA_HPT366
 525         tristate "HPT 366/368 PATA support"
 526         depends on PCI
 527         help
 528           This option enables support for the HPT 366 and 368
 529           PATA controllers via the new ATA layer.
 530
 531           If unsure, say N.
 532
 533 config PATA_HPT37X
 534         tristate "HPT 370/370A/371/372/374/302 PATA support"
 535         depends on PCI
 536         help
 537           This option enables support for the majority of the later HPT
 538           PATA controllers via the new ATA layer.
 539
 540           If unsure, say N.
 541
 542 config PATA_HPT3X2N
 543         tristate "HPT 371N/372N/302N PATA support"
 544         depends on PCI
 545         help
 546           This option enables support for the N variant HPT PATA
 547           controllers via the new ATA layer.
 548
 549           If unsure, say N.
 550
 551 config PATA_HPT3X3
 552         tristate "HPT 343/363 PATA support"
 553         depends on PCI
 554         help
 555           This option enables support for the HPT 343/363
 556           PATA controllers via the new ATA layer
 557
 558           If unsure, say N.
 559
 560 config PATA_HPT3X3_DMA
 561         bool "HPT 343/363 DMA support"
 562         depends on PATA_HPT3X3
 563         help
 564           This option enables DMA support for the HPT343/363
 565           controllers. Enable with care as there are still some
 566           problems with DMA on this chipset.
 567
 568 config PATA_ICSIDE
 569         tristate "Acorn ICS PATA support"
 570         depends on ARM && ARCH_ACORN
 571         help
 572           On Acorn systems, say Y here if you wish to use the ICS PATA
 573           interface card.  This is not required for ICS partition support.
 574           If you are unsure, say N to this.
 575
 576 config PATA_IMX
 577         tristate "PATA support for Freescale iMX"
 578         depends on ARCH_MXC
 579         help
 580           This option enables support for the PATA host available on Freescale
 581           iMX SoCs.
 582
 583           If unsure, say N.
 584
 585 config PATA_IT8213
 586         tristate "IT8213 PATA support (Experimental)"
 587         depends on PCI
 588         help
 589           This option enables support for the ITE 821 PATA
 590           controllers via the new ATA layer.
 591
 592           If unsure, say N.
 593
 594 config PATA_IT821X
 595         tristate "IT8211/2 PATA support"
 596         depends on PCI
 597         help
 598           This option enables support for the ITE 8211 and 8212
 599           PATA controllers via the new ATA layer, including RAID
 600           mode.
 601
 602           If unsure, say N.
 603
 604 config PATA_JMICRON
 605         tristate "JMicron PATA support"
 606         depends on PCI
 607         help
 608           Enable support for the JMicron IDE controller, via the new
 609           ATA layer.
 610
 611           If unsure, say N.
 612
 613 config PATA_MACIO
 614         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 615         depends on PPC_PMAC
 616         help
 617           Most IDE capable PowerMacs have IDE busses driven by a variant
 618           of this controller which is part of the Apple chipset used on
 619           most PowerMac models. Some models have multiple busses using
 620           different chipsets, though generally, MacIO is one of them.
 621
 622 config PATA_MARVELL
 623         tristate "Marvell PATA support via legacy mode"
 624         depends on PCI
 625         help
 626           This option enables limited support for the Marvell 88SE61xx ATA
 627           controllers. If you wish to use only the SATA ports then select
 628           the AHCI driver alone. If you wish to the use the PATA port or
 629           both SATA and PATA include this driver.
 630
 631           If unsure, say N.
 632
 633 config PATA_MPC52xx
 634         tristate "Freescale MPC52xx SoC internal IDE"
 635         depends on PPC_MPC52xx && PPC_BESTCOMM
 636         select PPC_BESTCOMM_ATA
 637         help
 638           This option enables support for integrated IDE controller
 639           of the Freescale MPC52xx SoC.
 640
 641           If unsure, say N.
 642
 643 config PATA_NETCELL
 644         tristate "NETCELL Revolution RAID support"
 645         depends on PCI
 646         help
 647           This option enables support for the Netcell Revolution RAID
 648           PATA controller.
 649
 650           If unsure, say N.
 651
 652 config PATA_NINJA32
 653         tristate "Ninja32/Delkin Cardbus ATA support"
 654         depends on PCI
 655         help
 656           This option enables support for the Ninja32, Delkin and
 657           possibly other brands of Cardbus ATA adapter
 658
 659           If unsure, say N.
 660
 661 config PATA_NS87415
 662         tristate "Nat Semi NS87415 PATA support"
 663         depends on PCI
 664         help
 665           This option enables support for the National Semiconductor
 666           NS87415 PCI-IDE controller.
 667
 668           If unsure, say N.
 669
 670 config PATA_OLDPIIX
 671         tristate "Intel PATA old PIIX support"
 672         depends on PCI
 673         help
 674           This option enables support for early PIIX PATA support.
 675
 676           If unsure, say N.
 677
 678 config PATA_OPTIDMA
 679         tristate "OPTI FireStar PATA support (Very Experimental)"
 680         depends on PCI
 681         help
 682           This option enables DMA/PIO support for the later OPTi
 683           controllers found on some old motherboards and in some
 684           laptops.
 685
 686           If unsure, say N.
 687
 688 config PATA_PDC2027X
 689         tristate "Promise PATA 2027x support"
 690         depends on PCI
 691         help
 692           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 693
 694           If unsure, say N.
 695
 696 config PATA_PDC_OLD
 697         tristate "Older Promise PATA controller support"
 698         depends on PCI
 699         help
 700           This option enables support for the Promise 20246, 20262, 20263,
 701           20265 and 20267 adapters.
 702
 703           If unsure, say N.
 704
 705 config PATA_RADISYS
 706         tristate "RADISYS 82600 PATA support (Experimental)"
 707         depends on PCI
 708         help
 709           This option enables support for the RADISYS 82600
 710           PATA controllers via the new ATA layer
 711
 712           If unsure, say N.
 713
 714 config PATA_RDC
 715         tristate "RDC PATA support"
 716         depends on PCI
 717         help
 718           This option enables basic support for the later RDC PATA controllers
 719           controllers via the new ATA layer. For the RDC 1010, you need to
 720           enable the IT821X driver instead.
 721
 722           If unsure, say N.
 723
 724 config PATA_SC1200
 725         tristate "SC1200 PATA support"
 726         depends on PCI && (X86_32 || COMPILE_TEST)
 727         help
 728           This option enables support for the NatSemi/AMD SC1200 SoC
 729           companion chip used with the Geode processor family.
 730
 731           If unsure, say N.
 732
 733 config PATA_SCH
 734         tristate "Intel SCH PATA support"
 735         depends on PCI
 736         help
 737           This option enables support for Intel SCH PATA on the Intel
 738           SCH (US15W, US15L, UL11L) series host controllers.
 739
 740           If unsure, say N.
 741
 742 config PATA_SERVERWORKS
 743         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 744         depends on PCI
 745         help
 746           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 747           HT1000 PATA controllers, via the new ATA layer.
 748
 749           If unsure, say N.
 750
 751 config PATA_SIL680
 752         tristate "CMD / Silicon Image 680 PATA support"
 753         depends on PCI
 754         help
 755           This option enables support for CMD / Silicon Image 680 PATA.
 756
 757           If unsure, say N.
 758
 759 config PATA_SIS
 760         tristate "SiS PATA support"
 761         depends on PCI
 762         help
 763           This option enables support for SiS PATA controllers
 764
 765           If unsure, say N.
 766
 767 config PATA_TOSHIBA
 768         tristate "Toshiba Piccolo support (Experimental)"
 769         depends on PCI
 770         help
 771           Support for the Toshiba Piccolo controllers. Currently only the
 772           primary channel is supported by this driver.
 773
 774           If unsure, say N.
 775
 776 config PATA_TRIFLEX
 777         tristate "Compaq Triflex PATA support"
 778         depends on PCI
 779         help
 780           Enable support for the Compaq 'Triflex' IDE controller as found
 781           on many Compaq Pentium-Pro systems, via the new ATA layer.
 782
 783           If unsure, say N.
 784
 785 config PATA_VIA
 786         tristate "VIA PATA support"
 787         depends on PCI
 788         help
 789           This option enables support for the VIA PATA interfaces
 790           found on the many VIA chipsets.
 791
 792           If unsure, say N.
 793
 794 config PATA_PXA
 795         tristate "PXA DMA-capable PATA support"
 796         depends on ARCH_PXA
 797         help
 798           This option enables support for harddrive attached to PXA CPU's bus.
 799
 800           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 801                 is not capable of doing MWDMA, use pata_platform instead.
 802
 803           If unsure, say N.
 804
 805 config PATA_WINBOND
 806         tristate "Winbond SL82C105 PATA support"
 807         depends on PCI
 808         help
 809           This option enables support for SL82C105 PATA devices found in the
 810           Netwinder and some other systems
 811
 812           If unsure, say N.
 813
 814 endif # ATA_BMDMA
 815
 816 comment "PIO-only SFF controllers"
 817
 818 config PATA_AT32
 819         tristate "Atmel AVR32 PATA support (Experimental)"
 820         depends on AVR32 && PLATFORM_AT32AP
 821         help
 822           This option enables support for the IDE devices on the
 823           Atmel AT32AP platform.
 824
 825           If unsure, say N.
 826
 827 config PATA_AT91
 828         tristate "PATA support for AT91SAM9260"
 829         depends on ARM && SOC_AT91SAM9
 830         depends on !ARCH_MULTIPLATFORM
 831         help
 832           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 833
 834           If unsure, say N.
 835
 836 config PATA_CMD640_PCI
 837         tristate "CMD640 PCI PATA support (Experimental)"
 838         depends on PCI
 839         help
 840           This option enables support for the CMD640 PCI IDE
 841           interface chip. Only the primary channel is currently
 842           supported.
 843
 844           If unsure, say N.
 845
 846 config PATA_ISAPNP
 847         tristate "ISA Plug and Play PATA support"
 848         depends on ISAPNP
 849         help
 850           This option enables support for ISA plug & play ATA
 851           controllers such as those found on old soundcards.
 852
 853           If unsure, say N.
 854
 855 config PATA_IXP4XX_CF
 856         tristate "IXP4XX Compact Flash support"
 857         depends on ARCH_IXP4XX
 858         help
 859           This option enables support for a Compact Flash connected on
 860           the ixp4xx expansion bus. This driver had been written for
 861           Loft/Avila boards in mind but can work with others.
 862
 863           If unsure, say N.
 864
 865 config PATA_MPIIX
 866         tristate "Intel PATA MPIIX support"
 867         depends on PCI
 868         help
 869           This option enables support for MPIIX PATA support.
 870
 871           If unsure, say N.
 872
 873 config PATA_NS87410
 874         tristate "Nat Semi NS87410 PATA support"
 875         depends on PCI
 876         help
 877           This option enables support for the National Semiconductor
 878           NS87410 PCI-IDE controller.
 879
 880           If unsure, say N.
 881
 882 config PATA_OPTI
 883         tristate "OPTI621/6215 PATA support (Very Experimental)"
 884         depends on PCI
 885         help
 886           This option enables full PIO support for the early Opti ATA
 887           controllers found on some old motherboards.
 888
 889           If unsure, say N.
 890
 891 config PATA_PALMLD
 892         tristate "Palm LifeDrive PATA support"
 893         depends on MACH_PALMLD
 894         help
 895           This option enables support for Palm LifeDrive's internal ATA
 896           port via the new ATA layer.
 897
 898           If unsure, say N.
 899
 900 config PATA_PCMCIA
 901         tristate "PCMCIA PATA support"
 902         depends on PCMCIA
 903         help
 904           This option enables support for PCMCIA ATA interfaces, including
 905           compact flash card adapters via the new ATA layer.
 906
 907           If unsure, say N.
 908
 909 config PATA_PLATFORM
 910         tristate "Generic platform device PATA support"
 911         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 912         help
 913           This option enables support for generic directly connected ATA
 914           devices commonly found on embedded systems.
 915
 916           If unsure, say N.
 917
 918 config PATA_OF_PLATFORM
 919         tristate "OpenFirmware platform device PATA support"
 920         depends on PATA_PLATFORM && OF
 921         help
 922           This option enables support for generic directly connected ATA
 923           devices commonly found on embedded systems with OpenFirmware
 924           bindings.
 925
 926           If unsure, say N.
 927
 928 config PATA_QDI
 929         tristate "QDI VLB PATA support"
 930         depends on ISA
 931         select PATA_LEGACY
 932         help
 933           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 934
 935 config PATA_RB532
 936         tristate "RouterBoard 532 PATA CompactFlash support"
 937         depends on MIKROTIK_RB532
 938         help
 939           This option enables support for the RouterBoard 532
 940           PATA CompactFlash controller.
 941
 942           If unsure, say N.
 943
 944 config PATA_RZ1000
 945         tristate "PC Tech RZ1000 PATA support"
 946         depends on PCI
 947         help
 948           This option enables basic support for the PC Tech RZ1000/1
 949           PATA controllers via the new ATA layer
 950
 951           If unsure, say N.
 952
 953 config PATA_SAMSUNG_CF
 954         tristate "Samsung SoC PATA support"
 955         depends on SAMSUNG_DEV_IDE
 956         help
 957           This option enables basic support for Samsung's S3C/S5P board
 958           PATA controllers via the new ATA layer
 959
 960           If unsure, say N.
 961
 962 config PATA_WINBOND_VLB
 963         tristate "Winbond W83759A VLB PATA support (Experimental)"
 964         depends on ISA
 965         select PATA_LEGACY
 966         help
 967           Support for the Winbond W83759A controller on Vesa Local Bus
 968           systems.
 969
 970 comment "Generic fallback / legacy drivers"
 971
 972 config PATA_ACPI
 973         tristate "ACPI firmware driver for PATA"
 974         depends on ATA_ACPI && ATA_BMDMA
 975         help
 976           This option enables an ACPI method driver which drives
 977           motherboard PATA controller interfaces through the ACPI
 978           firmware in the BIOS. This driver can sometimes handle
 979           otherwise unsupported hardware.
 980
 981 config ATA_GENERIC
 982         tristate "Generic ATA support"
 983         depends on PCI && ATA_BMDMA
 984         help
 985           This option enables support for generic BIOS configured
 986           ATA controllers via the new ATA layer
 987
 988           If unsure, say N.
 989
 990 config PATA_LEGACY
 991         tristate "Legacy ISA PATA support (Experimental)"
 992         depends on (ISA || PCI)
 993         help
 994           This option enables support for ISA/VLB/PCI bus legacy PATA
 995           ports and allows them to be accessed via the new ATA layer.
 996
 997           If unsure, say N.
 998
 999 endif # ATA_SFF
1000 endif # ATA