IB/mlx4: Fix EQ deallocation in legacy mode
[deliverable/linux.git] / drivers / ata / ahci_platform.c
1 /*
2 * AHCI SATA platform driver
3 *
4 * Copyright 2004-2005 Red Hat, Inc.
5 * Jeff Garzik <jgarzik@pobox.com>
6 * Copyright 2010 MontaVista Software, LLC.
7 * Anton Vorontsov <avorontsov@ru.mvista.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2, or (at your option)
12 * any later version.
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/gfp.h>
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/interrupt.h>
20 #include <linux/device.h>
21 #include <linux/platform_device.h>
22 #include <linux/libata.h>
23 #include <linux/ahci_platform.h>
24 #include "ahci.h"
25
26 enum ahci_type {
27 AHCI, /* standard platform ahci */
28 IMX53_AHCI, /* ahci on i.mx53 */
29 STRICT_AHCI, /* delayed DMA engine start */
30 };
31
32 static struct platform_device_id ahci_devtype[] = {
33 {
34 .name = "ahci",
35 .driver_data = AHCI,
36 }, {
37 .name = "imx53-ahci",
38 .driver_data = IMX53_AHCI,
39 }, {
40 .name = "strict-ahci",
41 .driver_data = STRICT_AHCI,
42 }, {
43 /* sentinel */
44 }
45 };
46 MODULE_DEVICE_TABLE(platform, ahci_devtype);
47
48
49 static const struct ata_port_info ahci_port_info[] = {
50 /* by features */
51 [AHCI] = {
52 .flags = AHCI_FLAG_COMMON,
53 .pio_mask = ATA_PIO4,
54 .udma_mask = ATA_UDMA6,
55 .port_ops = &ahci_ops,
56 },
57 [IMX53_AHCI] = {
58 .flags = AHCI_FLAG_COMMON,
59 .pio_mask = ATA_PIO4,
60 .udma_mask = ATA_UDMA6,
61 .port_ops = &ahci_pmp_retry_srst_ops,
62 },
63 [STRICT_AHCI] = {
64 AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE),
65 .flags = AHCI_FLAG_COMMON,
66 .pio_mask = ATA_PIO4,
67 .udma_mask = ATA_UDMA6,
68 .port_ops = &ahci_ops,
69 },
70 };
71
72 static struct scsi_host_template ahci_platform_sht = {
73 AHCI_SHT("ahci_platform"),
74 };
75
76 static int __init ahci_probe(struct platform_device *pdev)
77 {
78 struct device *dev = &pdev->dev;
79 struct ahci_platform_data *pdata = dev_get_platdata(dev);
80 const struct platform_device_id *id = platform_get_device_id(pdev);
81 struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
82 const struct ata_port_info *ppi[] = { &pi, NULL };
83 struct ahci_host_priv *hpriv;
84 struct ata_host *host;
85 struct resource *mem;
86 int irq;
87 int n_ports;
88 int i;
89 int rc;
90
91 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
92 if (!mem) {
93 dev_err(dev, "no mmio space\n");
94 return -EINVAL;
95 }
96
97 irq = platform_get_irq(pdev, 0);
98 if (irq <= 0) {
99 dev_err(dev, "no irq\n");
100 return -EINVAL;
101 }
102
103 if (pdata && pdata->ata_port_info)
104 pi = *pdata->ata_port_info;
105
106 hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
107 if (!hpriv) {
108 dev_err(dev, "can't alloc ahci_host_priv\n");
109 return -ENOMEM;
110 }
111
112 hpriv->flags |= (unsigned long)pi.private_data;
113
114 hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
115 if (!hpriv->mmio) {
116 dev_err(dev, "can't map %pR\n", mem);
117 return -ENOMEM;
118 }
119
120 /*
121 * Some platforms might need to prepare for mmio region access,
122 * which could be done in the following init call. So, the mmio
123 * region shouldn't be accessed before init (if provided) has
124 * returned successfully.
125 */
126 if (pdata && pdata->init) {
127 rc = pdata->init(dev, hpriv->mmio);
128 if (rc)
129 return rc;
130 }
131
132 ahci_save_initial_config(dev, hpriv,
133 pdata ? pdata->force_port_map : 0,
134 pdata ? pdata->mask_port_map : 0);
135
136 /* prepare host */
137 if (hpriv->cap & HOST_CAP_NCQ)
138 pi.flags |= ATA_FLAG_NCQ;
139
140 if (hpriv->cap & HOST_CAP_PMP)
141 pi.flags |= ATA_FLAG_PMP;
142
143 ahci_set_em_messages(hpriv, &pi);
144
145 /* CAP.NP sometimes indicate the index of the last enabled
146 * port, at other times, that of the last possible port, so
147 * determining the maximum port number requires looking at
148 * both CAP.NP and port_map.
149 */
150 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
151
152 host = ata_host_alloc_pinfo(dev, ppi, n_ports);
153 if (!host) {
154 rc = -ENOMEM;
155 goto err0;
156 }
157
158 host->private_data = hpriv;
159
160 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
161 host->flags |= ATA_HOST_PARALLEL_SCAN;
162 else
163 printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
164
165 if (pi.flags & ATA_FLAG_EM)
166 ahci_reset_em(host);
167
168 for (i = 0; i < host->n_ports; i++) {
169 struct ata_port *ap = host->ports[i];
170
171 ata_port_desc(ap, "mmio %pR", mem);
172 ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
173
174 /* set enclosure management message type */
175 if (ap->flags & ATA_FLAG_EM)
176 ap->em_message_type = hpriv->em_msg_type;
177
178 /* disabled/not-implemented port */
179 if (!(hpriv->port_map & (1 << i)))
180 ap->ops = &ata_dummy_port_ops;
181 }
182
183 rc = ahci_reset_controller(host);
184 if (rc)
185 goto err0;
186
187 ahci_init_controller(host);
188 ahci_print_info(host, "platform");
189
190 rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
191 &ahci_platform_sht);
192 if (rc)
193 goto err0;
194
195 return 0;
196 err0:
197 if (pdata && pdata->exit)
198 pdata->exit(dev);
199 return rc;
200 }
201
202 static int __devexit ahci_remove(struct platform_device *pdev)
203 {
204 struct device *dev = &pdev->dev;
205 struct ahci_platform_data *pdata = dev_get_platdata(dev);
206 struct ata_host *host = dev_get_drvdata(dev);
207
208 ata_host_detach(host);
209
210 if (pdata && pdata->exit)
211 pdata->exit(dev);
212
213 return 0;
214 }
215
216 #ifdef CONFIG_PM
217 static int ahci_suspend(struct device *dev)
218 {
219 struct ahci_platform_data *pdata = dev_get_platdata(dev);
220 struct ata_host *host = dev_get_drvdata(dev);
221 struct ahci_host_priv *hpriv = host->private_data;
222 void __iomem *mmio = hpriv->mmio;
223 u32 ctl;
224 int rc;
225
226 if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
227 dev_err(dev, "firmware update required for suspend/resume\n");
228 return -EIO;
229 }
230
231 /*
232 * AHCI spec rev1.1 section 8.3.3:
233 * Software must disable interrupts prior to requesting a
234 * transition of the HBA to D3 state.
235 */
236 ctl = readl(mmio + HOST_CTL);
237 ctl &= ~HOST_IRQ_EN;
238 writel(ctl, mmio + HOST_CTL);
239 readl(mmio + HOST_CTL); /* flush */
240
241 rc = ata_host_suspend(host, PMSG_SUSPEND);
242 if (rc)
243 return rc;
244
245 if (pdata && pdata->suspend)
246 return pdata->suspend(dev);
247 return 0;
248 }
249
250 static int ahci_resume(struct device *dev)
251 {
252 struct ahci_platform_data *pdata = dev_get_platdata(dev);
253 struct ata_host *host = dev_get_drvdata(dev);
254 int rc;
255
256 if (pdata && pdata->resume) {
257 rc = pdata->resume(dev);
258 if (rc)
259 return rc;
260 }
261
262 if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
263 rc = ahci_reset_controller(host);
264 if (rc)
265 return rc;
266
267 ahci_init_controller(host);
268 }
269
270 ata_host_resume(host);
271
272 return 0;
273 }
274
275 static struct dev_pm_ops ahci_pm_ops = {
276 .suspend = &ahci_suspend,
277 .resume = &ahci_resume,
278 };
279 #endif
280
281 static const struct of_device_id ahci_of_match[] = {
282 { .compatible = "calxeda,hb-ahci", },
283 { .compatible = "snps,spear-ahci", },
284 {},
285 };
286 MODULE_DEVICE_TABLE(of, ahci_of_match);
287
288 static struct platform_driver ahci_driver = {
289 .remove = __devexit_p(ahci_remove),
290 .driver = {
291 .name = "ahci",
292 .owner = THIS_MODULE,
293 .of_match_table = ahci_of_match,
294 #ifdef CONFIG_PM
295 .pm = &ahci_pm_ops,
296 #endif
297 },
298 .id_table = ahci_devtype,
299 };
300
301 static int __init ahci_init(void)
302 {
303 return platform_driver_probe(&ahci_driver, ahci_probe);
304 }
305 module_init(ahci_init);
306
307 static void __exit ahci_exit(void)
308 {
309 platform_driver_unregister(&ahci_driver);
310 }
311 module_exit(ahci_exit);
312
313 MODULE_DESCRIPTION("AHCI SATA platform driver");
314 MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
315 MODULE_LICENSE("GPL");
316 MODULE_ALIAS("platform:ahci");
This page took 0.135393 seconds and 5 git commands to generate.