projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
[libata] Remove ->port_disable() hook
[deliverable/linux.git] / drivers / ata / pata_qdi.c
1 /*
2 * pata_qdi.c - QDI VLB ATA controllers
3 * (C) 2006 Red Hat <alan@redhat.com>
4 *
5 * This driver mostly exists as a proof of concept for non PCI devices under
6 * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
7 * useful.
8 *
9 * Tuning code written from the documentation at
10 * http://www.ryston.cz/petr/vlb/qd6500.html
11 * http://www.ryston.cz/petr/vlb/qd6580.html
12 *
13 * Probe code based on drivers/ide/legacy/qd65xx.c
14 * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
15 * Samuel Thibault <samuel.thibault@fnac.net>
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <scsi/scsi_host.h>
25 #include <linux/libata.h>
26 #include <linux/platform_device.h>
27
28 #define DRV_NAME "pata_qdi"
29 #define DRV_VERSION "0.3.1"
30
31 #define NR_HOST 4 /* Two 6580s */
32
33 struct qdi_data {
34 unsigned long timing;
35 u8 clock[2];
36 u8 last;
37 int fast;
38 struct platform_device *platform_dev;
39
40 };
41
42 static struct ata_host *qdi_host[NR_HOST];
43 static struct qdi_data qdi_data[NR_HOST];
44 static int nr_qdi_host;
45
46 #ifdef MODULE
47 static int probe_qdi = 1;
48 #else
49 static int probe_qdi;
50 #endif
51
52 static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
53 {
54 struct ata_timing t;
55 struct qdi_data *qdi = ap->host->private_data;
56 int active, recovery;
57 u8 timing;
58
59 /* Get the timing data in cycles */
60 ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
61
62 if (qdi->fast) {
63 active = 8 - FIT(t.active, 1, 8);
64 recovery = 18 - FIT(t.recover, 3, 18);
65 } else {
66 active = 9 - FIT(t.active, 2, 9);
67 recovery = 15 - FIT(t.recover, 0, 15);
68 }
69 timing = (recovery << 4) | active | 0x08;
70
71 qdi->clock[adev->devno] = timing;
72
73 outb(timing, qdi->timing);
74 }
75
76 static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
77 {
78 struct ata_timing t;
79 struct qdi_data *qdi = ap->host->private_data;
80 int active, recovery;
81 u8 timing;
82
83 /* Get the timing data in cycles */
84 ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
85
86 if (qdi->fast) {
87 active = 8 - FIT(t.active, 1, 8);
88 recovery = 18 - FIT(t.recover, 3, 18);
89 } else {
90 active = 9 - FIT(t.active, 2, 9);
91 recovery = 15 - FIT(t.recover, 0, 15);
92 }
93 timing = (recovery << 4) | active | 0x08;
94
95 qdi->clock[adev->devno] = timing;
96
97 outb(timing, qdi->timing);
98
99 /* Clear the FIFO */
100 if (adev->class != ATA_DEV_ATA)
101 outb(0x5F, (qdi->timing & 0xFFF0) + 3);
102 }
103
104 /**
105 * qdi_qc_issue_prot - command issue
106 * @qc: command pending
107 *
108 * Called when the libata layer is about to issue a command. We wrap
109 * this interface so that we can load the correct ATA timings.
110 */
111
112 static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
113 {
114 struct ata_port *ap = qc->ap;
115 struct ata_device *adev = qc->dev;
116 struct qdi_data *qdi = ap->host->private_data;
117
118 if (qdi->clock[adev->devno] != qdi->last) {
119 if (adev->pio_mode) {
120 qdi->last = qdi->clock[adev->devno];
121 outb(qdi->clock[adev->devno], qdi->timing);
122 }
123 }
124 return ata_qc_issue_prot(qc);
125 }
126
127 static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
128 {
129 struct ata_port *ap = adev->link->ap;
130 int slop = buflen & 3;
131
132 if (ata_id_has_dword_io(adev->id)) {
133 if (write_data)
134 iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
135 else
136 ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
137
138 if (unlikely(slop)) {
139 u32 pad;
140 if (write_data) {
141 memcpy(&pad, buf + buflen - slop, slop);
142 pad = le32_to_cpu(pad);
143 iowrite32(pad, ap->ioaddr.data_addr);
144 } else {
145 pad = ioread32(ap->ioaddr.data_addr);
146 pad = cpu_to_le32(pad);
147 memcpy(buf + buflen - slop, &pad, slop);
148 }
149 }
150 } else
151 ata_data_xfer(adev, buf, buflen, write_data);
152 }
153
154 static struct scsi_host_template qdi_sht = {
155 .module = THIS_MODULE,
156 .name = DRV_NAME,
157 .ioctl = ata_scsi_ioctl,
158 .queuecommand = ata_scsi_queuecmd,
159 .can_queue = ATA_DEF_QUEUE,
160 .this_id = ATA_SHT_THIS_ID,
161 .sg_tablesize = LIBATA_MAX_PRD,
162 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
163 .emulated = ATA_SHT_EMULATED,
164 .use_clustering = ATA_SHT_USE_CLUSTERING,
165 .proc_name = DRV_NAME,
166 .dma_boundary = ATA_DMA_BOUNDARY,
167 .slave_configure = ata_scsi_slave_config,
168 .slave_destroy = ata_scsi_slave_destroy,
169 .bios_param = ata_std_bios_param,
170 };
171
172 static struct ata_port_operations qdi6500_port_ops = {
173 .set_piomode = qdi6500_set_piomode,
174
175 .tf_load = ata_tf_load,
176 .tf_read = ata_tf_read,
177 .check_status = ata_check_status,
178 .exec_command = ata_exec_command,
179 .dev_select = ata_std_dev_select,
180
181 .freeze = ata_bmdma_freeze,
182 .thaw = ata_bmdma_thaw,
183 .error_handler = ata_bmdma_error_handler,
184 .post_internal_cmd = ata_bmdma_post_internal_cmd,
185 .cable_detect = ata_cable_40wire,
186
187 .qc_prep = ata_qc_prep,
188 .qc_issue = qdi_qc_issue_prot,
189
190 .data_xfer = qdi_data_xfer,
191
192 .irq_clear = ata_bmdma_irq_clear,
193 .irq_on = ata_irq_on,
194
195 .port_start = ata_port_start,
196 };
197
198 static struct ata_port_operations qdi6580_port_ops = {
199 .set_piomode = qdi6580_set_piomode,
200
201 .tf_load = ata_tf_load,
202 .tf_read = ata_tf_read,
203 .check_status = ata_check_status,
204 .exec_command = ata_exec_command,
205 .dev_select = ata_std_dev_select,
206
207 .freeze = ata_bmdma_freeze,
208 .thaw = ata_bmdma_thaw,
209 .error_handler = ata_bmdma_error_handler,
210 .post_internal_cmd = ata_bmdma_post_internal_cmd,
211 .cable_detect = ata_cable_40wire,
212
213 .qc_prep = ata_qc_prep,
214 .qc_issue = qdi_qc_issue_prot,
215
216 .data_xfer = qdi_data_xfer,
217
218 .irq_clear = ata_bmdma_irq_clear,
219 .irq_on = ata_irq_on,
220
221 .port_start = ata_port_start,
222 };
223
224 /**
225 * qdi_init_one - attach a qdi interface
226 * @type: Type to display
227 * @io: I/O port start
228 * @irq: interrupt line
229 * @fast: True if on a > 33Mhz VLB
230 *
231 * Register an ISA bus IDE interface. Such interfaces are PIO and we
232 * assume do not support IRQ sharing.
233 */
234
235 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
236 {
237 struct platform_device *pdev;
238 struct ata_host *host;
239 struct ata_port *ap;
240 void __iomem *io_addr, *ctl_addr;
241 int ret;
242
243 /*
244 * Fill in a probe structure first of all
245 */
246
247 pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
248 if (IS_ERR(pdev))
249 return PTR_ERR(pdev);
250
251 ret = -ENOMEM;
252 io_addr = devm_ioport_map(&pdev->dev, io, 8);
253 ctl_addr = devm_ioport_map(&pdev->dev, io + 0x206, 1);
254 if (!io_addr || !ctl_addr)
255 goto fail;
256
257 ret = -ENOMEM;
258 host = ata_host_alloc(&pdev->dev, 1);
259 if (!host)
260 goto fail;
261 ap = host->ports[0];
262
263 if (type == 6580) {
264 ap->ops = &qdi6580_port_ops;
265 ap->pio_mask = 0x1F;
266 ap->flags |= ATA_FLAG_SLAVE_POSS;
267 } else {
268 ap->ops = &qdi6500_port_ops;
269 ap->pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */
270 ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
271 }
272
273 ap->ioaddr.cmd_addr = io_addr;
274 ap->ioaddr.altstatus_addr = ctl_addr;
275 ap->ioaddr.ctl_addr = ctl_addr;
276 ata_std_ports(&ap->ioaddr);
277
278 /*
279 * Hook in a private data structure per channel
280 */
281 ap->private_data = &qdi_data[nr_qdi_host];
282
283 qdi_data[nr_qdi_host].timing = port;
284 qdi_data[nr_qdi_host].fast = fast;
285 qdi_data[nr_qdi_host].platform_dev = pdev;
286
287 printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
288
289 /* activate */
290 ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
291 if (ret)
292 goto fail;
293
294 qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
295 return 0;
296
297 fail:
298 platform_device_unregister(pdev);
299 return ret;
300 }
301
302 /**
303 * qdi_init - attach qdi interfaces
304 *
305 * Attach qdi IDE interfaces by scanning the ports it may occupy.
306 */
307
308 static __init int qdi_init(void)
309 {
310 unsigned long flags;
311 static const unsigned long qd_port[2] = { 0x30, 0xB0 };
312 static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
313 static const int ide_irq[2] = { 14, 15 };
314
315 int ct = 0;
316 int i;
317
318 if (probe_qdi == 0)
319 return -ENODEV;
320
321 /*
322 * Check each possible QD65xx base address
323 */
324
325 for (i = 0; i < 2; i++) {
326 unsigned long port = qd_port[i];
327 u8 r, res;
328
329
330 if (request_region(port, 2, "pata_qdi")) {
331 /* Check for a card */
332 local_irq_save(flags);
333 r = inb_p(port);
334 outb_p(0x19, port);
335 res = inb_p(port);
336 outb_p(r, port);
337 local_irq_restore(flags);
338
339 /* Fail */
340 if (res == 0x19)
341 {
342 release_region(port, 2);
343 continue;
344 }
345
346 /* Passes the presence test */
347 r = inb_p(port + 1); /* Check port agrees with port set */
348 if ((r & 2) >> 1 != i) {
349 release_region(port, 2);
350 continue;
351 }
352
353 /* Check card type */
354 if ((r & 0xF0) == 0xC0) {
355 /* QD6500: single channel */
356 if (r & 8) {
357 /* Disabled ? */
358 release_region(port, 2);
359 continue;
360 }
361 if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
362 ct++;
363 }
364 if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
365 /* QD6580: dual channel */
366 if (!request_region(port + 2 , 2, "pata_qdi"))
367 {
368 release_region(port, 2);
369 continue;
370 }
371 res = inb(port + 3);
372 if (res & 1) {
373 /* Single channel mode */
374 if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
375 ct++;
376 } else {
377 /* Dual channel mode */
378 if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
379 ct++;
380 if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
381 ct++;
382 }
383 }
384 }
385 }
386 if (ct != 0)
387 return 0;
388 return -ENODEV;
389 }
390
391 static __exit void qdi_exit(void)
392 {
393 int i;
394
395 for (i = 0; i < nr_qdi_host; i++) {
396 ata_host_detach(qdi_host[i]);
397 /* Free the control resource. The 6580 dual channel has the resources
398 * claimed as a pair of 2 byte resources so we need no special cases...
399 */
400 release_region(qdi_data[i].timing, 2);
401 platform_device_unregister(qdi_data[i].platform_dev);
402 }
403 }
404
405 MODULE_AUTHOR("Alan Cox");
406 MODULE_DESCRIPTION("low-level driver for qdi ATA");
407 MODULE_LICENSE("GPL");
408 MODULE_VERSION(DRV_VERSION);
409
410 module_init(qdi_init);
411 module_exit(qdi_exit);
412
413 module_param(probe_qdi, int, 0);
414
Linux kernel - Deliverables
This page took 0.061779 seconds and 5 git commands to generate.