drivers/ata/pata_sil680.c

   1 /*
   2  * pata_sil680.c        - SIL680 PATA for new ATA layer
   3  *                        (C) 2005 Red Hat Inc
   4  *                        Alan Cox <alan@redhat.com>
   5  *
   6  * based upon
   7  *
   8  * linux/drivers/ide/pci/siimage.c              Version 1.07    Nov 30, 2003
   9  *
  10  * Copyright (C) 2001-2002      Andre Hedrick <andre@linux-ide.org>
  11  * Copyright (C) 2003           Red Hat <alan@redhat.com>
  12  *
  13  *  May be copied or modified under the terms of the GNU General Public License
  14  *
  15  *  Documentation publically available.
  16  *
  17  *      If you have strange problems with nVidia chipset systems please
  18  *      see the SI support documentation and update your system BIOS
  19  *      if neccessary
  20  *
  21  * TODO
  22  *      If we know all our devices are LBA28 (or LBA28 sized)  we could use
  23  *      the command fifo mode.
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28 #include <linux/pci.h>
  29 #include <linux/init.h>
  30 #include <linux/blkdev.h>
  31 #include <linux/delay.h>
  32 #include <scsi/scsi_host.h>
  33 #include <linux/libata.h>
  34
  35 #define DRV_NAME "pata_sil680"
  36 #define DRV_VERSION "0.4.6"
  37
  38 /**
  39  *      sil680_selreg           -       return register base
  40  *      @hwif: interface
  41  *      @r: config offset
  42  *
  43  *      Turn a config register offset into the right address in either
  44  *      PCI space or MMIO space to access the control register in question
  45  *      Thankfully this is a configuration operation so isnt performance
  46  *      criticial.
  47  */
  48
  49 static unsigned long sil680_selreg(struct ata_port *ap, int r)
  50 {
  51         unsigned long base = 0xA0 + r;
  52         base += (ap->port_no << 4);
  53         return base;
  54 }
  55
  56 /**
  57  *      sil680_seldev           -       return register base
  58  *      @hwif: interface
  59  *      @r: config offset
  60  *
  61  *      Turn a config register offset into the right address in either
  62  *      PCI space or MMIO space to access the control register in question
  63  *      including accounting for the unit shift.
  64  */
  65
  66 static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
  67 {
  68         unsigned long base = 0xA0 + r;
  69         base += (ap->port_no << 4);
  70         base |= adev->devno ? 2 : 0;
  71         return base;
  72 }
  73
  74
  75 /**
  76  *      sil680_cable_detect     -       cable detection
  77  *      @ap: ATA port
  78  *
  79  *      Perform cable detection. The SIL680 stores this in PCI config
  80  *      space for us.
  81  */
  82
  83 static int sil680_cable_detect(struct ata_port *ap) {
  84         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  85         unsigned long addr = sil680_selreg(ap, 0);
  86         u8 ata66;
  87         pci_read_config_byte(pdev, addr, &ata66);
  88         if (ata66 & 1)
  89                 return ATA_CBL_PATA80;
  90         else
  91                 return ATA_CBL_PATA40;
  92 }
  93
  94 /**
  95  *      sil680_bus_reset        -       reset the SIL680 bus
  96  *      @ap: ATA port to reset
  97  *      @deadline: deadline jiffies for the operation
  98  *
  99  *      Perform the SIL680 housekeeping when doing an ATA bus reset
 100  */
 101
 102 static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes,
 103                             unsigned long deadline)
 104 {
 105         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 106         unsigned long addr = sil680_selreg(ap, 0);
 107         u8 reset;
 108
 109         pci_read_config_byte(pdev, addr, &reset);
 110         pci_write_config_byte(pdev, addr, reset | 0x03);
 111         udelay(25);
 112         pci_write_config_byte(pdev, addr, reset);
 113         return ata_std_softreset(ap, classes, deadline);
 114 }
 115
 116 static void sil680_error_handler(struct ata_port *ap)
 117 {
 118         ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
 119 }
 120
 121 /**
 122  *      sil680_set_piomode      -       set initial PIO mode data
 123  *      @ap: ATA interface
 124  *      @adev: ATA device
 125  *
 126  *      Program the SIL680 registers for PIO mode. Note that the task speed
 127  *      registers are shared between the devices so we must pick the lowest
 128  *      mode for command work.
 129  */
 130
 131 static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
 132 {
 133         static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
 134         static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
 135
 136         unsigned long tfaddr = sil680_selreg(ap, 0x02);
 137         unsigned long addr = sil680_seldev(ap, adev, 0x04);
 138         unsigned long addr_mask = 0x80 + 4 * ap->port_no;
 139         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 140         int pio = adev->pio_mode - XFER_PIO_0;
 141         int lowest_pio = pio;
 142         int port_shift = 4 * adev->devno;
 143         u16 reg;
 144         u8 mode;
 145
 146         struct ata_device *pair = ata_dev_pair(adev);
 147
 148         if (pair != NULL && adev->pio_mode > pair->pio_mode)
 149                 lowest_pio = pair->pio_mode - XFER_PIO_0;
 150
 151         pci_write_config_word(pdev, addr, speed_p[pio]);
 152         pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
 153
 154         pci_read_config_word(pdev, tfaddr-2, &reg);
 155         pci_read_config_byte(pdev, addr_mask, &mode);
 156
 157         reg &= ~0x0200;                 /* Clear IORDY */
 158         mode &= ~(3 << port_shift);     /* Clear IORDY and DMA bits */
 159
 160         if (ata_pio_need_iordy(adev)) {
 161                 reg |= 0x0200;          /* Enable IORDY */
 162                 mode |= 1 << port_shift;
 163         }
 164         pci_write_config_word(pdev, tfaddr-2, reg);
 165         pci_write_config_byte(pdev, addr_mask, mode);
 166 }
 167
 168 /**
 169  *      sil680_set_dmamode      -       set initial DMA mode data
 170  *      @ap: ATA interface
 171  *      @adev: ATA device
 172  *
 173  *      Program the MWDMA/UDMA modes for the sil680 k
 174  *      chipset. The MWDMA mode values are pulled from a lookup table
 175  *      while the chipset uses mode number for UDMA.
 176  */
 177
 178 static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 179 {
 180         static u8 ultra_table[2][7] = {
 181                 { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF },   /* 100MHz */
 182                 { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 },   /* 133Mhz */
 183         };
 184         static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
 185
 186         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 187         unsigned long ma = sil680_seldev(ap, adev, 0x08);
 188         unsigned long ua = sil680_seldev(ap, adev, 0x0C);
 189         unsigned long addr_mask = 0x80 + 4 * ap->port_no;
 190         int port_shift = adev->devno * 4;
 191         u8 scsc, mode;
 192         u16 multi, ultra;
 193
 194         pci_read_config_byte(pdev, 0x8A, &scsc);
 195         pci_read_config_byte(pdev, addr_mask, &mode);
 196         pci_read_config_word(pdev, ma, &multi);
 197         pci_read_config_word(pdev, ua, &ultra);
 198
 199         /* Mask timing bits */
 200         ultra &= ~0x3F;
 201         mode &= ~(0x03 << port_shift);
 202
 203         /* Extract scsc */
 204         scsc = (scsc & 0x30) ? 1: 0;
 205
 206         if (adev->dma_mode >= XFER_UDMA_0) {
 207                 multi = 0x10C1;
 208                 ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
 209                 mode |= (0x03 << port_shift);
 210         } else {
 211                 multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
 212                 mode |= (0x02 << port_shift);
 213         }
 214         pci_write_config_byte(pdev, addr_mask, mode);
 215         pci_write_config_word(pdev, ma, multi);
 216         pci_write_config_word(pdev, ua, ultra);
 217 }
 218
 219 static struct scsi_host_template sil680_sht = {
 220         .module                 = THIS_MODULE,
 221         .name                   = DRV_NAME,
 222         .ioctl                  = ata_scsi_ioctl,
 223         .queuecommand           = ata_scsi_queuecmd,
 224         .can_queue              = ATA_DEF_QUEUE,
 225         .this_id                = ATA_SHT_THIS_ID,
 226         .sg_tablesize           = LIBATA_MAX_PRD,
 227         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
 228         .emulated               = ATA_SHT_EMULATED,
 229         .use_clustering         = ATA_SHT_USE_CLUSTERING,
 230         .proc_name              = DRV_NAME,
 231         .dma_boundary           = ATA_DMA_BOUNDARY,
 232         .slave_configure        = ata_scsi_slave_config,
 233         .slave_destroy          = ata_scsi_slave_destroy,
 234         .bios_param             = ata_std_bios_param,
 235 #ifdef CONFIG_PM
 236         .suspend                = ata_scsi_device_suspend,
 237         .resume                 = ata_scsi_device_resume,
 238 #endif
 239 };
 240
 241 static struct ata_port_operations sil680_port_ops = {
 242         .port_disable   = ata_port_disable,
 243         .set_piomode    = sil680_set_piomode,
 244         .set_dmamode    = sil680_set_dmamode,
 245         .mode_filter    = ata_pci_default_filter,
 246         .tf_load        = ata_tf_load,
 247         .tf_read        = ata_tf_read,
 248         .check_status   = ata_check_status,
 249         .exec_command   = ata_exec_command,
 250         .dev_select     = ata_std_dev_select,
 251
 252         .freeze         = ata_bmdma_freeze,
 253         .thaw           = ata_bmdma_thaw,
 254         .error_handler  = sil680_error_handler,
 255         .post_internal_cmd = ata_bmdma_post_internal_cmd,
 256         .cable_detect   = sil680_cable_detect,
 257
 258         .bmdma_setup    = ata_bmdma_setup,
 259         .bmdma_start    = ata_bmdma_start,
 260         .bmdma_stop     = ata_bmdma_stop,
 261         .bmdma_status   = ata_bmdma_status,
 262
 263         .qc_prep        = ata_qc_prep,
 264         .qc_issue       = ata_qc_issue_prot,
 265
 266         .data_xfer      = ata_data_xfer,
 267
 268         .irq_handler    = ata_interrupt,
 269         .irq_clear      = ata_bmdma_irq_clear,
 270         .irq_on         = ata_irq_on,
 271         .irq_ack        = ata_irq_ack,
 272
 273         .port_start     = ata_port_start,
 274 };
 275
 276 /**
 277  *      sil680_init_chip                -       chip setup
 278  *      @pdev: PCI device
 279  *
 280  *      Perform all the chip setup which must be done both when the device
 281  *      is powered up on boot and when we resume in case we resumed from RAM.
 282  *      Returns the final clock settings.
 283  */
 284
 285 static u8 sil680_init_chip(struct pci_dev *pdev)
 286 {
 287         u32 class_rev   = 0;
 288         u8 tmpbyte      = 0;
 289
 290         pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
 291         class_rev &= 0xff;
 292         /* FIXME: double check */
 293         pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
 294
 295         pci_write_config_byte(pdev, 0x80, 0x00);
 296         pci_write_config_byte(pdev, 0x84, 0x00);
 297
 298         pci_read_config_byte(pdev, 0x8A, &tmpbyte);
 299
 300         printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
 301                         tmpbyte & 1, tmpbyte & 0x30);
 302
 303         switch(tmpbyte & 0x30) {
 304                 case 0x00:
 305                         /* 133 clock attempt to force it on */
 306                         pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
 307                         break;
 308                 case 0x30:
 309                         /* if clocking is disabled */
 310                         /* 133 clock attempt to force it on */
 311                         pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
 312                         break;
 313                 case 0x10:
 314                         /* 133 already */
 315                         break;
 316                 case 0x20:
 317                         /* BIOS set PCI x2 clocking */
 318                         break;
 319         }
 320
 321         pci_read_config_byte(pdev,   0x8A, &tmpbyte);
 322         printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
 323                         tmpbyte & 1, tmpbyte & 0x30);
 324
 325         pci_write_config_byte(pdev,  0xA1, 0x72);
 326         pci_write_config_word(pdev,  0xA2, 0x328A);
 327         pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
 328         pci_write_config_dword(pdev, 0xA8, 0x43924392);
 329         pci_write_config_dword(pdev, 0xAC, 0x40094009);
 330         pci_write_config_byte(pdev,  0xB1, 0x72);
 331         pci_write_config_word(pdev,  0xB2, 0x328A);
 332         pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
 333         pci_write_config_dword(pdev, 0xB8, 0x43924392);
 334         pci_write_config_dword(pdev, 0xBC, 0x40094009);
 335
 336         switch(tmpbyte & 0x30) {
 337                 case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
 338                 case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
 339                 case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
 340                 /* This last case is _NOT_ ok */
 341                 case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
 342         }
 343         return tmpbyte & 0x30;
 344 }
 345
 346 static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 347 {
 348         static struct ata_port_info info = {
 349                 .sht = &sil680_sht,
 350                 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 351                 .pio_mask = 0x1f,
 352                 .mwdma_mask = 0x07,
 353                 .udma_mask = 0x7f,
 354                 .port_ops = &sil680_port_ops
 355         };
 356         static struct ata_port_info info_slow = {
 357                 .sht = &sil680_sht,
 358                 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 359                 .pio_mask = 0x1f,
 360                 .mwdma_mask = 0x07,
 361                 .udma_mask = 0x3f,
 362                 .port_ops = &sil680_port_ops
 363         };
 364         static struct ata_port_info *port_info[2] = {&info, &info};
 365         static int printed_version;
 366
 367         if (!printed_version++)
 368                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 369
 370         switch(sil680_init_chip(pdev))
 371         {
 372                 case 0:
 373                         port_info[0] = port_info[1] = &info_slow;
 374                         break;
 375                 case 0x30:
 376                         return -ENODEV;
 377         }
 378         return ata_pci_init_one(pdev, port_info, 2);
 379 }
 380
 381 #ifdef CONFIG_PM
 382 static int sil680_reinit_one(struct pci_dev *pdev)
 383 {
 384         sil680_init_chip(pdev);
 385         return ata_pci_device_resume(pdev);
 386 }
 387 #endif
 388
 389 static const struct pci_device_id sil680[] = {
 390         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
 391
 392         { },
 393 };
 394
 395 static struct pci_driver sil680_pci_driver = {
 396         .name           = DRV_NAME,
 397         .id_table       = sil680,
 398         .probe          = sil680_init_one,
 399         .remove         = ata_pci_remove_one,
 400 #ifdef CONFIG_PM
 401         .suspend        = ata_pci_device_suspend,
 402         .resume         = sil680_reinit_one,
 403 #endif
 404 };
 405
 406 static int __init sil680_init(void)
 407 {
 408         return pci_register_driver(&sil680_pci_driver);
 409 }
 410
 411 static void __exit sil680_exit(void)
 412 {
 413         pci_unregister_driver(&sil680_pci_driver);
 414 }
 415
 416 MODULE_AUTHOR("Alan Cox");
 417 MODULE_DESCRIPTION("low-level driver for SI680 PATA");
 418 MODULE_LICENSE("GPL");
 419 MODULE_DEVICE_TABLE(pci, sil680);
 420 MODULE_VERSION(DRV_VERSION);
 421
 422 module_init(sil680_init);
 423 module_exit(sil680_exit);