ieee80211: remove last uses of compat define WLAN_CAPABILITY_BSS

[deliverable/linux.git] / drivers / base / bus.c

/*
 * bus.c - bus driver management
 *
 * Copyright (c) 2002-3 Patrick Mochel
 * Copyright (c) 2002-3 Open Source Development Labs
 *
 * This file is released under the GPLv2
 *
 */

#include <linux/config.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
#include "base.h"
#include "power/power.h"

#define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr)
#define to_bus(obj) container_of(obj, struct bus_type, subsys.kset.kobj)

/*
 * sysfs bindings for drivers
 */

#define to_drv_attr(_attr) container_of(_attr, struct driver_attribute, attr)
#define to_driver(obj) container_of(obj, struct device_driver, kobj)


static ssize_t
drv_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
{
        struct driver_attribute * drv_attr = to_drv_attr(attr);
        struct device_driver * drv = to_driver(kobj);
        ssize_t ret = -EIO;

        if (drv_attr->show)
                ret = drv_attr->show(drv, buf);
        return ret;
}

static ssize_t
drv_attr_store(struct kobject * kobj, struct attribute * attr,
               const char * buf, size_t count)
{
        struct driver_attribute * drv_attr = to_drv_attr(attr);
        struct device_driver * drv = to_driver(kobj);
        ssize_t ret = -EIO;

        if (drv_attr->store)
                ret = drv_attr->store(drv, buf, count);
        return ret;
}

static struct sysfs_ops driver_sysfs_ops = {
        .show   = drv_attr_show,
        .store  = drv_attr_store,
};


static void driver_release(struct kobject * kobj)
{
        struct device_driver * drv = to_driver(kobj);
        complete(&drv->unloaded);
}

static struct kobj_type ktype_driver = {
        .sysfs_ops      = &driver_sysfs_ops,
        .release        = driver_release,
};


/*
 * sysfs bindings for buses
 */


static ssize_t
bus_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
{
        struct bus_attribute * bus_attr = to_bus_attr(attr);
        struct bus_type * bus = to_bus(kobj);
        ssize_t ret = 0;

        if (bus_attr->show)
                ret = bus_attr->show(bus, buf);
        return ret;
}

static ssize_t
bus_attr_store(struct kobject * kobj, struct attribute * attr,
               const char * buf, size_t count)
{
        struct bus_attribute * bus_attr = to_bus_attr(attr);
        struct bus_type * bus = to_bus(kobj);
        ssize_t ret = 0;

        if (bus_attr->store)
                ret = bus_attr->store(bus, buf, count);
        return ret;
}

static struct sysfs_ops bus_sysfs_ops = {
        .show   = bus_attr_show,
        .store  = bus_attr_store,
};

int bus_create_file(struct bus_type * bus, struct bus_attribute * attr)
{
        int error;
        if (get_bus(bus)) {
                error = sysfs_create_file(&bus->subsys.kset.kobj, &attr->attr);
                put_bus(bus);
        } else
                error = -EINVAL;
        return error;
}

void bus_remove_file(struct bus_type * bus, struct bus_attribute * attr)
{
        if (get_bus(bus)) {
                sysfs_remove_file(&bus->subsys.kset.kobj, &attr->attr);
                put_bus(bus);
        }
}

static struct kobj_type ktype_bus = {
        .sysfs_ops      = &bus_sysfs_ops,

};

decl_subsys(bus, &ktype_bus, NULL);


/* Manually detach a device from it's associated driver. */
static int driver_helper(struct device *dev, void *data)
{
        const char *name = data;

        if (strcmp(name, dev->bus_id) == 0)
                return 1;
        return 0;
}

static ssize_t driver_unbind(struct device_driver *drv,
                             const char *buf, size_t count)
{
        struct bus_type *bus = get_bus(drv->bus);
        struct device *dev;
        int err = -ENODEV;

        dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
        if ((dev) &&
            (dev->driver == drv)) {
                device_release_driver(dev);
                err = count;
        }
        return err;
}
static DRIVER_ATTR(unbind, S_IWUSR, NULL, driver_unbind);

/*
 * Manually attach a device to a driver.
 * Note: the driver must want to bind to the device,
 * it is not possible to override the driver's id table.
 */
static ssize_t driver_bind(struct device_driver *drv,
                           const char *buf, size_t count)
{
        struct bus_type *bus = get_bus(drv->bus);
        struct device *dev;
        int err = -ENODEV;

        dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
        if ((dev) &&
            (dev->driver == NULL)) {
                down(&dev->sem);
                err = driver_probe_device(drv, dev);
                up(&dev->sem);
                put_device(dev);
        }
        return err;
}
static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);


static struct device * next_device(struct klist_iter * i)
{
        struct klist_node * n = klist_next(i);
        return n ? container_of(n, struct device, knode_bus) : NULL;
}

/**
 *      bus_for_each_dev - device iterator.
 *      @bus:   bus type.
 *      @start: device to start iterating from.
 *      @data:  data for the callback.
 *      @fn:    function to be called for each device.
 *
 *      Iterate over @bus's list of devices, and call @fn for each,
 *      passing it @data. If @start is not NULL, we use that device to
 *      begin iterating from.
 *
 *      We check the return of @fn each time. If it returns anything
 *      other than 0, we break out and return that value.
 *
 *      NOTE: The device that returns a non-zero value is not retained
 *      in any way, nor is its refcount incremented. If the caller needs
 *      to retain this data, it should do, and increment the reference
 *      count in the supplied callback.
 */

int bus_for_each_dev(struct bus_type * bus, struct device * start,
                     void * data, int (*fn)(struct device *, void *))
{
        struct klist_iter i;
        struct device * dev;
        int error = 0;

        if (!bus)
                return -EINVAL;

        klist_iter_init_node(&bus->klist_devices, &i,
                             (start ? &start->knode_bus : NULL));
        while ((dev = next_device(&i)) && !error)
                error = fn(dev, data);
        klist_iter_exit(&i);
        return error;
}

/**
 * bus_find_device - device iterator for locating a particular device.
 * @bus: bus type
 * @start: Device to begin with
 * @data: Data to pass to match function
 * @match: Callback function to check device
 *
 * This is similar to the bus_for_each_dev() function above, but it
 * returns a reference to a device that is 'found' for later use, as
 * determined by the @match callback.
 *
 * The callback should return 0 if the device doesn't match and non-zero
 * if it does.  If the callback returns non-zero, this function will
 * return to the caller and not iterate over any more devices.
 */
struct device * bus_find_device(struct bus_type *bus,
                                struct device *start, void *data,
                                int (*match)(struct device *, void *))
{
        struct klist_iter i;
        struct device *dev;

        if (!bus)
                return NULL;

        klist_iter_init_node(&bus->klist_devices, &i,
                             (start ? &start->knode_bus : NULL));
        while ((dev = next_device(&i)))
                if (match(dev, data) && get_device(dev))
                        break;
        klist_iter_exit(&i);
        return dev;
}


static struct device_driver * next_driver(struct klist_iter * i)
{
        struct klist_node * n = klist_next(i);
        return n ? container_of(n, struct device_driver, knode_bus) : NULL;
}

/**
 *      bus_for_each_drv - driver iterator
 *      @bus:   bus we're dealing with.
 *      @start: driver to start iterating on.
 *      @data:  data to pass to the callback.
 *      @fn:    function to call for each driver.
 *
 *      This is nearly identical to the device iterator above.
 *      We iterate over each driver that belongs to @bus, and call
 *      @fn for each. If @fn returns anything but 0, we break out
 *      and return it. If @start is not NULL, we use it as the head
 *      of the list.
 *
 *      NOTE: we don't return the driver that returns a non-zero
 *      value, nor do we leave the reference count incremented for that
 *      driver. If the caller needs to know that info, it must set it
 *      in the callback. It must also be sure to increment the refcount
 *      so it doesn't disappear before returning to the caller.
 */

int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
                     void * data, int (*fn)(struct device_driver *, void *))
{
        struct klist_iter i;
        struct device_driver * drv;
        int error = 0;

        if (!bus)
                return -EINVAL;

        klist_iter_init_node(&bus->klist_drivers, &i,
                             start ? &start->knode_bus : NULL);
        while ((drv = next_driver(&i)) && !error)
                error = fn(drv, data);
        klist_iter_exit(&i);
        return error;
}

static int device_add_attrs(struct bus_type * bus, struct device * dev)
{
        int error = 0;
        int i;

        if (bus->dev_attrs) {
                for (i = 0; attr_name(bus->dev_attrs[i]); i++) {
                        error = device_create_file(dev,&bus->dev_attrs[i]);
                        if (error)
                                goto Err;
                }
        }
 Done:
        return error;
 Err:
        while (--i >= 0)
                device_remove_file(dev,&bus->dev_attrs[i]);
        goto Done;
}


static void device_remove_attrs(struct bus_type * bus, struct device * dev)
{
        int i;

        if (bus->dev_attrs) {
                for (i = 0; attr_name(bus->dev_attrs[i]); i++)
                        device_remove_file(dev,&bus->dev_attrs[i]);
        }
}


/**
 *      bus_add_device - add device to bus
 *      @dev:   device being added
 *
 *      - Add the device to its bus's list of devices.
 *      - Try to attach to driver.
 *      - Create link to device's physical location.
 */
int bus_add_device(struct device * dev)
{
        struct bus_type * bus = get_bus(dev->bus);
        int error = 0;

        if (bus) {
                pr_debug("bus %s: add device %s\n", bus->name, dev->bus_id);
                device_attach(dev);
                klist_add_tail(&bus->klist_devices, &dev->knode_bus);
                error = device_add_attrs(bus, dev);
                if (!error) {
                        sysfs_create_link(&bus->devices.kobj, &dev->kobj, dev->bus_id);
                        sysfs_create_link(&dev->kobj, &dev->bus->subsys.kset.kobj, "bus");
                }
        }
        return error;
}

/**
 *      bus_remove_device - remove device from bus
 *      @dev:   device to be removed
 *
 *      - Remove symlink from bus's directory.
 *      - Delete device from bus's list.
 *      - Detach from its driver.
 *      - Drop reference taken in bus_add_device().
 */
void bus_remove_device(struct device * dev)
{
        if (dev->bus) {
                sysfs_remove_link(&dev->kobj, "bus");
                sysfs_remove_link(&dev->bus->devices.kobj, dev->bus_id);
                device_remove_attrs(dev->bus, dev);
                klist_remove(&dev->knode_bus);
                pr_debug("bus %s: remove device %s\n", dev->bus->name, dev->bus_id);
                device_release_driver(dev);
                put_bus(dev->bus);
        }
}

static int driver_add_attrs(struct bus_type * bus, struct device_driver * drv)
{
        int error = 0;
        int i;

        if (bus->drv_attrs) {
                for (i = 0; attr_name(bus->drv_attrs[i]); i++) {
                        error = driver_create_file(drv, &bus->drv_attrs[i]);
                        if (error)
                                goto Err;
                }
        }
 Done:
        return error;
 Err:
        while (--i >= 0)
                driver_remove_file(drv, &bus->drv_attrs[i]);
        goto Done;
}


static void driver_remove_attrs(struct bus_type * bus, struct device_driver * drv)
{
        int i;

        if (bus->drv_attrs) {
                for (i = 0; attr_name(bus->drv_attrs[i]); i++)
                        driver_remove_file(drv, &bus->drv_attrs[i]);
        }
}


/**
 *      bus_add_driver - Add a driver to the bus.
 *      @drv:   driver.
 *
 */
int bus_add_driver(struct device_driver * drv)
{
        struct bus_type * bus = get_bus(drv->bus);
        int error = 0;

        if (bus) {
                pr_debug("bus %s: add driver %s\n", bus->name, drv->name);
                error = kobject_set_name(&drv->kobj, "%s", drv->name);
                if (error) {
                        put_bus(bus);
                        return error;
                }
                drv->kobj.kset = &bus->drivers;
                if ((error = kobject_register(&drv->kobj))) {
                        put_bus(bus);
                        return error;
                }

                driver_attach(drv);
                klist_add_tail(&bus->klist_drivers, &drv->knode_bus);
                module_add_driver(drv->owner, drv);

                driver_add_attrs(bus, drv);
                driver_create_file(drv, &driver_attr_unbind);
                driver_create_file(drv, &driver_attr_bind);
        }
        return error;
}


/**
 *      bus_remove_driver - delete driver from bus's knowledge.
 *      @drv:   driver.
 *
 *      Detach the driver from the devices it controls, and remove
 *      it from its bus's list of drivers. Finally, we drop the reference
 *      to the bus we took in bus_add_driver().
 */

void bus_remove_driver(struct device_driver * drv)
{
        if (drv->bus) {
                driver_remove_file(drv, &driver_attr_bind);
                driver_remove_file(drv, &driver_attr_unbind);
                driver_remove_attrs(drv->bus, drv);
                klist_remove(&drv->knode_bus);
                pr_debug("bus %s: remove driver %s\n", drv->bus->name, drv->name);
                driver_detach(drv);
                module_remove_driver(drv);
                kobject_unregister(&drv->kobj);
                put_bus(drv->bus);
        }
}


/* Helper for bus_rescan_devices's iter */
static int bus_rescan_devices_helper(struct device *dev, void *data)
{
        if (!dev->driver)
                device_attach(dev);
        return 0;
}

/**
 * bus_rescan_devices - rescan devices on the bus for possible drivers
 * @bus: the bus to scan.
 *
 * This function will look for devices on the bus with no driver
 * attached and rescan it against existing drivers to see if it matches
 * any by calling device_attach() for the unbound devices.
 */
void bus_rescan_devices(struct bus_type * bus)
{
        bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper);
}


struct bus_type * get_bus(struct bus_type * bus)
{
        return bus ? container_of(subsys_get(&bus->subsys), struct bus_type, subsys) : NULL;
}

void put_bus(struct bus_type * bus)
{
        subsys_put(&bus->subsys);
}


/**
 *      find_bus - locate bus by name.
 *      @name:  name of bus.
 *
 *      Call kset_find_obj() to iterate over list of buses to
 *      find a bus by name. Return bus if found.
 *
 *      Note that kset_find_obj increments bus' reference count.
 */

struct bus_type * find_bus(char * name)
{
        struct kobject * k = kset_find_obj(&bus_subsys.kset, name);
        return k ? to_bus(k) : NULL;
}


/**
 *      bus_add_attrs - Add default attributes for this bus.
 *      @bus:   Bus that has just been registered.
 */

static int bus_add_attrs(struct bus_type * bus)
{
        int error = 0;
        int i;

        if (bus->bus_attrs) {
                for (i = 0; attr_name(bus->bus_attrs[i]); i++) {
                        if ((error = bus_create_file(bus,&bus->bus_attrs[i])))
                                goto Err;
                }
        }
 Done:
        return error;
 Err:
        while (--i >= 0)
                bus_remove_file(bus,&bus->bus_attrs[i]);
        goto Done;
}

static void bus_remove_attrs(struct bus_type * bus)
{
        int i;

        if (bus->bus_attrs) {
                for (i = 0; attr_name(bus->bus_attrs[i]); i++)
                        bus_remove_file(bus,&bus->bus_attrs[i]);
        }
}

/**
 *      bus_register - register a bus with the system.
 *      @bus:   bus.
 *
 *      Once we have that, we registered the bus with the kobject
 *      infrastructure, then register the children subsystems it has:
 *      the devices and drivers that belong to the bus.
 */
int bus_register(struct bus_type * bus)
{
        int retval;

        retval = kobject_set_name(&bus->subsys.kset.kobj, "%s", bus->name);
        if (retval)
                goto out;

        subsys_set_kset(bus, bus_subsys);
        retval = subsystem_register(&bus->subsys);
        if (retval)
                goto out;

        kobject_set_name(&bus->devices.kobj, "devices");
        bus->devices.subsys = &bus->subsys;
        retval = kset_register(&bus->devices);
        if (retval)
                goto bus_devices_fail;

        kobject_set_name(&bus->drivers.kobj, "drivers");
        bus->drivers.subsys = &bus->subsys;
        bus->drivers.ktype = &ktype_driver;
        retval = kset_register(&bus->drivers);
        if (retval)
                goto bus_drivers_fail;

        klist_init(&bus->klist_devices);
        klist_init(&bus->klist_drivers);
        bus_add_attrs(bus);

        pr_debug("bus type '%s' registered\n", bus->name);
        return 0;

bus_drivers_fail:
        kset_unregister(&bus->devices);
bus_devices_fail:
        subsystem_unregister(&bus->subsys);
out:
        return retval;
}


/**
 *      bus_unregister - remove a bus from the system
 *      @bus:   bus.
 *
 *      Unregister the child subsystems and the bus itself.
 *      Finally, we call put_bus() to release the refcount
 */
void bus_unregister(struct bus_type * bus)
{
        pr_debug("bus %s: unregistering\n", bus->name);
        bus_remove_attrs(bus);
        kset_unregister(&bus->drivers);
        kset_unregister(&bus->devices);
        subsystem_unregister(&bus->subsys);
}

int __init buses_init(void)
{
        return subsystem_register(&bus_subsys);
}


EXPORT_SYMBOL_GPL(bus_for_each_dev);
EXPORT_SYMBOL_GPL(bus_find_device);
EXPORT_SYMBOL_GPL(bus_for_each_drv);

EXPORT_SYMBOL_GPL(bus_add_device);
EXPORT_SYMBOL_GPL(bus_remove_device);
EXPORT_SYMBOL_GPL(bus_register);
EXPORT_SYMBOL_GPL(bus_unregister);
EXPORT_SYMBOL_GPL(bus_rescan_devices);
EXPORT_SYMBOL_GPL(get_bus);
EXPORT_SYMBOL_GPL(put_bus);
EXPORT_SYMBOL_GPL(find_bus);

EXPORT_SYMBOL_GPL(bus_create_file);
EXPORT_SYMBOL_GPL(bus_remove_file);