2 * Disk Array driver for HP Smart Array controllers.
3 * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
23 #include <linux/module.h>
24 #include <linux/interrupt.h>
25 #include <linux/types.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/smp_lock.h>
30 #include <linux/delay.h>
31 #include <linux/major.h>
33 #include <linux/bio.h>
34 #include <linux/blkpg.h>
35 #include <linux/timer.h>
36 #include <linux/proc_fs.h>
37 #include <linux/seq_file.h>
38 #include <linux/init.h>
39 #include <linux/jiffies.h>
40 #include <linux/hdreg.h>
41 #include <linux/spinlock.h>
42 #include <linux/compat.h>
43 #include <linux/mutex.h>
44 #include <asm/uaccess.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/blkdev.h>
49 #include <linux/genhd.h>
50 #include <linux/completion.h>
51 #include <scsi/scsi.h>
53 #include <scsi/scsi_ioctl.h>
54 #include <linux/cdrom.h>
55 #include <linux/scatterlist.h>
56 #include <linux/kthread.h>
58 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
59 #define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
60 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
62 /* Embedded module documentation macros - see modules.h */
63 MODULE_AUTHOR("Hewlett-Packard Company");
64 MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
65 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
66 " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
67 " Smart Array G2 Series SAS/SATA Controllers");
68 MODULE_VERSION("3.6.20");
69 MODULE_LICENSE("GPL");
71 #include "cciss_cmd.h"
73 #include <linux/cciss_ioctl.h>
75 /* define the PCI info for the cards we can control */
76 static const struct pci_device_id cciss_pci_device_id
[] = {
77 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISS
, 0x0E11, 0x4070},
78 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4080},
79 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4082},
80 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4083},
81 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x4091},
82 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409A},
83 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409B},
84 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409C},
85 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409D},
86 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSA
, 0x103C, 0x3225},
87 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3223},
88 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3234},
89 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3235},
90 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3211},
91 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3212},
92 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3213},
93 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3214},
94 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3215},
95 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3237},
96 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x323D},
97 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3241},
98 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3243},
99 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3245},
100 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3247},
101 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3249},
102 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324A},
103 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324B},
104 {PCI_VENDOR_ID_HP
, PCI_ANY_ID
, PCI_ANY_ID
, PCI_ANY_ID
,
105 PCI_CLASS_STORAGE_RAID
<< 8, 0xffff << 8, 0},
109 MODULE_DEVICE_TABLE(pci
, cciss_pci_device_id
);
111 /* board_id = Subsystem Device ID & Vendor ID
112 * product = Marketing Name for the board
113 * access = Address of the struct of function pointers
115 static struct board_type products
[] = {
116 {0x40700E11, "Smart Array 5300", &SA5_access
},
117 {0x40800E11, "Smart Array 5i", &SA5B_access
},
118 {0x40820E11, "Smart Array 532", &SA5B_access
},
119 {0x40830E11, "Smart Array 5312", &SA5B_access
},
120 {0x409A0E11, "Smart Array 641", &SA5_access
},
121 {0x409B0E11, "Smart Array 642", &SA5_access
},
122 {0x409C0E11, "Smart Array 6400", &SA5_access
},
123 {0x409D0E11, "Smart Array 6400 EM", &SA5_access
},
124 {0x40910E11, "Smart Array 6i", &SA5_access
},
125 {0x3225103C, "Smart Array P600", &SA5_access
},
126 {0x3223103C, "Smart Array P800", &SA5_access
},
127 {0x3234103C, "Smart Array P400", &SA5_access
},
128 {0x3235103C, "Smart Array P400i", &SA5_access
},
129 {0x3211103C, "Smart Array E200i", &SA5_access
},
130 {0x3212103C, "Smart Array E200", &SA5_access
},
131 {0x3213103C, "Smart Array E200i", &SA5_access
},
132 {0x3214103C, "Smart Array E200i", &SA5_access
},
133 {0x3215103C, "Smart Array E200i", &SA5_access
},
134 {0x3237103C, "Smart Array E500", &SA5_access
},
135 {0x323D103C, "Smart Array P700m", &SA5_access
},
136 {0x3241103C, "Smart Array P212", &SA5_access
},
137 {0x3243103C, "Smart Array P410", &SA5_access
},
138 {0x3245103C, "Smart Array P410i", &SA5_access
},
139 {0x3247103C, "Smart Array P411", &SA5_access
},
140 {0x3249103C, "Smart Array P812", &SA5_access
},
141 {0x324A103C, "Smart Array P712m", &SA5_access
},
142 {0x324B103C, "Smart Array P711m", &SA5_access
},
143 {0xFFFF103C, "Unknown Smart Array", &SA5_access
},
146 /* How long to wait (in milliseconds) for board to go into simple mode */
147 #define MAX_CONFIG_WAIT 30000
148 #define MAX_IOCTL_CONFIG_WAIT 1000
150 /*define how many times we will try a command because of bus resets */
151 #define MAX_CMD_RETRIES 3
155 /* Originally cciss driver only supports 8 major numbers */
156 #define MAX_CTLR_ORIG 8
158 static ctlr_info_t
*hba
[MAX_CTLR
];
160 static struct task_struct
*cciss_scan_thread
;
161 static DEFINE_MUTEX(scan_mutex
);
162 static LIST_HEAD(scan_q
);
164 static void do_cciss_request(struct request_queue
*q
);
165 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
);
166 static int cciss_open(struct block_device
*bdev
, fmode_t mode
);
167 static int cciss_release(struct gendisk
*disk
, fmode_t mode
);
168 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
169 unsigned int cmd
, unsigned long arg
);
170 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
);
172 static int cciss_revalidate(struct gendisk
*disk
);
173 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
, int via_ioctl
);
174 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
175 int clear_all
, int via_ioctl
);
177 static void cciss_read_capacity(int ctlr
, int logvol
, int withirq
,
178 sector_t
*total_size
, unsigned int *block_size
);
179 static void cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
,
180 sector_t
*total_size
, unsigned int *block_size
);
181 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
182 int withirq
, sector_t total_size
,
183 unsigned int block_size
, InquiryData_struct
*inq_buff
,
184 drive_info_struct
*drv
);
185 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*, struct pci_dev
*,
187 static void start_io(ctlr_info_t
*h
);
188 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
189 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
);
190 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
191 __u8 page_code
, unsigned char scsi3addr
[],
193 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
195 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
);
197 static void fail_all_cmds(unsigned long ctlr
);
198 static int add_to_scan_list(struct ctlr_info
*h
);
199 static int scan_thread(void *data
);
200 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
);
201 static void cciss_hba_release(struct device
*dev
);
202 static void cciss_device_release(struct device
*dev
);
203 static void cciss_free_gendisk(ctlr_info_t
*h
, int drv_index
);
204 static void cciss_free_drive_info(ctlr_info_t
*h
, int drv_index
);
206 #ifdef CONFIG_PROC_FS
207 static void cciss_procinit(int i
);
209 static void cciss_procinit(int i
)
212 #endif /* CONFIG_PROC_FS */
215 static int cciss_compat_ioctl(struct block_device
*, fmode_t
,
216 unsigned, unsigned long);
219 static const struct block_device_operations cciss_fops
= {
220 .owner
= THIS_MODULE
,
222 .release
= cciss_release
,
223 .locked_ioctl
= cciss_ioctl
,
224 .getgeo
= cciss_getgeo
,
226 .compat_ioctl
= cciss_compat_ioctl
,
228 .revalidate_disk
= cciss_revalidate
,
232 * Enqueuing and dequeuing functions for cmdlists.
234 static inline void addQ(struct hlist_head
*list
, CommandList_struct
*c
)
236 hlist_add_head(&c
->list
, list
);
239 static inline void removeQ(CommandList_struct
*c
)
242 * After kexec/dump some commands might still
243 * be in flight, which the firmware will try
244 * to complete. Resetting the firmware doesn't work
245 * with old fw revisions, so we have to mark
246 * them off as 'stale' to prevent the driver from
249 if (WARN_ON(hlist_unhashed(&c
->list
))) {
250 c
->cmd_type
= CMD_MSG_STALE
;
254 hlist_del_init(&c
->list
);
257 #include "cciss_scsi.c" /* For SCSI tape support */
259 #ifdef CONFIG_PROC_FS
262 * Report information about this controller.
264 #define ENG_GIG 1000000000
265 #define ENG_GIG_FACTOR (ENG_GIG/512)
266 #define ENGAGE_SCSI "engage scsi"
267 static const char *raid_label
[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
270 #define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
272 static struct proc_dir_entry
*proc_cciss
;
274 static void cciss_seq_show_header(struct seq_file
*seq
)
276 ctlr_info_t
*h
= seq
->private;
278 seq_printf(seq
, "%s: HP %s Controller\n"
279 "Board ID: 0x%08lx\n"
280 "Firmware Version: %c%c%c%c\n"
282 "Logical drives: %d\n"
283 "Current Q depth: %d\n"
284 "Current # commands on controller: %d\n"
285 "Max Q depth since init: %d\n"
286 "Max # commands on controller since init: %d\n"
287 "Max SG entries since init: %d\n",
290 (unsigned long)h
->board_id
,
291 h
->firm_ver
[0], h
->firm_ver
[1], h
->firm_ver
[2],
292 h
->firm_ver
[3], (unsigned int)h
->intr
[SIMPLE_MODE_INT
],
294 h
->Qdepth
, h
->commands_outstanding
,
295 h
->maxQsinceinit
, h
->max_outstanding
, h
->maxSG
);
297 #ifdef CONFIG_CISS_SCSI_TAPE
298 cciss_seq_tape_report(seq
, h
->ctlr
);
299 #endif /* CONFIG_CISS_SCSI_TAPE */
302 static void *cciss_seq_start(struct seq_file
*seq
, loff_t
*pos
)
304 ctlr_info_t
*h
= seq
->private;
305 unsigned ctlr
= h
->ctlr
;
308 /* prevent displaying bogus info during configuration
309 * or deconfiguration of a logical volume
311 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
312 if (h
->busy_configuring
) {
313 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
314 return ERR_PTR(-EBUSY
);
316 h
->busy_configuring
= 1;
317 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
320 cciss_seq_show_header(seq
);
325 static int cciss_seq_show(struct seq_file
*seq
, void *v
)
327 sector_t vol_sz
, vol_sz_frac
;
328 ctlr_info_t
*h
= seq
->private;
329 unsigned ctlr
= h
->ctlr
;
331 drive_info_struct
*drv
= h
->drv
[*pos
];
333 if (*pos
> h
->highest_lun
)
339 vol_sz
= drv
->nr_blocks
;
340 vol_sz_frac
= sector_div(vol_sz
, ENG_GIG_FACTOR
);
342 sector_div(vol_sz_frac
, ENG_GIG_FACTOR
);
344 if (drv
->raid_level
< 0 || drv
->raid_level
> RAID_UNKNOWN
)
345 drv
->raid_level
= RAID_UNKNOWN
;
346 seq_printf(seq
, "cciss/c%dd%d:"
347 "\t%4u.%02uGB\tRAID %s\n",
348 ctlr
, (int) *pos
, (int)vol_sz
, (int)vol_sz_frac
,
349 raid_label
[drv
->raid_level
]);
353 static void *cciss_seq_next(struct seq_file
*seq
, void *v
, loff_t
*pos
)
355 ctlr_info_t
*h
= seq
->private;
357 if (*pos
> h
->highest_lun
)
364 static void cciss_seq_stop(struct seq_file
*seq
, void *v
)
366 ctlr_info_t
*h
= seq
->private;
368 /* Only reset h->busy_configuring if we succeeded in setting
369 * it during cciss_seq_start. */
370 if (v
== ERR_PTR(-EBUSY
))
373 h
->busy_configuring
= 0;
376 static const struct seq_operations cciss_seq_ops
= {
377 .start
= cciss_seq_start
,
378 .show
= cciss_seq_show
,
379 .next
= cciss_seq_next
,
380 .stop
= cciss_seq_stop
,
383 static int cciss_seq_open(struct inode
*inode
, struct file
*file
)
385 int ret
= seq_open(file
, &cciss_seq_ops
);
386 struct seq_file
*seq
= file
->private_data
;
389 seq
->private = PDE(inode
)->data
;
395 cciss_proc_write(struct file
*file
, const char __user
*buf
,
396 size_t length
, loff_t
*ppos
)
401 #ifndef CONFIG_CISS_SCSI_TAPE
405 if (!buf
|| length
> PAGE_SIZE
- 1)
408 buffer
= (char *)__get_free_page(GFP_KERNEL
);
413 if (copy_from_user(buffer
, buf
, length
))
415 buffer
[length
] = '\0';
417 #ifdef CONFIG_CISS_SCSI_TAPE
418 if (strncmp(ENGAGE_SCSI
, buffer
, sizeof ENGAGE_SCSI
- 1) == 0) {
419 struct seq_file
*seq
= file
->private_data
;
420 ctlr_info_t
*h
= seq
->private;
423 rc
= cciss_engage_scsi(h
->ctlr
);
429 #endif /* CONFIG_CISS_SCSI_TAPE */
431 /* might be nice to have "disengage" too, but it's not
432 safely possible. (only 1 module use count, lock issues.) */
435 free_page((unsigned long)buffer
);
439 static struct file_operations cciss_proc_fops
= {
440 .owner
= THIS_MODULE
,
441 .open
= cciss_seq_open
,
444 .release
= seq_release
,
445 .write
= cciss_proc_write
,
448 static void __devinit
cciss_procinit(int i
)
450 struct proc_dir_entry
*pde
;
452 if (proc_cciss
== NULL
)
453 proc_cciss
= proc_mkdir("driver/cciss", NULL
);
456 pde
= proc_create_data(hba
[i
]->devname
, S_IWUSR
| S_IRUSR
| S_IRGRP
|
458 &cciss_proc_fops
, hba
[i
]);
460 #endif /* CONFIG_PROC_FS */
462 #define MAX_PRODUCT_NAME_LEN 19
464 #define to_hba(n) container_of(n, struct ctlr_info, dev)
465 #define to_drv(n) container_of(n, drive_info_struct, dev)
467 static ssize_t
host_store_rescan(struct device
*dev
,
468 struct device_attribute
*attr
,
469 const char *buf
, size_t count
)
471 struct ctlr_info
*h
= to_hba(dev
);
474 wake_up_process(cciss_scan_thread
);
475 wait_for_completion_interruptible(&h
->scan_wait
);
479 DEVICE_ATTR(rescan
, S_IWUSR
, NULL
, host_store_rescan
);
481 static ssize_t
dev_show_unique_id(struct device
*dev
,
482 struct device_attribute
*attr
,
485 drive_info_struct
*drv
= to_drv(dev
);
486 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
491 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
492 if (h
->busy_configuring
)
495 memcpy(sn
, drv
->serial_no
, sizeof(sn
));
496 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
501 return snprintf(buf
, 16 * 2 + 2,
502 "%02X%02X%02X%02X%02X%02X%02X%02X"
503 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
504 sn
[0], sn
[1], sn
[2], sn
[3],
505 sn
[4], sn
[5], sn
[6], sn
[7],
506 sn
[8], sn
[9], sn
[10], sn
[11],
507 sn
[12], sn
[13], sn
[14], sn
[15]);
509 DEVICE_ATTR(unique_id
, S_IRUGO
, dev_show_unique_id
, NULL
);
511 static ssize_t
dev_show_vendor(struct device
*dev
,
512 struct device_attribute
*attr
,
515 drive_info_struct
*drv
= to_drv(dev
);
516 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
517 char vendor
[VENDOR_LEN
+ 1];
521 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
522 if (h
->busy_configuring
)
525 memcpy(vendor
, drv
->vendor
, VENDOR_LEN
+ 1);
526 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
531 return snprintf(buf
, sizeof(vendor
) + 1, "%s\n", drv
->vendor
);
533 DEVICE_ATTR(vendor
, S_IRUGO
, dev_show_vendor
, NULL
);
535 static ssize_t
dev_show_model(struct device
*dev
,
536 struct device_attribute
*attr
,
539 drive_info_struct
*drv
= to_drv(dev
);
540 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
541 char model
[MODEL_LEN
+ 1];
545 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
546 if (h
->busy_configuring
)
549 memcpy(model
, drv
->model
, MODEL_LEN
+ 1);
550 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
555 return snprintf(buf
, sizeof(model
) + 1, "%s\n", drv
->model
);
557 DEVICE_ATTR(model
, S_IRUGO
, dev_show_model
, NULL
);
559 static ssize_t
dev_show_rev(struct device
*dev
,
560 struct device_attribute
*attr
,
563 drive_info_struct
*drv
= to_drv(dev
);
564 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
565 char rev
[REV_LEN
+ 1];
569 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
570 if (h
->busy_configuring
)
573 memcpy(rev
, drv
->rev
, REV_LEN
+ 1);
574 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
579 return snprintf(buf
, sizeof(rev
) + 1, "%s\n", drv
->rev
);
581 DEVICE_ATTR(rev
, S_IRUGO
, dev_show_rev
, NULL
);
583 static ssize_t
cciss_show_lunid(struct device
*dev
,
584 struct device_attribute
*attr
, char *buf
)
586 drive_info_struct
*drv
= to_drv(dev
);
587 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
589 unsigned char lunid
[8];
591 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
592 if (h
->busy_configuring
) {
593 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
597 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
600 memcpy(lunid
, drv
->LunID
, sizeof(lunid
));
601 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
602 return snprintf(buf
, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
603 lunid
[0], lunid
[1], lunid
[2], lunid
[3],
604 lunid
[4], lunid
[5], lunid
[6], lunid
[7]);
606 DEVICE_ATTR(lunid
, S_IRUGO
, cciss_show_lunid
, NULL
);
608 static ssize_t
cciss_show_raid_level(struct device
*dev
,
609 struct device_attribute
*attr
, char *buf
)
611 drive_info_struct
*drv
= to_drv(dev
);
612 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
616 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
617 if (h
->busy_configuring
) {
618 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
621 raid
= drv
->raid_level
;
622 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
623 if (raid
< 0 || raid
> RAID_UNKNOWN
)
626 return snprintf(buf
, strlen(raid_label
[raid
]) + 7, "RAID %s\n",
629 DEVICE_ATTR(raid_level
, S_IRUGO
, cciss_show_raid_level
, NULL
);
631 static ssize_t
cciss_show_usage_count(struct device
*dev
,
632 struct device_attribute
*attr
, char *buf
)
634 drive_info_struct
*drv
= to_drv(dev
);
635 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
639 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
640 if (h
->busy_configuring
) {
641 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
644 count
= drv
->usage_count
;
645 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
646 return snprintf(buf
, 20, "%d\n", count
);
648 DEVICE_ATTR(usage_count
, S_IRUGO
, cciss_show_usage_count
, NULL
);
650 static struct attribute
*cciss_host_attrs
[] = {
651 &dev_attr_rescan
.attr
,
655 static struct attribute_group cciss_host_attr_group
= {
656 .attrs
= cciss_host_attrs
,
659 static struct attribute_group
*cciss_host_attr_groups
[] = {
660 &cciss_host_attr_group
,
664 static struct device_type cciss_host_type
= {
665 .name
= "cciss_host",
666 .groups
= cciss_host_attr_groups
,
667 .release
= cciss_hba_release
,
670 static struct attribute
*cciss_dev_attrs
[] = {
671 &dev_attr_unique_id
.attr
,
672 &dev_attr_model
.attr
,
673 &dev_attr_vendor
.attr
,
675 &dev_attr_lunid
.attr
,
676 &dev_attr_raid_level
.attr
,
677 &dev_attr_usage_count
.attr
,
681 static struct attribute_group cciss_dev_attr_group
= {
682 .attrs
= cciss_dev_attrs
,
685 static const struct attribute_group
*cciss_dev_attr_groups
[] = {
686 &cciss_dev_attr_group
,
690 static struct device_type cciss_dev_type
= {
691 .name
= "cciss_device",
692 .groups
= cciss_dev_attr_groups
,
693 .release
= cciss_device_release
,
696 static struct bus_type cciss_bus_type
= {
701 * cciss_hba_release is called when the reference count
702 * of h->dev goes to zero.
704 static void cciss_hba_release(struct device
*dev
)
707 * nothing to do, but need this to avoid a warning
708 * about not having a release handler from lib/kref.c.
713 * Initialize sysfs entry for each controller. This sets up and registers
714 * the 'cciss#' directory for each individual controller under
715 * /sys/bus/pci/devices/<dev>/.
717 static int cciss_create_hba_sysfs_entry(struct ctlr_info
*h
)
719 device_initialize(&h
->dev
);
720 h
->dev
.type
= &cciss_host_type
;
721 h
->dev
.bus
= &cciss_bus_type
;
722 dev_set_name(&h
->dev
, "%s", h
->devname
);
723 h
->dev
.parent
= &h
->pdev
->dev
;
725 return device_add(&h
->dev
);
729 * Remove sysfs entries for an hba.
731 static void cciss_destroy_hba_sysfs_entry(struct ctlr_info
*h
)
734 put_device(&h
->dev
); /* final put. */
737 /* cciss_device_release is called when the reference count
738 * of h->drv[x]dev goes to zero.
740 static void cciss_device_release(struct device
*dev
)
742 drive_info_struct
*drv
= to_drv(dev
);
747 * Initialize sysfs for each logical drive. This sets up and registers
748 * the 'c#d#' directory for each individual logical drive under
749 * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
750 * /sys/block/cciss!c#d# to this entry.
752 static long cciss_create_ld_sysfs_entry(struct ctlr_info
*h
,
757 if (h
->drv
[drv_index
]->device_initialized
)
760 dev
= &h
->drv
[drv_index
]->dev
;
761 device_initialize(dev
);
762 dev
->type
= &cciss_dev_type
;
763 dev
->bus
= &cciss_bus_type
;
764 dev_set_name(dev
, "c%dd%d", h
->ctlr
, drv_index
);
765 dev
->parent
= &h
->dev
;
766 h
->drv
[drv_index
]->device_initialized
= 1;
767 return device_add(dev
);
771 * Remove sysfs entries for a logical drive.
773 static void cciss_destroy_ld_sysfs_entry(struct ctlr_info
*h
, int drv_index
,
776 struct device
*dev
= &h
->drv
[drv_index
]->dev
;
778 /* special case for c*d0, we only destroy it on controller exit */
779 if (drv_index
== 0 && !ctlr_exiting
)
783 put_device(dev
); /* the "final" put. */
784 h
->drv
[drv_index
] = NULL
;
788 * For operations that cannot sleep, a command block is allocated at init,
789 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
790 * which ones are free or in use. For operations that can wait for kmalloc
791 * to possible sleep, this routine can be called with get_from_pool set to 0.
792 * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
794 static CommandList_struct
*cmd_alloc(ctlr_info_t
*h
, int get_from_pool
)
796 CommandList_struct
*c
;
799 dma_addr_t cmd_dma_handle
, err_dma_handle
;
801 if (!get_from_pool
) {
802 c
= (CommandList_struct
*) pci_alloc_consistent(h
->pdev
,
803 sizeof(CommandList_struct
), &cmd_dma_handle
);
806 memset(c
, 0, sizeof(CommandList_struct
));
810 c
->err_info
= (ErrorInfo_struct
*)
811 pci_alloc_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
814 if (c
->err_info
== NULL
) {
815 pci_free_consistent(h
->pdev
,
816 sizeof(CommandList_struct
), c
, cmd_dma_handle
);
819 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
820 } else { /* get it out of the controllers pool */
823 i
= find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
);
826 } while (test_and_set_bit
827 (i
& (BITS_PER_LONG
- 1),
828 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
)) != 0);
830 printk(KERN_DEBUG
"cciss: using command buffer %d\n", i
);
833 memset(c
, 0, sizeof(CommandList_struct
));
834 cmd_dma_handle
= h
->cmd_pool_dhandle
835 + i
* sizeof(CommandList_struct
);
836 c
->err_info
= h
->errinfo_pool
+ i
;
837 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
838 err_dma_handle
= h
->errinfo_pool_dhandle
839 + i
* sizeof(ErrorInfo_struct
);
845 INIT_HLIST_NODE(&c
->list
);
846 c
->busaddr
= (__u32
) cmd_dma_handle
;
847 temp64
.val
= (__u64
) err_dma_handle
;
848 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
849 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
850 c
->ErrDesc
.Len
= sizeof(ErrorInfo_struct
);
857 * Frees a command block that was previously allocated with cmd_alloc().
859 static void cmd_free(ctlr_info_t
*h
, CommandList_struct
*c
, int got_from_pool
)
864 if (!got_from_pool
) {
865 temp64
.val32
.lower
= c
->ErrDesc
.Addr
.lower
;
866 temp64
.val32
.upper
= c
->ErrDesc
.Addr
.upper
;
867 pci_free_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
868 c
->err_info
, (dma_addr_t
) temp64
.val
);
869 pci_free_consistent(h
->pdev
, sizeof(CommandList_struct
),
870 c
, (dma_addr_t
) c
->busaddr
);
873 clear_bit(i
& (BITS_PER_LONG
- 1),
874 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
));
879 static inline ctlr_info_t
*get_host(struct gendisk
*disk
)
881 return disk
->queue
->queuedata
;
884 static inline drive_info_struct
*get_drv(struct gendisk
*disk
)
886 return disk
->private_data
;
890 * Open. Make sure the device is really there.
892 static int cciss_open(struct block_device
*bdev
, fmode_t mode
)
894 ctlr_info_t
*host
= get_host(bdev
->bd_disk
);
895 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
898 printk(KERN_DEBUG
"cciss_open %s\n", bdev
->bd_disk
->disk_name
);
899 #endif /* CCISS_DEBUG */
901 if (drv
->busy_configuring
)
904 * Root is allowed to open raw volume zero even if it's not configured
905 * so array config can still work. Root is also allowed to open any
906 * volume that has a LUN ID, so it can issue IOCTL to reread the
907 * disk information. I don't think I really like this
908 * but I'm already using way to many device nodes to claim another one
909 * for "raw controller".
911 if (drv
->heads
== 0) {
912 if (MINOR(bdev
->bd_dev
) != 0) { /* not node 0? */
913 /* if not node 0 make sure it is a partition = 0 */
914 if (MINOR(bdev
->bd_dev
) & 0x0f) {
916 /* if it is, make sure we have a LUN ID */
917 } else if (memcmp(drv
->LunID
, CTLR_LUNID
,
918 sizeof(drv
->LunID
))) {
922 if (!capable(CAP_SYS_ADMIN
))
933 static int cciss_release(struct gendisk
*disk
, fmode_t mode
)
935 ctlr_info_t
*host
= get_host(disk
);
936 drive_info_struct
*drv
= get_drv(disk
);
939 printk(KERN_DEBUG
"cciss_release %s\n", disk
->disk_name
);
940 #endif /* CCISS_DEBUG */
949 static int do_ioctl(struct block_device
*bdev
, fmode_t mode
,
950 unsigned cmd
, unsigned long arg
)
954 ret
= cciss_ioctl(bdev
, mode
, cmd
, arg
);
959 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
960 unsigned cmd
, unsigned long arg
);
961 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
962 unsigned cmd
, unsigned long arg
);
964 static int cciss_compat_ioctl(struct block_device
*bdev
, fmode_t mode
,
965 unsigned cmd
, unsigned long arg
)
968 case CCISS_GETPCIINFO
:
969 case CCISS_GETINTINFO
:
970 case CCISS_SETINTINFO
:
971 case CCISS_GETNODENAME
:
972 case CCISS_SETNODENAME
:
973 case CCISS_GETHEARTBEAT
:
974 case CCISS_GETBUSTYPES
:
975 case CCISS_GETFIRMVER
:
976 case CCISS_GETDRIVVER
:
977 case CCISS_REVALIDVOLS
:
978 case CCISS_DEREGDISK
:
979 case CCISS_REGNEWDISK
:
981 case CCISS_RESCANDISK
:
982 case CCISS_GETLUNINFO
:
983 return do_ioctl(bdev
, mode
, cmd
, arg
);
985 case CCISS_PASSTHRU32
:
986 return cciss_ioctl32_passthru(bdev
, mode
, cmd
, arg
);
987 case CCISS_BIG_PASSTHRU32
:
988 return cciss_ioctl32_big_passthru(bdev
, mode
, cmd
, arg
);
995 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
996 unsigned cmd
, unsigned long arg
)
998 IOCTL32_Command_struct __user
*arg32
=
999 (IOCTL32_Command_struct __user
*) arg
;
1000 IOCTL_Command_struct arg64
;
1001 IOCTL_Command_struct __user
*p
= compat_alloc_user_space(sizeof(arg64
));
1007 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
1008 sizeof(arg64
.LUN_info
));
1010 copy_from_user(&arg64
.Request
, &arg32
->Request
,
1011 sizeof(arg64
.Request
));
1013 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
1014 sizeof(arg64
.error_info
));
1015 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
1016 err
|= get_user(cp
, &arg32
->buf
);
1017 arg64
.buf
= compat_ptr(cp
);
1018 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
1023 err
= do_ioctl(bdev
, mode
, CCISS_PASSTHRU
, (unsigned long)p
);
1027 copy_in_user(&arg32
->error_info
, &p
->error_info
,
1028 sizeof(arg32
->error_info
));
1034 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
1035 unsigned cmd
, unsigned long arg
)
1037 BIG_IOCTL32_Command_struct __user
*arg32
=
1038 (BIG_IOCTL32_Command_struct __user
*) arg
;
1039 BIG_IOCTL_Command_struct arg64
;
1040 BIG_IOCTL_Command_struct __user
*p
=
1041 compat_alloc_user_space(sizeof(arg64
));
1047 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
1048 sizeof(arg64
.LUN_info
));
1050 copy_from_user(&arg64
.Request
, &arg32
->Request
,
1051 sizeof(arg64
.Request
));
1053 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
1054 sizeof(arg64
.error_info
));
1055 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
1056 err
|= get_user(arg64
.malloc_size
, &arg32
->malloc_size
);
1057 err
|= get_user(cp
, &arg32
->buf
);
1058 arg64
.buf
= compat_ptr(cp
);
1059 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
1064 err
= do_ioctl(bdev
, mode
, CCISS_BIG_PASSTHRU
, (unsigned long)p
);
1068 copy_in_user(&arg32
->error_info
, &p
->error_info
,
1069 sizeof(arg32
->error_info
));
1076 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
1078 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
1080 if (!drv
->cylinders
)
1083 geo
->heads
= drv
->heads
;
1084 geo
->sectors
= drv
->sectors
;
1085 geo
->cylinders
= drv
->cylinders
;
1089 static void check_ioctl_unit_attention(ctlr_info_t
*host
, CommandList_struct
*c
)
1091 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
&&
1092 c
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
)
1093 (void)check_for_unit_attention(host
, c
);
1098 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
1099 unsigned int cmd
, unsigned long arg
)
1101 struct gendisk
*disk
= bdev
->bd_disk
;
1102 ctlr_info_t
*host
= get_host(disk
);
1103 drive_info_struct
*drv
= get_drv(disk
);
1104 int ctlr
= host
->ctlr
;
1105 void __user
*argp
= (void __user
*)arg
;
1108 printk(KERN_DEBUG
"cciss_ioctl: Called with cmd=%x %lx\n", cmd
, arg
);
1109 #endif /* CCISS_DEBUG */
1112 case CCISS_GETPCIINFO
:
1114 cciss_pci_info_struct pciinfo
;
1118 pciinfo
.domain
= pci_domain_nr(host
->pdev
->bus
);
1119 pciinfo
.bus
= host
->pdev
->bus
->number
;
1120 pciinfo
.dev_fn
= host
->pdev
->devfn
;
1121 pciinfo
.board_id
= host
->board_id
;
1123 (argp
, &pciinfo
, sizeof(cciss_pci_info_struct
)))
1127 case CCISS_GETINTINFO
:
1129 cciss_coalint_struct intinfo
;
1133 readl(&host
->cfgtable
->HostWrite
.CoalIntDelay
);
1135 readl(&host
->cfgtable
->HostWrite
.CoalIntCount
);
1137 (argp
, &intinfo
, sizeof(cciss_coalint_struct
)))
1141 case CCISS_SETINTINFO
:
1143 cciss_coalint_struct intinfo
;
1144 unsigned long flags
;
1149 if (!capable(CAP_SYS_ADMIN
))
1152 (&intinfo
, argp
, sizeof(cciss_coalint_struct
)))
1154 if ((intinfo
.delay
== 0) && (intinfo
.count
== 0))
1156 // printk("cciss_ioctl: delay and count cannot be 0\n");
1159 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1160 /* Update the field, and then ring the doorbell */
1161 writel(intinfo
.delay
,
1162 &(host
->cfgtable
->HostWrite
.CoalIntDelay
));
1163 writel(intinfo
.count
,
1164 &(host
->cfgtable
->HostWrite
.CoalIntCount
));
1165 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1167 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1168 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1169 & CFGTBL_ChangeReq
))
1171 /* delay and try again */
1174 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1175 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1179 case CCISS_GETNODENAME
:
1181 NodeName_type NodeName
;
1186 for (i
= 0; i
< 16; i
++)
1188 readb(&host
->cfgtable
->ServerName
[i
]);
1189 if (copy_to_user(argp
, NodeName
, sizeof(NodeName_type
)))
1193 case CCISS_SETNODENAME
:
1195 NodeName_type NodeName
;
1196 unsigned long flags
;
1201 if (!capable(CAP_SYS_ADMIN
))
1205 (NodeName
, argp
, sizeof(NodeName_type
)))
1208 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1210 /* Update the field, and then ring the doorbell */
1211 for (i
= 0; i
< 16; i
++)
1213 &host
->cfgtable
->ServerName
[i
]);
1215 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1217 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1218 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1219 & CFGTBL_ChangeReq
))
1221 /* delay and try again */
1224 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1225 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1230 case CCISS_GETHEARTBEAT
:
1232 Heartbeat_type heartbeat
;
1236 heartbeat
= readl(&host
->cfgtable
->HeartBeat
);
1238 (argp
, &heartbeat
, sizeof(Heartbeat_type
)))
1242 case CCISS_GETBUSTYPES
:
1244 BusTypes_type BusTypes
;
1248 BusTypes
= readl(&host
->cfgtable
->BusTypes
);
1250 (argp
, &BusTypes
, sizeof(BusTypes_type
)))
1254 case CCISS_GETFIRMVER
:
1256 FirmwareVer_type firmware
;
1260 memcpy(firmware
, host
->firm_ver
, 4);
1263 (argp
, firmware
, sizeof(FirmwareVer_type
)))
1267 case CCISS_GETDRIVVER
:
1269 DriverVer_type DriverVer
= DRIVER_VERSION
;
1275 (argp
, &DriverVer
, sizeof(DriverVer_type
)))
1280 case CCISS_DEREGDISK
:
1282 case CCISS_REVALIDVOLS
:
1283 return rebuild_lun_table(host
, 0, 1);
1285 case CCISS_GETLUNINFO
:{
1286 LogvolInfo_struct luninfo
;
1288 memcpy(&luninfo
.LunID
, drv
->LunID
,
1289 sizeof(luninfo
.LunID
));
1290 luninfo
.num_opens
= drv
->usage_count
;
1291 luninfo
.num_parts
= 0;
1292 if (copy_to_user(argp
, &luninfo
,
1293 sizeof(LogvolInfo_struct
)))
1297 case CCISS_PASSTHRU
:
1299 IOCTL_Command_struct iocommand
;
1300 CommandList_struct
*c
;
1303 unsigned long flags
;
1304 DECLARE_COMPLETION_ONSTACK(wait
);
1309 if (!capable(CAP_SYS_RAWIO
))
1313 (&iocommand
, argp
, sizeof(IOCTL_Command_struct
)))
1315 if ((iocommand
.buf_size
< 1) &&
1316 (iocommand
.Request
.Type
.Direction
!= XFER_NONE
)) {
1319 #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
1320 /* Check kmalloc limits */
1321 if (iocommand
.buf_size
> 128000)
1324 if (iocommand
.buf_size
> 0) {
1325 buff
= kmalloc(iocommand
.buf_size
, GFP_KERNEL
);
1329 if (iocommand
.Request
.Type
.Direction
== XFER_WRITE
) {
1330 /* Copy the data into the buffer we created */
1332 (buff
, iocommand
.buf
, iocommand
.buf_size
)) {
1337 memset(buff
, 0, iocommand
.buf_size
);
1339 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1343 // Fill in the command type
1344 c
->cmd_type
= CMD_IOCTL_PEND
;
1345 // Fill in Command Header
1346 c
->Header
.ReplyQueue
= 0; // unused in simple mode
1347 if (iocommand
.buf_size
> 0) // buffer to fill
1349 c
->Header
.SGList
= 1;
1350 c
->Header
.SGTotal
= 1;
1351 } else // no buffers to fill
1353 c
->Header
.SGList
= 0;
1354 c
->Header
.SGTotal
= 0;
1356 c
->Header
.LUN
= iocommand
.LUN_info
;
1357 c
->Header
.Tag
.lower
= c
->busaddr
; // use the kernel address the cmd block for tag
1359 // Fill in Request block
1360 c
->Request
= iocommand
.Request
;
1362 // Fill in the scatter gather information
1363 if (iocommand
.buf_size
> 0) {
1364 temp64
.val
= pci_map_single(host
->pdev
, buff
,
1366 PCI_DMA_BIDIRECTIONAL
);
1367 c
->SG
[0].Addr
.lower
= temp64
.val32
.lower
;
1368 c
->SG
[0].Addr
.upper
= temp64
.val32
.upper
;
1369 c
->SG
[0].Len
= iocommand
.buf_size
;
1370 c
->SG
[0].Ext
= 0; // we are not chaining
1374 /* Put the request on the tail of the request queue */
1375 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1376 addQ(&host
->reqQ
, c
);
1379 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1381 wait_for_completion(&wait
);
1383 /* unlock the buffers from DMA */
1384 temp64
.val32
.lower
= c
->SG
[0].Addr
.lower
;
1385 temp64
.val32
.upper
= c
->SG
[0].Addr
.upper
;
1386 pci_unmap_single(host
->pdev
, (dma_addr_t
) temp64
.val
,
1388 PCI_DMA_BIDIRECTIONAL
);
1390 check_ioctl_unit_attention(host
, c
);
1392 /* Copy the error information out */
1393 iocommand
.error_info
= *(c
->err_info
);
1395 (argp
, &iocommand
, sizeof(IOCTL_Command_struct
))) {
1397 cmd_free(host
, c
, 0);
1401 if (iocommand
.Request
.Type
.Direction
== XFER_READ
) {
1402 /* Copy the data out of the buffer we created */
1404 (iocommand
.buf
, buff
, iocommand
.buf_size
)) {
1406 cmd_free(host
, c
, 0);
1411 cmd_free(host
, c
, 0);
1414 case CCISS_BIG_PASSTHRU
:{
1415 BIG_IOCTL_Command_struct
*ioc
;
1416 CommandList_struct
*c
;
1417 unsigned char **buff
= NULL
;
1418 int *buff_size
= NULL
;
1420 unsigned long flags
;
1424 DECLARE_COMPLETION_ONSTACK(wait
);
1427 BYTE __user
*data_ptr
;
1431 if (!capable(CAP_SYS_RAWIO
))
1433 ioc
= (BIG_IOCTL_Command_struct
*)
1434 kmalloc(sizeof(*ioc
), GFP_KERNEL
);
1439 if (copy_from_user(ioc
, argp
, sizeof(*ioc
))) {
1443 if ((ioc
->buf_size
< 1) &&
1444 (ioc
->Request
.Type
.Direction
!= XFER_NONE
)) {
1448 /* Check kmalloc limits using all SGs */
1449 if (ioc
->malloc_size
> MAX_KMALLOC_SIZE
) {
1453 if (ioc
->buf_size
> ioc
->malloc_size
* MAXSGENTRIES
) {
1458 kzalloc(MAXSGENTRIES
* sizeof(char *), GFP_KERNEL
);
1463 buff_size
= kmalloc(MAXSGENTRIES
* sizeof(int),
1469 left
= ioc
->buf_size
;
1470 data_ptr
= ioc
->buf
;
1473 ioc
->malloc_size
) ? ioc
->
1475 buff_size
[sg_used
] = sz
;
1476 buff
[sg_used
] = kmalloc(sz
, GFP_KERNEL
);
1477 if (buff
[sg_used
] == NULL
) {
1481 if (ioc
->Request
.Type
.Direction
== XFER_WRITE
) {
1483 (buff
[sg_used
], data_ptr
, sz
)) {
1488 memset(buff
[sg_used
], 0, sz
);
1494 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1498 c
->cmd_type
= CMD_IOCTL_PEND
;
1499 c
->Header
.ReplyQueue
= 0;
1501 if (ioc
->buf_size
> 0) {
1502 c
->Header
.SGList
= sg_used
;
1503 c
->Header
.SGTotal
= sg_used
;
1505 c
->Header
.SGList
= 0;
1506 c
->Header
.SGTotal
= 0;
1508 c
->Header
.LUN
= ioc
->LUN_info
;
1509 c
->Header
.Tag
.lower
= c
->busaddr
;
1511 c
->Request
= ioc
->Request
;
1512 if (ioc
->buf_size
> 0) {
1514 for (i
= 0; i
< sg_used
; i
++) {
1516 pci_map_single(host
->pdev
, buff
[i
],
1518 PCI_DMA_BIDIRECTIONAL
);
1519 c
->SG
[i
].Addr
.lower
=
1521 c
->SG
[i
].Addr
.upper
=
1523 c
->SG
[i
].Len
= buff_size
[i
];
1524 c
->SG
[i
].Ext
= 0; /* we are not chaining */
1528 /* Put the request on the tail of the request queue */
1529 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1530 addQ(&host
->reqQ
, c
);
1533 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1534 wait_for_completion(&wait
);
1535 /* unlock the buffers from DMA */
1536 for (i
= 0; i
< sg_used
; i
++) {
1537 temp64
.val32
.lower
= c
->SG
[i
].Addr
.lower
;
1538 temp64
.val32
.upper
= c
->SG
[i
].Addr
.upper
;
1539 pci_unmap_single(host
->pdev
,
1540 (dma_addr_t
) temp64
.val
, buff_size
[i
],
1541 PCI_DMA_BIDIRECTIONAL
);
1543 check_ioctl_unit_attention(host
, c
);
1544 /* Copy the error information out */
1545 ioc
->error_info
= *(c
->err_info
);
1546 if (copy_to_user(argp
, ioc
, sizeof(*ioc
))) {
1547 cmd_free(host
, c
, 0);
1551 if (ioc
->Request
.Type
.Direction
== XFER_READ
) {
1552 /* Copy the data out of the buffer we created */
1553 BYTE __user
*ptr
= ioc
->buf
;
1554 for (i
= 0; i
< sg_used
; i
++) {
1556 (ptr
, buff
[i
], buff_size
[i
])) {
1557 cmd_free(host
, c
, 0);
1561 ptr
+= buff_size
[i
];
1564 cmd_free(host
, c
, 0);
1568 for (i
= 0; i
< sg_used
; i
++)
1577 /* scsi_cmd_ioctl handles these, below, though some are not */
1578 /* very meaningful for cciss. SG_IO is the main one people want. */
1580 case SG_GET_VERSION_NUM
:
1581 case SG_SET_TIMEOUT
:
1582 case SG_GET_TIMEOUT
:
1583 case SG_GET_RESERVED_SIZE
:
1584 case SG_SET_RESERVED_SIZE
:
1585 case SG_EMULATED_HOST
:
1587 case SCSI_IOCTL_SEND_COMMAND
:
1588 return scsi_cmd_ioctl(disk
->queue
, disk
, mode
, cmd
, argp
);
1590 /* scsi_cmd_ioctl would normally handle these, below, but */
1591 /* they aren't a good fit for cciss, as CD-ROMs are */
1592 /* not supported, and we don't have any bus/target/lun */
1593 /* which we present to the kernel. */
1595 case CDROM_SEND_PACKET
:
1596 case CDROMCLOSETRAY
:
1598 case SCSI_IOCTL_GET_IDLUN
:
1599 case SCSI_IOCTL_GET_BUS_NUMBER
:
1605 static void cciss_check_queues(ctlr_info_t
*h
)
1607 int start_queue
= h
->next_to_run
;
1610 /* check to see if we have maxed out the number of commands that can
1611 * be placed on the queue. If so then exit. We do this check here
1612 * in case the interrupt we serviced was from an ioctl and did not
1613 * free any new commands.
1615 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
)
1618 /* We have room on the queue for more commands. Now we need to queue
1619 * them up. We will also keep track of the next queue to run so
1620 * that every queue gets a chance to be started first.
1622 for (i
= 0; i
< h
->highest_lun
+ 1; i
++) {
1623 int curr_queue
= (start_queue
+ i
) % (h
->highest_lun
+ 1);
1624 /* make sure the disk has been added and the drive is real
1625 * because this can be called from the middle of init_one.
1627 if (!h
->drv
[curr_queue
])
1629 if (!(h
->drv
[curr_queue
]->queue
) ||
1630 !(h
->drv
[curr_queue
]->heads
))
1632 blk_start_queue(h
->gendisk
[curr_queue
]->queue
);
1634 /* check to see if we have maxed out the number of commands
1635 * that can be placed on the queue.
1637 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
) {
1638 if (curr_queue
== start_queue
) {
1640 (start_queue
+ 1) % (h
->highest_lun
+ 1);
1643 h
->next_to_run
= curr_queue
;
1650 static void cciss_softirq_done(struct request
*rq
)
1652 CommandList_struct
*cmd
= rq
->completion_data
;
1653 ctlr_info_t
*h
= hba
[cmd
->ctlr
];
1654 unsigned long flags
;
1658 if (cmd
->Request
.Type
.Direction
== XFER_READ
)
1659 ddir
= PCI_DMA_FROMDEVICE
;
1661 ddir
= PCI_DMA_TODEVICE
;
1663 /* command did not need to be retried */
1664 /* unmap the DMA mapping for all the scatter gather elements */
1665 for (i
= 0; i
< cmd
->Header
.SGList
; i
++) {
1666 temp64
.val32
.lower
= cmd
->SG
[i
].Addr
.lower
;
1667 temp64
.val32
.upper
= cmd
->SG
[i
].Addr
.upper
;
1668 pci_unmap_page(h
->pdev
, temp64
.val
, cmd
->SG
[i
].Len
, ddir
);
1672 printk("Done with %p\n", rq
);
1673 #endif /* CCISS_DEBUG */
1675 /* set the residual count for pc requests */
1676 if (blk_pc_request(rq
))
1677 rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
1679 blk_end_request_all(rq
, (rq
->errors
== 0) ? 0 : -EIO
);
1681 spin_lock_irqsave(&h
->lock
, flags
);
1682 cmd_free(h
, cmd
, 1);
1683 cciss_check_queues(h
);
1684 spin_unlock_irqrestore(&h
->lock
, flags
);
1687 static inline void log_unit_to_scsi3addr(ctlr_info_t
*h
,
1688 unsigned char scsi3addr
[], uint32_t log_unit
)
1690 memcpy(scsi3addr
, h
->drv
[log_unit
]->LunID
,
1691 sizeof(h
->drv
[log_unit
]->LunID
));
1694 /* This function gets the SCSI vendor, model, and revision of a logical drive
1695 * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
1696 * they cannot be read.
1698 static void cciss_get_device_descr(int ctlr
, int logvol
, int withirq
,
1699 char *vendor
, char *model
, char *rev
)
1702 InquiryData_struct
*inq_buf
;
1703 unsigned char scsi3addr
[8];
1709 inq_buf
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1713 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1715 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, inq_buf
,
1716 sizeof(InquiryData_struct
), 0,
1717 scsi3addr
, TYPE_CMD
);
1719 rc
= sendcmd(CISS_INQUIRY
, ctlr
, inq_buf
,
1720 sizeof(InquiryData_struct
), 0,
1721 scsi3addr
, TYPE_CMD
);
1723 memcpy(vendor
, &inq_buf
->data_byte
[8], VENDOR_LEN
);
1724 vendor
[VENDOR_LEN
] = '\0';
1725 memcpy(model
, &inq_buf
->data_byte
[16], MODEL_LEN
);
1726 model
[MODEL_LEN
] = '\0';
1727 memcpy(rev
, &inq_buf
->data_byte
[32], REV_LEN
);
1728 rev
[REV_LEN
] = '\0';
1735 /* This function gets the serial number of a logical drive via
1736 * inquiry page 0x83. Serial no. is 16 bytes. If the serial
1737 * number cannot be had, for whatever reason, 16 bytes of 0xff
1738 * are returned instead.
1740 static void cciss_get_serial_no(int ctlr
, int logvol
, int withirq
,
1741 unsigned char *serial_no
, int buflen
)
1743 #define PAGE_83_INQ_BYTES 64
1746 unsigned char scsi3addr
[8];
1750 memset(serial_no
, 0xff, buflen
);
1751 buf
= kzalloc(PAGE_83_INQ_BYTES
, GFP_KERNEL
);
1754 memset(serial_no
, 0, buflen
);
1755 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1757 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, buf
,
1758 PAGE_83_INQ_BYTES
, 0x83, scsi3addr
, TYPE_CMD
);
1760 rc
= sendcmd(CISS_INQUIRY
, ctlr
, buf
,
1761 PAGE_83_INQ_BYTES
, 0x83, scsi3addr
, TYPE_CMD
);
1763 memcpy(serial_no
, &buf
[8], buflen
);
1769 * cciss_add_disk sets up the block device queue for a logical drive
1771 static int cciss_add_disk(ctlr_info_t
*h
, struct gendisk
*disk
,
1774 disk
->queue
= blk_init_queue(do_cciss_request
, &h
->lock
);
1776 goto init_queue_failure
;
1777 sprintf(disk
->disk_name
, "cciss/c%dd%d", h
->ctlr
, drv_index
);
1778 disk
->major
= h
->major
;
1779 disk
->first_minor
= drv_index
<< NWD_SHIFT
;
1780 disk
->fops
= &cciss_fops
;
1781 if (cciss_create_ld_sysfs_entry(h
, drv_index
))
1783 disk
->private_data
= h
->drv
[drv_index
];
1784 disk
->driverfs_dev
= &h
->drv
[drv_index
]->dev
;
1786 /* Set up queue information */
1787 blk_queue_bounce_limit(disk
->queue
, h
->pdev
->dma_mask
);
1789 /* This is a hardware imposed limit. */
1790 blk_queue_max_hw_segments(disk
->queue
, MAXSGENTRIES
);
1792 /* This is a limit in the driver and could be eliminated. */
1793 blk_queue_max_phys_segments(disk
->queue
, MAXSGENTRIES
);
1795 blk_queue_max_sectors(disk
->queue
, h
->cciss_max_sectors
);
1797 blk_queue_softirq_done(disk
->queue
, cciss_softirq_done
);
1799 disk
->queue
->queuedata
= h
;
1801 blk_queue_logical_block_size(disk
->queue
,
1802 h
->drv
[drv_index
]->block_size
);
1804 /* Make sure all queue data is written out before */
1805 /* setting h->drv[drv_index]->queue, as setting this */
1806 /* allows the interrupt handler to start the queue */
1808 h
->drv
[drv_index
]->queue
= disk
->queue
;
1813 blk_cleanup_queue(disk
->queue
);
1819 /* This function will check the usage_count of the drive to be updated/added.
1820 * If the usage_count is zero and it is a heretofore unknown drive, or,
1821 * the drive's capacity, geometry, or serial number has changed,
1822 * then the drive information will be updated and the disk will be
1823 * re-registered with the kernel. If these conditions don't hold,
1824 * then it will be left alone for the next reboot. The exception to this
1825 * is disk 0 which will always be left registered with the kernel since it
1826 * is also the controller node. Any changes to disk 0 will show up on
1829 static void cciss_update_drive_info(int ctlr
, int drv_index
, int first_time
,
1832 ctlr_info_t
*h
= hba
[ctlr
];
1833 struct gendisk
*disk
;
1834 InquiryData_struct
*inq_buff
= NULL
;
1835 unsigned int block_size
;
1836 sector_t total_size
;
1837 unsigned long flags
= 0;
1839 drive_info_struct
*drvinfo
;
1841 /* Get information about the disk and modify the driver structure */
1842 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1843 drvinfo
= kzalloc(sizeof(*drvinfo
), GFP_KERNEL
);
1844 if (inq_buff
== NULL
|| drvinfo
== NULL
)
1847 /* testing to see if 16-byte CDBs are already being used */
1848 if (h
->cciss_read
== CCISS_READ_16
) {
1849 cciss_read_capacity_16(h
->ctlr
, drv_index
, 1,
1850 &total_size
, &block_size
);
1853 cciss_read_capacity(ctlr
, drv_index
, 1,
1854 &total_size
, &block_size
);
1856 /* if read_capacity returns all F's this volume is >2TB */
1857 /* in size so we switch to 16-byte CDB's for all */
1858 /* read/write ops */
1859 if (total_size
== 0xFFFFFFFFULL
) {
1860 cciss_read_capacity_16(ctlr
, drv_index
, 1,
1861 &total_size
, &block_size
);
1862 h
->cciss_read
= CCISS_READ_16
;
1863 h
->cciss_write
= CCISS_WRITE_16
;
1865 h
->cciss_read
= CCISS_READ_10
;
1866 h
->cciss_write
= CCISS_WRITE_10
;
1870 cciss_geometry_inquiry(ctlr
, drv_index
, 1, total_size
, block_size
,
1872 drvinfo
->block_size
= block_size
;
1873 drvinfo
->nr_blocks
= total_size
+ 1;
1875 cciss_get_device_descr(ctlr
, drv_index
, 1, drvinfo
->vendor
,
1876 drvinfo
->model
, drvinfo
->rev
);
1877 cciss_get_serial_no(ctlr
, drv_index
, 1, drvinfo
->serial_no
,
1878 sizeof(drvinfo
->serial_no
));
1879 /* Save the lunid in case we deregister the disk, below. */
1880 memcpy(drvinfo
->LunID
, h
->drv
[drv_index
]->LunID
,
1881 sizeof(drvinfo
->LunID
));
1883 /* Is it the same disk we already know, and nothing's changed? */
1884 if (h
->drv
[drv_index
]->raid_level
!= -1 &&
1885 ((memcmp(drvinfo
->serial_no
,
1886 h
->drv
[drv_index
]->serial_no
, 16) == 0) &&
1887 drvinfo
->block_size
== h
->drv
[drv_index
]->block_size
&&
1888 drvinfo
->nr_blocks
== h
->drv
[drv_index
]->nr_blocks
&&
1889 drvinfo
->heads
== h
->drv
[drv_index
]->heads
&&
1890 drvinfo
->sectors
== h
->drv
[drv_index
]->sectors
&&
1891 drvinfo
->cylinders
== h
->drv
[drv_index
]->cylinders
))
1892 /* The disk is unchanged, nothing to update */
1895 /* If we get here it's not the same disk, or something's changed,
1896 * so we need to * deregister it, and re-register it, if it's not
1898 * If the disk already exists then deregister it before proceeding
1899 * (unless it's the first disk (for the controller node).
1901 if (h
->drv
[drv_index
]->raid_level
!= -1 && drv_index
!= 0) {
1902 printk(KERN_WARNING
"disk %d has changed.\n", drv_index
);
1903 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1904 h
->drv
[drv_index
]->busy_configuring
= 1;
1905 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1907 /* deregister_disk sets h->drv[drv_index]->queue = NULL
1908 * which keeps the interrupt handler from starting
1911 ret
= deregister_disk(h
, drv_index
, 0, via_ioctl
);
1914 /* If the disk is in use return */
1918 /* Save the new information from cciss_geometry_inquiry
1919 * and serial number inquiry. If the disk was deregistered
1920 * above, then h->drv[drv_index] will be NULL.
1922 if (h
->drv
[drv_index
] == NULL
) {
1923 drvinfo
->device_initialized
= 0;
1924 h
->drv
[drv_index
] = drvinfo
;
1925 drvinfo
= NULL
; /* so it won't be freed below. */
1927 /* special case for cxd0 */
1928 h
->drv
[drv_index
]->block_size
= drvinfo
->block_size
;
1929 h
->drv
[drv_index
]->nr_blocks
= drvinfo
->nr_blocks
;
1930 h
->drv
[drv_index
]->heads
= drvinfo
->heads
;
1931 h
->drv
[drv_index
]->sectors
= drvinfo
->sectors
;
1932 h
->drv
[drv_index
]->cylinders
= drvinfo
->cylinders
;
1933 h
->drv
[drv_index
]->raid_level
= drvinfo
->raid_level
;
1934 memcpy(h
->drv
[drv_index
]->serial_no
, drvinfo
->serial_no
, 16);
1935 memcpy(h
->drv
[drv_index
]->vendor
, drvinfo
->vendor
,
1937 memcpy(h
->drv
[drv_index
]->model
, drvinfo
->model
, MODEL_LEN
+ 1);
1938 memcpy(h
->drv
[drv_index
]->rev
, drvinfo
->rev
, REV_LEN
+ 1);
1942 disk
= h
->gendisk
[drv_index
];
1943 set_capacity(disk
, h
->drv
[drv_index
]->nr_blocks
);
1945 /* If it's not disk 0 (drv_index != 0)
1946 * or if it was disk 0, but there was previously
1947 * no actual corresponding configured logical drive
1948 * (raid_leve == -1) then we want to update the
1949 * logical drive's information.
1951 if (drv_index
|| first_time
) {
1952 if (cciss_add_disk(h
, disk
, drv_index
) != 0) {
1953 cciss_free_gendisk(h
, drv_index
);
1954 cciss_free_drive_info(h
, drv_index
);
1955 printk(KERN_WARNING
"cciss:%d could not update "
1956 "disk %d\n", h
->ctlr
, drv_index
);
1966 printk(KERN_ERR
"cciss: out of memory\n");
1970 /* This function will find the first index of the controllers drive array
1971 * that has a null drv pointer and allocate the drive info struct and
1972 * will return that index This is where new drives will be added.
1973 * If the index to be returned is greater than the highest_lun index for
1974 * the controller then highest_lun is set * to this new index.
1975 * If there are no available indexes or if tha allocation fails, then -1
1976 * is returned. * "controller_node" is used to know if this is a real
1977 * logical drive, or just the controller node, which determines if this
1978 * counts towards highest_lun.
1980 static int cciss_alloc_drive_info(ctlr_info_t
*h
, int controller_node
)
1983 drive_info_struct
*drv
;
1985 /* Search for an empty slot for our drive info */
1986 for (i
= 0; i
< CISS_MAX_LUN
; i
++) {
1988 /* if not cxd0 case, and it's occupied, skip it. */
1989 if (h
->drv
[i
] && i
!= 0)
1992 * If it's cxd0 case, and drv is alloc'ed already, and a
1993 * disk is configured there, skip it.
1995 if (i
== 0 && h
->drv
[i
] && h
->drv
[i
]->raid_level
!= -1)
1999 * We've found an empty slot. Update highest_lun
2000 * provided this isn't just the fake cxd0 controller node.
2002 if (i
> h
->highest_lun
&& !controller_node
)
2005 /* If adding a real disk at cxd0, and it's already alloc'ed */
2006 if (i
== 0 && h
->drv
[i
] != NULL
)
2010 * Found an empty slot, not already alloc'ed. Allocate it.
2011 * Mark it with raid_level == -1, so we know it's new later on.
2013 drv
= kzalloc(sizeof(*drv
), GFP_KERNEL
);
2016 drv
->raid_level
= -1; /* so we know it's new */
2023 static void cciss_free_drive_info(ctlr_info_t
*h
, int drv_index
)
2025 kfree(h
->drv
[drv_index
]);
2026 h
->drv
[drv_index
] = NULL
;
2029 static void cciss_free_gendisk(ctlr_info_t
*h
, int drv_index
)
2031 put_disk(h
->gendisk
[drv_index
]);
2032 h
->gendisk
[drv_index
] = NULL
;
2035 /* cciss_add_gendisk finds a free hba[]->drv structure
2036 * and allocates a gendisk if needed, and sets the lunid
2037 * in the drvinfo structure. It returns the index into
2038 * the ->drv[] array, or -1 if none are free.
2039 * is_controller_node indicates whether highest_lun should
2040 * count this disk, or if it's only being added to provide
2041 * a means to talk to the controller in case no logical
2042 * drives have yet been configured.
2044 static int cciss_add_gendisk(ctlr_info_t
*h
, unsigned char lunid
[],
2045 int controller_node
)
2049 drv_index
= cciss_alloc_drive_info(h
, controller_node
);
2050 if (drv_index
== -1)
2053 /*Check if the gendisk needs to be allocated */
2054 if (!h
->gendisk
[drv_index
]) {
2055 h
->gendisk
[drv_index
] =
2056 alloc_disk(1 << NWD_SHIFT
);
2057 if (!h
->gendisk
[drv_index
]) {
2058 printk(KERN_ERR
"cciss%d: could not "
2059 "allocate a new disk %d\n",
2060 h
->ctlr
, drv_index
);
2061 goto err_free_drive_info
;
2064 memcpy(h
->drv
[drv_index
]->LunID
, lunid
,
2065 sizeof(h
->drv
[drv_index
]->LunID
));
2066 if (cciss_create_ld_sysfs_entry(h
, drv_index
))
2068 /* Don't need to mark this busy because nobody */
2069 /* else knows about this disk yet to contend */
2070 /* for access to it. */
2071 h
->drv
[drv_index
]->busy_configuring
= 0;
2076 cciss_free_gendisk(h
, drv_index
);
2077 err_free_drive_info
:
2078 cciss_free_drive_info(h
, drv_index
);
2082 /* This is for the special case of a controller which
2083 * has no logical drives. In this case, we still need
2084 * to register a disk so the controller can be accessed
2085 * by the Array Config Utility.
2087 static void cciss_add_controller_node(ctlr_info_t
*h
)
2089 struct gendisk
*disk
;
2092 if (h
->gendisk
[0] != NULL
) /* already did this? Then bail. */
2095 drv_index
= cciss_add_gendisk(h
, CTLR_LUNID
, 1);
2096 if (drv_index
== -1)
2098 h
->drv
[drv_index
]->block_size
= 512;
2099 h
->drv
[drv_index
]->nr_blocks
= 0;
2100 h
->drv
[drv_index
]->heads
= 0;
2101 h
->drv
[drv_index
]->sectors
= 0;
2102 h
->drv
[drv_index
]->cylinders
= 0;
2103 h
->drv
[drv_index
]->raid_level
= -1;
2104 memset(h
->drv
[drv_index
]->serial_no
, 0, 16);
2105 disk
= h
->gendisk
[drv_index
];
2106 if (cciss_add_disk(h
, disk
, drv_index
) == 0)
2108 cciss_free_gendisk(h
, drv_index
);
2109 cciss_free_drive_info(h
, drv_index
);
2111 printk(KERN_WARNING
"cciss%d: could not "
2112 "add disk 0.\n", h
->ctlr
);
2116 /* This function will add and remove logical drives from the Logical
2117 * drive array of the controller and maintain persistency of ordering
2118 * so that mount points are preserved until the next reboot. This allows
2119 * for the removal of logical drives in the middle of the drive array
2120 * without a re-ordering of those drives.
2122 * h = The controller to perform the operations on
2124 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
,
2129 ReportLunData_struct
*ld_buff
= NULL
;
2135 unsigned char lunid
[8] = CTLR_LUNID
;
2136 unsigned long flags
;
2138 if (!capable(CAP_SYS_RAWIO
))
2141 /* Set busy_configuring flag for this operation */
2142 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2143 if (h
->busy_configuring
) {
2144 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2147 h
->busy_configuring
= 1;
2148 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2150 ld_buff
= kzalloc(sizeof(ReportLunData_struct
), GFP_KERNEL
);
2151 if (ld_buff
== NULL
)
2154 return_code
= sendcmd_withirq(CISS_REPORT_LOG
, ctlr
, ld_buff
,
2155 sizeof(ReportLunData_struct
),
2156 0, CTLR_LUNID
, TYPE_CMD
);
2158 if (return_code
== IO_OK
)
2159 listlength
= be32_to_cpu(*(__be32
*) ld_buff
->LUNListLength
);
2160 else { /* reading number of logical volumes failed */
2161 printk(KERN_WARNING
"cciss: report logical volume"
2162 " command failed\n");
2167 num_luns
= listlength
/ 8; /* 8 bytes per entry */
2168 if (num_luns
> CISS_MAX_LUN
) {
2169 num_luns
= CISS_MAX_LUN
;
2170 printk(KERN_WARNING
"cciss: more luns configured"
2171 " on controller than can be handled by"
2176 cciss_add_controller_node(h
);
2178 /* Compare controller drive array to driver's drive array
2179 * to see if any drives are missing on the controller due
2180 * to action of Array Config Utility (user deletes drive)
2181 * and deregister logical drives which have disappeared.
2183 for (i
= 0; i
<= h
->highest_lun
; i
++) {
2187 /* skip holes in the array from already deleted drives */
2188 if (h
->drv
[i
] == NULL
)
2191 for (j
= 0; j
< num_luns
; j
++) {
2192 memcpy(lunid
, &ld_buff
->LUN
[j
][0], sizeof(lunid
));
2193 if (memcmp(h
->drv
[i
]->LunID
, lunid
,
2194 sizeof(lunid
)) == 0) {
2200 /* Deregister it from the OS, it's gone. */
2201 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2202 h
->drv
[i
]->busy_configuring
= 1;
2203 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2204 return_code
= deregister_disk(h
, i
, 1, via_ioctl
);
2205 if (h
->drv
[i
] != NULL
)
2206 h
->drv
[i
]->busy_configuring
= 0;
2210 /* Compare controller drive array to driver's drive array.
2211 * Check for updates in the drive information and any new drives
2212 * on the controller due to ACU adding logical drives, or changing
2213 * a logical drive's size, etc. Reregister any new/changed drives
2215 for (i
= 0; i
< num_luns
; i
++) {
2220 memcpy(lunid
, &ld_buff
->LUN
[i
][0], sizeof(lunid
));
2221 /* Find if the LUN is already in the drive array
2222 * of the driver. If so then update its info
2223 * if not in use. If it does not exist then find
2224 * the first free index and add it.
2226 for (j
= 0; j
<= h
->highest_lun
; j
++) {
2227 if (h
->drv
[j
] != NULL
&&
2228 memcmp(h
->drv
[j
]->LunID
, lunid
,
2229 sizeof(h
->drv
[j
]->LunID
)) == 0) {
2236 /* check if the drive was found already in the array */
2238 drv_index
= cciss_add_gendisk(h
, lunid
, 0);
2239 if (drv_index
== -1)
2242 cciss_update_drive_info(ctlr
, drv_index
, first_time
,
2248 h
->busy_configuring
= 0;
2249 /* We return -1 here to tell the ACU that we have registered/updated
2250 * all of the drives that we can and to keep it from calling us
2255 printk(KERN_ERR
"cciss: out of memory\n");
2256 h
->busy_configuring
= 0;
2260 static void cciss_clear_drive_info(drive_info_struct
*drive_info
)
2262 /* zero out the disk size info */
2263 drive_info
->nr_blocks
= 0;
2264 drive_info
->block_size
= 0;
2265 drive_info
->heads
= 0;
2266 drive_info
->sectors
= 0;
2267 drive_info
->cylinders
= 0;
2268 drive_info
->raid_level
= -1;
2269 memset(drive_info
->serial_no
, 0, sizeof(drive_info
->serial_no
));
2270 memset(drive_info
->model
, 0, sizeof(drive_info
->model
));
2271 memset(drive_info
->rev
, 0, sizeof(drive_info
->rev
));
2272 memset(drive_info
->vendor
, 0, sizeof(drive_info
->vendor
));
2274 * don't clear the LUNID though, we need to remember which
2279 /* This function will deregister the disk and it's queue from the
2280 * kernel. It must be called with the controller lock held and the
2281 * drv structures busy_configuring flag set. It's parameters are:
2283 * disk = This is the disk to be deregistered
2284 * drv = This is the drive_info_struct associated with the disk to be
2285 * deregistered. It contains information about the disk used
2287 * clear_all = This flag determines whether or not the disk information
2288 * is going to be completely cleared out and the highest_lun
2289 * reset. Sometimes we want to clear out information about
2290 * the disk in preparation for re-adding it. In this case
2291 * the highest_lun should be left unchanged and the LunID
2292 * should not be cleared.
2294 * This indicates whether we've reached this path via ioctl.
2295 * This affects the maximum usage count allowed for c0d0 to be messed with.
2296 * If this path is reached via ioctl(), then the max_usage_count will
2297 * be 1, as the process calling ioctl() has got to have the device open.
2298 * If we get here via sysfs, then the max usage count will be zero.
2300 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
2301 int clear_all
, int via_ioctl
)
2304 struct gendisk
*disk
;
2305 drive_info_struct
*drv
;
2306 int recalculate_highest_lun
;
2308 if (!capable(CAP_SYS_RAWIO
))
2311 drv
= h
->drv
[drv_index
];
2312 disk
= h
->gendisk
[drv_index
];
2314 /* make sure logical volume is NOT is use */
2315 if (clear_all
|| (h
->gendisk
[0] == disk
)) {
2316 if (drv
->usage_count
> via_ioctl
)
2318 } else if (drv
->usage_count
> 0)
2321 recalculate_highest_lun
= (drv
== h
->drv
[h
->highest_lun
]);
2323 /* invalidate the devices and deregister the disk. If it is disk
2324 * zero do not deregister it but just zero out it's values. This
2325 * allows us to delete disk zero but keep the controller registered.
2327 if (h
->gendisk
[0] != disk
) {
2328 struct request_queue
*q
= disk
->queue
;
2329 if (disk
->flags
& GENHD_FL_UP
) {
2330 cciss_destroy_ld_sysfs_entry(h
, drv_index
, 0);
2334 blk_cleanup_queue(q
);
2335 /* If clear_all is set then we are deleting the logical
2336 * drive, not just refreshing its info. For drives
2337 * other than disk 0 we will call put_disk. We do not
2338 * do this for disk 0 as we need it to be able to
2339 * configure the controller.
2342 /* This isn't pretty, but we need to find the
2343 * disk in our array and NULL our the pointer.
2344 * This is so that we will call alloc_disk if
2345 * this index is used again later.
2347 for (i
=0; i
< CISS_MAX_LUN
; i
++){
2348 if (h
->gendisk
[i
] == disk
) {
2349 h
->gendisk
[i
] = NULL
;
2356 set_capacity(disk
, 0);
2357 cciss_clear_drive_info(drv
);
2362 /* if it was the last disk, find the new hightest lun */
2363 if (clear_all
&& recalculate_highest_lun
) {
2364 int i
, newhighest
= -1;
2365 for (i
= 0; i
<= h
->highest_lun
; i
++) {
2366 /* if the disk has size > 0, it is available */
2367 if (h
->drv
[i
] && h
->drv
[i
]->heads
)
2370 h
->highest_lun
= newhighest
;
2375 static int fill_cmd(CommandList_struct
*c
, __u8 cmd
, int ctlr
, void *buff
,
2376 size_t size
, __u8 page_code
, unsigned char *scsi3addr
,
2379 ctlr_info_t
*h
= hba
[ctlr
];
2380 u64bit buff_dma_handle
;
2383 c
->cmd_type
= CMD_IOCTL_PEND
;
2384 c
->Header
.ReplyQueue
= 0;
2386 c
->Header
.SGList
= 1;
2387 c
->Header
.SGTotal
= 1;
2389 c
->Header
.SGList
= 0;
2390 c
->Header
.SGTotal
= 0;
2392 c
->Header
.Tag
.lower
= c
->busaddr
;
2393 memcpy(c
->Header
.LUN
.LunAddrBytes
, scsi3addr
, 8);
2395 c
->Request
.Type
.Type
= cmd_type
;
2396 if (cmd_type
== TYPE_CMD
) {
2399 /* are we trying to read a vital product page */
2400 if (page_code
!= 0) {
2401 c
->Request
.CDB
[1] = 0x01;
2402 c
->Request
.CDB
[2] = page_code
;
2404 c
->Request
.CDBLen
= 6;
2405 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2406 c
->Request
.Type
.Direction
= XFER_READ
;
2407 c
->Request
.Timeout
= 0;
2408 c
->Request
.CDB
[0] = CISS_INQUIRY
;
2409 c
->Request
.CDB
[4] = size
& 0xFF;
2411 case CISS_REPORT_LOG
:
2412 case CISS_REPORT_PHYS
:
2413 /* Talking to controller so It's a physical command
2414 mode = 00 target = 0. Nothing to write.
2416 c
->Request
.CDBLen
= 12;
2417 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2418 c
->Request
.Type
.Direction
= XFER_READ
;
2419 c
->Request
.Timeout
= 0;
2420 c
->Request
.CDB
[0] = cmd
;
2421 c
->Request
.CDB
[6] = (size
>> 24) & 0xFF; //MSB
2422 c
->Request
.CDB
[7] = (size
>> 16) & 0xFF;
2423 c
->Request
.CDB
[8] = (size
>> 8) & 0xFF;
2424 c
->Request
.CDB
[9] = size
& 0xFF;
2427 case CCISS_READ_CAPACITY
:
2428 c
->Request
.CDBLen
= 10;
2429 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2430 c
->Request
.Type
.Direction
= XFER_READ
;
2431 c
->Request
.Timeout
= 0;
2432 c
->Request
.CDB
[0] = cmd
;
2434 case CCISS_READ_CAPACITY_16
:
2435 c
->Request
.CDBLen
= 16;
2436 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2437 c
->Request
.Type
.Direction
= XFER_READ
;
2438 c
->Request
.Timeout
= 0;
2439 c
->Request
.CDB
[0] = cmd
;
2440 c
->Request
.CDB
[1] = 0x10;
2441 c
->Request
.CDB
[10] = (size
>> 24) & 0xFF;
2442 c
->Request
.CDB
[11] = (size
>> 16) & 0xFF;
2443 c
->Request
.CDB
[12] = (size
>> 8) & 0xFF;
2444 c
->Request
.CDB
[13] = size
& 0xFF;
2445 c
->Request
.Timeout
= 0;
2446 c
->Request
.CDB
[0] = cmd
;
2448 case CCISS_CACHE_FLUSH
:
2449 c
->Request
.CDBLen
= 12;
2450 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2451 c
->Request
.Type
.Direction
= XFER_WRITE
;
2452 c
->Request
.Timeout
= 0;
2453 c
->Request
.CDB
[0] = BMIC_WRITE
;
2454 c
->Request
.CDB
[6] = BMIC_CACHE_FLUSH
;
2456 case TEST_UNIT_READY
:
2457 c
->Request
.CDBLen
= 6;
2458 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2459 c
->Request
.Type
.Direction
= XFER_NONE
;
2460 c
->Request
.Timeout
= 0;
2464 "cciss%d: Unknown Command 0x%c\n", ctlr
, cmd
);
2467 } else if (cmd_type
== TYPE_MSG
) {
2469 case 0: /* ABORT message */
2470 c
->Request
.CDBLen
= 12;
2471 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2472 c
->Request
.Type
.Direction
= XFER_WRITE
;
2473 c
->Request
.Timeout
= 0;
2474 c
->Request
.CDB
[0] = cmd
; /* abort */
2475 c
->Request
.CDB
[1] = 0; /* abort a command */
2476 /* buff contains the tag of the command to abort */
2477 memcpy(&c
->Request
.CDB
[4], buff
, 8);
2479 case 1: /* RESET message */
2480 c
->Request
.CDBLen
= 16;
2481 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2482 c
->Request
.Type
.Direction
= XFER_NONE
;
2483 c
->Request
.Timeout
= 0;
2484 memset(&c
->Request
.CDB
[0], 0, sizeof(c
->Request
.CDB
));
2485 c
->Request
.CDB
[0] = cmd
; /* reset */
2486 c
->Request
.CDB
[1] = 0x03; /* reset a target */
2488 case 3: /* No-Op message */
2489 c
->Request
.CDBLen
= 1;
2490 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2491 c
->Request
.Type
.Direction
= XFER_WRITE
;
2492 c
->Request
.Timeout
= 0;
2493 c
->Request
.CDB
[0] = cmd
;
2497 "cciss%d: unknown message type %d\n", ctlr
, cmd
);
2502 "cciss%d: unknown command type %d\n", ctlr
, cmd_type
);
2505 /* Fill in the scatter gather information */
2507 buff_dma_handle
.val
= (__u64
) pci_map_single(h
->pdev
,
2509 PCI_DMA_BIDIRECTIONAL
);
2510 c
->SG
[0].Addr
.lower
= buff_dma_handle
.val32
.lower
;
2511 c
->SG
[0].Addr
.upper
= buff_dma_handle
.val32
.upper
;
2512 c
->SG
[0].Len
= size
;
2513 c
->SG
[0].Ext
= 0; /* we are not chaining */
2518 static int check_target_status(ctlr_info_t
*h
, CommandList_struct
*c
)
2520 switch (c
->err_info
->ScsiStatus
) {
2523 case SAM_STAT_CHECK_CONDITION
:
2524 switch (0xf & c
->err_info
->SenseInfo
[2]) {
2525 case 0: return IO_OK
; /* no sense */
2526 case 1: return IO_OK
; /* recovered error */
2528 printk(KERN_WARNING
"cciss%d: cmd 0x%02x "
2529 "check condition, sense key = 0x%02x\n",
2530 h
->ctlr
, c
->Request
.CDB
[0],
2531 c
->err_info
->SenseInfo
[2]);
2535 printk(KERN_WARNING
"cciss%d: cmd 0x%02x"
2536 "scsi status = 0x%02x\n", h
->ctlr
,
2537 c
->Request
.CDB
[0], c
->err_info
->ScsiStatus
);
2543 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
)
2545 int return_status
= IO_OK
;
2547 if (c
->err_info
->CommandStatus
== CMD_SUCCESS
)
2550 switch (c
->err_info
->CommandStatus
) {
2551 case CMD_TARGET_STATUS
:
2552 return_status
= check_target_status(h
, c
);
2554 case CMD_DATA_UNDERRUN
:
2555 case CMD_DATA_OVERRUN
:
2556 /* expected for inquiry and report lun commands */
2559 printk(KERN_WARNING
"cciss: cmd 0x%02x is "
2560 "reported invalid\n", c
->Request
.CDB
[0]);
2561 return_status
= IO_ERROR
;
2563 case CMD_PROTOCOL_ERR
:
2564 printk(KERN_WARNING
"cciss: cmd 0x%02x has "
2565 "protocol error \n", c
->Request
.CDB
[0]);
2566 return_status
= IO_ERROR
;
2568 case CMD_HARDWARE_ERR
:
2569 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2570 " hardware error\n", c
->Request
.CDB
[0]);
2571 return_status
= IO_ERROR
;
2573 case CMD_CONNECTION_LOST
:
2574 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2575 "connection lost\n", c
->Request
.CDB
[0]);
2576 return_status
= IO_ERROR
;
2579 printk(KERN_WARNING
"cciss: cmd 0x%02x was "
2580 "aborted\n", c
->Request
.CDB
[0]);
2581 return_status
= IO_ERROR
;
2583 case CMD_ABORT_FAILED
:
2584 printk(KERN_WARNING
"cciss: cmd 0x%02x reports "
2585 "abort failed\n", c
->Request
.CDB
[0]);
2586 return_status
= IO_ERROR
;
2588 case CMD_UNSOLICITED_ABORT
:
2590 "cciss%d: unsolicited abort 0x%02x\n", h
->ctlr
,
2592 return_status
= IO_NEEDS_RETRY
;
2595 printk(KERN_WARNING
"cciss: cmd 0x%02x returned "
2596 "unknown status %x\n", c
->Request
.CDB
[0],
2597 c
->err_info
->CommandStatus
);
2598 return_status
= IO_ERROR
;
2600 return return_status
;
2603 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
2606 DECLARE_COMPLETION_ONSTACK(wait
);
2607 u64bit buff_dma_handle
;
2608 unsigned long flags
;
2609 int return_status
= IO_OK
;
2613 /* Put the request on the tail of the queue and send it */
2614 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2618 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2620 wait_for_completion(&wait
);
2622 if (c
->err_info
->CommandStatus
== 0 || !attempt_retry
)
2625 return_status
= process_sendcmd_error(h
, c
);
2627 if (return_status
== IO_NEEDS_RETRY
&&
2628 c
->retry_count
< MAX_CMD_RETRIES
) {
2629 printk(KERN_WARNING
"cciss%d: retrying 0x%02x\n", h
->ctlr
,
2632 /* erase the old error information */
2633 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2634 return_status
= IO_OK
;
2635 INIT_COMPLETION(wait
);
2640 /* unlock the buffers from DMA */
2641 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2642 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2643 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2644 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2645 return return_status
;
2648 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
2649 __u8 page_code
, unsigned char scsi3addr
[],
2652 ctlr_info_t
*h
= hba
[ctlr
];
2653 CommandList_struct
*c
;
2656 c
= cmd_alloc(h
, 0);
2659 return_status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, page_code
,
2660 scsi3addr
, cmd_type
);
2661 if (return_status
== IO_OK
)
2662 return_status
= sendcmd_withirq_core(h
, c
, 1);
2665 return return_status
;
2668 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
2669 int withirq
, sector_t total_size
,
2670 unsigned int block_size
,
2671 InquiryData_struct
*inq_buff
,
2672 drive_info_struct
*drv
)
2676 unsigned char scsi3addr
[8];
2678 memset(inq_buff
, 0, sizeof(InquiryData_struct
));
2679 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2681 return_code
= sendcmd_withirq(CISS_INQUIRY
, ctlr
,
2682 inq_buff
, sizeof(*inq_buff
),
2683 0xC1, scsi3addr
, TYPE_CMD
);
2685 return_code
= sendcmd(CISS_INQUIRY
, ctlr
, inq_buff
,
2686 sizeof(*inq_buff
), 0xC1, scsi3addr
,
2688 if (return_code
== IO_OK
) {
2689 if (inq_buff
->data_byte
[8] == 0xFF) {
2691 "cciss: reading geometry failed, volume "
2692 "does not support reading geometry\n");
2694 drv
->sectors
= 32; // Sectors per track
2695 drv
->cylinders
= total_size
+ 1;
2696 drv
->raid_level
= RAID_UNKNOWN
;
2698 drv
->heads
= inq_buff
->data_byte
[6];
2699 drv
->sectors
= inq_buff
->data_byte
[7];
2700 drv
->cylinders
= (inq_buff
->data_byte
[4] & 0xff) << 8;
2701 drv
->cylinders
+= inq_buff
->data_byte
[5];
2702 drv
->raid_level
= inq_buff
->data_byte
[8];
2704 drv
->block_size
= block_size
;
2705 drv
->nr_blocks
= total_size
+ 1;
2706 t
= drv
->heads
* drv
->sectors
;
2708 sector_t real_size
= total_size
+ 1;
2709 unsigned long rem
= sector_div(real_size
, t
);
2712 drv
->cylinders
= real_size
;
2714 } else { /* Get geometry failed */
2715 printk(KERN_WARNING
"cciss: reading geometry failed\n");
2720 cciss_read_capacity(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
,
2721 unsigned int *block_size
)
2723 ReadCapdata_struct
*buf
;
2725 unsigned char scsi3addr
[8];
2727 buf
= kzalloc(sizeof(ReadCapdata_struct
), GFP_KERNEL
);
2729 printk(KERN_WARNING
"cciss: out of memory\n");
2733 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2735 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY
,
2736 ctlr
, buf
, sizeof(ReadCapdata_struct
),
2737 0, scsi3addr
, TYPE_CMD
);
2739 return_code
= sendcmd(CCISS_READ_CAPACITY
,
2740 ctlr
, buf
, sizeof(ReadCapdata_struct
),
2741 0, scsi3addr
, TYPE_CMD
);
2742 if (return_code
== IO_OK
) {
2743 *total_size
= be32_to_cpu(*(__be32
*) buf
->total_size
);
2744 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2745 } else { /* read capacity command failed */
2746 printk(KERN_WARNING
"cciss: read capacity failed\n");
2748 *block_size
= BLOCK_SIZE
;
2754 cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
, unsigned int *block_size
)
2756 ReadCapdata_struct_16
*buf
;
2758 unsigned char scsi3addr
[8];
2760 buf
= kzalloc(sizeof(ReadCapdata_struct_16
), GFP_KERNEL
);
2762 printk(KERN_WARNING
"cciss: out of memory\n");
2766 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2768 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY_16
,
2769 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2770 0, scsi3addr
, TYPE_CMD
);
2773 return_code
= sendcmd(CCISS_READ_CAPACITY_16
,
2774 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2775 0, scsi3addr
, TYPE_CMD
);
2777 if (return_code
== IO_OK
) {
2778 *total_size
= be64_to_cpu(*(__be64
*) buf
->total_size
);
2779 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2780 } else { /* read capacity command failed */
2781 printk(KERN_WARNING
"cciss: read capacity failed\n");
2783 *block_size
= BLOCK_SIZE
;
2785 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2786 (unsigned long long)*total_size
+1, *block_size
);
2790 static int cciss_revalidate(struct gendisk
*disk
)
2792 ctlr_info_t
*h
= get_host(disk
);
2793 drive_info_struct
*drv
= get_drv(disk
);
2796 unsigned int block_size
;
2797 sector_t total_size
;
2798 InquiryData_struct
*inq_buff
= NULL
;
2800 for (logvol
= 0; logvol
< CISS_MAX_LUN
; logvol
++) {
2801 if (memcmp(h
->drv
[logvol
]->LunID
, drv
->LunID
,
2802 sizeof(drv
->LunID
)) == 0) {
2811 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
2812 if (inq_buff
== NULL
) {
2813 printk(KERN_WARNING
"cciss: out of memory\n");
2816 if (h
->cciss_read
== CCISS_READ_10
) {
2817 cciss_read_capacity(h
->ctlr
, logvol
, 1,
2818 &total_size
, &block_size
);
2820 cciss_read_capacity_16(h
->ctlr
, logvol
, 1,
2821 &total_size
, &block_size
);
2823 cciss_geometry_inquiry(h
->ctlr
, logvol
, 1, total_size
, block_size
,
2826 blk_queue_logical_block_size(drv
->queue
, drv
->block_size
);
2827 set_capacity(disk
, drv
->nr_blocks
);
2834 * Wait polling for a command to complete.
2835 * The memory mapped FIFO is polled for the completion.
2836 * Used only at init time, interrupts from the HBA are disabled.
2838 static unsigned long pollcomplete(int ctlr
)
2843 /* Wait (up to 20 seconds) for a command to complete */
2845 for (i
= 20 * HZ
; i
> 0; i
--) {
2846 done
= hba
[ctlr
]->access
.command_completed(hba
[ctlr
]);
2847 if (done
== FIFO_EMPTY
)
2848 schedule_timeout_uninterruptible(1);
2852 /* Invalid address to tell caller we ran out of time */
2856 /* Send command c to controller h and poll for it to complete.
2857 * Turns interrupts off on the board. Used at driver init time
2858 * and during SCSI error recovery.
2860 static int sendcmd_core(ctlr_info_t
*h
, CommandList_struct
*c
)
2863 unsigned long complete
;
2864 int status
= IO_ERROR
;
2865 u64bit buff_dma_handle
;
2869 /* Disable interrupt on the board. */
2870 h
->access
.set_intr_mask(h
, CCISS_INTR_OFF
);
2872 /* Make sure there is room in the command FIFO */
2873 /* Actually it should be completely empty at this time */
2874 /* unless we are in here doing error handling for the scsi */
2875 /* tape side of the driver. */
2876 for (i
= 200000; i
> 0; i
--) {
2877 /* if fifo isn't full go */
2878 if (!(h
->access
.fifo_full(h
)))
2881 printk(KERN_WARNING
"cciss cciss%d: SendCmd FIFO full,"
2882 " waiting!\n", h
->ctlr
);
2884 h
->access
.submit_command(h
, c
); /* Send the cmd */
2886 complete
= pollcomplete(h
->ctlr
);
2889 printk(KERN_DEBUG
"cciss: command completed\n");
2890 #endif /* CCISS_DEBUG */
2892 if (complete
== 1) {
2894 "cciss cciss%d: SendCmd Timeout out, "
2895 "No command list address returned!\n", h
->ctlr
);
2900 /* Make sure it's the command we're expecting. */
2901 if ((complete
& ~CISS_ERROR_BIT
) != c
->busaddr
) {
2902 printk(KERN_WARNING
"cciss%d: Unexpected command "
2903 "completion.\n", h
->ctlr
);
2907 /* It is our command. If no error, we're done. */
2908 if (!(complete
& CISS_ERROR_BIT
)) {
2913 /* There is an error... */
2915 /* if data overrun or underun on Report command ignore it */
2916 if (((c
->Request
.CDB
[0] == CISS_REPORT_LOG
) ||
2917 (c
->Request
.CDB
[0] == CISS_REPORT_PHYS
) ||
2918 (c
->Request
.CDB
[0] == CISS_INQUIRY
)) &&
2919 ((c
->err_info
->CommandStatus
== CMD_DATA_OVERRUN
) ||
2920 (c
->err_info
->CommandStatus
== CMD_DATA_UNDERRUN
))) {
2921 complete
= c
->busaddr
;
2926 if (c
->err_info
->CommandStatus
== CMD_UNSOLICITED_ABORT
) {
2927 printk(KERN_WARNING
"cciss%d: unsolicited abort %p\n",
2929 if (c
->retry_count
< MAX_CMD_RETRIES
) {
2930 printk(KERN_WARNING
"cciss%d: retrying %p\n",
2933 /* erase the old error information */
2934 memset(c
->err_info
, 0, sizeof(c
->err_info
));
2937 printk(KERN_WARNING
"cciss%d: retried %p too many "
2938 "times\n", h
->ctlr
, c
);
2943 if (c
->err_info
->CommandStatus
== CMD_UNABORTABLE
) {
2944 printk(KERN_WARNING
"cciss%d: command could not be "
2945 "aborted.\n", h
->ctlr
);
2950 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
) {
2951 status
= check_target_status(h
, c
);
2955 printk(KERN_WARNING
"cciss%d: sendcmd error\n", h
->ctlr
);
2956 printk(KERN_WARNING
"cmd = 0x%02x, CommandStatus = 0x%02x\n",
2957 c
->Request
.CDB
[0], c
->err_info
->CommandStatus
);
2963 /* unlock the data buffer from DMA */
2964 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2965 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2966 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2967 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2972 * Send a command to the controller, and wait for it to complete.
2973 * Used at init time, and during SCSI error recovery.
2975 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
2976 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
)
2978 CommandList_struct
*c
;
2981 c
= cmd_alloc(hba
[ctlr
], 1);
2983 printk(KERN_WARNING
"cciss: unable to get memory");
2986 status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, page_code
,
2987 scsi3addr
, cmd_type
);
2988 if (status
== IO_OK
)
2989 status
= sendcmd_core(hba
[ctlr
], c
);
2990 cmd_free(hba
[ctlr
], c
, 1);
2995 * Map (physical) PCI mem into (virtual) kernel space
2997 static void __iomem
*remap_pci_mem(ulong base
, ulong size
)
2999 ulong page_base
= ((ulong
) base
) & PAGE_MASK
;
3000 ulong page_offs
= ((ulong
) base
) - page_base
;
3001 void __iomem
*page_remapped
= ioremap(page_base
, page_offs
+ size
);
3003 return page_remapped
? (page_remapped
+ page_offs
) : NULL
;
3007 * Takes jobs of the Q and sends them to the hardware, then puts it on
3008 * the Q to wait for completion.
3010 static void start_io(ctlr_info_t
*h
)
3012 CommandList_struct
*c
;
3014 while (!hlist_empty(&h
->reqQ
)) {
3015 c
= hlist_entry(h
->reqQ
.first
, CommandList_struct
, list
);
3016 /* can't do anything if fifo is full */
3017 if ((h
->access
.fifo_full(h
))) {
3018 printk(KERN_WARNING
"cciss: fifo full\n");
3022 /* Get the first entry from the Request Q */
3026 /* Tell the controller execute command */
3027 h
->access
.submit_command(h
, c
);
3029 /* Put job onto the completed Q */
3034 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
3035 /* Zeros out the error record and then resends the command back */
3036 /* to the controller */
3037 static inline void resend_cciss_cmd(ctlr_info_t
*h
, CommandList_struct
*c
)
3039 /* erase the old error information */
3040 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
3042 /* add it to software queue and then send it to the controller */
3045 if (h
->Qdepth
> h
->maxQsinceinit
)
3046 h
->maxQsinceinit
= h
->Qdepth
;
3051 static inline unsigned int make_status_bytes(unsigned int scsi_status_byte
,
3052 unsigned int msg_byte
, unsigned int host_byte
,
3053 unsigned int driver_byte
)
3055 /* inverse of macros in scsi.h */
3056 return (scsi_status_byte
& 0xff) |
3057 ((msg_byte
& 0xff) << 8) |
3058 ((host_byte
& 0xff) << 16) |
3059 ((driver_byte
& 0xff) << 24);
3062 static inline int evaluate_target_status(ctlr_info_t
*h
,
3063 CommandList_struct
*cmd
, int *retry_cmd
)
3065 unsigned char sense_key
;
3066 unsigned char status_byte
, msg_byte
, host_byte
, driver_byte
;
3070 /* If we get in here, it means we got "target status", that is, scsi status */
3071 status_byte
= cmd
->err_info
->ScsiStatus
;
3072 driver_byte
= DRIVER_OK
;
3073 msg_byte
= cmd
->err_info
->CommandStatus
; /* correct? seems too device specific */
3075 if (blk_pc_request(cmd
->rq
))
3076 host_byte
= DID_PASSTHROUGH
;
3080 error_value
= make_status_bytes(status_byte
, msg_byte
,
3081 host_byte
, driver_byte
);
3083 if (cmd
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
) {
3084 if (!blk_pc_request(cmd
->rq
))
3085 printk(KERN_WARNING
"cciss: cmd %p "
3086 "has SCSI Status 0x%x\n",
3087 cmd
, cmd
->err_info
->ScsiStatus
);
3091 /* check the sense key */
3092 sense_key
= 0xf & cmd
->err_info
->SenseInfo
[2];
3093 /* no status or recovered error */
3094 if (((sense_key
== 0x0) || (sense_key
== 0x1)) && !blk_pc_request(cmd
->rq
))
3097 if (check_for_unit_attention(h
, cmd
)) {
3098 *retry_cmd
= !blk_pc_request(cmd
->rq
);
3102 if (!blk_pc_request(cmd
->rq
)) { /* Not SG_IO or similar? */
3103 if (error_value
!= 0)
3104 printk(KERN_WARNING
"cciss: cmd %p has CHECK CONDITION"
3105 " sense key = 0x%x\n", cmd
, sense_key
);
3109 /* SG_IO or similar, copy sense data back */
3110 if (cmd
->rq
->sense
) {
3111 if (cmd
->rq
->sense_len
> cmd
->err_info
->SenseLen
)
3112 cmd
->rq
->sense_len
= cmd
->err_info
->SenseLen
;
3113 memcpy(cmd
->rq
->sense
, cmd
->err_info
->SenseInfo
,
3114 cmd
->rq
->sense_len
);
3116 cmd
->rq
->sense_len
= 0;
3121 /* checks the status of the job and calls complete buffers to mark all
3122 * buffers for the completed job. Note that this function does not need
3123 * to hold the hba/queue lock.
3125 static inline void complete_command(ctlr_info_t
*h
, CommandList_struct
*cmd
,
3129 struct request
*rq
= cmd
->rq
;
3134 rq
->errors
= make_status_bytes(0, 0, 0, DRIVER_TIMEOUT
);
3136 if (cmd
->err_info
->CommandStatus
== 0) /* no error has occurred */
3137 goto after_error_processing
;
3139 switch (cmd
->err_info
->CommandStatus
) {
3140 case CMD_TARGET_STATUS
:
3141 rq
->errors
= evaluate_target_status(h
, cmd
, &retry_cmd
);
3143 case CMD_DATA_UNDERRUN
:
3144 if (blk_fs_request(cmd
->rq
)) {
3145 printk(KERN_WARNING
"cciss: cmd %p has"
3146 " completed with data underrun "
3148 cmd
->rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
3151 case CMD_DATA_OVERRUN
:
3152 if (blk_fs_request(cmd
->rq
))
3153 printk(KERN_WARNING
"cciss: cmd %p has"
3154 " completed with data overrun "
3158 printk(KERN_WARNING
"cciss: cmd %p is "
3159 "reported invalid\n", cmd
);
3160 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3161 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3162 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3164 case CMD_PROTOCOL_ERR
:
3165 printk(KERN_WARNING
"cciss: cmd %p has "
3166 "protocol error \n", cmd
);
3167 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3168 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3169 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3171 case CMD_HARDWARE_ERR
:
3172 printk(KERN_WARNING
"cciss: cmd %p had "
3173 " hardware error\n", cmd
);
3174 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3175 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3176 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3178 case CMD_CONNECTION_LOST
:
3179 printk(KERN_WARNING
"cciss: cmd %p had "
3180 "connection lost\n", cmd
);
3181 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3182 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3183 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3186 printk(KERN_WARNING
"cciss: cmd %p was "
3188 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3189 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3190 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ABORT
);
3192 case CMD_ABORT_FAILED
:
3193 printk(KERN_WARNING
"cciss: cmd %p reports "
3194 "abort failed\n", cmd
);
3195 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3196 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3197 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3199 case CMD_UNSOLICITED_ABORT
:
3200 printk(KERN_WARNING
"cciss%d: unsolicited "
3201 "abort %p\n", h
->ctlr
, cmd
);
3202 if (cmd
->retry_count
< MAX_CMD_RETRIES
) {
3205 "cciss%d: retrying %p\n", h
->ctlr
, cmd
);
3209 "cciss%d: %p retried too "
3210 "many times\n", h
->ctlr
, cmd
);
3211 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3212 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3213 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ABORT
);
3216 printk(KERN_WARNING
"cciss: cmd %p timedout\n", cmd
);
3217 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3218 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3219 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3222 printk(KERN_WARNING
"cciss: cmd %p returned "
3223 "unknown status %x\n", cmd
,
3224 cmd
->err_info
->CommandStatus
);
3225 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3226 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3227 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3230 after_error_processing
:
3232 /* We need to return this command */
3234 resend_cciss_cmd(h
, cmd
);
3237 cmd
->rq
->completion_data
= cmd
;
3238 blk_complete_request(cmd
->rq
);
3242 * Get a request and submit it to the controller.
3244 static void do_cciss_request(struct request_queue
*q
)
3246 ctlr_info_t
*h
= q
->queuedata
;
3247 CommandList_struct
*c
;
3250 struct request
*creq
;
3252 struct scatterlist tmp_sg
[MAXSGENTRIES
];
3253 drive_info_struct
*drv
;
3256 /* We call start_io here in case there is a command waiting on the
3257 * queue that has not been sent.
3259 if (blk_queue_plugged(q
))
3263 creq
= blk_peek_request(q
);
3267 BUG_ON(creq
->nr_phys_segments
> MAXSGENTRIES
);
3269 if ((c
= cmd_alloc(h
, 1)) == NULL
)
3272 blk_start_request(creq
);
3274 spin_unlock_irq(q
->queue_lock
);
3276 c
->cmd_type
= CMD_RWREQ
;
3279 /* fill in the request */
3280 drv
= creq
->rq_disk
->private_data
;
3281 c
->Header
.ReplyQueue
= 0; // unused in simple mode
3282 /* got command from pool, so use the command block index instead */
3283 /* for direct lookups. */
3284 /* The first 2 bits are reserved for controller error reporting. */
3285 c
->Header
.Tag
.lower
= (c
->cmdindex
<< 3);
3286 c
->Header
.Tag
.lower
|= 0x04; /* flag for direct lookup. */
3287 memcpy(&c
->Header
.LUN
, drv
->LunID
, sizeof(drv
->LunID
));
3288 c
->Request
.CDBLen
= 10; // 12 byte commands not in FW yet;
3289 c
->Request
.Type
.Type
= TYPE_CMD
; // It is a command.
3290 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
3291 c
->Request
.Type
.Direction
=
3292 (rq_data_dir(creq
) == READ
) ? XFER_READ
: XFER_WRITE
;
3293 c
->Request
.Timeout
= 0; // Don't time out
3295 (rq_data_dir(creq
) == READ
) ? h
->cciss_read
: h
->cciss_write
;
3296 start_blk
= blk_rq_pos(creq
);
3298 printk(KERN_DEBUG
"ciss: sector =%d nr_sectors=%d\n",
3299 (int)blk_rq_pos(creq
), (int)blk_rq_sectors(creq
));
3300 #endif /* CCISS_DEBUG */
3302 sg_init_table(tmp_sg
, MAXSGENTRIES
);
3303 seg
= blk_rq_map_sg(q
, creq
, tmp_sg
);
3305 /* get the DMA records for the setup */
3306 if (c
->Request
.Type
.Direction
== XFER_READ
)
3307 dir
= PCI_DMA_FROMDEVICE
;
3309 dir
= PCI_DMA_TODEVICE
;
3311 for (i
= 0; i
< seg
; i
++) {
3312 c
->SG
[i
].Len
= tmp_sg
[i
].length
;
3313 temp64
.val
= (__u64
) pci_map_page(h
->pdev
, sg_page(&tmp_sg
[i
]),
3315 tmp_sg
[i
].length
, dir
);
3316 c
->SG
[i
].Addr
.lower
= temp64
.val32
.lower
;
3317 c
->SG
[i
].Addr
.upper
= temp64
.val32
.upper
;
3318 c
->SG
[i
].Ext
= 0; // we are not chaining
3320 /* track how many SG entries we are using */
3325 printk(KERN_DEBUG
"cciss: Submitting %u sectors in %d segments\n",
3326 blk_rq_sectors(creq
), seg
);
3327 #endif /* CCISS_DEBUG */
3329 c
->Header
.SGList
= c
->Header
.SGTotal
= seg
;
3330 if (likely(blk_fs_request(creq
))) {
3331 if(h
->cciss_read
== CCISS_READ_10
) {
3332 c
->Request
.CDB
[1] = 0;
3333 c
->Request
.CDB
[2] = (start_blk
>> 24) & 0xff; //MSB
3334 c
->Request
.CDB
[3] = (start_blk
>> 16) & 0xff;
3335 c
->Request
.CDB
[4] = (start_blk
>> 8) & 0xff;
3336 c
->Request
.CDB
[5] = start_blk
& 0xff;
3337 c
->Request
.CDB
[6] = 0; // (sect >> 24) & 0xff; MSB
3338 c
->Request
.CDB
[7] = (blk_rq_sectors(creq
) >> 8) & 0xff;
3339 c
->Request
.CDB
[8] = blk_rq_sectors(creq
) & 0xff;
3340 c
->Request
.CDB
[9] = c
->Request
.CDB
[11] = c
->Request
.CDB
[12] = 0;
3342 u32 upper32
= upper_32_bits(start_blk
);
3344 c
->Request
.CDBLen
= 16;
3345 c
->Request
.CDB
[1]= 0;
3346 c
->Request
.CDB
[2]= (upper32
>> 24) & 0xff; //MSB
3347 c
->Request
.CDB
[3]= (upper32
>> 16) & 0xff;
3348 c
->Request
.CDB
[4]= (upper32
>> 8) & 0xff;
3349 c
->Request
.CDB
[5]= upper32
& 0xff;
3350 c
->Request
.CDB
[6]= (start_blk
>> 24) & 0xff;
3351 c
->Request
.CDB
[7]= (start_blk
>> 16) & 0xff;
3352 c
->Request
.CDB
[8]= (start_blk
>> 8) & 0xff;
3353 c
->Request
.CDB
[9]= start_blk
& 0xff;
3354 c
->Request
.CDB
[10]= (blk_rq_sectors(creq
) >> 24) & 0xff;
3355 c
->Request
.CDB
[11]= (blk_rq_sectors(creq
) >> 16) & 0xff;
3356 c
->Request
.CDB
[12]= (blk_rq_sectors(creq
) >> 8) & 0xff;
3357 c
->Request
.CDB
[13]= blk_rq_sectors(creq
) & 0xff;
3358 c
->Request
.CDB
[14] = c
->Request
.CDB
[15] = 0;
3360 } else if (blk_pc_request(creq
)) {
3361 c
->Request
.CDBLen
= creq
->cmd_len
;
3362 memcpy(c
->Request
.CDB
, creq
->cmd
, BLK_MAX_CDB
);
3364 printk(KERN_WARNING
"cciss%d: bad request type %d\n", h
->ctlr
, creq
->cmd_type
);
3368 spin_lock_irq(q
->queue_lock
);
3372 if (h
->Qdepth
> h
->maxQsinceinit
)
3373 h
->maxQsinceinit
= h
->Qdepth
;
3379 /* We will already have the driver lock here so not need
3385 static inline unsigned long get_next_completion(ctlr_info_t
*h
)
3387 return h
->access
.command_completed(h
);
3390 static inline int interrupt_pending(ctlr_info_t
*h
)
3392 return h
->access
.intr_pending(h
);
3395 static inline long interrupt_not_for_us(ctlr_info_t
*h
)
3397 return (((h
->access
.intr_pending(h
) == 0) ||
3398 (h
->interrupts_enabled
== 0)));
3401 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
)
3403 ctlr_info_t
*h
= dev_id
;
3404 CommandList_struct
*c
;
3405 unsigned long flags
;
3408 if (interrupt_not_for_us(h
))
3411 * If there are completed commands in the completion queue,
3412 * we had better do something about it.
3414 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
3415 while (interrupt_pending(h
)) {
3416 while ((a
= get_next_completion(h
)) != FIFO_EMPTY
) {
3420 if (a2
>= h
->nr_cmds
) {
3422 "cciss: controller cciss%d failed, stopping.\n",
3424 fail_all_cmds(h
->ctlr
);
3428 c
= h
->cmd_pool
+ a2
;
3432 struct hlist_node
*tmp
;
3436 hlist_for_each_entry(c
, tmp
, &h
->cmpQ
, list
) {
3437 if (c
->busaddr
== a
)
3442 * If we've found the command, take it off the
3443 * completion Q and free it
3445 if (c
&& c
->busaddr
== a
) {
3447 if (c
->cmd_type
== CMD_RWREQ
) {
3448 complete_command(h
, c
, 0);
3449 } else if (c
->cmd_type
== CMD_IOCTL_PEND
) {
3450 complete(c
->waiting
);
3452 # ifdef CONFIG_CISS_SCSI_TAPE
3453 else if (c
->cmd_type
== CMD_SCSI
)
3454 complete_scsi_command(c
, 0, a1
);
3461 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
3466 * add_to_scan_list() - add controller to rescan queue
3467 * @h: Pointer to the controller.
3469 * Adds the controller to the rescan queue if not already on the queue.
3471 * returns 1 if added to the queue, 0 if skipped (could be on the
3472 * queue already, or the controller could be initializing or shutting
3475 static int add_to_scan_list(struct ctlr_info
*h
)
3477 struct ctlr_info
*test_h
;
3481 if (h
->busy_initializing
)
3484 if (!mutex_trylock(&h
->busy_shutting_down
))
3487 mutex_lock(&scan_mutex
);
3488 list_for_each_entry(test_h
, &scan_q
, scan_list
) {
3494 if (!found
&& !h
->busy_scanning
) {
3495 INIT_COMPLETION(h
->scan_wait
);
3496 list_add_tail(&h
->scan_list
, &scan_q
);
3499 mutex_unlock(&scan_mutex
);
3500 mutex_unlock(&h
->busy_shutting_down
);
3506 * remove_from_scan_list() - remove controller from rescan queue
3507 * @h: Pointer to the controller.
3509 * Removes the controller from the rescan queue if present. Blocks if
3510 * the controller is currently conducting a rescan.
3512 static void remove_from_scan_list(struct ctlr_info
*h
)
3514 struct ctlr_info
*test_h
, *tmp_h
;
3517 mutex_lock(&scan_mutex
);
3518 list_for_each_entry_safe(test_h
, tmp_h
, &scan_q
, scan_list
) {
3520 list_del(&h
->scan_list
);
3521 complete_all(&h
->scan_wait
);
3522 mutex_unlock(&scan_mutex
);
3526 if (&h
->busy_scanning
)
3528 mutex_unlock(&scan_mutex
);
3531 wait_for_completion(&h
->scan_wait
);
3535 * scan_thread() - kernel thread used to rescan controllers
3538 * A kernel thread used scan for drive topology changes on
3539 * controllers. The thread processes only one controller at a time
3540 * using a queue. Controllers are added to the queue using
3541 * add_to_scan_list() and removed from the queue either after done
3542 * processing or using remove_from_scan_list().
3546 static int scan_thread(void *data
)
3548 struct ctlr_info
*h
;
3551 set_current_state(TASK_INTERRUPTIBLE
);
3553 if (kthread_should_stop())
3557 mutex_lock(&scan_mutex
);
3558 if (list_empty(&scan_q
)) {
3559 mutex_unlock(&scan_mutex
);
3563 h
= list_entry(scan_q
.next
,
3566 list_del(&h
->scan_list
);
3567 h
->busy_scanning
= 1;
3568 mutex_unlock(&scan_mutex
);
3571 rebuild_lun_table(h
, 0, 0);
3572 complete_all(&h
->scan_wait
);
3573 mutex_lock(&scan_mutex
);
3574 h
->busy_scanning
= 0;
3575 mutex_unlock(&scan_mutex
);
3583 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
)
3585 if (c
->err_info
->SenseInfo
[2] != UNIT_ATTENTION
)
3588 switch (c
->err_info
->SenseInfo
[12]) {
3590 printk(KERN_WARNING
"cciss%d: a state change "
3591 "detected, command retried\n", h
->ctlr
);
3595 printk(KERN_WARNING
"cciss%d: LUN failure "
3596 "detected, action required\n", h
->ctlr
);
3599 case REPORT_LUNS_CHANGED
:
3600 printk(KERN_WARNING
"cciss%d: report LUN data "
3601 "changed\n", h
->ctlr
);
3602 add_to_scan_list(h
);
3603 wake_up_process(cciss_scan_thread
);
3606 case POWER_OR_RESET
:
3607 printk(KERN_WARNING
"cciss%d: a power on "
3608 "or device reset detected\n", h
->ctlr
);
3611 case UNIT_ATTENTION_CLEARED
:
3612 printk(KERN_WARNING
"cciss%d: unit attention "
3613 "cleared by another initiator\n", h
->ctlr
);
3617 printk(KERN_WARNING
"cciss%d: unknown "
3618 "unit attention detected\n", h
->ctlr
);
3624 * We cannot read the structure directly, for portability we must use
3626 * This is for debug only.
3629 static void print_cfg_table(CfgTable_struct
*tb
)
3634 printk("Controller Configuration information\n");
3635 printk("------------------------------------\n");
3636 for (i
= 0; i
< 4; i
++)
3637 temp_name
[i
] = readb(&(tb
->Signature
[i
]));
3638 temp_name
[4] = '\0';
3639 printk(" Signature = %s\n", temp_name
);
3640 printk(" Spec Number = %d\n", readl(&(tb
->SpecValence
)));
3641 printk(" Transport methods supported = 0x%x\n",
3642 readl(&(tb
->TransportSupport
)));
3643 printk(" Transport methods active = 0x%x\n",
3644 readl(&(tb
->TransportActive
)));
3645 printk(" Requested transport Method = 0x%x\n",
3646 readl(&(tb
->HostWrite
.TransportRequest
)));
3647 printk(" Coalesce Interrupt Delay = 0x%x\n",
3648 readl(&(tb
->HostWrite
.CoalIntDelay
)));
3649 printk(" Coalesce Interrupt Count = 0x%x\n",
3650 readl(&(tb
->HostWrite
.CoalIntCount
)));
3651 printk(" Max outstanding commands = 0x%d\n",
3652 readl(&(tb
->CmdsOutMax
)));
3653 printk(" Bus Types = 0x%x\n", readl(&(tb
->BusTypes
)));
3654 for (i
= 0; i
< 16; i
++)
3655 temp_name
[i
] = readb(&(tb
->ServerName
[i
]));
3656 temp_name
[16] = '\0';
3657 printk(" Server Name = %s\n", temp_name
);
3658 printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb
->HeartBeat
)));
3660 #endif /* CCISS_DEBUG */
3662 static int find_PCI_BAR_index(struct pci_dev
*pdev
, unsigned long pci_bar_addr
)
3664 int i
, offset
, mem_type
, bar_type
;
3665 if (pci_bar_addr
== PCI_BASE_ADDRESS_0
) /* looking for BAR zero? */
3668 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3669 bar_type
= pci_resource_flags(pdev
, i
) & PCI_BASE_ADDRESS_SPACE
;
3670 if (bar_type
== PCI_BASE_ADDRESS_SPACE_IO
)
3673 mem_type
= pci_resource_flags(pdev
, i
) &
3674 PCI_BASE_ADDRESS_MEM_TYPE_MASK
;
3676 case PCI_BASE_ADDRESS_MEM_TYPE_32
:
3677 case PCI_BASE_ADDRESS_MEM_TYPE_1M
:
3678 offset
+= 4; /* 32 bit */
3680 case PCI_BASE_ADDRESS_MEM_TYPE_64
:
3683 default: /* reserved in PCI 2.2 */
3685 "Base address is invalid\n");
3690 if (offset
== pci_bar_addr
- PCI_BASE_ADDRESS_0
)
3696 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
3697 * controllers that are capable. If not, we use IO-APIC mode.
3700 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*c
,
3701 struct pci_dev
*pdev
, __u32 board_id
)
3703 #ifdef CONFIG_PCI_MSI
3705 struct msix_entry cciss_msix_entries
[4] = { {0, 0}, {0, 1},
3709 /* Some boards advertise MSI but don't really support it */
3710 if ((board_id
== 0x40700E11) ||
3711 (board_id
== 0x40800E11) ||
3712 (board_id
== 0x40820E11) || (board_id
== 0x40830E11))
3713 goto default_int_mode
;
3715 if (pci_find_capability(pdev
, PCI_CAP_ID_MSIX
)) {
3716 err
= pci_enable_msix(pdev
, cciss_msix_entries
, 4);
3718 c
->intr
[0] = cciss_msix_entries
[0].vector
;
3719 c
->intr
[1] = cciss_msix_entries
[1].vector
;
3720 c
->intr
[2] = cciss_msix_entries
[2].vector
;
3721 c
->intr
[3] = cciss_msix_entries
[3].vector
;
3726 printk(KERN_WARNING
"cciss: only %d MSI-X vectors "
3727 "available\n", err
);
3728 goto default_int_mode
;
3730 printk(KERN_WARNING
"cciss: MSI-X init failed %d\n",
3732 goto default_int_mode
;
3735 if (pci_find_capability(pdev
, PCI_CAP_ID_MSI
)) {
3736 if (!pci_enable_msi(pdev
)) {
3739 printk(KERN_WARNING
"cciss: MSI init failed\n");
3743 #endif /* CONFIG_PCI_MSI */
3744 /* if we get here we're going to use the default interrupt mode */
3745 c
->intr
[SIMPLE_MODE_INT
] = pdev
->irq
;
3749 static int __devinit
cciss_pci_init(ctlr_info_t
*c
, struct pci_dev
*pdev
)
3751 ushort subsystem_vendor_id
, subsystem_device_id
, command
;
3752 __u32 board_id
, scratchpad
= 0;
3754 __u32 cfg_base_addr
;
3755 __u64 cfg_base_addr_index
;
3758 /* check to see if controller has been disabled */
3759 /* BEFORE trying to enable it */
3760 (void)pci_read_config_word(pdev
, PCI_COMMAND
, &command
);
3761 if (!(command
& 0x02)) {
3763 "cciss: controller appears to be disabled\n");
3767 err
= pci_enable_device(pdev
);
3769 printk(KERN_ERR
"cciss: Unable to Enable PCI device\n");
3773 err
= pci_request_regions(pdev
, "cciss");
3775 printk(KERN_ERR
"cciss: Cannot obtain PCI resources, "
3780 subsystem_vendor_id
= pdev
->subsystem_vendor
;
3781 subsystem_device_id
= pdev
->subsystem_device
;
3782 board_id
= (((__u32
) (subsystem_device_id
<< 16) & 0xffff0000) |
3783 subsystem_vendor_id
);
3786 printk("command = %x\n", command
);
3787 printk("irq = %x\n", pdev
->irq
);
3788 printk("board_id = %x\n", board_id
);
3789 #endif /* CCISS_DEBUG */
3791 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
3792 * else we use the IO-APIC interrupt assigned to us by system ROM.
3794 cciss_interrupt_mode(c
, pdev
, board_id
);
3796 /* find the memory BAR */
3797 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3798 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
)
3801 if (i
== DEVICE_COUNT_RESOURCE
) {
3802 printk(KERN_WARNING
"cciss: No memory BAR found\n");
3804 goto err_out_free_res
;
3807 c
->paddr
= pci_resource_start(pdev
, i
); /* addressing mode bits
3812 printk("address 0 = %lx\n", c
->paddr
);
3813 #endif /* CCISS_DEBUG */
3814 c
->vaddr
= remap_pci_mem(c
->paddr
, 0x250);
3816 /* Wait for the board to become ready. (PCI hotplug needs this.)
3817 * We poll for up to 120 secs, once per 100ms. */
3818 for (i
= 0; i
< 1200; i
++) {
3819 scratchpad
= readl(c
->vaddr
+ SA5_SCRATCHPAD_OFFSET
);
3820 if (scratchpad
== CCISS_FIRMWARE_READY
)
3822 set_current_state(TASK_INTERRUPTIBLE
);
3823 schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
3825 if (scratchpad
!= CCISS_FIRMWARE_READY
) {
3826 printk(KERN_WARNING
"cciss: Board not ready. Timed out.\n");
3828 goto err_out_free_res
;
3831 /* get the address index number */
3832 cfg_base_addr
= readl(c
->vaddr
+ SA5_CTCFG_OFFSET
);
3833 cfg_base_addr
&= (__u32
) 0x0000ffff;
3835 printk("cfg base address = %x\n", cfg_base_addr
);
3836 #endif /* CCISS_DEBUG */
3837 cfg_base_addr_index
= find_PCI_BAR_index(pdev
, cfg_base_addr
);
3839 printk("cfg base address index = %llx\n",
3840 (unsigned long long)cfg_base_addr_index
);
3841 #endif /* CCISS_DEBUG */
3842 if (cfg_base_addr_index
== -1) {
3843 printk(KERN_WARNING
"cciss: Cannot find cfg_base_addr_index\n");
3845 goto err_out_free_res
;
3848 cfg_offset
= readl(c
->vaddr
+ SA5_CTMEM_OFFSET
);
3850 printk("cfg offset = %llx\n", (unsigned long long)cfg_offset
);
3851 #endif /* CCISS_DEBUG */
3852 c
->cfgtable
= remap_pci_mem(pci_resource_start(pdev
,
3853 cfg_base_addr_index
) +
3854 cfg_offset
, sizeof(CfgTable_struct
));
3855 c
->board_id
= board_id
;
3858 print_cfg_table(c
->cfgtable
);
3859 #endif /* CCISS_DEBUG */
3861 /* Some controllers support Zero Memory Raid (ZMR).
3862 * When configured in ZMR mode the number of supported
3863 * commands drops to 64. So instead of just setting an
3864 * arbitrary value we make the driver a little smarter.
3865 * We read the config table to tell us how many commands
3866 * are supported on the controller then subtract 4 to
3867 * leave a little room for ioctl calls.
3869 c
->max_commands
= readl(&(c
->cfgtable
->CmdsOutMax
));
3870 for (i
= 0; i
< ARRAY_SIZE(products
); i
++) {
3871 if (board_id
== products
[i
].board_id
) {
3872 c
->product_name
= products
[i
].product_name
;
3873 c
->access
= *(products
[i
].access
);
3874 c
->nr_cmds
= c
->max_commands
- 4;
3878 if ((readb(&c
->cfgtable
->Signature
[0]) != 'C') ||
3879 (readb(&c
->cfgtable
->Signature
[1]) != 'I') ||
3880 (readb(&c
->cfgtable
->Signature
[2]) != 'S') ||
3881 (readb(&c
->cfgtable
->Signature
[3]) != 'S')) {
3882 printk("Does not appear to be a valid CISS config table\n");
3884 goto err_out_free_res
;
3886 /* We didn't find the controller in our list. We know the
3887 * signature is valid. If it's an HP device let's try to
3888 * bind to the device and fire it up. Otherwise we bail.
3890 if (i
== ARRAY_SIZE(products
)) {
3891 if (subsystem_vendor_id
== PCI_VENDOR_ID_HP
) {
3892 c
->product_name
= products
[i
-1].product_name
;
3893 c
->access
= *(products
[i
-1].access
);
3894 c
->nr_cmds
= c
->max_commands
- 4;
3895 printk(KERN_WARNING
"cciss: This is an unknown "
3896 "Smart Array controller.\n"
3897 "cciss: Please update to the latest driver "
3898 "available from www.hp.com.\n");
3900 printk(KERN_WARNING
"cciss: Sorry, I don't know how"
3901 " to access the Smart Array controller %08lx\n"
3902 , (unsigned long)board_id
);
3904 goto err_out_free_res
;
3909 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3911 prefetch
= readl(&(c
->cfgtable
->SCSI_Prefetch
));
3913 writel(prefetch
, &(c
->cfgtable
->SCSI_Prefetch
));
3917 /* Disabling DMA prefetch and refetch for the P600.
3918 * An ASIC bug may result in accesses to invalid memory addresses.
3919 * We've disabled prefetch for some time now. Testing with XEN
3920 * kernels revealed a bug in the refetch if dom0 resides on a P600.
3922 if(board_id
== 0x3225103C) {
3925 dma_prefetch
= readl(c
->vaddr
+ I2O_DMA1_CFG
);
3926 dma_prefetch
|= 0x8000;
3927 writel(dma_prefetch
, c
->vaddr
+ I2O_DMA1_CFG
);
3928 pci_read_config_dword(pdev
, PCI_COMMAND_PARITY
, &dma_refetch
);
3930 pci_write_config_dword(pdev
, PCI_COMMAND_PARITY
, dma_refetch
);
3934 printk("Trying to put board into Simple mode\n");
3935 #endif /* CCISS_DEBUG */
3936 c
->max_commands
= readl(&(c
->cfgtable
->CmdsOutMax
));
3937 /* Update the field, and then ring the doorbell */
3938 writel(CFGTBL_Trans_Simple
, &(c
->cfgtable
->HostWrite
.TransportRequest
));
3939 writel(CFGTBL_ChangeReq
, c
->vaddr
+ SA5_DOORBELL
);
3941 /* under certain very rare conditions, this can take awhile.
3942 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3943 * as we enter this code.) */
3944 for (i
= 0; i
< MAX_CONFIG_WAIT
; i
++) {
3945 if (!(readl(c
->vaddr
+ SA5_DOORBELL
) & CFGTBL_ChangeReq
))
3947 /* delay and try again */
3948 set_current_state(TASK_INTERRUPTIBLE
);
3949 schedule_timeout(msecs_to_jiffies(1));
3953 printk(KERN_DEBUG
"I counter got to %d %x\n", i
,
3954 readl(c
->vaddr
+ SA5_DOORBELL
));
3955 #endif /* CCISS_DEBUG */
3957 print_cfg_table(c
->cfgtable
);
3958 #endif /* CCISS_DEBUG */
3960 if (!(readl(&(c
->cfgtable
->TransportActive
)) & CFGTBL_Trans_Simple
)) {
3961 printk(KERN_WARNING
"cciss: unable to get board into"
3964 goto err_out_free_res
;
3970 * Deliberately omit pci_disable_device(): it does something nasty to
3971 * Smart Array controllers that pci_enable_device does not undo
3973 pci_release_regions(pdev
);
3977 /* Function to find the first free pointer into our hba[] array
3978 * Returns -1 if no free entries are left.
3980 static int alloc_cciss_hba(void)
3984 for (i
= 0; i
< MAX_CTLR
; i
++) {
3988 p
= kzalloc(sizeof(ctlr_info_t
), GFP_KERNEL
);
3995 printk(KERN_WARNING
"cciss: This driver supports a maximum"
3996 " of %d controllers.\n", MAX_CTLR
);
3999 printk(KERN_ERR
"cciss: out of memory.\n");
4003 static void free_hba(int n
)
4005 ctlr_info_t
*h
= hba
[n
];
4009 for (i
= 0; i
< h
->highest_lun
+ 1; i
++)
4010 if (h
->gendisk
[i
] != NULL
)
4011 put_disk(h
->gendisk
[i
]);
4015 /* Send a message CDB to the firmware. */
4016 static __devinit
int cciss_message(struct pci_dev
*pdev
, unsigned char opcode
, unsigned char type
)
4019 CommandListHeader_struct CommandHeader
;
4020 RequestBlock_struct Request
;
4021 ErrDescriptor_struct ErrorDescriptor
;
4023 static const size_t cmd_sz
= sizeof(Command
) + sizeof(ErrorInfo_struct
);
4026 uint32_t paddr32
, tag
;
4027 void __iomem
*vaddr
;
4030 vaddr
= ioremap_nocache(pci_resource_start(pdev
, 0), pci_resource_len(pdev
, 0));
4034 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
4035 CCISS commands, so they must be allocated from the lower 4GiB of
4037 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
4043 cmd
= pci_alloc_consistent(pdev
, cmd_sz
, &paddr64
);
4049 /* This must fit, because of the 32-bit consistent DMA mask. Also,
4050 although there's no guarantee, we assume that the address is at
4051 least 4-byte aligned (most likely, it's page-aligned). */
4054 cmd
->CommandHeader
.ReplyQueue
= 0;
4055 cmd
->CommandHeader
.SGList
= 0;
4056 cmd
->CommandHeader
.SGTotal
= 0;
4057 cmd
->CommandHeader
.Tag
.lower
= paddr32
;
4058 cmd
->CommandHeader
.Tag
.upper
= 0;
4059 memset(&cmd
->CommandHeader
.LUN
.LunAddrBytes
, 0, 8);
4061 cmd
->Request
.CDBLen
= 16;
4062 cmd
->Request
.Type
.Type
= TYPE_MSG
;
4063 cmd
->Request
.Type
.Attribute
= ATTR_HEADOFQUEUE
;
4064 cmd
->Request
.Type
.Direction
= XFER_NONE
;
4065 cmd
->Request
.Timeout
= 0; /* Don't time out */
4066 cmd
->Request
.CDB
[0] = opcode
;
4067 cmd
->Request
.CDB
[1] = type
;
4068 memset(&cmd
->Request
.CDB
[2], 0, 14); /* the rest of the CDB is reserved */
4070 cmd
->ErrorDescriptor
.Addr
.lower
= paddr32
+ sizeof(Command
);
4071 cmd
->ErrorDescriptor
.Addr
.upper
= 0;
4072 cmd
->ErrorDescriptor
.Len
= sizeof(ErrorInfo_struct
);
4074 writel(paddr32
, vaddr
+ SA5_REQUEST_PORT_OFFSET
);
4076 for (i
= 0; i
< 10; i
++) {
4077 tag
= readl(vaddr
+ SA5_REPLY_PORT_OFFSET
);
4078 if ((tag
& ~3) == paddr32
)
4080 schedule_timeout_uninterruptible(HZ
);
4085 /* we leak the DMA buffer here ... no choice since the controller could
4086 still complete the command. */
4088 printk(KERN_ERR
"cciss: controller message %02x:%02x timed out\n",
4093 pci_free_consistent(pdev
, cmd_sz
, cmd
, paddr64
);
4096 printk(KERN_ERR
"cciss: controller message %02x:%02x failed\n",
4101 printk(KERN_INFO
"cciss: controller message %02x:%02x succeeded\n",
4106 #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
4107 #define cciss_noop(p) cciss_message(p, 3, 0)
4109 static __devinit
int cciss_reset_msi(struct pci_dev
*pdev
)
4111 /* the #defines are stolen from drivers/pci/msi.h. */
4112 #define msi_control_reg(base) (base + PCI_MSI_FLAGS)
4113 #define PCI_MSIX_FLAGS_ENABLE (1 << 15)
4118 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSI
);
4120 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
4121 if (control
& PCI_MSI_FLAGS_ENABLE
) {
4122 printk(KERN_INFO
"cciss: resetting MSI\n");
4123 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSI_FLAGS_ENABLE
);
4127 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
4129 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
4130 if (control
& PCI_MSIX_FLAGS_ENABLE
) {
4131 printk(KERN_INFO
"cciss: resetting MSI-X\n");
4132 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSIX_FLAGS_ENABLE
);
4139 /* This does a hard reset of the controller using PCI power management
4141 static __devinit
int cciss_hard_reset_controller(struct pci_dev
*pdev
)
4143 u16 pmcsr
, saved_config_space
[32];
4146 printk(KERN_INFO
"cciss: using PCI PM to reset controller\n");
4148 /* This is very nearly the same thing as
4150 pci_save_state(pci_dev);
4151 pci_set_power_state(pci_dev, PCI_D3hot);
4152 pci_set_power_state(pci_dev, PCI_D0);
4153 pci_restore_state(pci_dev);
4155 but we can't use these nice canned kernel routines on
4156 kexec, because they also check the MSI/MSI-X state in PCI
4157 configuration space and do the wrong thing when it is
4158 set/cleared. Also, the pci_save/restore_state functions
4159 violate the ordering requirements for restoring the
4160 configuration space from the CCISS document (see the
4161 comment below). So we roll our own .... */
4163 for (i
= 0; i
< 32; i
++)
4164 pci_read_config_word(pdev
, 2*i
, &saved_config_space
[i
]);
4166 pos
= pci_find_capability(pdev
, PCI_CAP_ID_PM
);
4168 printk(KERN_ERR
"cciss_reset_controller: PCI PM not supported\n");
4172 /* Quoting from the Open CISS Specification: "The Power
4173 * Management Control/Status Register (CSR) controls the power
4174 * state of the device. The normal operating state is D0,
4175 * CSR=00h. The software off state is D3, CSR=03h. To reset
4176 * the controller, place the interface device in D3 then to
4177 * D0, this causes a secondary PCI reset which will reset the
4180 /* enter the D3hot power management state */
4181 pci_read_config_word(pdev
, pos
+ PCI_PM_CTRL
, &pmcsr
);
4182 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
4184 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
4186 schedule_timeout_uninterruptible(HZ
>> 1);
4188 /* enter the D0 power management state */
4189 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
4191 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
4193 schedule_timeout_uninterruptible(HZ
>> 1);
4195 /* Restore the PCI configuration space. The Open CISS
4196 * Specification says, "Restore the PCI Configuration
4197 * Registers, offsets 00h through 60h. It is important to
4198 * restore the command register, 16-bits at offset 04h,
4199 * last. Do not restore the configuration status register,
4200 * 16-bits at offset 06h." Note that the offset is 2*i. */
4201 for (i
= 0; i
< 32; i
++) {
4202 if (i
== 2 || i
== 3)
4204 pci_write_config_word(pdev
, 2*i
, saved_config_space
[i
]);
4207 pci_write_config_word(pdev
, 4, saved_config_space
[2]);
4213 * This is it. Find all the controllers and register them. I really hate
4214 * stealing all these major device numbers.
4215 * returns the number of block devices registered.
4217 static int __devinit
cciss_init_one(struct pci_dev
*pdev
,
4218 const struct pci_device_id
*ent
)
4223 int dac
, return_code
;
4224 InquiryData_struct
*inq_buff
;
4226 if (reset_devices
) {
4227 /* Reset the controller with a PCI power-cycle */
4228 if (cciss_hard_reset_controller(pdev
) || cciss_reset_msi(pdev
))
4231 /* Now try to get the controller to respond to a no-op. Some
4232 devices (notably the HP Smart Array 5i Controller) need
4233 up to 30 seconds to respond. */
4234 for (i
=0; i
<30; i
++) {
4235 if (cciss_noop(pdev
) == 0)
4238 schedule_timeout_uninterruptible(HZ
);
4241 printk(KERN_ERR
"cciss: controller seems dead\n");
4246 i
= alloc_cciss_hba();
4250 hba
[i
]->busy_initializing
= 1;
4251 INIT_HLIST_HEAD(&hba
[i
]->cmpQ
);
4252 INIT_HLIST_HEAD(&hba
[i
]->reqQ
);
4253 mutex_init(&hba
[i
]->busy_shutting_down
);
4255 if (cciss_pci_init(hba
[i
], pdev
) != 0)
4258 sprintf(hba
[i
]->devname
, "cciss%d", i
);
4260 hba
[i
]->pdev
= pdev
;
4262 init_completion(&hba
[i
]->scan_wait
);
4264 if (cciss_create_hba_sysfs_entry(hba
[i
]))
4267 /* configure PCI DMA stuff */
4268 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64)))
4270 else if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32)))
4273 printk(KERN_ERR
"cciss: no suitable DMA available\n");
4278 * register with the major number, or get a dynamic major number
4279 * by passing 0 as argument. This is done for greater than
4280 * 8 controller support.
4282 if (i
< MAX_CTLR_ORIG
)
4283 hba
[i
]->major
= COMPAQ_CISS_MAJOR
+ i
;
4284 rc
= register_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4285 if (rc
== -EBUSY
|| rc
== -EINVAL
) {
4287 "cciss: Unable to get major number %d for %s "
4288 "on hba %d\n", hba
[i
]->major
, hba
[i
]->devname
, i
);
4291 if (i
>= MAX_CTLR_ORIG
)
4295 /* make sure the board interrupts are off */
4296 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_OFF
);
4297 if (request_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], do_cciss_intr
,
4298 IRQF_DISABLED
| IRQF_SHARED
, hba
[i
]->devname
, hba
[i
])) {
4299 printk(KERN_ERR
"cciss: Unable to get irq %d for %s\n",
4300 hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]->devname
);
4304 printk(KERN_INFO
"%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
4305 hba
[i
]->devname
, pdev
->device
, pci_name(pdev
),
4306 hba
[i
]->intr
[SIMPLE_MODE_INT
], dac
? "" : " not");
4308 hba
[i
]->cmd_pool_bits
=
4309 kmalloc(DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4310 * sizeof(unsigned long), GFP_KERNEL
);
4311 hba
[i
]->cmd_pool
= (CommandList_struct
*)
4312 pci_alloc_consistent(hba
[i
]->pdev
,
4313 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4314 &(hba
[i
]->cmd_pool_dhandle
));
4315 hba
[i
]->errinfo_pool
= (ErrorInfo_struct
*)
4316 pci_alloc_consistent(hba
[i
]->pdev
,
4317 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4318 &(hba
[i
]->errinfo_pool_dhandle
));
4319 if ((hba
[i
]->cmd_pool_bits
== NULL
)
4320 || (hba
[i
]->cmd_pool
== NULL
)
4321 || (hba
[i
]->errinfo_pool
== NULL
)) {
4322 printk(KERN_ERR
"cciss: out of memory");
4325 spin_lock_init(&hba
[i
]->lock
);
4327 /* Initialize the pdev driver private data.
4328 have it point to hba[i]. */
4329 pci_set_drvdata(pdev
, hba
[i
]);
4330 /* command and error info recs zeroed out before
4332 memset(hba
[i
]->cmd_pool_bits
, 0,
4333 DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4334 * sizeof(unsigned long));
4336 hba
[i
]->num_luns
= 0;
4337 hba
[i
]->highest_lun
= -1;
4338 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4339 hba
[i
]->drv
[j
] = NULL
;
4340 hba
[i
]->gendisk
[j
] = NULL
;
4343 cciss_scsi_setup(i
);
4345 /* Turn the interrupts on so we can service requests */
4346 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_ON
);
4348 /* Get the firmware version */
4349 inq_buff
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
4350 if (inq_buff
== NULL
) {
4351 printk(KERN_ERR
"cciss: out of memory\n");
4355 return_code
= sendcmd_withirq(CISS_INQUIRY
, i
, inq_buff
,
4356 sizeof(InquiryData_struct
), 0, CTLR_LUNID
, TYPE_CMD
);
4357 if (return_code
== IO_OK
) {
4358 hba
[i
]->firm_ver
[0] = inq_buff
->data_byte
[32];
4359 hba
[i
]->firm_ver
[1] = inq_buff
->data_byte
[33];
4360 hba
[i
]->firm_ver
[2] = inq_buff
->data_byte
[34];
4361 hba
[i
]->firm_ver
[3] = inq_buff
->data_byte
[35];
4362 } else { /* send command failed */
4363 printk(KERN_WARNING
"cciss: unable to determine firmware"
4364 " version of controller\n");
4370 hba
[i
]->cciss_max_sectors
= 2048;
4372 rebuild_lun_table(hba
[i
], 1, 0);
4373 hba
[i
]->busy_initializing
= 0;
4377 kfree(hba
[i
]->cmd_pool_bits
);
4378 if (hba
[i
]->cmd_pool
)
4379 pci_free_consistent(hba
[i
]->pdev
,
4380 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4381 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4382 if (hba
[i
]->errinfo_pool
)
4383 pci_free_consistent(hba
[i
]->pdev
,
4384 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4385 hba
[i
]->errinfo_pool
,
4386 hba
[i
]->errinfo_pool_dhandle
);
4387 free_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]);
4389 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4391 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4393 hba
[i
]->busy_initializing
= 0;
4396 * Deliberately omit pci_disable_device(): it does something nasty to
4397 * Smart Array controllers that pci_enable_device does not undo
4399 pci_release_regions(pdev
);
4400 pci_set_drvdata(pdev
, NULL
);
4405 static void cciss_shutdown(struct pci_dev
*pdev
)
4407 ctlr_info_t
*tmp_ptr
;
4412 tmp_ptr
= pci_get_drvdata(pdev
);
4413 if (tmp_ptr
== NULL
)
4419 /* Turn board interrupts off and send the flush cache command */
4420 /* sendcmd will turn off interrupt, and send the flush...
4421 * To write all data in the battery backed cache to disks */
4422 memset(flush_buf
, 0, 4);
4423 return_code
= sendcmd(CCISS_CACHE_FLUSH
, i
, flush_buf
, 4, 0,
4424 CTLR_LUNID
, TYPE_CMD
);
4425 if (return_code
== IO_OK
) {
4426 printk(KERN_INFO
"Completed flushing cache on controller %d\n", i
);
4428 printk(KERN_WARNING
"Error flushing cache on controller %d\n", i
);
4430 free_irq(hba
[i
]->intr
[2], hba
[i
]);
4433 static void __devexit
cciss_remove_one(struct pci_dev
*pdev
)
4435 ctlr_info_t
*tmp_ptr
;
4438 if (pci_get_drvdata(pdev
) == NULL
) {
4439 printk(KERN_ERR
"cciss: Unable to remove device \n");
4443 tmp_ptr
= pci_get_drvdata(pdev
);
4445 if (hba
[i
] == NULL
) {
4446 printk(KERN_ERR
"cciss: device appears to "
4447 "already be removed \n");
4451 mutex_lock(&hba
[i
]->busy_shutting_down
);
4453 remove_from_scan_list(hba
[i
]);
4454 remove_proc_entry(hba
[i
]->devname
, proc_cciss
);
4455 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4457 /* remove it from the disk list */
4458 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4459 struct gendisk
*disk
= hba
[i
]->gendisk
[j
];
4461 struct request_queue
*q
= disk
->queue
;
4463 if (disk
->flags
& GENHD_FL_UP
) {
4464 cciss_destroy_ld_sysfs_entry(hba
[i
], j
, 1);
4468 blk_cleanup_queue(q
);
4472 #ifdef CONFIG_CISS_SCSI_TAPE
4473 cciss_unregister_scsi(i
); /* unhook from SCSI subsystem */
4476 cciss_shutdown(pdev
);
4478 #ifdef CONFIG_PCI_MSI
4479 if (hba
[i
]->msix_vector
)
4480 pci_disable_msix(hba
[i
]->pdev
);
4481 else if (hba
[i
]->msi_vector
)
4482 pci_disable_msi(hba
[i
]->pdev
);
4483 #endif /* CONFIG_PCI_MSI */
4485 iounmap(hba
[i
]->vaddr
);
4487 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4488 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4489 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4490 hba
[i
]->errinfo_pool
, hba
[i
]->errinfo_pool_dhandle
);
4491 kfree(hba
[i
]->cmd_pool_bits
);
4493 * Deliberately omit pci_disable_device(): it does something nasty to
4494 * Smart Array controllers that pci_enable_device does not undo
4496 pci_release_regions(pdev
);
4497 pci_set_drvdata(pdev
, NULL
);
4498 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4499 mutex_unlock(&hba
[i
]->busy_shutting_down
);
4503 static struct pci_driver cciss_pci_driver
= {
4505 .probe
= cciss_init_one
,
4506 .remove
= __devexit_p(cciss_remove_one
),
4507 .id_table
= cciss_pci_device_id
, /* id_table */
4508 .shutdown
= cciss_shutdown
,
4512 * This is it. Register the PCI driver information for the cards we control
4513 * the OS will call our registered routines when it finds one of our cards.
4515 static int __init
cciss_init(void)
4520 * The hardware requires that commands are aligned on a 64-bit
4521 * boundary. Given that we use pci_alloc_consistent() to allocate an
4522 * array of them, the size must be a multiple of 8 bytes.
4524 BUILD_BUG_ON(sizeof(CommandList_struct
) % 8);
4526 printk(KERN_INFO DRIVER_NAME
"\n");
4528 err
= bus_register(&cciss_bus_type
);
4532 /* Start the scan thread */
4533 cciss_scan_thread
= kthread_run(scan_thread
, NULL
, "cciss_scan");
4534 if (IS_ERR(cciss_scan_thread
)) {
4535 err
= PTR_ERR(cciss_scan_thread
);
4536 goto err_bus_unregister
;
4539 /* Register for our PCI devices */
4540 err
= pci_register_driver(&cciss_pci_driver
);
4542 goto err_thread_stop
;
4547 kthread_stop(cciss_scan_thread
);
4549 bus_unregister(&cciss_bus_type
);
4554 static void __exit
cciss_cleanup(void)
4558 pci_unregister_driver(&cciss_pci_driver
);
4559 /* double check that all controller entrys have been removed */
4560 for (i
= 0; i
< MAX_CTLR
; i
++) {
4561 if (hba
[i
] != NULL
) {
4562 printk(KERN_WARNING
"cciss: had to remove"
4563 " controller %d\n", i
);
4564 cciss_remove_one(hba
[i
]->pdev
);
4567 kthread_stop(cciss_scan_thread
);
4568 remove_proc_entry("driver/cciss", NULL
);
4569 bus_unregister(&cciss_bus_type
);
4572 static void fail_all_cmds(unsigned long ctlr
)
4574 /* If we get here, the board is apparently dead. */
4575 ctlr_info_t
*h
= hba
[ctlr
];
4576 CommandList_struct
*c
;
4577 unsigned long flags
;
4579 printk(KERN_WARNING
"cciss%d: controller not responding.\n", h
->ctlr
);
4580 h
->alive
= 0; /* the controller apparently died... */
4582 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
4584 pci_disable_device(h
->pdev
); /* Make sure it is really dead. */
4586 /* move everything off the request queue onto the completed queue */
4587 while (!hlist_empty(&h
->reqQ
)) {
4588 c
= hlist_entry(h
->reqQ
.first
, CommandList_struct
, list
);
4594 /* Now, fail everything on the completed queue with a HW error */
4595 while (!hlist_empty(&h
->cmpQ
)) {
4596 c
= hlist_entry(h
->cmpQ
.first
, CommandList_struct
, list
);
4598 if (c
->cmd_type
!= CMD_MSG_STALE
)
4599 c
->err_info
->CommandStatus
= CMD_HARDWARE_ERR
;
4600 if (c
->cmd_type
== CMD_RWREQ
) {
4601 complete_command(h
, c
, 0);
4602 } else if (c
->cmd_type
== CMD_IOCTL_PEND
)
4603 complete(c
->waiting
);
4604 #ifdef CONFIG_CISS_SCSI_TAPE
4605 else if (c
->cmd_type
== CMD_SCSI
)
4606 complete_scsi_command(c
, 0, 0);
4609 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
4613 module_init(cciss_init
);
4614 module_exit(cciss_cleanup
);