2 * Disk Array driver for HP Smart Array controllers.
3 * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
23 #include <linux/module.h>
24 #include <linux/interrupt.h>
25 #include <linux/types.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/smp_lock.h>
30 #include <linux/delay.h>
31 #include <linux/major.h>
33 #include <linux/bio.h>
34 #include <linux/blkpg.h>
35 #include <linux/timer.h>
36 #include <linux/proc_fs.h>
37 #include <linux/seq_file.h>
38 #include <linux/init.h>
39 #include <linux/jiffies.h>
40 #include <linux/hdreg.h>
41 #include <linux/spinlock.h>
42 #include <linux/compat.h>
43 #include <linux/mutex.h>
44 #include <asm/uaccess.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/blkdev.h>
49 #include <linux/genhd.h>
50 #include <linux/completion.h>
51 #include <scsi/scsi.h>
53 #include <scsi/scsi_ioctl.h>
54 #include <linux/cdrom.h>
55 #include <linux/scatterlist.h>
56 #include <linux/kthread.h>
58 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
59 #define DRIVER_NAME "HP CISS Driver (v 3.6.26)"
60 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26)
62 /* Embedded module documentation macros - see modules.h */
63 MODULE_AUTHOR("Hewlett-Packard Company");
64 MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
65 MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
66 MODULE_VERSION("3.6.26");
67 MODULE_LICENSE("GPL");
69 static int cciss_allow_hpsa
;
70 module_param(cciss_allow_hpsa
, int, S_IRUGO
|S_IWUSR
);
71 MODULE_PARM_DESC(cciss_allow_hpsa
,
72 "Prevent cciss driver from accessing hardware known to be "
73 " supported by the hpsa driver");
75 #include "cciss_cmd.h"
77 #include <linux/cciss_ioctl.h>
79 /* define the PCI info for the cards we can control */
80 static const struct pci_device_id cciss_pci_device_id
[] = {
81 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISS
, 0x0E11, 0x4070},
82 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4080},
83 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4082},
84 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4083},
85 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x4091},
86 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409A},
87 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409B},
88 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409C},
89 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409D},
90 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSA
, 0x103C, 0x3225},
91 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3223},
92 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3234},
93 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3235},
94 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3211},
95 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3212},
96 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3213},
97 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3214},
98 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3215},
99 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3237},
100 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x323D},
101 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3241},
102 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3243},
103 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3245},
104 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3247},
105 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3249},
106 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324A},
107 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324B},
108 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3250},
109 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3251},
110 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3252},
111 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3253},
112 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3254},
116 MODULE_DEVICE_TABLE(pci
, cciss_pci_device_id
);
118 /* board_id = Subsystem Device ID & Vendor ID
119 * product = Marketing Name for the board
120 * access = Address of the struct of function pointers
122 static struct board_type products
[] = {
123 {0x40700E11, "Smart Array 5300", &SA5_access
},
124 {0x40800E11, "Smart Array 5i", &SA5B_access
},
125 {0x40820E11, "Smart Array 532", &SA5B_access
},
126 {0x40830E11, "Smart Array 5312", &SA5B_access
},
127 {0x409A0E11, "Smart Array 641", &SA5_access
},
128 {0x409B0E11, "Smart Array 642", &SA5_access
},
129 {0x409C0E11, "Smart Array 6400", &SA5_access
},
130 {0x409D0E11, "Smart Array 6400 EM", &SA5_access
},
131 {0x40910E11, "Smart Array 6i", &SA5_access
},
132 {0x3225103C, "Smart Array P600", &SA5_access
},
133 {0x3235103C, "Smart Array P400i", &SA5_access
},
134 {0x3211103C, "Smart Array E200i", &SA5_access
},
135 {0x3212103C, "Smart Array E200", &SA5_access
},
136 {0x3213103C, "Smart Array E200i", &SA5_access
},
137 {0x3214103C, "Smart Array E200i", &SA5_access
},
138 {0x3215103C, "Smart Array E200i", &SA5_access
},
139 {0x3237103C, "Smart Array E500", &SA5_access
},
140 /* controllers below this line are also supported by the hpsa driver. */
141 #define HPSA_BOUNDARY 0x3223103C
142 {0x3223103C, "Smart Array P800", &SA5_access
},
143 {0x3234103C, "Smart Array P400", &SA5_access
},
144 {0x323D103C, "Smart Array P700m", &SA5_access
},
145 {0x3241103C, "Smart Array P212", &SA5_access
},
146 {0x3243103C, "Smart Array P410", &SA5_access
},
147 {0x3245103C, "Smart Array P410i", &SA5_access
},
148 {0x3247103C, "Smart Array P411", &SA5_access
},
149 {0x3249103C, "Smart Array P812", &SA5_access
},
150 {0x324A103C, "Smart Array P712m", &SA5_access
},
151 {0x324B103C, "Smart Array P711m", &SA5_access
},
152 {0x3250103C, "Smart Array", &SA5_access
},
153 {0x3251103C, "Smart Array", &SA5_access
},
154 {0x3252103C, "Smart Array", &SA5_access
},
155 {0x3253103C, "Smart Array", &SA5_access
},
156 {0x3254103C, "Smart Array", &SA5_access
},
159 /* How long to wait (in milliseconds) for board to go into simple mode */
160 #define MAX_CONFIG_WAIT 30000
161 #define MAX_IOCTL_CONFIG_WAIT 1000
163 /*define how many times we will try a command because of bus resets */
164 #define MAX_CMD_RETRIES 3
168 /* Originally cciss driver only supports 8 major numbers */
169 #define MAX_CTLR_ORIG 8
171 static ctlr_info_t
*hba
[MAX_CTLR
];
173 static struct task_struct
*cciss_scan_thread
;
174 static DEFINE_MUTEX(scan_mutex
);
175 static LIST_HEAD(scan_q
);
177 static void do_cciss_request(struct request_queue
*q
);
178 static irqreturn_t
do_cciss_intx(int irq
, void *dev_id
);
179 static irqreturn_t
do_cciss_msix_intr(int irq
, void *dev_id
);
180 static int cciss_open(struct block_device
*bdev
, fmode_t mode
);
181 static int cciss_release(struct gendisk
*disk
, fmode_t mode
);
182 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
183 unsigned int cmd
, unsigned long arg
);
184 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
);
186 static int cciss_revalidate(struct gendisk
*disk
);
187 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
, int via_ioctl
);
188 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
189 int clear_all
, int via_ioctl
);
191 static void cciss_read_capacity(int ctlr
, int logvol
,
192 sector_t
*total_size
, unsigned int *block_size
);
193 static void cciss_read_capacity_16(int ctlr
, int logvol
,
194 sector_t
*total_size
, unsigned int *block_size
);
195 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
197 unsigned int block_size
, InquiryData_struct
*inq_buff
,
198 drive_info_struct
*drv
);
199 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*, struct pci_dev
*,
201 static void start_io(ctlr_info_t
*h
);
202 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
203 __u8 page_code
, unsigned char scsi3addr
[],
205 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
207 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
);
209 static int add_to_scan_list(struct ctlr_info
*h
);
210 static int scan_thread(void *data
);
211 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
);
212 static void cciss_hba_release(struct device
*dev
);
213 static void cciss_device_release(struct device
*dev
);
214 static void cciss_free_gendisk(ctlr_info_t
*h
, int drv_index
);
215 static void cciss_free_drive_info(ctlr_info_t
*h
, int drv_index
);
216 static inline u32
next_command(ctlr_info_t
*h
);
218 /* performant mode helper functions */
219 static void calc_bucket_map(int *bucket
, int num_buckets
, int nsgs
,
221 static void cciss_put_controller_into_performant_mode(ctlr_info_t
*h
);
223 #ifdef CONFIG_PROC_FS
224 static void cciss_procinit(int i
);
226 static void cciss_procinit(int i
)
229 #endif /* CONFIG_PROC_FS */
232 static int cciss_compat_ioctl(struct block_device
*, fmode_t
,
233 unsigned, unsigned long);
236 static const struct block_device_operations cciss_fops
= {
237 .owner
= THIS_MODULE
,
239 .release
= cciss_release
,
240 .locked_ioctl
= cciss_ioctl
,
241 .getgeo
= cciss_getgeo
,
243 .compat_ioctl
= cciss_compat_ioctl
,
245 .revalidate_disk
= cciss_revalidate
,
248 /* set_performant_mode: Modify the tag for cciss performant
249 * set bit 0 for pull model, bits 3-1 for block fetch
252 static void set_performant_mode(ctlr_info_t
*h
, CommandList_struct
*c
)
254 if (likely(h
->transMethod
== CFGTBL_Trans_Performant
))
255 c
->busaddr
|= 1 | (h
->blockFetchTable
[c
->Header
.SGList
] << 1);
259 * Enqueuing and dequeuing functions for cmdlists.
261 static inline void addQ(struct hlist_head
*list
, CommandList_struct
*c
)
263 hlist_add_head(&c
->list
, list
);
266 static inline void removeQ(CommandList_struct
*c
)
269 * After kexec/dump some commands might still
270 * be in flight, which the firmware will try
271 * to complete. Resetting the firmware doesn't work
272 * with old fw revisions, so we have to mark
273 * them off as 'stale' to prevent the driver from
276 if (WARN_ON(hlist_unhashed(&c
->list
))) {
277 c
->cmd_type
= CMD_MSG_STALE
;
281 hlist_del_init(&c
->list
);
284 static void enqueue_cmd_and_start_io(ctlr_info_t
*h
,
285 CommandList_struct
*c
)
288 set_performant_mode(h
, c
);
289 spin_lock_irqsave(&h
->lock
, flags
);
293 spin_unlock_irqrestore(&h
->lock
, flags
);
296 static void cciss_free_sg_chain_blocks(SGDescriptor_struct
**cmd_sg_list
,
303 for (i
= 0; i
< nr_cmds
; i
++) {
304 kfree(cmd_sg_list
[i
]);
305 cmd_sg_list
[i
] = NULL
;
310 static SGDescriptor_struct
**cciss_allocate_sg_chain_blocks(
311 ctlr_info_t
*h
, int chainsize
, int nr_cmds
)
314 SGDescriptor_struct
**cmd_sg_list
;
319 cmd_sg_list
= kmalloc(sizeof(*cmd_sg_list
) * nr_cmds
, GFP_KERNEL
);
323 /* Build up chain blocks for each command */
324 for (j
= 0; j
< nr_cmds
; j
++) {
325 /* Need a block of chainsized s/g elements. */
326 cmd_sg_list
[j
] = kmalloc((chainsize
*
327 sizeof(*cmd_sg_list
[j
])), GFP_KERNEL
);
328 if (!cmd_sg_list
[j
]) {
329 dev_err(&h
->pdev
->dev
, "Cannot get memory "
330 "for s/g chains.\n");
336 cciss_free_sg_chain_blocks(cmd_sg_list
, nr_cmds
);
340 static void cciss_unmap_sg_chain_block(ctlr_info_t
*h
, CommandList_struct
*c
)
342 SGDescriptor_struct
*chain_sg
;
345 if (c
->Header
.SGTotal
<= h
->max_cmd_sgentries
)
348 chain_sg
= &c
->SG
[h
->max_cmd_sgentries
- 1];
349 temp64
.val32
.lower
= chain_sg
->Addr
.lower
;
350 temp64
.val32
.upper
= chain_sg
->Addr
.upper
;
351 pci_unmap_single(h
->pdev
, temp64
.val
, chain_sg
->Len
, PCI_DMA_TODEVICE
);
354 static void cciss_map_sg_chain_block(ctlr_info_t
*h
, CommandList_struct
*c
,
355 SGDescriptor_struct
*chain_block
, int len
)
357 SGDescriptor_struct
*chain_sg
;
360 chain_sg
= &c
->SG
[h
->max_cmd_sgentries
- 1];
361 chain_sg
->Ext
= CCISS_SG_CHAIN
;
363 temp64
.val
= pci_map_single(h
->pdev
, chain_block
, len
,
365 chain_sg
->Addr
.lower
= temp64
.val32
.lower
;
366 chain_sg
->Addr
.upper
= temp64
.val32
.upper
;
369 #include "cciss_scsi.c" /* For SCSI tape support */
371 static const char *raid_label
[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
374 #define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
376 #ifdef CONFIG_PROC_FS
379 * Report information about this controller.
381 #define ENG_GIG 1000000000
382 #define ENG_GIG_FACTOR (ENG_GIG/512)
383 #define ENGAGE_SCSI "engage scsi"
385 static struct proc_dir_entry
*proc_cciss
;
387 static void cciss_seq_show_header(struct seq_file
*seq
)
389 ctlr_info_t
*h
= seq
->private;
391 seq_printf(seq
, "%s: HP %s Controller\n"
392 "Board ID: 0x%08lx\n"
393 "Firmware Version: %c%c%c%c\n"
395 "Logical drives: %d\n"
396 "Current Q depth: %d\n"
397 "Current # commands on controller: %d\n"
398 "Max Q depth since init: %d\n"
399 "Max # commands on controller since init: %d\n"
400 "Max SG entries since init: %d\n",
403 (unsigned long)h
->board_id
,
404 h
->firm_ver
[0], h
->firm_ver
[1], h
->firm_ver
[2],
405 h
->firm_ver
[3], (unsigned int)h
->intr
[PERF_MODE_INT
],
407 h
->Qdepth
, h
->commands_outstanding
,
408 h
->maxQsinceinit
, h
->max_outstanding
, h
->maxSG
);
410 #ifdef CONFIG_CISS_SCSI_TAPE
411 cciss_seq_tape_report(seq
, h
->ctlr
);
412 #endif /* CONFIG_CISS_SCSI_TAPE */
415 static void *cciss_seq_start(struct seq_file
*seq
, loff_t
*pos
)
417 ctlr_info_t
*h
= seq
->private;
418 unsigned ctlr
= h
->ctlr
;
421 /* prevent displaying bogus info during configuration
422 * or deconfiguration of a logical volume
424 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
425 if (h
->busy_configuring
) {
426 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
427 return ERR_PTR(-EBUSY
);
429 h
->busy_configuring
= 1;
430 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
433 cciss_seq_show_header(seq
);
438 static int cciss_seq_show(struct seq_file
*seq
, void *v
)
440 sector_t vol_sz
, vol_sz_frac
;
441 ctlr_info_t
*h
= seq
->private;
442 unsigned ctlr
= h
->ctlr
;
444 drive_info_struct
*drv
= h
->drv
[*pos
];
446 if (*pos
> h
->highest_lun
)
449 if (drv
== NULL
) /* it's possible for h->drv[] to have holes. */
455 vol_sz
= drv
->nr_blocks
;
456 vol_sz_frac
= sector_div(vol_sz
, ENG_GIG_FACTOR
);
458 sector_div(vol_sz_frac
, ENG_GIG_FACTOR
);
460 if (drv
->raid_level
< 0 || drv
->raid_level
> RAID_UNKNOWN
)
461 drv
->raid_level
= RAID_UNKNOWN
;
462 seq_printf(seq
, "cciss/c%dd%d:"
463 "\t%4u.%02uGB\tRAID %s\n",
464 ctlr
, (int) *pos
, (int)vol_sz
, (int)vol_sz_frac
,
465 raid_label
[drv
->raid_level
]);
469 static void *cciss_seq_next(struct seq_file
*seq
, void *v
, loff_t
*pos
)
471 ctlr_info_t
*h
= seq
->private;
473 if (*pos
> h
->highest_lun
)
480 static void cciss_seq_stop(struct seq_file
*seq
, void *v
)
482 ctlr_info_t
*h
= seq
->private;
484 /* Only reset h->busy_configuring if we succeeded in setting
485 * it during cciss_seq_start. */
486 if (v
== ERR_PTR(-EBUSY
))
489 h
->busy_configuring
= 0;
492 static const struct seq_operations cciss_seq_ops
= {
493 .start
= cciss_seq_start
,
494 .show
= cciss_seq_show
,
495 .next
= cciss_seq_next
,
496 .stop
= cciss_seq_stop
,
499 static int cciss_seq_open(struct inode
*inode
, struct file
*file
)
501 int ret
= seq_open(file
, &cciss_seq_ops
);
502 struct seq_file
*seq
= file
->private_data
;
505 seq
->private = PDE(inode
)->data
;
511 cciss_proc_write(struct file
*file
, const char __user
*buf
,
512 size_t length
, loff_t
*ppos
)
517 #ifndef CONFIG_CISS_SCSI_TAPE
521 if (!buf
|| length
> PAGE_SIZE
- 1)
524 buffer
= (char *)__get_free_page(GFP_KERNEL
);
529 if (copy_from_user(buffer
, buf
, length
))
531 buffer
[length
] = '\0';
533 #ifdef CONFIG_CISS_SCSI_TAPE
534 if (strncmp(ENGAGE_SCSI
, buffer
, sizeof ENGAGE_SCSI
- 1) == 0) {
535 struct seq_file
*seq
= file
->private_data
;
536 ctlr_info_t
*h
= seq
->private;
538 err
= cciss_engage_scsi(h
->ctlr
);
542 #endif /* CONFIG_CISS_SCSI_TAPE */
544 /* might be nice to have "disengage" too, but it's not
545 safely possible. (only 1 module use count, lock issues.) */
548 free_page((unsigned long)buffer
);
552 static const struct file_operations cciss_proc_fops
= {
553 .owner
= THIS_MODULE
,
554 .open
= cciss_seq_open
,
557 .release
= seq_release
,
558 .write
= cciss_proc_write
,
561 static void __devinit
cciss_procinit(int i
)
563 struct proc_dir_entry
*pde
;
565 if (proc_cciss
== NULL
)
566 proc_cciss
= proc_mkdir("driver/cciss", NULL
);
569 pde
= proc_create_data(hba
[i
]->devname
, S_IWUSR
| S_IRUSR
| S_IRGRP
|
571 &cciss_proc_fops
, hba
[i
]);
573 #endif /* CONFIG_PROC_FS */
575 #define MAX_PRODUCT_NAME_LEN 19
577 #define to_hba(n) container_of(n, struct ctlr_info, dev)
578 #define to_drv(n) container_of(n, drive_info_struct, dev)
580 static ssize_t
host_store_rescan(struct device
*dev
,
581 struct device_attribute
*attr
,
582 const char *buf
, size_t count
)
584 struct ctlr_info
*h
= to_hba(dev
);
587 wake_up_process(cciss_scan_thread
);
588 wait_for_completion_interruptible(&h
->scan_wait
);
592 static DEVICE_ATTR(rescan
, S_IWUSR
, NULL
, host_store_rescan
);
594 static ssize_t
dev_show_unique_id(struct device
*dev
,
595 struct device_attribute
*attr
,
598 drive_info_struct
*drv
= to_drv(dev
);
599 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
604 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
605 if (h
->busy_configuring
)
608 memcpy(sn
, drv
->serial_no
, sizeof(sn
));
609 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
614 return snprintf(buf
, 16 * 2 + 2,
615 "%02X%02X%02X%02X%02X%02X%02X%02X"
616 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
617 sn
[0], sn
[1], sn
[2], sn
[3],
618 sn
[4], sn
[5], sn
[6], sn
[7],
619 sn
[8], sn
[9], sn
[10], sn
[11],
620 sn
[12], sn
[13], sn
[14], sn
[15]);
622 static DEVICE_ATTR(unique_id
, S_IRUGO
, dev_show_unique_id
, NULL
);
624 static ssize_t
dev_show_vendor(struct device
*dev
,
625 struct device_attribute
*attr
,
628 drive_info_struct
*drv
= to_drv(dev
);
629 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
630 char vendor
[VENDOR_LEN
+ 1];
634 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
635 if (h
->busy_configuring
)
638 memcpy(vendor
, drv
->vendor
, VENDOR_LEN
+ 1);
639 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
644 return snprintf(buf
, sizeof(vendor
) + 1, "%s\n", drv
->vendor
);
646 static DEVICE_ATTR(vendor
, S_IRUGO
, dev_show_vendor
, NULL
);
648 static ssize_t
dev_show_model(struct device
*dev
,
649 struct device_attribute
*attr
,
652 drive_info_struct
*drv
= to_drv(dev
);
653 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
654 char model
[MODEL_LEN
+ 1];
658 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
659 if (h
->busy_configuring
)
662 memcpy(model
, drv
->model
, MODEL_LEN
+ 1);
663 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
668 return snprintf(buf
, sizeof(model
) + 1, "%s\n", drv
->model
);
670 static DEVICE_ATTR(model
, S_IRUGO
, dev_show_model
, NULL
);
672 static ssize_t
dev_show_rev(struct device
*dev
,
673 struct device_attribute
*attr
,
676 drive_info_struct
*drv
= to_drv(dev
);
677 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
678 char rev
[REV_LEN
+ 1];
682 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
683 if (h
->busy_configuring
)
686 memcpy(rev
, drv
->rev
, REV_LEN
+ 1);
687 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
692 return snprintf(buf
, sizeof(rev
) + 1, "%s\n", drv
->rev
);
694 static DEVICE_ATTR(rev
, S_IRUGO
, dev_show_rev
, NULL
);
696 static ssize_t
cciss_show_lunid(struct device
*dev
,
697 struct device_attribute
*attr
, char *buf
)
699 drive_info_struct
*drv
= to_drv(dev
);
700 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
702 unsigned char lunid
[8];
704 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
705 if (h
->busy_configuring
) {
706 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
710 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
713 memcpy(lunid
, drv
->LunID
, sizeof(lunid
));
714 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
715 return snprintf(buf
, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
716 lunid
[0], lunid
[1], lunid
[2], lunid
[3],
717 lunid
[4], lunid
[5], lunid
[6], lunid
[7]);
719 static DEVICE_ATTR(lunid
, S_IRUGO
, cciss_show_lunid
, NULL
);
721 static ssize_t
cciss_show_raid_level(struct device
*dev
,
722 struct device_attribute
*attr
, char *buf
)
724 drive_info_struct
*drv
= to_drv(dev
);
725 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
729 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
730 if (h
->busy_configuring
) {
731 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
734 raid
= drv
->raid_level
;
735 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
736 if (raid
< 0 || raid
> RAID_UNKNOWN
)
739 return snprintf(buf
, strlen(raid_label
[raid
]) + 7, "RAID %s\n",
742 static DEVICE_ATTR(raid_level
, S_IRUGO
, cciss_show_raid_level
, NULL
);
744 static ssize_t
cciss_show_usage_count(struct device
*dev
,
745 struct device_attribute
*attr
, char *buf
)
747 drive_info_struct
*drv
= to_drv(dev
);
748 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
752 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
753 if (h
->busy_configuring
) {
754 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
757 count
= drv
->usage_count
;
758 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
759 return snprintf(buf
, 20, "%d\n", count
);
761 static DEVICE_ATTR(usage_count
, S_IRUGO
, cciss_show_usage_count
, NULL
);
763 static struct attribute
*cciss_host_attrs
[] = {
764 &dev_attr_rescan
.attr
,
768 static struct attribute_group cciss_host_attr_group
= {
769 .attrs
= cciss_host_attrs
,
772 static const struct attribute_group
*cciss_host_attr_groups
[] = {
773 &cciss_host_attr_group
,
777 static struct device_type cciss_host_type
= {
778 .name
= "cciss_host",
779 .groups
= cciss_host_attr_groups
,
780 .release
= cciss_hba_release
,
783 static struct attribute
*cciss_dev_attrs
[] = {
784 &dev_attr_unique_id
.attr
,
785 &dev_attr_model
.attr
,
786 &dev_attr_vendor
.attr
,
788 &dev_attr_lunid
.attr
,
789 &dev_attr_raid_level
.attr
,
790 &dev_attr_usage_count
.attr
,
794 static struct attribute_group cciss_dev_attr_group
= {
795 .attrs
= cciss_dev_attrs
,
798 static const struct attribute_group
*cciss_dev_attr_groups
[] = {
799 &cciss_dev_attr_group
,
803 static struct device_type cciss_dev_type
= {
804 .name
= "cciss_device",
805 .groups
= cciss_dev_attr_groups
,
806 .release
= cciss_device_release
,
809 static struct bus_type cciss_bus_type
= {
814 * cciss_hba_release is called when the reference count
815 * of h->dev goes to zero.
817 static void cciss_hba_release(struct device
*dev
)
820 * nothing to do, but need this to avoid a warning
821 * about not having a release handler from lib/kref.c.
826 * Initialize sysfs entry for each controller. This sets up and registers
827 * the 'cciss#' directory for each individual controller under
828 * /sys/bus/pci/devices/<dev>/.
830 static int cciss_create_hba_sysfs_entry(struct ctlr_info
*h
)
832 device_initialize(&h
->dev
);
833 h
->dev
.type
= &cciss_host_type
;
834 h
->dev
.bus
= &cciss_bus_type
;
835 dev_set_name(&h
->dev
, "%s", h
->devname
);
836 h
->dev
.parent
= &h
->pdev
->dev
;
838 return device_add(&h
->dev
);
842 * Remove sysfs entries for an hba.
844 static void cciss_destroy_hba_sysfs_entry(struct ctlr_info
*h
)
847 put_device(&h
->dev
); /* final put. */
850 /* cciss_device_release is called when the reference count
851 * of h->drv[x]dev goes to zero.
853 static void cciss_device_release(struct device
*dev
)
855 drive_info_struct
*drv
= to_drv(dev
);
860 * Initialize sysfs for each logical drive. This sets up and registers
861 * the 'c#d#' directory for each individual logical drive under
862 * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
863 * /sys/block/cciss!c#d# to this entry.
865 static long cciss_create_ld_sysfs_entry(struct ctlr_info
*h
,
870 if (h
->drv
[drv_index
]->device_initialized
)
873 dev
= &h
->drv
[drv_index
]->dev
;
874 device_initialize(dev
);
875 dev
->type
= &cciss_dev_type
;
876 dev
->bus
= &cciss_bus_type
;
877 dev_set_name(dev
, "c%dd%d", h
->ctlr
, drv_index
);
878 dev
->parent
= &h
->dev
;
879 h
->drv
[drv_index
]->device_initialized
= 1;
880 return device_add(dev
);
884 * Remove sysfs entries for a logical drive.
886 static void cciss_destroy_ld_sysfs_entry(struct ctlr_info
*h
, int drv_index
,
889 struct device
*dev
= &h
->drv
[drv_index
]->dev
;
891 /* special case for c*d0, we only destroy it on controller exit */
892 if (drv_index
== 0 && !ctlr_exiting
)
896 put_device(dev
); /* the "final" put. */
897 h
->drv
[drv_index
] = NULL
;
901 * For operations that cannot sleep, a command block is allocated at init,
902 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
903 * which ones are free or in use. For operations that can wait for kmalloc
904 * to possible sleep, this routine can be called with get_from_pool set to 0.
905 * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
907 static CommandList_struct
*cmd_alloc(ctlr_info_t
*h
, int get_from_pool
)
909 CommandList_struct
*c
;
912 dma_addr_t cmd_dma_handle
, err_dma_handle
;
914 if (!get_from_pool
) {
915 c
= (CommandList_struct
*) pci_alloc_consistent(h
->pdev
,
916 sizeof(CommandList_struct
), &cmd_dma_handle
);
919 memset(c
, 0, sizeof(CommandList_struct
));
923 c
->err_info
= (ErrorInfo_struct
*)
924 pci_alloc_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
927 if (c
->err_info
== NULL
) {
928 pci_free_consistent(h
->pdev
,
929 sizeof(CommandList_struct
), c
, cmd_dma_handle
);
932 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
933 } else { /* get it out of the controllers pool */
936 i
= find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
);
939 } while (test_and_set_bit
940 (i
& (BITS_PER_LONG
- 1),
941 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
)) != 0);
943 printk(KERN_DEBUG
"cciss: using command buffer %d\n", i
);
946 memset(c
, 0, sizeof(CommandList_struct
));
947 cmd_dma_handle
= h
->cmd_pool_dhandle
948 + i
* sizeof(CommandList_struct
);
949 c
->err_info
= h
->errinfo_pool
+ i
;
950 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
951 err_dma_handle
= h
->errinfo_pool_dhandle
952 + i
* sizeof(ErrorInfo_struct
);
958 INIT_HLIST_NODE(&c
->list
);
959 c
->busaddr
= (__u32
) cmd_dma_handle
;
960 temp64
.val
= (__u64
) err_dma_handle
;
961 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
962 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
963 c
->ErrDesc
.Len
= sizeof(ErrorInfo_struct
);
970 * Frees a command block that was previously allocated with cmd_alloc().
972 static void cmd_free(ctlr_info_t
*h
, CommandList_struct
*c
, int got_from_pool
)
977 if (!got_from_pool
) {
978 temp64
.val32
.lower
= c
->ErrDesc
.Addr
.lower
;
979 temp64
.val32
.upper
= c
->ErrDesc
.Addr
.upper
;
980 pci_free_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
981 c
->err_info
, (dma_addr_t
) temp64
.val
);
982 pci_free_consistent(h
->pdev
, sizeof(CommandList_struct
),
983 c
, (dma_addr_t
) c
->busaddr
);
986 clear_bit(i
& (BITS_PER_LONG
- 1),
987 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
));
992 static inline ctlr_info_t
*get_host(struct gendisk
*disk
)
994 return disk
->queue
->queuedata
;
997 static inline drive_info_struct
*get_drv(struct gendisk
*disk
)
999 return disk
->private_data
;
1003 * Open. Make sure the device is really there.
1005 static int cciss_open(struct block_device
*bdev
, fmode_t mode
)
1007 ctlr_info_t
*host
= get_host(bdev
->bd_disk
);
1008 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
1011 printk(KERN_DEBUG
"cciss_open %s\n", bdev
->bd_disk
->disk_name
);
1012 #endif /* CCISS_DEBUG */
1014 if (drv
->busy_configuring
)
1017 * Root is allowed to open raw volume zero even if it's not configured
1018 * so array config can still work. Root is also allowed to open any
1019 * volume that has a LUN ID, so it can issue IOCTL to reread the
1020 * disk information. I don't think I really like this
1021 * but I'm already using way to many device nodes to claim another one
1022 * for "raw controller".
1024 if (drv
->heads
== 0) {
1025 if (MINOR(bdev
->bd_dev
) != 0) { /* not node 0? */
1026 /* if not node 0 make sure it is a partition = 0 */
1027 if (MINOR(bdev
->bd_dev
) & 0x0f) {
1029 /* if it is, make sure we have a LUN ID */
1030 } else if (memcmp(drv
->LunID
, CTLR_LUNID
,
1031 sizeof(drv
->LunID
))) {
1035 if (!capable(CAP_SYS_ADMIN
))
1039 host
->usage_count
++;
1044 * Close. Sync first.
1046 static int cciss_release(struct gendisk
*disk
, fmode_t mode
)
1048 ctlr_info_t
*host
= get_host(disk
);
1049 drive_info_struct
*drv
= get_drv(disk
);
1052 printk(KERN_DEBUG
"cciss_release %s\n", disk
->disk_name
);
1053 #endif /* CCISS_DEBUG */
1056 host
->usage_count
--;
1060 #ifdef CONFIG_COMPAT
1062 static int do_ioctl(struct block_device
*bdev
, fmode_t mode
,
1063 unsigned cmd
, unsigned long arg
)
1067 ret
= cciss_ioctl(bdev
, mode
, cmd
, arg
);
1072 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
1073 unsigned cmd
, unsigned long arg
);
1074 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
1075 unsigned cmd
, unsigned long arg
);
1077 static int cciss_compat_ioctl(struct block_device
*bdev
, fmode_t mode
,
1078 unsigned cmd
, unsigned long arg
)
1081 case CCISS_GETPCIINFO
:
1082 case CCISS_GETINTINFO
:
1083 case CCISS_SETINTINFO
:
1084 case CCISS_GETNODENAME
:
1085 case CCISS_SETNODENAME
:
1086 case CCISS_GETHEARTBEAT
:
1087 case CCISS_GETBUSTYPES
:
1088 case CCISS_GETFIRMVER
:
1089 case CCISS_GETDRIVVER
:
1090 case CCISS_REVALIDVOLS
:
1091 case CCISS_DEREGDISK
:
1092 case CCISS_REGNEWDISK
:
1094 case CCISS_RESCANDISK
:
1095 case CCISS_GETLUNINFO
:
1096 return do_ioctl(bdev
, mode
, cmd
, arg
);
1098 case CCISS_PASSTHRU32
:
1099 return cciss_ioctl32_passthru(bdev
, mode
, cmd
, arg
);
1100 case CCISS_BIG_PASSTHRU32
:
1101 return cciss_ioctl32_big_passthru(bdev
, mode
, cmd
, arg
);
1104 return -ENOIOCTLCMD
;
1108 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
1109 unsigned cmd
, unsigned long arg
)
1111 IOCTL32_Command_struct __user
*arg32
=
1112 (IOCTL32_Command_struct __user
*) arg
;
1113 IOCTL_Command_struct arg64
;
1114 IOCTL_Command_struct __user
*p
= compat_alloc_user_space(sizeof(arg64
));
1120 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
1121 sizeof(arg64
.LUN_info
));
1123 copy_from_user(&arg64
.Request
, &arg32
->Request
,
1124 sizeof(arg64
.Request
));
1126 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
1127 sizeof(arg64
.error_info
));
1128 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
1129 err
|= get_user(cp
, &arg32
->buf
);
1130 arg64
.buf
= compat_ptr(cp
);
1131 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
1136 err
= do_ioctl(bdev
, mode
, CCISS_PASSTHRU
, (unsigned long)p
);
1140 copy_in_user(&arg32
->error_info
, &p
->error_info
,
1141 sizeof(arg32
->error_info
));
1147 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
1148 unsigned cmd
, unsigned long arg
)
1150 BIG_IOCTL32_Command_struct __user
*arg32
=
1151 (BIG_IOCTL32_Command_struct __user
*) arg
;
1152 BIG_IOCTL_Command_struct arg64
;
1153 BIG_IOCTL_Command_struct __user
*p
=
1154 compat_alloc_user_space(sizeof(arg64
));
1160 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
1161 sizeof(arg64
.LUN_info
));
1163 copy_from_user(&arg64
.Request
, &arg32
->Request
,
1164 sizeof(arg64
.Request
));
1166 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
1167 sizeof(arg64
.error_info
));
1168 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
1169 err
|= get_user(arg64
.malloc_size
, &arg32
->malloc_size
);
1170 err
|= get_user(cp
, &arg32
->buf
);
1171 arg64
.buf
= compat_ptr(cp
);
1172 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
1177 err
= do_ioctl(bdev
, mode
, CCISS_BIG_PASSTHRU
, (unsigned long)p
);
1181 copy_in_user(&arg32
->error_info
, &p
->error_info
,
1182 sizeof(arg32
->error_info
));
1189 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
1191 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
1193 if (!drv
->cylinders
)
1196 geo
->heads
= drv
->heads
;
1197 geo
->sectors
= drv
->sectors
;
1198 geo
->cylinders
= drv
->cylinders
;
1202 static void check_ioctl_unit_attention(ctlr_info_t
*host
, CommandList_struct
*c
)
1204 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
&&
1205 c
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
)
1206 (void)check_for_unit_attention(host
, c
);
1211 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
1212 unsigned int cmd
, unsigned long arg
)
1214 struct gendisk
*disk
= bdev
->bd_disk
;
1215 ctlr_info_t
*host
= get_host(disk
);
1216 drive_info_struct
*drv
= get_drv(disk
);
1217 int ctlr
= host
->ctlr
;
1218 void __user
*argp
= (void __user
*)arg
;
1221 printk(KERN_DEBUG
"cciss_ioctl: Called with cmd=%x %lx\n", cmd
, arg
);
1222 #endif /* CCISS_DEBUG */
1225 case CCISS_GETPCIINFO
:
1227 cciss_pci_info_struct pciinfo
;
1231 pciinfo
.domain
= pci_domain_nr(host
->pdev
->bus
);
1232 pciinfo
.bus
= host
->pdev
->bus
->number
;
1233 pciinfo
.dev_fn
= host
->pdev
->devfn
;
1234 pciinfo
.board_id
= host
->board_id
;
1236 (argp
, &pciinfo
, sizeof(cciss_pci_info_struct
)))
1240 case CCISS_GETINTINFO
:
1242 cciss_coalint_struct intinfo
;
1246 readl(&host
->cfgtable
->HostWrite
.CoalIntDelay
);
1248 readl(&host
->cfgtable
->HostWrite
.CoalIntCount
);
1250 (argp
, &intinfo
, sizeof(cciss_coalint_struct
)))
1254 case CCISS_SETINTINFO
:
1256 cciss_coalint_struct intinfo
;
1257 unsigned long flags
;
1262 if (!capable(CAP_SYS_ADMIN
))
1265 (&intinfo
, argp
, sizeof(cciss_coalint_struct
)))
1267 if ((intinfo
.delay
== 0) && (intinfo
.count
== 0))
1269 // printk("cciss_ioctl: delay and count cannot be 0\n");
1272 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1273 /* Update the field, and then ring the doorbell */
1274 writel(intinfo
.delay
,
1275 &(host
->cfgtable
->HostWrite
.CoalIntDelay
));
1276 writel(intinfo
.count
,
1277 &(host
->cfgtable
->HostWrite
.CoalIntCount
));
1278 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1280 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1281 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1282 & CFGTBL_ChangeReq
))
1284 /* delay and try again */
1287 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1288 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1292 case CCISS_GETNODENAME
:
1294 NodeName_type NodeName
;
1299 for (i
= 0; i
< 16; i
++)
1301 readb(&host
->cfgtable
->ServerName
[i
]);
1302 if (copy_to_user(argp
, NodeName
, sizeof(NodeName_type
)))
1306 case CCISS_SETNODENAME
:
1308 NodeName_type NodeName
;
1309 unsigned long flags
;
1314 if (!capable(CAP_SYS_ADMIN
))
1318 (NodeName
, argp
, sizeof(NodeName_type
)))
1321 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1323 /* Update the field, and then ring the doorbell */
1324 for (i
= 0; i
< 16; i
++)
1326 &host
->cfgtable
->ServerName
[i
]);
1328 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1330 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1331 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1332 & CFGTBL_ChangeReq
))
1334 /* delay and try again */
1337 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1338 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1343 case CCISS_GETHEARTBEAT
:
1345 Heartbeat_type heartbeat
;
1349 heartbeat
= readl(&host
->cfgtable
->HeartBeat
);
1351 (argp
, &heartbeat
, sizeof(Heartbeat_type
)))
1355 case CCISS_GETBUSTYPES
:
1357 BusTypes_type BusTypes
;
1361 BusTypes
= readl(&host
->cfgtable
->BusTypes
);
1363 (argp
, &BusTypes
, sizeof(BusTypes_type
)))
1367 case CCISS_GETFIRMVER
:
1369 FirmwareVer_type firmware
;
1373 memcpy(firmware
, host
->firm_ver
, 4);
1376 (argp
, firmware
, sizeof(FirmwareVer_type
)))
1380 case CCISS_GETDRIVVER
:
1382 DriverVer_type DriverVer
= DRIVER_VERSION
;
1388 (argp
, &DriverVer
, sizeof(DriverVer_type
)))
1393 case CCISS_DEREGDISK
:
1395 case CCISS_REVALIDVOLS
:
1396 return rebuild_lun_table(host
, 0, 1);
1398 case CCISS_GETLUNINFO
:{
1399 LogvolInfo_struct luninfo
;
1401 memcpy(&luninfo
.LunID
, drv
->LunID
,
1402 sizeof(luninfo
.LunID
));
1403 luninfo
.num_opens
= drv
->usage_count
;
1404 luninfo
.num_parts
= 0;
1405 if (copy_to_user(argp
, &luninfo
,
1406 sizeof(LogvolInfo_struct
)))
1410 case CCISS_PASSTHRU
:
1412 IOCTL_Command_struct iocommand
;
1413 CommandList_struct
*c
;
1416 DECLARE_COMPLETION_ONSTACK(wait
);
1421 if (!capable(CAP_SYS_RAWIO
))
1425 (&iocommand
, argp
, sizeof(IOCTL_Command_struct
)))
1427 if ((iocommand
.buf_size
< 1) &&
1428 (iocommand
.Request
.Type
.Direction
!= XFER_NONE
)) {
1431 #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
1432 /* Check kmalloc limits */
1433 if (iocommand
.buf_size
> 128000)
1436 if (iocommand
.buf_size
> 0) {
1437 buff
= kmalloc(iocommand
.buf_size
, GFP_KERNEL
);
1441 if (iocommand
.Request
.Type
.Direction
== XFER_WRITE
) {
1442 /* Copy the data into the buffer we created */
1444 (buff
, iocommand
.buf
, iocommand
.buf_size
)) {
1449 memset(buff
, 0, iocommand
.buf_size
);
1451 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1455 /* Fill in the command type */
1456 c
->cmd_type
= CMD_IOCTL_PEND
;
1457 /* Fill in Command Header */
1458 c
->Header
.ReplyQueue
= 0; /* unused in simple mode */
1459 if (iocommand
.buf_size
> 0) /* buffer to fill */
1461 c
->Header
.SGList
= 1;
1462 c
->Header
.SGTotal
= 1;
1463 } else /* no buffers to fill */
1465 c
->Header
.SGList
= 0;
1466 c
->Header
.SGTotal
= 0;
1468 c
->Header
.LUN
= iocommand
.LUN_info
;
1469 /* use the kernel address the cmd block for tag */
1470 c
->Header
.Tag
.lower
= c
->busaddr
;
1472 /* Fill in Request block */
1473 c
->Request
= iocommand
.Request
;
1475 /* Fill in the scatter gather information */
1476 if (iocommand
.buf_size
> 0) {
1477 temp64
.val
= pci_map_single(host
->pdev
, buff
,
1479 PCI_DMA_BIDIRECTIONAL
);
1480 c
->SG
[0].Addr
.lower
= temp64
.val32
.lower
;
1481 c
->SG
[0].Addr
.upper
= temp64
.val32
.upper
;
1482 c
->SG
[0].Len
= iocommand
.buf_size
;
1483 c
->SG
[0].Ext
= 0; /* we are not chaining */
1487 enqueue_cmd_and_start_io(host
, c
);
1488 wait_for_completion(&wait
);
1490 /* unlock the buffers from DMA */
1491 temp64
.val32
.lower
= c
->SG
[0].Addr
.lower
;
1492 temp64
.val32
.upper
= c
->SG
[0].Addr
.upper
;
1493 pci_unmap_single(host
->pdev
, (dma_addr_t
) temp64
.val
,
1495 PCI_DMA_BIDIRECTIONAL
);
1497 check_ioctl_unit_attention(host
, c
);
1499 /* Copy the error information out */
1500 iocommand
.error_info
= *(c
->err_info
);
1502 (argp
, &iocommand
, sizeof(IOCTL_Command_struct
))) {
1504 cmd_free(host
, c
, 0);
1508 if (iocommand
.Request
.Type
.Direction
== XFER_READ
) {
1509 /* Copy the data out of the buffer we created */
1511 (iocommand
.buf
, buff
, iocommand
.buf_size
)) {
1513 cmd_free(host
, c
, 0);
1518 cmd_free(host
, c
, 0);
1521 case CCISS_BIG_PASSTHRU
:{
1522 BIG_IOCTL_Command_struct
*ioc
;
1523 CommandList_struct
*c
;
1524 unsigned char **buff
= NULL
;
1525 int *buff_size
= NULL
;
1530 DECLARE_COMPLETION_ONSTACK(wait
);
1533 BYTE __user
*data_ptr
;
1537 if (!capable(CAP_SYS_RAWIO
))
1539 ioc
= (BIG_IOCTL_Command_struct
*)
1540 kmalloc(sizeof(*ioc
), GFP_KERNEL
);
1545 if (copy_from_user(ioc
, argp
, sizeof(*ioc
))) {
1549 if ((ioc
->buf_size
< 1) &&
1550 (ioc
->Request
.Type
.Direction
!= XFER_NONE
)) {
1554 /* Check kmalloc limits using all SGs */
1555 if (ioc
->malloc_size
> MAX_KMALLOC_SIZE
) {
1559 if (ioc
->buf_size
> ioc
->malloc_size
* MAXSGENTRIES
) {
1564 kzalloc(MAXSGENTRIES
* sizeof(char *), GFP_KERNEL
);
1569 buff_size
= kmalloc(MAXSGENTRIES
* sizeof(int),
1575 left
= ioc
->buf_size
;
1576 data_ptr
= ioc
->buf
;
1579 ioc
->malloc_size
) ? ioc
->
1581 buff_size
[sg_used
] = sz
;
1582 buff
[sg_used
] = kmalloc(sz
, GFP_KERNEL
);
1583 if (buff
[sg_used
] == NULL
) {
1587 if (ioc
->Request
.Type
.Direction
== XFER_WRITE
) {
1589 (buff
[sg_used
], data_ptr
, sz
)) {
1594 memset(buff
[sg_used
], 0, sz
);
1600 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1604 c
->cmd_type
= CMD_IOCTL_PEND
;
1605 c
->Header
.ReplyQueue
= 0;
1607 if (ioc
->buf_size
> 0) {
1608 c
->Header
.SGList
= sg_used
;
1609 c
->Header
.SGTotal
= sg_used
;
1611 c
->Header
.SGList
= 0;
1612 c
->Header
.SGTotal
= 0;
1614 c
->Header
.LUN
= ioc
->LUN_info
;
1615 c
->Header
.Tag
.lower
= c
->busaddr
;
1617 c
->Request
= ioc
->Request
;
1618 if (ioc
->buf_size
> 0) {
1619 for (i
= 0; i
< sg_used
; i
++) {
1621 pci_map_single(host
->pdev
, buff
[i
],
1623 PCI_DMA_BIDIRECTIONAL
);
1624 c
->SG
[i
].Addr
.lower
=
1626 c
->SG
[i
].Addr
.upper
=
1628 c
->SG
[i
].Len
= buff_size
[i
];
1629 c
->SG
[i
].Ext
= 0; /* we are not chaining */
1633 enqueue_cmd_and_start_io(host
, c
);
1634 wait_for_completion(&wait
);
1635 /* unlock the buffers from DMA */
1636 for (i
= 0; i
< sg_used
; i
++) {
1637 temp64
.val32
.lower
= c
->SG
[i
].Addr
.lower
;
1638 temp64
.val32
.upper
= c
->SG
[i
].Addr
.upper
;
1639 pci_unmap_single(host
->pdev
,
1640 (dma_addr_t
) temp64
.val
, buff_size
[i
],
1641 PCI_DMA_BIDIRECTIONAL
);
1643 check_ioctl_unit_attention(host
, c
);
1644 /* Copy the error information out */
1645 ioc
->error_info
= *(c
->err_info
);
1646 if (copy_to_user(argp
, ioc
, sizeof(*ioc
))) {
1647 cmd_free(host
, c
, 0);
1651 if (ioc
->Request
.Type
.Direction
== XFER_READ
) {
1652 /* Copy the data out of the buffer we created */
1653 BYTE __user
*ptr
= ioc
->buf
;
1654 for (i
= 0; i
< sg_used
; i
++) {
1656 (ptr
, buff
[i
], buff_size
[i
])) {
1657 cmd_free(host
, c
, 0);
1661 ptr
+= buff_size
[i
];
1664 cmd_free(host
, c
, 0);
1668 for (i
= 0; i
< sg_used
; i
++)
1677 /* scsi_cmd_ioctl handles these, below, though some are not */
1678 /* very meaningful for cciss. SG_IO is the main one people want. */
1680 case SG_GET_VERSION_NUM
:
1681 case SG_SET_TIMEOUT
:
1682 case SG_GET_TIMEOUT
:
1683 case SG_GET_RESERVED_SIZE
:
1684 case SG_SET_RESERVED_SIZE
:
1685 case SG_EMULATED_HOST
:
1687 case SCSI_IOCTL_SEND_COMMAND
:
1688 return scsi_cmd_ioctl(disk
->queue
, disk
, mode
, cmd
, argp
);
1690 /* scsi_cmd_ioctl would normally handle these, below, but */
1691 /* they aren't a good fit for cciss, as CD-ROMs are */
1692 /* not supported, and we don't have any bus/target/lun */
1693 /* which we present to the kernel. */
1695 case CDROM_SEND_PACKET
:
1696 case CDROMCLOSETRAY
:
1698 case SCSI_IOCTL_GET_IDLUN
:
1699 case SCSI_IOCTL_GET_BUS_NUMBER
:
1705 static void cciss_check_queues(ctlr_info_t
*h
)
1707 int start_queue
= h
->next_to_run
;
1710 /* check to see if we have maxed out the number of commands that can
1711 * be placed on the queue. If so then exit. We do this check here
1712 * in case the interrupt we serviced was from an ioctl and did not
1713 * free any new commands.
1715 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
)
1718 /* We have room on the queue for more commands. Now we need to queue
1719 * them up. We will also keep track of the next queue to run so
1720 * that every queue gets a chance to be started first.
1722 for (i
= 0; i
< h
->highest_lun
+ 1; i
++) {
1723 int curr_queue
= (start_queue
+ i
) % (h
->highest_lun
+ 1);
1724 /* make sure the disk has been added and the drive is real
1725 * because this can be called from the middle of init_one.
1727 if (!h
->drv
[curr_queue
])
1729 if (!(h
->drv
[curr_queue
]->queue
) ||
1730 !(h
->drv
[curr_queue
]->heads
))
1732 blk_start_queue(h
->gendisk
[curr_queue
]->queue
);
1734 /* check to see if we have maxed out the number of commands
1735 * that can be placed on the queue.
1737 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
) {
1738 if (curr_queue
== start_queue
) {
1740 (start_queue
+ 1) % (h
->highest_lun
+ 1);
1743 h
->next_to_run
= curr_queue
;
1750 static void cciss_softirq_done(struct request
*rq
)
1752 CommandList_struct
*cmd
= rq
->completion_data
;
1753 ctlr_info_t
*h
= hba
[cmd
->ctlr
];
1754 SGDescriptor_struct
*curr_sg
= cmd
->SG
;
1756 unsigned long flags
;
1760 if (cmd
->Request
.Type
.Direction
== XFER_READ
)
1761 ddir
= PCI_DMA_FROMDEVICE
;
1763 ddir
= PCI_DMA_TODEVICE
;
1765 /* command did not need to be retried */
1766 /* unmap the DMA mapping for all the scatter gather elements */
1767 for (i
= 0; i
< cmd
->Header
.SGList
; i
++) {
1768 if (curr_sg
[sg_index
].Ext
== CCISS_SG_CHAIN
) {
1769 cciss_unmap_sg_chain_block(h
, cmd
);
1770 /* Point to the next block */
1771 curr_sg
= h
->cmd_sg_list
[cmd
->cmdindex
];
1774 temp64
.val32
.lower
= curr_sg
[sg_index
].Addr
.lower
;
1775 temp64
.val32
.upper
= curr_sg
[sg_index
].Addr
.upper
;
1776 pci_unmap_page(h
->pdev
, temp64
.val
, curr_sg
[sg_index
].Len
,
1782 printk("Done with %p\n", rq
);
1783 #endif /* CCISS_DEBUG */
1785 /* set the residual count for pc requests */
1786 if (rq
->cmd_type
== REQ_TYPE_BLOCK_PC
)
1787 rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
1789 blk_end_request_all(rq
, (rq
->errors
== 0) ? 0 : -EIO
);
1791 spin_lock_irqsave(&h
->lock
, flags
);
1792 cmd_free(h
, cmd
, 1);
1793 cciss_check_queues(h
);
1794 spin_unlock_irqrestore(&h
->lock
, flags
);
1797 static inline void log_unit_to_scsi3addr(ctlr_info_t
*h
,
1798 unsigned char scsi3addr
[], uint32_t log_unit
)
1800 memcpy(scsi3addr
, h
->drv
[log_unit
]->LunID
,
1801 sizeof(h
->drv
[log_unit
]->LunID
));
1804 /* This function gets the SCSI vendor, model, and revision of a logical drive
1805 * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
1806 * they cannot be read.
1808 static void cciss_get_device_descr(int ctlr
, int logvol
,
1809 char *vendor
, char *model
, char *rev
)
1812 InquiryData_struct
*inq_buf
;
1813 unsigned char scsi3addr
[8];
1819 inq_buf
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1823 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1824 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, inq_buf
, sizeof(*inq_buf
), 0,
1825 scsi3addr
, TYPE_CMD
);
1827 memcpy(vendor
, &inq_buf
->data_byte
[8], VENDOR_LEN
);
1828 vendor
[VENDOR_LEN
] = '\0';
1829 memcpy(model
, &inq_buf
->data_byte
[16], MODEL_LEN
);
1830 model
[MODEL_LEN
] = '\0';
1831 memcpy(rev
, &inq_buf
->data_byte
[32], REV_LEN
);
1832 rev
[REV_LEN
] = '\0';
1839 /* This function gets the serial number of a logical drive via
1840 * inquiry page 0x83. Serial no. is 16 bytes. If the serial
1841 * number cannot be had, for whatever reason, 16 bytes of 0xff
1842 * are returned instead.
1844 static void cciss_get_serial_no(int ctlr
, int logvol
,
1845 unsigned char *serial_no
, int buflen
)
1847 #define PAGE_83_INQ_BYTES 64
1850 unsigned char scsi3addr
[8];
1854 memset(serial_no
, 0xff, buflen
);
1855 buf
= kzalloc(PAGE_83_INQ_BYTES
, GFP_KERNEL
);
1858 memset(serial_no
, 0, buflen
);
1859 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1860 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, buf
,
1861 PAGE_83_INQ_BYTES
, 0x83, scsi3addr
, TYPE_CMD
);
1863 memcpy(serial_no
, &buf
[8], buflen
);
1869 * cciss_add_disk sets up the block device queue for a logical drive
1871 static int cciss_add_disk(ctlr_info_t
*h
, struct gendisk
*disk
,
1874 disk
->queue
= blk_init_queue(do_cciss_request
, &h
->lock
);
1876 goto init_queue_failure
;
1877 sprintf(disk
->disk_name
, "cciss/c%dd%d", h
->ctlr
, drv_index
);
1878 disk
->major
= h
->major
;
1879 disk
->first_minor
= drv_index
<< NWD_SHIFT
;
1880 disk
->fops
= &cciss_fops
;
1881 if (cciss_create_ld_sysfs_entry(h
, drv_index
))
1883 disk
->private_data
= h
->drv
[drv_index
];
1884 disk
->driverfs_dev
= &h
->drv
[drv_index
]->dev
;
1886 /* Set up queue information */
1887 blk_queue_bounce_limit(disk
->queue
, h
->pdev
->dma_mask
);
1889 /* This is a hardware imposed limit. */
1890 blk_queue_max_segments(disk
->queue
, h
->maxsgentries
);
1892 blk_queue_max_hw_sectors(disk
->queue
, h
->cciss_max_sectors
);
1894 blk_queue_softirq_done(disk
->queue
, cciss_softirq_done
);
1896 disk
->queue
->queuedata
= h
;
1898 blk_queue_logical_block_size(disk
->queue
,
1899 h
->drv
[drv_index
]->block_size
);
1901 /* Make sure all queue data is written out before */
1902 /* setting h->drv[drv_index]->queue, as setting this */
1903 /* allows the interrupt handler to start the queue */
1905 h
->drv
[drv_index
]->queue
= disk
->queue
;
1910 blk_cleanup_queue(disk
->queue
);
1916 /* This function will check the usage_count of the drive to be updated/added.
1917 * If the usage_count is zero and it is a heretofore unknown drive, or,
1918 * the drive's capacity, geometry, or serial number has changed,
1919 * then the drive information will be updated and the disk will be
1920 * re-registered with the kernel. If these conditions don't hold,
1921 * then it will be left alone for the next reboot. The exception to this
1922 * is disk 0 which will always be left registered with the kernel since it
1923 * is also the controller node. Any changes to disk 0 will show up on
1926 static void cciss_update_drive_info(int ctlr
, int drv_index
, int first_time
,
1929 ctlr_info_t
*h
= hba
[ctlr
];
1930 struct gendisk
*disk
;
1931 InquiryData_struct
*inq_buff
= NULL
;
1932 unsigned int block_size
;
1933 sector_t total_size
;
1934 unsigned long flags
= 0;
1936 drive_info_struct
*drvinfo
;
1938 /* Get information about the disk and modify the driver structure */
1939 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1940 drvinfo
= kzalloc(sizeof(*drvinfo
), GFP_KERNEL
);
1941 if (inq_buff
== NULL
|| drvinfo
== NULL
)
1944 /* testing to see if 16-byte CDBs are already being used */
1945 if (h
->cciss_read
== CCISS_READ_16
) {
1946 cciss_read_capacity_16(h
->ctlr
, drv_index
,
1947 &total_size
, &block_size
);
1950 cciss_read_capacity(ctlr
, drv_index
, &total_size
, &block_size
);
1951 /* if read_capacity returns all F's this volume is >2TB */
1952 /* in size so we switch to 16-byte CDB's for all */
1953 /* read/write ops */
1954 if (total_size
== 0xFFFFFFFFULL
) {
1955 cciss_read_capacity_16(ctlr
, drv_index
,
1956 &total_size
, &block_size
);
1957 h
->cciss_read
= CCISS_READ_16
;
1958 h
->cciss_write
= CCISS_WRITE_16
;
1960 h
->cciss_read
= CCISS_READ_10
;
1961 h
->cciss_write
= CCISS_WRITE_10
;
1965 cciss_geometry_inquiry(ctlr
, drv_index
, total_size
, block_size
,
1967 drvinfo
->block_size
= block_size
;
1968 drvinfo
->nr_blocks
= total_size
+ 1;
1970 cciss_get_device_descr(ctlr
, drv_index
, drvinfo
->vendor
,
1971 drvinfo
->model
, drvinfo
->rev
);
1972 cciss_get_serial_no(ctlr
, drv_index
, drvinfo
->serial_no
,
1973 sizeof(drvinfo
->serial_no
));
1974 /* Save the lunid in case we deregister the disk, below. */
1975 memcpy(drvinfo
->LunID
, h
->drv
[drv_index
]->LunID
,
1976 sizeof(drvinfo
->LunID
));
1978 /* Is it the same disk we already know, and nothing's changed? */
1979 if (h
->drv
[drv_index
]->raid_level
!= -1 &&
1980 ((memcmp(drvinfo
->serial_no
,
1981 h
->drv
[drv_index
]->serial_no
, 16) == 0) &&
1982 drvinfo
->block_size
== h
->drv
[drv_index
]->block_size
&&
1983 drvinfo
->nr_blocks
== h
->drv
[drv_index
]->nr_blocks
&&
1984 drvinfo
->heads
== h
->drv
[drv_index
]->heads
&&
1985 drvinfo
->sectors
== h
->drv
[drv_index
]->sectors
&&
1986 drvinfo
->cylinders
== h
->drv
[drv_index
]->cylinders
))
1987 /* The disk is unchanged, nothing to update */
1990 /* If we get here it's not the same disk, or something's changed,
1991 * so we need to * deregister it, and re-register it, if it's not
1993 * If the disk already exists then deregister it before proceeding
1994 * (unless it's the first disk (for the controller node).
1996 if (h
->drv
[drv_index
]->raid_level
!= -1 && drv_index
!= 0) {
1997 printk(KERN_WARNING
"disk %d has changed.\n", drv_index
);
1998 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1999 h
->drv
[drv_index
]->busy_configuring
= 1;
2000 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2002 /* deregister_disk sets h->drv[drv_index]->queue = NULL
2003 * which keeps the interrupt handler from starting
2006 ret
= deregister_disk(h
, drv_index
, 0, via_ioctl
);
2009 /* If the disk is in use return */
2013 /* Save the new information from cciss_geometry_inquiry
2014 * and serial number inquiry. If the disk was deregistered
2015 * above, then h->drv[drv_index] will be NULL.
2017 if (h
->drv
[drv_index
] == NULL
) {
2018 drvinfo
->device_initialized
= 0;
2019 h
->drv
[drv_index
] = drvinfo
;
2020 drvinfo
= NULL
; /* so it won't be freed below. */
2022 /* special case for cxd0 */
2023 h
->drv
[drv_index
]->block_size
= drvinfo
->block_size
;
2024 h
->drv
[drv_index
]->nr_blocks
= drvinfo
->nr_blocks
;
2025 h
->drv
[drv_index
]->heads
= drvinfo
->heads
;
2026 h
->drv
[drv_index
]->sectors
= drvinfo
->sectors
;
2027 h
->drv
[drv_index
]->cylinders
= drvinfo
->cylinders
;
2028 h
->drv
[drv_index
]->raid_level
= drvinfo
->raid_level
;
2029 memcpy(h
->drv
[drv_index
]->serial_no
, drvinfo
->serial_no
, 16);
2030 memcpy(h
->drv
[drv_index
]->vendor
, drvinfo
->vendor
,
2032 memcpy(h
->drv
[drv_index
]->model
, drvinfo
->model
, MODEL_LEN
+ 1);
2033 memcpy(h
->drv
[drv_index
]->rev
, drvinfo
->rev
, REV_LEN
+ 1);
2037 disk
= h
->gendisk
[drv_index
];
2038 set_capacity(disk
, h
->drv
[drv_index
]->nr_blocks
);
2040 /* If it's not disk 0 (drv_index != 0)
2041 * or if it was disk 0, but there was previously
2042 * no actual corresponding configured logical drive
2043 * (raid_leve == -1) then we want to update the
2044 * logical drive's information.
2046 if (drv_index
|| first_time
) {
2047 if (cciss_add_disk(h
, disk
, drv_index
) != 0) {
2048 cciss_free_gendisk(h
, drv_index
);
2049 cciss_free_drive_info(h
, drv_index
);
2050 printk(KERN_WARNING
"cciss:%d could not update "
2051 "disk %d\n", h
->ctlr
, drv_index
);
2061 printk(KERN_ERR
"cciss: out of memory\n");
2065 /* This function will find the first index of the controllers drive array
2066 * that has a null drv pointer and allocate the drive info struct and
2067 * will return that index This is where new drives will be added.
2068 * If the index to be returned is greater than the highest_lun index for
2069 * the controller then highest_lun is set * to this new index.
2070 * If there are no available indexes or if tha allocation fails, then -1
2071 * is returned. * "controller_node" is used to know if this is a real
2072 * logical drive, or just the controller node, which determines if this
2073 * counts towards highest_lun.
2075 static int cciss_alloc_drive_info(ctlr_info_t
*h
, int controller_node
)
2078 drive_info_struct
*drv
;
2080 /* Search for an empty slot for our drive info */
2081 for (i
= 0; i
< CISS_MAX_LUN
; i
++) {
2083 /* if not cxd0 case, and it's occupied, skip it. */
2084 if (h
->drv
[i
] && i
!= 0)
2087 * If it's cxd0 case, and drv is alloc'ed already, and a
2088 * disk is configured there, skip it.
2090 if (i
== 0 && h
->drv
[i
] && h
->drv
[i
]->raid_level
!= -1)
2094 * We've found an empty slot. Update highest_lun
2095 * provided this isn't just the fake cxd0 controller node.
2097 if (i
> h
->highest_lun
&& !controller_node
)
2100 /* If adding a real disk at cxd0, and it's already alloc'ed */
2101 if (i
== 0 && h
->drv
[i
] != NULL
)
2105 * Found an empty slot, not already alloc'ed. Allocate it.
2106 * Mark it with raid_level == -1, so we know it's new later on.
2108 drv
= kzalloc(sizeof(*drv
), GFP_KERNEL
);
2111 drv
->raid_level
= -1; /* so we know it's new */
2118 static void cciss_free_drive_info(ctlr_info_t
*h
, int drv_index
)
2120 kfree(h
->drv
[drv_index
]);
2121 h
->drv
[drv_index
] = NULL
;
2124 static void cciss_free_gendisk(ctlr_info_t
*h
, int drv_index
)
2126 put_disk(h
->gendisk
[drv_index
]);
2127 h
->gendisk
[drv_index
] = NULL
;
2130 /* cciss_add_gendisk finds a free hba[]->drv structure
2131 * and allocates a gendisk if needed, and sets the lunid
2132 * in the drvinfo structure. It returns the index into
2133 * the ->drv[] array, or -1 if none are free.
2134 * is_controller_node indicates whether highest_lun should
2135 * count this disk, or if it's only being added to provide
2136 * a means to talk to the controller in case no logical
2137 * drives have yet been configured.
2139 static int cciss_add_gendisk(ctlr_info_t
*h
, unsigned char lunid
[],
2140 int controller_node
)
2144 drv_index
= cciss_alloc_drive_info(h
, controller_node
);
2145 if (drv_index
== -1)
2148 /*Check if the gendisk needs to be allocated */
2149 if (!h
->gendisk
[drv_index
]) {
2150 h
->gendisk
[drv_index
] =
2151 alloc_disk(1 << NWD_SHIFT
);
2152 if (!h
->gendisk
[drv_index
]) {
2153 printk(KERN_ERR
"cciss%d: could not "
2154 "allocate a new disk %d\n",
2155 h
->ctlr
, drv_index
);
2156 goto err_free_drive_info
;
2159 memcpy(h
->drv
[drv_index
]->LunID
, lunid
,
2160 sizeof(h
->drv
[drv_index
]->LunID
));
2161 if (cciss_create_ld_sysfs_entry(h
, drv_index
))
2163 /* Don't need to mark this busy because nobody */
2164 /* else knows about this disk yet to contend */
2165 /* for access to it. */
2166 h
->drv
[drv_index
]->busy_configuring
= 0;
2171 cciss_free_gendisk(h
, drv_index
);
2172 err_free_drive_info
:
2173 cciss_free_drive_info(h
, drv_index
);
2177 /* This is for the special case of a controller which
2178 * has no logical drives. In this case, we still need
2179 * to register a disk so the controller can be accessed
2180 * by the Array Config Utility.
2182 static void cciss_add_controller_node(ctlr_info_t
*h
)
2184 struct gendisk
*disk
;
2187 if (h
->gendisk
[0] != NULL
) /* already did this? Then bail. */
2190 drv_index
= cciss_add_gendisk(h
, CTLR_LUNID
, 1);
2191 if (drv_index
== -1)
2193 h
->drv
[drv_index
]->block_size
= 512;
2194 h
->drv
[drv_index
]->nr_blocks
= 0;
2195 h
->drv
[drv_index
]->heads
= 0;
2196 h
->drv
[drv_index
]->sectors
= 0;
2197 h
->drv
[drv_index
]->cylinders
= 0;
2198 h
->drv
[drv_index
]->raid_level
= -1;
2199 memset(h
->drv
[drv_index
]->serial_no
, 0, 16);
2200 disk
= h
->gendisk
[drv_index
];
2201 if (cciss_add_disk(h
, disk
, drv_index
) == 0)
2203 cciss_free_gendisk(h
, drv_index
);
2204 cciss_free_drive_info(h
, drv_index
);
2206 printk(KERN_WARNING
"cciss%d: could not "
2207 "add disk 0.\n", h
->ctlr
);
2211 /* This function will add and remove logical drives from the Logical
2212 * drive array of the controller and maintain persistency of ordering
2213 * so that mount points are preserved until the next reboot. This allows
2214 * for the removal of logical drives in the middle of the drive array
2215 * without a re-ordering of those drives.
2217 * h = The controller to perform the operations on
2219 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
,
2224 ReportLunData_struct
*ld_buff
= NULL
;
2230 unsigned char lunid
[8] = CTLR_LUNID
;
2231 unsigned long flags
;
2233 if (!capable(CAP_SYS_RAWIO
))
2236 /* Set busy_configuring flag for this operation */
2237 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2238 if (h
->busy_configuring
) {
2239 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2242 h
->busy_configuring
= 1;
2243 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2245 ld_buff
= kzalloc(sizeof(ReportLunData_struct
), GFP_KERNEL
);
2246 if (ld_buff
== NULL
)
2249 return_code
= sendcmd_withirq(CISS_REPORT_LOG
, ctlr
, ld_buff
,
2250 sizeof(ReportLunData_struct
),
2251 0, CTLR_LUNID
, TYPE_CMD
);
2253 if (return_code
== IO_OK
)
2254 listlength
= be32_to_cpu(*(__be32
*) ld_buff
->LUNListLength
);
2255 else { /* reading number of logical volumes failed */
2256 printk(KERN_WARNING
"cciss: report logical volume"
2257 " command failed\n");
2262 num_luns
= listlength
/ 8; /* 8 bytes per entry */
2263 if (num_luns
> CISS_MAX_LUN
) {
2264 num_luns
= CISS_MAX_LUN
;
2265 printk(KERN_WARNING
"cciss: more luns configured"
2266 " on controller than can be handled by"
2271 cciss_add_controller_node(h
);
2273 /* Compare controller drive array to driver's drive array
2274 * to see if any drives are missing on the controller due
2275 * to action of Array Config Utility (user deletes drive)
2276 * and deregister logical drives which have disappeared.
2278 for (i
= 0; i
<= h
->highest_lun
; i
++) {
2282 /* skip holes in the array from already deleted drives */
2283 if (h
->drv
[i
] == NULL
)
2286 for (j
= 0; j
< num_luns
; j
++) {
2287 memcpy(lunid
, &ld_buff
->LUN
[j
][0], sizeof(lunid
));
2288 if (memcmp(h
->drv
[i
]->LunID
, lunid
,
2289 sizeof(lunid
)) == 0) {
2295 /* Deregister it from the OS, it's gone. */
2296 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2297 h
->drv
[i
]->busy_configuring
= 1;
2298 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2299 return_code
= deregister_disk(h
, i
, 1, via_ioctl
);
2300 if (h
->drv
[i
] != NULL
)
2301 h
->drv
[i
]->busy_configuring
= 0;
2305 /* Compare controller drive array to driver's drive array.
2306 * Check for updates in the drive information and any new drives
2307 * on the controller due to ACU adding logical drives, or changing
2308 * a logical drive's size, etc. Reregister any new/changed drives
2310 for (i
= 0; i
< num_luns
; i
++) {
2315 memcpy(lunid
, &ld_buff
->LUN
[i
][0], sizeof(lunid
));
2316 /* Find if the LUN is already in the drive array
2317 * of the driver. If so then update its info
2318 * if not in use. If it does not exist then find
2319 * the first free index and add it.
2321 for (j
= 0; j
<= h
->highest_lun
; j
++) {
2322 if (h
->drv
[j
] != NULL
&&
2323 memcmp(h
->drv
[j
]->LunID
, lunid
,
2324 sizeof(h
->drv
[j
]->LunID
)) == 0) {
2331 /* check if the drive was found already in the array */
2333 drv_index
= cciss_add_gendisk(h
, lunid
, 0);
2334 if (drv_index
== -1)
2337 cciss_update_drive_info(ctlr
, drv_index
, first_time
,
2343 h
->busy_configuring
= 0;
2344 /* We return -1 here to tell the ACU that we have registered/updated
2345 * all of the drives that we can and to keep it from calling us
2350 printk(KERN_ERR
"cciss: out of memory\n");
2351 h
->busy_configuring
= 0;
2355 static void cciss_clear_drive_info(drive_info_struct
*drive_info
)
2357 /* zero out the disk size info */
2358 drive_info
->nr_blocks
= 0;
2359 drive_info
->block_size
= 0;
2360 drive_info
->heads
= 0;
2361 drive_info
->sectors
= 0;
2362 drive_info
->cylinders
= 0;
2363 drive_info
->raid_level
= -1;
2364 memset(drive_info
->serial_no
, 0, sizeof(drive_info
->serial_no
));
2365 memset(drive_info
->model
, 0, sizeof(drive_info
->model
));
2366 memset(drive_info
->rev
, 0, sizeof(drive_info
->rev
));
2367 memset(drive_info
->vendor
, 0, sizeof(drive_info
->vendor
));
2369 * don't clear the LUNID though, we need to remember which
2374 /* This function will deregister the disk and it's queue from the
2375 * kernel. It must be called with the controller lock held and the
2376 * drv structures busy_configuring flag set. It's parameters are:
2378 * disk = This is the disk to be deregistered
2379 * drv = This is the drive_info_struct associated with the disk to be
2380 * deregistered. It contains information about the disk used
2382 * clear_all = This flag determines whether or not the disk information
2383 * is going to be completely cleared out and the highest_lun
2384 * reset. Sometimes we want to clear out information about
2385 * the disk in preparation for re-adding it. In this case
2386 * the highest_lun should be left unchanged and the LunID
2387 * should not be cleared.
2389 * This indicates whether we've reached this path via ioctl.
2390 * This affects the maximum usage count allowed for c0d0 to be messed with.
2391 * If this path is reached via ioctl(), then the max_usage_count will
2392 * be 1, as the process calling ioctl() has got to have the device open.
2393 * If we get here via sysfs, then the max usage count will be zero.
2395 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
2396 int clear_all
, int via_ioctl
)
2399 struct gendisk
*disk
;
2400 drive_info_struct
*drv
;
2401 int recalculate_highest_lun
;
2403 if (!capable(CAP_SYS_RAWIO
))
2406 drv
= h
->drv
[drv_index
];
2407 disk
= h
->gendisk
[drv_index
];
2409 /* make sure logical volume is NOT is use */
2410 if (clear_all
|| (h
->gendisk
[0] == disk
)) {
2411 if (drv
->usage_count
> via_ioctl
)
2413 } else if (drv
->usage_count
> 0)
2416 recalculate_highest_lun
= (drv
== h
->drv
[h
->highest_lun
]);
2418 /* invalidate the devices and deregister the disk. If it is disk
2419 * zero do not deregister it but just zero out it's values. This
2420 * allows us to delete disk zero but keep the controller registered.
2422 if (h
->gendisk
[0] != disk
) {
2423 struct request_queue
*q
= disk
->queue
;
2424 if (disk
->flags
& GENHD_FL_UP
) {
2425 cciss_destroy_ld_sysfs_entry(h
, drv_index
, 0);
2429 blk_cleanup_queue(q
);
2430 /* If clear_all is set then we are deleting the logical
2431 * drive, not just refreshing its info. For drives
2432 * other than disk 0 we will call put_disk. We do not
2433 * do this for disk 0 as we need it to be able to
2434 * configure the controller.
2437 /* This isn't pretty, but we need to find the
2438 * disk in our array and NULL our the pointer.
2439 * This is so that we will call alloc_disk if
2440 * this index is used again later.
2442 for (i
=0; i
< CISS_MAX_LUN
; i
++){
2443 if (h
->gendisk
[i
] == disk
) {
2444 h
->gendisk
[i
] = NULL
;
2451 set_capacity(disk
, 0);
2452 cciss_clear_drive_info(drv
);
2457 /* if it was the last disk, find the new hightest lun */
2458 if (clear_all
&& recalculate_highest_lun
) {
2459 int newhighest
= -1;
2460 for (i
= 0; i
<= h
->highest_lun
; i
++) {
2461 /* if the disk has size > 0, it is available */
2462 if (h
->drv
[i
] && h
->drv
[i
]->heads
)
2465 h
->highest_lun
= newhighest
;
2470 static int fill_cmd(CommandList_struct
*c
, __u8 cmd
, int ctlr
, void *buff
,
2471 size_t size
, __u8 page_code
, unsigned char *scsi3addr
,
2474 ctlr_info_t
*h
= hba
[ctlr
];
2475 u64bit buff_dma_handle
;
2478 c
->cmd_type
= CMD_IOCTL_PEND
;
2479 c
->Header
.ReplyQueue
= 0;
2481 c
->Header
.SGList
= 1;
2482 c
->Header
.SGTotal
= 1;
2484 c
->Header
.SGList
= 0;
2485 c
->Header
.SGTotal
= 0;
2487 c
->Header
.Tag
.lower
= c
->busaddr
;
2488 memcpy(c
->Header
.LUN
.LunAddrBytes
, scsi3addr
, 8);
2490 c
->Request
.Type
.Type
= cmd_type
;
2491 if (cmd_type
== TYPE_CMD
) {
2494 /* are we trying to read a vital product page */
2495 if (page_code
!= 0) {
2496 c
->Request
.CDB
[1] = 0x01;
2497 c
->Request
.CDB
[2] = page_code
;
2499 c
->Request
.CDBLen
= 6;
2500 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2501 c
->Request
.Type
.Direction
= XFER_READ
;
2502 c
->Request
.Timeout
= 0;
2503 c
->Request
.CDB
[0] = CISS_INQUIRY
;
2504 c
->Request
.CDB
[4] = size
& 0xFF;
2506 case CISS_REPORT_LOG
:
2507 case CISS_REPORT_PHYS
:
2508 /* Talking to controller so It's a physical command
2509 mode = 00 target = 0. Nothing to write.
2511 c
->Request
.CDBLen
= 12;
2512 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2513 c
->Request
.Type
.Direction
= XFER_READ
;
2514 c
->Request
.Timeout
= 0;
2515 c
->Request
.CDB
[0] = cmd
;
2516 c
->Request
.CDB
[6] = (size
>> 24) & 0xFF; /* MSB */
2517 c
->Request
.CDB
[7] = (size
>> 16) & 0xFF;
2518 c
->Request
.CDB
[8] = (size
>> 8) & 0xFF;
2519 c
->Request
.CDB
[9] = size
& 0xFF;
2522 case CCISS_READ_CAPACITY
:
2523 c
->Request
.CDBLen
= 10;
2524 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2525 c
->Request
.Type
.Direction
= XFER_READ
;
2526 c
->Request
.Timeout
= 0;
2527 c
->Request
.CDB
[0] = cmd
;
2529 case CCISS_READ_CAPACITY_16
:
2530 c
->Request
.CDBLen
= 16;
2531 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2532 c
->Request
.Type
.Direction
= XFER_READ
;
2533 c
->Request
.Timeout
= 0;
2534 c
->Request
.CDB
[0] = cmd
;
2535 c
->Request
.CDB
[1] = 0x10;
2536 c
->Request
.CDB
[10] = (size
>> 24) & 0xFF;
2537 c
->Request
.CDB
[11] = (size
>> 16) & 0xFF;
2538 c
->Request
.CDB
[12] = (size
>> 8) & 0xFF;
2539 c
->Request
.CDB
[13] = size
& 0xFF;
2540 c
->Request
.Timeout
= 0;
2541 c
->Request
.CDB
[0] = cmd
;
2543 case CCISS_CACHE_FLUSH
:
2544 c
->Request
.CDBLen
= 12;
2545 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2546 c
->Request
.Type
.Direction
= XFER_WRITE
;
2547 c
->Request
.Timeout
= 0;
2548 c
->Request
.CDB
[0] = BMIC_WRITE
;
2549 c
->Request
.CDB
[6] = BMIC_CACHE_FLUSH
;
2551 case TEST_UNIT_READY
:
2552 c
->Request
.CDBLen
= 6;
2553 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2554 c
->Request
.Type
.Direction
= XFER_NONE
;
2555 c
->Request
.Timeout
= 0;
2559 "cciss%d: Unknown Command 0x%c\n", ctlr
, cmd
);
2562 } else if (cmd_type
== TYPE_MSG
) {
2564 case 0: /* ABORT message */
2565 c
->Request
.CDBLen
= 12;
2566 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2567 c
->Request
.Type
.Direction
= XFER_WRITE
;
2568 c
->Request
.Timeout
= 0;
2569 c
->Request
.CDB
[0] = cmd
; /* abort */
2570 c
->Request
.CDB
[1] = 0; /* abort a command */
2571 /* buff contains the tag of the command to abort */
2572 memcpy(&c
->Request
.CDB
[4], buff
, 8);
2574 case 1: /* RESET message */
2575 c
->Request
.CDBLen
= 16;
2576 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2577 c
->Request
.Type
.Direction
= XFER_NONE
;
2578 c
->Request
.Timeout
= 0;
2579 memset(&c
->Request
.CDB
[0], 0, sizeof(c
->Request
.CDB
));
2580 c
->Request
.CDB
[0] = cmd
; /* reset */
2581 c
->Request
.CDB
[1] = 0x03; /* reset a target */
2583 case 3: /* No-Op message */
2584 c
->Request
.CDBLen
= 1;
2585 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2586 c
->Request
.Type
.Direction
= XFER_WRITE
;
2587 c
->Request
.Timeout
= 0;
2588 c
->Request
.CDB
[0] = cmd
;
2592 "cciss%d: unknown message type %d\n", ctlr
, cmd
);
2597 "cciss%d: unknown command type %d\n", ctlr
, cmd_type
);
2600 /* Fill in the scatter gather information */
2602 buff_dma_handle
.val
= (__u64
) pci_map_single(h
->pdev
,
2604 PCI_DMA_BIDIRECTIONAL
);
2605 c
->SG
[0].Addr
.lower
= buff_dma_handle
.val32
.lower
;
2606 c
->SG
[0].Addr
.upper
= buff_dma_handle
.val32
.upper
;
2607 c
->SG
[0].Len
= size
;
2608 c
->SG
[0].Ext
= 0; /* we are not chaining */
2613 static int check_target_status(ctlr_info_t
*h
, CommandList_struct
*c
)
2615 switch (c
->err_info
->ScsiStatus
) {
2618 case SAM_STAT_CHECK_CONDITION
:
2619 switch (0xf & c
->err_info
->SenseInfo
[2]) {
2620 case 0: return IO_OK
; /* no sense */
2621 case 1: return IO_OK
; /* recovered error */
2623 if (check_for_unit_attention(h
, c
))
2624 return IO_NEEDS_RETRY
;
2625 printk(KERN_WARNING
"cciss%d: cmd 0x%02x "
2626 "check condition, sense key = 0x%02x\n",
2627 h
->ctlr
, c
->Request
.CDB
[0],
2628 c
->err_info
->SenseInfo
[2]);
2632 printk(KERN_WARNING
"cciss%d: cmd 0x%02x"
2633 "scsi status = 0x%02x\n", h
->ctlr
,
2634 c
->Request
.CDB
[0], c
->err_info
->ScsiStatus
);
2640 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
)
2642 int return_status
= IO_OK
;
2644 if (c
->err_info
->CommandStatus
== CMD_SUCCESS
)
2647 switch (c
->err_info
->CommandStatus
) {
2648 case CMD_TARGET_STATUS
:
2649 return_status
= check_target_status(h
, c
);
2651 case CMD_DATA_UNDERRUN
:
2652 case CMD_DATA_OVERRUN
:
2653 /* expected for inquiry and report lun commands */
2656 printk(KERN_WARNING
"cciss: cmd 0x%02x is "
2657 "reported invalid\n", c
->Request
.CDB
[0]);
2658 return_status
= IO_ERROR
;
2660 case CMD_PROTOCOL_ERR
:
2661 printk(KERN_WARNING
"cciss: cmd 0x%02x has "
2662 "protocol error \n", c
->Request
.CDB
[0]);
2663 return_status
= IO_ERROR
;
2665 case CMD_HARDWARE_ERR
:
2666 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2667 " hardware error\n", c
->Request
.CDB
[0]);
2668 return_status
= IO_ERROR
;
2670 case CMD_CONNECTION_LOST
:
2671 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2672 "connection lost\n", c
->Request
.CDB
[0]);
2673 return_status
= IO_ERROR
;
2676 printk(KERN_WARNING
"cciss: cmd 0x%02x was "
2677 "aborted\n", c
->Request
.CDB
[0]);
2678 return_status
= IO_ERROR
;
2680 case CMD_ABORT_FAILED
:
2681 printk(KERN_WARNING
"cciss: cmd 0x%02x reports "
2682 "abort failed\n", c
->Request
.CDB
[0]);
2683 return_status
= IO_ERROR
;
2685 case CMD_UNSOLICITED_ABORT
:
2687 "cciss%d: unsolicited abort 0x%02x\n", h
->ctlr
,
2689 return_status
= IO_NEEDS_RETRY
;
2692 printk(KERN_WARNING
"cciss: cmd 0x%02x returned "
2693 "unknown status %x\n", c
->Request
.CDB
[0],
2694 c
->err_info
->CommandStatus
);
2695 return_status
= IO_ERROR
;
2697 return return_status
;
2700 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
2703 DECLARE_COMPLETION_ONSTACK(wait
);
2704 u64bit buff_dma_handle
;
2705 int return_status
= IO_OK
;
2709 enqueue_cmd_and_start_io(h
, c
);
2711 wait_for_completion(&wait
);
2713 if (c
->err_info
->CommandStatus
== 0 || !attempt_retry
)
2716 return_status
= process_sendcmd_error(h
, c
);
2718 if (return_status
== IO_NEEDS_RETRY
&&
2719 c
->retry_count
< MAX_CMD_RETRIES
) {
2720 printk(KERN_WARNING
"cciss%d: retrying 0x%02x\n", h
->ctlr
,
2723 /* erase the old error information */
2724 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2725 return_status
= IO_OK
;
2726 INIT_COMPLETION(wait
);
2731 /* unlock the buffers from DMA */
2732 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2733 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2734 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2735 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2736 return return_status
;
2739 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
2740 __u8 page_code
, unsigned char scsi3addr
[],
2743 ctlr_info_t
*h
= hba
[ctlr
];
2744 CommandList_struct
*c
;
2747 c
= cmd_alloc(h
, 0);
2750 return_status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, page_code
,
2751 scsi3addr
, cmd_type
);
2752 if (return_status
== IO_OK
)
2753 return_status
= sendcmd_withirq_core(h
, c
, 1);
2756 return return_status
;
2759 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
2760 sector_t total_size
,
2761 unsigned int block_size
,
2762 InquiryData_struct
*inq_buff
,
2763 drive_info_struct
*drv
)
2767 unsigned char scsi3addr
[8];
2769 memset(inq_buff
, 0, sizeof(InquiryData_struct
));
2770 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2771 return_code
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, inq_buff
,
2772 sizeof(*inq_buff
), 0xC1, scsi3addr
, TYPE_CMD
);
2773 if (return_code
== IO_OK
) {
2774 if (inq_buff
->data_byte
[8] == 0xFF) {
2776 "cciss: reading geometry failed, volume "
2777 "does not support reading geometry\n");
2779 drv
->sectors
= 32; /* Sectors per track */
2780 drv
->cylinders
= total_size
+ 1;
2781 drv
->raid_level
= RAID_UNKNOWN
;
2783 drv
->heads
= inq_buff
->data_byte
[6];
2784 drv
->sectors
= inq_buff
->data_byte
[7];
2785 drv
->cylinders
= (inq_buff
->data_byte
[4] & 0xff) << 8;
2786 drv
->cylinders
+= inq_buff
->data_byte
[5];
2787 drv
->raid_level
= inq_buff
->data_byte
[8];
2789 drv
->block_size
= block_size
;
2790 drv
->nr_blocks
= total_size
+ 1;
2791 t
= drv
->heads
* drv
->sectors
;
2793 sector_t real_size
= total_size
+ 1;
2794 unsigned long rem
= sector_div(real_size
, t
);
2797 drv
->cylinders
= real_size
;
2799 } else { /* Get geometry failed */
2800 printk(KERN_WARNING
"cciss: reading geometry failed\n");
2805 cciss_read_capacity(int ctlr
, int logvol
, sector_t
*total_size
,
2806 unsigned int *block_size
)
2808 ReadCapdata_struct
*buf
;
2810 unsigned char scsi3addr
[8];
2812 buf
= kzalloc(sizeof(ReadCapdata_struct
), GFP_KERNEL
);
2814 printk(KERN_WARNING
"cciss: out of memory\n");
2818 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2819 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY
, ctlr
, buf
,
2820 sizeof(ReadCapdata_struct
), 0, scsi3addr
, TYPE_CMD
);
2821 if (return_code
== IO_OK
) {
2822 *total_size
= be32_to_cpu(*(__be32
*) buf
->total_size
);
2823 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2824 } else { /* read capacity command failed */
2825 printk(KERN_WARNING
"cciss: read capacity failed\n");
2827 *block_size
= BLOCK_SIZE
;
2832 static void cciss_read_capacity_16(int ctlr
, int logvol
,
2833 sector_t
*total_size
, unsigned int *block_size
)
2835 ReadCapdata_struct_16
*buf
;
2837 unsigned char scsi3addr
[8];
2839 buf
= kzalloc(sizeof(ReadCapdata_struct_16
), GFP_KERNEL
);
2841 printk(KERN_WARNING
"cciss: out of memory\n");
2845 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2846 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY_16
,
2847 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2848 0, scsi3addr
, TYPE_CMD
);
2849 if (return_code
== IO_OK
) {
2850 *total_size
= be64_to_cpu(*(__be64
*) buf
->total_size
);
2851 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2852 } else { /* read capacity command failed */
2853 printk(KERN_WARNING
"cciss: read capacity failed\n");
2855 *block_size
= BLOCK_SIZE
;
2857 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2858 (unsigned long long)*total_size
+1, *block_size
);
2862 static int cciss_revalidate(struct gendisk
*disk
)
2864 ctlr_info_t
*h
= get_host(disk
);
2865 drive_info_struct
*drv
= get_drv(disk
);
2868 unsigned int block_size
;
2869 sector_t total_size
;
2870 InquiryData_struct
*inq_buff
= NULL
;
2872 for (logvol
= 0; logvol
< CISS_MAX_LUN
; logvol
++) {
2873 if (memcmp(h
->drv
[logvol
]->LunID
, drv
->LunID
,
2874 sizeof(drv
->LunID
)) == 0) {
2883 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
2884 if (inq_buff
== NULL
) {
2885 printk(KERN_WARNING
"cciss: out of memory\n");
2888 if (h
->cciss_read
== CCISS_READ_10
) {
2889 cciss_read_capacity(h
->ctlr
, logvol
,
2890 &total_size
, &block_size
);
2892 cciss_read_capacity_16(h
->ctlr
, logvol
,
2893 &total_size
, &block_size
);
2895 cciss_geometry_inquiry(h
->ctlr
, logvol
, total_size
, block_size
,
2898 blk_queue_logical_block_size(drv
->queue
, drv
->block_size
);
2899 set_capacity(disk
, drv
->nr_blocks
);
2906 * Map (physical) PCI mem into (virtual) kernel space
2908 static void __iomem
*remap_pci_mem(ulong base
, ulong size
)
2910 ulong page_base
= ((ulong
) base
) & PAGE_MASK
;
2911 ulong page_offs
= ((ulong
) base
) - page_base
;
2912 void __iomem
*page_remapped
= ioremap(page_base
, page_offs
+ size
);
2914 return page_remapped
? (page_remapped
+ page_offs
) : NULL
;
2918 * Takes jobs of the Q and sends them to the hardware, then puts it on
2919 * the Q to wait for completion.
2921 static void start_io(ctlr_info_t
*h
)
2923 CommandList_struct
*c
;
2925 while (!hlist_empty(&h
->reqQ
)) {
2926 c
= hlist_entry(h
->reqQ
.first
, CommandList_struct
, list
);
2927 /* can't do anything if fifo is full */
2928 if ((h
->access
.fifo_full(h
))) {
2929 printk(KERN_WARNING
"cciss: fifo full\n");
2933 /* Get the first entry from the Request Q */
2937 /* Tell the controller execute command */
2938 h
->access
.submit_command(h
, c
);
2940 /* Put job onto the completed Q */
2945 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2946 /* Zeros out the error record and then resends the command back */
2947 /* to the controller */
2948 static inline void resend_cciss_cmd(ctlr_info_t
*h
, CommandList_struct
*c
)
2950 /* erase the old error information */
2951 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2953 /* add it to software queue and then send it to the controller */
2956 if (h
->Qdepth
> h
->maxQsinceinit
)
2957 h
->maxQsinceinit
= h
->Qdepth
;
2962 static inline unsigned int make_status_bytes(unsigned int scsi_status_byte
,
2963 unsigned int msg_byte
, unsigned int host_byte
,
2964 unsigned int driver_byte
)
2966 /* inverse of macros in scsi.h */
2967 return (scsi_status_byte
& 0xff) |
2968 ((msg_byte
& 0xff) << 8) |
2969 ((host_byte
& 0xff) << 16) |
2970 ((driver_byte
& 0xff) << 24);
2973 static inline int evaluate_target_status(ctlr_info_t
*h
,
2974 CommandList_struct
*cmd
, int *retry_cmd
)
2976 unsigned char sense_key
;
2977 unsigned char status_byte
, msg_byte
, host_byte
, driver_byte
;
2981 /* If we get in here, it means we got "target status", that is, scsi status */
2982 status_byte
= cmd
->err_info
->ScsiStatus
;
2983 driver_byte
= DRIVER_OK
;
2984 msg_byte
= cmd
->err_info
->CommandStatus
; /* correct? seems too device specific */
2986 if (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
)
2987 host_byte
= DID_PASSTHROUGH
;
2991 error_value
= make_status_bytes(status_byte
, msg_byte
,
2992 host_byte
, driver_byte
);
2994 if (cmd
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
) {
2995 if (cmd
->rq
->cmd_type
!= REQ_TYPE_BLOCK_PC
)
2996 printk(KERN_WARNING
"cciss: cmd %p "
2997 "has SCSI Status 0x%x\n",
2998 cmd
, cmd
->err_info
->ScsiStatus
);
3002 /* check the sense key */
3003 sense_key
= 0xf & cmd
->err_info
->SenseInfo
[2];
3004 /* no status or recovered error */
3005 if (((sense_key
== 0x0) || (sense_key
== 0x1)) &&
3006 (cmd
->rq
->cmd_type
!= REQ_TYPE_BLOCK_PC
))
3009 if (check_for_unit_attention(h
, cmd
)) {
3010 *retry_cmd
= !(cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
);
3014 /* Not SG_IO or similar? */
3015 if (cmd
->rq
->cmd_type
!= REQ_TYPE_BLOCK_PC
) {
3016 if (error_value
!= 0)
3017 printk(KERN_WARNING
"cciss: cmd %p has CHECK CONDITION"
3018 " sense key = 0x%x\n", cmd
, sense_key
);
3022 /* SG_IO or similar, copy sense data back */
3023 if (cmd
->rq
->sense
) {
3024 if (cmd
->rq
->sense_len
> cmd
->err_info
->SenseLen
)
3025 cmd
->rq
->sense_len
= cmd
->err_info
->SenseLen
;
3026 memcpy(cmd
->rq
->sense
, cmd
->err_info
->SenseInfo
,
3027 cmd
->rq
->sense_len
);
3029 cmd
->rq
->sense_len
= 0;
3034 /* checks the status of the job and calls complete buffers to mark all
3035 * buffers for the completed job. Note that this function does not need
3036 * to hold the hba/queue lock.
3038 static inline void complete_command(ctlr_info_t
*h
, CommandList_struct
*cmd
,
3042 struct request
*rq
= cmd
->rq
;
3047 rq
->errors
= make_status_bytes(0, 0, 0, DRIVER_TIMEOUT
);
3049 if (cmd
->err_info
->CommandStatus
== 0) /* no error has occurred */
3050 goto after_error_processing
;
3052 switch (cmd
->err_info
->CommandStatus
) {
3053 case CMD_TARGET_STATUS
:
3054 rq
->errors
= evaluate_target_status(h
, cmd
, &retry_cmd
);
3056 case CMD_DATA_UNDERRUN
:
3057 if (cmd
->rq
->cmd_type
== REQ_TYPE_FS
) {
3058 printk(KERN_WARNING
"cciss: cmd %p has"
3059 " completed with data underrun "
3061 cmd
->rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
3064 case CMD_DATA_OVERRUN
:
3065 if (cmd
->rq
->cmd_type
== REQ_TYPE_FS
)
3066 printk(KERN_WARNING
"cciss: cmd %p has"
3067 " completed with data overrun "
3071 printk(KERN_WARNING
"cciss: cmd %p is "
3072 "reported invalid\n", cmd
);
3073 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3074 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3075 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3076 DID_PASSTHROUGH
: DID_ERROR
);
3078 case CMD_PROTOCOL_ERR
:
3079 printk(KERN_WARNING
"cciss: cmd %p has "
3080 "protocol error \n", cmd
);
3081 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3082 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3083 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3084 DID_PASSTHROUGH
: DID_ERROR
);
3086 case CMD_HARDWARE_ERR
:
3087 printk(KERN_WARNING
"cciss: cmd %p had "
3088 " hardware error\n", cmd
);
3089 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3090 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3091 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3092 DID_PASSTHROUGH
: DID_ERROR
);
3094 case CMD_CONNECTION_LOST
:
3095 printk(KERN_WARNING
"cciss: cmd %p had "
3096 "connection lost\n", cmd
);
3097 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3098 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3099 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3100 DID_PASSTHROUGH
: DID_ERROR
);
3103 printk(KERN_WARNING
"cciss: cmd %p was "
3105 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3106 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3107 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3108 DID_PASSTHROUGH
: DID_ABORT
);
3110 case CMD_ABORT_FAILED
:
3111 printk(KERN_WARNING
"cciss: cmd %p reports "
3112 "abort failed\n", cmd
);
3113 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3114 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3115 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3116 DID_PASSTHROUGH
: DID_ERROR
);
3118 case CMD_UNSOLICITED_ABORT
:
3119 printk(KERN_WARNING
"cciss%d: unsolicited "
3120 "abort %p\n", h
->ctlr
, cmd
);
3121 if (cmd
->retry_count
< MAX_CMD_RETRIES
) {
3124 "cciss%d: retrying %p\n", h
->ctlr
, cmd
);
3128 "cciss%d: %p retried too "
3129 "many times\n", h
->ctlr
, cmd
);
3130 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3131 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3132 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3133 DID_PASSTHROUGH
: DID_ABORT
);
3136 printk(KERN_WARNING
"cciss: cmd %p timedout\n", cmd
);
3137 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3138 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3139 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3140 DID_PASSTHROUGH
: DID_ERROR
);
3143 printk(KERN_WARNING
"cciss: cmd %p returned "
3144 "unknown status %x\n", cmd
,
3145 cmd
->err_info
->CommandStatus
);
3146 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3147 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3148 (cmd
->rq
->cmd_type
== REQ_TYPE_BLOCK_PC
) ?
3149 DID_PASSTHROUGH
: DID_ERROR
);
3152 after_error_processing
:
3154 /* We need to return this command */
3156 resend_cciss_cmd(h
, cmd
);
3159 cmd
->rq
->completion_data
= cmd
;
3160 blk_complete_request(cmd
->rq
);
3163 static inline u32
cciss_tag_contains_index(u32 tag
)
3165 #define DIRECT_LOOKUP_BIT 0x10
3166 return tag
& DIRECT_LOOKUP_BIT
;
3169 static inline u32
cciss_tag_to_index(u32 tag
)
3171 #define DIRECT_LOOKUP_SHIFT 5
3172 return tag
>> DIRECT_LOOKUP_SHIFT
;
3175 static inline u32
cciss_tag_discard_error_bits(u32 tag
)
3177 #define CCISS_ERROR_BITS 0x03
3178 return tag
& ~CCISS_ERROR_BITS
;
3181 static inline void cciss_mark_tag_indexed(u32
*tag
)
3183 *tag
|= DIRECT_LOOKUP_BIT
;
3186 static inline void cciss_set_tag_index(u32
*tag
, u32 index
)
3188 *tag
|= (index
<< DIRECT_LOOKUP_SHIFT
);
3192 * Get a request and submit it to the controller.
3194 static void do_cciss_request(struct request_queue
*q
)
3196 ctlr_info_t
*h
= q
->queuedata
;
3197 CommandList_struct
*c
;
3200 struct request
*creq
;
3202 struct scatterlist
*tmp_sg
;
3203 SGDescriptor_struct
*curr_sg
;
3204 drive_info_struct
*drv
;
3209 /* We call start_io here in case there is a command waiting on the
3210 * queue that has not been sent.
3212 if (blk_queue_plugged(q
))
3216 creq
= blk_peek_request(q
);
3220 BUG_ON(creq
->nr_phys_segments
> h
->maxsgentries
);
3222 if ((c
= cmd_alloc(h
, 1)) == NULL
)
3225 blk_start_request(creq
);
3227 tmp_sg
= h
->scatter_list
[c
->cmdindex
];
3228 spin_unlock_irq(q
->queue_lock
);
3230 c
->cmd_type
= CMD_RWREQ
;
3233 /* fill in the request */
3234 drv
= creq
->rq_disk
->private_data
;
3235 c
->Header
.ReplyQueue
= 0; /* unused in simple mode */
3236 /* got command from pool, so use the command block index instead */
3237 /* for direct lookups. */
3238 /* The first 2 bits are reserved for controller error reporting. */
3239 cciss_set_tag_index(&c
->Header
.Tag
.lower
, c
->cmdindex
);
3240 cciss_mark_tag_indexed(&c
->Header
.Tag
.lower
);
3241 memcpy(&c
->Header
.LUN
, drv
->LunID
, sizeof(drv
->LunID
));
3242 c
->Request
.CDBLen
= 10; /* 12 byte commands not in FW yet; */
3243 c
->Request
.Type
.Type
= TYPE_CMD
; /* It is a command. */
3244 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
3245 c
->Request
.Type
.Direction
=
3246 (rq_data_dir(creq
) == READ
) ? XFER_READ
: XFER_WRITE
;
3247 c
->Request
.Timeout
= 0; /* Don't time out */
3249 (rq_data_dir(creq
) == READ
) ? h
->cciss_read
: h
->cciss_write
;
3250 start_blk
= blk_rq_pos(creq
);
3252 printk(KERN_DEBUG
"ciss: sector =%d nr_sectors=%d\n",
3253 (int)blk_rq_pos(creq
), (int)blk_rq_sectors(creq
));
3254 #endif /* CCISS_DEBUG */
3256 sg_init_table(tmp_sg
, h
->maxsgentries
);
3257 seg
= blk_rq_map_sg(q
, creq
, tmp_sg
);
3259 /* get the DMA records for the setup */
3260 if (c
->Request
.Type
.Direction
== XFER_READ
)
3261 dir
= PCI_DMA_FROMDEVICE
;
3263 dir
= PCI_DMA_TODEVICE
;
3269 for (i
= 0; i
< seg
; i
++) {
3270 if (((sg_index
+1) == (h
->max_cmd_sgentries
)) &&
3271 !chained
&& ((seg
- i
) > 1)) {
3272 /* Point to next chain block. */
3273 curr_sg
= h
->cmd_sg_list
[c
->cmdindex
];
3277 curr_sg
[sg_index
].Len
= tmp_sg
[i
].length
;
3278 temp64
.val
= (__u64
) pci_map_page(h
->pdev
, sg_page(&tmp_sg
[i
]),
3280 tmp_sg
[i
].length
, dir
);
3281 curr_sg
[sg_index
].Addr
.lower
= temp64
.val32
.lower
;
3282 curr_sg
[sg_index
].Addr
.upper
= temp64
.val32
.upper
;
3283 curr_sg
[sg_index
].Ext
= 0; /* we are not chaining */
3287 cciss_map_sg_chain_block(h
, c
, h
->cmd_sg_list
[c
->cmdindex
],
3288 (seg
- (h
->max_cmd_sgentries
- 1)) *
3289 sizeof(SGDescriptor_struct
));
3291 /* track how many SG entries we are using */
3296 printk(KERN_DEBUG
"cciss: Submitting %ld sectors in %d segments "
3298 blk_rq_sectors(creq
), seg
, chained
);
3299 #endif /* CCISS_DEBUG */
3301 c
->Header
.SGTotal
= seg
+ chained
;
3302 if (seg
<= h
->max_cmd_sgentries
)
3303 c
->Header
.SGList
= c
->Header
.SGTotal
;
3305 c
->Header
.SGList
= h
->max_cmd_sgentries
;
3306 set_performant_mode(h
, c
);
3308 if (likely(creq
->cmd_type
== REQ_TYPE_FS
)) {
3309 if(h
->cciss_read
== CCISS_READ_10
) {
3310 c
->Request
.CDB
[1] = 0;
3311 c
->Request
.CDB
[2] = (start_blk
>> 24) & 0xff; /* MSB */
3312 c
->Request
.CDB
[3] = (start_blk
>> 16) & 0xff;
3313 c
->Request
.CDB
[4] = (start_blk
>> 8) & 0xff;
3314 c
->Request
.CDB
[5] = start_blk
& 0xff;
3315 c
->Request
.CDB
[6] = 0; /* (sect >> 24) & 0xff; MSB */
3316 c
->Request
.CDB
[7] = (blk_rq_sectors(creq
) >> 8) & 0xff;
3317 c
->Request
.CDB
[8] = blk_rq_sectors(creq
) & 0xff;
3318 c
->Request
.CDB
[9] = c
->Request
.CDB
[11] = c
->Request
.CDB
[12] = 0;
3320 u32 upper32
= upper_32_bits(start_blk
);
3322 c
->Request
.CDBLen
= 16;
3323 c
->Request
.CDB
[1]= 0;
3324 c
->Request
.CDB
[2]= (upper32
>> 24) & 0xff; /* MSB */
3325 c
->Request
.CDB
[3]= (upper32
>> 16) & 0xff;
3326 c
->Request
.CDB
[4]= (upper32
>> 8) & 0xff;
3327 c
->Request
.CDB
[5]= upper32
& 0xff;
3328 c
->Request
.CDB
[6]= (start_blk
>> 24) & 0xff;
3329 c
->Request
.CDB
[7]= (start_blk
>> 16) & 0xff;
3330 c
->Request
.CDB
[8]= (start_blk
>> 8) & 0xff;
3331 c
->Request
.CDB
[9]= start_blk
& 0xff;
3332 c
->Request
.CDB
[10]= (blk_rq_sectors(creq
) >> 24) & 0xff;
3333 c
->Request
.CDB
[11]= (blk_rq_sectors(creq
) >> 16) & 0xff;
3334 c
->Request
.CDB
[12]= (blk_rq_sectors(creq
) >> 8) & 0xff;
3335 c
->Request
.CDB
[13]= blk_rq_sectors(creq
) & 0xff;
3336 c
->Request
.CDB
[14] = c
->Request
.CDB
[15] = 0;
3338 } else if (creq
->cmd_type
== REQ_TYPE_BLOCK_PC
) {
3339 c
->Request
.CDBLen
= creq
->cmd_len
;
3340 memcpy(c
->Request
.CDB
, creq
->cmd
, BLK_MAX_CDB
);
3342 printk(KERN_WARNING
"cciss%d: bad request type %d\n", h
->ctlr
, creq
->cmd_type
);
3346 spin_lock_irq(q
->queue_lock
);
3350 if (h
->Qdepth
> h
->maxQsinceinit
)
3351 h
->maxQsinceinit
= h
->Qdepth
;
3357 /* We will already have the driver lock here so not need
3363 static inline unsigned long get_next_completion(ctlr_info_t
*h
)
3365 return h
->access
.command_completed(h
);
3368 static inline int interrupt_pending(ctlr_info_t
*h
)
3370 return h
->access
.intr_pending(h
);
3373 static inline long interrupt_not_for_us(ctlr_info_t
*h
)
3375 return !(h
->msi_vector
|| h
->msix_vector
) &&
3376 ((h
->access
.intr_pending(h
) == 0) ||
3377 (h
->interrupts_enabled
== 0));
3380 static inline int bad_tag(ctlr_info_t
*h
, u32 tag_index
,
3383 if (unlikely(tag_index
>= h
->nr_cmds
)) {
3384 dev_warn(&h
->pdev
->dev
, "bad tag 0x%08x ignored.\n", raw_tag
);
3390 static inline void finish_cmd(ctlr_info_t
*h
, CommandList_struct
*c
,
3394 if (likely(c
->cmd_type
== CMD_RWREQ
))
3395 complete_command(h
, c
, 0);
3396 else if (c
->cmd_type
== CMD_IOCTL_PEND
)
3397 complete(c
->waiting
);
3398 #ifdef CONFIG_CISS_SCSI_TAPE
3399 else if (c
->cmd_type
== CMD_SCSI
)
3400 complete_scsi_command(c
, 0, raw_tag
);
3404 static inline u32
next_command(ctlr_info_t
*h
)
3408 if (unlikely(h
->transMethod
!= CFGTBL_Trans_Performant
))
3409 return h
->access
.command_completed(h
);
3411 if ((*(h
->reply_pool_head
) & 1) == (h
->reply_pool_wraparound
)) {
3412 a
= *(h
->reply_pool_head
); /* Next cmd in ring buffer */
3413 (h
->reply_pool_head
)++;
3414 h
->commands_outstanding
--;
3418 /* Check for wraparound */
3419 if (h
->reply_pool_head
== (h
->reply_pool
+ h
->max_commands
)) {
3420 h
->reply_pool_head
= h
->reply_pool
;
3421 h
->reply_pool_wraparound
^= 1;
3426 /* process completion of an indexed ("direct lookup") command */
3427 static inline u32
process_indexed_cmd(ctlr_info_t
*h
, u32 raw_tag
)
3430 CommandList_struct
*c
;
3432 tag_index
= cciss_tag_to_index(raw_tag
);
3433 if (bad_tag(h
, tag_index
, raw_tag
))
3434 return next_command(h
);
3435 c
= h
->cmd_pool
+ tag_index
;
3436 finish_cmd(h
, c
, raw_tag
);
3437 return next_command(h
);
3440 /* process completion of a non-indexed command */
3441 static inline u32
process_nonindexed_cmd(ctlr_info_t
*h
, u32 raw_tag
)
3444 CommandList_struct
*c
= NULL
;
3445 struct hlist_node
*tmp
;
3446 __u32 busaddr_masked
, tag_masked
;
3448 tag
= cciss_tag_discard_error_bits(raw_tag
);
3449 hlist_for_each_entry(c
, tmp
, &h
->cmpQ
, list
) {
3450 busaddr_masked
= cciss_tag_discard_error_bits(c
->busaddr
);
3451 tag_masked
= cciss_tag_discard_error_bits(tag
);
3452 if (busaddr_masked
== tag_masked
) {
3453 finish_cmd(h
, c
, raw_tag
);
3454 return next_command(h
);
3457 bad_tag(h
, h
->nr_cmds
+ 1, raw_tag
);
3458 return next_command(h
);
3461 static irqreturn_t
do_cciss_intx(int irq
, void *dev_id
)
3463 ctlr_info_t
*h
= dev_id
;
3464 unsigned long flags
;
3467 if (interrupt_not_for_us(h
))
3470 * If there are completed commands in the completion queue,
3471 * we had better do something about it.
3473 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
3474 while (interrupt_pending(h
)) {
3475 raw_tag
= get_next_completion(h
);
3476 while (raw_tag
!= FIFO_EMPTY
) {
3477 if (cciss_tag_contains_index(raw_tag
))
3478 raw_tag
= process_indexed_cmd(h
, raw_tag
);
3480 raw_tag
= process_nonindexed_cmd(h
, raw_tag
);
3484 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
3488 /* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never
3489 * check the interrupt pending register because it is not set.
3491 static irqreturn_t
do_cciss_msix_intr(int irq
, void *dev_id
)
3493 ctlr_info_t
*h
= dev_id
;
3494 unsigned long flags
;
3497 if (interrupt_not_for_us(h
))
3500 * If there are completed commands in the completion queue,
3501 * we had better do something about it.
3503 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
3504 raw_tag
= get_next_completion(h
);
3505 while (raw_tag
!= FIFO_EMPTY
) {
3506 if (cciss_tag_contains_index(raw_tag
))
3507 raw_tag
= process_indexed_cmd(h
, raw_tag
);
3509 raw_tag
= process_nonindexed_cmd(h
, raw_tag
);
3512 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
3517 * add_to_scan_list() - add controller to rescan queue
3518 * @h: Pointer to the controller.
3520 * Adds the controller to the rescan queue if not already on the queue.
3522 * returns 1 if added to the queue, 0 if skipped (could be on the
3523 * queue already, or the controller could be initializing or shutting
3526 static int add_to_scan_list(struct ctlr_info
*h
)
3528 struct ctlr_info
*test_h
;
3532 if (h
->busy_initializing
)
3535 if (!mutex_trylock(&h
->busy_shutting_down
))
3538 mutex_lock(&scan_mutex
);
3539 list_for_each_entry(test_h
, &scan_q
, scan_list
) {
3545 if (!found
&& !h
->busy_scanning
) {
3546 INIT_COMPLETION(h
->scan_wait
);
3547 list_add_tail(&h
->scan_list
, &scan_q
);
3550 mutex_unlock(&scan_mutex
);
3551 mutex_unlock(&h
->busy_shutting_down
);
3557 * remove_from_scan_list() - remove controller from rescan queue
3558 * @h: Pointer to the controller.
3560 * Removes the controller from the rescan queue if present. Blocks if
3561 * the controller is currently conducting a rescan. The controller
3562 * can be in one of three states:
3563 * 1. Doesn't need a scan
3564 * 2. On the scan list, but not scanning yet (we remove it)
3565 * 3. Busy scanning (and not on the list). In this case we want to wait for
3566 * the scan to complete to make sure the scanning thread for this
3567 * controller is completely idle.
3569 static void remove_from_scan_list(struct ctlr_info
*h
)
3571 struct ctlr_info
*test_h
, *tmp_h
;
3573 mutex_lock(&scan_mutex
);
3574 list_for_each_entry_safe(test_h
, tmp_h
, &scan_q
, scan_list
) {
3575 if (test_h
== h
) { /* state 2. */
3576 list_del(&h
->scan_list
);
3577 complete_all(&h
->scan_wait
);
3578 mutex_unlock(&scan_mutex
);
3582 if (h
->busy_scanning
) { /* state 3. */
3583 mutex_unlock(&scan_mutex
);
3584 wait_for_completion(&h
->scan_wait
);
3585 } else { /* state 1, nothing to do. */
3586 mutex_unlock(&scan_mutex
);
3591 * scan_thread() - kernel thread used to rescan controllers
3594 * A kernel thread used scan for drive topology changes on
3595 * controllers. The thread processes only one controller at a time
3596 * using a queue. Controllers are added to the queue using
3597 * add_to_scan_list() and removed from the queue either after done
3598 * processing or using remove_from_scan_list().
3602 static int scan_thread(void *data
)
3604 struct ctlr_info
*h
;
3607 set_current_state(TASK_INTERRUPTIBLE
);
3609 if (kthread_should_stop())
3613 mutex_lock(&scan_mutex
);
3614 if (list_empty(&scan_q
)) {
3615 mutex_unlock(&scan_mutex
);
3619 h
= list_entry(scan_q
.next
,
3622 list_del(&h
->scan_list
);
3623 h
->busy_scanning
= 1;
3624 mutex_unlock(&scan_mutex
);
3626 rebuild_lun_table(h
, 0, 0);
3627 complete_all(&h
->scan_wait
);
3628 mutex_lock(&scan_mutex
);
3629 h
->busy_scanning
= 0;
3630 mutex_unlock(&scan_mutex
);
3637 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
)
3639 if (c
->err_info
->SenseInfo
[2] != UNIT_ATTENTION
)
3642 switch (c
->err_info
->SenseInfo
[12]) {
3644 printk(KERN_WARNING
"cciss%d: a state change "
3645 "detected, command retried\n", h
->ctlr
);
3649 printk(KERN_WARNING
"cciss%d: LUN failure "
3650 "detected, action required\n", h
->ctlr
);
3653 case REPORT_LUNS_CHANGED
:
3654 printk(KERN_WARNING
"cciss%d: report LUN data "
3655 "changed\n", h
->ctlr
);
3657 * Here, we could call add_to_scan_list and wake up the scan thread,
3658 * except that it's quite likely that we will get more than one
3659 * REPORT_LUNS_CHANGED condition in quick succession, which means
3660 * that those which occur after the first one will likely happen
3661 * *during* the scan_thread's rescan. And the rescan code is not
3662 * robust enough to restart in the middle, undoing what it has already
3663 * done, and it's not clear that it's even possible to do this, since
3664 * part of what it does is notify the block layer, which starts
3665 * doing it's own i/o to read partition tables and so on, and the
3666 * driver doesn't have visibility to know what might need undoing.
3667 * In any event, if possible, it is horribly complicated to get right
3668 * so we just don't do it for now.
3670 * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
3674 case POWER_OR_RESET
:
3675 printk(KERN_WARNING
"cciss%d: a power on "
3676 "or device reset detected\n", h
->ctlr
);
3679 case UNIT_ATTENTION_CLEARED
:
3680 printk(KERN_WARNING
"cciss%d: unit attention "
3681 "cleared by another initiator\n", h
->ctlr
);
3685 printk(KERN_WARNING
"cciss%d: unknown "
3686 "unit attention detected\n", h
->ctlr
);
3692 * We cannot read the structure directly, for portability we must use
3694 * This is for debug only.
3697 static void print_cfg_table(CfgTable_struct
*tb
)
3702 printk("Controller Configuration information\n");
3703 printk("------------------------------------\n");
3704 for (i
= 0; i
< 4; i
++)
3705 temp_name
[i
] = readb(&(tb
->Signature
[i
]));
3706 temp_name
[4] = '\0';
3707 printk(" Signature = %s\n", temp_name
);
3708 printk(" Spec Number = %d\n", readl(&(tb
->SpecValence
)));
3709 printk(" Transport methods supported = 0x%x\n",
3710 readl(&(tb
->TransportSupport
)));
3711 printk(" Transport methods active = 0x%x\n",
3712 readl(&(tb
->TransportActive
)));
3713 printk(" Requested transport Method = 0x%x\n",
3714 readl(&(tb
->HostWrite
.TransportRequest
)));
3715 printk(" Coalesce Interrupt Delay = 0x%x\n",
3716 readl(&(tb
->HostWrite
.CoalIntDelay
)));
3717 printk(" Coalesce Interrupt Count = 0x%x\n",
3718 readl(&(tb
->HostWrite
.CoalIntCount
)));
3719 printk(" Max outstanding commands = 0x%d\n",
3720 readl(&(tb
->CmdsOutMax
)));
3721 printk(" Bus Types = 0x%x\n", readl(&(tb
->BusTypes
)));
3722 for (i
= 0; i
< 16; i
++)
3723 temp_name
[i
] = readb(&(tb
->ServerName
[i
]));
3724 temp_name
[16] = '\0';
3725 printk(" Server Name = %s\n", temp_name
);
3726 printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb
->HeartBeat
)));
3728 #endif /* CCISS_DEBUG */
3730 static int find_PCI_BAR_index(struct pci_dev
*pdev
, unsigned long pci_bar_addr
)
3732 int i
, offset
, mem_type
, bar_type
;
3733 if (pci_bar_addr
== PCI_BASE_ADDRESS_0
) /* looking for BAR zero? */
3736 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3737 bar_type
= pci_resource_flags(pdev
, i
) & PCI_BASE_ADDRESS_SPACE
;
3738 if (bar_type
== PCI_BASE_ADDRESS_SPACE_IO
)
3741 mem_type
= pci_resource_flags(pdev
, i
) &
3742 PCI_BASE_ADDRESS_MEM_TYPE_MASK
;
3744 case PCI_BASE_ADDRESS_MEM_TYPE_32
:
3745 case PCI_BASE_ADDRESS_MEM_TYPE_1M
:
3746 offset
+= 4; /* 32 bit */
3748 case PCI_BASE_ADDRESS_MEM_TYPE_64
:
3751 default: /* reserved in PCI 2.2 */
3753 "Base address is invalid\n");
3758 if (offset
== pci_bar_addr
- PCI_BASE_ADDRESS_0
)
3764 /* Fill in bucket_map[], given nsgs (the max number of
3765 * scatter gather elements supported) and bucket[],
3766 * which is an array of 8 integers. The bucket[] array
3767 * contains 8 different DMA transfer sizes (in 16
3768 * byte increments) which the controller uses to fetch
3769 * commands. This function fills in bucket_map[], which
3770 * maps a given number of scatter gather elements to one of
3771 * the 8 DMA transfer sizes. The point of it is to allow the
3772 * controller to only do as much DMA as needed to fetch the
3773 * command, with the DMA transfer size encoded in the lower
3774 * bits of the command address.
3776 static void calc_bucket_map(int bucket
[], int num_buckets
,
3777 int nsgs
, int *bucket_map
)
3781 /* even a command with 0 SGs requires 4 blocks */
3782 #define MINIMUM_TRANSFER_BLOCKS 4
3783 #define NUM_BUCKETS 8
3784 /* Note, bucket_map must have nsgs+1 entries. */
3785 for (i
= 0; i
<= nsgs
; i
++) {
3786 /* Compute size of a command with i SG entries */
3787 size
= i
+ MINIMUM_TRANSFER_BLOCKS
;
3788 b
= num_buckets
; /* Assume the biggest bucket */
3789 /* Find the bucket that is just big enough */
3790 for (j
= 0; j
< 8; j
++) {
3791 if (bucket
[j
] >= size
) {
3796 /* for a command with i SG entries, use bucket b. */
3802 cciss_put_controller_into_performant_mode(ctlr_info_t
*h
)
3805 __u32 trans_support
;
3808 * 5 = 1 s/g entry or 4k
3809 * 6 = 2 s/g entry or 8k
3810 * 8 = 4 s/g entry or 16k
3811 * 10 = 6 s/g entry or 24k
3813 int bft
[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES
+ 4};
3814 unsigned long register_value
;
3816 BUILD_BUG_ON(28 > MAXSGENTRIES
+ 4);
3818 /* Attempt to put controller into performant mode if supported */
3819 /* Does board support performant mode? */
3820 trans_support
= readl(&(h
->cfgtable
->TransportSupport
));
3821 if (!(trans_support
& PERFORMANT_MODE
))
3824 printk(KERN_WARNING
"cciss%d: Placing controller into "
3825 "performant mode\n", h
->ctlr
);
3826 /* Performant mode demands commands on a 32 byte boundary
3827 * pci_alloc_consistent aligns on page boundarys already.
3828 * Just need to check if divisible by 32
3830 if ((sizeof(CommandList_struct
) % 32) != 0) {
3831 printk(KERN_WARNING
"%s %d %s\n",
3832 "cciss info: command size[",
3833 (int)sizeof(CommandList_struct
),
3834 "] not divisible by 32, no performant mode..\n");
3838 /* Performant mode ring buffer and supporting data structures */
3839 h
->reply_pool
= (__u64
*)pci_alloc_consistent(
3840 h
->pdev
, h
->max_commands
* sizeof(__u64
),
3841 &(h
->reply_pool_dhandle
));
3843 /* Need a block fetch table for performant mode */
3844 h
->blockFetchTable
= kmalloc(((h
->maxsgentries
+1) *
3845 sizeof(__u32
)), GFP_KERNEL
);
3847 if ((h
->reply_pool
== NULL
) || (h
->blockFetchTable
== NULL
))
3850 h
->reply_pool_wraparound
= 1; /* spec: init to 1 */
3852 /* Controller spec: zero out this buffer. */
3853 memset(h
->reply_pool
, 0, h
->max_commands
* sizeof(__u64
));
3854 h
->reply_pool_head
= h
->reply_pool
;
3856 trans_offset
= readl(&(h
->cfgtable
->TransMethodOffset
));
3857 calc_bucket_map(bft
, ARRAY_SIZE(bft
), h
->maxsgentries
,
3858 h
->blockFetchTable
);
3859 writel(bft
[0], &h
->transtable
->BlockFetch0
);
3860 writel(bft
[1], &h
->transtable
->BlockFetch1
);
3861 writel(bft
[2], &h
->transtable
->BlockFetch2
);
3862 writel(bft
[3], &h
->transtable
->BlockFetch3
);
3863 writel(bft
[4], &h
->transtable
->BlockFetch4
);
3864 writel(bft
[5], &h
->transtable
->BlockFetch5
);
3865 writel(bft
[6], &h
->transtable
->BlockFetch6
);
3866 writel(bft
[7], &h
->transtable
->BlockFetch7
);
3868 /* size of controller ring buffer */
3869 writel(h
->max_commands
, &h
->transtable
->RepQSize
);
3870 writel(1, &h
->transtable
->RepQCount
);
3871 writel(0, &h
->transtable
->RepQCtrAddrLow32
);
3872 writel(0, &h
->transtable
->RepQCtrAddrHigh32
);
3873 writel(h
->reply_pool_dhandle
, &h
->transtable
->RepQAddr0Low32
);
3874 writel(0, &h
->transtable
->RepQAddr0High32
);
3875 writel(CFGTBL_Trans_Performant
,
3876 &(h
->cfgtable
->HostWrite
.TransportRequest
));
3878 h
->transMethod
= CFGTBL_Trans_Performant
;
3879 writel(CFGTBL_ChangeReq
, h
->vaddr
+ SA5_DOORBELL
);
3880 /* under certain very rare conditions, this can take awhile.
3881 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3882 * as we enter this code.) */
3883 for (l
= 0; l
< MAX_CONFIG_WAIT
; l
++) {
3884 register_value
= readl(h
->vaddr
+ SA5_DOORBELL
);
3885 if (!(register_value
& CFGTBL_ChangeReq
))
3887 /* delay and try again */
3888 set_current_state(TASK_INTERRUPTIBLE
);
3889 schedule_timeout(10);
3891 register_value
= readl(&(h
->cfgtable
->TransportActive
));
3892 if (!(register_value
& CFGTBL_Trans_Performant
)) {
3893 printk(KERN_WARNING
"cciss: unable to get board into"
3894 " performant mode\n");
3898 /* Change the access methods to the performant access methods */
3899 h
->access
= SA5_performant_access
;
3903 kfree(h
->blockFetchTable
);
3905 pci_free_consistent(h
->pdev
,
3906 h
->max_commands
* sizeof(__u64
),
3908 h
->reply_pool_dhandle
);
3911 } /* cciss_put_controller_into_performant_mode */
3913 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
3914 * controllers that are capable. If not, we use IO-APIC mode.
3917 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*c
,
3918 struct pci_dev
*pdev
, __u32 board_id
)
3920 #ifdef CONFIG_PCI_MSI
3922 struct msix_entry cciss_msix_entries
[4] = { {0, 0}, {0, 1},
3926 /* Some boards advertise MSI but don't really support it */
3927 if ((board_id
== 0x40700E11) ||
3928 (board_id
== 0x40800E11) ||
3929 (board_id
== 0x40820E11) || (board_id
== 0x40830E11))
3930 goto default_int_mode
;
3932 if (pci_find_capability(pdev
, PCI_CAP_ID_MSIX
)) {
3933 err
= pci_enable_msix(pdev
, cciss_msix_entries
, 4);
3935 c
->intr
[0] = cciss_msix_entries
[0].vector
;
3936 c
->intr
[1] = cciss_msix_entries
[1].vector
;
3937 c
->intr
[2] = cciss_msix_entries
[2].vector
;
3938 c
->intr
[3] = cciss_msix_entries
[3].vector
;
3943 printk(KERN_WARNING
"cciss: only %d MSI-X vectors "
3944 "available\n", err
);
3945 goto default_int_mode
;
3947 printk(KERN_WARNING
"cciss: MSI-X init failed %d\n",
3949 goto default_int_mode
;
3952 if (pci_find_capability(pdev
, PCI_CAP_ID_MSI
)) {
3953 if (!pci_enable_msi(pdev
)) {
3956 printk(KERN_WARNING
"cciss: MSI init failed\n");
3960 #endif /* CONFIG_PCI_MSI */
3961 /* if we get here we're going to use the default interrupt mode */
3962 c
->intr
[PERF_MODE_INT
] = pdev
->irq
;
3966 static int __devinit
cciss_pci_init(ctlr_info_t
*c
, struct pci_dev
*pdev
)
3968 ushort subsystem_vendor_id
, subsystem_device_id
, command
;
3969 __u32 board_id
, scratchpad
= 0;
3971 __u32 cfg_base_addr
;
3972 __u64 cfg_base_addr_index
;
3973 int i
, prod_index
, err
;
3976 subsystem_vendor_id
= pdev
->subsystem_vendor
;
3977 subsystem_device_id
= pdev
->subsystem_device
;
3978 board_id
= (((__u32
) (subsystem_device_id
<< 16) & 0xffff0000) |
3979 subsystem_vendor_id
);
3981 for (i
= 0; i
< ARRAY_SIZE(products
); i
++) {
3982 /* Stand aside for hpsa driver on request */
3983 if (cciss_allow_hpsa
&& products
[i
].board_id
== HPSA_BOUNDARY
)
3985 if (board_id
== products
[i
].board_id
)
3989 if (prod_index
== ARRAY_SIZE(products
)) {
3990 dev_warn(&pdev
->dev
,
3991 "unrecognized board ID: 0x%08lx, ignoring.\n",
3992 (unsigned long) board_id
);
3996 /* check to see if controller has been disabled */
3997 /* BEFORE trying to enable it */
3998 (void)pci_read_config_word(pdev
, PCI_COMMAND
, &command
);
3999 if (!(command
& 0x02)) {
4001 "cciss: controller appears to be disabled\n");
4005 err
= pci_enable_device(pdev
);
4007 printk(KERN_ERR
"cciss: Unable to Enable PCI device\n");
4011 err
= pci_request_regions(pdev
, "cciss");
4013 printk(KERN_ERR
"cciss: Cannot obtain PCI resources, "
4019 printk("command = %x\n", command
);
4020 printk("irq = %x\n", pdev
->irq
);
4021 printk("board_id = %x\n", board_id
);
4022 #endif /* CCISS_DEBUG */
4024 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
4025 * else we use the IO-APIC interrupt assigned to us by system ROM.
4027 cciss_interrupt_mode(c
, pdev
, board_id
);
4029 /* find the memory BAR */
4030 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
4031 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
)
4034 if (i
== DEVICE_COUNT_RESOURCE
) {
4035 printk(KERN_WARNING
"cciss: No memory BAR found\n");
4037 goto err_out_free_res
;
4040 c
->paddr
= pci_resource_start(pdev
, i
); /* addressing mode bits
4045 printk("address 0 = %lx\n", c
->paddr
);
4046 #endif /* CCISS_DEBUG */
4047 c
->vaddr
= remap_pci_mem(c
->paddr
, 0x250);
4049 /* Wait for the board to become ready. (PCI hotplug needs this.)
4050 * We poll for up to 120 secs, once per 100ms. */
4051 for (i
= 0; i
< 1200; i
++) {
4052 scratchpad
= readl(c
->vaddr
+ SA5_SCRATCHPAD_OFFSET
);
4053 if (scratchpad
== CCISS_FIRMWARE_READY
)
4055 set_current_state(TASK_INTERRUPTIBLE
);
4056 schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
4058 if (scratchpad
!= CCISS_FIRMWARE_READY
) {
4059 printk(KERN_WARNING
"cciss: Board not ready. Timed out.\n");
4061 goto err_out_free_res
;
4064 /* get the address index number */
4065 cfg_base_addr
= readl(c
->vaddr
+ SA5_CTCFG_OFFSET
);
4066 cfg_base_addr
&= (__u32
) 0x0000ffff;
4068 printk("cfg base address = %x\n", cfg_base_addr
);
4069 #endif /* CCISS_DEBUG */
4070 cfg_base_addr_index
= find_PCI_BAR_index(pdev
, cfg_base_addr
);
4072 printk("cfg base address index = %llx\n",
4073 (unsigned long long)cfg_base_addr_index
);
4074 #endif /* CCISS_DEBUG */
4075 if (cfg_base_addr_index
== -1) {
4076 printk(KERN_WARNING
"cciss: Cannot find cfg_base_addr_index\n");
4078 goto err_out_free_res
;
4081 cfg_offset
= readl(c
->vaddr
+ SA5_CTMEM_OFFSET
);
4083 printk("cfg offset = %llx\n", (unsigned long long)cfg_offset
);
4084 #endif /* CCISS_DEBUG */
4085 c
->cfgtable
= remap_pci_mem(pci_resource_start(pdev
,
4086 cfg_base_addr_index
) +
4087 cfg_offset
, sizeof(CfgTable_struct
));
4088 /* Find performant mode table. */
4089 trans_offset
= readl(&(c
->cfgtable
->TransMethodOffset
));
4090 c
->transtable
= remap_pci_mem(pci_resource_start(pdev
,
4091 cfg_base_addr_index
) + cfg_offset
+trans_offset
,
4092 sizeof(*c
->transtable
));
4093 c
->board_id
= board_id
;
4096 print_cfg_table(c
->cfgtable
);
4097 #endif /* CCISS_DEBUG */
4099 /* Some controllers support Zero Memory Raid (ZMR).
4100 * When configured in ZMR mode the number of supported
4101 * commands drops to 64. So instead of just setting an
4102 * arbitrary value we make the driver a little smarter.
4103 * We read the config table to tell us how many commands
4104 * are supported on the controller then subtract 4 to
4105 * leave a little room for ioctl calls.
4107 c
->max_commands
= readl(&(c
->cfgtable
->MaxPerformantModeCommands
));
4108 c
->maxsgentries
= readl(&(c
->cfgtable
->MaxSGElements
));
4111 * Limit native command to 32 s/g elements to save dma'able memory.
4112 * Howvever spec says if 0, use 31
4115 c
->max_cmd_sgentries
= 31;
4116 if (c
->maxsgentries
> 512) {
4117 c
->max_cmd_sgentries
= 32;
4118 c
->chainsize
= c
->maxsgentries
- c
->max_cmd_sgentries
+ 1;
4119 c
->maxsgentries
-= 1; /* account for chain pointer */
4121 c
->maxsgentries
= 31; /* Default to traditional value */
4122 c
->chainsize
= 0; /* traditional */
4125 c
->product_name
= products
[prod_index
].product_name
;
4126 c
->access
= *(products
[prod_index
].access
);
4127 c
->nr_cmds
= c
->max_commands
- 4;
4128 if ((readb(&c
->cfgtable
->Signature
[0]) != 'C') ||
4129 (readb(&c
->cfgtable
->Signature
[1]) != 'I') ||
4130 (readb(&c
->cfgtable
->Signature
[2]) != 'S') ||
4131 (readb(&c
->cfgtable
->Signature
[3]) != 'S')) {
4132 printk("Does not appear to be a valid CISS config table\n");
4134 goto err_out_free_res
;
4138 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
4140 prefetch
= readl(&(c
->cfgtable
->SCSI_Prefetch
));
4142 writel(prefetch
, &(c
->cfgtable
->SCSI_Prefetch
));
4146 /* Disabling DMA prefetch and refetch for the P600.
4147 * An ASIC bug may result in accesses to invalid memory addresses.
4148 * We've disabled prefetch for some time now. Testing with XEN
4149 * kernels revealed a bug in the refetch if dom0 resides on a P600.
4151 if(board_id
== 0x3225103C) {
4154 dma_prefetch
= readl(c
->vaddr
+ I2O_DMA1_CFG
);
4155 dma_prefetch
|= 0x8000;
4156 writel(dma_prefetch
, c
->vaddr
+ I2O_DMA1_CFG
);
4157 pci_read_config_dword(pdev
, PCI_COMMAND_PARITY
, &dma_refetch
);
4159 pci_write_config_dword(pdev
, PCI_COMMAND_PARITY
, dma_refetch
);
4163 printk(KERN_WARNING
"Trying to put board into Performant mode\n");
4164 #endif /* CCISS_DEBUG */
4165 cciss_put_controller_into_performant_mode(c
);
4170 * Deliberately omit pci_disable_device(): it does something nasty to
4171 * Smart Array controllers that pci_enable_device does not undo
4173 pci_release_regions(pdev
);
4177 /* Function to find the first free pointer into our hba[] array
4178 * Returns -1 if no free entries are left.
4180 static int alloc_cciss_hba(void)
4184 for (i
= 0; i
< MAX_CTLR
; i
++) {
4188 p
= kzalloc(sizeof(ctlr_info_t
), GFP_KERNEL
);
4195 printk(KERN_WARNING
"cciss: This driver supports a maximum"
4196 " of %d controllers.\n", MAX_CTLR
);
4199 printk(KERN_ERR
"cciss: out of memory.\n");
4203 static void free_hba(int n
)
4205 ctlr_info_t
*h
= hba
[n
];
4209 for (i
= 0; i
< h
->highest_lun
+ 1; i
++)
4210 if (h
->gendisk
[i
] != NULL
)
4211 put_disk(h
->gendisk
[i
]);
4215 /* Send a message CDB to the firmware. */
4216 static __devinit
int cciss_message(struct pci_dev
*pdev
, unsigned char opcode
, unsigned char type
)
4219 CommandListHeader_struct CommandHeader
;
4220 RequestBlock_struct Request
;
4221 ErrDescriptor_struct ErrorDescriptor
;
4223 static const size_t cmd_sz
= sizeof(Command
) + sizeof(ErrorInfo_struct
);
4226 uint32_t paddr32
, tag
;
4227 void __iomem
*vaddr
;
4230 vaddr
= ioremap_nocache(pci_resource_start(pdev
, 0), pci_resource_len(pdev
, 0));
4234 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
4235 CCISS commands, so they must be allocated from the lower 4GiB of
4237 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
4243 cmd
= pci_alloc_consistent(pdev
, cmd_sz
, &paddr64
);
4249 /* This must fit, because of the 32-bit consistent DMA mask. Also,
4250 although there's no guarantee, we assume that the address is at
4251 least 4-byte aligned (most likely, it's page-aligned). */
4254 cmd
->CommandHeader
.ReplyQueue
= 0;
4255 cmd
->CommandHeader
.SGList
= 0;
4256 cmd
->CommandHeader
.SGTotal
= 0;
4257 cmd
->CommandHeader
.Tag
.lower
= paddr32
;
4258 cmd
->CommandHeader
.Tag
.upper
= 0;
4259 memset(&cmd
->CommandHeader
.LUN
.LunAddrBytes
, 0, 8);
4261 cmd
->Request
.CDBLen
= 16;
4262 cmd
->Request
.Type
.Type
= TYPE_MSG
;
4263 cmd
->Request
.Type
.Attribute
= ATTR_HEADOFQUEUE
;
4264 cmd
->Request
.Type
.Direction
= XFER_NONE
;
4265 cmd
->Request
.Timeout
= 0; /* Don't time out */
4266 cmd
->Request
.CDB
[0] = opcode
;
4267 cmd
->Request
.CDB
[1] = type
;
4268 memset(&cmd
->Request
.CDB
[2], 0, 14); /* the rest of the CDB is reserved */
4270 cmd
->ErrorDescriptor
.Addr
.lower
= paddr32
+ sizeof(Command
);
4271 cmd
->ErrorDescriptor
.Addr
.upper
= 0;
4272 cmd
->ErrorDescriptor
.Len
= sizeof(ErrorInfo_struct
);
4274 writel(paddr32
, vaddr
+ SA5_REQUEST_PORT_OFFSET
);
4276 for (i
= 0; i
< 10; i
++) {
4277 tag
= readl(vaddr
+ SA5_REPLY_PORT_OFFSET
);
4278 if ((tag
& ~3) == paddr32
)
4280 schedule_timeout_uninterruptible(HZ
);
4285 /* we leak the DMA buffer here ... no choice since the controller could
4286 still complete the command. */
4288 printk(KERN_ERR
"cciss: controller message %02x:%02x timed out\n",
4293 pci_free_consistent(pdev
, cmd_sz
, cmd
, paddr64
);
4296 printk(KERN_ERR
"cciss: controller message %02x:%02x failed\n",
4301 printk(KERN_INFO
"cciss: controller message %02x:%02x succeeded\n",
4306 #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
4307 #define cciss_noop(p) cciss_message(p, 3, 0)
4309 static __devinit
int cciss_reset_msi(struct pci_dev
*pdev
)
4311 /* the #defines are stolen from drivers/pci/msi.h. */
4312 #define msi_control_reg(base) (base + PCI_MSI_FLAGS)
4313 #define PCI_MSIX_FLAGS_ENABLE (1 << 15)
4318 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSI
);
4320 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
4321 if (control
& PCI_MSI_FLAGS_ENABLE
) {
4322 printk(KERN_INFO
"cciss: resetting MSI\n");
4323 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSI_FLAGS_ENABLE
);
4327 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
4329 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
4330 if (control
& PCI_MSIX_FLAGS_ENABLE
) {
4331 printk(KERN_INFO
"cciss: resetting MSI-X\n");
4332 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSIX_FLAGS_ENABLE
);
4339 /* This does a hard reset of the controller using PCI power management
4341 static __devinit
int cciss_hard_reset_controller(struct pci_dev
*pdev
)
4343 u16 pmcsr
, saved_config_space
[32];
4346 printk(KERN_INFO
"cciss: using PCI PM to reset controller\n");
4348 /* This is very nearly the same thing as
4350 pci_save_state(pci_dev);
4351 pci_set_power_state(pci_dev, PCI_D3hot);
4352 pci_set_power_state(pci_dev, PCI_D0);
4353 pci_restore_state(pci_dev);
4355 but we can't use these nice canned kernel routines on
4356 kexec, because they also check the MSI/MSI-X state in PCI
4357 configuration space and do the wrong thing when it is
4358 set/cleared. Also, the pci_save/restore_state functions
4359 violate the ordering requirements for restoring the
4360 configuration space from the CCISS document (see the
4361 comment below). So we roll our own .... */
4363 for (i
= 0; i
< 32; i
++)
4364 pci_read_config_word(pdev
, 2*i
, &saved_config_space
[i
]);
4366 pos
= pci_find_capability(pdev
, PCI_CAP_ID_PM
);
4368 printk(KERN_ERR
"cciss_reset_controller: PCI PM not supported\n");
4372 /* Quoting from the Open CISS Specification: "The Power
4373 * Management Control/Status Register (CSR) controls the power
4374 * state of the device. The normal operating state is D0,
4375 * CSR=00h. The software off state is D3, CSR=03h. To reset
4376 * the controller, place the interface device in D3 then to
4377 * D0, this causes a secondary PCI reset which will reset the
4380 /* enter the D3hot power management state */
4381 pci_read_config_word(pdev
, pos
+ PCI_PM_CTRL
, &pmcsr
);
4382 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
4384 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
4386 schedule_timeout_uninterruptible(HZ
>> 1);
4388 /* enter the D0 power management state */
4389 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
4391 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
4393 schedule_timeout_uninterruptible(HZ
>> 1);
4395 /* Restore the PCI configuration space. The Open CISS
4396 * Specification says, "Restore the PCI Configuration
4397 * Registers, offsets 00h through 60h. It is important to
4398 * restore the command register, 16-bits at offset 04h,
4399 * last. Do not restore the configuration status register,
4400 * 16-bits at offset 06h." Note that the offset is 2*i. */
4401 for (i
= 0; i
< 32; i
++) {
4402 if (i
== 2 || i
== 3)
4404 pci_write_config_word(pdev
, 2*i
, saved_config_space
[i
]);
4407 pci_write_config_word(pdev
, 4, saved_config_space
[2]);
4413 * This is it. Find all the controllers and register them. I really hate
4414 * stealing all these major device numbers.
4415 * returns the number of block devices registered.
4417 static int __devinit
cciss_init_one(struct pci_dev
*pdev
,
4418 const struct pci_device_id
*ent
)
4424 int dac
, return_code
;
4425 InquiryData_struct
*inq_buff
;
4427 if (reset_devices
) {
4428 /* Reset the controller with a PCI power-cycle */
4429 if (cciss_hard_reset_controller(pdev
) || cciss_reset_msi(pdev
))
4432 /* Now try to get the controller to respond to a no-op. Some
4433 devices (notably the HP Smart Array 5i Controller) need
4434 up to 30 seconds to respond. */
4435 for (i
=0; i
<30; i
++) {
4436 if (cciss_noop(pdev
) == 0)
4439 schedule_timeout_uninterruptible(HZ
);
4442 printk(KERN_ERR
"cciss: controller seems dead\n");
4447 i
= alloc_cciss_hba();
4450 hba
[i
]->busy_initializing
= 1;
4451 INIT_HLIST_HEAD(&hba
[i
]->cmpQ
);
4452 INIT_HLIST_HEAD(&hba
[i
]->reqQ
);
4453 mutex_init(&hba
[i
]->busy_shutting_down
);
4455 if (cciss_pci_init(hba
[i
], pdev
) != 0)
4456 goto clean_no_release_regions
;
4458 sprintf(hba
[i
]->devname
, "cciss%d", i
);
4460 hba
[i
]->pdev
= pdev
;
4462 init_completion(&hba
[i
]->scan_wait
);
4464 if (cciss_create_hba_sysfs_entry(hba
[i
]))
4467 /* configure PCI DMA stuff */
4468 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64)))
4470 else if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32)))
4473 printk(KERN_ERR
"cciss: no suitable DMA available\n");
4478 * register with the major number, or get a dynamic major number
4479 * by passing 0 as argument. This is done for greater than
4480 * 8 controller support.
4482 if (i
< MAX_CTLR_ORIG
)
4483 hba
[i
]->major
= COMPAQ_CISS_MAJOR
+ i
;
4484 rc
= register_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4485 if (rc
== -EBUSY
|| rc
== -EINVAL
) {
4487 "cciss: Unable to get major number %d for %s "
4488 "on hba %d\n", hba
[i
]->major
, hba
[i
]->devname
, i
);
4491 if (i
>= MAX_CTLR_ORIG
)
4495 /* make sure the board interrupts are off */
4496 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_OFF
);
4497 if (hba
[i
]->msi_vector
|| hba
[i
]->msix_vector
) {
4498 if (request_irq(hba
[i
]->intr
[PERF_MODE_INT
],
4500 IRQF_DISABLED
, hba
[i
]->devname
, hba
[i
])) {
4501 printk(KERN_ERR
"cciss: Unable to get irq %d for %s\n",
4502 hba
[i
]->intr
[PERF_MODE_INT
], hba
[i
]->devname
);
4506 if (request_irq(hba
[i
]->intr
[PERF_MODE_INT
], do_cciss_intx
,
4507 IRQF_DISABLED
, hba
[i
]->devname
, hba
[i
])) {
4508 printk(KERN_ERR
"cciss: Unable to get irq %d for %s\n",
4509 hba
[i
]->intr
[PERF_MODE_INT
], hba
[i
]->devname
);
4514 printk(KERN_INFO
"%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
4515 hba
[i
]->devname
, pdev
->device
, pci_name(pdev
),
4516 hba
[i
]->intr
[PERF_MODE_INT
], dac
? "" : " not");
4518 hba
[i
]->cmd_pool_bits
=
4519 kmalloc(DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4520 * sizeof(unsigned long), GFP_KERNEL
);
4521 hba
[i
]->cmd_pool
= (CommandList_struct
*)
4522 pci_alloc_consistent(hba
[i
]->pdev
,
4523 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4524 &(hba
[i
]->cmd_pool_dhandle
));
4525 hba
[i
]->errinfo_pool
= (ErrorInfo_struct
*)
4526 pci_alloc_consistent(hba
[i
]->pdev
,
4527 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4528 &(hba
[i
]->errinfo_pool_dhandle
));
4529 if ((hba
[i
]->cmd_pool_bits
== NULL
)
4530 || (hba
[i
]->cmd_pool
== NULL
)
4531 || (hba
[i
]->errinfo_pool
== NULL
)) {
4532 printk(KERN_ERR
"cciss: out of memory");
4536 /* Need space for temp scatter list */
4537 hba
[i
]->scatter_list
= kmalloc(hba
[i
]->max_commands
*
4538 sizeof(struct scatterlist
*),
4540 for (k
= 0; k
< hba
[i
]->nr_cmds
; k
++) {
4541 hba
[i
]->scatter_list
[k
] = kmalloc(sizeof(struct scatterlist
) *
4542 hba
[i
]->maxsgentries
,
4544 if (hba
[i
]->scatter_list
[k
] == NULL
) {
4545 printk(KERN_ERR
"cciss%d: could not allocate "
4550 hba
[i
]->cmd_sg_list
= cciss_allocate_sg_chain_blocks(hba
[i
],
4551 hba
[i
]->chainsize
, hba
[i
]->nr_cmds
);
4552 if (!hba
[i
]->cmd_sg_list
&& hba
[i
]->chainsize
> 0)
4555 spin_lock_init(&hba
[i
]->lock
);
4557 /* Initialize the pdev driver private data.
4558 have it point to hba[i]. */
4559 pci_set_drvdata(pdev
, hba
[i
]);
4560 /* command and error info recs zeroed out before
4562 memset(hba
[i
]->cmd_pool_bits
, 0,
4563 DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4564 * sizeof(unsigned long));
4566 hba
[i
]->num_luns
= 0;
4567 hba
[i
]->highest_lun
= -1;
4568 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4569 hba
[i
]->drv
[j
] = NULL
;
4570 hba
[i
]->gendisk
[j
] = NULL
;
4573 cciss_scsi_setup(i
);
4575 /* Turn the interrupts on so we can service requests */
4576 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_ON
);
4578 /* Get the firmware version */
4579 inq_buff
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
4580 if (inq_buff
== NULL
) {
4581 printk(KERN_ERR
"cciss: out of memory\n");
4585 return_code
= sendcmd_withirq(CISS_INQUIRY
, i
, inq_buff
,
4586 sizeof(InquiryData_struct
), 0, CTLR_LUNID
, TYPE_CMD
);
4587 if (return_code
== IO_OK
) {
4588 hba
[i
]->firm_ver
[0] = inq_buff
->data_byte
[32];
4589 hba
[i
]->firm_ver
[1] = inq_buff
->data_byte
[33];
4590 hba
[i
]->firm_ver
[2] = inq_buff
->data_byte
[34];
4591 hba
[i
]->firm_ver
[3] = inq_buff
->data_byte
[35];
4592 } else { /* send command failed */
4593 printk(KERN_WARNING
"cciss: unable to determine firmware"
4594 " version of controller\n");
4600 hba
[i
]->cciss_max_sectors
= 8192;
4602 rebuild_lun_table(hba
[i
], 1, 0);
4603 hba
[i
]->busy_initializing
= 0;
4607 kfree(hba
[i
]->cmd_pool_bits
);
4608 /* Free up sg elements */
4609 for (k
= 0; k
< hba
[i
]->nr_cmds
; k
++)
4610 kfree(hba
[i
]->scatter_list
[k
]);
4611 kfree(hba
[i
]->scatter_list
);
4612 cciss_free_sg_chain_blocks(hba
[i
]->cmd_sg_list
, hba
[i
]->nr_cmds
);
4613 if (hba
[i
]->cmd_pool
)
4614 pci_free_consistent(hba
[i
]->pdev
,
4615 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4616 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4617 if (hba
[i
]->errinfo_pool
)
4618 pci_free_consistent(hba
[i
]->pdev
,
4619 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4620 hba
[i
]->errinfo_pool
,
4621 hba
[i
]->errinfo_pool_dhandle
);
4622 free_irq(hba
[i
]->intr
[PERF_MODE_INT
], hba
[i
]);
4624 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4626 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4628 pci_release_regions(pdev
);
4629 clean_no_release_regions
:
4630 hba
[i
]->busy_initializing
= 0;
4633 * Deliberately omit pci_disable_device(): it does something nasty to
4634 * Smart Array controllers that pci_enable_device does not undo
4636 pci_set_drvdata(pdev
, NULL
);
4641 static void cciss_shutdown(struct pci_dev
*pdev
)
4647 h
= pci_get_drvdata(pdev
);
4648 flush_buf
= kzalloc(4, GFP_KERNEL
);
4651 "cciss:%d cache not flushed, out of memory.\n",
4655 /* write all data in the battery backed cache to disk */
4656 memset(flush_buf
, 0, 4);
4657 return_code
= sendcmd_withirq(CCISS_CACHE_FLUSH
, h
->ctlr
, flush_buf
,
4658 4, 0, CTLR_LUNID
, TYPE_CMD
);
4660 if (return_code
!= IO_OK
)
4661 printk(KERN_WARNING
"cciss%d: Error flushing cache\n",
4663 h
->access
.set_intr_mask(h
, CCISS_INTR_OFF
);
4664 free_irq(h
->intr
[PERF_MODE_INT
], h
);
4667 static void __devexit
cciss_remove_one(struct pci_dev
*pdev
)
4669 ctlr_info_t
*tmp_ptr
;
4672 if (pci_get_drvdata(pdev
) == NULL
) {
4673 printk(KERN_ERR
"cciss: Unable to remove device \n");
4677 tmp_ptr
= pci_get_drvdata(pdev
);
4679 if (hba
[i
] == NULL
) {
4680 printk(KERN_ERR
"cciss: device appears to "
4681 "already be removed \n");
4685 mutex_lock(&hba
[i
]->busy_shutting_down
);
4687 remove_from_scan_list(hba
[i
]);
4688 remove_proc_entry(hba
[i
]->devname
, proc_cciss
);
4689 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4691 /* remove it from the disk list */
4692 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4693 struct gendisk
*disk
= hba
[i
]->gendisk
[j
];
4695 struct request_queue
*q
= disk
->queue
;
4697 if (disk
->flags
& GENHD_FL_UP
) {
4698 cciss_destroy_ld_sysfs_entry(hba
[i
], j
, 1);
4702 blk_cleanup_queue(q
);
4706 #ifdef CONFIG_CISS_SCSI_TAPE
4707 cciss_unregister_scsi(i
); /* unhook from SCSI subsystem */
4710 cciss_shutdown(pdev
);
4712 #ifdef CONFIG_PCI_MSI
4713 if (hba
[i
]->msix_vector
)
4714 pci_disable_msix(hba
[i
]->pdev
);
4715 else if (hba
[i
]->msi_vector
)
4716 pci_disable_msi(hba
[i
]->pdev
);
4717 #endif /* CONFIG_PCI_MSI */
4719 iounmap(hba
[i
]->vaddr
);
4721 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4722 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4723 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4724 hba
[i
]->errinfo_pool
, hba
[i
]->errinfo_pool_dhandle
);
4725 kfree(hba
[i
]->cmd_pool_bits
);
4726 /* Free up sg elements */
4727 for (j
= 0; j
< hba
[i
]->nr_cmds
; j
++)
4728 kfree(hba
[i
]->scatter_list
[j
]);
4729 kfree(hba
[i
]->scatter_list
);
4730 cciss_free_sg_chain_blocks(hba
[i
]->cmd_sg_list
, hba
[i
]->nr_cmds
);
4732 * Deliberately omit pci_disable_device(): it does something nasty to
4733 * Smart Array controllers that pci_enable_device does not undo
4735 pci_release_regions(pdev
);
4736 pci_set_drvdata(pdev
, NULL
);
4737 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4738 mutex_unlock(&hba
[i
]->busy_shutting_down
);
4742 static struct pci_driver cciss_pci_driver
= {
4744 .probe
= cciss_init_one
,
4745 .remove
= __devexit_p(cciss_remove_one
),
4746 .id_table
= cciss_pci_device_id
, /* id_table */
4747 .shutdown
= cciss_shutdown
,
4751 * This is it. Register the PCI driver information for the cards we control
4752 * the OS will call our registered routines when it finds one of our cards.
4754 static int __init
cciss_init(void)
4759 * The hardware requires that commands are aligned on a 64-bit
4760 * boundary. Given that we use pci_alloc_consistent() to allocate an
4761 * array of them, the size must be a multiple of 8 bytes.
4763 BUILD_BUG_ON(sizeof(CommandList_struct
) % COMMANDLIST_ALIGNMENT
);
4764 printk(KERN_INFO DRIVER_NAME
"\n");
4766 err
= bus_register(&cciss_bus_type
);
4770 /* Start the scan thread */
4771 cciss_scan_thread
= kthread_run(scan_thread
, NULL
, "cciss_scan");
4772 if (IS_ERR(cciss_scan_thread
)) {
4773 err
= PTR_ERR(cciss_scan_thread
);
4774 goto err_bus_unregister
;
4777 /* Register for our PCI devices */
4778 err
= pci_register_driver(&cciss_pci_driver
);
4780 goto err_thread_stop
;
4785 kthread_stop(cciss_scan_thread
);
4787 bus_unregister(&cciss_bus_type
);
4792 static void __exit
cciss_cleanup(void)
4796 pci_unregister_driver(&cciss_pci_driver
);
4797 /* double check that all controller entrys have been removed */
4798 for (i
= 0; i
< MAX_CTLR
; i
++) {
4799 if (hba
[i
] != NULL
) {
4800 printk(KERN_WARNING
"cciss: had to remove"
4801 " controller %d\n", i
);
4802 cciss_remove_one(hba
[i
]->pdev
);
4805 kthread_stop(cciss_scan_thread
);
4806 remove_proc_entry("driver/cciss", NULL
);
4807 bus_unregister(&cciss_bus_type
);
4810 module_init(cciss_init
);
4811 module_exit(cciss_cleanup
);