2 * Disk Array driver for HP Smart Array controllers.
3 * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; version 2 of the License.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
23 #include <linux/module.h>
24 #include <linux/interrupt.h>
25 #include <linux/types.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/smp_lock.h>
30 #include <linux/delay.h>
31 #include <linux/major.h>
33 #include <linux/bio.h>
34 #include <linux/blkpg.h>
35 #include <linux/timer.h>
36 #include <linux/proc_fs.h>
37 #include <linux/seq_file.h>
38 #include <linux/init.h>
39 #include <linux/jiffies.h>
40 #include <linux/hdreg.h>
41 #include <linux/spinlock.h>
42 #include <linux/compat.h>
43 #include <linux/mutex.h>
44 #include <asm/uaccess.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/blkdev.h>
49 #include <linux/genhd.h>
50 #include <linux/completion.h>
51 #include <scsi/scsi.h>
53 #include <scsi/scsi_ioctl.h>
54 #include <linux/cdrom.h>
55 #include <linux/scatterlist.h>
56 #include <linux/kthread.h>
58 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
59 #define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
60 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
62 /* Embedded module documentation macros - see modules.h */
63 MODULE_AUTHOR("Hewlett-Packard Company");
64 MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
65 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
66 " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
67 " Smart Array G2 Series SAS/SATA Controllers");
68 MODULE_VERSION("3.6.20");
69 MODULE_LICENSE("GPL");
71 #include "cciss_cmd.h"
73 #include <linux/cciss_ioctl.h>
75 /* define the PCI info for the cards we can control */
76 static const struct pci_device_id cciss_pci_device_id
[] = {
77 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISS
, 0x0E11, 0x4070},
78 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4080},
79 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4082},
80 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4083},
81 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x4091},
82 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409A},
83 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409B},
84 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409C},
85 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409D},
86 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSA
, 0x103C, 0x3225},
87 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3223},
88 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3234},
89 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3235},
90 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3211},
91 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3212},
92 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3213},
93 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3214},
94 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3215},
95 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3237},
96 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x323D},
97 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3241},
98 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3243},
99 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3245},
100 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3247},
101 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x3249},
102 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324A},
103 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSE
, 0x103C, 0x324B},
104 {PCI_VENDOR_ID_HP
, PCI_ANY_ID
, PCI_ANY_ID
, PCI_ANY_ID
,
105 PCI_CLASS_STORAGE_RAID
<< 8, 0xffff << 8, 0},
109 MODULE_DEVICE_TABLE(pci
, cciss_pci_device_id
);
111 /* board_id = Subsystem Device ID & Vendor ID
112 * product = Marketing Name for the board
113 * access = Address of the struct of function pointers
115 static struct board_type products
[] = {
116 {0x40700E11, "Smart Array 5300", &SA5_access
},
117 {0x40800E11, "Smart Array 5i", &SA5B_access
},
118 {0x40820E11, "Smart Array 532", &SA5B_access
},
119 {0x40830E11, "Smart Array 5312", &SA5B_access
},
120 {0x409A0E11, "Smart Array 641", &SA5_access
},
121 {0x409B0E11, "Smart Array 642", &SA5_access
},
122 {0x409C0E11, "Smart Array 6400", &SA5_access
},
123 {0x409D0E11, "Smart Array 6400 EM", &SA5_access
},
124 {0x40910E11, "Smart Array 6i", &SA5_access
},
125 {0x3225103C, "Smart Array P600", &SA5_access
},
126 {0x3223103C, "Smart Array P800", &SA5_access
},
127 {0x3234103C, "Smart Array P400", &SA5_access
},
128 {0x3235103C, "Smart Array P400i", &SA5_access
},
129 {0x3211103C, "Smart Array E200i", &SA5_access
},
130 {0x3212103C, "Smart Array E200", &SA5_access
},
131 {0x3213103C, "Smart Array E200i", &SA5_access
},
132 {0x3214103C, "Smart Array E200i", &SA5_access
},
133 {0x3215103C, "Smart Array E200i", &SA5_access
},
134 {0x3237103C, "Smart Array E500", &SA5_access
},
135 {0x323D103C, "Smart Array P700m", &SA5_access
},
136 {0x3241103C, "Smart Array P212", &SA5_access
},
137 {0x3243103C, "Smart Array P410", &SA5_access
},
138 {0x3245103C, "Smart Array P410i", &SA5_access
},
139 {0x3247103C, "Smart Array P411", &SA5_access
},
140 {0x3249103C, "Smart Array P812", &SA5_access
},
141 {0x324A103C, "Smart Array P712m", &SA5_access
},
142 {0x324B103C, "Smart Array P711m", &SA5_access
},
143 {0xFFFF103C, "Unknown Smart Array", &SA5_access
},
146 /* How long to wait (in milliseconds) for board to go into simple mode */
147 #define MAX_CONFIG_WAIT 30000
148 #define MAX_IOCTL_CONFIG_WAIT 1000
150 /*define how many times we will try a command because of bus resets */
151 #define MAX_CMD_RETRIES 3
155 /* Originally cciss driver only supports 8 major numbers */
156 #define MAX_CTLR_ORIG 8
158 static ctlr_info_t
*hba
[MAX_CTLR
];
160 static struct task_struct
*cciss_scan_thread
;
161 static DEFINE_MUTEX(scan_mutex
);
162 static LIST_HEAD(scan_q
);
164 static void do_cciss_request(struct request_queue
*q
);
165 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
);
166 static int cciss_open(struct block_device
*bdev
, fmode_t mode
);
167 static int cciss_release(struct gendisk
*disk
, fmode_t mode
);
168 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
169 unsigned int cmd
, unsigned long arg
);
170 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
);
172 static int cciss_revalidate(struct gendisk
*disk
);
173 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
);
174 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
177 static void cciss_read_capacity(int ctlr
, int logvol
, int withirq
,
178 sector_t
*total_size
, unsigned int *block_size
);
179 static void cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
,
180 sector_t
*total_size
, unsigned int *block_size
);
181 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
182 int withirq
, sector_t total_size
,
183 unsigned int block_size
, InquiryData_struct
*inq_buff
,
184 drive_info_struct
*drv
);
185 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*, struct pci_dev
*,
187 static void start_io(ctlr_info_t
*h
);
188 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
189 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
);
190 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
191 __u8 page_code
, unsigned char scsi3addr
[],
193 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
195 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
);
197 static void fail_all_cmds(unsigned long ctlr
);
198 static int add_to_scan_list(struct ctlr_info
*h
);
199 static int scan_thread(void *data
);
200 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
);
202 #ifdef CONFIG_PROC_FS
203 static void cciss_procinit(int i
);
205 static void cciss_procinit(int i
)
208 #endif /* CONFIG_PROC_FS */
211 static int cciss_compat_ioctl(struct block_device
*, fmode_t
,
212 unsigned, unsigned long);
215 static const struct block_device_operations cciss_fops
= {
216 .owner
= THIS_MODULE
,
218 .release
= cciss_release
,
219 .locked_ioctl
= cciss_ioctl
,
220 .getgeo
= cciss_getgeo
,
222 .compat_ioctl
= cciss_compat_ioctl
,
224 .revalidate_disk
= cciss_revalidate
,
228 * Enqueuing and dequeuing functions for cmdlists.
230 static inline void addQ(struct hlist_head
*list
, CommandList_struct
*c
)
232 hlist_add_head(&c
->list
, list
);
235 static inline void removeQ(CommandList_struct
*c
)
238 * After kexec/dump some commands might still
239 * be in flight, which the firmware will try
240 * to complete. Resetting the firmware doesn't work
241 * with old fw revisions, so we have to mark
242 * them off as 'stale' to prevent the driver from
245 if (WARN_ON(hlist_unhashed(&c
->list
))) {
246 c
->cmd_type
= CMD_MSG_STALE
;
250 hlist_del_init(&c
->list
);
253 #include "cciss_scsi.c" /* For SCSI tape support */
255 #define RAID_UNKNOWN 6
257 #ifdef CONFIG_PROC_FS
260 * Report information about this controller.
262 #define ENG_GIG 1000000000
263 #define ENG_GIG_FACTOR (ENG_GIG/512)
264 #define ENGAGE_SCSI "engage scsi"
265 static const char *raid_label
[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
269 static struct proc_dir_entry
*proc_cciss
;
271 static void cciss_seq_show_header(struct seq_file
*seq
)
273 ctlr_info_t
*h
= seq
->private;
275 seq_printf(seq
, "%s: HP %s Controller\n"
276 "Board ID: 0x%08lx\n"
277 "Firmware Version: %c%c%c%c\n"
279 "Logical drives: %d\n"
280 "Current Q depth: %d\n"
281 "Current # commands on controller: %d\n"
282 "Max Q depth since init: %d\n"
283 "Max # commands on controller since init: %d\n"
284 "Max SG entries since init: %d\n",
287 (unsigned long)h
->board_id
,
288 h
->firm_ver
[0], h
->firm_ver
[1], h
->firm_ver
[2],
289 h
->firm_ver
[3], (unsigned int)h
->intr
[SIMPLE_MODE_INT
],
291 h
->Qdepth
, h
->commands_outstanding
,
292 h
->maxQsinceinit
, h
->max_outstanding
, h
->maxSG
);
294 #ifdef CONFIG_CISS_SCSI_TAPE
295 cciss_seq_tape_report(seq
, h
->ctlr
);
296 #endif /* CONFIG_CISS_SCSI_TAPE */
299 static void *cciss_seq_start(struct seq_file
*seq
, loff_t
*pos
)
301 ctlr_info_t
*h
= seq
->private;
302 unsigned ctlr
= h
->ctlr
;
305 /* prevent displaying bogus info during configuration
306 * or deconfiguration of a logical volume
308 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
309 if (h
->busy_configuring
) {
310 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
311 return ERR_PTR(-EBUSY
);
313 h
->busy_configuring
= 1;
314 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
317 cciss_seq_show_header(seq
);
322 static int cciss_seq_show(struct seq_file
*seq
, void *v
)
324 sector_t vol_sz
, vol_sz_frac
;
325 ctlr_info_t
*h
= seq
->private;
326 unsigned ctlr
= h
->ctlr
;
328 drive_info_struct
*drv
= &h
->drv
[*pos
];
330 if (*pos
> h
->highest_lun
)
336 vol_sz
= drv
->nr_blocks
;
337 vol_sz_frac
= sector_div(vol_sz
, ENG_GIG_FACTOR
);
339 sector_div(vol_sz_frac
, ENG_GIG_FACTOR
);
341 if (drv
->raid_level
> 5)
342 drv
->raid_level
= RAID_UNKNOWN
;
343 seq_printf(seq
, "cciss/c%dd%d:"
344 "\t%4u.%02uGB\tRAID %s\n",
345 ctlr
, (int) *pos
, (int)vol_sz
, (int)vol_sz_frac
,
346 raid_label
[drv
->raid_level
]);
350 static void *cciss_seq_next(struct seq_file
*seq
, void *v
, loff_t
*pos
)
352 ctlr_info_t
*h
= seq
->private;
354 if (*pos
> h
->highest_lun
)
361 static void cciss_seq_stop(struct seq_file
*seq
, void *v
)
363 ctlr_info_t
*h
= seq
->private;
365 /* Only reset h->busy_configuring if we succeeded in setting
366 * it during cciss_seq_start. */
367 if (v
== ERR_PTR(-EBUSY
))
370 h
->busy_configuring
= 0;
373 static const struct seq_operations cciss_seq_ops
= {
374 .start
= cciss_seq_start
,
375 .show
= cciss_seq_show
,
376 .next
= cciss_seq_next
,
377 .stop
= cciss_seq_stop
,
380 static int cciss_seq_open(struct inode
*inode
, struct file
*file
)
382 int ret
= seq_open(file
, &cciss_seq_ops
);
383 struct seq_file
*seq
= file
->private_data
;
386 seq
->private = PDE(inode
)->data
;
392 cciss_proc_write(struct file
*file
, const char __user
*buf
,
393 size_t length
, loff_t
*ppos
)
398 #ifndef CONFIG_CISS_SCSI_TAPE
402 if (!buf
|| length
> PAGE_SIZE
- 1)
405 buffer
= (char *)__get_free_page(GFP_KERNEL
);
410 if (copy_from_user(buffer
, buf
, length
))
412 buffer
[length
] = '\0';
414 #ifdef CONFIG_CISS_SCSI_TAPE
415 if (strncmp(ENGAGE_SCSI
, buffer
, sizeof ENGAGE_SCSI
- 1) == 0) {
416 struct seq_file
*seq
= file
->private_data
;
417 ctlr_info_t
*h
= seq
->private;
420 rc
= cciss_engage_scsi(h
->ctlr
);
426 #endif /* CONFIG_CISS_SCSI_TAPE */
428 /* might be nice to have "disengage" too, but it's not
429 safely possible. (only 1 module use count, lock issues.) */
432 free_page((unsigned long)buffer
);
436 static struct file_operations cciss_proc_fops
= {
437 .owner
= THIS_MODULE
,
438 .open
= cciss_seq_open
,
441 .release
= seq_release
,
442 .write
= cciss_proc_write
,
445 static void __devinit
cciss_procinit(int i
)
447 struct proc_dir_entry
*pde
;
449 if (proc_cciss
== NULL
)
450 proc_cciss
= proc_mkdir("driver/cciss", NULL
);
453 pde
= proc_create_data(hba
[i
]->devname
, S_IWUSR
| S_IRUSR
| S_IRGRP
|
455 &cciss_proc_fops
, hba
[i
]);
457 #endif /* CONFIG_PROC_FS */
459 #define MAX_PRODUCT_NAME_LEN 19
461 #define to_hba(n) container_of(n, struct ctlr_info, dev)
462 #define to_drv(n) container_of(n, drive_info_struct, dev)
464 static ssize_t
host_store_rescan(struct device
*dev
,
465 struct device_attribute
*attr
,
466 const char *buf
, size_t count
)
468 struct ctlr_info
*h
= to_hba(dev
);
471 wake_up_process(cciss_scan_thread
);
472 wait_for_completion_interruptible(&h
->scan_wait
);
476 DEVICE_ATTR(rescan
, S_IWUSR
, NULL
, host_store_rescan
);
478 static ssize_t
dev_show_unique_id(struct device
*dev
,
479 struct device_attribute
*attr
,
482 drive_info_struct
*drv
= to_drv(dev
);
483 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
488 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
489 if (h
->busy_configuring
)
492 memcpy(sn
, drv
->serial_no
, sizeof(sn
));
493 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
498 return snprintf(buf
, 16 * 2 + 2,
499 "%02X%02X%02X%02X%02X%02X%02X%02X"
500 "%02X%02X%02X%02X%02X%02X%02X%02X\n",
501 sn
[0], sn
[1], sn
[2], sn
[3],
502 sn
[4], sn
[5], sn
[6], sn
[7],
503 sn
[8], sn
[9], sn
[10], sn
[11],
504 sn
[12], sn
[13], sn
[14], sn
[15]);
506 DEVICE_ATTR(unique_id
, S_IRUGO
, dev_show_unique_id
, NULL
);
508 static ssize_t
dev_show_vendor(struct device
*dev
,
509 struct device_attribute
*attr
,
512 drive_info_struct
*drv
= to_drv(dev
);
513 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
514 char vendor
[VENDOR_LEN
+ 1];
518 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
519 if (h
->busy_configuring
)
522 memcpy(vendor
, drv
->vendor
, VENDOR_LEN
+ 1);
523 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
528 return snprintf(buf
, sizeof(vendor
) + 1, "%s\n", drv
->vendor
);
530 DEVICE_ATTR(vendor
, S_IRUGO
, dev_show_vendor
, NULL
);
532 static ssize_t
dev_show_model(struct device
*dev
,
533 struct device_attribute
*attr
,
536 drive_info_struct
*drv
= to_drv(dev
);
537 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
538 char model
[MODEL_LEN
+ 1];
542 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
543 if (h
->busy_configuring
)
546 memcpy(model
, drv
->model
, MODEL_LEN
+ 1);
547 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
552 return snprintf(buf
, sizeof(model
) + 1, "%s\n", drv
->model
);
554 DEVICE_ATTR(model
, S_IRUGO
, dev_show_model
, NULL
);
556 static ssize_t
dev_show_rev(struct device
*dev
,
557 struct device_attribute
*attr
,
560 drive_info_struct
*drv
= to_drv(dev
);
561 struct ctlr_info
*h
= to_hba(drv
->dev
.parent
);
562 char rev
[REV_LEN
+ 1];
566 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
567 if (h
->busy_configuring
)
570 memcpy(rev
, drv
->rev
, REV_LEN
+ 1);
571 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
576 return snprintf(buf
, sizeof(rev
) + 1, "%s\n", drv
->rev
);
578 DEVICE_ATTR(rev
, S_IRUGO
, dev_show_rev
, NULL
);
580 static struct attribute
*cciss_host_attrs
[] = {
581 &dev_attr_rescan
.attr
,
585 static struct attribute_group cciss_host_attr_group
= {
586 .attrs
= cciss_host_attrs
,
589 static struct attribute_group
*cciss_host_attr_groups
[] = {
590 &cciss_host_attr_group
,
594 static struct device_type cciss_host_type
= {
595 .name
= "cciss_host",
596 .groups
= cciss_host_attr_groups
,
599 static struct attribute
*cciss_dev_attrs
[] = {
600 &dev_attr_unique_id
.attr
,
601 &dev_attr_model
.attr
,
602 &dev_attr_vendor
.attr
,
607 static struct attribute_group cciss_dev_attr_group
= {
608 .attrs
= cciss_dev_attrs
,
611 static const struct attribute_group
*cciss_dev_attr_groups
[] = {
612 &cciss_dev_attr_group
,
616 static struct device_type cciss_dev_type
= {
617 .name
= "cciss_device",
618 .groups
= cciss_dev_attr_groups
,
621 static struct bus_type cciss_bus_type
= {
627 * Initialize sysfs entry for each controller. This sets up and registers
628 * the 'cciss#' directory for each individual controller under
629 * /sys/bus/pci/devices/<dev>/.
631 static int cciss_create_hba_sysfs_entry(struct ctlr_info
*h
)
633 device_initialize(&h
->dev
);
634 h
->dev
.type
= &cciss_host_type
;
635 h
->dev
.bus
= &cciss_bus_type
;
636 dev_set_name(&h
->dev
, "%s", h
->devname
);
637 h
->dev
.parent
= &h
->pdev
->dev
;
639 return device_add(&h
->dev
);
643 * Remove sysfs entries for an hba.
645 static void cciss_destroy_hba_sysfs_entry(struct ctlr_info
*h
)
651 * Initialize sysfs for each logical drive. This sets up and registers
652 * the 'c#d#' directory for each individual logical drive under
653 * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
654 * /sys/block/cciss!c#d# to this entry.
656 static int cciss_create_ld_sysfs_entry(struct ctlr_info
*h
,
657 drive_info_struct
*drv
,
660 device_initialize(&drv
->dev
);
661 drv
->dev
.type
= &cciss_dev_type
;
662 drv
->dev
.bus
= &cciss_bus_type
;
663 dev_set_name(&drv
->dev
, "c%dd%d", h
->ctlr
, drv_index
);
664 drv
->dev
.parent
= &h
->dev
;
665 return device_add(&drv
->dev
);
669 * Remove sysfs entries for a logical drive.
671 static void cciss_destroy_ld_sysfs_entry(drive_info_struct
*drv
)
673 device_del(&drv
->dev
);
677 * For operations that cannot sleep, a command block is allocated at init,
678 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
679 * which ones are free or in use. For operations that can wait for kmalloc
680 * to possible sleep, this routine can be called with get_from_pool set to 0.
681 * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
683 static CommandList_struct
*cmd_alloc(ctlr_info_t
*h
, int get_from_pool
)
685 CommandList_struct
*c
;
688 dma_addr_t cmd_dma_handle
, err_dma_handle
;
690 if (!get_from_pool
) {
691 c
= (CommandList_struct
*) pci_alloc_consistent(h
->pdev
,
692 sizeof(CommandList_struct
), &cmd_dma_handle
);
695 memset(c
, 0, sizeof(CommandList_struct
));
699 c
->err_info
= (ErrorInfo_struct
*)
700 pci_alloc_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
703 if (c
->err_info
== NULL
) {
704 pci_free_consistent(h
->pdev
,
705 sizeof(CommandList_struct
), c
, cmd_dma_handle
);
708 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
709 } else { /* get it out of the controllers pool */
712 i
= find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
);
715 } while (test_and_set_bit
716 (i
& (BITS_PER_LONG
- 1),
717 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
)) != 0);
719 printk(KERN_DEBUG
"cciss: using command buffer %d\n", i
);
722 memset(c
, 0, sizeof(CommandList_struct
));
723 cmd_dma_handle
= h
->cmd_pool_dhandle
724 + i
* sizeof(CommandList_struct
);
725 c
->err_info
= h
->errinfo_pool
+ i
;
726 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
727 err_dma_handle
= h
->errinfo_pool_dhandle
728 + i
* sizeof(ErrorInfo_struct
);
734 INIT_HLIST_NODE(&c
->list
);
735 c
->busaddr
= (__u32
) cmd_dma_handle
;
736 temp64
.val
= (__u64
) err_dma_handle
;
737 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
738 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
739 c
->ErrDesc
.Len
= sizeof(ErrorInfo_struct
);
746 * Frees a command block that was previously allocated with cmd_alloc().
748 static void cmd_free(ctlr_info_t
*h
, CommandList_struct
*c
, int got_from_pool
)
753 if (!got_from_pool
) {
754 temp64
.val32
.lower
= c
->ErrDesc
.Addr
.lower
;
755 temp64
.val32
.upper
= c
->ErrDesc
.Addr
.upper
;
756 pci_free_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
757 c
->err_info
, (dma_addr_t
) temp64
.val
);
758 pci_free_consistent(h
->pdev
, sizeof(CommandList_struct
),
759 c
, (dma_addr_t
) c
->busaddr
);
762 clear_bit(i
& (BITS_PER_LONG
- 1),
763 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
));
768 static inline ctlr_info_t
*get_host(struct gendisk
*disk
)
770 return disk
->queue
->queuedata
;
773 static inline drive_info_struct
*get_drv(struct gendisk
*disk
)
775 return disk
->private_data
;
779 * Open. Make sure the device is really there.
781 static int cciss_open(struct block_device
*bdev
, fmode_t mode
)
783 ctlr_info_t
*host
= get_host(bdev
->bd_disk
);
784 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
787 printk(KERN_DEBUG
"cciss_open %s\n", bdev
->bd_disk
->disk_name
);
788 #endif /* CCISS_DEBUG */
790 if (host
->busy_initializing
|| drv
->busy_configuring
)
793 * Root is allowed to open raw volume zero even if it's not configured
794 * so array config can still work. Root is also allowed to open any
795 * volume that has a LUN ID, so it can issue IOCTL to reread the
796 * disk information. I don't think I really like this
797 * but I'm already using way to many device nodes to claim another one
798 * for "raw controller".
800 if (drv
->heads
== 0) {
801 if (MINOR(bdev
->bd_dev
) != 0) { /* not node 0? */
802 /* if not node 0 make sure it is a partition = 0 */
803 if (MINOR(bdev
->bd_dev
) & 0x0f) {
805 /* if it is, make sure we have a LUN ID */
806 } else if (drv
->LunID
== 0) {
810 if (!capable(CAP_SYS_ADMIN
))
821 static int cciss_release(struct gendisk
*disk
, fmode_t mode
)
823 ctlr_info_t
*host
= get_host(disk
);
824 drive_info_struct
*drv
= get_drv(disk
);
827 printk(KERN_DEBUG
"cciss_release %s\n", disk
->disk_name
);
828 #endif /* CCISS_DEBUG */
837 static int do_ioctl(struct block_device
*bdev
, fmode_t mode
,
838 unsigned cmd
, unsigned long arg
)
842 ret
= cciss_ioctl(bdev
, mode
, cmd
, arg
);
847 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
848 unsigned cmd
, unsigned long arg
);
849 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
850 unsigned cmd
, unsigned long arg
);
852 static int cciss_compat_ioctl(struct block_device
*bdev
, fmode_t mode
,
853 unsigned cmd
, unsigned long arg
)
856 case CCISS_GETPCIINFO
:
857 case CCISS_GETINTINFO
:
858 case CCISS_SETINTINFO
:
859 case CCISS_GETNODENAME
:
860 case CCISS_SETNODENAME
:
861 case CCISS_GETHEARTBEAT
:
862 case CCISS_GETBUSTYPES
:
863 case CCISS_GETFIRMVER
:
864 case CCISS_GETDRIVVER
:
865 case CCISS_REVALIDVOLS
:
866 case CCISS_DEREGDISK
:
867 case CCISS_REGNEWDISK
:
869 case CCISS_RESCANDISK
:
870 case CCISS_GETLUNINFO
:
871 return do_ioctl(bdev
, mode
, cmd
, arg
);
873 case CCISS_PASSTHRU32
:
874 return cciss_ioctl32_passthru(bdev
, mode
, cmd
, arg
);
875 case CCISS_BIG_PASSTHRU32
:
876 return cciss_ioctl32_big_passthru(bdev
, mode
, cmd
, arg
);
883 static int cciss_ioctl32_passthru(struct block_device
*bdev
, fmode_t mode
,
884 unsigned cmd
, unsigned long arg
)
886 IOCTL32_Command_struct __user
*arg32
=
887 (IOCTL32_Command_struct __user
*) arg
;
888 IOCTL_Command_struct arg64
;
889 IOCTL_Command_struct __user
*p
= compat_alloc_user_space(sizeof(arg64
));
895 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
896 sizeof(arg64
.LUN_info
));
898 copy_from_user(&arg64
.Request
, &arg32
->Request
,
899 sizeof(arg64
.Request
));
901 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
902 sizeof(arg64
.error_info
));
903 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
904 err
|= get_user(cp
, &arg32
->buf
);
905 arg64
.buf
= compat_ptr(cp
);
906 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
911 err
= do_ioctl(bdev
, mode
, CCISS_PASSTHRU
, (unsigned long)p
);
915 copy_in_user(&arg32
->error_info
, &p
->error_info
,
916 sizeof(arg32
->error_info
));
922 static int cciss_ioctl32_big_passthru(struct block_device
*bdev
, fmode_t mode
,
923 unsigned cmd
, unsigned long arg
)
925 BIG_IOCTL32_Command_struct __user
*arg32
=
926 (BIG_IOCTL32_Command_struct __user
*) arg
;
927 BIG_IOCTL_Command_struct arg64
;
928 BIG_IOCTL_Command_struct __user
*p
=
929 compat_alloc_user_space(sizeof(arg64
));
935 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
936 sizeof(arg64
.LUN_info
));
938 copy_from_user(&arg64
.Request
, &arg32
->Request
,
939 sizeof(arg64
.Request
));
941 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
942 sizeof(arg64
.error_info
));
943 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
944 err
|= get_user(arg64
.malloc_size
, &arg32
->malloc_size
);
945 err
|= get_user(cp
, &arg32
->buf
);
946 arg64
.buf
= compat_ptr(cp
);
947 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
952 err
= do_ioctl(bdev
, mode
, CCISS_BIG_PASSTHRU
, (unsigned long)p
);
956 copy_in_user(&arg32
->error_info
, &p
->error_info
,
957 sizeof(arg32
->error_info
));
964 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
966 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
971 geo
->heads
= drv
->heads
;
972 geo
->sectors
= drv
->sectors
;
973 geo
->cylinders
= drv
->cylinders
;
977 static void check_ioctl_unit_attention(ctlr_info_t
*host
, CommandList_struct
*c
)
979 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
&&
980 c
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
)
981 (void)check_for_unit_attention(host
, c
);
986 static int cciss_ioctl(struct block_device
*bdev
, fmode_t mode
,
987 unsigned int cmd
, unsigned long arg
)
989 struct gendisk
*disk
= bdev
->bd_disk
;
990 ctlr_info_t
*host
= get_host(disk
);
991 drive_info_struct
*drv
= get_drv(disk
);
992 int ctlr
= host
->ctlr
;
993 void __user
*argp
= (void __user
*)arg
;
996 printk(KERN_DEBUG
"cciss_ioctl: Called with cmd=%x %lx\n", cmd
, arg
);
997 #endif /* CCISS_DEBUG */
1000 case CCISS_GETPCIINFO
:
1002 cciss_pci_info_struct pciinfo
;
1006 pciinfo
.domain
= pci_domain_nr(host
->pdev
->bus
);
1007 pciinfo
.bus
= host
->pdev
->bus
->number
;
1008 pciinfo
.dev_fn
= host
->pdev
->devfn
;
1009 pciinfo
.board_id
= host
->board_id
;
1011 (argp
, &pciinfo
, sizeof(cciss_pci_info_struct
)))
1015 case CCISS_GETINTINFO
:
1017 cciss_coalint_struct intinfo
;
1021 readl(&host
->cfgtable
->HostWrite
.CoalIntDelay
);
1023 readl(&host
->cfgtable
->HostWrite
.CoalIntCount
);
1025 (argp
, &intinfo
, sizeof(cciss_coalint_struct
)))
1029 case CCISS_SETINTINFO
:
1031 cciss_coalint_struct intinfo
;
1032 unsigned long flags
;
1037 if (!capable(CAP_SYS_ADMIN
))
1040 (&intinfo
, argp
, sizeof(cciss_coalint_struct
)))
1042 if ((intinfo
.delay
== 0) && (intinfo
.count
== 0))
1044 // printk("cciss_ioctl: delay and count cannot be 0\n");
1047 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1048 /* Update the field, and then ring the doorbell */
1049 writel(intinfo
.delay
,
1050 &(host
->cfgtable
->HostWrite
.CoalIntDelay
));
1051 writel(intinfo
.count
,
1052 &(host
->cfgtable
->HostWrite
.CoalIntCount
));
1053 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1055 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1056 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1057 & CFGTBL_ChangeReq
))
1059 /* delay and try again */
1062 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1063 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1067 case CCISS_GETNODENAME
:
1069 NodeName_type NodeName
;
1074 for (i
= 0; i
< 16; i
++)
1076 readb(&host
->cfgtable
->ServerName
[i
]);
1077 if (copy_to_user(argp
, NodeName
, sizeof(NodeName_type
)))
1081 case CCISS_SETNODENAME
:
1083 NodeName_type NodeName
;
1084 unsigned long flags
;
1089 if (!capable(CAP_SYS_ADMIN
))
1093 (NodeName
, argp
, sizeof(NodeName_type
)))
1096 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1098 /* Update the field, and then ring the doorbell */
1099 for (i
= 0; i
< 16; i
++)
1101 &host
->cfgtable
->ServerName
[i
]);
1103 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
1105 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
1106 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
1107 & CFGTBL_ChangeReq
))
1109 /* delay and try again */
1112 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1113 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
1118 case CCISS_GETHEARTBEAT
:
1120 Heartbeat_type heartbeat
;
1124 heartbeat
= readl(&host
->cfgtable
->HeartBeat
);
1126 (argp
, &heartbeat
, sizeof(Heartbeat_type
)))
1130 case CCISS_GETBUSTYPES
:
1132 BusTypes_type BusTypes
;
1136 BusTypes
= readl(&host
->cfgtable
->BusTypes
);
1138 (argp
, &BusTypes
, sizeof(BusTypes_type
)))
1142 case CCISS_GETFIRMVER
:
1144 FirmwareVer_type firmware
;
1148 memcpy(firmware
, host
->firm_ver
, 4);
1151 (argp
, firmware
, sizeof(FirmwareVer_type
)))
1155 case CCISS_GETDRIVVER
:
1157 DriverVer_type DriverVer
= DRIVER_VERSION
;
1163 (argp
, &DriverVer
, sizeof(DriverVer_type
)))
1168 case CCISS_DEREGDISK
:
1170 case CCISS_REVALIDVOLS
:
1171 return rebuild_lun_table(host
, 0);
1173 case CCISS_GETLUNINFO
:{
1174 LogvolInfo_struct luninfo
;
1176 luninfo
.LunID
= drv
->LunID
;
1177 luninfo
.num_opens
= drv
->usage_count
;
1178 luninfo
.num_parts
= 0;
1179 if (copy_to_user(argp
, &luninfo
,
1180 sizeof(LogvolInfo_struct
)))
1184 case CCISS_PASSTHRU
:
1186 IOCTL_Command_struct iocommand
;
1187 CommandList_struct
*c
;
1190 unsigned long flags
;
1191 DECLARE_COMPLETION_ONSTACK(wait
);
1196 if (!capable(CAP_SYS_RAWIO
))
1200 (&iocommand
, argp
, sizeof(IOCTL_Command_struct
)))
1202 if ((iocommand
.buf_size
< 1) &&
1203 (iocommand
.Request
.Type
.Direction
!= XFER_NONE
)) {
1206 #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
1207 /* Check kmalloc limits */
1208 if (iocommand
.buf_size
> 128000)
1211 if (iocommand
.buf_size
> 0) {
1212 buff
= kmalloc(iocommand
.buf_size
, GFP_KERNEL
);
1216 if (iocommand
.Request
.Type
.Direction
== XFER_WRITE
) {
1217 /* Copy the data into the buffer we created */
1219 (buff
, iocommand
.buf
, iocommand
.buf_size
)) {
1224 memset(buff
, 0, iocommand
.buf_size
);
1226 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1230 // Fill in the command type
1231 c
->cmd_type
= CMD_IOCTL_PEND
;
1232 // Fill in Command Header
1233 c
->Header
.ReplyQueue
= 0; // unused in simple mode
1234 if (iocommand
.buf_size
> 0) // buffer to fill
1236 c
->Header
.SGList
= 1;
1237 c
->Header
.SGTotal
= 1;
1238 } else // no buffers to fill
1240 c
->Header
.SGList
= 0;
1241 c
->Header
.SGTotal
= 0;
1243 c
->Header
.LUN
= iocommand
.LUN_info
;
1244 c
->Header
.Tag
.lower
= c
->busaddr
; // use the kernel address the cmd block for tag
1246 // Fill in Request block
1247 c
->Request
= iocommand
.Request
;
1249 // Fill in the scatter gather information
1250 if (iocommand
.buf_size
> 0) {
1251 temp64
.val
= pci_map_single(host
->pdev
, buff
,
1253 PCI_DMA_BIDIRECTIONAL
);
1254 c
->SG
[0].Addr
.lower
= temp64
.val32
.lower
;
1255 c
->SG
[0].Addr
.upper
= temp64
.val32
.upper
;
1256 c
->SG
[0].Len
= iocommand
.buf_size
;
1257 c
->SG
[0].Ext
= 0; // we are not chaining
1261 /* Put the request on the tail of the request queue */
1262 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1263 addQ(&host
->reqQ
, c
);
1266 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1268 wait_for_completion(&wait
);
1270 /* unlock the buffers from DMA */
1271 temp64
.val32
.lower
= c
->SG
[0].Addr
.lower
;
1272 temp64
.val32
.upper
= c
->SG
[0].Addr
.upper
;
1273 pci_unmap_single(host
->pdev
, (dma_addr_t
) temp64
.val
,
1275 PCI_DMA_BIDIRECTIONAL
);
1277 check_ioctl_unit_attention(host
, c
);
1279 /* Copy the error information out */
1280 iocommand
.error_info
= *(c
->err_info
);
1282 (argp
, &iocommand
, sizeof(IOCTL_Command_struct
))) {
1284 cmd_free(host
, c
, 0);
1288 if (iocommand
.Request
.Type
.Direction
== XFER_READ
) {
1289 /* Copy the data out of the buffer we created */
1291 (iocommand
.buf
, buff
, iocommand
.buf_size
)) {
1293 cmd_free(host
, c
, 0);
1298 cmd_free(host
, c
, 0);
1301 case CCISS_BIG_PASSTHRU
:{
1302 BIG_IOCTL_Command_struct
*ioc
;
1303 CommandList_struct
*c
;
1304 unsigned char **buff
= NULL
;
1305 int *buff_size
= NULL
;
1307 unsigned long flags
;
1311 DECLARE_COMPLETION_ONSTACK(wait
);
1314 BYTE __user
*data_ptr
;
1318 if (!capable(CAP_SYS_RAWIO
))
1320 ioc
= (BIG_IOCTL_Command_struct
*)
1321 kmalloc(sizeof(*ioc
), GFP_KERNEL
);
1326 if (copy_from_user(ioc
, argp
, sizeof(*ioc
))) {
1330 if ((ioc
->buf_size
< 1) &&
1331 (ioc
->Request
.Type
.Direction
!= XFER_NONE
)) {
1335 /* Check kmalloc limits using all SGs */
1336 if (ioc
->malloc_size
> MAX_KMALLOC_SIZE
) {
1340 if (ioc
->buf_size
> ioc
->malloc_size
* MAXSGENTRIES
) {
1345 kzalloc(MAXSGENTRIES
* sizeof(char *), GFP_KERNEL
);
1350 buff_size
= kmalloc(MAXSGENTRIES
* sizeof(int),
1356 left
= ioc
->buf_size
;
1357 data_ptr
= ioc
->buf
;
1360 ioc
->malloc_size
) ? ioc
->
1362 buff_size
[sg_used
] = sz
;
1363 buff
[sg_used
] = kmalloc(sz
, GFP_KERNEL
);
1364 if (buff
[sg_used
] == NULL
) {
1368 if (ioc
->Request
.Type
.Direction
== XFER_WRITE
) {
1370 (buff
[sg_used
], data_ptr
, sz
)) {
1375 memset(buff
[sg_used
], 0, sz
);
1381 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1385 c
->cmd_type
= CMD_IOCTL_PEND
;
1386 c
->Header
.ReplyQueue
= 0;
1388 if (ioc
->buf_size
> 0) {
1389 c
->Header
.SGList
= sg_used
;
1390 c
->Header
.SGTotal
= sg_used
;
1392 c
->Header
.SGList
= 0;
1393 c
->Header
.SGTotal
= 0;
1395 c
->Header
.LUN
= ioc
->LUN_info
;
1396 c
->Header
.Tag
.lower
= c
->busaddr
;
1398 c
->Request
= ioc
->Request
;
1399 if (ioc
->buf_size
> 0) {
1401 for (i
= 0; i
< sg_used
; i
++) {
1403 pci_map_single(host
->pdev
, buff
[i
],
1405 PCI_DMA_BIDIRECTIONAL
);
1406 c
->SG
[i
].Addr
.lower
=
1408 c
->SG
[i
].Addr
.upper
=
1410 c
->SG
[i
].Len
= buff_size
[i
];
1411 c
->SG
[i
].Ext
= 0; /* we are not chaining */
1415 /* Put the request on the tail of the request queue */
1416 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1417 addQ(&host
->reqQ
, c
);
1420 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1421 wait_for_completion(&wait
);
1422 /* unlock the buffers from DMA */
1423 for (i
= 0; i
< sg_used
; i
++) {
1424 temp64
.val32
.lower
= c
->SG
[i
].Addr
.lower
;
1425 temp64
.val32
.upper
= c
->SG
[i
].Addr
.upper
;
1426 pci_unmap_single(host
->pdev
,
1427 (dma_addr_t
) temp64
.val
, buff_size
[i
],
1428 PCI_DMA_BIDIRECTIONAL
);
1430 check_ioctl_unit_attention(host
, c
);
1431 /* Copy the error information out */
1432 ioc
->error_info
= *(c
->err_info
);
1433 if (copy_to_user(argp
, ioc
, sizeof(*ioc
))) {
1434 cmd_free(host
, c
, 0);
1438 if (ioc
->Request
.Type
.Direction
== XFER_READ
) {
1439 /* Copy the data out of the buffer we created */
1440 BYTE __user
*ptr
= ioc
->buf
;
1441 for (i
= 0; i
< sg_used
; i
++) {
1443 (ptr
, buff
[i
], buff_size
[i
])) {
1444 cmd_free(host
, c
, 0);
1448 ptr
+= buff_size
[i
];
1451 cmd_free(host
, c
, 0);
1455 for (i
= 0; i
< sg_used
; i
++)
1464 /* scsi_cmd_ioctl handles these, below, though some are not */
1465 /* very meaningful for cciss. SG_IO is the main one people want. */
1467 case SG_GET_VERSION_NUM
:
1468 case SG_SET_TIMEOUT
:
1469 case SG_GET_TIMEOUT
:
1470 case SG_GET_RESERVED_SIZE
:
1471 case SG_SET_RESERVED_SIZE
:
1472 case SG_EMULATED_HOST
:
1474 case SCSI_IOCTL_SEND_COMMAND
:
1475 return scsi_cmd_ioctl(disk
->queue
, disk
, mode
, cmd
, argp
);
1477 /* scsi_cmd_ioctl would normally handle these, below, but */
1478 /* they aren't a good fit for cciss, as CD-ROMs are */
1479 /* not supported, and we don't have any bus/target/lun */
1480 /* which we present to the kernel. */
1482 case CDROM_SEND_PACKET
:
1483 case CDROMCLOSETRAY
:
1485 case SCSI_IOCTL_GET_IDLUN
:
1486 case SCSI_IOCTL_GET_BUS_NUMBER
:
1492 static void cciss_check_queues(ctlr_info_t
*h
)
1494 int start_queue
= h
->next_to_run
;
1497 /* check to see if we have maxed out the number of commands that can
1498 * be placed on the queue. If so then exit. We do this check here
1499 * in case the interrupt we serviced was from an ioctl and did not
1500 * free any new commands.
1502 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
)
1505 /* We have room on the queue for more commands. Now we need to queue
1506 * them up. We will also keep track of the next queue to run so
1507 * that every queue gets a chance to be started first.
1509 for (i
= 0; i
< h
->highest_lun
+ 1; i
++) {
1510 int curr_queue
= (start_queue
+ i
) % (h
->highest_lun
+ 1);
1511 /* make sure the disk has been added and the drive is real
1512 * because this can be called from the middle of init_one.
1514 if (!(h
->drv
[curr_queue
].queue
) || !(h
->drv
[curr_queue
].heads
))
1516 blk_start_queue(h
->gendisk
[curr_queue
]->queue
);
1518 /* check to see if we have maxed out the number of commands
1519 * that can be placed on the queue.
1521 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
) {
1522 if (curr_queue
== start_queue
) {
1524 (start_queue
+ 1) % (h
->highest_lun
+ 1);
1527 h
->next_to_run
= curr_queue
;
1534 static void cciss_softirq_done(struct request
*rq
)
1536 CommandList_struct
*cmd
= rq
->completion_data
;
1537 ctlr_info_t
*h
= hba
[cmd
->ctlr
];
1538 unsigned long flags
;
1542 if (cmd
->Request
.Type
.Direction
== XFER_READ
)
1543 ddir
= PCI_DMA_FROMDEVICE
;
1545 ddir
= PCI_DMA_TODEVICE
;
1547 /* command did not need to be retried */
1548 /* unmap the DMA mapping for all the scatter gather elements */
1549 for (i
= 0; i
< cmd
->Header
.SGList
; i
++) {
1550 temp64
.val32
.lower
= cmd
->SG
[i
].Addr
.lower
;
1551 temp64
.val32
.upper
= cmd
->SG
[i
].Addr
.upper
;
1552 pci_unmap_page(h
->pdev
, temp64
.val
, cmd
->SG
[i
].Len
, ddir
);
1556 printk("Done with %p\n", rq
);
1557 #endif /* CCISS_DEBUG */
1559 /* set the residual count for pc requests */
1560 if (blk_pc_request(rq
))
1561 rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
1563 blk_end_request_all(rq
, (rq
->errors
== 0) ? 0 : -EIO
);
1565 spin_lock_irqsave(&h
->lock
, flags
);
1566 cmd_free(h
, cmd
, 1);
1567 cciss_check_queues(h
);
1568 spin_unlock_irqrestore(&h
->lock
, flags
);
1571 static void log_unit_to_scsi3addr(ctlr_info_t
*h
, unsigned char scsi3addr
[],
1574 log_unit
= h
->drv
[log_unit
].LunID
& 0x03fff;
1575 memset(&scsi3addr
[4], 0, 4);
1576 memcpy(&scsi3addr
[0], &log_unit
, 4);
1577 scsi3addr
[3] |= 0x40;
1580 /* This function gets the SCSI vendor, model, and revision of a logical drive
1581 * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
1582 * they cannot be read.
1584 static void cciss_get_device_descr(int ctlr
, int logvol
, int withirq
,
1585 char *vendor
, char *model
, char *rev
)
1588 InquiryData_struct
*inq_buf
;
1589 unsigned char scsi3addr
[8];
1595 inq_buf
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1599 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1601 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, inq_buf
,
1602 sizeof(InquiryData_struct
), 0,
1603 scsi3addr
, TYPE_CMD
);
1605 rc
= sendcmd(CISS_INQUIRY
, ctlr
, inq_buf
,
1606 sizeof(InquiryData_struct
), 0,
1607 scsi3addr
, TYPE_CMD
);
1609 memcpy(vendor
, &inq_buf
->data_byte
[8], VENDOR_LEN
);
1610 vendor
[VENDOR_LEN
] = '\0';
1611 memcpy(model
, &inq_buf
->data_byte
[16], MODEL_LEN
);
1612 model
[MODEL_LEN
] = '\0';
1613 memcpy(rev
, &inq_buf
->data_byte
[32], REV_LEN
);
1614 rev
[REV_LEN
] = '\0';
1621 /* This function gets the serial number of a logical drive via
1622 * inquiry page 0x83. Serial no. is 16 bytes. If the serial
1623 * number cannot be had, for whatever reason, 16 bytes of 0xff
1624 * are returned instead.
1626 static void cciss_get_serial_no(int ctlr
, int logvol
, int withirq
,
1627 unsigned char *serial_no
, int buflen
)
1629 #define PAGE_83_INQ_BYTES 64
1632 unsigned char scsi3addr
[8];
1636 memset(serial_no
, 0xff, buflen
);
1637 buf
= kzalloc(PAGE_83_INQ_BYTES
, GFP_KERNEL
);
1640 memset(serial_no
, 0, buflen
);
1641 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
1643 rc
= sendcmd_withirq(CISS_INQUIRY
, ctlr
, buf
,
1644 PAGE_83_INQ_BYTES
, 0x83, scsi3addr
, TYPE_CMD
);
1646 rc
= sendcmd(CISS_INQUIRY
, ctlr
, buf
,
1647 PAGE_83_INQ_BYTES
, 0x83, scsi3addr
, TYPE_CMD
);
1649 memcpy(serial_no
, &buf
[8], buflen
);
1654 static void cciss_add_disk(ctlr_info_t
*h
, struct gendisk
*disk
,
1657 disk
->queue
= blk_init_queue(do_cciss_request
, &h
->lock
);
1658 sprintf(disk
->disk_name
, "cciss/c%dd%d", h
->ctlr
, drv_index
);
1659 disk
->major
= h
->major
;
1660 disk
->first_minor
= drv_index
<< NWD_SHIFT
;
1661 disk
->fops
= &cciss_fops
;
1662 disk
->private_data
= &h
->drv
[drv_index
];
1663 disk
->driverfs_dev
= &h
->drv
[drv_index
].dev
;
1665 /* Set up queue information */
1666 blk_queue_bounce_limit(disk
->queue
, h
->pdev
->dma_mask
);
1668 /* This is a hardware imposed limit. */
1669 blk_queue_max_hw_segments(disk
->queue
, MAXSGENTRIES
);
1671 /* This is a limit in the driver and could be eliminated. */
1672 blk_queue_max_phys_segments(disk
->queue
, MAXSGENTRIES
);
1674 blk_queue_max_sectors(disk
->queue
, h
->cciss_max_sectors
);
1676 blk_queue_softirq_done(disk
->queue
, cciss_softirq_done
);
1678 disk
->queue
->queuedata
= h
;
1680 blk_queue_logical_block_size(disk
->queue
,
1681 h
->drv
[drv_index
].block_size
);
1683 /* Make sure all queue data is written out before */
1684 /* setting h->drv[drv_index].queue, as setting this */
1685 /* allows the interrupt handler to start the queue */
1687 h
->drv
[drv_index
].queue
= disk
->queue
;
1691 /* This function will check the usage_count of the drive to be updated/added.
1692 * If the usage_count is zero and it is a heretofore unknown drive, or,
1693 * the drive's capacity, geometry, or serial number has changed,
1694 * then the drive information will be updated and the disk will be
1695 * re-registered with the kernel. If these conditions don't hold,
1696 * then it will be left alone for the next reboot. The exception to this
1697 * is disk 0 which will always be left registered with the kernel since it
1698 * is also the controller node. Any changes to disk 0 will show up on
1701 static void cciss_update_drive_info(int ctlr
, int drv_index
, int first_time
)
1703 ctlr_info_t
*h
= hba
[ctlr
];
1704 struct gendisk
*disk
;
1705 InquiryData_struct
*inq_buff
= NULL
;
1706 unsigned int block_size
;
1707 sector_t total_size
;
1708 unsigned long flags
= 0;
1710 drive_info_struct
*drvinfo
;
1712 /* Get information about the disk and modify the driver structure */
1713 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1714 drvinfo
= kmalloc(sizeof(*drvinfo
), GFP_KERNEL
);
1715 if (inq_buff
== NULL
|| drvinfo
== NULL
)
1718 /* testing to see if 16-byte CDBs are already being used */
1719 if (h
->cciss_read
== CCISS_READ_16
) {
1720 cciss_read_capacity_16(h
->ctlr
, drv_index
, 1,
1721 &total_size
, &block_size
);
1724 cciss_read_capacity(ctlr
, drv_index
, 1,
1725 &total_size
, &block_size
);
1727 /* if read_capacity returns all F's this volume is >2TB */
1728 /* in size so we switch to 16-byte CDB's for all */
1729 /* read/write ops */
1730 if (total_size
== 0xFFFFFFFFULL
) {
1731 cciss_read_capacity_16(ctlr
, drv_index
, 1,
1732 &total_size
, &block_size
);
1733 h
->cciss_read
= CCISS_READ_16
;
1734 h
->cciss_write
= CCISS_WRITE_16
;
1736 h
->cciss_read
= CCISS_READ_10
;
1737 h
->cciss_write
= CCISS_WRITE_10
;
1741 cciss_geometry_inquiry(ctlr
, drv_index
, 1, total_size
, block_size
,
1743 drvinfo
->block_size
= block_size
;
1744 drvinfo
->nr_blocks
= total_size
+ 1;
1746 cciss_get_device_descr(ctlr
, drv_index
, 1, drvinfo
->vendor
,
1747 drvinfo
->model
, drvinfo
->rev
);
1748 cciss_get_serial_no(ctlr
, drv_index
, 1, drvinfo
->serial_no
,
1749 sizeof(drvinfo
->serial_no
));
1751 /* Is it the same disk we already know, and nothing's changed? */
1752 if (h
->drv
[drv_index
].raid_level
!= -1 &&
1753 ((memcmp(drvinfo
->serial_no
,
1754 h
->drv
[drv_index
].serial_no
, 16) == 0) &&
1755 drvinfo
->block_size
== h
->drv
[drv_index
].block_size
&&
1756 drvinfo
->nr_blocks
== h
->drv
[drv_index
].nr_blocks
&&
1757 drvinfo
->heads
== h
->drv
[drv_index
].heads
&&
1758 drvinfo
->sectors
== h
->drv
[drv_index
].sectors
&&
1759 drvinfo
->cylinders
== h
->drv
[drv_index
].cylinders
))
1760 /* The disk is unchanged, nothing to update */
1763 /* If we get here it's not the same disk, or something's changed,
1764 * so we need to * deregister it, and re-register it, if it's not
1766 * If the disk already exists then deregister it before proceeding
1767 * (unless it's the first disk (for the controller node).
1769 if (h
->drv
[drv_index
].raid_level
!= -1 && drv_index
!= 0) {
1770 printk(KERN_WARNING
"disk %d has changed.\n", drv_index
);
1771 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1772 h
->drv
[drv_index
].busy_configuring
= 1;
1773 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1775 /* deregister_disk sets h->drv[drv_index].queue = NULL
1776 * which keeps the interrupt handler from starting
1779 ret
= deregister_disk(h
, drv_index
, 0);
1780 h
->drv
[drv_index
].busy_configuring
= 0;
1783 /* If the disk is in use return */
1787 /* Save the new information from cciss_geometry_inquiry
1788 * and serial number inquiry.
1790 h
->drv
[drv_index
].block_size
= drvinfo
->block_size
;
1791 h
->drv
[drv_index
].nr_blocks
= drvinfo
->nr_blocks
;
1792 h
->drv
[drv_index
].heads
= drvinfo
->heads
;
1793 h
->drv
[drv_index
].sectors
= drvinfo
->sectors
;
1794 h
->drv
[drv_index
].cylinders
= drvinfo
->cylinders
;
1795 h
->drv
[drv_index
].raid_level
= drvinfo
->raid_level
;
1796 memcpy(h
->drv
[drv_index
].serial_no
, drvinfo
->serial_no
, 16);
1797 memcpy(h
->drv
[drv_index
].vendor
, drvinfo
->vendor
, VENDOR_LEN
+ 1);
1798 memcpy(h
->drv
[drv_index
].model
, drvinfo
->model
, MODEL_LEN
+ 1);
1799 memcpy(h
->drv
[drv_index
].rev
, drvinfo
->rev
, REV_LEN
+ 1);
1802 disk
= h
->gendisk
[drv_index
];
1803 set_capacity(disk
, h
->drv
[drv_index
].nr_blocks
);
1805 /* If it's not disk 0 (drv_index != 0)
1806 * or if it was disk 0, but there was previously
1807 * no actual corresponding configured logical drive
1808 * (raid_leve == -1) then we want to update the
1809 * logical drive's information.
1811 if (drv_index
|| first_time
)
1812 cciss_add_disk(h
, disk
, drv_index
);
1819 printk(KERN_ERR
"cciss: out of memory\n");
1823 /* This function will find the first index of the controllers drive array
1824 * that has a -1 for the raid_level and will return that index. This is
1825 * where new drives will be added. If the index to be returned is greater
1826 * than the highest_lun index for the controller then highest_lun is set
1827 * to this new index. If there are no available indexes then -1 is returned.
1828 * "controller_node" is used to know if this is a real logical drive, or just
1829 * the controller node, which determines if this counts towards highest_lun.
1831 static int cciss_find_free_drive_index(int ctlr
, int controller_node
)
1835 for (i
= 0; i
< CISS_MAX_LUN
; i
++) {
1836 if (hba
[ctlr
]->drv
[i
].raid_level
== -1) {
1837 if (i
> hba
[ctlr
]->highest_lun
)
1838 if (!controller_node
)
1839 hba
[ctlr
]->highest_lun
= i
;
1846 /* cciss_add_gendisk finds a free hba[]->drv structure
1847 * and allocates a gendisk if needed, and sets the lunid
1848 * in the drvinfo structure. It returns the index into
1849 * the ->drv[] array, or -1 if none are free.
1850 * is_controller_node indicates whether highest_lun should
1851 * count this disk, or if it's only being added to provide
1852 * a means to talk to the controller in case no logical
1853 * drives have yet been configured.
1855 static int cciss_add_gendisk(ctlr_info_t
*h
, __u32 lunid
, int controller_node
)
1859 drv_index
= cciss_find_free_drive_index(h
->ctlr
, controller_node
);
1860 if (drv_index
== -1)
1862 /*Check if the gendisk needs to be allocated */
1863 if (!h
->gendisk
[drv_index
]) {
1864 h
->gendisk
[drv_index
] =
1865 alloc_disk(1 << NWD_SHIFT
);
1866 if (!h
->gendisk
[drv_index
]) {
1867 printk(KERN_ERR
"cciss%d: could not "
1868 "allocate a new disk %d\n",
1869 h
->ctlr
, drv_index
);
1873 h
->drv
[drv_index
].LunID
= lunid
;
1874 if (cciss_create_ld_sysfs_entry(h
, &h
->drv
[drv_index
], drv_index
))
1877 /* Don't need to mark this busy because nobody */
1878 /* else knows about this disk yet to contend */
1879 /* for access to it. */
1880 h
->drv
[drv_index
].busy_configuring
= 0;
1885 put_disk(h
->gendisk
[drv_index
]);
1886 h
->gendisk
[drv_index
] = NULL
;
1890 /* This is for the special case of a controller which
1891 * has no logical drives. In this case, we still need
1892 * to register a disk so the controller can be accessed
1893 * by the Array Config Utility.
1895 static void cciss_add_controller_node(ctlr_info_t
*h
)
1897 struct gendisk
*disk
;
1900 if (h
->gendisk
[0] != NULL
) /* already did this? Then bail. */
1903 drv_index
= cciss_add_gendisk(h
, 0, 1);
1904 if (drv_index
== -1) {
1905 printk(KERN_WARNING
"cciss%d: could not "
1906 "add disk 0.\n", h
->ctlr
);
1909 h
->drv
[drv_index
].block_size
= 512;
1910 h
->drv
[drv_index
].nr_blocks
= 0;
1911 h
->drv
[drv_index
].heads
= 0;
1912 h
->drv
[drv_index
].sectors
= 0;
1913 h
->drv
[drv_index
].cylinders
= 0;
1914 h
->drv
[drv_index
].raid_level
= -1;
1915 memset(h
->drv
[drv_index
].serial_no
, 0, 16);
1916 disk
= h
->gendisk
[drv_index
];
1917 cciss_add_disk(h
, disk
, drv_index
);
1920 /* This function will add and remove logical drives from the Logical
1921 * drive array of the controller and maintain persistency of ordering
1922 * so that mount points are preserved until the next reboot. This allows
1923 * for the removal of logical drives in the middle of the drive array
1924 * without a re-ordering of those drives.
1926 * h = The controller to perform the operations on
1928 static int rebuild_lun_table(ctlr_info_t
*h
, int first_time
)
1932 ReportLunData_struct
*ld_buff
= NULL
;
1939 unsigned long flags
;
1941 if (!capable(CAP_SYS_RAWIO
))
1944 /* Set busy_configuring flag for this operation */
1945 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1946 if (h
->busy_configuring
) {
1947 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1950 h
->busy_configuring
= 1;
1951 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1953 ld_buff
= kzalloc(sizeof(ReportLunData_struct
), GFP_KERNEL
);
1954 if (ld_buff
== NULL
)
1957 return_code
= sendcmd_withirq(CISS_REPORT_LOG
, ctlr
, ld_buff
,
1958 sizeof(ReportLunData_struct
),
1959 0, CTLR_LUNID
, TYPE_CMD
);
1961 if (return_code
== IO_OK
)
1962 listlength
= be32_to_cpu(*(__be32
*) ld_buff
->LUNListLength
);
1963 else { /* reading number of logical volumes failed */
1964 printk(KERN_WARNING
"cciss: report logical volume"
1965 " command failed\n");
1970 num_luns
= listlength
/ 8; /* 8 bytes per entry */
1971 if (num_luns
> CISS_MAX_LUN
) {
1972 num_luns
= CISS_MAX_LUN
;
1973 printk(KERN_WARNING
"cciss: more luns configured"
1974 " on controller than can be handled by"
1979 cciss_add_controller_node(h
);
1981 /* Compare controller drive array to driver's drive array
1982 * to see if any drives are missing on the controller due
1983 * to action of Array Config Utility (user deletes drive)
1984 * and deregister logical drives which have disappeared.
1986 for (i
= 0; i
<= h
->highest_lun
; i
++) {
1990 /* skip holes in the array from already deleted drives */
1991 if (h
->drv
[i
].raid_level
== -1)
1994 for (j
= 0; j
< num_luns
; j
++) {
1995 memcpy(&lunid
, &ld_buff
->LUN
[j
][0], 4);
1996 lunid
= le32_to_cpu(lunid
);
1997 if (h
->drv
[i
].LunID
== lunid
) {
2003 /* Deregister it from the OS, it's gone. */
2004 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2005 h
->drv
[i
].busy_configuring
= 1;
2006 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2007 return_code
= deregister_disk(h
, i
, 1);
2008 h
->drv
[i
].busy_configuring
= 0;
2012 /* Compare controller drive array to driver's drive array.
2013 * Check for updates in the drive information and any new drives
2014 * on the controller due to ACU adding logical drives, or changing
2015 * a logical drive's size, etc. Reregister any new/changed drives
2017 for (i
= 0; i
< num_luns
; i
++) {
2022 memcpy(&lunid
, &ld_buff
->LUN
[i
][0], 4);
2023 lunid
= le32_to_cpu(lunid
);
2025 /* Find if the LUN is already in the drive array
2026 * of the driver. If so then update its info
2027 * if not in use. If it does not exist then find
2028 * the first free index and add it.
2030 for (j
= 0; j
<= h
->highest_lun
; j
++) {
2031 if (h
->drv
[j
].raid_level
!= -1 &&
2032 h
->drv
[j
].LunID
== lunid
) {
2039 /* check if the drive was found already in the array */
2041 drv_index
= cciss_add_gendisk(h
, lunid
, 0);
2042 if (drv_index
== -1)
2045 cciss_update_drive_info(ctlr
, drv_index
, first_time
);
2050 h
->busy_configuring
= 0;
2051 /* We return -1 here to tell the ACU that we have registered/updated
2052 * all of the drives that we can and to keep it from calling us
2057 printk(KERN_ERR
"cciss: out of memory\n");
2058 h
->busy_configuring
= 0;
2062 /* This function will deregister the disk and it's queue from the
2063 * kernel. It must be called with the controller lock held and the
2064 * drv structures busy_configuring flag set. It's parameters are:
2066 * disk = This is the disk to be deregistered
2067 * drv = This is the drive_info_struct associated with the disk to be
2068 * deregistered. It contains information about the disk used
2070 * clear_all = This flag determines whether or not the disk information
2071 * is going to be completely cleared out and the highest_lun
2072 * reset. Sometimes we want to clear out information about
2073 * the disk in preparation for re-adding it. In this case
2074 * the highest_lun should be left unchanged and the LunID
2075 * should not be cleared.
2077 static int deregister_disk(ctlr_info_t
*h
, int drv_index
,
2081 struct gendisk
*disk
;
2082 drive_info_struct
*drv
;
2084 if (!capable(CAP_SYS_RAWIO
))
2087 drv
= &h
->drv
[drv_index
];
2088 disk
= h
->gendisk
[drv_index
];
2090 /* make sure logical volume is NOT is use */
2091 if (clear_all
|| (h
->gendisk
[0] == disk
)) {
2092 if (drv
->usage_count
> 1)
2094 } else if (drv
->usage_count
> 0)
2097 /* invalidate the devices and deregister the disk. If it is disk
2098 * zero do not deregister it but just zero out it's values. This
2099 * allows us to delete disk zero but keep the controller registered.
2101 if (h
->gendisk
[0] != disk
) {
2102 struct request_queue
*q
= disk
->queue
;
2103 if (disk
->flags
& GENHD_FL_UP
)
2106 blk_cleanup_queue(q
);
2107 /* Set drv->queue to NULL so that we do not try
2108 * to call blk_start_queue on this queue in the
2113 /* If clear_all is set then we are deleting the logical
2114 * drive, not just refreshing its info. For drives
2115 * other than disk 0 we will call put_disk. We do not
2116 * do this for disk 0 as we need it to be able to
2117 * configure the controller.
2120 /* This isn't pretty, but we need to find the
2121 * disk in our array and NULL our the pointer.
2122 * This is so that we will call alloc_disk if
2123 * this index is used again later.
2125 for (i
=0; i
< CISS_MAX_LUN
; i
++){
2126 if (h
->gendisk
[i
] == disk
) {
2127 h
->gendisk
[i
] = NULL
;
2134 set_capacity(disk
, 0);
2138 /* zero out the disk size info */
2140 drv
->block_size
= 0;
2144 drv
->raid_level
= -1; /* This can be used as a flag variable to
2145 * indicate that this element of the drive
2148 cciss_destroy_ld_sysfs_entry(drv
);
2151 /* check to see if it was the last disk */
2152 if (drv
== h
->drv
+ h
->highest_lun
) {
2153 /* if so, find the new hightest lun */
2154 int i
, newhighest
= -1;
2155 for (i
= 0; i
<= h
->highest_lun
; i
++) {
2156 /* if the disk has size > 0, it is available */
2157 if (h
->drv
[i
].heads
)
2160 h
->highest_lun
= newhighest
;
2168 static int fill_cmd(CommandList_struct
*c
, __u8 cmd
, int ctlr
, void *buff
,
2169 size_t size
, __u8 page_code
, unsigned char *scsi3addr
,
2172 ctlr_info_t
*h
= hba
[ctlr
];
2173 u64bit buff_dma_handle
;
2176 c
->cmd_type
= CMD_IOCTL_PEND
;
2177 c
->Header
.ReplyQueue
= 0;
2179 c
->Header
.SGList
= 1;
2180 c
->Header
.SGTotal
= 1;
2182 c
->Header
.SGList
= 0;
2183 c
->Header
.SGTotal
= 0;
2185 c
->Header
.Tag
.lower
= c
->busaddr
;
2186 memcpy(c
->Header
.LUN
.LunAddrBytes
, scsi3addr
, 8);
2188 c
->Request
.Type
.Type
= cmd_type
;
2189 if (cmd_type
== TYPE_CMD
) {
2192 /* are we trying to read a vital product page */
2193 if (page_code
!= 0) {
2194 c
->Request
.CDB
[1] = 0x01;
2195 c
->Request
.CDB
[2] = page_code
;
2197 c
->Request
.CDBLen
= 6;
2198 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2199 c
->Request
.Type
.Direction
= XFER_READ
;
2200 c
->Request
.Timeout
= 0;
2201 c
->Request
.CDB
[0] = CISS_INQUIRY
;
2202 c
->Request
.CDB
[4] = size
& 0xFF;
2204 case CISS_REPORT_LOG
:
2205 case CISS_REPORT_PHYS
:
2206 /* Talking to controller so It's a physical command
2207 mode = 00 target = 0. Nothing to write.
2209 c
->Request
.CDBLen
= 12;
2210 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2211 c
->Request
.Type
.Direction
= XFER_READ
;
2212 c
->Request
.Timeout
= 0;
2213 c
->Request
.CDB
[0] = cmd
;
2214 c
->Request
.CDB
[6] = (size
>> 24) & 0xFF; //MSB
2215 c
->Request
.CDB
[7] = (size
>> 16) & 0xFF;
2216 c
->Request
.CDB
[8] = (size
>> 8) & 0xFF;
2217 c
->Request
.CDB
[9] = size
& 0xFF;
2220 case CCISS_READ_CAPACITY
:
2221 c
->Request
.CDBLen
= 10;
2222 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2223 c
->Request
.Type
.Direction
= XFER_READ
;
2224 c
->Request
.Timeout
= 0;
2225 c
->Request
.CDB
[0] = cmd
;
2227 case CCISS_READ_CAPACITY_16
:
2228 c
->Request
.CDBLen
= 16;
2229 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2230 c
->Request
.Type
.Direction
= XFER_READ
;
2231 c
->Request
.Timeout
= 0;
2232 c
->Request
.CDB
[0] = cmd
;
2233 c
->Request
.CDB
[1] = 0x10;
2234 c
->Request
.CDB
[10] = (size
>> 24) & 0xFF;
2235 c
->Request
.CDB
[11] = (size
>> 16) & 0xFF;
2236 c
->Request
.CDB
[12] = (size
>> 8) & 0xFF;
2237 c
->Request
.CDB
[13] = size
& 0xFF;
2238 c
->Request
.Timeout
= 0;
2239 c
->Request
.CDB
[0] = cmd
;
2241 case CCISS_CACHE_FLUSH
:
2242 c
->Request
.CDBLen
= 12;
2243 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2244 c
->Request
.Type
.Direction
= XFER_WRITE
;
2245 c
->Request
.Timeout
= 0;
2246 c
->Request
.CDB
[0] = BMIC_WRITE
;
2247 c
->Request
.CDB
[6] = BMIC_CACHE_FLUSH
;
2249 case TEST_UNIT_READY
:
2250 c
->Request
.CDBLen
= 6;
2251 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2252 c
->Request
.Type
.Direction
= XFER_NONE
;
2253 c
->Request
.Timeout
= 0;
2257 "cciss%d: Unknown Command 0x%c\n", ctlr
, cmd
);
2260 } else if (cmd_type
== TYPE_MSG
) {
2262 case 0: /* ABORT message */
2263 c
->Request
.CDBLen
= 12;
2264 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2265 c
->Request
.Type
.Direction
= XFER_WRITE
;
2266 c
->Request
.Timeout
= 0;
2267 c
->Request
.CDB
[0] = cmd
; /* abort */
2268 c
->Request
.CDB
[1] = 0; /* abort a command */
2269 /* buff contains the tag of the command to abort */
2270 memcpy(&c
->Request
.CDB
[4], buff
, 8);
2272 case 1: /* RESET message */
2273 c
->Request
.CDBLen
= 16;
2274 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2275 c
->Request
.Type
.Direction
= XFER_NONE
;
2276 c
->Request
.Timeout
= 0;
2277 memset(&c
->Request
.CDB
[0], 0, sizeof(c
->Request
.CDB
));
2278 c
->Request
.CDB
[0] = cmd
; /* reset */
2279 c
->Request
.CDB
[1] = 0x03; /* reset a target */
2281 case 3: /* No-Op message */
2282 c
->Request
.CDBLen
= 1;
2283 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2284 c
->Request
.Type
.Direction
= XFER_WRITE
;
2285 c
->Request
.Timeout
= 0;
2286 c
->Request
.CDB
[0] = cmd
;
2290 "cciss%d: unknown message type %d\n", ctlr
, cmd
);
2295 "cciss%d: unknown command type %d\n", ctlr
, cmd_type
);
2298 /* Fill in the scatter gather information */
2300 buff_dma_handle
.val
= (__u64
) pci_map_single(h
->pdev
,
2302 PCI_DMA_BIDIRECTIONAL
);
2303 c
->SG
[0].Addr
.lower
= buff_dma_handle
.val32
.lower
;
2304 c
->SG
[0].Addr
.upper
= buff_dma_handle
.val32
.upper
;
2305 c
->SG
[0].Len
= size
;
2306 c
->SG
[0].Ext
= 0; /* we are not chaining */
2311 static int check_target_status(ctlr_info_t
*h
, CommandList_struct
*c
)
2313 switch (c
->err_info
->ScsiStatus
) {
2316 case SAM_STAT_CHECK_CONDITION
:
2317 switch (0xf & c
->err_info
->SenseInfo
[2]) {
2318 case 0: return IO_OK
; /* no sense */
2319 case 1: return IO_OK
; /* recovered error */
2321 printk(KERN_WARNING
"cciss%d: cmd 0x%02x "
2322 "check condition, sense key = 0x%02x\n",
2323 h
->ctlr
, c
->Request
.CDB
[0],
2324 c
->err_info
->SenseInfo
[2]);
2328 printk(KERN_WARNING
"cciss%d: cmd 0x%02x"
2329 "scsi status = 0x%02x\n", h
->ctlr
,
2330 c
->Request
.CDB
[0], c
->err_info
->ScsiStatus
);
2336 static int process_sendcmd_error(ctlr_info_t
*h
, CommandList_struct
*c
)
2338 int return_status
= IO_OK
;
2340 if (c
->err_info
->CommandStatus
== CMD_SUCCESS
)
2343 switch (c
->err_info
->CommandStatus
) {
2344 case CMD_TARGET_STATUS
:
2345 return_status
= check_target_status(h
, c
);
2347 case CMD_DATA_UNDERRUN
:
2348 case CMD_DATA_OVERRUN
:
2349 /* expected for inquiry and report lun commands */
2352 printk(KERN_WARNING
"cciss: cmd 0x%02x is "
2353 "reported invalid\n", c
->Request
.CDB
[0]);
2354 return_status
= IO_ERROR
;
2356 case CMD_PROTOCOL_ERR
:
2357 printk(KERN_WARNING
"cciss: cmd 0x%02x has "
2358 "protocol error \n", c
->Request
.CDB
[0]);
2359 return_status
= IO_ERROR
;
2361 case CMD_HARDWARE_ERR
:
2362 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2363 " hardware error\n", c
->Request
.CDB
[0]);
2364 return_status
= IO_ERROR
;
2366 case CMD_CONNECTION_LOST
:
2367 printk(KERN_WARNING
"cciss: cmd 0x%02x had "
2368 "connection lost\n", c
->Request
.CDB
[0]);
2369 return_status
= IO_ERROR
;
2372 printk(KERN_WARNING
"cciss: cmd 0x%02x was "
2373 "aborted\n", c
->Request
.CDB
[0]);
2374 return_status
= IO_ERROR
;
2376 case CMD_ABORT_FAILED
:
2377 printk(KERN_WARNING
"cciss: cmd 0x%02x reports "
2378 "abort failed\n", c
->Request
.CDB
[0]);
2379 return_status
= IO_ERROR
;
2381 case CMD_UNSOLICITED_ABORT
:
2383 "cciss%d: unsolicited abort 0x%02x\n", h
->ctlr
,
2385 return_status
= IO_NEEDS_RETRY
;
2388 printk(KERN_WARNING
"cciss: cmd 0x%02x returned "
2389 "unknown status %x\n", c
->Request
.CDB
[0],
2390 c
->err_info
->CommandStatus
);
2391 return_status
= IO_ERROR
;
2393 return return_status
;
2396 static int sendcmd_withirq_core(ctlr_info_t
*h
, CommandList_struct
*c
,
2399 DECLARE_COMPLETION_ONSTACK(wait
);
2400 u64bit buff_dma_handle
;
2401 unsigned long flags
;
2402 int return_status
= IO_OK
;
2406 /* Put the request on the tail of the queue and send it */
2407 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2411 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2413 wait_for_completion(&wait
);
2415 if (c
->err_info
->CommandStatus
== 0 || !attempt_retry
)
2418 return_status
= process_sendcmd_error(h
, c
);
2420 if (return_status
== IO_NEEDS_RETRY
&&
2421 c
->retry_count
< MAX_CMD_RETRIES
) {
2422 printk(KERN_WARNING
"cciss%d: retrying 0x%02x\n", h
->ctlr
,
2425 /* erase the old error information */
2426 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2427 return_status
= IO_OK
;
2428 INIT_COMPLETION(wait
);
2433 /* unlock the buffers from DMA */
2434 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2435 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2436 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2437 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2438 return return_status
;
2441 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
2442 __u8 page_code
, unsigned char scsi3addr
[],
2445 ctlr_info_t
*h
= hba
[ctlr
];
2446 CommandList_struct
*c
;
2449 c
= cmd_alloc(h
, 0);
2452 return_status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, page_code
,
2453 scsi3addr
, cmd_type
);
2454 if (return_status
== IO_OK
)
2455 return_status
= sendcmd_withirq_core(h
, c
, 1);
2458 return return_status
;
2461 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
2462 int withirq
, sector_t total_size
,
2463 unsigned int block_size
,
2464 InquiryData_struct
*inq_buff
,
2465 drive_info_struct
*drv
)
2469 unsigned char scsi3addr
[8];
2471 memset(inq_buff
, 0, sizeof(InquiryData_struct
));
2472 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2474 return_code
= sendcmd_withirq(CISS_INQUIRY
, ctlr
,
2475 inq_buff
, sizeof(*inq_buff
),
2476 0xC1, scsi3addr
, TYPE_CMD
);
2478 return_code
= sendcmd(CISS_INQUIRY
, ctlr
, inq_buff
,
2479 sizeof(*inq_buff
), 0xC1, scsi3addr
,
2481 if (return_code
== IO_OK
) {
2482 if (inq_buff
->data_byte
[8] == 0xFF) {
2484 "cciss: reading geometry failed, volume "
2485 "does not support reading geometry\n");
2487 drv
->sectors
= 32; // Sectors per track
2488 drv
->cylinders
= total_size
+ 1;
2489 drv
->raid_level
= RAID_UNKNOWN
;
2491 drv
->heads
= inq_buff
->data_byte
[6];
2492 drv
->sectors
= inq_buff
->data_byte
[7];
2493 drv
->cylinders
= (inq_buff
->data_byte
[4] & 0xff) << 8;
2494 drv
->cylinders
+= inq_buff
->data_byte
[5];
2495 drv
->raid_level
= inq_buff
->data_byte
[8];
2497 drv
->block_size
= block_size
;
2498 drv
->nr_blocks
= total_size
+ 1;
2499 t
= drv
->heads
* drv
->sectors
;
2501 sector_t real_size
= total_size
+ 1;
2502 unsigned long rem
= sector_div(real_size
, t
);
2505 drv
->cylinders
= real_size
;
2507 } else { /* Get geometry failed */
2508 printk(KERN_WARNING
"cciss: reading geometry failed\n");
2510 printk(KERN_INFO
" heads=%d, sectors=%d, cylinders=%d\n\n",
2511 drv
->heads
, drv
->sectors
, drv
->cylinders
);
2515 cciss_read_capacity(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
,
2516 unsigned int *block_size
)
2518 ReadCapdata_struct
*buf
;
2520 unsigned char scsi3addr
[8];
2522 buf
= kzalloc(sizeof(ReadCapdata_struct
), GFP_KERNEL
);
2524 printk(KERN_WARNING
"cciss: out of memory\n");
2528 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2530 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY
,
2531 ctlr
, buf
, sizeof(ReadCapdata_struct
),
2532 0, scsi3addr
, TYPE_CMD
);
2534 return_code
= sendcmd(CCISS_READ_CAPACITY
,
2535 ctlr
, buf
, sizeof(ReadCapdata_struct
),
2536 0, scsi3addr
, TYPE_CMD
);
2537 if (return_code
== IO_OK
) {
2538 *total_size
= be32_to_cpu(*(__be32
*) buf
->total_size
);
2539 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2540 } else { /* read capacity command failed */
2541 printk(KERN_WARNING
"cciss: read capacity failed\n");
2543 *block_size
= BLOCK_SIZE
;
2545 if (*total_size
!= 0)
2546 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2547 (unsigned long long)*total_size
+1, *block_size
);
2552 cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
, unsigned int *block_size
)
2554 ReadCapdata_struct_16
*buf
;
2556 unsigned char scsi3addr
[8];
2558 buf
= kzalloc(sizeof(ReadCapdata_struct_16
), GFP_KERNEL
);
2560 printk(KERN_WARNING
"cciss: out of memory\n");
2564 log_unit_to_scsi3addr(hba
[ctlr
], scsi3addr
, logvol
);
2566 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY_16
,
2567 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2568 0, scsi3addr
, TYPE_CMD
);
2571 return_code
= sendcmd(CCISS_READ_CAPACITY_16
,
2572 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2573 0, scsi3addr
, TYPE_CMD
);
2575 if (return_code
== IO_OK
) {
2576 *total_size
= be64_to_cpu(*(__be64
*) buf
->total_size
);
2577 *block_size
= be32_to_cpu(*(__be32
*) buf
->block_size
);
2578 } else { /* read capacity command failed */
2579 printk(KERN_WARNING
"cciss: read capacity failed\n");
2581 *block_size
= BLOCK_SIZE
;
2583 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2584 (unsigned long long)*total_size
+1, *block_size
);
2588 static int cciss_revalidate(struct gendisk
*disk
)
2590 ctlr_info_t
*h
= get_host(disk
);
2591 drive_info_struct
*drv
= get_drv(disk
);
2594 unsigned int block_size
;
2595 sector_t total_size
;
2596 InquiryData_struct
*inq_buff
= NULL
;
2598 for (logvol
= 0; logvol
< CISS_MAX_LUN
; logvol
++) {
2599 if (h
->drv
[logvol
].LunID
== drv
->LunID
) {
2608 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
2609 if (inq_buff
== NULL
) {
2610 printk(KERN_WARNING
"cciss: out of memory\n");
2613 if (h
->cciss_read
== CCISS_READ_10
) {
2614 cciss_read_capacity(h
->ctlr
, logvol
, 1,
2615 &total_size
, &block_size
);
2617 cciss_read_capacity_16(h
->ctlr
, logvol
, 1,
2618 &total_size
, &block_size
);
2620 cciss_geometry_inquiry(h
->ctlr
, logvol
, 1, total_size
, block_size
,
2623 blk_queue_logical_block_size(drv
->queue
, drv
->block_size
);
2624 set_capacity(disk
, drv
->nr_blocks
);
2631 * Wait polling for a command to complete.
2632 * The memory mapped FIFO is polled for the completion.
2633 * Used only at init time, interrupts from the HBA are disabled.
2635 static unsigned long pollcomplete(int ctlr
)
2640 /* Wait (up to 20 seconds) for a command to complete */
2642 for (i
= 20 * HZ
; i
> 0; i
--) {
2643 done
= hba
[ctlr
]->access
.command_completed(hba
[ctlr
]);
2644 if (done
== FIFO_EMPTY
)
2645 schedule_timeout_uninterruptible(1);
2649 /* Invalid address to tell caller we ran out of time */
2653 /* Send command c to controller h and poll for it to complete.
2654 * Turns interrupts off on the board. Used at driver init time
2655 * and during SCSI error recovery.
2657 static int sendcmd_core(ctlr_info_t
*h
, CommandList_struct
*c
)
2660 unsigned long complete
;
2661 int status
= IO_ERROR
;
2662 u64bit buff_dma_handle
;
2666 /* Disable interrupt on the board. */
2667 h
->access
.set_intr_mask(h
, CCISS_INTR_OFF
);
2669 /* Make sure there is room in the command FIFO */
2670 /* Actually it should be completely empty at this time */
2671 /* unless we are in here doing error handling for the scsi */
2672 /* tape side of the driver. */
2673 for (i
= 200000; i
> 0; i
--) {
2674 /* if fifo isn't full go */
2675 if (!(h
->access
.fifo_full(h
)))
2678 printk(KERN_WARNING
"cciss cciss%d: SendCmd FIFO full,"
2679 " waiting!\n", h
->ctlr
);
2681 h
->access
.submit_command(h
, c
); /* Send the cmd */
2683 complete
= pollcomplete(h
->ctlr
);
2686 printk(KERN_DEBUG
"cciss: command completed\n");
2687 #endif /* CCISS_DEBUG */
2689 if (complete
== 1) {
2691 "cciss cciss%d: SendCmd Timeout out, "
2692 "No command list address returned!\n", h
->ctlr
);
2697 /* Make sure it's the command we're expecting. */
2698 if ((complete
& ~CISS_ERROR_BIT
) != c
->busaddr
) {
2699 printk(KERN_WARNING
"cciss%d: Unexpected command "
2700 "completion.\n", h
->ctlr
);
2704 /* It is our command. If no error, we're done. */
2705 if (!(complete
& CISS_ERROR_BIT
)) {
2710 /* There is an error... */
2712 /* if data overrun or underun on Report command ignore it */
2713 if (((c
->Request
.CDB
[0] == CISS_REPORT_LOG
) ||
2714 (c
->Request
.CDB
[0] == CISS_REPORT_PHYS
) ||
2715 (c
->Request
.CDB
[0] == CISS_INQUIRY
)) &&
2716 ((c
->err_info
->CommandStatus
== CMD_DATA_OVERRUN
) ||
2717 (c
->err_info
->CommandStatus
== CMD_DATA_UNDERRUN
))) {
2718 complete
= c
->busaddr
;
2723 if (c
->err_info
->CommandStatus
== CMD_UNSOLICITED_ABORT
) {
2724 printk(KERN_WARNING
"cciss%d: unsolicited abort %p\n",
2726 if (c
->retry_count
< MAX_CMD_RETRIES
) {
2727 printk(KERN_WARNING
"cciss%d: retrying %p\n",
2730 /* erase the old error information */
2731 memset(c
->err_info
, 0, sizeof(c
->err_info
));
2734 printk(KERN_WARNING
"cciss%d: retried %p too many "
2735 "times\n", h
->ctlr
, c
);
2740 if (c
->err_info
->CommandStatus
== CMD_UNABORTABLE
) {
2741 printk(KERN_WARNING
"cciss%d: command could not be "
2742 "aborted.\n", h
->ctlr
);
2747 if (c
->err_info
->CommandStatus
== CMD_TARGET_STATUS
) {
2748 status
= check_target_status(h
, c
);
2752 printk(KERN_WARNING
"cciss%d: sendcmd error\n", h
->ctlr
);
2753 printk(KERN_WARNING
"cmd = 0x%02x, CommandStatus = 0x%02x\n",
2754 c
->Request
.CDB
[0], c
->err_info
->CommandStatus
);
2760 /* unlock the data buffer from DMA */
2761 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2762 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2763 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2764 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2769 * Send a command to the controller, and wait for it to complete.
2770 * Used at init time, and during SCSI error recovery.
2772 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
2773 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
)
2775 CommandList_struct
*c
;
2778 c
= cmd_alloc(hba
[ctlr
], 1);
2780 printk(KERN_WARNING
"cciss: unable to get memory");
2783 status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, page_code
,
2784 scsi3addr
, cmd_type
);
2785 if (status
== IO_OK
)
2786 status
= sendcmd_core(hba
[ctlr
], c
);
2787 cmd_free(hba
[ctlr
], c
, 1);
2792 * Map (physical) PCI mem into (virtual) kernel space
2794 static void __iomem
*remap_pci_mem(ulong base
, ulong size
)
2796 ulong page_base
= ((ulong
) base
) & PAGE_MASK
;
2797 ulong page_offs
= ((ulong
) base
) - page_base
;
2798 void __iomem
*page_remapped
= ioremap(page_base
, page_offs
+ size
);
2800 return page_remapped
? (page_remapped
+ page_offs
) : NULL
;
2804 * Takes jobs of the Q and sends them to the hardware, then puts it on
2805 * the Q to wait for completion.
2807 static void start_io(ctlr_info_t
*h
)
2809 CommandList_struct
*c
;
2811 while (!hlist_empty(&h
->reqQ
)) {
2812 c
= hlist_entry(h
->reqQ
.first
, CommandList_struct
, list
);
2813 /* can't do anything if fifo is full */
2814 if ((h
->access
.fifo_full(h
))) {
2815 printk(KERN_WARNING
"cciss: fifo full\n");
2819 /* Get the first entry from the Request Q */
2823 /* Tell the controller execute command */
2824 h
->access
.submit_command(h
, c
);
2826 /* Put job onto the completed Q */
2831 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2832 /* Zeros out the error record and then resends the command back */
2833 /* to the controller */
2834 static inline void resend_cciss_cmd(ctlr_info_t
*h
, CommandList_struct
*c
)
2836 /* erase the old error information */
2837 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2839 /* add it to software queue and then send it to the controller */
2842 if (h
->Qdepth
> h
->maxQsinceinit
)
2843 h
->maxQsinceinit
= h
->Qdepth
;
2848 static inline unsigned int make_status_bytes(unsigned int scsi_status_byte
,
2849 unsigned int msg_byte
, unsigned int host_byte
,
2850 unsigned int driver_byte
)
2852 /* inverse of macros in scsi.h */
2853 return (scsi_status_byte
& 0xff) |
2854 ((msg_byte
& 0xff) << 8) |
2855 ((host_byte
& 0xff) << 16) |
2856 ((driver_byte
& 0xff) << 24);
2859 static inline int evaluate_target_status(ctlr_info_t
*h
,
2860 CommandList_struct
*cmd
, int *retry_cmd
)
2862 unsigned char sense_key
;
2863 unsigned char status_byte
, msg_byte
, host_byte
, driver_byte
;
2867 /* If we get in here, it means we got "target status", that is, scsi status */
2868 status_byte
= cmd
->err_info
->ScsiStatus
;
2869 driver_byte
= DRIVER_OK
;
2870 msg_byte
= cmd
->err_info
->CommandStatus
; /* correct? seems too device specific */
2872 if (blk_pc_request(cmd
->rq
))
2873 host_byte
= DID_PASSTHROUGH
;
2877 error_value
= make_status_bytes(status_byte
, msg_byte
,
2878 host_byte
, driver_byte
);
2880 if (cmd
->err_info
->ScsiStatus
!= SAM_STAT_CHECK_CONDITION
) {
2881 if (!blk_pc_request(cmd
->rq
))
2882 printk(KERN_WARNING
"cciss: cmd %p "
2883 "has SCSI Status 0x%x\n",
2884 cmd
, cmd
->err_info
->ScsiStatus
);
2888 /* check the sense key */
2889 sense_key
= 0xf & cmd
->err_info
->SenseInfo
[2];
2890 /* no status or recovered error */
2891 if (((sense_key
== 0x0) || (sense_key
== 0x1)) && !blk_pc_request(cmd
->rq
))
2894 if (check_for_unit_attention(h
, cmd
)) {
2895 *retry_cmd
= !blk_pc_request(cmd
->rq
);
2899 if (!blk_pc_request(cmd
->rq
)) { /* Not SG_IO or similar? */
2900 if (error_value
!= 0)
2901 printk(KERN_WARNING
"cciss: cmd %p has CHECK CONDITION"
2902 " sense key = 0x%x\n", cmd
, sense_key
);
2906 /* SG_IO or similar, copy sense data back */
2907 if (cmd
->rq
->sense
) {
2908 if (cmd
->rq
->sense_len
> cmd
->err_info
->SenseLen
)
2909 cmd
->rq
->sense_len
= cmd
->err_info
->SenseLen
;
2910 memcpy(cmd
->rq
->sense
, cmd
->err_info
->SenseInfo
,
2911 cmd
->rq
->sense_len
);
2913 cmd
->rq
->sense_len
= 0;
2918 /* checks the status of the job and calls complete buffers to mark all
2919 * buffers for the completed job. Note that this function does not need
2920 * to hold the hba/queue lock.
2922 static inline void complete_command(ctlr_info_t
*h
, CommandList_struct
*cmd
,
2926 struct request
*rq
= cmd
->rq
;
2931 rq
->errors
= make_status_bytes(0, 0, 0, DRIVER_TIMEOUT
);
2933 if (cmd
->err_info
->CommandStatus
== 0) /* no error has occurred */
2934 goto after_error_processing
;
2936 switch (cmd
->err_info
->CommandStatus
) {
2937 case CMD_TARGET_STATUS
:
2938 rq
->errors
= evaluate_target_status(h
, cmd
, &retry_cmd
);
2940 case CMD_DATA_UNDERRUN
:
2941 if (blk_fs_request(cmd
->rq
)) {
2942 printk(KERN_WARNING
"cciss: cmd %p has"
2943 " completed with data underrun "
2945 cmd
->rq
->resid_len
= cmd
->err_info
->ResidualCnt
;
2948 case CMD_DATA_OVERRUN
:
2949 if (blk_fs_request(cmd
->rq
))
2950 printk(KERN_WARNING
"cciss: cmd %p has"
2951 " completed with data overrun "
2955 printk(KERN_WARNING
"cciss: cmd %p is "
2956 "reported invalid\n", cmd
);
2957 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2958 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2959 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
2961 case CMD_PROTOCOL_ERR
:
2962 printk(KERN_WARNING
"cciss: cmd %p has "
2963 "protocol error \n", cmd
);
2964 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2965 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2966 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
2968 case CMD_HARDWARE_ERR
:
2969 printk(KERN_WARNING
"cciss: cmd %p had "
2970 " hardware error\n", cmd
);
2971 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2972 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2973 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
2975 case CMD_CONNECTION_LOST
:
2976 printk(KERN_WARNING
"cciss: cmd %p had "
2977 "connection lost\n", cmd
);
2978 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2979 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2980 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
2983 printk(KERN_WARNING
"cciss: cmd %p was "
2985 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2986 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2987 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ABORT
);
2989 case CMD_ABORT_FAILED
:
2990 printk(KERN_WARNING
"cciss: cmd %p reports "
2991 "abort failed\n", cmd
);
2992 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
2993 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
2994 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
2996 case CMD_UNSOLICITED_ABORT
:
2997 printk(KERN_WARNING
"cciss%d: unsolicited "
2998 "abort %p\n", h
->ctlr
, cmd
);
2999 if (cmd
->retry_count
< MAX_CMD_RETRIES
) {
3002 "cciss%d: retrying %p\n", h
->ctlr
, cmd
);
3006 "cciss%d: %p retried too "
3007 "many times\n", h
->ctlr
, cmd
);
3008 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3009 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3010 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ABORT
);
3013 printk(KERN_WARNING
"cciss: cmd %p timedout\n", cmd
);
3014 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3015 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3016 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3019 printk(KERN_WARNING
"cciss: cmd %p returned "
3020 "unknown status %x\n", cmd
,
3021 cmd
->err_info
->CommandStatus
);
3022 rq
->errors
= make_status_bytes(SAM_STAT_GOOD
,
3023 cmd
->err_info
->CommandStatus
, DRIVER_OK
,
3024 blk_pc_request(cmd
->rq
) ? DID_PASSTHROUGH
: DID_ERROR
);
3027 after_error_processing
:
3029 /* We need to return this command */
3031 resend_cciss_cmd(h
, cmd
);
3034 cmd
->rq
->completion_data
= cmd
;
3035 blk_complete_request(cmd
->rq
);
3039 * Get a request and submit it to the controller.
3041 static void do_cciss_request(struct request_queue
*q
)
3043 ctlr_info_t
*h
= q
->queuedata
;
3044 CommandList_struct
*c
;
3047 struct request
*creq
;
3049 struct scatterlist tmp_sg
[MAXSGENTRIES
];
3050 drive_info_struct
*drv
;
3053 /* We call start_io here in case there is a command waiting on the
3054 * queue that has not been sent.
3056 if (blk_queue_plugged(q
))
3060 creq
= blk_peek_request(q
);
3064 BUG_ON(creq
->nr_phys_segments
> MAXSGENTRIES
);
3066 if ((c
= cmd_alloc(h
, 1)) == NULL
)
3069 blk_start_request(creq
);
3071 spin_unlock_irq(q
->queue_lock
);
3073 c
->cmd_type
= CMD_RWREQ
;
3076 /* fill in the request */
3077 drv
= creq
->rq_disk
->private_data
;
3078 c
->Header
.ReplyQueue
= 0; // unused in simple mode
3079 /* got command from pool, so use the command block index instead */
3080 /* for direct lookups. */
3081 /* The first 2 bits are reserved for controller error reporting. */
3082 c
->Header
.Tag
.lower
= (c
->cmdindex
<< 3);
3083 c
->Header
.Tag
.lower
|= 0x04; /* flag for direct lookup. */
3084 c
->Header
.LUN
.LogDev
.VolId
= drv
->LunID
;
3085 c
->Header
.LUN
.LogDev
.Mode
= 1;
3086 c
->Request
.CDBLen
= 10; // 12 byte commands not in FW yet;
3087 c
->Request
.Type
.Type
= TYPE_CMD
; // It is a command.
3088 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
3089 c
->Request
.Type
.Direction
=
3090 (rq_data_dir(creq
) == READ
) ? XFER_READ
: XFER_WRITE
;
3091 c
->Request
.Timeout
= 0; // Don't time out
3093 (rq_data_dir(creq
) == READ
) ? h
->cciss_read
: h
->cciss_write
;
3094 start_blk
= blk_rq_pos(creq
);
3096 printk(KERN_DEBUG
"ciss: sector =%d nr_sectors=%d\n",
3097 (int)blk_rq_pos(creq
), (int)blk_rq_sectors(creq
));
3098 #endif /* CCISS_DEBUG */
3100 sg_init_table(tmp_sg
, MAXSGENTRIES
);
3101 seg
= blk_rq_map_sg(q
, creq
, tmp_sg
);
3103 /* get the DMA records for the setup */
3104 if (c
->Request
.Type
.Direction
== XFER_READ
)
3105 dir
= PCI_DMA_FROMDEVICE
;
3107 dir
= PCI_DMA_TODEVICE
;
3109 for (i
= 0; i
< seg
; i
++) {
3110 c
->SG
[i
].Len
= tmp_sg
[i
].length
;
3111 temp64
.val
= (__u64
) pci_map_page(h
->pdev
, sg_page(&tmp_sg
[i
]),
3113 tmp_sg
[i
].length
, dir
);
3114 c
->SG
[i
].Addr
.lower
= temp64
.val32
.lower
;
3115 c
->SG
[i
].Addr
.upper
= temp64
.val32
.upper
;
3116 c
->SG
[i
].Ext
= 0; // we are not chaining
3118 /* track how many SG entries we are using */
3123 printk(KERN_DEBUG
"cciss: Submitting %u sectors in %d segments\n",
3124 blk_rq_sectors(creq
), seg
);
3125 #endif /* CCISS_DEBUG */
3127 c
->Header
.SGList
= c
->Header
.SGTotal
= seg
;
3128 if (likely(blk_fs_request(creq
))) {
3129 if(h
->cciss_read
== CCISS_READ_10
) {
3130 c
->Request
.CDB
[1] = 0;
3131 c
->Request
.CDB
[2] = (start_blk
>> 24) & 0xff; //MSB
3132 c
->Request
.CDB
[3] = (start_blk
>> 16) & 0xff;
3133 c
->Request
.CDB
[4] = (start_blk
>> 8) & 0xff;
3134 c
->Request
.CDB
[5] = start_blk
& 0xff;
3135 c
->Request
.CDB
[6] = 0; // (sect >> 24) & 0xff; MSB
3136 c
->Request
.CDB
[7] = (blk_rq_sectors(creq
) >> 8) & 0xff;
3137 c
->Request
.CDB
[8] = blk_rq_sectors(creq
) & 0xff;
3138 c
->Request
.CDB
[9] = c
->Request
.CDB
[11] = c
->Request
.CDB
[12] = 0;
3140 u32 upper32
= upper_32_bits(start_blk
);
3142 c
->Request
.CDBLen
= 16;
3143 c
->Request
.CDB
[1]= 0;
3144 c
->Request
.CDB
[2]= (upper32
>> 24) & 0xff; //MSB
3145 c
->Request
.CDB
[3]= (upper32
>> 16) & 0xff;
3146 c
->Request
.CDB
[4]= (upper32
>> 8) & 0xff;
3147 c
->Request
.CDB
[5]= upper32
& 0xff;
3148 c
->Request
.CDB
[6]= (start_blk
>> 24) & 0xff;
3149 c
->Request
.CDB
[7]= (start_blk
>> 16) & 0xff;
3150 c
->Request
.CDB
[8]= (start_blk
>> 8) & 0xff;
3151 c
->Request
.CDB
[9]= start_blk
& 0xff;
3152 c
->Request
.CDB
[10]= (blk_rq_sectors(creq
) >> 24) & 0xff;
3153 c
->Request
.CDB
[11]= (blk_rq_sectors(creq
) >> 16) & 0xff;
3154 c
->Request
.CDB
[12]= (blk_rq_sectors(creq
) >> 8) & 0xff;
3155 c
->Request
.CDB
[13]= blk_rq_sectors(creq
) & 0xff;
3156 c
->Request
.CDB
[14] = c
->Request
.CDB
[15] = 0;
3158 } else if (blk_pc_request(creq
)) {
3159 c
->Request
.CDBLen
= creq
->cmd_len
;
3160 memcpy(c
->Request
.CDB
, creq
->cmd
, BLK_MAX_CDB
);
3162 printk(KERN_WARNING
"cciss%d: bad request type %d\n", h
->ctlr
, creq
->cmd_type
);
3166 spin_lock_irq(q
->queue_lock
);
3170 if (h
->Qdepth
> h
->maxQsinceinit
)
3171 h
->maxQsinceinit
= h
->Qdepth
;
3177 /* We will already have the driver lock here so not need
3183 static inline unsigned long get_next_completion(ctlr_info_t
*h
)
3185 return h
->access
.command_completed(h
);
3188 static inline int interrupt_pending(ctlr_info_t
*h
)
3190 return h
->access
.intr_pending(h
);
3193 static inline long interrupt_not_for_us(ctlr_info_t
*h
)
3195 return (((h
->access
.intr_pending(h
) == 0) ||
3196 (h
->interrupts_enabled
== 0)));
3199 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
)
3201 ctlr_info_t
*h
= dev_id
;
3202 CommandList_struct
*c
;
3203 unsigned long flags
;
3206 if (interrupt_not_for_us(h
))
3209 * If there are completed commands in the completion queue,
3210 * we had better do something about it.
3212 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
3213 while (interrupt_pending(h
)) {
3214 while ((a
= get_next_completion(h
)) != FIFO_EMPTY
) {
3218 if (a2
>= h
->nr_cmds
) {
3220 "cciss: controller cciss%d failed, stopping.\n",
3222 fail_all_cmds(h
->ctlr
);
3226 c
= h
->cmd_pool
+ a2
;
3230 struct hlist_node
*tmp
;
3234 hlist_for_each_entry(c
, tmp
, &h
->cmpQ
, list
) {
3235 if (c
->busaddr
== a
)
3240 * If we've found the command, take it off the
3241 * completion Q and free it
3243 if (c
&& c
->busaddr
== a
) {
3245 if (c
->cmd_type
== CMD_RWREQ
) {
3246 complete_command(h
, c
, 0);
3247 } else if (c
->cmd_type
== CMD_IOCTL_PEND
) {
3248 complete(c
->waiting
);
3250 # ifdef CONFIG_CISS_SCSI_TAPE
3251 else if (c
->cmd_type
== CMD_SCSI
)
3252 complete_scsi_command(c
, 0, a1
);
3259 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
3264 * add_to_scan_list() - add controller to rescan queue
3265 * @h: Pointer to the controller.
3267 * Adds the controller to the rescan queue if not already on the queue.
3269 * returns 1 if added to the queue, 0 if skipped (could be on the
3270 * queue already, or the controller could be initializing or shutting
3273 static int add_to_scan_list(struct ctlr_info
*h
)
3275 struct ctlr_info
*test_h
;
3279 if (h
->busy_initializing
)
3282 if (!mutex_trylock(&h
->busy_shutting_down
))
3285 mutex_lock(&scan_mutex
);
3286 list_for_each_entry(test_h
, &scan_q
, scan_list
) {
3292 if (!found
&& !h
->busy_scanning
) {
3293 INIT_COMPLETION(h
->scan_wait
);
3294 list_add_tail(&h
->scan_list
, &scan_q
);
3297 mutex_unlock(&scan_mutex
);
3298 mutex_unlock(&h
->busy_shutting_down
);
3304 * remove_from_scan_list() - remove controller from rescan queue
3305 * @h: Pointer to the controller.
3307 * Removes the controller from the rescan queue if present. Blocks if
3308 * the controller is currently conducting a rescan.
3310 static void remove_from_scan_list(struct ctlr_info
*h
)
3312 struct ctlr_info
*test_h
, *tmp_h
;
3315 mutex_lock(&scan_mutex
);
3316 list_for_each_entry_safe(test_h
, tmp_h
, &scan_q
, scan_list
) {
3318 list_del(&h
->scan_list
);
3319 complete_all(&h
->scan_wait
);
3320 mutex_unlock(&scan_mutex
);
3324 if (&h
->busy_scanning
)
3326 mutex_unlock(&scan_mutex
);
3329 wait_for_completion(&h
->scan_wait
);
3333 * scan_thread() - kernel thread used to rescan controllers
3336 * A kernel thread used scan for drive topology changes on
3337 * controllers. The thread processes only one controller at a time
3338 * using a queue. Controllers are added to the queue using
3339 * add_to_scan_list() and removed from the queue either after done
3340 * processing or using remove_from_scan_list().
3344 static int scan_thread(void *data
)
3346 struct ctlr_info
*h
;
3349 set_current_state(TASK_INTERRUPTIBLE
);
3351 if (kthread_should_stop())
3355 mutex_lock(&scan_mutex
);
3356 if (list_empty(&scan_q
)) {
3357 mutex_unlock(&scan_mutex
);
3361 h
= list_entry(scan_q
.next
,
3364 list_del(&h
->scan_list
);
3365 h
->busy_scanning
= 1;
3366 mutex_unlock(&scan_mutex
);
3369 rebuild_lun_table(h
, 0);
3370 complete_all(&h
->scan_wait
);
3371 mutex_lock(&scan_mutex
);
3372 h
->busy_scanning
= 0;
3373 mutex_unlock(&scan_mutex
);
3381 static int check_for_unit_attention(ctlr_info_t
*h
, CommandList_struct
*c
)
3383 if (c
->err_info
->SenseInfo
[2] != UNIT_ATTENTION
)
3386 switch (c
->err_info
->SenseInfo
[12]) {
3388 printk(KERN_WARNING
"cciss%d: a state change "
3389 "detected, command retried\n", h
->ctlr
);
3393 printk(KERN_WARNING
"cciss%d: LUN failure "
3394 "detected, action required\n", h
->ctlr
);
3397 case REPORT_LUNS_CHANGED
:
3398 printk(KERN_WARNING
"cciss%d: report LUN data "
3399 "changed\n", h
->ctlr
);
3400 add_to_scan_list(h
);
3401 wake_up_process(cciss_scan_thread
);
3404 case POWER_OR_RESET
:
3405 printk(KERN_WARNING
"cciss%d: a power on "
3406 "or device reset detected\n", h
->ctlr
);
3409 case UNIT_ATTENTION_CLEARED
:
3410 printk(KERN_WARNING
"cciss%d: unit attention "
3411 "cleared by another initiator\n", h
->ctlr
);
3415 printk(KERN_WARNING
"cciss%d: unknown "
3416 "unit attention detected\n", h
->ctlr
);
3422 * We cannot read the structure directly, for portability we must use
3424 * This is for debug only.
3427 static void print_cfg_table(CfgTable_struct
*tb
)
3432 printk("Controller Configuration information\n");
3433 printk("------------------------------------\n");
3434 for (i
= 0; i
< 4; i
++)
3435 temp_name
[i
] = readb(&(tb
->Signature
[i
]));
3436 temp_name
[4] = '\0';
3437 printk(" Signature = %s\n", temp_name
);
3438 printk(" Spec Number = %d\n", readl(&(tb
->SpecValence
)));
3439 printk(" Transport methods supported = 0x%x\n",
3440 readl(&(tb
->TransportSupport
)));
3441 printk(" Transport methods active = 0x%x\n",
3442 readl(&(tb
->TransportActive
)));
3443 printk(" Requested transport Method = 0x%x\n",
3444 readl(&(tb
->HostWrite
.TransportRequest
)));
3445 printk(" Coalesce Interrupt Delay = 0x%x\n",
3446 readl(&(tb
->HostWrite
.CoalIntDelay
)));
3447 printk(" Coalesce Interrupt Count = 0x%x\n",
3448 readl(&(tb
->HostWrite
.CoalIntCount
)));
3449 printk(" Max outstanding commands = 0x%d\n",
3450 readl(&(tb
->CmdsOutMax
)));
3451 printk(" Bus Types = 0x%x\n", readl(&(tb
->BusTypes
)));
3452 for (i
= 0; i
< 16; i
++)
3453 temp_name
[i
] = readb(&(tb
->ServerName
[i
]));
3454 temp_name
[16] = '\0';
3455 printk(" Server Name = %s\n", temp_name
);
3456 printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb
->HeartBeat
)));
3458 #endif /* CCISS_DEBUG */
3460 static int find_PCI_BAR_index(struct pci_dev
*pdev
, unsigned long pci_bar_addr
)
3462 int i
, offset
, mem_type
, bar_type
;
3463 if (pci_bar_addr
== PCI_BASE_ADDRESS_0
) /* looking for BAR zero? */
3466 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3467 bar_type
= pci_resource_flags(pdev
, i
) & PCI_BASE_ADDRESS_SPACE
;
3468 if (bar_type
== PCI_BASE_ADDRESS_SPACE_IO
)
3471 mem_type
= pci_resource_flags(pdev
, i
) &
3472 PCI_BASE_ADDRESS_MEM_TYPE_MASK
;
3474 case PCI_BASE_ADDRESS_MEM_TYPE_32
:
3475 case PCI_BASE_ADDRESS_MEM_TYPE_1M
:
3476 offset
+= 4; /* 32 bit */
3478 case PCI_BASE_ADDRESS_MEM_TYPE_64
:
3481 default: /* reserved in PCI 2.2 */
3483 "Base address is invalid\n");
3488 if (offset
== pci_bar_addr
- PCI_BASE_ADDRESS_0
)
3494 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
3495 * controllers that are capable. If not, we use IO-APIC mode.
3498 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*c
,
3499 struct pci_dev
*pdev
, __u32 board_id
)
3501 #ifdef CONFIG_PCI_MSI
3503 struct msix_entry cciss_msix_entries
[4] = { {0, 0}, {0, 1},
3507 /* Some boards advertise MSI but don't really support it */
3508 if ((board_id
== 0x40700E11) ||
3509 (board_id
== 0x40800E11) ||
3510 (board_id
== 0x40820E11) || (board_id
== 0x40830E11))
3511 goto default_int_mode
;
3513 if (pci_find_capability(pdev
, PCI_CAP_ID_MSIX
)) {
3514 err
= pci_enable_msix(pdev
, cciss_msix_entries
, 4);
3516 c
->intr
[0] = cciss_msix_entries
[0].vector
;
3517 c
->intr
[1] = cciss_msix_entries
[1].vector
;
3518 c
->intr
[2] = cciss_msix_entries
[2].vector
;
3519 c
->intr
[3] = cciss_msix_entries
[3].vector
;
3524 printk(KERN_WARNING
"cciss: only %d MSI-X vectors "
3525 "available\n", err
);
3526 goto default_int_mode
;
3528 printk(KERN_WARNING
"cciss: MSI-X init failed %d\n",
3530 goto default_int_mode
;
3533 if (pci_find_capability(pdev
, PCI_CAP_ID_MSI
)) {
3534 if (!pci_enable_msi(pdev
)) {
3537 printk(KERN_WARNING
"cciss: MSI init failed\n");
3541 #endif /* CONFIG_PCI_MSI */
3542 /* if we get here we're going to use the default interrupt mode */
3543 c
->intr
[SIMPLE_MODE_INT
] = pdev
->irq
;
3547 static int __devinit
cciss_pci_init(ctlr_info_t
*c
, struct pci_dev
*pdev
)
3549 ushort subsystem_vendor_id
, subsystem_device_id
, command
;
3550 __u32 board_id
, scratchpad
= 0;
3552 __u32 cfg_base_addr
;
3553 __u64 cfg_base_addr_index
;
3556 /* check to see if controller has been disabled */
3557 /* BEFORE trying to enable it */
3558 (void)pci_read_config_word(pdev
, PCI_COMMAND
, &command
);
3559 if (!(command
& 0x02)) {
3561 "cciss: controller appears to be disabled\n");
3565 err
= pci_enable_device(pdev
);
3567 printk(KERN_ERR
"cciss: Unable to Enable PCI device\n");
3571 err
= pci_request_regions(pdev
, "cciss");
3573 printk(KERN_ERR
"cciss: Cannot obtain PCI resources, "
3578 subsystem_vendor_id
= pdev
->subsystem_vendor
;
3579 subsystem_device_id
= pdev
->subsystem_device
;
3580 board_id
= (((__u32
) (subsystem_device_id
<< 16) & 0xffff0000) |
3581 subsystem_vendor_id
);
3584 printk("command = %x\n", command
);
3585 printk("irq = %x\n", pdev
->irq
);
3586 printk("board_id = %x\n", board_id
);
3587 #endif /* CCISS_DEBUG */
3589 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
3590 * else we use the IO-APIC interrupt assigned to us by system ROM.
3592 cciss_interrupt_mode(c
, pdev
, board_id
);
3594 /* find the memory BAR */
3595 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
3596 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
)
3599 if (i
== DEVICE_COUNT_RESOURCE
) {
3600 printk(KERN_WARNING
"cciss: No memory BAR found\n");
3602 goto err_out_free_res
;
3605 c
->paddr
= pci_resource_start(pdev
, i
); /* addressing mode bits
3610 printk("address 0 = %lx\n", c
->paddr
);
3611 #endif /* CCISS_DEBUG */
3612 c
->vaddr
= remap_pci_mem(c
->paddr
, 0x250);
3614 /* Wait for the board to become ready. (PCI hotplug needs this.)
3615 * We poll for up to 120 secs, once per 100ms. */
3616 for (i
= 0; i
< 1200; i
++) {
3617 scratchpad
= readl(c
->vaddr
+ SA5_SCRATCHPAD_OFFSET
);
3618 if (scratchpad
== CCISS_FIRMWARE_READY
)
3620 set_current_state(TASK_INTERRUPTIBLE
);
3621 schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
3623 if (scratchpad
!= CCISS_FIRMWARE_READY
) {
3624 printk(KERN_WARNING
"cciss: Board not ready. Timed out.\n");
3626 goto err_out_free_res
;
3629 /* get the address index number */
3630 cfg_base_addr
= readl(c
->vaddr
+ SA5_CTCFG_OFFSET
);
3631 cfg_base_addr
&= (__u32
) 0x0000ffff;
3633 printk("cfg base address = %x\n", cfg_base_addr
);
3634 #endif /* CCISS_DEBUG */
3635 cfg_base_addr_index
= find_PCI_BAR_index(pdev
, cfg_base_addr
);
3637 printk("cfg base address index = %llx\n",
3638 (unsigned long long)cfg_base_addr_index
);
3639 #endif /* CCISS_DEBUG */
3640 if (cfg_base_addr_index
== -1) {
3641 printk(KERN_WARNING
"cciss: Cannot find cfg_base_addr_index\n");
3643 goto err_out_free_res
;
3646 cfg_offset
= readl(c
->vaddr
+ SA5_CTMEM_OFFSET
);
3648 printk("cfg offset = %llx\n", (unsigned long long)cfg_offset
);
3649 #endif /* CCISS_DEBUG */
3650 c
->cfgtable
= remap_pci_mem(pci_resource_start(pdev
,
3651 cfg_base_addr_index
) +
3652 cfg_offset
, sizeof(CfgTable_struct
));
3653 c
->board_id
= board_id
;
3656 print_cfg_table(c
->cfgtable
);
3657 #endif /* CCISS_DEBUG */
3659 /* Some controllers support Zero Memory Raid (ZMR).
3660 * When configured in ZMR mode the number of supported
3661 * commands drops to 64. So instead of just setting an
3662 * arbitrary value we make the driver a little smarter.
3663 * We read the config table to tell us how many commands
3664 * are supported on the controller then subtract 4 to
3665 * leave a little room for ioctl calls.
3667 c
->max_commands
= readl(&(c
->cfgtable
->CmdsOutMax
));
3668 for (i
= 0; i
< ARRAY_SIZE(products
); i
++) {
3669 if (board_id
== products
[i
].board_id
) {
3670 c
->product_name
= products
[i
].product_name
;
3671 c
->access
= *(products
[i
].access
);
3672 c
->nr_cmds
= c
->max_commands
- 4;
3676 if ((readb(&c
->cfgtable
->Signature
[0]) != 'C') ||
3677 (readb(&c
->cfgtable
->Signature
[1]) != 'I') ||
3678 (readb(&c
->cfgtable
->Signature
[2]) != 'S') ||
3679 (readb(&c
->cfgtable
->Signature
[3]) != 'S')) {
3680 printk("Does not appear to be a valid CISS config table\n");
3682 goto err_out_free_res
;
3684 /* We didn't find the controller in our list. We know the
3685 * signature is valid. If it's an HP device let's try to
3686 * bind to the device and fire it up. Otherwise we bail.
3688 if (i
== ARRAY_SIZE(products
)) {
3689 if (subsystem_vendor_id
== PCI_VENDOR_ID_HP
) {
3690 c
->product_name
= products
[i
-1].product_name
;
3691 c
->access
= *(products
[i
-1].access
);
3692 c
->nr_cmds
= c
->max_commands
- 4;
3693 printk(KERN_WARNING
"cciss: This is an unknown "
3694 "Smart Array controller.\n"
3695 "cciss: Please update to the latest driver "
3696 "available from www.hp.com.\n");
3698 printk(KERN_WARNING
"cciss: Sorry, I don't know how"
3699 " to access the Smart Array controller %08lx\n"
3700 , (unsigned long)board_id
);
3702 goto err_out_free_res
;
3707 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3709 prefetch
= readl(&(c
->cfgtable
->SCSI_Prefetch
));
3711 writel(prefetch
, &(c
->cfgtable
->SCSI_Prefetch
));
3715 /* Disabling DMA prefetch and refetch for the P600.
3716 * An ASIC bug may result in accesses to invalid memory addresses.
3717 * We've disabled prefetch for some time now. Testing with XEN
3718 * kernels revealed a bug in the refetch if dom0 resides on a P600.
3720 if(board_id
== 0x3225103C) {
3723 dma_prefetch
= readl(c
->vaddr
+ I2O_DMA1_CFG
);
3724 dma_prefetch
|= 0x8000;
3725 writel(dma_prefetch
, c
->vaddr
+ I2O_DMA1_CFG
);
3726 pci_read_config_dword(pdev
, PCI_COMMAND_PARITY
, &dma_refetch
);
3728 pci_write_config_dword(pdev
, PCI_COMMAND_PARITY
, dma_refetch
);
3732 printk("Trying to put board into Simple mode\n");
3733 #endif /* CCISS_DEBUG */
3734 c
->max_commands
= readl(&(c
->cfgtable
->CmdsOutMax
));
3735 /* Update the field, and then ring the doorbell */
3736 writel(CFGTBL_Trans_Simple
, &(c
->cfgtable
->HostWrite
.TransportRequest
));
3737 writel(CFGTBL_ChangeReq
, c
->vaddr
+ SA5_DOORBELL
);
3739 /* under certain very rare conditions, this can take awhile.
3740 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3741 * as we enter this code.) */
3742 for (i
= 0; i
< MAX_CONFIG_WAIT
; i
++) {
3743 if (!(readl(c
->vaddr
+ SA5_DOORBELL
) & CFGTBL_ChangeReq
))
3745 /* delay and try again */
3746 set_current_state(TASK_INTERRUPTIBLE
);
3747 schedule_timeout(msecs_to_jiffies(1));
3751 printk(KERN_DEBUG
"I counter got to %d %x\n", i
,
3752 readl(c
->vaddr
+ SA5_DOORBELL
));
3753 #endif /* CCISS_DEBUG */
3755 print_cfg_table(c
->cfgtable
);
3756 #endif /* CCISS_DEBUG */
3758 if (!(readl(&(c
->cfgtable
->TransportActive
)) & CFGTBL_Trans_Simple
)) {
3759 printk(KERN_WARNING
"cciss: unable to get board into"
3762 goto err_out_free_res
;
3768 * Deliberately omit pci_disable_device(): it does something nasty to
3769 * Smart Array controllers that pci_enable_device does not undo
3771 pci_release_regions(pdev
);
3775 /* Function to find the first free pointer into our hba[] array
3776 * Returns -1 if no free entries are left.
3778 static int alloc_cciss_hba(void)
3782 for (i
= 0; i
< MAX_CTLR
; i
++) {
3786 p
= kzalloc(sizeof(ctlr_info_t
), GFP_KERNEL
);
3793 printk(KERN_WARNING
"cciss: This driver supports a maximum"
3794 " of %d controllers.\n", MAX_CTLR
);
3797 printk(KERN_ERR
"cciss: out of memory.\n");
3801 static void free_hba(int i
)
3803 ctlr_info_t
*p
= hba
[i
];
3807 for (n
= 0; n
< CISS_MAX_LUN
; n
++)
3808 put_disk(p
->gendisk
[n
]);
3812 /* Send a message CDB to the firmware. */
3813 static __devinit
int cciss_message(struct pci_dev
*pdev
, unsigned char opcode
, unsigned char type
)
3816 CommandListHeader_struct CommandHeader
;
3817 RequestBlock_struct Request
;
3818 ErrDescriptor_struct ErrorDescriptor
;
3820 static const size_t cmd_sz
= sizeof(Command
) + sizeof(ErrorInfo_struct
);
3823 uint32_t paddr32
, tag
;
3824 void __iomem
*vaddr
;
3827 vaddr
= ioremap_nocache(pci_resource_start(pdev
, 0), pci_resource_len(pdev
, 0));
3831 /* The Inbound Post Queue only accepts 32-bit physical addresses for the
3832 CCISS commands, so they must be allocated from the lower 4GiB of
3834 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
3840 cmd
= pci_alloc_consistent(pdev
, cmd_sz
, &paddr64
);
3846 /* This must fit, because of the 32-bit consistent DMA mask. Also,
3847 although there's no guarantee, we assume that the address is at
3848 least 4-byte aligned (most likely, it's page-aligned). */
3851 cmd
->CommandHeader
.ReplyQueue
= 0;
3852 cmd
->CommandHeader
.SGList
= 0;
3853 cmd
->CommandHeader
.SGTotal
= 0;
3854 cmd
->CommandHeader
.Tag
.lower
= paddr32
;
3855 cmd
->CommandHeader
.Tag
.upper
= 0;
3856 memset(&cmd
->CommandHeader
.LUN
.LunAddrBytes
, 0, 8);
3858 cmd
->Request
.CDBLen
= 16;
3859 cmd
->Request
.Type
.Type
= TYPE_MSG
;
3860 cmd
->Request
.Type
.Attribute
= ATTR_HEADOFQUEUE
;
3861 cmd
->Request
.Type
.Direction
= XFER_NONE
;
3862 cmd
->Request
.Timeout
= 0; /* Don't time out */
3863 cmd
->Request
.CDB
[0] = opcode
;
3864 cmd
->Request
.CDB
[1] = type
;
3865 memset(&cmd
->Request
.CDB
[2], 0, 14); /* the rest of the CDB is reserved */
3867 cmd
->ErrorDescriptor
.Addr
.lower
= paddr32
+ sizeof(Command
);
3868 cmd
->ErrorDescriptor
.Addr
.upper
= 0;
3869 cmd
->ErrorDescriptor
.Len
= sizeof(ErrorInfo_struct
);
3871 writel(paddr32
, vaddr
+ SA5_REQUEST_PORT_OFFSET
);
3873 for (i
= 0; i
< 10; i
++) {
3874 tag
= readl(vaddr
+ SA5_REPLY_PORT_OFFSET
);
3875 if ((tag
& ~3) == paddr32
)
3877 schedule_timeout_uninterruptible(HZ
);
3882 /* we leak the DMA buffer here ... no choice since the controller could
3883 still complete the command. */
3885 printk(KERN_ERR
"cciss: controller message %02x:%02x timed out\n",
3890 pci_free_consistent(pdev
, cmd_sz
, cmd
, paddr64
);
3893 printk(KERN_ERR
"cciss: controller message %02x:%02x failed\n",
3898 printk(KERN_INFO
"cciss: controller message %02x:%02x succeeded\n",
3903 #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
3904 #define cciss_noop(p) cciss_message(p, 3, 0)
3906 static __devinit
int cciss_reset_msi(struct pci_dev
*pdev
)
3908 /* the #defines are stolen from drivers/pci/msi.h. */
3909 #define msi_control_reg(base) (base + PCI_MSI_FLAGS)
3910 #define PCI_MSIX_FLAGS_ENABLE (1 << 15)
3915 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSI
);
3917 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
3918 if (control
& PCI_MSI_FLAGS_ENABLE
) {
3919 printk(KERN_INFO
"cciss: resetting MSI\n");
3920 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSI_FLAGS_ENABLE
);
3924 pos
= pci_find_capability(pdev
, PCI_CAP_ID_MSIX
);
3926 pci_read_config_word(pdev
, msi_control_reg(pos
), &control
);
3927 if (control
& PCI_MSIX_FLAGS_ENABLE
) {
3928 printk(KERN_INFO
"cciss: resetting MSI-X\n");
3929 pci_write_config_word(pdev
, msi_control_reg(pos
), control
& ~PCI_MSIX_FLAGS_ENABLE
);
3936 /* This does a hard reset of the controller using PCI power management
3938 static __devinit
int cciss_hard_reset_controller(struct pci_dev
*pdev
)
3940 u16 pmcsr
, saved_config_space
[32];
3943 printk(KERN_INFO
"cciss: using PCI PM to reset controller\n");
3945 /* This is very nearly the same thing as
3947 pci_save_state(pci_dev);
3948 pci_set_power_state(pci_dev, PCI_D3hot);
3949 pci_set_power_state(pci_dev, PCI_D0);
3950 pci_restore_state(pci_dev);
3952 but we can't use these nice canned kernel routines on
3953 kexec, because they also check the MSI/MSI-X state in PCI
3954 configuration space and do the wrong thing when it is
3955 set/cleared. Also, the pci_save/restore_state functions
3956 violate the ordering requirements for restoring the
3957 configuration space from the CCISS document (see the
3958 comment below). So we roll our own .... */
3960 for (i
= 0; i
< 32; i
++)
3961 pci_read_config_word(pdev
, 2*i
, &saved_config_space
[i
]);
3963 pos
= pci_find_capability(pdev
, PCI_CAP_ID_PM
);
3965 printk(KERN_ERR
"cciss_reset_controller: PCI PM not supported\n");
3969 /* Quoting from the Open CISS Specification: "The Power
3970 * Management Control/Status Register (CSR) controls the power
3971 * state of the device. The normal operating state is D0,
3972 * CSR=00h. The software off state is D3, CSR=03h. To reset
3973 * the controller, place the interface device in D3 then to
3974 * D0, this causes a secondary PCI reset which will reset the
3977 /* enter the D3hot power management state */
3978 pci_read_config_word(pdev
, pos
+ PCI_PM_CTRL
, &pmcsr
);
3979 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
3981 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
3983 schedule_timeout_uninterruptible(HZ
>> 1);
3985 /* enter the D0 power management state */
3986 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
3988 pci_write_config_word(pdev
, pos
+ PCI_PM_CTRL
, pmcsr
);
3990 schedule_timeout_uninterruptible(HZ
>> 1);
3992 /* Restore the PCI configuration space. The Open CISS
3993 * Specification says, "Restore the PCI Configuration
3994 * Registers, offsets 00h through 60h. It is important to
3995 * restore the command register, 16-bits at offset 04h,
3996 * last. Do not restore the configuration status register,
3997 * 16-bits at offset 06h." Note that the offset is 2*i. */
3998 for (i
= 0; i
< 32; i
++) {
3999 if (i
== 2 || i
== 3)
4001 pci_write_config_word(pdev
, 2*i
, saved_config_space
[i
]);
4004 pci_write_config_word(pdev
, 4, saved_config_space
[2]);
4010 * This is it. Find all the controllers and register them. I really hate
4011 * stealing all these major device numbers.
4012 * returns the number of block devices registered.
4014 static int __devinit
cciss_init_one(struct pci_dev
*pdev
,
4015 const struct pci_device_id
*ent
)
4020 int dac
, return_code
;
4021 InquiryData_struct
*inq_buff
;
4023 if (reset_devices
) {
4024 /* Reset the controller with a PCI power-cycle */
4025 if (cciss_hard_reset_controller(pdev
) || cciss_reset_msi(pdev
))
4028 /* Now try to get the controller to respond to a no-op. Some
4029 devices (notably the HP Smart Array 5i Controller) need
4030 up to 30 seconds to respond. */
4031 for (i
=0; i
<30; i
++) {
4032 if (cciss_noop(pdev
) == 0)
4035 schedule_timeout_uninterruptible(HZ
);
4038 printk(KERN_ERR
"cciss: controller seems dead\n");
4043 i
= alloc_cciss_hba();
4047 hba
[i
]->busy_initializing
= 1;
4048 INIT_HLIST_HEAD(&hba
[i
]->cmpQ
);
4049 INIT_HLIST_HEAD(&hba
[i
]->reqQ
);
4050 mutex_init(&hba
[i
]->busy_shutting_down
);
4052 if (cciss_pci_init(hba
[i
], pdev
) != 0)
4055 sprintf(hba
[i
]->devname
, "cciss%d", i
);
4057 hba
[i
]->pdev
= pdev
;
4059 init_completion(&hba
[i
]->scan_wait
);
4061 if (cciss_create_hba_sysfs_entry(hba
[i
]))
4064 /* configure PCI DMA stuff */
4065 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64)))
4067 else if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32)))
4070 printk(KERN_ERR
"cciss: no suitable DMA available\n");
4075 * register with the major number, or get a dynamic major number
4076 * by passing 0 as argument. This is done for greater than
4077 * 8 controller support.
4079 if (i
< MAX_CTLR_ORIG
)
4080 hba
[i
]->major
= COMPAQ_CISS_MAJOR
+ i
;
4081 rc
= register_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4082 if (rc
== -EBUSY
|| rc
== -EINVAL
) {
4084 "cciss: Unable to get major number %d for %s "
4085 "on hba %d\n", hba
[i
]->major
, hba
[i
]->devname
, i
);
4088 if (i
>= MAX_CTLR_ORIG
)
4092 /* make sure the board interrupts are off */
4093 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_OFF
);
4094 if (request_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], do_cciss_intr
,
4095 IRQF_DISABLED
| IRQF_SHARED
, hba
[i
]->devname
, hba
[i
])) {
4096 printk(KERN_ERR
"cciss: Unable to get irq %d for %s\n",
4097 hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]->devname
);
4101 printk(KERN_INFO
"%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
4102 hba
[i
]->devname
, pdev
->device
, pci_name(pdev
),
4103 hba
[i
]->intr
[SIMPLE_MODE_INT
], dac
? "" : " not");
4105 hba
[i
]->cmd_pool_bits
=
4106 kmalloc(DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4107 * sizeof(unsigned long), GFP_KERNEL
);
4108 hba
[i
]->cmd_pool
= (CommandList_struct
*)
4109 pci_alloc_consistent(hba
[i
]->pdev
,
4110 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4111 &(hba
[i
]->cmd_pool_dhandle
));
4112 hba
[i
]->errinfo_pool
= (ErrorInfo_struct
*)
4113 pci_alloc_consistent(hba
[i
]->pdev
,
4114 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4115 &(hba
[i
]->errinfo_pool_dhandle
));
4116 if ((hba
[i
]->cmd_pool_bits
== NULL
)
4117 || (hba
[i
]->cmd_pool
== NULL
)
4118 || (hba
[i
]->errinfo_pool
== NULL
)) {
4119 printk(KERN_ERR
"cciss: out of memory");
4122 spin_lock_init(&hba
[i
]->lock
);
4124 /* Initialize the pdev driver private data.
4125 have it point to hba[i]. */
4126 pci_set_drvdata(pdev
, hba
[i
]);
4127 /* command and error info recs zeroed out before
4129 memset(hba
[i
]->cmd_pool_bits
, 0,
4130 DIV_ROUND_UP(hba
[i
]->nr_cmds
, BITS_PER_LONG
)
4131 * sizeof(unsigned long));
4133 hba
[i
]->num_luns
= 0;
4134 hba
[i
]->highest_lun
= -1;
4135 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4136 hba
[i
]->drv
[j
].raid_level
= -1;
4137 hba
[i
]->drv
[j
].queue
= NULL
;
4138 hba
[i
]->gendisk
[j
] = NULL
;
4141 cciss_scsi_setup(i
);
4143 /* Turn the interrupts on so we can service requests */
4144 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_ON
);
4146 /* Get the firmware version */
4147 inq_buff
= kzalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
4148 if (inq_buff
== NULL
) {
4149 printk(KERN_ERR
"cciss: out of memory\n");
4153 return_code
= sendcmd_withirq(CISS_INQUIRY
, i
, inq_buff
,
4154 sizeof(InquiryData_struct
), 0, CTLR_LUNID
, TYPE_CMD
);
4155 if (return_code
== IO_OK
) {
4156 hba
[i
]->firm_ver
[0] = inq_buff
->data_byte
[32];
4157 hba
[i
]->firm_ver
[1] = inq_buff
->data_byte
[33];
4158 hba
[i
]->firm_ver
[2] = inq_buff
->data_byte
[34];
4159 hba
[i
]->firm_ver
[3] = inq_buff
->data_byte
[35];
4160 } else { /* send command failed */
4161 printk(KERN_WARNING
"cciss: unable to determine firmware"
4162 " version of controller\n");
4168 hba
[i
]->cciss_max_sectors
= 2048;
4170 rebuild_lun_table(hba
[i
], 1);
4171 hba
[i
]->busy_initializing
= 0;
4175 kfree(hba
[i
]->cmd_pool_bits
);
4176 if (hba
[i
]->cmd_pool
)
4177 pci_free_consistent(hba
[i
]->pdev
,
4178 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4179 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4180 if (hba
[i
]->errinfo_pool
)
4181 pci_free_consistent(hba
[i
]->pdev
,
4182 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4183 hba
[i
]->errinfo_pool
,
4184 hba
[i
]->errinfo_pool_dhandle
);
4185 free_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]);
4187 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4189 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4191 hba
[i
]->busy_initializing
= 0;
4192 /* cleanup any queues that may have been initialized */
4193 for (j
=0; j
<= hba
[i
]->highest_lun
; j
++){
4194 drive_info_struct
*drv
= &(hba
[i
]->drv
[j
]);
4196 blk_cleanup_queue(drv
->queue
);
4199 * Deliberately omit pci_disable_device(): it does something nasty to
4200 * Smart Array controllers that pci_enable_device does not undo
4202 pci_release_regions(pdev
);
4203 pci_set_drvdata(pdev
, NULL
);
4208 static void cciss_shutdown(struct pci_dev
*pdev
)
4210 ctlr_info_t
*tmp_ptr
;
4215 tmp_ptr
= pci_get_drvdata(pdev
);
4216 if (tmp_ptr
== NULL
)
4222 /* Turn board interrupts off and send the flush cache command */
4223 /* sendcmd will turn off interrupt, and send the flush...
4224 * To write all data in the battery backed cache to disks */
4225 memset(flush_buf
, 0, 4);
4226 return_code
= sendcmd(CCISS_CACHE_FLUSH
, i
, flush_buf
, 4, 0,
4227 CTLR_LUNID
, TYPE_CMD
);
4228 if (return_code
== IO_OK
) {
4229 printk(KERN_INFO
"Completed flushing cache on controller %d\n", i
);
4231 printk(KERN_WARNING
"Error flushing cache on controller %d\n", i
);
4233 free_irq(hba
[i
]->intr
[2], hba
[i
]);
4236 static void __devexit
cciss_remove_one(struct pci_dev
*pdev
)
4238 ctlr_info_t
*tmp_ptr
;
4241 if (pci_get_drvdata(pdev
) == NULL
) {
4242 printk(KERN_ERR
"cciss: Unable to remove device \n");
4246 tmp_ptr
= pci_get_drvdata(pdev
);
4248 if (hba
[i
] == NULL
) {
4249 printk(KERN_ERR
"cciss: device appears to "
4250 "already be removed \n");
4254 mutex_lock(&hba
[i
]->busy_shutting_down
);
4256 remove_from_scan_list(hba
[i
]);
4257 remove_proc_entry(hba
[i
]->devname
, proc_cciss
);
4258 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
4260 /* remove it from the disk list */
4261 for (j
= 0; j
< CISS_MAX_LUN
; j
++) {
4262 struct gendisk
*disk
= hba
[i
]->gendisk
[j
];
4264 struct request_queue
*q
= disk
->queue
;
4266 if (disk
->flags
& GENHD_FL_UP
)
4269 blk_cleanup_queue(q
);
4271 if (hba
[i
]->drv
[j
].raid_level
!= -1)
4272 cciss_destroy_ld_sysfs_entry(&hba
[i
]->drv
[j
]);
4276 #ifdef CONFIG_CISS_SCSI_TAPE
4277 cciss_unregister_scsi(i
); /* unhook from SCSI subsystem */
4280 cciss_shutdown(pdev
);
4282 #ifdef CONFIG_PCI_MSI
4283 if (hba
[i
]->msix_vector
)
4284 pci_disable_msix(hba
[i
]->pdev
);
4285 else if (hba
[i
]->msi_vector
)
4286 pci_disable_msi(hba
[i
]->pdev
);
4287 #endif /* CONFIG_PCI_MSI */
4289 iounmap(hba
[i
]->vaddr
);
4291 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
4292 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
4293 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
4294 hba
[i
]->errinfo_pool
, hba
[i
]->errinfo_pool_dhandle
);
4295 kfree(hba
[i
]->cmd_pool_bits
);
4297 * Deliberately omit pci_disable_device(): it does something nasty to
4298 * Smart Array controllers that pci_enable_device does not undo
4300 pci_release_regions(pdev
);
4301 pci_set_drvdata(pdev
, NULL
);
4302 cciss_destroy_hba_sysfs_entry(hba
[i
]);
4303 mutex_unlock(&hba
[i
]->busy_shutting_down
);
4307 static struct pci_driver cciss_pci_driver
= {
4309 .probe
= cciss_init_one
,
4310 .remove
= __devexit_p(cciss_remove_one
),
4311 .id_table
= cciss_pci_device_id
, /* id_table */
4312 .shutdown
= cciss_shutdown
,
4316 * This is it. Register the PCI driver information for the cards we control
4317 * the OS will call our registered routines when it finds one of our cards.
4319 static int __init
cciss_init(void)
4324 * The hardware requires that commands are aligned on a 64-bit
4325 * boundary. Given that we use pci_alloc_consistent() to allocate an
4326 * array of them, the size must be a multiple of 8 bytes.
4328 BUILD_BUG_ON(sizeof(CommandList_struct
) % 8);
4330 printk(KERN_INFO DRIVER_NAME
"\n");
4332 err
= bus_register(&cciss_bus_type
);
4336 /* Start the scan thread */
4337 cciss_scan_thread
= kthread_run(scan_thread
, NULL
, "cciss_scan");
4338 if (IS_ERR(cciss_scan_thread
)) {
4339 err
= PTR_ERR(cciss_scan_thread
);
4340 goto err_bus_unregister
;
4343 /* Register for our PCI devices */
4344 err
= pci_register_driver(&cciss_pci_driver
);
4346 goto err_thread_stop
;
4351 kthread_stop(cciss_scan_thread
);
4353 bus_unregister(&cciss_bus_type
);
4358 static void __exit
cciss_cleanup(void)
4362 pci_unregister_driver(&cciss_pci_driver
);
4363 /* double check that all controller entrys have been removed */
4364 for (i
= 0; i
< MAX_CTLR
; i
++) {
4365 if (hba
[i
] != NULL
) {
4366 printk(KERN_WARNING
"cciss: had to remove"
4367 " controller %d\n", i
);
4368 cciss_remove_one(hba
[i
]->pdev
);
4371 kthread_stop(cciss_scan_thread
);
4372 remove_proc_entry("driver/cciss", NULL
);
4373 bus_unregister(&cciss_bus_type
);
4376 static void fail_all_cmds(unsigned long ctlr
)
4378 /* If we get here, the board is apparently dead. */
4379 ctlr_info_t
*h
= hba
[ctlr
];
4380 CommandList_struct
*c
;
4381 unsigned long flags
;
4383 printk(KERN_WARNING
"cciss%d: controller not responding.\n", h
->ctlr
);
4384 h
->alive
= 0; /* the controller apparently died... */
4386 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
4388 pci_disable_device(h
->pdev
); /* Make sure it is really dead. */
4390 /* move everything off the request queue onto the completed queue */
4391 while (!hlist_empty(&h
->reqQ
)) {
4392 c
= hlist_entry(h
->reqQ
.first
, CommandList_struct
, list
);
4398 /* Now, fail everything on the completed queue with a HW error */
4399 while (!hlist_empty(&h
->cmpQ
)) {
4400 c
= hlist_entry(h
->cmpQ
.first
, CommandList_struct
, list
);
4402 if (c
->cmd_type
!= CMD_MSG_STALE
)
4403 c
->err_info
->CommandStatus
= CMD_HARDWARE_ERR
;
4404 if (c
->cmd_type
== CMD_RWREQ
) {
4405 complete_command(h
, c
, 0);
4406 } else if (c
->cmd_type
== CMD_IOCTL_PEND
)
4407 complete(c
->waiting
);
4408 #ifdef CONFIG_CISS_SCSI_TAPE
4409 else if (c
->cmd_type
== CMD_SCSI
)
4410 complete_scsi_command(c
, 0, 0);
4413 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
4417 module_init(cciss_init
);
4418 module_exit(cciss_cleanup
);