drivers/bluetooth/ath3k.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  *  You should have received a copy of the GNU General Public License
  15  *  along with this program; if not, write to the Free Software
  16  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  17  *
  18  */
  19
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/slab.h>
  25 #include <linux/types.h>
  26 #include <linux/errno.h>
  27 #include <linux/device.h>
  28 #include <linux/firmware.h>
  29 #include <linux/usb.h>
  30 #include <net/bluetooth/bluetooth.h>
  31
  32 #define VERSION "1.0"
  33 #define ATH3K_FIRMWARE  "ath3k-1.fw"
  34
  35 #define ATH3K_DNLOAD                            0x01
  36 #define ATH3K_GETSTATE                          0x05
  37 #define ATH3K_SET_NORMAL_MODE                   0x07
  38 #define ATH3K_GETVERSION                        0x09
  39 #define USB_REG_SWITCH_VID_PID                  0x0a
  40
  41 #define ATH3K_MODE_MASK                         0x3F
  42 #define ATH3K_NORMAL_MODE                       0x0E
  43
  44 #define ATH3K_PATCH_UPDATE                      0x80
  45 #define ATH3K_SYSCFG_UPDATE                     0x40
  46
  47 #define ATH3K_XTAL_FREQ_26M                     0x00
  48 #define ATH3K_XTAL_FREQ_40M                     0x01
  49 #define ATH3K_XTAL_FREQ_19P2                    0x02
  50 #define ATH3K_NAME_LEN                          0xFF
  51
  52 struct ath3k_version {
  53         unsigned int    rom_version;
  54         unsigned int    build_version;
  55         unsigned int    ram_version;
  56         unsigned char   ref_clock;
  57         unsigned char   reserved[0x07];
  58 };
  59
  60 static struct usb_device_id ath3k_table[] = {
  61         /* Atheros AR3011 */
  62         { USB_DEVICE(0x0CF3, 0x3000) },
  63
  64         /* Atheros AR3011 with sflash firmware*/
  65         { USB_DEVICE(0x0CF3, 0x3002) },
  66         { USB_DEVICE(0x0CF3, 0xE019) },
  67         { USB_DEVICE(0x13d3, 0x3304) },
  68         { USB_DEVICE(0x0930, 0x0215) },
  69         { USB_DEVICE(0x0489, 0xE03D) },
  70         { USB_DEVICE(0x0489, 0xE027) },
  71
  72         /* Atheros AR9285 Malbec with sflash firmware */
  73         { USB_DEVICE(0x03F0, 0x311D) },
  74
  75         /* Atheros AR3012 with sflash firmware*/
  76         { USB_DEVICE(0x0CF3, 0x3004) },
  77         { USB_DEVICE(0x0CF3, 0x3008) },
  78         { USB_DEVICE(0x0CF3, 0x311D) },
  79         { USB_DEVICE(0x13d3, 0x3375) },
  80         { USB_DEVICE(0x04CA, 0x3004) },
  81         { USB_DEVICE(0x04CA, 0x3005) },
  82         { USB_DEVICE(0x04CA, 0x3006) },
  83         { USB_DEVICE(0x04CA, 0x3008) },
  84         { USB_DEVICE(0x13d3, 0x3362) },
  85         { USB_DEVICE(0x0CF3, 0xE004) },
  86         { USB_DEVICE(0x0930, 0x0219) },
  87         { USB_DEVICE(0x0489, 0xe057) },
  88         { USB_DEVICE(0x13d3, 0x3393) },
  89         { USB_DEVICE(0x0489, 0xe04e) },
  90         { USB_DEVICE(0x0489, 0xe056) },
  91
  92         /* Atheros AR5BBU12 with sflash firmware */
  93         { USB_DEVICE(0x0489, 0xE02C) },
  94
  95         /* Atheros AR5BBU22 with sflash firmware */
  96         { USB_DEVICE(0x0489, 0xE03C) },
  97         { USB_DEVICE(0x0489, 0xE036) },
  98
  99         { }     /* Terminating entry */
 100 };
 101
 102 MODULE_DEVICE_TABLE(usb, ath3k_table);
 103
 104 #define BTUSB_ATH3012           0x80
 105 /* This table is to load patch and sysconfig files
 106  * for AR3012 */
 107 static struct usb_device_id ath3k_blist_tbl[] = {
 108
 109         /* Atheros AR3012 with sflash firmware*/
 110         { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 111         { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 112         { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 113         { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 114         { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
 115         { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 116         { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 117         { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 118         { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 119         { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 120         { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 121         { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 122         { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 123         { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 124         { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 125
 126         /* Atheros AR5BBU22 with sflash firmware */
 127         { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
 128         { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
 129
 130         { }     /* Terminating entry */
 131 };
 132
 133 #define USB_REQ_DFU_DNLOAD      1
 134 #define BULK_SIZE               4096
 135 #define FW_HDR_SIZE             20
 136
 137 static int ath3k_load_firmware(struct usb_device *udev,
 138                                 const struct firmware *firmware)
 139 {
 140         u8 *send_buf;
 141         int err, pipe, len, size, sent = 0;
 142         int count = firmware->size;
 143
 144         BT_DBG("udev %p", udev);
 145
 146         pipe = usb_sndctrlpipe(udev, 0);
 147
 148         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 149         if (!send_buf) {
 150                 BT_ERR("Can't allocate memory chunk for firmware");
 151                 return -ENOMEM;
 152         }
 153
 154         memcpy(send_buf, firmware->data, 20);
 155         if ((err = usb_control_msg(udev, pipe,
 156                                 USB_REQ_DFU_DNLOAD,
 157                                 USB_TYPE_VENDOR, 0, 0,
 158                                 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
 159                 BT_ERR("Can't change to loading configuration err");
 160                 goto error;
 161         }
 162         sent += 20;
 163         count -= 20;
 164
 165         while (count) {
 166                 size = min_t(uint, count, BULK_SIZE);
 167                 pipe = usb_sndbulkpipe(udev, 0x02);
 168                 memcpy(send_buf, firmware->data + sent, size);
 169
 170                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 171                                         &len, 3000);
 172
 173                 if (err || (len != size)) {
 174                         BT_ERR("Error in firmware loading err = %d,"
 175                                 "len = %d, size = %d", err, len, size);
 176                         goto error;
 177                 }
 178
 179                 sent  += size;
 180                 count -= size;
 181         }
 182
 183 error:
 184         kfree(send_buf);
 185         return err;
 186 }
 187
 188 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 189 {
 190         int pipe = 0;
 191
 192         pipe = usb_rcvctrlpipe(udev, 0);
 193         return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
 194                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 195                         state, 0x01, USB_CTRL_SET_TIMEOUT);
 196 }
 197
 198 static int ath3k_get_version(struct usb_device *udev,
 199                         struct ath3k_version *version)
 200 {
 201         int pipe = 0;
 202
 203         pipe = usb_rcvctrlpipe(udev, 0);
 204         return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
 205                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
 206                         sizeof(struct ath3k_version),
 207                         USB_CTRL_SET_TIMEOUT);
 208 }
 209
 210 static int ath3k_load_fwfile(struct usb_device *udev,
 211                 const struct firmware *firmware)
 212 {
 213         u8 *send_buf;
 214         int err, pipe, len, size, count, sent = 0;
 215         int ret;
 216
 217         count = firmware->size;
 218
 219         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 220         if (!send_buf) {
 221                 BT_ERR("Can't allocate memory chunk for firmware");
 222                 return -ENOMEM;
 223         }
 224
 225         size = min_t(uint, count, FW_HDR_SIZE);
 226         memcpy(send_buf, firmware->data, size);
 227
 228         pipe = usb_sndctrlpipe(udev, 0);
 229         ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
 230                         USB_TYPE_VENDOR, 0, 0, send_buf,
 231                         size, USB_CTRL_SET_TIMEOUT);
 232         if (ret < 0) {
 233                 BT_ERR("Can't change to loading configuration err");
 234                 kfree(send_buf);
 235                 return ret;
 236         }
 237
 238         sent += size;
 239         count -= size;
 240
 241         while (count) {
 242                 size = min_t(uint, count, BULK_SIZE);
 243                 pipe = usb_sndbulkpipe(udev, 0x02);
 244
 245                 memcpy(send_buf, firmware->data + sent, size);
 246
 247                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 248                                         &len, 3000);
 249                 if (err || (len != size)) {
 250                         BT_ERR("Error in firmware loading err = %d,"
 251                                 "len = %d, size = %d", err, len, size);
 252                         kfree(send_buf);
 253                         return err;
 254                 }
 255                 sent  += size;
 256                 count -= size;
 257         }
 258
 259         kfree(send_buf);
 260         return 0;
 261 }
 262
 263 static int ath3k_switch_pid(struct usb_device *udev)
 264 {
 265         int pipe = 0;
 266
 267         pipe = usb_sndctrlpipe(udev, 0);
 268         return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
 269                         USB_TYPE_VENDOR, 0, 0,
 270                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 271 }
 272
 273 static int ath3k_set_normal_mode(struct usb_device *udev)
 274 {
 275         unsigned char fw_state;
 276         int pipe = 0, ret;
 277
 278         ret = ath3k_get_state(udev, &fw_state);
 279         if (ret < 0) {
 280                 BT_ERR("Can't get state to change to normal mode err");
 281                 return ret;
 282         }
 283
 284         if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
 285                 BT_DBG("firmware was already in normal mode");
 286                 return 0;
 287         }
 288
 289         pipe = usb_sndctrlpipe(udev, 0);
 290         return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
 291                         USB_TYPE_VENDOR, 0, 0,
 292                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 293 }
 294
 295 static int ath3k_load_patch(struct usb_device *udev)
 296 {
 297         unsigned char fw_state;
 298         char filename[ATH3K_NAME_LEN] = {0};
 299         const struct firmware *firmware;
 300         struct ath3k_version fw_version, pt_version;
 301         int ret;
 302
 303         ret = ath3k_get_state(udev, &fw_state);
 304         if (ret < 0) {
 305                 BT_ERR("Can't get state to change to load ram patch err");
 306                 return ret;
 307         }
 308
 309         if (fw_state & ATH3K_PATCH_UPDATE) {
 310                 BT_DBG("Patch was already downloaded");
 311                 return 0;
 312         }
 313
 314         ret = ath3k_get_version(udev, &fw_version);
 315         if (ret < 0) {
 316                 BT_ERR("Can't get version to change to load ram patch err");
 317                 return ret;
 318         }
 319
 320         snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
 321                 fw_version.rom_version);
 322
 323         ret = request_firmware(&firmware, filename, &udev->dev);
 324         if (ret < 0) {
 325                 BT_ERR("Patch file not found %s", filename);
 326                 return ret;
 327         }
 328
 329         pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
 330         pt_version.build_version = *(int *)
 331                 (firmware->data + firmware->size - 4);
 332
 333         if ((pt_version.rom_version != fw_version.rom_version) ||
 334                 (pt_version.build_version <= fw_version.build_version)) {
 335                 BT_ERR("Patch file version did not match with firmware");
 336                 release_firmware(firmware);
 337                 return -EINVAL;
 338         }
 339
 340         ret = ath3k_load_fwfile(udev, firmware);
 341         release_firmware(firmware);
 342
 343         return ret;
 344 }
 345
 346 static int ath3k_load_syscfg(struct usb_device *udev)
 347 {
 348         unsigned char fw_state;
 349         char filename[ATH3K_NAME_LEN] = {0};
 350         const struct firmware *firmware;
 351         struct ath3k_version fw_version;
 352         int clk_value, ret;
 353
 354         ret = ath3k_get_state(udev, &fw_state);
 355         if (ret < 0) {
 356                 BT_ERR("Can't get state to change to load configration err");
 357                 return -EBUSY;
 358         }
 359
 360         ret = ath3k_get_version(udev, &fw_version);
 361         if (ret < 0) {
 362                 BT_ERR("Can't get version to change to load ram patch err");
 363                 return ret;
 364         }
 365
 366         switch (fw_version.ref_clock) {
 367
 368         case ATH3K_XTAL_FREQ_26M:
 369                 clk_value = 26;
 370                 break;
 371         case ATH3K_XTAL_FREQ_40M:
 372                 clk_value = 40;
 373                 break;
 374         case ATH3K_XTAL_FREQ_19P2:
 375                 clk_value = 19;
 376                 break;
 377         default:
 378                 clk_value = 0;
 379                 break;
 380         }
 381
 382         snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
 383                 fw_version.rom_version, clk_value, ".dfu");
 384
 385         ret = request_firmware(&firmware, filename, &udev->dev);
 386         if (ret < 0) {
 387                 BT_ERR("Configuration file not found %s", filename);
 388                 return ret;
 389         }
 390
 391         ret = ath3k_load_fwfile(udev, firmware);
 392         release_firmware(firmware);
 393
 394         return ret;
 395 }
 396
 397 static int ath3k_probe(struct usb_interface *intf,
 398                         const struct usb_device_id *id)
 399 {
 400         const struct firmware *firmware;
 401         struct usb_device *udev = interface_to_usbdev(intf);
 402         int ret;
 403
 404         BT_DBG("intf %p id %p", intf, id);
 405
 406         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 407                 return -ENODEV;
 408
 409         /* match device ID in ath3k blacklist table */
 410         if (!id->driver_info) {
 411                 const struct usb_device_id *match;
 412                 match = usb_match_id(intf, ath3k_blist_tbl);
 413                 if (match)
 414                         id = match;
 415         }
 416
 417         /* load patch and sysconfig files for AR3012 */
 418         if (id->driver_info & BTUSB_ATH3012) {
 419
 420                 /* New firmware with patch and sysconfig files already loaded */
 421                 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
 422                         return -ENODEV;
 423
 424                 ret = ath3k_load_patch(udev);
 425                 if (ret < 0) {
 426                         BT_ERR("Loading patch file failed");
 427                         return ret;
 428                 }
 429                 ret = ath3k_load_syscfg(udev);
 430                 if (ret < 0) {
 431                         BT_ERR("Loading sysconfig file failed");
 432                         return ret;
 433                 }
 434                 ret = ath3k_set_normal_mode(udev);
 435                 if (ret < 0) {
 436                         BT_ERR("Set normal mode failed");
 437                         return ret;
 438                 }
 439                 ath3k_switch_pid(udev);
 440                 return 0;
 441         }
 442
 443         ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
 444         if (ret < 0) {
 445                 if (ret == -ENOENT)
 446                         BT_ERR("Firmware file \"%s\" not found",
 447                                                         ATH3K_FIRMWARE);
 448                 else
 449                         BT_ERR("Firmware file \"%s\" request failed (err=%d)",
 450                                                         ATH3K_FIRMWARE, ret);
 451                 return ret;
 452         }
 453
 454         ret = ath3k_load_firmware(udev, firmware);
 455         release_firmware(firmware);
 456
 457         return ret;
 458 }
 459
 460 static void ath3k_disconnect(struct usb_interface *intf)
 461 {
 462         BT_DBG("ath3k_disconnect intf %p", intf);
 463 }
 464
 465 static struct usb_driver ath3k_driver = {
 466         .name           = "ath3k",
 467         .probe          = ath3k_probe,
 468         .disconnect     = ath3k_disconnect,
 469         .id_table       = ath3k_table,
 470         .disable_hub_initiated_lpm = 1,
 471 };
 472
 473 module_usb_driver(ath3k_driver);
 474
 475 MODULE_AUTHOR("Atheros Communications");
 476 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
 477 MODULE_VERSION(VERSION);
 478 MODULE_LICENSE("GPL");
 479 MODULE_FIRMWARE(ATH3K_FIRMWARE);