drivers/bluetooth/ath3k.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  *  You should have received a copy of the GNU General Public License
  15  *  along with this program; if not, write to the Free Software
  16  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  17  *
  18  */
  19
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/slab.h>
  25 #include <linux/types.h>
  26 #include <linux/errno.h>
  27 #include <linux/device.h>
  28 #include <linux/firmware.h>
  29 #include <linux/usb.h>
  30 #include <net/bluetooth/bluetooth.h>
  31
  32 #define VERSION "1.0"
  33 #define ATH3K_FIRMWARE  "ath3k-1.fw"
  34
  35 #define ATH3K_DNLOAD                            0x01
  36 #define ATH3K_GETSTATE                          0x05
  37 #define ATH3K_SET_NORMAL_MODE                   0x07
  38 #define ATH3K_GETVERSION                        0x09
  39 #define USB_REG_SWITCH_VID_PID                  0x0a
  40
  41 #define ATH3K_MODE_MASK                         0x3F
  42 #define ATH3K_NORMAL_MODE                       0x0E
  43
  44 #define ATH3K_PATCH_UPDATE                      0x80
  45 #define ATH3K_SYSCFG_UPDATE                     0x40
  46
  47 #define ATH3K_XTAL_FREQ_26M                     0x00
  48 #define ATH3K_XTAL_FREQ_40M                     0x01
  49 #define ATH3K_XTAL_FREQ_19P2                    0x02
  50 #define ATH3K_NAME_LEN                          0xFF
  51
  52 struct ath3k_version {
  53         unsigned int    rom_version;
  54         unsigned int    build_version;
  55         unsigned int    ram_version;
  56         unsigned char   ref_clock;
  57         unsigned char   reserved[0x07];
  58 };
  59
  60 static const struct usb_device_id ath3k_table[] = {
  61         /* Atheros AR3011 */
  62         { USB_DEVICE(0x0CF3, 0x3000) },
  63
  64         /* Atheros AR3011 with sflash firmware*/
  65         { USB_DEVICE(0x0CF3, 0x3002) },
  66         { USB_DEVICE(0x0CF3, 0xE019) },
  67         { USB_DEVICE(0x13d3, 0x3304) },
  68         { USB_DEVICE(0x0930, 0x0215) },
  69         { USB_DEVICE(0x0489, 0xE03D) },
  70         { USB_DEVICE(0x0489, 0xE027) },
  71
  72         /* Atheros AR9285 Malbec with sflash firmware */
  73         { USB_DEVICE(0x03F0, 0x311D) },
  74
  75         /* Atheros AR3012 with sflash firmware*/
  76         { USB_DEVICE(0x0CF3, 0x0036) },
  77         { USB_DEVICE(0x0CF3, 0x3004) },
  78         { USB_DEVICE(0x0CF3, 0x3008) },
  79         { USB_DEVICE(0x0CF3, 0x311D) },
  80         { USB_DEVICE(0x0CF3, 0x311E) },
  81         { USB_DEVICE(0x0CF3, 0x817a) },
  82         { USB_DEVICE(0x13d3, 0x3375) },
  83         { USB_DEVICE(0x04CA, 0x3004) },
  84         { USB_DEVICE(0x04CA, 0x3005) },
  85         { USB_DEVICE(0x04CA, 0x3006) },
  86         { USB_DEVICE(0x04CA, 0x3008) },
  87         { USB_DEVICE(0x04CA, 0x300b) },
  88         { USB_DEVICE(0x13d3, 0x3362) },
  89         { USB_DEVICE(0x0CF3, 0xE004) },
  90         { USB_DEVICE(0x0CF3, 0xE005) },
  91         { USB_DEVICE(0x0930, 0x0219) },
  92         { USB_DEVICE(0x0930, 0x0220) },
  93         { USB_DEVICE(0x0489, 0xe057) },
  94         { USB_DEVICE(0x13d3, 0x3393) },
  95         { USB_DEVICE(0x0489, 0xe04e) },
  96         { USB_DEVICE(0x0489, 0xe056) },
  97         { USB_DEVICE(0x0489, 0xe04d) },
  98         { USB_DEVICE(0x04c5, 0x1330) },
  99         { USB_DEVICE(0x13d3, 0x3402) },
 100         { USB_DEVICE(0x0cf3, 0x3121) },
 101         { USB_DEVICE(0x0cf3, 0xe003) },
 102         { USB_DEVICE(0x0489, 0xe05f) },
 103
 104         /* Atheros AR5BBU12 with sflash firmware */
 105         { USB_DEVICE(0x0489, 0xE02C) },
 106
 107         /* Atheros AR5BBU22 with sflash firmware */
 108         { USB_DEVICE(0x0489, 0xE03C) },
 109         { USB_DEVICE(0x0489, 0xE036) },
 110
 111         { }     /* Terminating entry */
 112 };
 113
 114 MODULE_DEVICE_TABLE(usb, ath3k_table);
 115
 116 #define BTUSB_ATH3012           0x80
 117 /* This table is to load patch and sysconfig files
 118  * for AR3012 */
 119 static const struct usb_device_id ath3k_blist_tbl[] = {
 120
 121         /* Atheros AR3012 with sflash firmware*/
 122         { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 123         { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 124         { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 125         { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 126         { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
 127         { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
 128         { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 129         { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
 130         { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 131         { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 132         { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 133         { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 134         { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 135         { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 136         { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 137         { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 138         { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
 139         { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 140         { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 141         { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 142         { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 143         { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 144         { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 145         { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 146         { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 147         { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
 148         { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 149
 150         /* Atheros AR5BBU22 with sflash firmware */
 151         { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
 152         { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
 153
 154         { }     /* Terminating entry */
 155 };
 156
 157 #define USB_REQ_DFU_DNLOAD      1
 158 #define BULK_SIZE               4096
 159 #define FW_HDR_SIZE             20
 160
 161 static int ath3k_load_firmware(struct usb_device *udev,
 162                                 const struct firmware *firmware)
 163 {
 164         u8 *send_buf;
 165         int err, pipe, len, size, sent = 0;
 166         int count = firmware->size;
 167
 168         BT_DBG("udev %p", udev);
 169
 170         pipe = usb_sndctrlpipe(udev, 0);
 171
 172         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 173         if (!send_buf) {
 174                 BT_ERR("Can't allocate memory chunk for firmware");
 175                 return -ENOMEM;
 176         }
 177
 178         memcpy(send_buf, firmware->data, 20);
 179         if ((err = usb_control_msg(udev, pipe,
 180                                 USB_REQ_DFU_DNLOAD,
 181                                 USB_TYPE_VENDOR, 0, 0,
 182                                 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
 183                 BT_ERR("Can't change to loading configuration err");
 184                 goto error;
 185         }
 186         sent += 20;
 187         count -= 20;
 188
 189         while (count) {
 190                 size = min_t(uint, count, BULK_SIZE);
 191                 pipe = usb_sndbulkpipe(udev, 0x02);
 192                 memcpy(send_buf, firmware->data + sent, size);
 193
 194                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 195                                         &len, 3000);
 196
 197                 if (err || (len != size)) {
 198                         BT_ERR("Error in firmware loading err = %d,"
 199                                 "len = %d, size = %d", err, len, size);
 200                         goto error;
 201                 }
 202
 203                 sent  += size;
 204                 count -= size;
 205         }
 206
 207 error:
 208         kfree(send_buf);
 209         return err;
 210 }
 211
 212 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 213 {
 214         int ret, pipe = 0;
 215         char *buf;
 216
 217         buf = kmalloc(sizeof(*buf), GFP_KERNEL);
 218         if (!buf)
 219                 return -ENOMEM;
 220
 221         pipe = usb_rcvctrlpipe(udev, 0);
 222         ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
 223                               USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 224                               buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
 225
 226         *state = *buf;
 227         kfree(buf);
 228
 229         return ret;
 230 }
 231
 232 static int ath3k_get_version(struct usb_device *udev,
 233                         struct ath3k_version *version)
 234 {
 235         int ret, pipe = 0;
 236         struct ath3k_version *buf;
 237         const int size = sizeof(*buf);
 238
 239         buf = kmalloc(size, GFP_KERNEL);
 240         if (!buf)
 241                 return -ENOMEM;
 242
 243         pipe = usb_rcvctrlpipe(udev, 0);
 244         ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
 245                               USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 246                               buf, size, USB_CTRL_SET_TIMEOUT);
 247
 248         memcpy(version, buf, size);
 249         kfree(buf);
 250
 251         return ret;
 252 }
 253
 254 static int ath3k_load_fwfile(struct usb_device *udev,
 255                 const struct firmware *firmware)
 256 {
 257         u8 *send_buf;
 258         int err, pipe, len, size, count, sent = 0;
 259         int ret;
 260
 261         count = firmware->size;
 262
 263         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 264         if (!send_buf) {
 265                 BT_ERR("Can't allocate memory chunk for firmware");
 266                 return -ENOMEM;
 267         }
 268
 269         size = min_t(uint, count, FW_HDR_SIZE);
 270         memcpy(send_buf, firmware->data, size);
 271
 272         pipe = usb_sndctrlpipe(udev, 0);
 273         ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
 274                         USB_TYPE_VENDOR, 0, 0, send_buf,
 275                         size, USB_CTRL_SET_TIMEOUT);
 276         if (ret < 0) {
 277                 BT_ERR("Can't change to loading configuration err");
 278                 kfree(send_buf);
 279                 return ret;
 280         }
 281
 282         sent += size;
 283         count -= size;
 284
 285         while (count) {
 286                 size = min_t(uint, count, BULK_SIZE);
 287                 pipe = usb_sndbulkpipe(udev, 0x02);
 288
 289                 memcpy(send_buf, firmware->data + sent, size);
 290
 291                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 292                                         &len, 3000);
 293                 if (err || (len != size)) {
 294                         BT_ERR("Error in firmware loading err = %d,"
 295                                 "len = %d, size = %d", err, len, size);
 296                         kfree(send_buf);
 297                         return err;
 298                 }
 299                 sent  += size;
 300                 count -= size;
 301         }
 302
 303         kfree(send_buf);
 304         return 0;
 305 }
 306
 307 static int ath3k_switch_pid(struct usb_device *udev)
 308 {
 309         int pipe = 0;
 310
 311         pipe = usb_sndctrlpipe(udev, 0);
 312         return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
 313                         USB_TYPE_VENDOR, 0, 0,
 314                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 315 }
 316
 317 static int ath3k_set_normal_mode(struct usb_device *udev)
 318 {
 319         unsigned char fw_state;
 320         int pipe = 0, ret;
 321
 322         ret = ath3k_get_state(udev, &fw_state);
 323         if (ret < 0) {
 324                 BT_ERR("Can't get state to change to normal mode err");
 325                 return ret;
 326         }
 327
 328         if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
 329                 BT_DBG("firmware was already in normal mode");
 330                 return 0;
 331         }
 332
 333         pipe = usb_sndctrlpipe(udev, 0);
 334         return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
 335                         USB_TYPE_VENDOR, 0, 0,
 336                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 337 }
 338
 339 static int ath3k_load_patch(struct usb_device *udev)
 340 {
 341         unsigned char fw_state;
 342         char filename[ATH3K_NAME_LEN] = {0};
 343         const struct firmware *firmware;
 344         struct ath3k_version fw_version, pt_version;
 345         int ret;
 346
 347         ret = ath3k_get_state(udev, &fw_state);
 348         if (ret < 0) {
 349                 BT_ERR("Can't get state to change to load ram patch err");
 350                 return ret;
 351         }
 352
 353         if (fw_state & ATH3K_PATCH_UPDATE) {
 354                 BT_DBG("Patch was already downloaded");
 355                 return 0;
 356         }
 357
 358         ret = ath3k_get_version(udev, &fw_version);
 359         if (ret < 0) {
 360                 BT_ERR("Can't get version to change to load ram patch err");
 361                 return ret;
 362         }
 363
 364         snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
 365                 fw_version.rom_version);
 366
 367         ret = request_firmware(&firmware, filename, &udev->dev);
 368         if (ret < 0) {
 369                 BT_ERR("Patch file not found %s", filename);
 370                 return ret;
 371         }
 372
 373         pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
 374         pt_version.build_version = *(int *)
 375                 (firmware->data + firmware->size - 4);
 376
 377         if ((pt_version.rom_version != fw_version.rom_version) ||
 378                 (pt_version.build_version <= fw_version.build_version)) {
 379                 BT_ERR("Patch file version did not match with firmware");
 380                 release_firmware(firmware);
 381                 return -EINVAL;
 382         }
 383
 384         ret = ath3k_load_fwfile(udev, firmware);
 385         release_firmware(firmware);
 386
 387         return ret;
 388 }
 389
 390 static int ath3k_load_syscfg(struct usb_device *udev)
 391 {
 392         unsigned char fw_state;
 393         char filename[ATH3K_NAME_LEN] = {0};
 394         const struct firmware *firmware;
 395         struct ath3k_version fw_version;
 396         int clk_value, ret;
 397
 398         ret = ath3k_get_state(udev, &fw_state);
 399         if (ret < 0) {
 400                 BT_ERR("Can't get state to change to load configuration err");
 401                 return -EBUSY;
 402         }
 403
 404         ret = ath3k_get_version(udev, &fw_version);
 405         if (ret < 0) {
 406                 BT_ERR("Can't get version to change to load ram patch err");
 407                 return ret;
 408         }
 409
 410         switch (fw_version.ref_clock) {
 411
 412         case ATH3K_XTAL_FREQ_26M:
 413                 clk_value = 26;
 414                 break;
 415         case ATH3K_XTAL_FREQ_40M:
 416                 clk_value = 40;
 417                 break;
 418         case ATH3K_XTAL_FREQ_19P2:
 419                 clk_value = 19;
 420                 break;
 421         default:
 422                 clk_value = 0;
 423                 break;
 424         }
 425
 426         snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
 427                 fw_version.rom_version, clk_value, ".dfu");
 428
 429         ret = request_firmware(&firmware, filename, &udev->dev);
 430         if (ret < 0) {
 431                 BT_ERR("Configuration file not found %s", filename);
 432                 return ret;
 433         }
 434
 435         ret = ath3k_load_fwfile(udev, firmware);
 436         release_firmware(firmware);
 437
 438         return ret;
 439 }
 440
 441 static int ath3k_probe(struct usb_interface *intf,
 442                         const struct usb_device_id *id)
 443 {
 444         const struct firmware *firmware;
 445         struct usb_device *udev = interface_to_usbdev(intf);
 446         int ret;
 447
 448         BT_DBG("intf %p id %p", intf, id);
 449
 450         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 451                 return -ENODEV;
 452
 453         /* match device ID in ath3k blacklist table */
 454         if (!id->driver_info) {
 455                 const struct usb_device_id *match;
 456                 match = usb_match_id(intf, ath3k_blist_tbl);
 457                 if (match)
 458                         id = match;
 459         }
 460
 461         /* load patch and sysconfig files for AR3012 */
 462         if (id->driver_info & BTUSB_ATH3012) {
 463
 464                 /* New firmware with patch and sysconfig files already loaded */
 465                 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
 466                         return -ENODEV;
 467
 468                 ret = ath3k_load_patch(udev);
 469                 if (ret < 0) {
 470                         BT_ERR("Loading patch file failed");
 471                         return ret;
 472                 }
 473                 ret = ath3k_load_syscfg(udev);
 474                 if (ret < 0) {
 475                         BT_ERR("Loading sysconfig file failed");
 476                         return ret;
 477                 }
 478                 ret = ath3k_set_normal_mode(udev);
 479                 if (ret < 0) {
 480                         BT_ERR("Set normal mode failed");
 481                         return ret;
 482                 }
 483                 ath3k_switch_pid(udev);
 484                 return 0;
 485         }
 486
 487         ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
 488         if (ret < 0) {
 489                 if (ret == -ENOENT)
 490                         BT_ERR("Firmware file \"%s\" not found",
 491                                                         ATH3K_FIRMWARE);
 492                 else
 493                         BT_ERR("Firmware file \"%s\" request failed (err=%d)",
 494                                                         ATH3K_FIRMWARE, ret);
 495                 return ret;
 496         }
 497
 498         ret = ath3k_load_firmware(udev, firmware);
 499         release_firmware(firmware);
 500
 501         return ret;
 502 }
 503
 504 static void ath3k_disconnect(struct usb_interface *intf)
 505 {
 506         BT_DBG("ath3k_disconnect intf %p", intf);
 507 }
 508
 509 static struct usb_driver ath3k_driver = {
 510         .name           = "ath3k",
 511         .probe          = ath3k_probe,
 512         .disconnect     = ath3k_disconnect,
 513         .id_table       = ath3k_table,
 514         .disable_hub_initiated_lpm = 1,
 515 };
 516
 517 module_usb_driver(ath3k_driver);
 518
 519 MODULE_AUTHOR("Atheros Communications");
 520 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
 521 MODULE_VERSION(VERSION);
 522 MODULE_LICENSE("GPL");
 523 MODULE_FIRMWARE(ATH3K_FIRMWARE);