3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix
;
39 static bool force_scofix
;
41 static bool reset
= true;
43 static struct usb_driver btusb_driver
;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
64 #define BTUSB_IFNUM_2 0x80000
66 static const struct usb_device_id btusb_table
[] = {
67 /* Generic Bluetooth USB device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
70 /* Generic Bluetooth AMP device */
71 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
73 /* Generic Bluetooth USB interface */
74 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
76 /* Apple-specific (Broadcom) devices */
77 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
78 .driver_info
= BTUSB_BCM_APPLE
| BTUSB_IFNUM_2
},
80 /* MediaTek MT76x0E */
81 { USB_DEVICE(0x0e8d, 0x763f) },
83 /* Broadcom SoftSailing reporting vendor specific */
84 { USB_DEVICE(0x0a5c, 0x21e1) },
86 /* Apple MacBookPro 7,1 */
87 { USB_DEVICE(0x05ac, 0x8213) },
90 { USB_DEVICE(0x05ac, 0x8215) },
92 /* Apple MacBookPro6,2 */
93 { USB_DEVICE(0x05ac, 0x8218) },
95 /* Apple MacBookAir3,1, MacBookAir3,2 */
96 { USB_DEVICE(0x05ac, 0x821b) },
98 /* Apple MacBookAir4,1 */
99 { USB_DEVICE(0x05ac, 0x821f) },
101 /* Apple MacBookPro8,2 */
102 { USB_DEVICE(0x05ac, 0x821a) },
104 /* Apple MacMini5,1 */
105 { USB_DEVICE(0x05ac, 0x8281) },
107 /* AVM BlueFRITZ! USB v2.0 */
108 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
110 /* Bluetooth Ultraport Module from IBM */
111 { USB_DEVICE(0x04bf, 0x030a) },
113 /* ALPS Modules with non-standard id */
114 { USB_DEVICE(0x044e, 0x3001) },
115 { USB_DEVICE(0x044e, 0x3002) },
117 /* Ericsson with non-standard id */
118 { USB_DEVICE(0x0bdb, 0x1002) },
120 /* Canyon CN-BTU1 with HID interfaces */
121 { USB_DEVICE(0x0c10, 0x0000) },
123 /* Broadcom BCM20702A0 */
124 { USB_DEVICE(0x413c, 0x8197) },
126 /* Broadcom BCM20702B0 (Dynex/Insignia) */
127 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
129 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
130 { USB_DEVICE(0x105b, 0xe065), .driver_info
= BTUSB_BCM_PATCHRAM
},
132 /* Foxconn - Hon Hai */
133 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
134 .driver_info
= BTUSB_BCM_PATCHRAM
},
136 /* Lite-On Technology - Broadcom based */
137 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
138 .driver_info
= BTUSB_BCM_PATCHRAM
},
140 /* Broadcom devices with vendor specific id */
141 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
142 .driver_info
= BTUSB_BCM_PATCHRAM
},
144 /* ASUSTek Computer - Broadcom based */
145 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
146 .driver_info
= BTUSB_BCM_PATCHRAM
},
148 /* Belkin F8065bf - Broadcom based */
149 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
150 .driver_info
= BTUSB_BCM_PATCHRAM
},
152 /* IMC Networks - Broadcom based */
153 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
154 .driver_info
= BTUSB_BCM_PATCHRAM
},
156 /* Toshiba Corp - Broadcom based */
157 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
158 .driver_info
= BTUSB_BCM_PATCHRAM
},
160 /* Intel Bluetooth USB Bootloader (RAM module) */
161 { USB_DEVICE(0x8087, 0x0a5a),
162 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
164 { } /* Terminating entry */
167 MODULE_DEVICE_TABLE(usb
, btusb_table
);
169 static const struct usb_device_id blacklist_table
[] = {
170 /* CSR BlueCore devices */
171 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
173 /* Broadcom BCM2033 without firmware */
174 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
176 /* Broadcom BCM2045 devices */
177 { USB_DEVICE(0x0a5c, 0x2045), .driver_info
= BTUSB_BCM2045
},
179 /* Atheros 3011 with sflash firmware */
180 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
181 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
182 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
183 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
184 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
185 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
186 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
188 /* Atheros AR9285 Malbec with sflash firmware */
189 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
191 /* Atheros 3012 with sflash firmware */
192 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
193 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x0489, 0xe076), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x0489, 0xe095), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x04ca, 0x300d), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x04ca, 0x300f), .driver_info
= BTUSB_ATH3012
},
209 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
210 { USB_DEVICE(0x04ca, 0x3014), .driver_info
= BTUSB_ATH3012
},
211 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
212 { USB_DEVICE(0x0930, 0x021c), .driver_info
= BTUSB_ATH3012
},
213 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
214 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
215 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
216 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
217 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
218 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
219 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
220 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
221 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
222 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
223 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
224 { USB_DEVICE(0x0cf3, 0x817b), .driver_info
= BTUSB_ATH3012
},
225 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
226 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
227 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
228 { USB_DEVICE(0x0cf3, 0xe006), .driver_info
= BTUSB_ATH3012
},
229 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
230 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
231 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
232 { USB_DEVICE(0x13d3, 0x3395), .driver_info
= BTUSB_ATH3012
},
233 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
234 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
235 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
236 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
237 { USB_DEVICE(0x13d3, 0x3474), .driver_info
= BTUSB_ATH3012
},
239 /* Atheros AR5BBU12 with sflash firmware */
240 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
242 /* Atheros AR5BBU12 with sflash firmware */
243 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
244 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
246 /* QCA ROME chipset */
247 { USB_DEVICE(0x0cf3, 0xe007), .driver_info
= BTUSB_QCA_ROME
},
248 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
249 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
251 /* Broadcom BCM2035 */
252 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
253 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
254 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
256 /* Broadcom BCM2045 */
257 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
258 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
260 /* IBM/Lenovo ThinkPad with Broadcom chip */
261 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
262 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
264 /* HP laptop with Broadcom chip */
265 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
267 /* Dell laptop with Broadcom chip */
268 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
270 /* Dell Wireless 370 and 410 devices */
271 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
272 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
274 /* Belkin F8T012 and F8T013 devices */
275 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
276 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
278 /* Asus WL-BTD202 device */
279 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
281 /* Kensington Bluetooth USB adapter */
282 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
284 /* RTX Telecom based adapters with buggy SCO support */
285 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
286 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
288 /* CONWISE Technology based adapters with buggy SCO support */
289 { USB_DEVICE(0x0e5e, 0x6622), .driver_info
= BTUSB_BROKEN_ISOC
},
291 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
292 { USB_DEVICE(0x1310, 0x0001), .driver_info
= BTUSB_SWAVE
},
294 /* Digianswer devices */
295 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
296 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
298 /* CSR BlueCore Bluetooth Sniffer */
299 { USB_DEVICE(0x0a12, 0x0002),
300 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
302 /* Frontline ComProbe Bluetooth Sniffer */
303 { USB_DEVICE(0x16d3, 0x0002),
304 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
306 /* Marvell Bluetooth devices */
307 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
308 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
310 /* Intel Bluetooth devices */
311 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
312 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
313 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
314 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
316 /* Other Intel Bluetooth devices */
317 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
318 .driver_info
= BTUSB_IGNORE
},
320 /* Realtek Bluetooth devices */
321 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
322 .driver_info
= BTUSB_REALTEK
},
324 /* Additional Realtek 8723AE Bluetooth devices */
325 { USB_DEVICE(0x0930, 0x021d), .driver_info
= BTUSB_REALTEK
},
326 { USB_DEVICE(0x13d3, 0x3394), .driver_info
= BTUSB_REALTEK
},
328 /* Additional Realtek 8723BE Bluetooth devices */
329 { USB_DEVICE(0x0489, 0xe085), .driver_info
= BTUSB_REALTEK
},
330 { USB_DEVICE(0x0489, 0xe08b), .driver_info
= BTUSB_REALTEK
},
331 { USB_DEVICE(0x13d3, 0x3410), .driver_info
= BTUSB_REALTEK
},
332 { USB_DEVICE(0x13d3, 0x3416), .driver_info
= BTUSB_REALTEK
},
333 { USB_DEVICE(0x13d3, 0x3459), .driver_info
= BTUSB_REALTEK
},
335 /* Additional Realtek 8821AE Bluetooth devices */
336 { USB_DEVICE(0x0b05, 0x17dc), .driver_info
= BTUSB_REALTEK
},
337 { USB_DEVICE(0x13d3, 0x3414), .driver_info
= BTUSB_REALTEK
},
338 { USB_DEVICE(0x13d3, 0x3458), .driver_info
= BTUSB_REALTEK
},
339 { USB_DEVICE(0x13d3, 0x3461), .driver_info
= BTUSB_REALTEK
},
340 { USB_DEVICE(0x13d3, 0x3462), .driver_info
= BTUSB_REALTEK
},
342 /* Silicon Wave based devices */
343 { USB_DEVICE(0x0c10, 0x0000), .driver_info
= BTUSB_SWAVE
},
345 { } /* Terminating entry */
348 #define BTUSB_MAX_ISOC_FRAMES 10
350 #define BTUSB_INTR_RUNNING 0
351 #define BTUSB_BULK_RUNNING 1
352 #define BTUSB_ISOC_RUNNING 2
353 #define BTUSB_SUSPENDING 3
354 #define BTUSB_DID_ISO_RESUME 4
355 #define BTUSB_BOOTLOADER 5
356 #define BTUSB_DOWNLOADING 6
357 #define BTUSB_FIRMWARE_LOADED 7
358 #define BTUSB_FIRMWARE_FAILED 8
359 #define BTUSB_BOOTING 9
360 #define BTUSB_RESET_RESUME 10
361 #define BTUSB_DIAG_RUNNING 11
364 struct hci_dev
*hdev
;
365 struct usb_device
*udev
;
366 struct usb_interface
*intf
;
367 struct usb_interface
*isoc
;
368 struct usb_interface
*diag
;
372 struct work_struct work
;
373 struct work_struct waker
;
375 struct usb_anchor deferred
;
376 struct usb_anchor tx_anchor
;
380 struct usb_anchor intr_anchor
;
381 struct usb_anchor bulk_anchor
;
382 struct usb_anchor isoc_anchor
;
383 struct usb_anchor diag_anchor
;
386 struct sk_buff
*evt_skb
;
387 struct sk_buff
*acl_skb
;
388 struct sk_buff
*sco_skb
;
390 struct usb_endpoint_descriptor
*intr_ep
;
391 struct usb_endpoint_descriptor
*bulk_tx_ep
;
392 struct usb_endpoint_descriptor
*bulk_rx_ep
;
393 struct usb_endpoint_descriptor
*isoc_tx_ep
;
394 struct usb_endpoint_descriptor
*isoc_rx_ep
;
395 struct usb_endpoint_descriptor
*diag_tx_ep
;
396 struct usb_endpoint_descriptor
*diag_rx_ep
;
401 unsigned int sco_num
;
405 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
406 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
408 int (*setup_on_usb
)(struct hci_dev
*hdev
);
411 static inline void btusb_free_frags(struct btusb_data
*data
)
415 spin_lock_irqsave(&data
->rxlock
, flags
);
417 kfree_skb(data
->evt_skb
);
418 data
->evt_skb
= NULL
;
420 kfree_skb(data
->acl_skb
);
421 data
->acl_skb
= NULL
;
423 kfree_skb(data
->sco_skb
);
424 data
->sco_skb
= NULL
;
426 spin_unlock_irqrestore(&data
->rxlock
, flags
);
429 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
434 spin_lock(&data
->rxlock
);
441 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
447 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
448 hci_skb_expect(skb
) = HCI_EVENT_HDR_SIZE
;
451 len
= min_t(uint
, hci_skb_expect(skb
), count
);
452 memcpy(skb_put(skb
, len
), buffer
, len
);
456 hci_skb_expect(skb
) -= len
;
458 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
459 /* Complete event header */
460 hci_skb_expect(skb
) = hci_event_hdr(skb
)->plen
;
462 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
471 if (!hci_skb_expect(skb
)) {
473 data
->recv_event(data
->hdev
, skb
);
479 spin_unlock(&data
->rxlock
);
484 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
489 spin_lock(&data
->rxlock
);
496 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
502 hci_skb_pkt_type(skb
) = HCI_ACLDATA_PKT
;
503 hci_skb_expect(skb
) = HCI_ACL_HDR_SIZE
;
506 len
= min_t(uint
, hci_skb_expect(skb
), count
);
507 memcpy(skb_put(skb
, len
), buffer
, len
);
511 hci_skb_expect(skb
) -= len
;
513 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
514 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
516 /* Complete ACL header */
517 hci_skb_expect(skb
) = __le16_to_cpu(dlen
);
519 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
528 if (!hci_skb_expect(skb
)) {
530 hci_recv_frame(data
->hdev
, skb
);
536 spin_unlock(&data
->rxlock
);
541 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
546 spin_lock(&data
->rxlock
);
553 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
559 hci_skb_pkt_type(skb
) = HCI_SCODATA_PKT
;
560 hci_skb_expect(skb
) = HCI_SCO_HDR_SIZE
;
563 len
= min_t(uint
, hci_skb_expect(skb
), count
);
564 memcpy(skb_put(skb
, len
), buffer
, len
);
568 hci_skb_expect(skb
) -= len
;
570 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
571 /* Complete SCO header */
572 hci_skb_expect(skb
) = hci_sco_hdr(skb
)->dlen
;
574 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
583 if (!hci_skb_expect(skb
)) {
585 hci_recv_frame(data
->hdev
, skb
);
591 spin_unlock(&data
->rxlock
);
596 static void btusb_intr_complete(struct urb
*urb
)
598 struct hci_dev
*hdev
= urb
->context
;
599 struct btusb_data
*data
= hci_get_drvdata(hdev
);
602 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
605 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
608 if (urb
->status
== 0) {
609 hdev
->stat
.byte_rx
+= urb
->actual_length
;
611 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
612 urb
->actual_length
) < 0) {
613 BT_ERR("%s corrupted event packet", hdev
->name
);
616 } else if (urb
->status
== -ENOENT
) {
617 /* Avoid suspend failed when usb_kill_urb */
621 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
624 usb_mark_last_busy(data
->udev
);
625 usb_anchor_urb(urb
, &data
->intr_anchor
);
627 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
629 /* -EPERM: urb is being killed;
630 * -ENODEV: device got disconnected */
631 if (err
!= -EPERM
&& err
!= -ENODEV
)
632 BT_ERR("%s urb %p failed to resubmit (%d)",
633 hdev
->name
, urb
, -err
);
634 usb_unanchor_urb(urb
);
638 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
640 struct btusb_data
*data
= hci_get_drvdata(hdev
);
646 BT_DBG("%s", hdev
->name
);
651 urb
= usb_alloc_urb(0, mem_flags
);
655 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
657 buf
= kmalloc(size
, mem_flags
);
663 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
665 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
666 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
668 urb
->transfer_flags
|= URB_FREE_BUFFER
;
670 usb_anchor_urb(urb
, &data
->intr_anchor
);
672 err
= usb_submit_urb(urb
, mem_flags
);
674 if (err
!= -EPERM
&& err
!= -ENODEV
)
675 BT_ERR("%s urb %p submission failed (%d)",
676 hdev
->name
, urb
, -err
);
677 usb_unanchor_urb(urb
);
685 static void btusb_bulk_complete(struct urb
*urb
)
687 struct hci_dev
*hdev
= urb
->context
;
688 struct btusb_data
*data
= hci_get_drvdata(hdev
);
691 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
694 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
697 if (urb
->status
== 0) {
698 hdev
->stat
.byte_rx
+= urb
->actual_length
;
700 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
701 urb
->actual_length
) < 0) {
702 BT_ERR("%s corrupted ACL packet", hdev
->name
);
705 } else if (urb
->status
== -ENOENT
) {
706 /* Avoid suspend failed when usb_kill_urb */
710 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
713 usb_anchor_urb(urb
, &data
->bulk_anchor
);
714 usb_mark_last_busy(data
->udev
);
716 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
718 /* -EPERM: urb is being killed;
719 * -ENODEV: device got disconnected */
720 if (err
!= -EPERM
&& err
!= -ENODEV
)
721 BT_ERR("%s urb %p failed to resubmit (%d)",
722 hdev
->name
, urb
, -err
);
723 usb_unanchor_urb(urb
);
727 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
729 struct btusb_data
*data
= hci_get_drvdata(hdev
);
733 int err
, size
= HCI_MAX_FRAME_SIZE
;
735 BT_DBG("%s", hdev
->name
);
737 if (!data
->bulk_rx_ep
)
740 urb
= usb_alloc_urb(0, mem_flags
);
744 buf
= kmalloc(size
, mem_flags
);
750 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
752 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
753 btusb_bulk_complete
, hdev
);
755 urb
->transfer_flags
|= URB_FREE_BUFFER
;
757 usb_mark_last_busy(data
->udev
);
758 usb_anchor_urb(urb
, &data
->bulk_anchor
);
760 err
= usb_submit_urb(urb
, mem_flags
);
762 if (err
!= -EPERM
&& err
!= -ENODEV
)
763 BT_ERR("%s urb %p submission failed (%d)",
764 hdev
->name
, urb
, -err
);
765 usb_unanchor_urb(urb
);
773 static void btusb_isoc_complete(struct urb
*urb
)
775 struct hci_dev
*hdev
= urb
->context
;
776 struct btusb_data
*data
= hci_get_drvdata(hdev
);
779 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
782 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
785 if (urb
->status
== 0) {
786 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
787 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
788 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
790 if (urb
->iso_frame_desc
[i
].status
)
793 hdev
->stat
.byte_rx
+= length
;
795 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
797 BT_ERR("%s corrupted SCO packet", hdev
->name
);
801 } else if (urb
->status
== -ENOENT
) {
802 /* Avoid suspend failed when usb_kill_urb */
806 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
809 usb_anchor_urb(urb
, &data
->isoc_anchor
);
811 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
813 /* -EPERM: urb is being killed;
814 * -ENODEV: device got disconnected */
815 if (err
!= -EPERM
&& err
!= -ENODEV
)
816 BT_ERR("%s urb %p failed to resubmit (%d)",
817 hdev
->name
, urb
, -err
);
818 usb_unanchor_urb(urb
);
822 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
826 BT_DBG("len %d mtu %d", len
, mtu
);
828 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
829 i
++, offset
+= mtu
, len
-= mtu
) {
830 urb
->iso_frame_desc
[i
].offset
= offset
;
831 urb
->iso_frame_desc
[i
].length
= mtu
;
834 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
835 urb
->iso_frame_desc
[i
].offset
= offset
;
836 urb
->iso_frame_desc
[i
].length
= len
;
840 urb
->number_of_packets
= i
;
843 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
845 struct btusb_data
*data
= hci_get_drvdata(hdev
);
851 BT_DBG("%s", hdev
->name
);
853 if (!data
->isoc_rx_ep
)
856 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
860 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
861 BTUSB_MAX_ISOC_FRAMES
;
863 buf
= kmalloc(size
, mem_flags
);
869 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
871 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
872 hdev
, data
->isoc_rx_ep
->bInterval
);
874 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
876 __fill_isoc_descriptor(urb
, size
,
877 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
879 usb_anchor_urb(urb
, &data
->isoc_anchor
);
881 err
= usb_submit_urb(urb
, mem_flags
);
883 if (err
!= -EPERM
&& err
!= -ENODEV
)
884 BT_ERR("%s urb %p submission failed (%d)",
885 hdev
->name
, urb
, -err
);
886 usb_unanchor_urb(urb
);
894 static void btusb_diag_complete(struct urb
*urb
)
896 struct hci_dev
*hdev
= urb
->context
;
897 struct btusb_data
*data
= hci_get_drvdata(hdev
);
900 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
903 if (urb
->status
== 0) {
906 skb
= bt_skb_alloc(urb
->actual_length
, GFP_ATOMIC
);
908 memcpy(skb_put(skb
, urb
->actual_length
),
909 urb
->transfer_buffer
, urb
->actual_length
);
910 hci_recv_diag(hdev
, skb
);
912 } else if (urb
->status
== -ENOENT
) {
913 /* Avoid suspend failed when usb_kill_urb */
917 if (!test_bit(BTUSB_DIAG_RUNNING
, &data
->flags
))
920 usb_anchor_urb(urb
, &data
->diag_anchor
);
921 usb_mark_last_busy(data
->udev
);
923 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
925 /* -EPERM: urb is being killed;
926 * -ENODEV: device got disconnected */
927 if (err
!= -EPERM
&& err
!= -ENODEV
)
928 BT_ERR("%s urb %p failed to resubmit (%d)",
929 hdev
->name
, urb
, -err
);
930 usb_unanchor_urb(urb
);
934 static int btusb_submit_diag_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
936 struct btusb_data
*data
= hci_get_drvdata(hdev
);
940 int err
, size
= HCI_MAX_FRAME_SIZE
;
942 BT_DBG("%s", hdev
->name
);
944 if (!data
->diag_rx_ep
)
947 urb
= usb_alloc_urb(0, mem_flags
);
951 buf
= kmalloc(size
, mem_flags
);
957 pipe
= usb_rcvbulkpipe(data
->udev
, data
->diag_rx_ep
->bEndpointAddress
);
959 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
960 btusb_diag_complete
, hdev
);
962 urb
->transfer_flags
|= URB_FREE_BUFFER
;
964 usb_mark_last_busy(data
->udev
);
965 usb_anchor_urb(urb
, &data
->diag_anchor
);
967 err
= usb_submit_urb(urb
, mem_flags
);
969 if (err
!= -EPERM
&& err
!= -ENODEV
)
970 BT_ERR("%s urb %p submission failed (%d)",
971 hdev
->name
, urb
, -err
);
972 usb_unanchor_urb(urb
);
980 static void btusb_tx_complete(struct urb
*urb
)
982 struct sk_buff
*skb
= urb
->context
;
983 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
984 struct btusb_data
*data
= hci_get_drvdata(hdev
);
986 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
989 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
993 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
998 spin_lock(&data
->txlock
);
999 data
->tx_in_flight
--;
1000 spin_unlock(&data
->txlock
);
1002 kfree(urb
->setup_packet
);
1007 static void btusb_isoc_tx_complete(struct urb
*urb
)
1009 struct sk_buff
*skb
= urb
->context
;
1010 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
1012 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
1013 urb
->actual_length
);
1015 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1019 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1021 hdev
->stat
.err_tx
++;
1024 kfree(urb
->setup_packet
);
1029 static int btusb_open(struct hci_dev
*hdev
)
1031 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1034 BT_DBG("%s", hdev
->name
);
1036 /* Patching USB firmware files prior to starting any URBs of HCI path
1037 * It is more safe to use USB bulk channel for downloading USB patch
1039 if (data
->setup_on_usb
) {
1040 err
= data
->setup_on_usb(hdev
);
1045 err
= usb_autopm_get_interface(data
->intf
);
1049 data
->intf
->needs_remote_wakeup
= 1;
1051 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
1054 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
1058 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1060 usb_kill_anchored_urbs(&data
->intr_anchor
);
1064 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1065 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1068 if (!btusb_submit_diag_urb(hdev
, GFP_KERNEL
))
1069 set_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1073 usb_autopm_put_interface(data
->intf
);
1077 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1078 usb_autopm_put_interface(data
->intf
);
1082 static void btusb_stop_traffic(struct btusb_data
*data
)
1084 usb_kill_anchored_urbs(&data
->intr_anchor
);
1085 usb_kill_anchored_urbs(&data
->bulk_anchor
);
1086 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1087 usb_kill_anchored_urbs(&data
->diag_anchor
);
1090 static int btusb_close(struct hci_dev
*hdev
)
1092 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1095 BT_DBG("%s", hdev
->name
);
1097 cancel_work_sync(&data
->work
);
1098 cancel_work_sync(&data
->waker
);
1100 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1101 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1102 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1103 clear_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1105 btusb_stop_traffic(data
);
1106 btusb_free_frags(data
);
1108 err
= usb_autopm_get_interface(data
->intf
);
1112 data
->intf
->needs_remote_wakeup
= 0;
1113 usb_autopm_put_interface(data
->intf
);
1116 usb_scuttle_anchored_urbs(&data
->deferred
);
1120 static int btusb_flush(struct hci_dev
*hdev
)
1122 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1124 BT_DBG("%s", hdev
->name
);
1126 usb_kill_anchored_urbs(&data
->tx_anchor
);
1127 btusb_free_frags(data
);
1132 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1134 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1135 struct usb_ctrlrequest
*dr
;
1139 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1141 return ERR_PTR(-ENOMEM
);
1143 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
1146 return ERR_PTR(-ENOMEM
);
1149 dr
->bRequestType
= data
->cmdreq_type
;
1150 dr
->bRequest
= data
->cmdreq
;
1153 dr
->wLength
= __cpu_to_le16(skb
->len
);
1155 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1157 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1158 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1160 skb
->dev
= (void *)hdev
;
1165 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1167 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1171 if (!data
->bulk_tx_ep
)
1172 return ERR_PTR(-ENODEV
);
1174 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1176 return ERR_PTR(-ENOMEM
);
1178 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1180 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1181 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1183 skb
->dev
= (void *)hdev
;
1188 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1190 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1194 if (!data
->isoc_tx_ep
)
1195 return ERR_PTR(-ENODEV
);
1197 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1199 return ERR_PTR(-ENOMEM
);
1201 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1203 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1204 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1205 skb
, data
->isoc_tx_ep
->bInterval
);
1207 urb
->transfer_flags
= URB_ISO_ASAP
;
1209 __fill_isoc_descriptor(urb
, skb
->len
,
1210 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1212 skb
->dev
= (void *)hdev
;
1217 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1219 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1222 usb_anchor_urb(urb
, &data
->tx_anchor
);
1224 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1226 if (err
!= -EPERM
&& err
!= -ENODEV
)
1227 BT_ERR("%s urb %p submission failed (%d)",
1228 hdev
->name
, urb
, -err
);
1229 kfree(urb
->setup_packet
);
1230 usb_unanchor_urb(urb
);
1232 usb_mark_last_busy(data
->udev
);
1239 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1241 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1242 unsigned long flags
;
1245 spin_lock_irqsave(&data
->txlock
, flags
);
1246 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1248 data
->tx_in_flight
++;
1249 spin_unlock_irqrestore(&data
->txlock
, flags
);
1252 return submit_tx_urb(hdev
, urb
);
1254 usb_anchor_urb(urb
, &data
->deferred
);
1255 schedule_work(&data
->waker
);
1261 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1265 BT_DBG("%s", hdev
->name
);
1267 switch (hci_skb_pkt_type(skb
)) {
1268 case HCI_COMMAND_PKT
:
1269 urb
= alloc_ctrl_urb(hdev
, skb
);
1271 return PTR_ERR(urb
);
1273 hdev
->stat
.cmd_tx
++;
1274 return submit_or_queue_tx_urb(hdev
, urb
);
1276 case HCI_ACLDATA_PKT
:
1277 urb
= alloc_bulk_urb(hdev
, skb
);
1279 return PTR_ERR(urb
);
1281 hdev
->stat
.acl_tx
++;
1282 return submit_or_queue_tx_urb(hdev
, urb
);
1284 case HCI_SCODATA_PKT
:
1285 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1288 urb
= alloc_isoc_urb(hdev
, skb
);
1290 return PTR_ERR(urb
);
1292 hdev
->stat
.sco_tx
++;
1293 return submit_tx_urb(hdev
, urb
);
1299 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1301 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1303 BT_DBG("%s evt %d", hdev
->name
, evt
);
1305 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1306 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1307 schedule_work(&data
->work
);
1311 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1313 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1314 struct usb_interface
*intf
= data
->isoc
;
1315 struct usb_endpoint_descriptor
*ep_desc
;
1321 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1323 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1327 data
->isoc_altsetting
= altsetting
;
1329 data
->isoc_tx_ep
= NULL
;
1330 data
->isoc_rx_ep
= NULL
;
1332 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1333 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1335 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1336 data
->isoc_tx_ep
= ep_desc
;
1340 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1341 data
->isoc_rx_ep
= ep_desc
;
1346 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1347 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1354 static void btusb_work(struct work_struct
*work
)
1356 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1357 struct hci_dev
*hdev
= data
->hdev
;
1361 if (data
->sco_num
> 0) {
1362 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1363 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1365 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1366 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1370 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1373 if (hdev
->voice_setting
& 0x0020) {
1374 static const int alts
[3] = { 2, 4, 5 };
1376 new_alts
= alts
[data
->sco_num
- 1];
1378 new_alts
= data
->sco_num
;
1381 if (data
->isoc_altsetting
!= new_alts
) {
1382 unsigned long flags
;
1384 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1385 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1387 /* When isochronous alternate setting needs to be
1388 * changed, because SCO connection has been added
1389 * or removed, a packet fragment may be left in the
1390 * reassembling state. This could lead to wrongly
1391 * assembled fragments.
1393 * Clear outstanding fragment when selecting a new
1394 * alternate setting.
1396 spin_lock_irqsave(&data
->rxlock
, flags
);
1397 kfree_skb(data
->sco_skb
);
1398 data
->sco_skb
= NULL
;
1399 spin_unlock_irqrestore(&data
->rxlock
, flags
);
1401 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1405 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1406 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1407 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1409 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1412 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1413 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1415 __set_isoc_interface(hdev
, 0);
1416 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1417 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1421 static void btusb_waker(struct work_struct
*work
)
1423 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1426 err
= usb_autopm_get_interface(data
->intf
);
1430 usb_autopm_put_interface(data
->intf
);
1433 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1435 struct sk_buff
*skb
;
1438 BT_DBG("%s", hdev
->name
);
1440 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1442 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1449 static int btusb_setup_csr(struct hci_dev
*hdev
)
1451 struct hci_rp_read_local_version
*rp
;
1452 struct sk_buff
*skb
;
1454 BT_DBG("%s", hdev
->name
);
1456 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1459 int err
= PTR_ERR(skb
);
1460 BT_ERR("%s: CSR: Local version failed (%d)", hdev
->name
, err
);
1464 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1465 BT_ERR("%s: CSR: Local version length mismatch", hdev
->name
);
1470 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1472 /* Detect controllers which aren't real CSR ones. */
1473 if (le16_to_cpu(rp
->manufacturer
) != 10 ||
1474 le16_to_cpu(rp
->lmp_subver
) == 0x0c5c) {
1475 /* Clear the reset quirk since this is not an actual
1476 * early Bluetooth 1.1 device from CSR.
1478 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1480 /* These fake CSR controllers have all a broken
1481 * stored link key handling and so just disable it.
1483 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
1491 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1492 struct intel_version
*ver
)
1494 const struct firmware
*fw
;
1498 snprintf(fwname
, sizeof(fwname
),
1499 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1500 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1501 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1502 ver
->fw_build_ww
, ver
->fw_build_yy
);
1504 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1506 if (ret
== -EINVAL
) {
1507 BT_ERR("%s Intel firmware file request failed (%d)",
1512 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1513 hdev
->name
, fwname
, ret
);
1515 /* If the correct firmware patch file is not found, use the
1516 * default firmware patch file instead
1518 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1519 ver
->hw_platform
, ver
->hw_variant
);
1520 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1521 BT_ERR("%s failed to open default Intel fw file: %s",
1522 hdev
->name
, fwname
);
1527 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1532 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1533 const struct firmware
*fw
,
1534 const u8
**fw_ptr
, int *disable_patch
)
1536 struct sk_buff
*skb
;
1537 struct hci_command_hdr
*cmd
;
1538 const u8
*cmd_param
;
1539 struct hci_event_hdr
*evt
= NULL
;
1540 const u8
*evt_param
= NULL
;
1541 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1543 /* The first byte indicates the types of the patch command or event.
1544 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1545 * in the current firmware buffer doesn't start with 0x01 or
1546 * the size of remain buffer is smaller than HCI command header,
1547 * the firmware file is corrupted and it should stop the patching
1550 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1551 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1557 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1558 *fw_ptr
+= sizeof(*cmd
);
1559 remain
-= sizeof(*cmd
);
1561 /* Ensure that the remain firmware data is long enough than the length
1562 * of command parameter. If not, the firmware file is corrupted.
1564 if (remain
< cmd
->plen
) {
1565 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1569 /* If there is a command that loads a patch in the firmware
1570 * file, then enable the patch upon success, otherwise just
1571 * disable the manufacturer mode, for example patch activation
1572 * is not required when the default firmware patch file is used
1573 * because there are no patch data to load.
1575 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1578 cmd_param
= *fw_ptr
;
1579 *fw_ptr
+= cmd
->plen
;
1580 remain
-= cmd
->plen
;
1582 /* This reads the expected events when the above command is sent to the
1583 * device. Some vendor commands expects more than one events, for
1584 * example command status event followed by vendor specific event.
1585 * For this case, it only keeps the last expected event. so the command
1586 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1587 * last expected event.
1589 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1593 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1594 *fw_ptr
+= sizeof(*evt
);
1595 remain
-= sizeof(*evt
);
1597 if (remain
< evt
->plen
) {
1598 BT_ERR("%s Intel fw corrupted: invalid evt len",
1603 evt_param
= *fw_ptr
;
1604 *fw_ptr
+= evt
->plen
;
1605 remain
-= evt
->plen
;
1608 /* Every HCI commands in the firmware file has its correspond event.
1609 * If event is not found or remain is smaller than zero, the firmware
1610 * file is corrupted.
1612 if (!evt
|| !evt_param
|| remain
< 0) {
1613 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1617 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1618 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1620 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1621 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1622 return PTR_ERR(skb
);
1625 /* It ensures that the returned event matches the event data read from
1626 * the firmware file. At fist, it checks the length and then
1627 * the contents of the event.
1629 if (skb
->len
!= evt
->plen
) {
1630 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1631 le16_to_cpu(cmd
->opcode
));
1636 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1637 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1638 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1647 static int btusb_setup_intel(struct hci_dev
*hdev
)
1649 struct sk_buff
*skb
;
1650 const struct firmware
*fw
;
1652 int disable_patch
, err
;
1653 struct intel_version ver
;
1655 BT_DBG("%s", hdev
->name
);
1657 /* The controller has a bug with the first HCI command sent to it
1658 * returning number of completed commands as zero. This would stall the
1659 * command processing in the Bluetooth core.
1661 * As a workaround, send HCI Reset command first which will reset the
1662 * number of completed commands and allow normal command processing
1665 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1667 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1668 hdev
->name
, PTR_ERR(skb
));
1669 return PTR_ERR(skb
);
1673 /* Read Intel specific controller version first to allow selection of
1674 * which firmware file to load.
1676 * The returned information are hardware variant and revision plus
1677 * firmware variant, revision and build number.
1679 err
= btintel_read_version(hdev
, &ver
);
1683 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1684 hdev
->name
, ver
.hw_platform
, ver
.hw_variant
, ver
.hw_revision
,
1685 ver
.fw_variant
, ver
.fw_revision
, ver
.fw_build_num
,
1686 ver
.fw_build_ww
, ver
.fw_build_yy
, ver
.fw_patch_num
);
1688 /* fw_patch_num indicates the version of patch the device currently
1689 * have. If there is no patch data in the device, it is always 0x00.
1690 * So, if it is other than 0x00, no need to patch the device again.
1692 if (ver
.fw_patch_num
) {
1693 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1694 hdev
->name
, ver
.fw_patch_num
);
1698 /* Opens the firmware patch file based on the firmware version read
1699 * from the controller. If it fails to open the matching firmware
1700 * patch file, it tries to open the default firmware patch file.
1701 * If no patch file is found, allow the device to operate without
1704 fw
= btusb_setup_intel_get_fw(hdev
, &ver
);
1709 /* Enable the manufacturer mode of the controller.
1710 * Only while this mode is enabled, the driver can download the
1711 * firmware patch data and configuration parameters.
1713 err
= btintel_enter_mfg(hdev
);
1715 release_firmware(fw
);
1721 /* The firmware data file consists of list of Intel specific HCI
1722 * commands and its expected events. The first byte indicates the
1723 * type of the message, either HCI command or HCI event.
1725 * It reads the command and its expected event from the firmware file,
1726 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1727 * the returned event is compared with the event read from the firmware
1728 * file and it will continue until all the messages are downloaded to
1731 * Once the firmware patching is completed successfully,
1732 * the manufacturer mode is disabled with reset and activating the
1735 * If the firmware patching fails, the manufacturer mode is
1736 * disabled with reset and deactivating the patch.
1738 * If the default patch file is used, no reset is done when disabling
1741 while (fw
->size
> fw_ptr
- fw
->data
) {
1744 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
1747 goto exit_mfg_deactivate
;
1750 release_firmware(fw
);
1753 goto exit_mfg_disable
;
1755 /* Patching completed successfully and disable the manufacturer mode
1756 * with reset and activate the downloaded firmware patches.
1758 err
= btintel_exit_mfg(hdev
, true, true);
1762 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1768 /* Disable the manufacturer mode without reset */
1769 err
= btintel_exit_mfg(hdev
, false, false);
1773 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
1777 exit_mfg_deactivate
:
1778 release_firmware(fw
);
1780 /* Patching failed. Disable the manufacturer mode with reset and
1781 * deactivate the downloaded firmware patches.
1783 err
= btintel_exit_mfg(hdev
, true, false);
1787 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1791 /* Set the event mask for Intel specific vendor events. This enables
1792 * a few extra events that are useful during general operation.
1794 btintel_set_event_mask_mfg(hdev
, false);
1796 btintel_check_bdaddr(hdev
);
1800 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
1802 struct sk_buff
*skb
;
1803 struct hci_event_hdr
*hdr
;
1804 struct hci_ev_cmd_complete
*evt
;
1806 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
1810 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
1811 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
1812 hdr
->plen
= sizeof(*evt
) + 1;
1814 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
1816 evt
->opcode
= cpu_to_le16(opcode
);
1818 *skb_put(skb
, 1) = 0x00;
1820 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
1822 return hci_recv_frame(hdev
, skb
);
1825 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
1828 /* When the device is in bootloader mode, then it can send
1829 * events via the bulk endpoint. These events are treated the
1830 * same way as the ones received from the interrupt endpoint.
1832 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
1833 return btusb_recv_intr(data
, buffer
, count
);
1835 return btusb_recv_bulk(data
, buffer
, count
);
1838 static void btusb_intel_bootup(struct btusb_data
*data
, const void *ptr
,
1841 const struct intel_bootup
*evt
= ptr
;
1843 if (len
!= sizeof(*evt
))
1846 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
1847 smp_mb__after_atomic();
1848 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
1852 static void btusb_intel_secure_send_result(struct btusb_data
*data
,
1853 const void *ptr
, unsigned int len
)
1855 const struct intel_secure_send_result
*evt
= ptr
;
1857 if (len
!= sizeof(*evt
))
1861 set_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
1863 if (test_and_clear_bit(BTUSB_DOWNLOADING
, &data
->flags
) &&
1864 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
1865 smp_mb__after_atomic();
1866 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
1870 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1872 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1874 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1875 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
1877 if (skb
->len
> HCI_EVENT_HDR_SIZE
&& hdr
->evt
== 0xff &&
1879 const void *ptr
= skb
->data
+ HCI_EVENT_HDR_SIZE
+ 1;
1880 unsigned int len
= skb
->len
- HCI_EVENT_HDR_SIZE
- 1;
1882 switch (skb
->data
[2]) {
1884 /* When switching to the operational firmware
1885 * the device sends a vendor specific event
1886 * indicating that the bootup completed.
1888 btusb_intel_bootup(data
, ptr
, len
);
1891 /* When the firmware loading completes the
1892 * device sends out a vendor specific event
1893 * indicating the result of the firmware
1896 btusb_intel_secure_send_result(data
, ptr
, len
);
1902 return hci_recv_frame(hdev
, skb
);
1905 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1907 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1910 BT_DBG("%s", hdev
->name
);
1912 switch (hci_skb_pkt_type(skb
)) {
1913 case HCI_COMMAND_PKT
:
1914 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1915 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
1916 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
1918 /* When in bootloader mode and the command 0xfc09
1919 * is received, it needs to be send down the
1920 * bulk endpoint. So allocate a bulk URB instead.
1922 if (opcode
== 0xfc09)
1923 urb
= alloc_bulk_urb(hdev
, skb
);
1925 urb
= alloc_ctrl_urb(hdev
, skb
);
1927 /* When the 0xfc01 command is issued to boot into
1928 * the operational firmware, it will actually not
1929 * send a command complete event. To keep the flow
1930 * control working inject that event here.
1932 if (opcode
== 0xfc01)
1933 inject_cmd_complete(hdev
, opcode
);
1935 urb
= alloc_ctrl_urb(hdev
, skb
);
1938 return PTR_ERR(urb
);
1940 hdev
->stat
.cmd_tx
++;
1941 return submit_or_queue_tx_urb(hdev
, urb
);
1943 case HCI_ACLDATA_PKT
:
1944 urb
= alloc_bulk_urb(hdev
, skb
);
1946 return PTR_ERR(urb
);
1948 hdev
->stat
.acl_tx
++;
1949 return submit_or_queue_tx_urb(hdev
, urb
);
1951 case HCI_SCODATA_PKT
:
1952 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1955 urb
= alloc_isoc_urb(hdev
, skb
);
1957 return PTR_ERR(urb
);
1959 hdev
->stat
.sco_tx
++;
1960 return submit_tx_urb(hdev
, urb
);
1966 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
1968 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
1969 0x00, 0x08, 0x04, 0x00 };
1970 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1971 struct sk_buff
*skb
;
1972 struct intel_version ver
;
1973 struct intel_boot_params
*params
;
1974 const struct firmware
*fw
;
1978 ktime_t calltime
, delta
, rettime
;
1979 unsigned long long duration
;
1982 BT_DBG("%s", hdev
->name
);
1984 calltime
= ktime_get();
1986 /* Read the Intel version information to determine if the device
1987 * is in bootloader mode or if it already has operational firmware
1990 err
= btintel_read_version(hdev
, &ver
);
1994 /* The hardware platform number has a fixed value of 0x37 and
1995 * for now only accept this single value.
1997 if (ver
.hw_platform
!= 0x37) {
1998 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
1999 hdev
->name
, ver
.hw_platform
);
2003 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2004 * supported by this firmware loading method. This check has been
2005 * put in place to ensure correct forward compatibility options
2006 * when newer hardware variants come along.
2008 if (ver
.hw_variant
!= 0x0b) {
2009 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2010 hdev
->name
, ver
.hw_variant
);
2014 btintel_version_info(hdev
, &ver
);
2016 /* The firmware variant determines if the device is in bootloader
2017 * mode or is running operational firmware. The value 0x06 identifies
2018 * the bootloader and the value 0x23 identifies the operational
2021 * When the operational firmware is already present, then only
2022 * the check for valid Bluetooth device address is needed. This
2023 * determines if the device will be added as configured or
2024 * unconfigured controller.
2026 * It is not possible to use the Secure Boot Parameters in this
2027 * case since that command is only available in bootloader mode.
2029 if (ver
.fw_variant
== 0x23) {
2030 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2031 btintel_check_bdaddr(hdev
);
2035 /* If the device is not in bootloader mode, then the only possible
2036 * choice is to return an error and abort the device initialization.
2038 if (ver
.fw_variant
!= 0x06) {
2039 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2040 hdev
->name
, ver
.fw_variant
);
2044 /* Read the secure boot parameters to identify the operating
2045 * details of the bootloader.
2047 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2049 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2050 hdev
->name
, PTR_ERR(skb
));
2051 return PTR_ERR(skb
);
2054 if (skb
->len
!= sizeof(*params
)) {
2055 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2060 params
= (struct intel_boot_params
*)skb
->data
;
2062 BT_INFO("%s: Device revision is %u", hdev
->name
,
2063 le16_to_cpu(params
->dev_revid
));
2065 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2066 params
->secure_boot
? "enabled" : "disabled");
2068 BT_INFO("%s: OTP lock is %s", hdev
->name
,
2069 params
->otp_lock
? "enabled" : "disabled");
2071 BT_INFO("%s: API lock is %s", hdev
->name
,
2072 params
->api_lock
? "enabled" : "disabled");
2074 BT_INFO("%s: Debug lock is %s", hdev
->name
,
2075 params
->debug_lock
? "enabled" : "disabled");
2077 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2078 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2079 2000 + params
->min_fw_build_yy
);
2081 /* It is required that every single firmware fragment is acknowledged
2082 * with a command complete event. If the boot parameters indicate
2083 * that this bootloader does not send them, then abort the setup.
2085 if (params
->limited_cce
!= 0x00) {
2086 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2087 hdev
->name
, params
->limited_cce
);
2092 /* If the OTP has no valid Bluetooth device address, then there will
2093 * also be no valid address for the operational firmware.
2095 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2096 BT_INFO("%s: No device address configured", hdev
->name
);
2097 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2100 /* With this Intel bootloader only the hardware variant and device
2101 * revision information are used to select the right firmware.
2103 * Currently this bootloader support is limited to hardware variant
2104 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2106 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.sfi",
2107 le16_to_cpu(params
->dev_revid
));
2109 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2111 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2117 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2119 /* Save the DDC file name for later use to apply once the firmware
2120 * downloading is done.
2122 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.ddc",
2123 le16_to_cpu(params
->dev_revid
));
2127 if (fw
->size
< 644) {
2128 BT_ERR("%s: Invalid size of firmware file (%zu)",
2129 hdev
->name
, fw
->size
);
2134 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2136 /* Start the firmware download transaction with the Init fragment
2137 * represented by the 128 bytes of CSS header.
2139 err
= btintel_secure_send(hdev
, 0x00, 128, fw
->data
);
2141 BT_ERR("%s: Failed to send firmware header (%d)",
2146 /* Send the 256 bytes of public key information from the firmware
2147 * as the PKey fragment.
2149 err
= btintel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2151 BT_ERR("%s: Failed to send firmware public key (%d)",
2156 /* Send the 256 bytes of signature information from the firmware
2157 * as the Sign fragment.
2159 err
= btintel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2161 BT_ERR("%s: Failed to send firmware signature (%d)",
2166 fw_ptr
= fw
->data
+ 644;
2169 while (fw_ptr
- fw
->data
< fw
->size
) {
2170 struct hci_command_hdr
*cmd
= (void *)(fw_ptr
+ frag_len
);
2172 frag_len
+= sizeof(*cmd
) + cmd
->plen
;
2174 /* The parameter length of the secure send command requires
2175 * a 4 byte alignment. It happens so that the firmware file
2176 * contains proper Intel_NOP commands to align the fragments
2179 * Send set of commands with 4 byte alignment from the
2180 * firmware data buffer as a single Data fragement.
2182 if (!(frag_len
% 4)) {
2183 err
= btintel_secure_send(hdev
, 0x01, frag_len
, fw_ptr
);
2185 BT_ERR("%s: Failed to send firmware data (%d)",
2195 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2197 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2199 /* Before switching the device into operational mode and with that
2200 * booting the loaded firmware, wait for the bootloader notification
2201 * that all fragments have been successfully received.
2203 * When the event processing receives the notification, then the
2204 * BTUSB_DOWNLOADING flag will be cleared.
2206 * The firmware loading should not take longer than 5 seconds
2207 * and thus just timeout if that happens and fail the setup
2210 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2212 msecs_to_jiffies(5000));
2214 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2220 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2225 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2226 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2231 rettime
= ktime_get();
2232 delta
= ktime_sub(rettime
, calltime
);
2233 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2235 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2238 release_firmware(fw
);
2243 calltime
= ktime_get();
2245 set_bit(BTUSB_BOOTING
, &data
->flags
);
2247 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2250 return PTR_ERR(skb
);
2254 /* The bootloader will not indicate when the device is ready. This
2255 * is done by the operational firmware sending bootup notification.
2257 * Booting into operational firmware should not take longer than
2258 * 1 second. However if that happens, then just fail the setup
2259 * since something went wrong.
2261 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2263 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2265 msecs_to_jiffies(1000));
2268 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2273 BT_ERR("%s: Device boot timeout", hdev
->name
);
2277 rettime
= ktime_get();
2278 delta
= ktime_sub(rettime
, calltime
);
2279 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2281 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2283 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2285 /* Once the device is running in operational mode, it needs to apply
2286 * the device configuration (DDC) parameters.
2288 * The device can work without DDC parameters, so even if it fails
2289 * to load the file, no need to fail the setup.
2291 btintel_load_ddc_config(hdev
, fwname
);
2293 /* Set the event mask for Intel specific vendor events. This enables
2294 * a few extra events that are useful during general operation. It
2295 * does not enable any debugging related events.
2297 * The device will function correctly without these events enabled
2298 * and thus no need to fail the setup.
2300 btintel_set_event_mask(hdev
, false);
2305 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2307 struct sk_buff
*skb
;
2310 /* Some platforms have an issue with BT LED when the interface is
2311 * down or BT radio is turned off, which takes 5 seconds to BT LED
2312 * goes off. This command turns off the BT LED immediately.
2314 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2317 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2326 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2327 const bdaddr_t
*bdaddr
)
2329 struct sk_buff
*skb
;
2334 buf
[1] = sizeof(bdaddr_t
);
2335 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2337 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2340 BT_ERR("%s: changing Marvell device address failed (%ld)",
2349 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2350 const bdaddr_t
*bdaddr
)
2352 struct sk_buff
*skb
;
2359 buf
[3] = sizeof(bdaddr_t
);
2360 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2362 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2365 BT_ERR("%s: Change address command failed (%ld)",
2374 #define QCA_DFU_PACKET_LEN 4096
2376 #define QCA_GET_TARGET_VERSION 0x09
2377 #define QCA_CHECK_STATUS 0x05
2378 #define QCA_DFU_DOWNLOAD 0x01
2380 #define QCA_SYSCFG_UPDATED 0x40
2381 #define QCA_PATCH_UPDATED 0x80
2382 #define QCA_DFU_TIMEOUT 3000
2384 struct qca_version
{
2386 __le32 patch_version
;
2392 struct qca_rampatch_version
{
2394 __le16 patch_version
;
2397 struct qca_device_info
{
2399 u8 rampatch_hdr
; /* length of header in rampatch */
2400 u8 nvm_hdr
; /* length of header in NVM */
2401 u8 ver_offset
; /* offset of version structure in rampatch */
2404 static const struct qca_device_info qca_devices_table
[] = {
2405 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2406 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2407 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2408 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2409 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2410 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2413 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2414 void *data
, u16 size
)
2416 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2417 struct usb_device
*udev
= btdata
->udev
;
2421 buf
= kmalloc(size
, GFP_KERNEL
);
2425 /* Found some of USB hosts have IOT issues with ours so that we should
2426 * not wait until HCI layer is ready.
2428 pipe
= usb_rcvctrlpipe(udev
, 0);
2429 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2430 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2432 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2436 memcpy(data
, buf
, size
);
2444 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2445 const struct firmware
*firmware
,
2448 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2449 struct usb_device
*udev
= btdata
->udev
;
2450 size_t count
, size
, sent
= 0;
2454 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2458 count
= firmware
->size
;
2460 size
= min_t(size_t, count
, hdr_size
);
2461 memcpy(buf
, firmware
->data
, size
);
2463 /* USB patches should go down to controller through USB path
2464 * because binary format fits to go down through USB channel.
2465 * USB control path is for patching headers and USB bulk is for
2468 pipe
= usb_sndctrlpipe(udev
, 0);
2469 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2470 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2472 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2480 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2482 memcpy(buf
, firmware
->data
+ sent
, size
);
2484 pipe
= usb_sndbulkpipe(udev
, 0x02);
2485 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2488 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2489 hdev
->name
, sent
, firmware
->size
, err
);
2494 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2508 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2509 struct qca_version
*ver
,
2510 const struct qca_device_info
*info
)
2512 struct qca_rampatch_version
*rver
;
2513 const struct firmware
*fw
;
2514 u32 ver_rom
, ver_patch
;
2515 u16 rver_rom
, rver_patch
;
2519 ver_rom
= le32_to_cpu(ver
->rom_version
);
2520 ver_patch
= le32_to_cpu(ver
->patch_version
);
2522 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2524 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2526 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2527 hdev
->name
, fwname
, err
);
2531 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2533 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2534 rver_rom
= le16_to_cpu(rver
->rom_version
);
2535 rver_patch
= le16_to_cpu(rver
->patch_version
);
2537 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2538 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2541 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2542 BT_ERR("%s: rampatch file version did not match with firmware",
2548 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2551 release_firmware(fw
);
2556 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2557 struct qca_version
*ver
,
2558 const struct qca_device_info
*info
)
2560 const struct firmware
*fw
;
2564 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2565 le32_to_cpu(ver
->rom_version
));
2567 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2569 BT_ERR("%s: failed to request NVM file: %s (%d)",
2570 hdev
->name
, fwname
, err
);
2574 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2576 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2578 release_firmware(fw
);
2583 static int btusb_setup_qca(struct hci_dev
*hdev
)
2585 const struct qca_device_info
*info
= NULL
;
2586 struct qca_version ver
;
2591 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2596 ver_rom
= le32_to_cpu(ver
.rom_version
);
2597 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2598 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2599 info
= &qca_devices_table
[i
];
2602 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2607 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2612 if (!(status
& QCA_PATCH_UPDATED
)) {
2613 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
2618 if (!(status
& QCA_SYSCFG_UPDATED
)) {
2619 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
2627 #ifdef CONFIG_BT_HCIBTUSB_BCM
2628 static inline int __set_diag_interface(struct hci_dev
*hdev
)
2630 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2631 struct usb_interface
*intf
= data
->diag
;
2637 data
->diag_tx_ep
= NULL
;
2638 data
->diag_rx_ep
= NULL
;
2640 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2641 struct usb_endpoint_descriptor
*ep_desc
;
2643 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2645 if (!data
->diag_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2646 data
->diag_tx_ep
= ep_desc
;
2650 if (!data
->diag_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2651 data
->diag_rx_ep
= ep_desc
;
2656 if (!data
->diag_tx_ep
|| !data
->diag_rx_ep
) {
2657 BT_ERR("%s invalid diagnostic descriptors", hdev
->name
);
2664 static struct urb
*alloc_diag_urb(struct hci_dev
*hdev
, bool enable
)
2666 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2667 struct sk_buff
*skb
;
2671 if (!data
->diag_tx_ep
)
2672 return ERR_PTR(-ENODEV
);
2674 urb
= usb_alloc_urb(0, GFP_KERNEL
);
2676 return ERR_PTR(-ENOMEM
);
2678 skb
= bt_skb_alloc(2, GFP_KERNEL
);
2681 return ERR_PTR(-ENOMEM
);
2684 *skb_put(skb
, 1) = 0xf0;
2685 *skb_put(skb
, 1) = enable
;
2687 pipe
= usb_sndbulkpipe(data
->udev
, data
->diag_tx_ep
->bEndpointAddress
);
2689 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
2690 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
2692 skb
->dev
= (void *)hdev
;
2697 static int btusb_bcm_set_diag(struct hci_dev
*hdev
, bool enable
)
2699 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2705 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
2708 urb
= alloc_diag_urb(hdev
, enable
);
2710 return PTR_ERR(urb
);
2712 return submit_or_queue_tx_urb(hdev
, urb
);
2716 static int btusb_probe(struct usb_interface
*intf
,
2717 const struct usb_device_id
*id
)
2719 struct usb_endpoint_descriptor
*ep_desc
;
2720 struct btusb_data
*data
;
2721 struct hci_dev
*hdev
;
2722 unsigned ifnum_base
;
2725 BT_DBG("intf %p id %p", intf
, id
);
2727 /* interface numbers are hardcoded in the spec */
2728 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0) {
2729 if (!(id
->driver_info
& BTUSB_IFNUM_2
))
2731 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 2)
2735 ifnum_base
= intf
->cur_altsetting
->desc
.bInterfaceNumber
;
2737 if (!id
->driver_info
) {
2738 const struct usb_device_id
*match
;
2740 match
= usb_match_id(intf
, blacklist_table
);
2745 if (id
->driver_info
== BTUSB_IGNORE
)
2748 if (id
->driver_info
& BTUSB_ATH3012
) {
2749 struct usb_device
*udev
= interface_to_usbdev(intf
);
2751 /* Old firmware would otherwise let ath3k driver load
2752 * patch and sysconfig files */
2753 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
2757 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
2761 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2762 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2764 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
2765 data
->intr_ep
= ep_desc
;
2769 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2770 data
->bulk_tx_ep
= ep_desc
;
2774 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2775 data
->bulk_rx_ep
= ep_desc
;
2780 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
2783 if (id
->driver_info
& BTUSB_AMP
) {
2784 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
2785 data
->cmdreq
= 0x2b;
2787 data
->cmdreq_type
= USB_TYPE_CLASS
;
2788 data
->cmdreq
= 0x00;
2791 data
->udev
= interface_to_usbdev(intf
);
2794 INIT_WORK(&data
->work
, btusb_work
);
2795 INIT_WORK(&data
->waker
, btusb_waker
);
2796 init_usb_anchor(&data
->deferred
);
2797 init_usb_anchor(&data
->tx_anchor
);
2798 spin_lock_init(&data
->txlock
);
2800 init_usb_anchor(&data
->intr_anchor
);
2801 init_usb_anchor(&data
->bulk_anchor
);
2802 init_usb_anchor(&data
->isoc_anchor
);
2803 init_usb_anchor(&data
->diag_anchor
);
2804 spin_lock_init(&data
->rxlock
);
2806 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2807 data
->recv_event
= btusb_recv_event_intel
;
2808 data
->recv_bulk
= btusb_recv_bulk_intel
;
2809 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2811 data
->recv_event
= hci_recv_frame
;
2812 data
->recv_bulk
= btusb_recv_bulk
;
2815 hdev
= hci_alloc_dev();
2819 hdev
->bus
= HCI_USB
;
2820 hci_set_drvdata(hdev
, data
);
2822 if (id
->driver_info
& BTUSB_AMP
)
2823 hdev
->dev_type
= HCI_AMP
;
2825 hdev
->dev_type
= HCI_BREDR
;
2829 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
2831 hdev
->open
= btusb_open
;
2832 hdev
->close
= btusb_close
;
2833 hdev
->flush
= btusb_flush
;
2834 hdev
->send
= btusb_send_frame
;
2835 hdev
->notify
= btusb_notify
;
2837 if (id
->driver_info
& BTUSB_BCM2045
)
2838 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
2840 if (id
->driver_info
& BTUSB_BCM92035
)
2841 hdev
->setup
= btusb_setup_bcm92035
;
2843 #ifdef CONFIG_BT_HCIBTUSB_BCM
2844 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
2845 hdev
->manufacturer
= 15;
2846 hdev
->setup
= btbcm_setup_patchram
;
2847 hdev
->set_diag
= btusb_bcm_set_diag
;
2848 hdev
->set_bdaddr
= btbcm_set_bdaddr
;
2850 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2851 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2854 if (id
->driver_info
& BTUSB_BCM_APPLE
) {
2855 hdev
->manufacturer
= 15;
2856 hdev
->setup
= btbcm_setup_apple
;
2857 hdev
->set_diag
= btusb_bcm_set_diag
;
2859 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2860 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2864 if (id
->driver_info
& BTUSB_INTEL
) {
2865 hdev
->manufacturer
= 2;
2866 hdev
->setup
= btusb_setup_intel
;
2867 hdev
->shutdown
= btusb_shutdown_intel
;
2868 hdev
->set_diag
= btintel_set_diag_mfg
;
2869 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2870 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2871 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2872 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2875 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2876 hdev
->manufacturer
= 2;
2877 hdev
->send
= btusb_send_frame_intel
;
2878 hdev
->setup
= btusb_setup_intel_new
;
2879 hdev
->hw_error
= btintel_hw_error
;
2880 hdev
->set_diag
= btintel_set_diag
;
2881 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2882 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2883 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2886 if (id
->driver_info
& BTUSB_MARVELL
)
2887 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
2889 if (id
->driver_info
& BTUSB_SWAVE
) {
2890 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
2891 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
2894 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2895 hdev
->manufacturer
= 2;
2896 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2899 if (id
->driver_info
& BTUSB_ATH3012
) {
2900 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2901 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2902 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2905 if (id
->driver_info
& BTUSB_QCA_ROME
) {
2906 data
->setup_on_usb
= btusb_setup_qca
;
2907 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2910 #ifdef CONFIG_BT_HCIBTUSB_RTL
2911 if (id
->driver_info
& BTUSB_REALTEK
) {
2912 hdev
->setup
= btrtl_setup_realtek
;
2914 /* Realtek devices lose their updated firmware over suspend,
2915 * but the USB hub doesn't notice any status change.
2916 * Explicitly request a device reset on resume.
2918 set_bit(BTUSB_RESET_RESUME
, &data
->flags
);
2922 if (id
->driver_info
& BTUSB_AMP
) {
2923 /* AMP controllers do not support SCO packets */
2926 /* Interface orders are hardcoded in the specification */
2927 data
->isoc
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 1);
2931 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2933 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
2934 if (!disable_scofix
)
2935 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
2938 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
2941 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
2942 data
->cmdreq_type
= USB_TYPE_VENDOR
;
2943 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2946 if (id
->driver_info
& BTUSB_CSR
) {
2947 struct usb_device
*udev
= data
->udev
;
2948 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
2950 /* Old firmware would otherwise execute USB reset */
2951 if (bcdDevice
< 0x117)
2952 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2954 /* Fake CSR devices with broken commands */
2955 if (bcdDevice
<= 0x100 || bcdDevice
== 0x134)
2956 hdev
->setup
= btusb_setup_csr
;
2958 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2961 if (id
->driver_info
& BTUSB_SNIFFER
) {
2962 struct usb_device
*udev
= data
->udev
;
2964 /* New sniffer firmware has crippled HCI interface */
2965 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
2966 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2969 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2970 /* A bug in the bootloader causes that interrupt interface is
2971 * only enabled after receiving SetInterface(0, AltSetting=0).
2973 err
= usb_set_interface(data
->udev
, 0, 0);
2975 BT_ERR("failed to set interface 0, alt 0 %d", err
);
2982 err
= usb_driver_claim_interface(&btusb_driver
,
2990 #ifdef CONFIG_BT_HCIBTUSB_BCM
2992 if (!usb_driver_claim_interface(&btusb_driver
,
2994 __set_diag_interface(hdev
);
3000 err
= hci_register_dev(hdev
);
3006 usb_set_intfdata(intf
, data
);
3011 static void btusb_disconnect(struct usb_interface
*intf
)
3013 struct btusb_data
*data
= usb_get_intfdata(intf
);
3014 struct hci_dev
*hdev
;
3016 BT_DBG("intf %p", intf
);
3022 usb_set_intfdata(data
->intf
, NULL
);
3025 usb_set_intfdata(data
->isoc
, NULL
);
3028 usb_set_intfdata(data
->diag
, NULL
);
3030 hci_unregister_dev(hdev
);
3032 if (intf
== data
->intf
) {
3034 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3036 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3037 } else if (intf
== data
->isoc
) {
3039 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3040 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3041 } else if (intf
== data
->diag
) {
3042 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3044 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3051 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3053 struct btusb_data
*data
= usb_get_intfdata(intf
);
3055 BT_DBG("intf %p", intf
);
3057 if (data
->suspend_count
++)
3060 spin_lock_irq(&data
->txlock
);
3061 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3062 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3063 spin_unlock_irq(&data
->txlock
);
3065 spin_unlock_irq(&data
->txlock
);
3066 data
->suspend_count
--;
3070 cancel_work_sync(&data
->work
);
3072 btusb_stop_traffic(data
);
3073 usb_kill_anchored_urbs(&data
->tx_anchor
);
3075 /* Optionally request a device reset on resume, but only when
3076 * wakeups are disabled. If wakeups are enabled we assume the
3077 * device will stay powered up throughout suspend.
3079 if (test_bit(BTUSB_RESET_RESUME
, &data
->flags
) &&
3080 !device_may_wakeup(&data
->udev
->dev
))
3081 data
->udev
->reset_resume
= 1;
3086 static void play_deferred(struct btusb_data
*data
)
3091 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3092 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3096 data
->tx_in_flight
++;
3098 usb_scuttle_anchored_urbs(&data
->deferred
);
3101 static int btusb_resume(struct usb_interface
*intf
)
3103 struct btusb_data
*data
= usb_get_intfdata(intf
);
3104 struct hci_dev
*hdev
= data
->hdev
;
3107 BT_DBG("intf %p", intf
);
3109 if (--data
->suspend_count
)
3112 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3115 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3116 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3118 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3123 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3124 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3126 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3130 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3133 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3134 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3135 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3137 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3140 spin_lock_irq(&data
->txlock
);
3141 play_deferred(data
);
3142 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3143 spin_unlock_irq(&data
->txlock
);
3144 schedule_work(&data
->work
);
3149 usb_scuttle_anchored_urbs(&data
->deferred
);
3151 spin_lock_irq(&data
->txlock
);
3152 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3153 spin_unlock_irq(&data
->txlock
);
3159 static struct usb_driver btusb_driver
= {
3161 .probe
= btusb_probe
,
3162 .disconnect
= btusb_disconnect
,
3164 .suspend
= btusb_suspend
,
3165 .resume
= btusb_resume
,
3167 .id_table
= btusb_table
,
3168 .supports_autosuspend
= 1,
3169 .disable_hub_initiated_lpm
= 1,
3172 module_usb_driver(btusb_driver
);
3174 module_param(disable_scofix
, bool, 0644);
3175 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3177 module_param(force_scofix
, bool, 0644);
3178 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3180 module_param(reset
, bool, 0644);
3181 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3183 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3184 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3185 MODULE_VERSION(VERSION
);
3186 MODULE_LICENSE("GPL");