3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
37 static bool disable_scofix
;
38 static bool force_scofix
;
40 static bool reset
= 1;
42 static struct usb_driver btusb_driver
;
44 #define BTUSB_IGNORE 0x01
45 #define BTUSB_DIGIANSWER 0x02
46 #define BTUSB_CSR 0x04
47 #define BTUSB_SNIFFER 0x08
48 #define BTUSB_BCM92035 0x10
49 #define BTUSB_BROKEN_ISOC 0x20
50 #define BTUSB_WRONG_SCO_MTU 0x40
51 #define BTUSB_ATH3012 0x80
52 #define BTUSB_INTEL 0x100
53 #define BTUSB_INTEL_BOOT 0x200
54 #define BTUSB_BCM_PATCHRAM 0x400
55 #define BTUSB_MARVELL 0x800
56 #define BTUSB_SWAVE 0x1000
57 #define BTUSB_INTEL_NEW 0x2000
58 #define BTUSB_AMP 0x4000
59 #define BTUSB_QCA_ROME 0x8000
60 #define BTUSB_BCM_APPLE 0x10000
61 #define BTUSB_REALTEK 0x20000
63 static const struct usb_device_id btusb_table
[] = {
64 /* Generic Bluetooth USB device */
65 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
67 /* Generic Bluetooth AMP device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
70 /* Apple-specific (Broadcom) devices */
71 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
72 .driver_info
= BTUSB_BCM_APPLE
},
74 /* MediaTek MT76x0E */
75 { USB_DEVICE(0x0e8d, 0x763f) },
77 /* Broadcom SoftSailing reporting vendor specific */
78 { USB_DEVICE(0x0a5c, 0x21e1) },
80 /* Apple MacBookPro 7,1 */
81 { USB_DEVICE(0x05ac, 0x8213) },
84 { USB_DEVICE(0x05ac, 0x8215) },
86 /* Apple MacBookPro6,2 */
87 { USB_DEVICE(0x05ac, 0x8218) },
89 /* Apple MacBookAir3,1, MacBookAir3,2 */
90 { USB_DEVICE(0x05ac, 0x821b) },
92 /* Apple MacBookAir4,1 */
93 { USB_DEVICE(0x05ac, 0x821f) },
95 /* Apple MacBookPro8,2 */
96 { USB_DEVICE(0x05ac, 0x821a) },
98 /* Apple MacMini5,1 */
99 { USB_DEVICE(0x05ac, 0x8281) },
101 /* AVM BlueFRITZ! USB v2.0 */
102 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
104 /* Bluetooth Ultraport Module from IBM */
105 { USB_DEVICE(0x04bf, 0x030a) },
107 /* ALPS Modules with non-standard id */
108 { USB_DEVICE(0x044e, 0x3001) },
109 { USB_DEVICE(0x044e, 0x3002) },
111 /* Ericsson with non-standard id */
112 { USB_DEVICE(0x0bdb, 0x1002) },
114 /* Canyon CN-BTU1 with HID interfaces */
115 { USB_DEVICE(0x0c10, 0x0000) },
117 /* Broadcom BCM20702A0 */
118 { USB_DEVICE(0x413c, 0x8197) },
120 /* Broadcom BCM20702B0 (Dynex/Insignia) */
121 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
123 /* Foxconn - Hon Hai */
124 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
125 .driver_info
= BTUSB_BCM_PATCHRAM
},
127 /* Lite-On Technology - Broadcom based */
128 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
129 .driver_info
= BTUSB_BCM_PATCHRAM
},
131 /* Broadcom devices with vendor specific id */
132 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
133 .driver_info
= BTUSB_BCM_PATCHRAM
},
135 /* ASUSTek Computer - Broadcom based */
136 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
137 .driver_info
= BTUSB_BCM_PATCHRAM
},
139 /* Belkin F8065bf - Broadcom based */
140 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
141 .driver_info
= BTUSB_BCM_PATCHRAM
},
143 /* IMC Networks - Broadcom based */
144 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
145 .driver_info
= BTUSB_BCM_PATCHRAM
},
147 /* Intel Bluetooth USB Bootloader (RAM module) */
148 { USB_DEVICE(0x8087, 0x0a5a),
149 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
151 { } /* Terminating entry */
154 MODULE_DEVICE_TABLE(usb
, btusb_table
);
156 static const struct usb_device_id blacklist_table
[] = {
157 /* CSR BlueCore devices */
158 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
160 /* Broadcom BCM2033 without firmware */
161 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
163 /* Atheros 3011 with sflash firmware */
164 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
165 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
166 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
167 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
168 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
169 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
170 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
172 /* Atheros AR9285 Malbec with sflash firmware */
173 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
175 /* Atheros 3012 with sflash firmware */
176 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
177 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
178 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
179 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
180 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
181 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
182 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
183 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
184 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
185 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
186 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
187 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
188 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
189 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
190 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
191 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
192 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
193 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x0cf3, 0xe006), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
209 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
210 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
211 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
212 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
214 /* Atheros AR5BBU12 with sflash firmware */
215 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
217 /* Atheros AR5BBU12 with sflash firmware */
218 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
219 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
221 /* QCA ROME chipset */
222 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
223 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
225 /* Broadcom BCM2035 */
226 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
227 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
228 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
230 /* Broadcom BCM2045 */
231 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
232 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
234 /* IBM/Lenovo ThinkPad with Broadcom chip */
235 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
236 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
238 /* HP laptop with Broadcom chip */
239 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
241 /* Dell laptop with Broadcom chip */
242 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
244 /* Dell Wireless 370 and 410 devices */
245 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
246 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
248 /* Belkin F8T012 and F8T013 devices */
249 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
250 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
252 /* Asus WL-BTD202 device */
253 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
255 /* Kensington Bluetooth USB adapter */
256 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
258 /* RTX Telecom based adapters with buggy SCO support */
259 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
260 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
262 /* CONWISE Technology based adapters with buggy SCO support */
263 { USB_DEVICE(0x0e5e, 0x6622), .driver_info
= BTUSB_BROKEN_ISOC
},
265 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
266 { USB_DEVICE(0x1300, 0x0001), .driver_info
= BTUSB_SWAVE
},
268 /* Digianswer devices */
269 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
270 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
272 /* CSR BlueCore Bluetooth Sniffer */
273 { USB_DEVICE(0x0a12, 0x0002),
274 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
276 /* Frontline ComProbe Bluetooth Sniffer */
277 { USB_DEVICE(0x16d3, 0x0002),
278 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
280 /* Marvell Bluetooth devices */
281 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
282 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
284 /* Intel Bluetooth devices */
285 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
286 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
287 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
288 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
290 /* Other Intel Bluetooth devices */
291 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
292 .driver_info
= BTUSB_IGNORE
},
294 /* Realtek Bluetooth devices */
295 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
296 .driver_info
= BTUSB_REALTEK
},
298 /* Additional Realtek 8723AE Bluetooth devices */
299 { USB_DEVICE(0x0930, 0x021d), .driver_info
= BTUSB_REALTEK
},
300 { USB_DEVICE(0x13d3, 0x3394), .driver_info
= BTUSB_REALTEK
},
302 /* Additional Realtek 8723BE Bluetooth devices */
303 { USB_DEVICE(0x0489, 0xe085), .driver_info
= BTUSB_REALTEK
},
304 { USB_DEVICE(0x0489, 0xe08b), .driver_info
= BTUSB_REALTEK
},
305 { USB_DEVICE(0x13d3, 0x3410), .driver_info
= BTUSB_REALTEK
},
306 { USB_DEVICE(0x13d3, 0x3416), .driver_info
= BTUSB_REALTEK
},
307 { USB_DEVICE(0x13d3, 0x3459), .driver_info
= BTUSB_REALTEK
},
309 /* Additional Realtek 8821AE Bluetooth devices */
310 { USB_DEVICE(0x0b05, 0x17dc), .driver_info
= BTUSB_REALTEK
},
311 { USB_DEVICE(0x13d3, 0x3414), .driver_info
= BTUSB_REALTEK
},
312 { USB_DEVICE(0x13d3, 0x3458), .driver_info
= BTUSB_REALTEK
},
313 { USB_DEVICE(0x13d3, 0x3461), .driver_info
= BTUSB_REALTEK
},
314 { USB_DEVICE(0x13d3, 0x3462), .driver_info
= BTUSB_REALTEK
},
316 { } /* Terminating entry */
319 #define BTUSB_MAX_ISOC_FRAMES 10
321 #define BTUSB_INTR_RUNNING 0
322 #define BTUSB_BULK_RUNNING 1
323 #define BTUSB_ISOC_RUNNING 2
324 #define BTUSB_SUSPENDING 3
325 #define BTUSB_DID_ISO_RESUME 4
326 #define BTUSB_BOOTLOADER 5
327 #define BTUSB_DOWNLOADING 6
328 #define BTUSB_FIRMWARE_LOADED 7
329 #define BTUSB_FIRMWARE_FAILED 8
330 #define BTUSB_BOOTING 9
333 struct hci_dev
*hdev
;
334 struct usb_device
*udev
;
335 struct usb_interface
*intf
;
336 struct usb_interface
*isoc
;
340 struct work_struct work
;
341 struct work_struct waker
;
343 struct usb_anchor deferred
;
344 struct usb_anchor tx_anchor
;
348 struct usb_anchor intr_anchor
;
349 struct usb_anchor bulk_anchor
;
350 struct usb_anchor isoc_anchor
;
353 struct sk_buff
*evt_skb
;
354 struct sk_buff
*acl_skb
;
355 struct sk_buff
*sco_skb
;
357 struct usb_endpoint_descriptor
*intr_ep
;
358 struct usb_endpoint_descriptor
*bulk_tx_ep
;
359 struct usb_endpoint_descriptor
*bulk_rx_ep
;
360 struct usb_endpoint_descriptor
*isoc_tx_ep
;
361 struct usb_endpoint_descriptor
*isoc_rx_ep
;
366 unsigned int sco_num
;
370 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
371 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
373 int (*setup_on_usb
)(struct hci_dev
*hdev
);
376 static inline void btusb_free_frags(struct btusb_data
*data
)
380 spin_lock_irqsave(&data
->rxlock
, flags
);
382 kfree_skb(data
->evt_skb
);
383 data
->evt_skb
= NULL
;
385 kfree_skb(data
->acl_skb
);
386 data
->acl_skb
= NULL
;
388 kfree_skb(data
->sco_skb
);
389 data
->sco_skb
= NULL
;
391 spin_unlock_irqrestore(&data
->rxlock
, flags
);
394 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
399 spin_lock(&data
->rxlock
);
406 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
412 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
413 bt_cb(skb
)->expect
= HCI_EVENT_HDR_SIZE
;
416 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
417 memcpy(skb_put(skb
, len
), buffer
, len
);
421 bt_cb(skb
)->expect
-= len
;
423 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
424 /* Complete event header */
425 bt_cb(skb
)->expect
= hci_event_hdr(skb
)->plen
;
427 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
436 if (bt_cb(skb
)->expect
== 0) {
438 data
->recv_event(data
->hdev
, skb
);
444 spin_unlock(&data
->rxlock
);
449 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
454 spin_lock(&data
->rxlock
);
461 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
467 bt_cb(skb
)->pkt_type
= HCI_ACLDATA_PKT
;
468 bt_cb(skb
)->expect
= HCI_ACL_HDR_SIZE
;
471 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
472 memcpy(skb_put(skb
, len
), buffer
, len
);
476 bt_cb(skb
)->expect
-= len
;
478 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
479 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
481 /* Complete ACL header */
482 bt_cb(skb
)->expect
= __le16_to_cpu(dlen
);
484 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
493 if (bt_cb(skb
)->expect
== 0) {
495 hci_recv_frame(data
->hdev
, skb
);
501 spin_unlock(&data
->rxlock
);
506 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
511 spin_lock(&data
->rxlock
);
518 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
524 bt_cb(skb
)->pkt_type
= HCI_SCODATA_PKT
;
525 bt_cb(skb
)->expect
= HCI_SCO_HDR_SIZE
;
528 len
= min_t(uint
, bt_cb(skb
)->expect
, count
);
529 memcpy(skb_put(skb
, len
), buffer
, len
);
533 bt_cb(skb
)->expect
-= len
;
535 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
536 /* Complete SCO header */
537 bt_cb(skb
)->expect
= hci_sco_hdr(skb
)->dlen
;
539 if (skb_tailroom(skb
) < bt_cb(skb
)->expect
) {
548 if (bt_cb(skb
)->expect
== 0) {
550 hci_recv_frame(data
->hdev
, skb
);
556 spin_unlock(&data
->rxlock
);
561 static void btusb_intr_complete(struct urb
*urb
)
563 struct hci_dev
*hdev
= urb
->context
;
564 struct btusb_data
*data
= hci_get_drvdata(hdev
);
567 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
570 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
573 if (urb
->status
== 0) {
574 hdev
->stat
.byte_rx
+= urb
->actual_length
;
576 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
577 urb
->actual_length
) < 0) {
578 BT_ERR("%s corrupted event packet", hdev
->name
);
581 } else if (urb
->status
== -ENOENT
) {
582 /* Avoid suspend failed when usb_kill_urb */
586 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
589 usb_mark_last_busy(data
->udev
);
590 usb_anchor_urb(urb
, &data
->intr_anchor
);
592 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
594 /* -EPERM: urb is being killed;
595 * -ENODEV: device got disconnected */
596 if (err
!= -EPERM
&& err
!= -ENODEV
)
597 BT_ERR("%s urb %p failed to resubmit (%d)",
598 hdev
->name
, urb
, -err
);
599 usb_unanchor_urb(urb
);
603 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
605 struct btusb_data
*data
= hci_get_drvdata(hdev
);
611 BT_DBG("%s", hdev
->name
);
616 urb
= usb_alloc_urb(0, mem_flags
);
620 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
622 buf
= kmalloc(size
, mem_flags
);
628 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
630 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
631 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
633 urb
->transfer_flags
|= URB_FREE_BUFFER
;
635 usb_anchor_urb(urb
, &data
->intr_anchor
);
637 err
= usb_submit_urb(urb
, mem_flags
);
639 if (err
!= -EPERM
&& err
!= -ENODEV
)
640 BT_ERR("%s urb %p submission failed (%d)",
641 hdev
->name
, urb
, -err
);
642 usb_unanchor_urb(urb
);
650 static void btusb_bulk_complete(struct urb
*urb
)
652 struct hci_dev
*hdev
= urb
->context
;
653 struct btusb_data
*data
= hci_get_drvdata(hdev
);
656 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
659 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
662 if (urb
->status
== 0) {
663 hdev
->stat
.byte_rx
+= urb
->actual_length
;
665 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
666 urb
->actual_length
) < 0) {
667 BT_ERR("%s corrupted ACL packet", hdev
->name
);
670 } else if (urb
->status
== -ENOENT
) {
671 /* Avoid suspend failed when usb_kill_urb */
675 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
678 usb_anchor_urb(urb
, &data
->bulk_anchor
);
679 usb_mark_last_busy(data
->udev
);
681 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
683 /* -EPERM: urb is being killed;
684 * -ENODEV: device got disconnected */
685 if (err
!= -EPERM
&& err
!= -ENODEV
)
686 BT_ERR("%s urb %p failed to resubmit (%d)",
687 hdev
->name
, urb
, -err
);
688 usb_unanchor_urb(urb
);
692 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
694 struct btusb_data
*data
= hci_get_drvdata(hdev
);
698 int err
, size
= HCI_MAX_FRAME_SIZE
;
700 BT_DBG("%s", hdev
->name
);
702 if (!data
->bulk_rx_ep
)
705 urb
= usb_alloc_urb(0, mem_flags
);
709 buf
= kmalloc(size
, mem_flags
);
715 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
717 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
718 btusb_bulk_complete
, hdev
);
720 urb
->transfer_flags
|= URB_FREE_BUFFER
;
722 usb_mark_last_busy(data
->udev
);
723 usb_anchor_urb(urb
, &data
->bulk_anchor
);
725 err
= usb_submit_urb(urb
, mem_flags
);
727 if (err
!= -EPERM
&& err
!= -ENODEV
)
728 BT_ERR("%s urb %p submission failed (%d)",
729 hdev
->name
, urb
, -err
);
730 usb_unanchor_urb(urb
);
738 static void btusb_isoc_complete(struct urb
*urb
)
740 struct hci_dev
*hdev
= urb
->context
;
741 struct btusb_data
*data
= hci_get_drvdata(hdev
);
744 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
747 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
750 if (urb
->status
== 0) {
751 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
752 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
753 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
755 if (urb
->iso_frame_desc
[i
].status
)
758 hdev
->stat
.byte_rx
+= length
;
760 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
762 BT_ERR("%s corrupted SCO packet", hdev
->name
);
766 } else if (urb
->status
== -ENOENT
) {
767 /* Avoid suspend failed when usb_kill_urb */
771 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
774 usb_anchor_urb(urb
, &data
->isoc_anchor
);
776 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
778 /* -EPERM: urb is being killed;
779 * -ENODEV: device got disconnected */
780 if (err
!= -EPERM
&& err
!= -ENODEV
)
781 BT_ERR("%s urb %p failed to resubmit (%d)",
782 hdev
->name
, urb
, -err
);
783 usb_unanchor_urb(urb
);
787 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
791 BT_DBG("len %d mtu %d", len
, mtu
);
793 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
794 i
++, offset
+= mtu
, len
-= mtu
) {
795 urb
->iso_frame_desc
[i
].offset
= offset
;
796 urb
->iso_frame_desc
[i
].length
= mtu
;
799 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
800 urb
->iso_frame_desc
[i
].offset
= offset
;
801 urb
->iso_frame_desc
[i
].length
= len
;
805 urb
->number_of_packets
= i
;
808 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
810 struct btusb_data
*data
= hci_get_drvdata(hdev
);
816 BT_DBG("%s", hdev
->name
);
818 if (!data
->isoc_rx_ep
)
821 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
825 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
826 BTUSB_MAX_ISOC_FRAMES
;
828 buf
= kmalloc(size
, mem_flags
);
834 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
836 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
837 hdev
, data
->isoc_rx_ep
->bInterval
);
839 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
841 __fill_isoc_descriptor(urb
, size
,
842 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
844 usb_anchor_urb(urb
, &data
->isoc_anchor
);
846 err
= usb_submit_urb(urb
, mem_flags
);
848 if (err
!= -EPERM
&& err
!= -ENODEV
)
849 BT_ERR("%s urb %p submission failed (%d)",
850 hdev
->name
, urb
, -err
);
851 usb_unanchor_urb(urb
);
859 static void btusb_tx_complete(struct urb
*urb
)
861 struct sk_buff
*skb
= urb
->context
;
862 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
863 struct btusb_data
*data
= hci_get_drvdata(hdev
);
865 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
868 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
872 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
877 spin_lock(&data
->txlock
);
878 data
->tx_in_flight
--;
879 spin_unlock(&data
->txlock
);
881 kfree(urb
->setup_packet
);
886 static void btusb_isoc_tx_complete(struct urb
*urb
)
888 struct sk_buff
*skb
= urb
->context
;
889 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
891 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
894 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
898 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
903 kfree(urb
->setup_packet
);
908 static int btusb_open(struct hci_dev
*hdev
)
910 struct btusb_data
*data
= hci_get_drvdata(hdev
);
913 BT_DBG("%s", hdev
->name
);
915 /* Patching USB firmware files prior to starting any URBs of HCI path
916 * It is more safe to use USB bulk channel for downloading USB patch
918 if (data
->setup_on_usb
) {
919 err
= data
->setup_on_usb(hdev
);
924 err
= usb_autopm_get_interface(data
->intf
);
928 data
->intf
->needs_remote_wakeup
= 1;
930 if (test_and_set_bit(HCI_RUNNING
, &hdev
->flags
))
933 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
936 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
940 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
942 usb_kill_anchored_urbs(&data
->intr_anchor
);
946 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
947 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
950 usb_autopm_put_interface(data
->intf
);
954 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
955 clear_bit(HCI_RUNNING
, &hdev
->flags
);
956 usb_autopm_put_interface(data
->intf
);
960 static void btusb_stop_traffic(struct btusb_data
*data
)
962 usb_kill_anchored_urbs(&data
->intr_anchor
);
963 usb_kill_anchored_urbs(&data
->bulk_anchor
);
964 usb_kill_anchored_urbs(&data
->isoc_anchor
);
967 static int btusb_close(struct hci_dev
*hdev
)
969 struct btusb_data
*data
= hci_get_drvdata(hdev
);
972 BT_DBG("%s", hdev
->name
);
974 if (!test_and_clear_bit(HCI_RUNNING
, &hdev
->flags
))
977 cancel_work_sync(&data
->work
);
978 cancel_work_sync(&data
->waker
);
980 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
981 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
982 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
984 btusb_stop_traffic(data
);
985 btusb_free_frags(data
);
987 err
= usb_autopm_get_interface(data
->intf
);
991 data
->intf
->needs_remote_wakeup
= 0;
992 usb_autopm_put_interface(data
->intf
);
995 usb_scuttle_anchored_urbs(&data
->deferred
);
999 static int btusb_flush(struct hci_dev
*hdev
)
1001 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1003 BT_DBG("%s", hdev
->name
);
1005 usb_kill_anchored_urbs(&data
->tx_anchor
);
1006 btusb_free_frags(data
);
1011 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1013 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1014 struct usb_ctrlrequest
*dr
;
1018 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1020 return ERR_PTR(-ENOMEM
);
1022 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
1025 return ERR_PTR(-ENOMEM
);
1028 dr
->bRequestType
= data
->cmdreq_type
;
1029 dr
->bRequest
= data
->cmdreq
;
1032 dr
->wLength
= __cpu_to_le16(skb
->len
);
1034 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1036 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1037 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1039 skb
->dev
= (void *)hdev
;
1044 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1046 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1050 if (!data
->bulk_tx_ep
)
1051 return ERR_PTR(-ENODEV
);
1053 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1055 return ERR_PTR(-ENOMEM
);
1057 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1059 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1060 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1062 skb
->dev
= (void *)hdev
;
1067 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1069 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1073 if (!data
->isoc_tx_ep
)
1074 return ERR_PTR(-ENODEV
);
1076 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1078 return ERR_PTR(-ENOMEM
);
1080 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1082 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1083 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1084 skb
, data
->isoc_tx_ep
->bInterval
);
1086 urb
->transfer_flags
= URB_ISO_ASAP
;
1088 __fill_isoc_descriptor(urb
, skb
->len
,
1089 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1091 skb
->dev
= (void *)hdev
;
1096 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1098 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1101 usb_anchor_urb(urb
, &data
->tx_anchor
);
1103 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1105 if (err
!= -EPERM
&& err
!= -ENODEV
)
1106 BT_ERR("%s urb %p submission failed (%d)",
1107 hdev
->name
, urb
, -err
);
1108 kfree(urb
->setup_packet
);
1109 usb_unanchor_urb(urb
);
1111 usb_mark_last_busy(data
->udev
);
1118 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1120 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1121 unsigned long flags
;
1124 spin_lock_irqsave(&data
->txlock
, flags
);
1125 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1127 data
->tx_in_flight
++;
1128 spin_unlock_irqrestore(&data
->txlock
, flags
);
1131 return submit_tx_urb(hdev
, urb
);
1133 usb_anchor_urb(urb
, &data
->deferred
);
1134 schedule_work(&data
->waker
);
1140 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1144 BT_DBG("%s", hdev
->name
);
1146 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1149 switch (bt_cb(skb
)->pkt_type
) {
1150 case HCI_COMMAND_PKT
:
1151 urb
= alloc_ctrl_urb(hdev
, skb
);
1153 return PTR_ERR(urb
);
1155 hdev
->stat
.cmd_tx
++;
1156 return submit_or_queue_tx_urb(hdev
, urb
);
1158 case HCI_ACLDATA_PKT
:
1159 urb
= alloc_bulk_urb(hdev
, skb
);
1161 return PTR_ERR(urb
);
1163 hdev
->stat
.acl_tx
++;
1164 return submit_or_queue_tx_urb(hdev
, urb
);
1166 case HCI_SCODATA_PKT
:
1167 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1170 urb
= alloc_isoc_urb(hdev
, skb
);
1172 return PTR_ERR(urb
);
1174 hdev
->stat
.sco_tx
++;
1175 return submit_tx_urb(hdev
, urb
);
1181 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1183 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1185 BT_DBG("%s evt %d", hdev
->name
, evt
);
1187 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1188 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1189 schedule_work(&data
->work
);
1193 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1195 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1196 struct usb_interface
*intf
= data
->isoc
;
1197 struct usb_endpoint_descriptor
*ep_desc
;
1203 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1205 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1209 data
->isoc_altsetting
= altsetting
;
1211 data
->isoc_tx_ep
= NULL
;
1212 data
->isoc_rx_ep
= NULL
;
1214 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1215 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1217 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1218 data
->isoc_tx_ep
= ep_desc
;
1222 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1223 data
->isoc_rx_ep
= ep_desc
;
1228 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1229 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1236 static void btusb_work(struct work_struct
*work
)
1238 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1239 struct hci_dev
*hdev
= data
->hdev
;
1243 if (data
->sco_num
> 0) {
1244 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1245 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1247 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1248 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1252 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1255 if (hdev
->voice_setting
& 0x0020) {
1256 static const int alts
[3] = { 2, 4, 5 };
1258 new_alts
= alts
[data
->sco_num
- 1];
1260 new_alts
= data
->sco_num
;
1263 if (data
->isoc_altsetting
!= new_alts
) {
1264 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1265 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1267 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1271 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1272 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1273 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1275 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1278 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1279 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1281 __set_isoc_interface(hdev
, 0);
1282 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1283 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1287 static void btusb_waker(struct work_struct
*work
)
1289 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1292 err
= usb_autopm_get_interface(data
->intf
);
1296 usb_autopm_put_interface(data
->intf
);
1299 static struct sk_buff
*btusb_read_local_version(struct hci_dev
*hdev
)
1301 struct sk_buff
*skb
;
1303 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1306 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
1307 hdev
->name
, PTR_ERR(skb
));
1311 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1312 BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
1315 return ERR_PTR(-EIO
);
1321 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1323 struct sk_buff
*skb
;
1326 BT_DBG("%s", hdev
->name
);
1328 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1330 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1337 static int btusb_setup_csr(struct hci_dev
*hdev
)
1339 struct hci_rp_read_local_version
*rp
;
1340 struct sk_buff
*skb
;
1343 BT_DBG("%s", hdev
->name
);
1345 skb
= btusb_read_local_version(hdev
);
1347 return -PTR_ERR(skb
);
1349 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1352 if (le16_to_cpu(rp
->manufacturer
) != 10) {
1353 /* Clear the reset quirk since this is not an actual
1354 * early Bluetooth 1.1 device from CSR.
1356 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1358 /* These fake CSR controllers have all a broken
1359 * stored link key handling and so just disable it.
1361 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
,
1366 ret
= -bt_to_errno(rp
->status
);
1373 #define RTL_FRAG_LEN 252
1375 struct rtl_download_cmd
{
1377 __u8 data
[RTL_FRAG_LEN
];
1380 struct rtl_download_response
{
1385 struct rtl_rom_version_evt
{
1390 struct rtl_epatch_header
{
1396 #define RTL_EPATCH_SIGNATURE "Realtech"
1397 #define RTL_ROM_LMP_3499 0x3499
1398 #define RTL_ROM_LMP_8723A 0x1200
1399 #define RTL_ROM_LMP_8723B 0x8723
1400 #define RTL_ROM_LMP_8821A 0x8821
1401 #define RTL_ROM_LMP_8761A 0x8761
1403 static int rtl_read_rom_version(struct hci_dev
*hdev
, u8
*version
)
1405 struct rtl_rom_version_evt
*rom_version
;
1406 struct sk_buff
*skb
;
1409 /* Read RTL ROM version command */
1410 skb
= __hci_cmd_sync(hdev
, 0xfc6d, 0, NULL
, HCI_INIT_TIMEOUT
);
1412 BT_ERR("%s: Read ROM version failed (%ld)",
1413 hdev
->name
, PTR_ERR(skb
));
1414 return PTR_ERR(skb
);
1417 if (skb
->len
!= sizeof(*rom_version
)) {
1418 BT_ERR("%s: RTL version event length mismatch", hdev
->name
);
1423 rom_version
= (struct rtl_rom_version_evt
*)skb
->data
;
1424 BT_INFO("%s: rom_version status=%x version=%x",
1425 hdev
->name
, rom_version
->status
, rom_version
->version
);
1427 ret
= rom_version
->status
;
1429 *version
= rom_version
->version
;
1435 static int rtl8723b_parse_firmware(struct hci_dev
*hdev
, u16 lmp_subver
,
1436 const struct firmware
*fw
,
1437 unsigned char **_buf
)
1439 const u8 extension_sig
[] = { 0x51, 0x04, 0xfd, 0x77 };
1440 struct rtl_epatch_header
*epatch_info
;
1444 u8 opcode
, length
, data
, rom_version
= 0;
1445 int project_id
= -1;
1446 const unsigned char *fwptr
, *chip_id_base
;
1447 const unsigned char *patch_length_base
, *patch_offset_base
;
1448 u32 patch_offset
= 0;
1449 u16 patch_length
, num_patches
;
1450 const u16 project_id_to_lmp_subver
[] = {
1457 ret
= rtl_read_rom_version(hdev
, &rom_version
);
1459 return -bt_to_errno(ret
);
1461 min_size
= sizeof(struct rtl_epatch_header
) + sizeof(extension_sig
) + 3;
1462 if (fw
->size
< min_size
)
1465 fwptr
= fw
->data
+ fw
->size
- sizeof(extension_sig
);
1466 if (memcmp(fwptr
, extension_sig
, sizeof(extension_sig
)) != 0) {
1467 BT_ERR("%s: extension section signature mismatch", hdev
->name
);
1471 /* Loop from the end of the firmware parsing instructions, until
1472 * we find an instruction that identifies the "project ID" for the
1473 * hardware supported by this firwmare file.
1474 * Once we have that, we double-check that that project_id is suitable
1475 * for the hardware we are working with.
1477 while (fwptr
>= fw
->data
+ (sizeof(struct rtl_epatch_header
) + 3)) {
1482 BT_DBG("check op=%x len=%x data=%x", opcode
, length
, data
);
1484 if (opcode
== 0xff) /* EOF */
1488 BT_ERR("%s: found instruction with length 0",
1493 if (opcode
== 0 && length
== 1) {
1501 if (project_id
< 0) {
1502 BT_ERR("%s: failed to find version instruction", hdev
->name
);
1506 if (project_id
>= ARRAY_SIZE(project_id_to_lmp_subver
)) {
1507 BT_ERR("%s: unknown project id %d", hdev
->name
, project_id
);
1511 if (lmp_subver
!= project_id_to_lmp_subver
[project_id
]) {
1512 BT_ERR("%s: firmware is for %x but this is a %x", hdev
->name
,
1513 project_id_to_lmp_subver
[project_id
], lmp_subver
);
1517 epatch_info
= (struct rtl_epatch_header
*)fw
->data
;
1518 if (memcmp(epatch_info
->signature
, RTL_EPATCH_SIGNATURE
, 8) != 0) {
1519 BT_ERR("%s: bad EPATCH signature", hdev
->name
);
1523 num_patches
= le16_to_cpu(epatch_info
->num_patches
);
1524 BT_DBG("fw_version=%x, num_patches=%d",
1525 le32_to_cpu(epatch_info
->fw_version
), num_patches
);
1527 /* After the rtl_epatch_header there is a funky patch metadata section.
1528 * Assuming 2 patches, the layout is:
1529 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
1531 * Find the right patch for this chip.
1533 min_size
+= 8 * num_patches
;
1534 if (fw
->size
< min_size
)
1537 chip_id_base
= fw
->data
+ sizeof(struct rtl_epatch_header
);
1538 patch_length_base
= chip_id_base
+ (sizeof(u16
) * num_patches
);
1539 patch_offset_base
= patch_length_base
+ (sizeof(u16
) * num_patches
);
1540 for (i
= 0; i
< num_patches
; i
++) {
1541 u16 chip_id
= get_unaligned_le16(chip_id_base
+
1543 if (chip_id
== rom_version
+ 1) {
1544 patch_length
= get_unaligned_le16(patch_length_base
+
1546 patch_offset
= get_unaligned_le32(patch_offset_base
+
1552 if (!patch_offset
) {
1553 BT_ERR("%s: didn't find patch for chip id %d",
1554 hdev
->name
, rom_version
);
1558 BT_DBG("length=%x offset=%x index %d", patch_length
, patch_offset
, i
);
1559 min_size
= patch_offset
+ patch_length
;
1560 if (fw
->size
< min_size
)
1563 /* Copy the firmware into a new buffer and write the version at
1567 buf
= kmemdup(fw
->data
+ patch_offset
, patch_length
, GFP_KERNEL
);
1571 memcpy(buf
+ patch_length
- 4, &epatch_info
->fw_version
, 4);
1577 static int rtl_download_firmware(struct hci_dev
*hdev
,
1578 const unsigned char *data
, int fw_len
)
1580 struct rtl_download_cmd
*dl_cmd
;
1581 int frag_num
= fw_len
/ RTL_FRAG_LEN
+ 1;
1582 int frag_len
= RTL_FRAG_LEN
;
1586 dl_cmd
= kmalloc(sizeof(struct rtl_download_cmd
), GFP_KERNEL
);
1590 for (i
= 0; i
< frag_num
; i
++) {
1591 struct rtl_download_response
*dl_resp
;
1592 struct sk_buff
*skb
;
1594 BT_DBG("download fw (%d/%d)", i
, frag_num
);
1597 if (i
== (frag_num
- 1)) {
1598 dl_cmd
->index
|= 0x80; /* data end */
1599 frag_len
= fw_len
% RTL_FRAG_LEN
;
1601 memcpy(dl_cmd
->data
, data
, frag_len
);
1603 /* Send download command */
1604 skb
= __hci_cmd_sync(hdev
, 0xfc20, frag_len
+ 1, dl_cmd
,
1607 BT_ERR("%s: download fw command failed (%ld)",
1608 hdev
->name
, PTR_ERR(skb
));
1609 ret
= -PTR_ERR(skb
);
1613 if (skb
->len
!= sizeof(*dl_resp
)) {
1614 BT_ERR("%s: download fw event length mismatch",
1621 dl_resp
= (struct rtl_download_response
*)skb
->data
;
1622 if (dl_resp
->status
!= 0) {
1624 ret
= bt_to_errno(dl_resp
->status
);
1629 data
+= RTL_FRAG_LEN
;
1637 static int btusb_setup_rtl8723a(struct hci_dev
*hdev
)
1639 struct btusb_data
*data
= dev_get_drvdata(&hdev
->dev
);
1640 struct usb_device
*udev
= interface_to_usbdev(data
->intf
);
1641 const struct firmware
*fw
;
1644 BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev
->name
);
1645 ret
= request_firmware(&fw
, "rtl_bt/rtl8723a_fw.bin", &udev
->dev
);
1647 BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev
->name
);
1656 /* Check that the firmware doesn't have the epatch signature
1657 * (which is only for RTL8723B and newer).
1659 if (!memcmp(fw
->data
, RTL_EPATCH_SIGNATURE
, 8)) {
1660 BT_ERR("%s: unexpected EPATCH signature!", hdev
->name
);
1665 ret
= rtl_download_firmware(hdev
, fw
->data
, fw
->size
);
1668 release_firmware(fw
);
1672 static int btusb_setup_rtl8723b(struct hci_dev
*hdev
, u16 lmp_subver
,
1673 const char *fw_name
)
1675 struct btusb_data
*data
= dev_get_drvdata(&hdev
->dev
);
1676 struct usb_device
*udev
= interface_to_usbdev(data
->intf
);
1677 unsigned char *fw_data
= NULL
;
1678 const struct firmware
*fw
;
1681 BT_INFO("%s: rtl: loading %s", hdev
->name
, fw_name
);
1682 ret
= request_firmware(&fw
, fw_name
, &udev
->dev
);
1684 BT_ERR("%s: Failed to load %s", hdev
->name
, fw_name
);
1688 ret
= rtl8723b_parse_firmware(hdev
, lmp_subver
, fw
, &fw_data
);
1692 ret
= rtl_download_firmware(hdev
, fw_data
, ret
);
1698 release_firmware(fw
);
1702 static int btusb_setup_realtek(struct hci_dev
*hdev
)
1704 struct sk_buff
*skb
;
1705 struct hci_rp_read_local_version
*resp
;
1708 skb
= btusb_read_local_version(hdev
);
1710 return -PTR_ERR(skb
);
1712 resp
= (struct hci_rp_read_local_version
*)skb
->data
;
1713 BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
1714 "lmp_subver=%04x", hdev
->name
, resp
->hci_ver
, resp
->hci_rev
,
1715 resp
->lmp_ver
, resp
->lmp_subver
);
1717 lmp_subver
= le16_to_cpu(resp
->lmp_subver
);
1720 /* Match a set of subver values that correspond to stock firmware,
1721 * which is not compatible with standard btusb.
1722 * If matched, upload an alternative firmware that does conform to
1723 * standard btusb. Once that firmware is uploaded, the subver changes
1724 * to a different value.
1726 switch (lmp_subver
) {
1727 case RTL_ROM_LMP_8723A
:
1728 case RTL_ROM_LMP_3499
:
1729 return btusb_setup_rtl8723a(hdev
);
1730 case RTL_ROM_LMP_8723B
:
1731 return btusb_setup_rtl8723b(hdev
, lmp_subver
,
1732 "rtl_bt/rtl8723b_fw.bin");
1733 case RTL_ROM_LMP_8821A
:
1734 return btusb_setup_rtl8723b(hdev
, lmp_subver
,
1735 "rtl_bt/rtl8821a_fw.bin");
1736 case RTL_ROM_LMP_8761A
:
1737 return btusb_setup_rtl8723b(hdev
, lmp_subver
,
1738 "rtl_bt/rtl8761a_fw.bin");
1740 BT_INFO("rtl: assuming no firmware upload needed.");
1745 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1746 struct intel_version
*ver
)
1748 const struct firmware
*fw
;
1752 snprintf(fwname
, sizeof(fwname
),
1753 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1754 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1755 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1756 ver
->fw_build_ww
, ver
->fw_build_yy
);
1758 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1760 if (ret
== -EINVAL
) {
1761 BT_ERR("%s Intel firmware file request failed (%d)",
1766 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1767 hdev
->name
, fwname
, ret
);
1769 /* If the correct firmware patch file is not found, use the
1770 * default firmware patch file instead
1772 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1773 ver
->hw_platform
, ver
->hw_variant
);
1774 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1775 BT_ERR("%s failed to open default Intel fw file: %s",
1776 hdev
->name
, fwname
);
1781 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1786 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1787 const struct firmware
*fw
,
1788 const u8
**fw_ptr
, int *disable_patch
)
1790 struct sk_buff
*skb
;
1791 struct hci_command_hdr
*cmd
;
1792 const u8
*cmd_param
;
1793 struct hci_event_hdr
*evt
= NULL
;
1794 const u8
*evt_param
= NULL
;
1795 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1797 /* The first byte indicates the types of the patch command or event.
1798 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1799 * in the current firmware buffer doesn't start with 0x01 or
1800 * the size of remain buffer is smaller than HCI command header,
1801 * the firmware file is corrupted and it should stop the patching
1804 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1805 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1811 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1812 *fw_ptr
+= sizeof(*cmd
);
1813 remain
-= sizeof(*cmd
);
1815 /* Ensure that the remain firmware data is long enough than the length
1816 * of command parameter. If not, the firmware file is corrupted.
1818 if (remain
< cmd
->plen
) {
1819 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1823 /* If there is a command that loads a patch in the firmware
1824 * file, then enable the patch upon success, otherwise just
1825 * disable the manufacturer mode, for example patch activation
1826 * is not required when the default firmware patch file is used
1827 * because there are no patch data to load.
1829 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1832 cmd_param
= *fw_ptr
;
1833 *fw_ptr
+= cmd
->plen
;
1834 remain
-= cmd
->plen
;
1836 /* This reads the expected events when the above command is sent to the
1837 * device. Some vendor commands expects more than one events, for
1838 * example command status event followed by vendor specific event.
1839 * For this case, it only keeps the last expected event. so the command
1840 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1841 * last expected event.
1843 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1847 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1848 *fw_ptr
+= sizeof(*evt
);
1849 remain
-= sizeof(*evt
);
1851 if (remain
< evt
->plen
) {
1852 BT_ERR("%s Intel fw corrupted: invalid evt len",
1857 evt_param
= *fw_ptr
;
1858 *fw_ptr
+= evt
->plen
;
1859 remain
-= evt
->plen
;
1862 /* Every HCI commands in the firmware file has its correspond event.
1863 * If event is not found or remain is smaller than zero, the firmware
1864 * file is corrupted.
1866 if (!evt
|| !evt_param
|| remain
< 0) {
1867 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1871 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1872 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1874 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1875 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1876 return PTR_ERR(skb
);
1879 /* It ensures that the returned event matches the event data read from
1880 * the firmware file. At fist, it checks the length and then
1881 * the contents of the event.
1883 if (skb
->len
!= evt
->plen
) {
1884 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1885 le16_to_cpu(cmd
->opcode
));
1890 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1891 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1892 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1901 static int btusb_setup_intel(struct hci_dev
*hdev
)
1903 struct sk_buff
*skb
;
1904 const struct firmware
*fw
;
1907 struct intel_version
*ver
;
1909 const u8 mfg_enable
[] = { 0x01, 0x00 };
1910 const u8 mfg_disable
[] = { 0x00, 0x00 };
1911 const u8 mfg_reset_deactivate
[] = { 0x00, 0x01 };
1912 const u8 mfg_reset_activate
[] = { 0x00, 0x02 };
1914 BT_DBG("%s", hdev
->name
);
1916 /* The controller has a bug with the first HCI command sent to it
1917 * returning number of completed commands as zero. This would stall the
1918 * command processing in the Bluetooth core.
1920 * As a workaround, send HCI Reset command first which will reset the
1921 * number of completed commands and allow normal command processing
1924 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1926 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1927 hdev
->name
, PTR_ERR(skb
));
1928 return PTR_ERR(skb
);
1932 /* Read Intel specific controller version first to allow selection of
1933 * which firmware file to load.
1935 * The returned information are hardware variant and revision plus
1936 * firmware variant, revision and build number.
1938 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
1940 BT_ERR("%s reading Intel fw version command failed (%ld)",
1941 hdev
->name
, PTR_ERR(skb
));
1942 return PTR_ERR(skb
);
1945 if (skb
->len
!= sizeof(*ver
)) {
1946 BT_ERR("%s Intel version event length mismatch", hdev
->name
);
1951 ver
= (struct intel_version
*)skb
->data
;
1953 BT_ERR("%s Intel fw version event failed (%02x)", hdev
->name
,
1956 return -bt_to_errno(ver
->status
);
1959 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1960 hdev
->name
, ver
->hw_platform
, ver
->hw_variant
,
1961 ver
->hw_revision
, ver
->fw_variant
, ver
->fw_revision
,
1962 ver
->fw_build_num
, ver
->fw_build_ww
, ver
->fw_build_yy
,
1965 /* fw_patch_num indicates the version of patch the device currently
1966 * have. If there is no patch data in the device, it is always 0x00.
1967 * So, if it is other than 0x00, no need to patch the deivce again.
1969 if (ver
->fw_patch_num
) {
1970 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1971 hdev
->name
, ver
->fw_patch_num
);
1973 btintel_check_bdaddr(hdev
);
1977 /* Opens the firmware patch file based on the firmware version read
1978 * from the controller. If it fails to open the matching firmware
1979 * patch file, it tries to open the default firmware patch file.
1980 * If no patch file is found, allow the device to operate without
1983 fw
= btusb_setup_intel_get_fw(hdev
, ver
);
1986 btintel_check_bdaddr(hdev
);
1991 /* This Intel specific command enables the manufacturer mode of the
1994 * Only while this mode is enabled, the driver can download the
1995 * firmware patch data and configuration parameters.
1997 skb
= __hci_cmd_sync(hdev
, 0xfc11, 2, mfg_enable
, HCI_INIT_TIMEOUT
);
1999 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
2000 hdev
->name
, PTR_ERR(skb
));
2001 release_firmware(fw
);
2002 return PTR_ERR(skb
);
2006 u8 evt_status
= skb
->data
[0];
2008 BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
2009 hdev
->name
, evt_status
);
2011 release_firmware(fw
);
2012 return -bt_to_errno(evt_status
);
2018 /* The firmware data file consists of list of Intel specific HCI
2019 * commands and its expected events. The first byte indicates the
2020 * type of the message, either HCI command or HCI event.
2022 * It reads the command and its expected event from the firmware file,
2023 * and send to the controller. Once __hci_cmd_sync_ev() returns,
2024 * the returned event is compared with the event read from the firmware
2025 * file and it will continue until all the messages are downloaded to
2028 * Once the firmware patching is completed successfully,
2029 * the manufacturer mode is disabled with reset and activating the
2032 * If the firmware patching fails, the manufacturer mode is
2033 * disabled with reset and deactivating the patch.
2035 * If the default patch file is used, no reset is done when disabling
2038 while (fw
->size
> fw_ptr
- fw
->data
) {
2041 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
2044 goto exit_mfg_deactivate
;
2047 release_firmware(fw
);
2050 goto exit_mfg_disable
;
2052 /* Patching completed successfully and disable the manufacturer mode
2053 * with reset and activate the downloaded firmware patches.
2055 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_activate
),
2056 mfg_reset_activate
, HCI_INIT_TIMEOUT
);
2058 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2059 hdev
->name
, PTR_ERR(skb
));
2060 return PTR_ERR(skb
);
2064 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
2067 btintel_check_bdaddr(hdev
);
2071 /* Disable the manufacturer mode without reset */
2072 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_disable
), mfg_disable
,
2075 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2076 hdev
->name
, PTR_ERR(skb
));
2077 return PTR_ERR(skb
);
2081 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
2083 btintel_check_bdaddr(hdev
);
2086 exit_mfg_deactivate
:
2087 release_firmware(fw
);
2089 /* Patching failed. Disable the manufacturer mode with reset and
2090 * deactivate the downloaded firmware patches.
2092 skb
= __hci_cmd_sync(hdev
, 0xfc11, sizeof(mfg_reset_deactivate
),
2093 mfg_reset_deactivate
, HCI_INIT_TIMEOUT
);
2095 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
2096 hdev
->name
, PTR_ERR(skb
));
2097 return PTR_ERR(skb
);
2101 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
2104 btintel_check_bdaddr(hdev
);
2108 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
2110 struct sk_buff
*skb
;
2111 struct hci_event_hdr
*hdr
;
2112 struct hci_ev_cmd_complete
*evt
;
2114 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
2118 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
2119 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
2120 hdr
->plen
= sizeof(*evt
) + 1;
2122 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
2124 evt
->opcode
= cpu_to_le16(opcode
);
2126 *skb_put(skb
, 1) = 0x00;
2128 bt_cb(skb
)->pkt_type
= HCI_EVENT_PKT
;
2130 return hci_recv_frame(hdev
, skb
);
2133 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
2136 /* When the device is in bootloader mode, then it can send
2137 * events via the bulk endpoint. These events are treated the
2138 * same way as the ones received from the interrupt endpoint.
2140 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
2141 return btusb_recv_intr(data
, buffer
, count
);
2143 return btusb_recv_bulk(data
, buffer
, count
);
2146 static void btusb_intel_bootup(struct btusb_data
*data
, const void *ptr
,
2149 const struct intel_bootup
*evt
= ptr
;
2151 if (len
!= sizeof(*evt
))
2154 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
2155 smp_mb__after_atomic();
2156 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
2160 static void btusb_intel_secure_send_result(struct btusb_data
*data
,
2161 const void *ptr
, unsigned int len
)
2163 const struct intel_secure_send_result
*evt
= ptr
;
2165 if (len
!= sizeof(*evt
))
2169 set_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
2171 if (test_and_clear_bit(BTUSB_DOWNLOADING
, &data
->flags
) &&
2172 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
2173 smp_mb__after_atomic();
2174 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
2178 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
2180 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2182 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
2183 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
2185 if (skb
->len
> HCI_EVENT_HDR_SIZE
&& hdr
->evt
== 0xff &&
2187 const void *ptr
= skb
->data
+ HCI_EVENT_HDR_SIZE
+ 1;
2188 unsigned int len
= skb
->len
- HCI_EVENT_HDR_SIZE
- 1;
2190 switch (skb
->data
[2]) {
2192 /* When switching to the operational firmware
2193 * the device sends a vendor specific event
2194 * indicating that the bootup completed.
2196 btusb_intel_bootup(data
, ptr
, len
);
2199 /* When the firmware loading completes the
2200 * device sends out a vendor specific event
2201 * indicating the result of the firmware
2204 btusb_intel_secure_send_result(data
, ptr
, len
);
2210 return hci_recv_frame(hdev
, skb
);
2213 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
2215 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2218 BT_DBG("%s", hdev
->name
);
2220 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
2223 switch (bt_cb(skb
)->pkt_type
) {
2224 case HCI_COMMAND_PKT
:
2225 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
2226 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
2227 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
2229 /* When in bootloader mode and the command 0xfc09
2230 * is received, it needs to be send down the
2231 * bulk endpoint. So allocate a bulk URB instead.
2233 if (opcode
== 0xfc09)
2234 urb
= alloc_bulk_urb(hdev
, skb
);
2236 urb
= alloc_ctrl_urb(hdev
, skb
);
2238 /* When the 0xfc01 command is issued to boot into
2239 * the operational firmware, it will actually not
2240 * send a command complete event. To keep the flow
2241 * control working inject that event here.
2243 if (opcode
== 0xfc01)
2244 inject_cmd_complete(hdev
, opcode
);
2246 urb
= alloc_ctrl_urb(hdev
, skb
);
2249 return PTR_ERR(urb
);
2251 hdev
->stat
.cmd_tx
++;
2252 return submit_or_queue_tx_urb(hdev
, urb
);
2254 case HCI_ACLDATA_PKT
:
2255 urb
= alloc_bulk_urb(hdev
, skb
);
2257 return PTR_ERR(urb
);
2259 hdev
->stat
.acl_tx
++;
2260 return submit_or_queue_tx_urb(hdev
, urb
);
2262 case HCI_SCODATA_PKT
:
2263 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
2266 urb
= alloc_isoc_urb(hdev
, skb
);
2268 return PTR_ERR(urb
);
2270 hdev
->stat
.sco_tx
++;
2271 return submit_tx_urb(hdev
, urb
);
2277 static int btusb_intel_secure_send(struct hci_dev
*hdev
, u8 fragment_type
,
2278 u32 plen
, const void *param
)
2281 struct sk_buff
*skb
;
2282 u8 cmd_param
[253], fragment_len
= (plen
> 252) ? 252 : plen
;
2284 cmd_param
[0] = fragment_type
;
2285 memcpy(cmd_param
+ 1, param
, fragment_len
);
2287 skb
= __hci_cmd_sync(hdev
, 0xfc09, fragment_len
+ 1,
2288 cmd_param
, HCI_INIT_TIMEOUT
);
2290 return PTR_ERR(skb
);
2294 plen
-= fragment_len
;
2295 param
+= fragment_len
;
2301 static void btusb_intel_version_info(struct hci_dev
*hdev
,
2302 struct intel_version
*ver
)
2304 const char *variant
;
2306 switch (ver
->fw_variant
) {
2308 variant
= "Bootloader";
2311 variant
= "Firmware";
2317 BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev
->name
,
2318 variant
, ver
->fw_revision
>> 4, ver
->fw_revision
& 0x0f,
2319 ver
->fw_build_num
, ver
->fw_build_ww
, 2000 + ver
->fw_build_yy
);
2322 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
2324 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
2325 0x00, 0x08, 0x04, 0x00 };
2326 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2327 struct sk_buff
*skb
;
2328 struct intel_version
*ver
;
2329 struct intel_boot_params
*params
;
2330 const struct firmware
*fw
;
2333 ktime_t calltime
, delta
, rettime
;
2334 unsigned long long duration
;
2337 BT_DBG("%s", hdev
->name
);
2339 calltime
= ktime_get();
2341 /* Read the Intel version information to determine if the device
2342 * is in bootloader mode or if it already has operational firmware
2345 skb
= __hci_cmd_sync(hdev
, 0xfc05, 0, NULL
, HCI_INIT_TIMEOUT
);
2347 BT_ERR("%s: Reading Intel version information failed (%ld)",
2348 hdev
->name
, PTR_ERR(skb
));
2349 return PTR_ERR(skb
);
2352 if (skb
->len
!= sizeof(*ver
)) {
2353 BT_ERR("%s: Intel version event size mismatch", hdev
->name
);
2358 ver
= (struct intel_version
*)skb
->data
;
2360 BT_ERR("%s: Intel version command failure (%02x)",
2361 hdev
->name
, ver
->status
);
2362 err
= -bt_to_errno(ver
->status
);
2367 /* The hardware platform number has a fixed value of 0x37 and
2368 * for now only accept this single value.
2370 if (ver
->hw_platform
!= 0x37) {
2371 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2372 hdev
->name
, ver
->hw_platform
);
2377 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2378 * supported by this firmware loading method. This check has been
2379 * put in place to ensure correct forward compatibility options
2380 * when newer hardware variants come along.
2382 if (ver
->hw_variant
!= 0x0b) {
2383 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2384 hdev
->name
, ver
->hw_variant
);
2389 btusb_intel_version_info(hdev
, ver
);
2391 /* The firmware variant determines if the device is in bootloader
2392 * mode or is running operational firmware. The value 0x06 identifies
2393 * the bootloader and the value 0x23 identifies the operational
2396 * When the operational firmware is already present, then only
2397 * the check for valid Bluetooth device address is needed. This
2398 * determines if the device will be added as configured or
2399 * unconfigured controller.
2401 * It is not possible to use the Secure Boot Parameters in this
2402 * case since that command is only available in bootloader mode.
2404 if (ver
->fw_variant
== 0x23) {
2406 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2407 btintel_check_bdaddr(hdev
);
2411 /* If the device is not in bootloader mode, then the only possible
2412 * choice is to return an error and abort the device initialization.
2414 if (ver
->fw_variant
!= 0x06) {
2415 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2416 hdev
->name
, ver
->fw_variant
);
2423 /* Read the secure boot parameters to identify the operating
2424 * details of the bootloader.
2426 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2428 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2429 hdev
->name
, PTR_ERR(skb
));
2430 return PTR_ERR(skb
);
2433 if (skb
->len
!= sizeof(*params
)) {
2434 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2439 params
= (struct intel_boot_params
*)skb
->data
;
2440 if (params
->status
) {
2441 BT_ERR("%s: Intel boot parameters command failure (%02x)",
2442 hdev
->name
, params
->status
);
2443 err
= -bt_to_errno(params
->status
);
2448 BT_INFO("%s: Device revision is %u", hdev
->name
,
2449 le16_to_cpu(params
->dev_revid
));
2451 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2452 params
->secure_boot
? "enabled" : "disabled");
2454 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2455 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2456 2000 + params
->min_fw_build_yy
);
2458 /* It is required that every single firmware fragment is acknowledged
2459 * with a command complete event. If the boot parameters indicate
2460 * that this bootloader does not send them, then abort the setup.
2462 if (params
->limited_cce
!= 0x00) {
2463 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2464 hdev
->name
, params
->limited_cce
);
2469 /* If the OTP has no valid Bluetooth device address, then there will
2470 * also be no valid address for the operational firmware.
2472 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2473 BT_INFO("%s: No device address configured", hdev
->name
);
2474 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2477 /* With this Intel bootloader only the hardware variant and device
2478 * revision information are used to select the right firmware.
2480 * Currently this bootloader support is limited to hardware variant
2481 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2483 snprintf(fwname
, sizeof(fwname
), "intel/ibt-11-%u.sfi",
2484 le16_to_cpu(params
->dev_revid
));
2486 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2488 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2494 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2498 if (fw
->size
< 644) {
2499 BT_ERR("%s: Invalid size of firmware file (%zu)",
2500 hdev
->name
, fw
->size
);
2505 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2507 /* Start the firmware download transaction with the Init fragment
2508 * represented by the 128 bytes of CSS header.
2510 err
= btusb_intel_secure_send(hdev
, 0x00, 128, fw
->data
);
2512 BT_ERR("%s: Failed to send firmware header (%d)",
2517 /* Send the 256 bytes of public key information from the firmware
2518 * as the PKey fragment.
2520 err
= btusb_intel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2522 BT_ERR("%s: Failed to send firmware public key (%d)",
2527 /* Send the 256 bytes of signature information from the firmware
2528 * as the Sign fragment.
2530 err
= btusb_intel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2532 BT_ERR("%s: Failed to send firmware signature (%d)",
2537 fw_ptr
= fw
->data
+ 644;
2539 while (fw_ptr
- fw
->data
< fw
->size
) {
2540 struct hci_command_hdr
*cmd
= (void *)fw_ptr
;
2543 cmd_len
= sizeof(*cmd
) + cmd
->plen
;
2545 /* Send each command from the firmware data buffer as
2546 * a single Data fragment.
2548 err
= btusb_intel_secure_send(hdev
, 0x01, cmd_len
, fw_ptr
);
2550 BT_ERR("%s: Failed to send firmware data (%d)",
2558 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2560 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2562 /* Before switching the device into operational mode and with that
2563 * booting the loaded firmware, wait for the bootloader notification
2564 * that all fragments have been successfully received.
2566 * When the event processing receives the notification, then the
2567 * BTUSB_DOWNLOADING flag will be cleared.
2569 * The firmware loading should not take longer than 5 seconds
2570 * and thus just timeout if that happens and fail the setup
2573 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2575 msecs_to_jiffies(5000));
2577 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2583 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2588 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2589 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2594 rettime
= ktime_get();
2595 delta
= ktime_sub(rettime
, calltime
);
2596 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2598 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2601 release_firmware(fw
);
2606 calltime
= ktime_get();
2608 set_bit(BTUSB_BOOTING
, &data
->flags
);
2610 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2613 return PTR_ERR(skb
);
2617 /* The bootloader will not indicate when the device is ready. This
2618 * is done by the operational firmware sending bootup notification.
2620 * Booting into operational firmware should not take longer than
2621 * 1 second. However if that happens, then just fail the setup
2622 * since something went wrong.
2624 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2626 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2628 msecs_to_jiffies(1000));
2631 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2636 BT_ERR("%s: Device boot timeout", hdev
->name
);
2640 rettime
= ktime_get();
2641 delta
= ktime_sub(rettime
, calltime
);
2642 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2644 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2646 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2651 static void btusb_hw_error_intel(struct hci_dev
*hdev
, u8 code
)
2653 struct sk_buff
*skb
;
2656 BT_ERR("%s: Hardware error 0x%2.2x", hdev
->name
, code
);
2658 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
2660 BT_ERR("%s: Reset after hardware error failed (%ld)",
2661 hdev
->name
, PTR_ERR(skb
));
2666 skb
= __hci_cmd_sync(hdev
, 0xfc22, 1, &type
, HCI_INIT_TIMEOUT
);
2668 BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
2669 hdev
->name
, PTR_ERR(skb
));
2673 if (skb
->len
!= 13) {
2674 BT_ERR("%s: Exception info size mismatch", hdev
->name
);
2679 if (skb
->data
[0] != 0x00) {
2680 BT_ERR("%s: Exception info command failure (%02x)",
2681 hdev
->name
, skb
->data
[0]);
2686 BT_ERR("%s: Exception info %s", hdev
->name
, (char *)(skb
->data
+ 1));
2691 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2693 struct sk_buff
*skb
;
2696 /* Some platforms have an issue with BT LED when the interface is
2697 * down or BT radio is turned off, which takes 5 seconds to BT LED
2698 * goes off. This command turns off the BT LED immediately.
2700 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2703 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2712 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2713 const bdaddr_t
*bdaddr
)
2715 struct sk_buff
*skb
;
2720 buf
[1] = sizeof(bdaddr_t
);
2721 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2723 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2726 BT_ERR("%s: changing Marvell device address failed (%ld)",
2735 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2736 const bdaddr_t
*bdaddr
)
2738 struct sk_buff
*skb
;
2745 buf
[3] = sizeof(bdaddr_t
);
2746 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2748 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2751 BT_ERR("%s: Change address command failed (%ld)",
2760 #define QCA_DFU_PACKET_LEN 4096
2762 #define QCA_GET_TARGET_VERSION 0x09
2763 #define QCA_CHECK_STATUS 0x05
2764 #define QCA_DFU_DOWNLOAD 0x01
2766 #define QCA_SYSCFG_UPDATED 0x40
2767 #define QCA_PATCH_UPDATED 0x80
2768 #define QCA_DFU_TIMEOUT 3000
2770 struct qca_version
{
2772 __le32 patch_version
;
2778 struct qca_rampatch_version
{
2780 __le16 patch_version
;
2783 struct qca_device_info
{
2785 u8 rampatch_hdr
; /* length of header in rampatch */
2786 u8 nvm_hdr
; /* length of header in NVM */
2787 u8 ver_offset
; /* offset of version structure in rampatch */
2790 static const struct qca_device_info qca_devices_table
[] = {
2791 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2792 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2793 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2794 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2795 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2798 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2799 void *data
, u16 size
)
2801 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2802 struct usb_device
*udev
= btdata
->udev
;
2806 buf
= kmalloc(size
, GFP_KERNEL
);
2810 /* Found some of USB hosts have IOT issues with ours so that we should
2811 * not wait until HCI layer is ready.
2813 pipe
= usb_rcvctrlpipe(udev
, 0);
2814 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2815 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2817 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2821 memcpy(data
, buf
, size
);
2829 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2830 const struct firmware
*firmware
,
2833 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2834 struct usb_device
*udev
= btdata
->udev
;
2835 size_t count
, size
, sent
= 0;
2839 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2843 count
= firmware
->size
;
2845 size
= min_t(size_t, count
, hdr_size
);
2846 memcpy(buf
, firmware
->data
, size
);
2848 /* USB patches should go down to controller through USB path
2849 * because binary format fits to go down through USB channel.
2850 * USB control path is for patching headers and USB bulk is for
2853 pipe
= usb_sndctrlpipe(udev
, 0);
2854 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2855 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2857 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2865 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2867 memcpy(buf
, firmware
->data
+ sent
, size
);
2869 pipe
= usb_sndbulkpipe(udev
, 0x02);
2870 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2873 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2874 hdev
->name
, sent
, firmware
->size
, err
);
2879 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2893 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2894 struct qca_version
*ver
,
2895 const struct qca_device_info
*info
)
2897 struct qca_rampatch_version
*rver
;
2898 const struct firmware
*fw
;
2899 u32 ver_rom
, ver_patch
;
2900 u16 rver_rom
, rver_patch
;
2904 ver_rom
= le32_to_cpu(ver
->rom_version
);
2905 ver_patch
= le32_to_cpu(ver
->patch_version
);
2907 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2909 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2911 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2912 hdev
->name
, fwname
, err
);
2916 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2918 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2919 rver_rom
= le16_to_cpu(rver
->rom_version
);
2920 rver_patch
= le16_to_cpu(rver
->patch_version
);
2922 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2923 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2926 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2927 BT_ERR("%s: rampatch file version did not match with firmware",
2933 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2936 release_firmware(fw
);
2941 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2942 struct qca_version
*ver
,
2943 const struct qca_device_info
*info
)
2945 const struct firmware
*fw
;
2949 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2950 le32_to_cpu(ver
->rom_version
));
2952 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2954 BT_ERR("%s: failed to request NVM file: %s (%d)",
2955 hdev
->name
, fwname
, err
);
2959 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2961 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2963 release_firmware(fw
);
2968 static int btusb_setup_qca(struct hci_dev
*hdev
)
2970 const struct qca_device_info
*info
= NULL
;
2971 struct qca_version ver
;
2976 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2981 ver_rom
= le32_to_cpu(ver
.rom_version
);
2982 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2983 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2984 info
= &qca_devices_table
[i
];
2987 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2992 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2997 if (!(status
& QCA_PATCH_UPDATED
)) {
2998 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
3003 if (!(status
& QCA_SYSCFG_UPDATED
)) {
3004 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
3012 static int btusb_probe(struct usb_interface
*intf
,
3013 const struct usb_device_id
*id
)
3015 struct usb_endpoint_descriptor
*ep_desc
;
3016 struct btusb_data
*data
;
3017 struct hci_dev
*hdev
;
3020 BT_DBG("intf %p id %p", intf
, id
);
3022 /* interface numbers are hardcoded in the spec */
3023 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0)
3026 if (!id
->driver_info
) {
3027 const struct usb_device_id
*match
;
3029 match
= usb_match_id(intf
, blacklist_table
);
3034 if (id
->driver_info
== BTUSB_IGNORE
)
3037 if (id
->driver_info
& BTUSB_ATH3012
) {
3038 struct usb_device
*udev
= interface_to_usbdev(intf
);
3040 /* Old firmware would otherwise let ath3k driver load
3041 * patch and sysconfig files */
3042 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
3046 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
3050 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
3051 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
3053 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
3054 data
->intr_ep
= ep_desc
;
3058 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
3059 data
->bulk_tx_ep
= ep_desc
;
3063 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
3064 data
->bulk_rx_ep
= ep_desc
;
3069 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
3072 if (id
->driver_info
& BTUSB_AMP
) {
3073 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
3074 data
->cmdreq
= 0x2b;
3076 data
->cmdreq_type
= USB_TYPE_CLASS
;
3077 data
->cmdreq
= 0x00;
3080 data
->udev
= interface_to_usbdev(intf
);
3083 INIT_WORK(&data
->work
, btusb_work
);
3084 INIT_WORK(&data
->waker
, btusb_waker
);
3085 init_usb_anchor(&data
->deferred
);
3086 init_usb_anchor(&data
->tx_anchor
);
3087 spin_lock_init(&data
->txlock
);
3089 init_usb_anchor(&data
->intr_anchor
);
3090 init_usb_anchor(&data
->bulk_anchor
);
3091 init_usb_anchor(&data
->isoc_anchor
);
3092 spin_lock_init(&data
->rxlock
);
3094 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
3095 data
->recv_event
= btusb_recv_event_intel
;
3096 data
->recv_bulk
= btusb_recv_bulk_intel
;
3097 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
3099 data
->recv_event
= hci_recv_frame
;
3100 data
->recv_bulk
= btusb_recv_bulk
;
3103 hdev
= hci_alloc_dev();
3107 hdev
->bus
= HCI_USB
;
3108 hci_set_drvdata(hdev
, data
);
3110 if (id
->driver_info
& BTUSB_AMP
)
3111 hdev
->dev_type
= HCI_AMP
;
3113 hdev
->dev_type
= HCI_BREDR
;
3117 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
3119 hdev
->open
= btusb_open
;
3120 hdev
->close
= btusb_close
;
3121 hdev
->flush
= btusb_flush
;
3122 hdev
->send
= btusb_send_frame
;
3123 hdev
->notify
= btusb_notify
;
3125 if (id
->driver_info
& BTUSB_BCM92035
)
3126 hdev
->setup
= btusb_setup_bcm92035
;
3128 #ifdef CONFIG_BT_HCIBTUSB_BCM
3129 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
3130 hdev
->setup
= btbcm_setup_patchram
;
3131 hdev
->set_bdaddr
= btbcm_set_bdaddr
;
3134 if (id
->driver_info
& BTUSB_BCM_APPLE
)
3135 hdev
->setup
= btbcm_setup_apple
;
3138 if (id
->driver_info
& BTUSB_INTEL
) {
3139 hdev
->setup
= btusb_setup_intel
;
3140 hdev
->shutdown
= btusb_shutdown_intel
;
3141 hdev
->set_bdaddr
= btintel_set_bdaddr
;
3142 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3143 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3146 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
3147 hdev
->send
= btusb_send_frame_intel
;
3148 hdev
->setup
= btusb_setup_intel_new
;
3149 hdev
->hw_error
= btusb_hw_error_intel
;
3150 hdev
->set_bdaddr
= btintel_set_bdaddr
;
3151 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3154 if (id
->driver_info
& BTUSB_MARVELL
)
3155 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
3157 if (id
->driver_info
& BTUSB_SWAVE
) {
3158 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
3159 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
3162 if (id
->driver_info
& BTUSB_INTEL_BOOT
)
3163 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
3165 if (id
->driver_info
& BTUSB_ATH3012
) {
3166 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
3167 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3168 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
3171 if (id
->driver_info
& BTUSB_QCA_ROME
) {
3172 data
->setup_on_usb
= btusb_setup_qca
;
3173 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
3176 if (id
->driver_info
& BTUSB_REALTEK
)
3177 hdev
->setup
= btusb_setup_realtek
;
3179 if (id
->driver_info
& BTUSB_AMP
) {
3180 /* AMP controllers do not support SCO packets */
3183 /* Interface numbers are hardcoded in the specification */
3184 data
->isoc
= usb_ifnum_to_if(data
->udev
, 1);
3188 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3190 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
3191 if (!disable_scofix
)
3192 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
3195 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
3198 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
3199 data
->cmdreq_type
= USB_TYPE_VENDOR
;
3200 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3203 if (id
->driver_info
& BTUSB_CSR
) {
3204 struct usb_device
*udev
= data
->udev
;
3205 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
3207 /* Old firmware would otherwise execute USB reset */
3208 if (bcdDevice
< 0x117)
3209 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
3211 /* Fake CSR devices with broken commands */
3212 if (bcdDevice
<= 0x100)
3213 hdev
->setup
= btusb_setup_csr
;
3215 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
3218 if (id
->driver_info
& BTUSB_SNIFFER
) {
3219 struct usb_device
*udev
= data
->udev
;
3221 /* New sniffer firmware has crippled HCI interface */
3222 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
3223 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
3226 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
3227 /* A bug in the bootloader causes that interrupt interface is
3228 * only enabled after receiving SetInterface(0, AltSetting=0).
3230 err
= usb_set_interface(data
->udev
, 0, 0);
3232 BT_ERR("failed to set interface 0, alt 0 %d", err
);
3239 err
= usb_driver_claim_interface(&btusb_driver
,
3247 err
= hci_register_dev(hdev
);
3253 usb_set_intfdata(intf
, data
);
3258 static void btusb_disconnect(struct usb_interface
*intf
)
3260 struct btusb_data
*data
= usb_get_intfdata(intf
);
3261 struct hci_dev
*hdev
;
3263 BT_DBG("intf %p", intf
);
3269 usb_set_intfdata(data
->intf
, NULL
);
3272 usb_set_intfdata(data
->isoc
, NULL
);
3274 hci_unregister_dev(hdev
);
3276 if (intf
== data
->isoc
)
3277 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3278 else if (data
->isoc
)
3279 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3285 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3287 struct btusb_data
*data
= usb_get_intfdata(intf
);
3289 BT_DBG("intf %p", intf
);
3291 if (data
->suspend_count
++)
3294 spin_lock_irq(&data
->txlock
);
3295 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3296 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3297 spin_unlock_irq(&data
->txlock
);
3299 spin_unlock_irq(&data
->txlock
);
3300 data
->suspend_count
--;
3304 cancel_work_sync(&data
->work
);
3306 btusb_stop_traffic(data
);
3307 usb_kill_anchored_urbs(&data
->tx_anchor
);
3312 static void play_deferred(struct btusb_data
*data
)
3317 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3318 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3322 data
->tx_in_flight
++;
3324 usb_scuttle_anchored_urbs(&data
->deferred
);
3327 static int btusb_resume(struct usb_interface
*intf
)
3329 struct btusb_data
*data
= usb_get_intfdata(intf
);
3330 struct hci_dev
*hdev
= data
->hdev
;
3333 BT_DBG("intf %p", intf
);
3335 if (--data
->suspend_count
)
3338 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3341 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3342 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3344 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3349 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3350 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3352 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3356 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3359 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3360 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3361 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3363 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3366 spin_lock_irq(&data
->txlock
);
3367 play_deferred(data
);
3368 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3369 spin_unlock_irq(&data
->txlock
);
3370 schedule_work(&data
->work
);
3375 usb_scuttle_anchored_urbs(&data
->deferred
);
3377 spin_lock_irq(&data
->txlock
);
3378 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3379 spin_unlock_irq(&data
->txlock
);
3385 static struct usb_driver btusb_driver
= {
3387 .probe
= btusb_probe
,
3388 .disconnect
= btusb_disconnect
,
3390 .suspend
= btusb_suspend
,
3391 .resume
= btusb_resume
,
3393 .id_table
= btusb_table
,
3394 .supports_autosuspend
= 1,
3395 .disable_hub_initiated_lpm
= 1,
3398 module_usb_driver(btusb_driver
);
3400 module_param(disable_scofix
, bool, 0644);
3401 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3403 module_param(force_scofix
, bool, 0644);
3404 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3406 module_param(reset
, bool, 0644);
3407 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3409 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3410 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3411 MODULE_VERSION(VERSION
);
3412 MODULE_LICENSE("GPL");