3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix
;
39 static bool force_scofix
;
41 static bool reset
= true;
43 static struct usb_driver btusb_driver
;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
64 #define BTUSB_IFNUM_2 0x80000
66 static const struct usb_device_id btusb_table
[] = {
67 /* Generic Bluetooth USB device */
68 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
70 /* Generic Bluetooth AMP device */
71 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info
= BTUSB_AMP
},
73 /* Generic Bluetooth USB interface */
74 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
76 /* Apple-specific (Broadcom) devices */
77 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
78 .driver_info
= BTUSB_BCM_APPLE
| BTUSB_IFNUM_2
},
80 /* MediaTek MT76x0E */
81 { USB_DEVICE(0x0e8d, 0x763f) },
83 /* Broadcom SoftSailing reporting vendor specific */
84 { USB_DEVICE(0x0a5c, 0x21e1) },
86 /* Apple MacBookPro 7,1 */
87 { USB_DEVICE(0x05ac, 0x8213) },
90 { USB_DEVICE(0x05ac, 0x8215) },
92 /* Apple MacBookPro6,2 */
93 { USB_DEVICE(0x05ac, 0x8218) },
95 /* Apple MacBookAir3,1, MacBookAir3,2 */
96 { USB_DEVICE(0x05ac, 0x821b) },
98 /* Apple MacBookAir4,1 */
99 { USB_DEVICE(0x05ac, 0x821f) },
101 /* Apple MacBookPro8,2 */
102 { USB_DEVICE(0x05ac, 0x821a) },
104 /* Apple MacMini5,1 */
105 { USB_DEVICE(0x05ac, 0x8281) },
107 /* AVM BlueFRITZ! USB v2.0 */
108 { USB_DEVICE(0x057c, 0x3800), .driver_info
= BTUSB_SWAVE
},
110 /* Bluetooth Ultraport Module from IBM */
111 { USB_DEVICE(0x04bf, 0x030a) },
113 /* ALPS Modules with non-standard id */
114 { USB_DEVICE(0x044e, 0x3001) },
115 { USB_DEVICE(0x044e, 0x3002) },
117 /* Ericsson with non-standard id */
118 { USB_DEVICE(0x0bdb, 0x1002) },
120 /* Canyon CN-BTU1 with HID interfaces */
121 { USB_DEVICE(0x0c10, 0x0000) },
123 /* Broadcom BCM20702A0 */
124 { USB_DEVICE(0x413c, 0x8197) },
126 /* Broadcom BCM20702B0 (Dynex/Insignia) */
127 { USB_DEVICE(0x19ff, 0x0239), .driver_info
= BTUSB_BCM_PATCHRAM
},
129 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
130 { USB_DEVICE(0x105b, 0xe065), .driver_info
= BTUSB_BCM_PATCHRAM
},
132 /* Foxconn - Hon Hai */
133 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
134 .driver_info
= BTUSB_BCM_PATCHRAM
},
136 /* Lite-On Technology - Broadcom based */
137 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
138 .driver_info
= BTUSB_BCM_PATCHRAM
},
140 /* Broadcom devices with vendor specific id */
141 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
142 .driver_info
= BTUSB_BCM_PATCHRAM
},
144 /* ASUSTek Computer - Broadcom based */
145 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
146 .driver_info
= BTUSB_BCM_PATCHRAM
},
148 /* Belkin F8065bf - Broadcom based */
149 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
150 .driver_info
= BTUSB_BCM_PATCHRAM
},
152 /* IMC Networks - Broadcom based */
153 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
154 .driver_info
= BTUSB_BCM_PATCHRAM
},
156 /* Toshiba Corp - Broadcom based */
157 { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
158 .driver_info
= BTUSB_BCM_PATCHRAM
},
160 /* Intel Bluetooth USB Bootloader (RAM module) */
161 { USB_DEVICE(0x8087, 0x0a5a),
162 .driver_info
= BTUSB_INTEL_BOOT
| BTUSB_BROKEN_ISOC
},
164 { } /* Terminating entry */
167 MODULE_DEVICE_TABLE(usb
, btusb_table
);
169 static const struct usb_device_id blacklist_table
[] = {
170 /* CSR BlueCore devices */
171 { USB_DEVICE(0x0a12, 0x0001), .driver_info
= BTUSB_CSR
},
173 /* Broadcom BCM2033 without firmware */
174 { USB_DEVICE(0x0a5c, 0x2033), .driver_info
= BTUSB_IGNORE
},
176 /* Broadcom BCM2045 devices */
177 { USB_DEVICE(0x0a5c, 0x2045), .driver_info
= BTUSB_BCM2045
},
179 /* Atheros 3011 with sflash firmware */
180 { USB_DEVICE(0x0489, 0xe027), .driver_info
= BTUSB_IGNORE
},
181 { USB_DEVICE(0x0489, 0xe03d), .driver_info
= BTUSB_IGNORE
},
182 { USB_DEVICE(0x04f2, 0xaff1), .driver_info
= BTUSB_IGNORE
},
183 { USB_DEVICE(0x0930, 0x0215), .driver_info
= BTUSB_IGNORE
},
184 { USB_DEVICE(0x0cf3, 0x3002), .driver_info
= BTUSB_IGNORE
},
185 { USB_DEVICE(0x0cf3, 0xe019), .driver_info
= BTUSB_IGNORE
},
186 { USB_DEVICE(0x13d3, 0x3304), .driver_info
= BTUSB_IGNORE
},
188 /* Atheros AR9285 Malbec with sflash firmware */
189 { USB_DEVICE(0x03f0, 0x311d), .driver_info
= BTUSB_IGNORE
},
191 /* Atheros 3012 with sflash firmware */
192 { USB_DEVICE(0x0489, 0xe04d), .driver_info
= BTUSB_ATH3012
},
193 { USB_DEVICE(0x0489, 0xe04e), .driver_info
= BTUSB_ATH3012
},
194 { USB_DEVICE(0x0489, 0xe056), .driver_info
= BTUSB_ATH3012
},
195 { USB_DEVICE(0x0489, 0xe057), .driver_info
= BTUSB_ATH3012
},
196 { USB_DEVICE(0x0489, 0xe05f), .driver_info
= BTUSB_ATH3012
},
197 { USB_DEVICE(0x0489, 0xe076), .driver_info
= BTUSB_ATH3012
},
198 { USB_DEVICE(0x0489, 0xe078), .driver_info
= BTUSB_ATH3012
},
199 { USB_DEVICE(0x0489, 0xe095), .driver_info
= BTUSB_ATH3012
},
200 { USB_DEVICE(0x04c5, 0x1330), .driver_info
= BTUSB_ATH3012
},
201 { USB_DEVICE(0x04ca, 0x3004), .driver_info
= BTUSB_ATH3012
},
202 { USB_DEVICE(0x04ca, 0x3005), .driver_info
= BTUSB_ATH3012
},
203 { USB_DEVICE(0x04ca, 0x3006), .driver_info
= BTUSB_ATH3012
},
204 { USB_DEVICE(0x04ca, 0x3007), .driver_info
= BTUSB_ATH3012
},
205 { USB_DEVICE(0x04ca, 0x3008), .driver_info
= BTUSB_ATH3012
},
206 { USB_DEVICE(0x04ca, 0x300b), .driver_info
= BTUSB_ATH3012
},
207 { USB_DEVICE(0x04ca, 0x300d), .driver_info
= BTUSB_ATH3012
},
208 { USB_DEVICE(0x04ca, 0x300f), .driver_info
= BTUSB_ATH3012
},
209 { USB_DEVICE(0x04ca, 0x3010), .driver_info
= BTUSB_ATH3012
},
210 { USB_DEVICE(0x04ca, 0x3014), .driver_info
= BTUSB_ATH3012
},
211 { USB_DEVICE(0x0930, 0x0219), .driver_info
= BTUSB_ATH3012
},
212 { USB_DEVICE(0x0930, 0x021c), .driver_info
= BTUSB_ATH3012
},
213 { USB_DEVICE(0x0930, 0x0220), .driver_info
= BTUSB_ATH3012
},
214 { USB_DEVICE(0x0930, 0x0227), .driver_info
= BTUSB_ATH3012
},
215 { USB_DEVICE(0x0b05, 0x17d0), .driver_info
= BTUSB_ATH3012
},
216 { USB_DEVICE(0x0cf3, 0x0036), .driver_info
= BTUSB_ATH3012
},
217 { USB_DEVICE(0x0cf3, 0x3004), .driver_info
= BTUSB_ATH3012
},
218 { USB_DEVICE(0x0cf3, 0x3008), .driver_info
= BTUSB_ATH3012
},
219 { USB_DEVICE(0x0cf3, 0x311d), .driver_info
= BTUSB_ATH3012
},
220 { USB_DEVICE(0x0cf3, 0x311e), .driver_info
= BTUSB_ATH3012
},
221 { USB_DEVICE(0x0cf3, 0x311f), .driver_info
= BTUSB_ATH3012
},
222 { USB_DEVICE(0x0cf3, 0x3121), .driver_info
= BTUSB_ATH3012
},
223 { USB_DEVICE(0x0cf3, 0x817a), .driver_info
= BTUSB_ATH3012
},
224 { USB_DEVICE(0x0cf3, 0x817b), .driver_info
= BTUSB_ATH3012
},
225 { USB_DEVICE(0x0cf3, 0xe003), .driver_info
= BTUSB_ATH3012
},
226 { USB_DEVICE(0x0cf3, 0xe004), .driver_info
= BTUSB_ATH3012
},
227 { USB_DEVICE(0x0cf3, 0xe005), .driver_info
= BTUSB_ATH3012
},
228 { USB_DEVICE(0x0cf3, 0xe006), .driver_info
= BTUSB_ATH3012
},
229 { USB_DEVICE(0x13d3, 0x3362), .driver_info
= BTUSB_ATH3012
},
230 { USB_DEVICE(0x13d3, 0x3375), .driver_info
= BTUSB_ATH3012
},
231 { USB_DEVICE(0x13d3, 0x3393), .driver_info
= BTUSB_ATH3012
},
232 { USB_DEVICE(0x13d3, 0x3395), .driver_info
= BTUSB_ATH3012
},
233 { USB_DEVICE(0x13d3, 0x3402), .driver_info
= BTUSB_ATH3012
},
234 { USB_DEVICE(0x13d3, 0x3408), .driver_info
= BTUSB_ATH3012
},
235 { USB_DEVICE(0x13d3, 0x3423), .driver_info
= BTUSB_ATH3012
},
236 { USB_DEVICE(0x13d3, 0x3432), .driver_info
= BTUSB_ATH3012
},
237 { USB_DEVICE(0x13d3, 0x3472), .driver_info
= BTUSB_ATH3012
},
238 { USB_DEVICE(0x13d3, 0x3474), .driver_info
= BTUSB_ATH3012
},
239 { USB_DEVICE(0x13d3, 0x3487), .driver_info
= BTUSB_ATH3012
},
241 /* Atheros AR5BBU12 with sflash firmware */
242 { USB_DEVICE(0x0489, 0xe02c), .driver_info
= BTUSB_IGNORE
},
244 /* Atheros AR5BBU12 with sflash firmware */
245 { USB_DEVICE(0x0489, 0xe036), .driver_info
= BTUSB_ATH3012
},
246 { USB_DEVICE(0x0489, 0xe03c), .driver_info
= BTUSB_ATH3012
},
248 /* QCA ROME chipset */
249 { USB_DEVICE(0x0cf3, 0xe007), .driver_info
= BTUSB_QCA_ROME
},
250 { USB_DEVICE(0x0cf3, 0xe300), .driver_info
= BTUSB_QCA_ROME
},
251 { USB_DEVICE(0x0cf3, 0xe360), .driver_info
= BTUSB_QCA_ROME
},
252 { USB_DEVICE(0x0489, 0xe092), .driver_info
= BTUSB_QCA_ROME
},
254 /* Broadcom BCM2035 */
255 { USB_DEVICE(0x0a5c, 0x2009), .driver_info
= BTUSB_BCM92035
},
256 { USB_DEVICE(0x0a5c, 0x200a), .driver_info
= BTUSB_WRONG_SCO_MTU
},
257 { USB_DEVICE(0x0a5c, 0x2035), .driver_info
= BTUSB_WRONG_SCO_MTU
},
259 /* Broadcom BCM2045 */
260 { USB_DEVICE(0x0a5c, 0x2039), .driver_info
= BTUSB_WRONG_SCO_MTU
},
261 { USB_DEVICE(0x0a5c, 0x2101), .driver_info
= BTUSB_WRONG_SCO_MTU
},
263 /* IBM/Lenovo ThinkPad with Broadcom chip */
264 { USB_DEVICE(0x0a5c, 0x201e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
265 { USB_DEVICE(0x0a5c, 0x2110), .driver_info
= BTUSB_WRONG_SCO_MTU
},
267 /* HP laptop with Broadcom chip */
268 { USB_DEVICE(0x03f0, 0x171d), .driver_info
= BTUSB_WRONG_SCO_MTU
},
270 /* Dell laptop with Broadcom chip */
271 { USB_DEVICE(0x413c, 0x8126), .driver_info
= BTUSB_WRONG_SCO_MTU
},
273 /* Dell Wireless 370 and 410 devices */
274 { USB_DEVICE(0x413c, 0x8152), .driver_info
= BTUSB_WRONG_SCO_MTU
},
275 { USB_DEVICE(0x413c, 0x8156), .driver_info
= BTUSB_WRONG_SCO_MTU
},
277 /* Belkin F8T012 and F8T013 devices */
278 { USB_DEVICE(0x050d, 0x0012), .driver_info
= BTUSB_WRONG_SCO_MTU
},
279 { USB_DEVICE(0x050d, 0x0013), .driver_info
= BTUSB_WRONG_SCO_MTU
},
281 /* Asus WL-BTD202 device */
282 { USB_DEVICE(0x0b05, 0x1715), .driver_info
= BTUSB_WRONG_SCO_MTU
},
284 /* Kensington Bluetooth USB adapter */
285 { USB_DEVICE(0x047d, 0x105e), .driver_info
= BTUSB_WRONG_SCO_MTU
},
287 /* RTX Telecom based adapters with buggy SCO support */
288 { USB_DEVICE(0x0400, 0x0807), .driver_info
= BTUSB_BROKEN_ISOC
},
289 { USB_DEVICE(0x0400, 0x080a), .driver_info
= BTUSB_BROKEN_ISOC
},
291 /* CONWISE Technology based adapters with buggy SCO support */
292 { USB_DEVICE(0x0e5e, 0x6622), .driver_info
= BTUSB_BROKEN_ISOC
},
294 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
295 { USB_DEVICE(0x1310, 0x0001), .driver_info
= BTUSB_SWAVE
},
297 /* Digianswer devices */
298 { USB_DEVICE(0x08fd, 0x0001), .driver_info
= BTUSB_DIGIANSWER
},
299 { USB_DEVICE(0x08fd, 0x0002), .driver_info
= BTUSB_IGNORE
},
301 /* CSR BlueCore Bluetooth Sniffer */
302 { USB_DEVICE(0x0a12, 0x0002),
303 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
305 /* Frontline ComProbe Bluetooth Sniffer */
306 { USB_DEVICE(0x16d3, 0x0002),
307 .driver_info
= BTUSB_SNIFFER
| BTUSB_BROKEN_ISOC
},
309 /* Marvell Bluetooth devices */
310 { USB_DEVICE(0x1286, 0x2044), .driver_info
= BTUSB_MARVELL
},
311 { USB_DEVICE(0x1286, 0x2046), .driver_info
= BTUSB_MARVELL
},
313 /* Intel Bluetooth devices */
314 { USB_DEVICE(0x8087, 0x07da), .driver_info
= BTUSB_CSR
},
315 { USB_DEVICE(0x8087, 0x07dc), .driver_info
= BTUSB_INTEL
},
316 { USB_DEVICE(0x8087, 0x0a2a), .driver_info
= BTUSB_INTEL
},
317 { USB_DEVICE(0x8087, 0x0a2b), .driver_info
= BTUSB_INTEL_NEW
},
318 { USB_DEVICE(0x8087, 0x0aa7), .driver_info
= BTUSB_INTEL
},
320 /* Other Intel Bluetooth devices */
321 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
322 .driver_info
= BTUSB_IGNORE
},
324 /* Realtek Bluetooth devices */
325 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
326 .driver_info
= BTUSB_REALTEK
},
328 /* Additional Realtek 8723AE Bluetooth devices */
329 { USB_DEVICE(0x0930, 0x021d), .driver_info
= BTUSB_REALTEK
},
330 { USB_DEVICE(0x13d3, 0x3394), .driver_info
= BTUSB_REALTEK
},
332 /* Additional Realtek 8723BE Bluetooth devices */
333 { USB_DEVICE(0x0489, 0xe085), .driver_info
= BTUSB_REALTEK
},
334 { USB_DEVICE(0x0489, 0xe08b), .driver_info
= BTUSB_REALTEK
},
335 { USB_DEVICE(0x13d3, 0x3410), .driver_info
= BTUSB_REALTEK
},
336 { USB_DEVICE(0x13d3, 0x3416), .driver_info
= BTUSB_REALTEK
},
337 { USB_DEVICE(0x13d3, 0x3459), .driver_info
= BTUSB_REALTEK
},
339 /* Additional Realtek 8821AE Bluetooth devices */
340 { USB_DEVICE(0x0b05, 0x17dc), .driver_info
= BTUSB_REALTEK
},
341 { USB_DEVICE(0x13d3, 0x3414), .driver_info
= BTUSB_REALTEK
},
342 { USB_DEVICE(0x13d3, 0x3458), .driver_info
= BTUSB_REALTEK
},
343 { USB_DEVICE(0x13d3, 0x3461), .driver_info
= BTUSB_REALTEK
},
344 { USB_DEVICE(0x13d3, 0x3462), .driver_info
= BTUSB_REALTEK
},
346 /* Silicon Wave based devices */
347 { USB_DEVICE(0x0c10, 0x0000), .driver_info
= BTUSB_SWAVE
},
349 { } /* Terminating entry */
352 #define BTUSB_MAX_ISOC_FRAMES 10
354 #define BTUSB_INTR_RUNNING 0
355 #define BTUSB_BULK_RUNNING 1
356 #define BTUSB_ISOC_RUNNING 2
357 #define BTUSB_SUSPENDING 3
358 #define BTUSB_DID_ISO_RESUME 4
359 #define BTUSB_BOOTLOADER 5
360 #define BTUSB_DOWNLOADING 6
361 #define BTUSB_FIRMWARE_LOADED 7
362 #define BTUSB_FIRMWARE_FAILED 8
363 #define BTUSB_BOOTING 9
364 #define BTUSB_RESET_RESUME 10
365 #define BTUSB_DIAG_RUNNING 11
368 struct hci_dev
*hdev
;
369 struct usb_device
*udev
;
370 struct usb_interface
*intf
;
371 struct usb_interface
*isoc
;
372 struct usb_interface
*diag
;
376 struct work_struct work
;
377 struct work_struct waker
;
379 struct usb_anchor deferred
;
380 struct usb_anchor tx_anchor
;
384 struct usb_anchor intr_anchor
;
385 struct usb_anchor bulk_anchor
;
386 struct usb_anchor isoc_anchor
;
387 struct usb_anchor diag_anchor
;
390 struct sk_buff
*evt_skb
;
391 struct sk_buff
*acl_skb
;
392 struct sk_buff
*sco_skb
;
394 struct usb_endpoint_descriptor
*intr_ep
;
395 struct usb_endpoint_descriptor
*bulk_tx_ep
;
396 struct usb_endpoint_descriptor
*bulk_rx_ep
;
397 struct usb_endpoint_descriptor
*isoc_tx_ep
;
398 struct usb_endpoint_descriptor
*isoc_rx_ep
;
399 struct usb_endpoint_descriptor
*diag_tx_ep
;
400 struct usb_endpoint_descriptor
*diag_rx_ep
;
405 unsigned int sco_num
;
409 int (*recv_event
)(struct hci_dev
*hdev
, struct sk_buff
*skb
);
410 int (*recv_bulk
)(struct btusb_data
*data
, void *buffer
, int count
);
412 int (*setup_on_usb
)(struct hci_dev
*hdev
);
415 static inline void btusb_free_frags(struct btusb_data
*data
)
419 spin_lock_irqsave(&data
->rxlock
, flags
);
421 kfree_skb(data
->evt_skb
);
422 data
->evt_skb
= NULL
;
424 kfree_skb(data
->acl_skb
);
425 data
->acl_skb
= NULL
;
427 kfree_skb(data
->sco_skb
);
428 data
->sco_skb
= NULL
;
430 spin_unlock_irqrestore(&data
->rxlock
, flags
);
433 static int btusb_recv_intr(struct btusb_data
*data
, void *buffer
, int count
)
438 spin_lock(&data
->rxlock
);
445 skb
= bt_skb_alloc(HCI_MAX_EVENT_SIZE
, GFP_ATOMIC
);
451 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
452 hci_skb_expect(skb
) = HCI_EVENT_HDR_SIZE
;
455 len
= min_t(uint
, hci_skb_expect(skb
), count
);
456 memcpy(skb_put(skb
, len
), buffer
, len
);
460 hci_skb_expect(skb
) -= len
;
462 if (skb
->len
== HCI_EVENT_HDR_SIZE
) {
463 /* Complete event header */
464 hci_skb_expect(skb
) = hci_event_hdr(skb
)->plen
;
466 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
475 if (!hci_skb_expect(skb
)) {
477 data
->recv_event(data
->hdev
, skb
);
483 spin_unlock(&data
->rxlock
);
488 static int btusb_recv_bulk(struct btusb_data
*data
, void *buffer
, int count
)
493 spin_lock(&data
->rxlock
);
500 skb
= bt_skb_alloc(HCI_MAX_FRAME_SIZE
, GFP_ATOMIC
);
506 hci_skb_pkt_type(skb
) = HCI_ACLDATA_PKT
;
507 hci_skb_expect(skb
) = HCI_ACL_HDR_SIZE
;
510 len
= min_t(uint
, hci_skb_expect(skb
), count
);
511 memcpy(skb_put(skb
, len
), buffer
, len
);
515 hci_skb_expect(skb
) -= len
;
517 if (skb
->len
== HCI_ACL_HDR_SIZE
) {
518 __le16 dlen
= hci_acl_hdr(skb
)->dlen
;
520 /* Complete ACL header */
521 hci_skb_expect(skb
) = __le16_to_cpu(dlen
);
523 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
532 if (!hci_skb_expect(skb
)) {
534 hci_recv_frame(data
->hdev
, skb
);
540 spin_unlock(&data
->rxlock
);
545 static int btusb_recv_isoc(struct btusb_data
*data
, void *buffer
, int count
)
550 spin_lock(&data
->rxlock
);
557 skb
= bt_skb_alloc(HCI_MAX_SCO_SIZE
, GFP_ATOMIC
);
563 hci_skb_pkt_type(skb
) = HCI_SCODATA_PKT
;
564 hci_skb_expect(skb
) = HCI_SCO_HDR_SIZE
;
567 len
= min_t(uint
, hci_skb_expect(skb
), count
);
568 memcpy(skb_put(skb
, len
), buffer
, len
);
572 hci_skb_expect(skb
) -= len
;
574 if (skb
->len
== HCI_SCO_HDR_SIZE
) {
575 /* Complete SCO header */
576 hci_skb_expect(skb
) = hci_sco_hdr(skb
)->dlen
;
578 if (skb_tailroom(skb
) < hci_skb_expect(skb
)) {
587 if (!hci_skb_expect(skb
)) {
589 hci_recv_frame(data
->hdev
, skb
);
595 spin_unlock(&data
->rxlock
);
600 static void btusb_intr_complete(struct urb
*urb
)
602 struct hci_dev
*hdev
= urb
->context
;
603 struct btusb_data
*data
= hci_get_drvdata(hdev
);
606 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
609 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
612 if (urb
->status
== 0) {
613 hdev
->stat
.byte_rx
+= urb
->actual_length
;
615 if (btusb_recv_intr(data
, urb
->transfer_buffer
,
616 urb
->actual_length
) < 0) {
617 BT_ERR("%s corrupted event packet", hdev
->name
);
620 } else if (urb
->status
== -ENOENT
) {
621 /* Avoid suspend failed when usb_kill_urb */
625 if (!test_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
628 usb_mark_last_busy(data
->udev
);
629 usb_anchor_urb(urb
, &data
->intr_anchor
);
631 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
633 /* -EPERM: urb is being killed;
634 * -ENODEV: device got disconnected */
635 if (err
!= -EPERM
&& err
!= -ENODEV
)
636 BT_ERR("%s urb %p failed to resubmit (%d)",
637 hdev
->name
, urb
, -err
);
638 usb_unanchor_urb(urb
);
642 static int btusb_submit_intr_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
644 struct btusb_data
*data
= hci_get_drvdata(hdev
);
650 BT_DBG("%s", hdev
->name
);
655 urb
= usb_alloc_urb(0, mem_flags
);
659 size
= le16_to_cpu(data
->intr_ep
->wMaxPacketSize
);
661 buf
= kmalloc(size
, mem_flags
);
667 pipe
= usb_rcvintpipe(data
->udev
, data
->intr_ep
->bEndpointAddress
);
669 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
,
670 btusb_intr_complete
, hdev
, data
->intr_ep
->bInterval
);
672 urb
->transfer_flags
|= URB_FREE_BUFFER
;
674 usb_anchor_urb(urb
, &data
->intr_anchor
);
676 err
= usb_submit_urb(urb
, mem_flags
);
678 if (err
!= -EPERM
&& err
!= -ENODEV
)
679 BT_ERR("%s urb %p submission failed (%d)",
680 hdev
->name
, urb
, -err
);
681 usb_unanchor_urb(urb
);
689 static void btusb_bulk_complete(struct urb
*urb
)
691 struct hci_dev
*hdev
= urb
->context
;
692 struct btusb_data
*data
= hci_get_drvdata(hdev
);
695 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
698 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
701 if (urb
->status
== 0) {
702 hdev
->stat
.byte_rx
+= urb
->actual_length
;
704 if (data
->recv_bulk(data
, urb
->transfer_buffer
,
705 urb
->actual_length
) < 0) {
706 BT_ERR("%s corrupted ACL packet", hdev
->name
);
709 } else if (urb
->status
== -ENOENT
) {
710 /* Avoid suspend failed when usb_kill_urb */
714 if (!test_bit(BTUSB_BULK_RUNNING
, &data
->flags
))
717 usb_anchor_urb(urb
, &data
->bulk_anchor
);
718 usb_mark_last_busy(data
->udev
);
720 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
722 /* -EPERM: urb is being killed;
723 * -ENODEV: device got disconnected */
724 if (err
!= -EPERM
&& err
!= -ENODEV
)
725 BT_ERR("%s urb %p failed to resubmit (%d)",
726 hdev
->name
, urb
, -err
);
727 usb_unanchor_urb(urb
);
731 static int btusb_submit_bulk_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
733 struct btusb_data
*data
= hci_get_drvdata(hdev
);
737 int err
, size
= HCI_MAX_FRAME_SIZE
;
739 BT_DBG("%s", hdev
->name
);
741 if (!data
->bulk_rx_ep
)
744 urb
= usb_alloc_urb(0, mem_flags
);
748 buf
= kmalloc(size
, mem_flags
);
754 pipe
= usb_rcvbulkpipe(data
->udev
, data
->bulk_rx_ep
->bEndpointAddress
);
756 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
757 btusb_bulk_complete
, hdev
);
759 urb
->transfer_flags
|= URB_FREE_BUFFER
;
761 usb_mark_last_busy(data
->udev
);
762 usb_anchor_urb(urb
, &data
->bulk_anchor
);
764 err
= usb_submit_urb(urb
, mem_flags
);
766 if (err
!= -EPERM
&& err
!= -ENODEV
)
767 BT_ERR("%s urb %p submission failed (%d)",
768 hdev
->name
, urb
, -err
);
769 usb_unanchor_urb(urb
);
777 static void btusb_isoc_complete(struct urb
*urb
)
779 struct hci_dev
*hdev
= urb
->context
;
780 struct btusb_data
*data
= hci_get_drvdata(hdev
);
783 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
786 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
789 if (urb
->status
== 0) {
790 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
791 unsigned int offset
= urb
->iso_frame_desc
[i
].offset
;
792 unsigned int length
= urb
->iso_frame_desc
[i
].actual_length
;
794 if (urb
->iso_frame_desc
[i
].status
)
797 hdev
->stat
.byte_rx
+= length
;
799 if (btusb_recv_isoc(data
, urb
->transfer_buffer
+ offset
,
801 BT_ERR("%s corrupted SCO packet", hdev
->name
);
805 } else if (urb
->status
== -ENOENT
) {
806 /* Avoid suspend failed when usb_kill_urb */
810 if (!test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
))
813 usb_anchor_urb(urb
, &data
->isoc_anchor
);
815 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
817 /* -EPERM: urb is being killed;
818 * -ENODEV: device got disconnected */
819 if (err
!= -EPERM
&& err
!= -ENODEV
)
820 BT_ERR("%s urb %p failed to resubmit (%d)",
821 hdev
->name
, urb
, -err
);
822 usb_unanchor_urb(urb
);
826 static inline void __fill_isoc_descriptor(struct urb
*urb
, int len
, int mtu
)
830 BT_DBG("len %d mtu %d", len
, mtu
);
832 for (i
= 0; i
< BTUSB_MAX_ISOC_FRAMES
&& len
>= mtu
;
833 i
++, offset
+= mtu
, len
-= mtu
) {
834 urb
->iso_frame_desc
[i
].offset
= offset
;
835 urb
->iso_frame_desc
[i
].length
= mtu
;
838 if (len
&& i
< BTUSB_MAX_ISOC_FRAMES
) {
839 urb
->iso_frame_desc
[i
].offset
= offset
;
840 urb
->iso_frame_desc
[i
].length
= len
;
844 urb
->number_of_packets
= i
;
847 static int btusb_submit_isoc_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
849 struct btusb_data
*data
= hci_get_drvdata(hdev
);
855 BT_DBG("%s", hdev
->name
);
857 if (!data
->isoc_rx_ep
)
860 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, mem_flags
);
864 size
= le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
) *
865 BTUSB_MAX_ISOC_FRAMES
;
867 buf
= kmalloc(size
, mem_flags
);
873 pipe
= usb_rcvisocpipe(data
->udev
, data
->isoc_rx_ep
->bEndpointAddress
);
875 usb_fill_int_urb(urb
, data
->udev
, pipe
, buf
, size
, btusb_isoc_complete
,
876 hdev
, data
->isoc_rx_ep
->bInterval
);
878 urb
->transfer_flags
= URB_FREE_BUFFER
| URB_ISO_ASAP
;
880 __fill_isoc_descriptor(urb
, size
,
881 le16_to_cpu(data
->isoc_rx_ep
->wMaxPacketSize
));
883 usb_anchor_urb(urb
, &data
->isoc_anchor
);
885 err
= usb_submit_urb(urb
, mem_flags
);
887 if (err
!= -EPERM
&& err
!= -ENODEV
)
888 BT_ERR("%s urb %p submission failed (%d)",
889 hdev
->name
, urb
, -err
);
890 usb_unanchor_urb(urb
);
898 static void btusb_diag_complete(struct urb
*urb
)
900 struct hci_dev
*hdev
= urb
->context
;
901 struct btusb_data
*data
= hci_get_drvdata(hdev
);
904 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
907 if (urb
->status
== 0) {
910 skb
= bt_skb_alloc(urb
->actual_length
, GFP_ATOMIC
);
912 memcpy(skb_put(skb
, urb
->actual_length
),
913 urb
->transfer_buffer
, urb
->actual_length
);
914 hci_recv_diag(hdev
, skb
);
916 } else if (urb
->status
== -ENOENT
) {
917 /* Avoid suspend failed when usb_kill_urb */
921 if (!test_bit(BTUSB_DIAG_RUNNING
, &data
->flags
))
924 usb_anchor_urb(urb
, &data
->diag_anchor
);
925 usb_mark_last_busy(data
->udev
);
927 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
929 /* -EPERM: urb is being killed;
930 * -ENODEV: device got disconnected */
931 if (err
!= -EPERM
&& err
!= -ENODEV
)
932 BT_ERR("%s urb %p failed to resubmit (%d)",
933 hdev
->name
, urb
, -err
);
934 usb_unanchor_urb(urb
);
938 static int btusb_submit_diag_urb(struct hci_dev
*hdev
, gfp_t mem_flags
)
940 struct btusb_data
*data
= hci_get_drvdata(hdev
);
944 int err
, size
= HCI_MAX_FRAME_SIZE
;
946 BT_DBG("%s", hdev
->name
);
948 if (!data
->diag_rx_ep
)
951 urb
= usb_alloc_urb(0, mem_flags
);
955 buf
= kmalloc(size
, mem_flags
);
961 pipe
= usb_rcvbulkpipe(data
->udev
, data
->diag_rx_ep
->bEndpointAddress
);
963 usb_fill_bulk_urb(urb
, data
->udev
, pipe
, buf
, size
,
964 btusb_diag_complete
, hdev
);
966 urb
->transfer_flags
|= URB_FREE_BUFFER
;
968 usb_mark_last_busy(data
->udev
);
969 usb_anchor_urb(urb
, &data
->diag_anchor
);
971 err
= usb_submit_urb(urb
, mem_flags
);
973 if (err
!= -EPERM
&& err
!= -ENODEV
)
974 BT_ERR("%s urb %p submission failed (%d)",
975 hdev
->name
, urb
, -err
);
976 usb_unanchor_urb(urb
);
984 static void btusb_tx_complete(struct urb
*urb
)
986 struct sk_buff
*skb
= urb
->context
;
987 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
988 struct btusb_data
*data
= hci_get_drvdata(hdev
);
990 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
993 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
997 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1002 spin_lock(&data
->txlock
);
1003 data
->tx_in_flight
--;
1004 spin_unlock(&data
->txlock
);
1006 kfree(urb
->setup_packet
);
1011 static void btusb_isoc_tx_complete(struct urb
*urb
)
1013 struct sk_buff
*skb
= urb
->context
;
1014 struct hci_dev
*hdev
= (struct hci_dev
*)skb
->dev
;
1016 BT_DBG("%s urb %p status %d count %d", hdev
->name
, urb
, urb
->status
,
1017 urb
->actual_length
);
1019 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
1023 hdev
->stat
.byte_tx
+= urb
->transfer_buffer_length
;
1025 hdev
->stat
.err_tx
++;
1028 kfree(urb
->setup_packet
);
1033 static int btusb_open(struct hci_dev
*hdev
)
1035 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1038 BT_DBG("%s", hdev
->name
);
1040 /* Patching USB firmware files prior to starting any URBs of HCI path
1041 * It is more safe to use USB bulk channel for downloading USB patch
1043 if (data
->setup_on_usb
) {
1044 err
= data
->setup_on_usb(hdev
);
1049 err
= usb_autopm_get_interface(data
->intf
);
1053 data
->intf
->needs_remote_wakeup
= 1;
1055 if (test_and_set_bit(BTUSB_INTR_RUNNING
, &data
->flags
))
1058 err
= btusb_submit_intr_urb(hdev
, GFP_KERNEL
);
1062 err
= btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1064 usb_kill_anchored_urbs(&data
->intr_anchor
);
1068 set_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1069 btusb_submit_bulk_urb(hdev
, GFP_KERNEL
);
1072 if (!btusb_submit_diag_urb(hdev
, GFP_KERNEL
))
1073 set_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1077 usb_autopm_put_interface(data
->intf
);
1081 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1082 usb_autopm_put_interface(data
->intf
);
1086 static void btusb_stop_traffic(struct btusb_data
*data
)
1088 usb_kill_anchored_urbs(&data
->intr_anchor
);
1089 usb_kill_anchored_urbs(&data
->bulk_anchor
);
1090 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1091 usb_kill_anchored_urbs(&data
->diag_anchor
);
1094 static int btusb_close(struct hci_dev
*hdev
)
1096 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1099 BT_DBG("%s", hdev
->name
);
1101 cancel_work_sync(&data
->work
);
1102 cancel_work_sync(&data
->waker
);
1104 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1105 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
1106 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
1107 clear_bit(BTUSB_DIAG_RUNNING
, &data
->flags
);
1109 btusb_stop_traffic(data
);
1110 btusb_free_frags(data
);
1112 err
= usb_autopm_get_interface(data
->intf
);
1116 data
->intf
->needs_remote_wakeup
= 0;
1117 usb_autopm_put_interface(data
->intf
);
1120 usb_scuttle_anchored_urbs(&data
->deferred
);
1124 static int btusb_flush(struct hci_dev
*hdev
)
1126 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1128 BT_DBG("%s", hdev
->name
);
1130 usb_kill_anchored_urbs(&data
->tx_anchor
);
1131 btusb_free_frags(data
);
1136 static struct urb
*alloc_ctrl_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1138 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1139 struct usb_ctrlrequest
*dr
;
1143 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1145 return ERR_PTR(-ENOMEM
);
1147 dr
= kmalloc(sizeof(*dr
), GFP_KERNEL
);
1150 return ERR_PTR(-ENOMEM
);
1153 dr
->bRequestType
= data
->cmdreq_type
;
1154 dr
->bRequest
= data
->cmdreq
;
1157 dr
->wLength
= __cpu_to_le16(skb
->len
);
1159 pipe
= usb_sndctrlpipe(data
->udev
, 0x00);
1161 usb_fill_control_urb(urb
, data
->udev
, pipe
, (void *)dr
,
1162 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1164 skb
->dev
= (void *)hdev
;
1169 static struct urb
*alloc_bulk_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1171 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1175 if (!data
->bulk_tx_ep
)
1176 return ERR_PTR(-ENODEV
);
1178 urb
= usb_alloc_urb(0, GFP_KERNEL
);
1180 return ERR_PTR(-ENOMEM
);
1182 pipe
= usb_sndbulkpipe(data
->udev
, data
->bulk_tx_ep
->bEndpointAddress
);
1184 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
1185 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
1187 skb
->dev
= (void *)hdev
;
1192 static struct urb
*alloc_isoc_urb(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1194 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1198 if (!data
->isoc_tx_ep
)
1199 return ERR_PTR(-ENODEV
);
1201 urb
= usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES
, GFP_KERNEL
);
1203 return ERR_PTR(-ENOMEM
);
1205 pipe
= usb_sndisocpipe(data
->udev
, data
->isoc_tx_ep
->bEndpointAddress
);
1207 usb_fill_int_urb(urb
, data
->udev
, pipe
,
1208 skb
->data
, skb
->len
, btusb_isoc_tx_complete
,
1209 skb
, data
->isoc_tx_ep
->bInterval
);
1211 urb
->transfer_flags
= URB_ISO_ASAP
;
1213 __fill_isoc_descriptor(urb
, skb
->len
,
1214 le16_to_cpu(data
->isoc_tx_ep
->wMaxPacketSize
));
1216 skb
->dev
= (void *)hdev
;
1221 static int submit_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1223 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1226 usb_anchor_urb(urb
, &data
->tx_anchor
);
1228 err
= usb_submit_urb(urb
, GFP_KERNEL
);
1230 if (err
!= -EPERM
&& err
!= -ENODEV
)
1231 BT_ERR("%s urb %p submission failed (%d)",
1232 hdev
->name
, urb
, -err
);
1233 kfree(urb
->setup_packet
);
1234 usb_unanchor_urb(urb
);
1236 usb_mark_last_busy(data
->udev
);
1243 static int submit_or_queue_tx_urb(struct hci_dev
*hdev
, struct urb
*urb
)
1245 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1246 unsigned long flags
;
1249 spin_lock_irqsave(&data
->txlock
, flags
);
1250 suspending
= test_bit(BTUSB_SUSPENDING
, &data
->flags
);
1252 data
->tx_in_flight
++;
1253 spin_unlock_irqrestore(&data
->txlock
, flags
);
1256 return submit_tx_urb(hdev
, urb
);
1258 usb_anchor_urb(urb
, &data
->deferred
);
1259 schedule_work(&data
->waker
);
1265 static int btusb_send_frame(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1269 BT_DBG("%s", hdev
->name
);
1271 switch (hci_skb_pkt_type(skb
)) {
1272 case HCI_COMMAND_PKT
:
1273 urb
= alloc_ctrl_urb(hdev
, skb
);
1275 return PTR_ERR(urb
);
1277 hdev
->stat
.cmd_tx
++;
1278 return submit_or_queue_tx_urb(hdev
, urb
);
1280 case HCI_ACLDATA_PKT
:
1281 urb
= alloc_bulk_urb(hdev
, skb
);
1283 return PTR_ERR(urb
);
1285 hdev
->stat
.acl_tx
++;
1286 return submit_or_queue_tx_urb(hdev
, urb
);
1288 case HCI_SCODATA_PKT
:
1289 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1292 urb
= alloc_isoc_urb(hdev
, skb
);
1294 return PTR_ERR(urb
);
1296 hdev
->stat
.sco_tx
++;
1297 return submit_tx_urb(hdev
, urb
);
1303 static void btusb_notify(struct hci_dev
*hdev
, unsigned int evt
)
1305 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1307 BT_DBG("%s evt %d", hdev
->name
, evt
);
1309 if (hci_conn_num(hdev
, SCO_LINK
) != data
->sco_num
) {
1310 data
->sco_num
= hci_conn_num(hdev
, SCO_LINK
);
1311 schedule_work(&data
->work
);
1315 static inline int __set_isoc_interface(struct hci_dev
*hdev
, int altsetting
)
1317 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1318 struct usb_interface
*intf
= data
->isoc
;
1319 struct usb_endpoint_descriptor
*ep_desc
;
1325 err
= usb_set_interface(data
->udev
, 1, altsetting
);
1327 BT_ERR("%s setting interface failed (%d)", hdev
->name
, -err
);
1331 data
->isoc_altsetting
= altsetting
;
1333 data
->isoc_tx_ep
= NULL
;
1334 data
->isoc_rx_ep
= NULL
;
1336 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
1337 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
1339 if (!data
->isoc_tx_ep
&& usb_endpoint_is_isoc_out(ep_desc
)) {
1340 data
->isoc_tx_ep
= ep_desc
;
1344 if (!data
->isoc_rx_ep
&& usb_endpoint_is_isoc_in(ep_desc
)) {
1345 data
->isoc_rx_ep
= ep_desc
;
1350 if (!data
->isoc_tx_ep
|| !data
->isoc_rx_ep
) {
1351 BT_ERR("%s invalid SCO descriptors", hdev
->name
);
1358 static void btusb_work(struct work_struct
*work
)
1360 struct btusb_data
*data
= container_of(work
, struct btusb_data
, work
);
1361 struct hci_dev
*hdev
= data
->hdev
;
1365 if (data
->sco_num
> 0) {
1366 if (!test_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
)) {
1367 err
= usb_autopm_get_interface(data
->isoc
? data
->isoc
: data
->intf
);
1369 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1370 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1374 set_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
);
1377 if (hdev
->voice_setting
& 0x0020) {
1378 static const int alts
[3] = { 2, 4, 5 };
1380 new_alts
= alts
[data
->sco_num
- 1];
1382 new_alts
= data
->sco_num
;
1385 if (data
->isoc_altsetting
!= new_alts
) {
1386 unsigned long flags
;
1388 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1389 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1391 /* When isochronous alternate setting needs to be
1392 * changed, because SCO connection has been added
1393 * or removed, a packet fragment may be left in the
1394 * reassembling state. This could lead to wrongly
1395 * assembled fragments.
1397 * Clear outstanding fragment when selecting a new
1398 * alternate setting.
1400 spin_lock_irqsave(&data
->rxlock
, flags
);
1401 kfree_skb(data
->sco_skb
);
1402 data
->sco_skb
= NULL
;
1403 spin_unlock_irqrestore(&data
->rxlock
, flags
);
1405 if (__set_isoc_interface(hdev
, new_alts
) < 0)
1409 if (!test_and_set_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
1410 if (btusb_submit_isoc_urb(hdev
, GFP_KERNEL
) < 0)
1411 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1413 btusb_submit_isoc_urb(hdev
, GFP_KERNEL
);
1416 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
1417 usb_kill_anchored_urbs(&data
->isoc_anchor
);
1419 __set_isoc_interface(hdev
, 0);
1420 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME
, &data
->flags
))
1421 usb_autopm_put_interface(data
->isoc
? data
->isoc
: data
->intf
);
1425 static void btusb_waker(struct work_struct
*work
)
1427 struct btusb_data
*data
= container_of(work
, struct btusb_data
, waker
);
1430 err
= usb_autopm_get_interface(data
->intf
);
1434 usb_autopm_put_interface(data
->intf
);
1437 static int btusb_setup_bcm92035(struct hci_dev
*hdev
)
1439 struct sk_buff
*skb
;
1442 BT_DBG("%s", hdev
->name
);
1444 skb
= __hci_cmd_sync(hdev
, 0xfc3b, 1, &val
, HCI_INIT_TIMEOUT
);
1446 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb
));
1453 static int btusb_setup_csr(struct hci_dev
*hdev
)
1455 struct hci_rp_read_local_version
*rp
;
1456 struct sk_buff
*skb
;
1458 BT_DBG("%s", hdev
->name
);
1460 skb
= __hci_cmd_sync(hdev
, HCI_OP_READ_LOCAL_VERSION
, 0, NULL
,
1463 int err
= PTR_ERR(skb
);
1464 BT_ERR("%s: CSR: Local version failed (%d)", hdev
->name
, err
);
1468 if (skb
->len
!= sizeof(struct hci_rp_read_local_version
)) {
1469 BT_ERR("%s: CSR: Local version length mismatch", hdev
->name
);
1474 rp
= (struct hci_rp_read_local_version
*)skb
->data
;
1476 /* Detect controllers which aren't real CSR ones. */
1477 if (le16_to_cpu(rp
->manufacturer
) != 10 ||
1478 le16_to_cpu(rp
->lmp_subver
) == 0x0c5c) {
1479 /* Clear the reset quirk since this is not an actual
1480 * early Bluetooth 1.1 device from CSR.
1482 clear_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
1484 /* These fake CSR controllers have all a broken
1485 * stored link key handling and so just disable it.
1487 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
1495 static const struct firmware
*btusb_setup_intel_get_fw(struct hci_dev
*hdev
,
1496 struct intel_version
*ver
)
1498 const struct firmware
*fw
;
1502 snprintf(fwname
, sizeof(fwname
),
1503 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1504 ver
->hw_platform
, ver
->hw_variant
, ver
->hw_revision
,
1505 ver
->fw_variant
, ver
->fw_revision
, ver
->fw_build_num
,
1506 ver
->fw_build_ww
, ver
->fw_build_yy
);
1508 ret
= request_firmware(&fw
, fwname
, &hdev
->dev
);
1510 if (ret
== -EINVAL
) {
1511 BT_ERR("%s Intel firmware file request failed (%d)",
1516 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1517 hdev
->name
, fwname
, ret
);
1519 /* If the correct firmware patch file is not found, use the
1520 * default firmware patch file instead
1522 snprintf(fwname
, sizeof(fwname
), "intel/ibt-hw-%x.%x.bseq",
1523 ver
->hw_platform
, ver
->hw_variant
);
1524 if (request_firmware(&fw
, fwname
, &hdev
->dev
) < 0) {
1525 BT_ERR("%s failed to open default Intel fw file: %s",
1526 hdev
->name
, fwname
);
1531 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev
->name
, fwname
);
1536 static int btusb_setup_intel_patching(struct hci_dev
*hdev
,
1537 const struct firmware
*fw
,
1538 const u8
**fw_ptr
, int *disable_patch
)
1540 struct sk_buff
*skb
;
1541 struct hci_command_hdr
*cmd
;
1542 const u8
*cmd_param
;
1543 struct hci_event_hdr
*evt
= NULL
;
1544 const u8
*evt_param
= NULL
;
1545 int remain
= fw
->size
- (*fw_ptr
- fw
->data
);
1547 /* The first byte indicates the types of the patch command or event.
1548 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1549 * in the current firmware buffer doesn't start with 0x01 or
1550 * the size of remain buffer is smaller than HCI command header,
1551 * the firmware file is corrupted and it should stop the patching
1554 if (remain
> HCI_COMMAND_HDR_SIZE
&& *fw_ptr
[0] != 0x01) {
1555 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev
->name
);
1561 cmd
= (struct hci_command_hdr
*)(*fw_ptr
);
1562 *fw_ptr
+= sizeof(*cmd
);
1563 remain
-= sizeof(*cmd
);
1565 /* Ensure that the remain firmware data is long enough than the length
1566 * of command parameter. If not, the firmware file is corrupted.
1568 if (remain
< cmd
->plen
) {
1569 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev
->name
);
1573 /* If there is a command that loads a patch in the firmware
1574 * file, then enable the patch upon success, otherwise just
1575 * disable the manufacturer mode, for example patch activation
1576 * is not required when the default firmware patch file is used
1577 * because there are no patch data to load.
1579 if (*disable_patch
&& le16_to_cpu(cmd
->opcode
) == 0xfc8e)
1582 cmd_param
= *fw_ptr
;
1583 *fw_ptr
+= cmd
->plen
;
1584 remain
-= cmd
->plen
;
1586 /* This reads the expected events when the above command is sent to the
1587 * device. Some vendor commands expects more than one events, for
1588 * example command status event followed by vendor specific event.
1589 * For this case, it only keeps the last expected event. so the command
1590 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1591 * last expected event.
1593 while (remain
> HCI_EVENT_HDR_SIZE
&& *fw_ptr
[0] == 0x02) {
1597 evt
= (struct hci_event_hdr
*)(*fw_ptr
);
1598 *fw_ptr
+= sizeof(*evt
);
1599 remain
-= sizeof(*evt
);
1601 if (remain
< evt
->plen
) {
1602 BT_ERR("%s Intel fw corrupted: invalid evt len",
1607 evt_param
= *fw_ptr
;
1608 *fw_ptr
+= evt
->plen
;
1609 remain
-= evt
->plen
;
1612 /* Every HCI commands in the firmware file has its correspond event.
1613 * If event is not found or remain is smaller than zero, the firmware
1614 * file is corrupted.
1616 if (!evt
|| !evt_param
|| remain
< 0) {
1617 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev
->name
);
1621 skb
= __hci_cmd_sync_ev(hdev
, le16_to_cpu(cmd
->opcode
), cmd
->plen
,
1622 cmd_param
, evt
->evt
, HCI_INIT_TIMEOUT
);
1624 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1625 hdev
->name
, cmd
->opcode
, PTR_ERR(skb
));
1626 return PTR_ERR(skb
);
1629 /* It ensures that the returned event matches the event data read from
1630 * the firmware file. At fist, it checks the length and then
1631 * the contents of the event.
1633 if (skb
->len
!= evt
->plen
) {
1634 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev
->name
,
1635 le16_to_cpu(cmd
->opcode
));
1640 if (memcmp(skb
->data
, evt_param
, evt
->plen
)) {
1641 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1642 hdev
->name
, le16_to_cpu(cmd
->opcode
));
1651 static int btusb_setup_intel(struct hci_dev
*hdev
)
1653 struct sk_buff
*skb
;
1654 const struct firmware
*fw
;
1656 int disable_patch
, err
;
1657 struct intel_version ver
;
1659 BT_DBG("%s", hdev
->name
);
1661 /* The controller has a bug with the first HCI command sent to it
1662 * returning number of completed commands as zero. This would stall the
1663 * command processing in the Bluetooth core.
1665 * As a workaround, send HCI Reset command first which will reset the
1666 * number of completed commands and allow normal command processing
1669 skb
= __hci_cmd_sync(hdev
, HCI_OP_RESET
, 0, NULL
, HCI_INIT_TIMEOUT
);
1671 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1672 hdev
->name
, PTR_ERR(skb
));
1673 return PTR_ERR(skb
);
1677 /* Read Intel specific controller version first to allow selection of
1678 * which firmware file to load.
1680 * The returned information are hardware variant and revision plus
1681 * firmware variant, revision and build number.
1683 err
= btintel_read_version(hdev
, &ver
);
1687 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1688 hdev
->name
, ver
.hw_platform
, ver
.hw_variant
, ver
.hw_revision
,
1689 ver
.fw_variant
, ver
.fw_revision
, ver
.fw_build_num
,
1690 ver
.fw_build_ww
, ver
.fw_build_yy
, ver
.fw_patch_num
);
1692 /* fw_patch_num indicates the version of patch the device currently
1693 * have. If there is no patch data in the device, it is always 0x00.
1694 * So, if it is other than 0x00, no need to patch the device again.
1696 if (ver
.fw_patch_num
) {
1697 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1698 hdev
->name
, ver
.fw_patch_num
);
1702 /* Opens the firmware patch file based on the firmware version read
1703 * from the controller. If it fails to open the matching firmware
1704 * patch file, it tries to open the default firmware patch file.
1705 * If no patch file is found, allow the device to operate without
1708 fw
= btusb_setup_intel_get_fw(hdev
, &ver
);
1713 /* Enable the manufacturer mode of the controller.
1714 * Only while this mode is enabled, the driver can download the
1715 * firmware patch data and configuration parameters.
1717 err
= btintel_enter_mfg(hdev
);
1719 release_firmware(fw
);
1725 /* The firmware data file consists of list of Intel specific HCI
1726 * commands and its expected events. The first byte indicates the
1727 * type of the message, either HCI command or HCI event.
1729 * It reads the command and its expected event from the firmware file,
1730 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1731 * the returned event is compared with the event read from the firmware
1732 * file and it will continue until all the messages are downloaded to
1735 * Once the firmware patching is completed successfully,
1736 * the manufacturer mode is disabled with reset and activating the
1739 * If the firmware patching fails, the manufacturer mode is
1740 * disabled with reset and deactivating the patch.
1742 * If the default patch file is used, no reset is done when disabling
1745 while (fw
->size
> fw_ptr
- fw
->data
) {
1748 ret
= btusb_setup_intel_patching(hdev
, fw
, &fw_ptr
,
1751 goto exit_mfg_deactivate
;
1754 release_firmware(fw
);
1757 goto exit_mfg_disable
;
1759 /* Patching completed successfully and disable the manufacturer mode
1760 * with reset and activate the downloaded firmware patches.
1762 err
= btintel_exit_mfg(hdev
, true, true);
1766 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1772 /* Disable the manufacturer mode without reset */
1773 err
= btintel_exit_mfg(hdev
, false, false);
1777 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev
->name
);
1781 exit_mfg_deactivate
:
1782 release_firmware(fw
);
1784 /* Patching failed. Disable the manufacturer mode with reset and
1785 * deactivate the downloaded firmware patches.
1787 err
= btintel_exit_mfg(hdev
, true, false);
1791 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1795 /* Set the event mask for Intel specific vendor events. This enables
1796 * a few extra events that are useful during general operation.
1798 btintel_set_event_mask_mfg(hdev
, false);
1800 btintel_check_bdaddr(hdev
);
1804 static int inject_cmd_complete(struct hci_dev
*hdev
, __u16 opcode
)
1806 struct sk_buff
*skb
;
1807 struct hci_event_hdr
*hdr
;
1808 struct hci_ev_cmd_complete
*evt
;
1810 skb
= bt_skb_alloc(sizeof(*hdr
) + sizeof(*evt
) + 1, GFP_ATOMIC
);
1814 hdr
= (struct hci_event_hdr
*)skb_put(skb
, sizeof(*hdr
));
1815 hdr
->evt
= HCI_EV_CMD_COMPLETE
;
1816 hdr
->plen
= sizeof(*evt
) + 1;
1818 evt
= (struct hci_ev_cmd_complete
*)skb_put(skb
, sizeof(*evt
));
1820 evt
->opcode
= cpu_to_le16(opcode
);
1822 *skb_put(skb
, 1) = 0x00;
1824 hci_skb_pkt_type(skb
) = HCI_EVENT_PKT
;
1826 return hci_recv_frame(hdev
, skb
);
1829 static int btusb_recv_bulk_intel(struct btusb_data
*data
, void *buffer
,
1832 /* When the device is in bootloader mode, then it can send
1833 * events via the bulk endpoint. These events are treated the
1834 * same way as the ones received from the interrupt endpoint.
1836 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
))
1837 return btusb_recv_intr(data
, buffer
, count
);
1839 return btusb_recv_bulk(data
, buffer
, count
);
1842 static void btusb_intel_bootup(struct btusb_data
*data
, const void *ptr
,
1845 const struct intel_bootup
*evt
= ptr
;
1847 if (len
!= sizeof(*evt
))
1850 if (test_and_clear_bit(BTUSB_BOOTING
, &data
->flags
)) {
1851 smp_mb__after_atomic();
1852 wake_up_bit(&data
->flags
, BTUSB_BOOTING
);
1856 static void btusb_intel_secure_send_result(struct btusb_data
*data
,
1857 const void *ptr
, unsigned int len
)
1859 const struct intel_secure_send_result
*evt
= ptr
;
1861 if (len
!= sizeof(*evt
))
1865 set_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
);
1867 if (test_and_clear_bit(BTUSB_DOWNLOADING
, &data
->flags
) &&
1868 test_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
)) {
1869 smp_mb__after_atomic();
1870 wake_up_bit(&data
->flags
, BTUSB_DOWNLOADING
);
1874 static int btusb_recv_event_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1876 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1878 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1879 struct hci_event_hdr
*hdr
= (void *)skb
->data
;
1881 if (skb
->len
> HCI_EVENT_HDR_SIZE
&& hdr
->evt
== 0xff &&
1883 const void *ptr
= skb
->data
+ HCI_EVENT_HDR_SIZE
+ 1;
1884 unsigned int len
= skb
->len
- HCI_EVENT_HDR_SIZE
- 1;
1886 switch (skb
->data
[2]) {
1888 /* When switching to the operational firmware
1889 * the device sends a vendor specific event
1890 * indicating that the bootup completed.
1892 btusb_intel_bootup(data
, ptr
, len
);
1895 /* When the firmware loading completes the
1896 * device sends out a vendor specific event
1897 * indicating the result of the firmware
1900 btusb_intel_secure_send_result(data
, ptr
, len
);
1906 return hci_recv_frame(hdev
, skb
);
1909 static int btusb_send_frame_intel(struct hci_dev
*hdev
, struct sk_buff
*skb
)
1911 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1914 BT_DBG("%s", hdev
->name
);
1916 switch (hci_skb_pkt_type(skb
)) {
1917 case HCI_COMMAND_PKT
:
1918 if (test_bit(BTUSB_BOOTLOADER
, &data
->flags
)) {
1919 struct hci_command_hdr
*cmd
= (void *)skb
->data
;
1920 __u16 opcode
= le16_to_cpu(cmd
->opcode
);
1922 /* When in bootloader mode and the command 0xfc09
1923 * is received, it needs to be send down the
1924 * bulk endpoint. So allocate a bulk URB instead.
1926 if (opcode
== 0xfc09)
1927 urb
= alloc_bulk_urb(hdev
, skb
);
1929 urb
= alloc_ctrl_urb(hdev
, skb
);
1931 /* When the 0xfc01 command is issued to boot into
1932 * the operational firmware, it will actually not
1933 * send a command complete event. To keep the flow
1934 * control working inject that event here.
1936 if (opcode
== 0xfc01)
1937 inject_cmd_complete(hdev
, opcode
);
1939 urb
= alloc_ctrl_urb(hdev
, skb
);
1942 return PTR_ERR(urb
);
1944 hdev
->stat
.cmd_tx
++;
1945 return submit_or_queue_tx_urb(hdev
, urb
);
1947 case HCI_ACLDATA_PKT
:
1948 urb
= alloc_bulk_urb(hdev
, skb
);
1950 return PTR_ERR(urb
);
1952 hdev
->stat
.acl_tx
++;
1953 return submit_or_queue_tx_urb(hdev
, urb
);
1955 case HCI_SCODATA_PKT
:
1956 if (hci_conn_num(hdev
, SCO_LINK
) < 1)
1959 urb
= alloc_isoc_urb(hdev
, skb
);
1961 return PTR_ERR(urb
);
1963 hdev
->stat
.sco_tx
++;
1964 return submit_tx_urb(hdev
, urb
);
1970 static int btusb_setup_intel_new(struct hci_dev
*hdev
)
1972 static const u8 reset_param
[] = { 0x00, 0x01, 0x00, 0x01,
1973 0x00, 0x08, 0x04, 0x00 };
1974 struct btusb_data
*data
= hci_get_drvdata(hdev
);
1975 struct sk_buff
*skb
;
1976 struct intel_version ver
;
1977 struct intel_boot_params
*params
;
1978 const struct firmware
*fw
;
1982 ktime_t calltime
, delta
, rettime
;
1983 unsigned long long duration
;
1986 BT_DBG("%s", hdev
->name
);
1988 calltime
= ktime_get();
1990 /* Read the Intel version information to determine if the device
1991 * is in bootloader mode or if it already has operational firmware
1994 err
= btintel_read_version(hdev
, &ver
);
1998 /* The hardware platform number has a fixed value of 0x37 and
1999 * for now only accept this single value.
2001 if (ver
.hw_platform
!= 0x37) {
2002 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2003 hdev
->name
, ver
.hw_platform
);
2007 /* At the moment the iBT 3.0 hardware variants 0x0b (LnP/SfP)
2008 * and 0x0c (WsP) are supported by this firmware loading method.
2010 * This check has been put in place to ensure correct forward
2011 * compatibility options when newer hardware variants come along.
2013 if (ver
.hw_variant
!= 0x0b && ver
.hw_variant
!= 0x0c) {
2014 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2015 hdev
->name
, ver
.hw_variant
);
2019 btintel_version_info(hdev
, &ver
);
2021 /* The firmware variant determines if the device is in bootloader
2022 * mode or is running operational firmware. The value 0x06 identifies
2023 * the bootloader and the value 0x23 identifies the operational
2026 * When the operational firmware is already present, then only
2027 * the check for valid Bluetooth device address is needed. This
2028 * determines if the device will be added as configured or
2029 * unconfigured controller.
2031 * It is not possible to use the Secure Boot Parameters in this
2032 * case since that command is only available in bootloader mode.
2034 if (ver
.fw_variant
== 0x23) {
2035 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2036 btintel_check_bdaddr(hdev
);
2040 /* If the device is not in bootloader mode, then the only possible
2041 * choice is to return an error and abort the device initialization.
2043 if (ver
.fw_variant
!= 0x06) {
2044 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2045 hdev
->name
, ver
.fw_variant
);
2049 /* Read the secure boot parameters to identify the operating
2050 * details of the bootloader.
2052 skb
= __hci_cmd_sync(hdev
, 0xfc0d, 0, NULL
, HCI_INIT_TIMEOUT
);
2054 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2055 hdev
->name
, PTR_ERR(skb
));
2056 return PTR_ERR(skb
);
2059 if (skb
->len
!= sizeof(*params
)) {
2060 BT_ERR("%s: Intel boot parameters size mismatch", hdev
->name
);
2065 params
= (struct intel_boot_params
*)skb
->data
;
2067 BT_INFO("%s: Device revision is %u", hdev
->name
,
2068 le16_to_cpu(params
->dev_revid
));
2070 BT_INFO("%s: Secure boot is %s", hdev
->name
,
2071 params
->secure_boot
? "enabled" : "disabled");
2073 BT_INFO("%s: OTP lock is %s", hdev
->name
,
2074 params
->otp_lock
? "enabled" : "disabled");
2076 BT_INFO("%s: API lock is %s", hdev
->name
,
2077 params
->api_lock
? "enabled" : "disabled");
2079 BT_INFO("%s: Debug lock is %s", hdev
->name
,
2080 params
->debug_lock
? "enabled" : "disabled");
2082 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev
->name
,
2083 params
->min_fw_build_nn
, params
->min_fw_build_cw
,
2084 2000 + params
->min_fw_build_yy
);
2086 /* It is required that every single firmware fragment is acknowledged
2087 * with a command complete event. If the boot parameters indicate
2088 * that this bootloader does not send them, then abort the setup.
2090 if (params
->limited_cce
!= 0x00) {
2091 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2092 hdev
->name
, params
->limited_cce
);
2097 /* If the OTP has no valid Bluetooth device address, then there will
2098 * also be no valid address for the operational firmware.
2100 if (!bacmp(¶ms
->otp_bdaddr
, BDADDR_ANY
)) {
2101 BT_INFO("%s: No device address configured", hdev
->name
);
2102 set_bit(HCI_QUIRK_INVALID_BDADDR
, &hdev
->quirks
);
2105 /* With this Intel bootloader only the hardware variant and device
2106 * revision information are used to select the right firmware.
2108 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2110 * Currently the supported hardware variants are:
2111 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2112 * 12 (0x0c) for iBT3.5 (WsP)
2114 snprintf(fwname
, sizeof(fwname
), "intel/ibt-%u-%u.sfi",
2115 le16_to_cpu(ver
.hw_variant
),
2116 le16_to_cpu(params
->dev_revid
));
2118 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2120 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2126 BT_INFO("%s: Found device firmware: %s", hdev
->name
, fwname
);
2128 /* Save the DDC file name for later use to apply once the firmware
2129 * downloading is done.
2131 snprintf(fwname
, sizeof(fwname
), "intel/ibt-%u-%u.ddc",
2132 le16_to_cpu(ver
.hw_variant
),
2133 le16_to_cpu(params
->dev_revid
));
2137 if (fw
->size
< 644) {
2138 BT_ERR("%s: Invalid size of firmware file (%zu)",
2139 hdev
->name
, fw
->size
);
2144 set_bit(BTUSB_DOWNLOADING
, &data
->flags
);
2146 /* Start the firmware download transaction with the Init fragment
2147 * represented by the 128 bytes of CSS header.
2149 err
= btintel_secure_send(hdev
, 0x00, 128, fw
->data
);
2151 BT_ERR("%s: Failed to send firmware header (%d)",
2156 /* Send the 256 bytes of public key information from the firmware
2157 * as the PKey fragment.
2159 err
= btintel_secure_send(hdev
, 0x03, 256, fw
->data
+ 128);
2161 BT_ERR("%s: Failed to send firmware public key (%d)",
2166 /* Send the 256 bytes of signature information from the firmware
2167 * as the Sign fragment.
2169 err
= btintel_secure_send(hdev
, 0x02, 256, fw
->data
+ 388);
2171 BT_ERR("%s: Failed to send firmware signature (%d)",
2176 fw_ptr
= fw
->data
+ 644;
2179 while (fw_ptr
- fw
->data
< fw
->size
) {
2180 struct hci_command_hdr
*cmd
= (void *)(fw_ptr
+ frag_len
);
2182 frag_len
+= sizeof(*cmd
) + cmd
->plen
;
2184 /* The parameter length of the secure send command requires
2185 * a 4 byte alignment. It happens so that the firmware file
2186 * contains proper Intel_NOP commands to align the fragments
2189 * Send set of commands with 4 byte alignment from the
2190 * firmware data buffer as a single Data fragement.
2192 if (!(frag_len
% 4)) {
2193 err
= btintel_secure_send(hdev
, 0x01, frag_len
, fw_ptr
);
2195 BT_ERR("%s: Failed to send firmware data (%d)",
2205 set_bit(BTUSB_FIRMWARE_LOADED
, &data
->flags
);
2207 BT_INFO("%s: Waiting for firmware download to complete", hdev
->name
);
2209 /* Before switching the device into operational mode and with that
2210 * booting the loaded firmware, wait for the bootloader notification
2211 * that all fragments have been successfully received.
2213 * When the event processing receives the notification, then the
2214 * BTUSB_DOWNLOADING flag will be cleared.
2216 * The firmware loading should not take longer than 5 seconds
2217 * and thus just timeout if that happens and fail the setup
2220 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_DOWNLOADING
,
2222 msecs_to_jiffies(5000));
2224 BT_ERR("%s: Firmware loading interrupted", hdev
->name
);
2230 BT_ERR("%s: Firmware loading timeout", hdev
->name
);
2235 if (test_bit(BTUSB_FIRMWARE_FAILED
, &data
->flags
)) {
2236 BT_ERR("%s: Firmware loading failed", hdev
->name
);
2241 rettime
= ktime_get();
2242 delta
= ktime_sub(rettime
, calltime
);
2243 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2245 BT_INFO("%s: Firmware loaded in %llu usecs", hdev
->name
, duration
);
2248 release_firmware(fw
);
2253 calltime
= ktime_get();
2255 set_bit(BTUSB_BOOTING
, &data
->flags
);
2257 skb
= __hci_cmd_sync(hdev
, 0xfc01, sizeof(reset_param
), reset_param
,
2260 return PTR_ERR(skb
);
2264 /* The bootloader will not indicate when the device is ready. This
2265 * is done by the operational firmware sending bootup notification.
2267 * Booting into operational firmware should not take longer than
2268 * 1 second. However if that happens, then just fail the setup
2269 * since something went wrong.
2271 BT_INFO("%s: Waiting for device to boot", hdev
->name
);
2273 err
= wait_on_bit_timeout(&data
->flags
, BTUSB_BOOTING
,
2275 msecs_to_jiffies(1000));
2278 BT_ERR("%s: Device boot interrupted", hdev
->name
);
2283 BT_ERR("%s: Device boot timeout", hdev
->name
);
2287 rettime
= ktime_get();
2288 delta
= ktime_sub(rettime
, calltime
);
2289 duration
= (unsigned long long) ktime_to_ns(delta
) >> 10;
2291 BT_INFO("%s: Device booted in %llu usecs", hdev
->name
, duration
);
2293 clear_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2295 /* Once the device is running in operational mode, it needs to apply
2296 * the device configuration (DDC) parameters.
2298 * The device can work without DDC parameters, so even if it fails
2299 * to load the file, no need to fail the setup.
2301 btintel_load_ddc_config(hdev
, fwname
);
2303 /* Set the event mask for Intel specific vendor events. This enables
2304 * a few extra events that are useful during general operation. It
2305 * does not enable any debugging related events.
2307 * The device will function correctly without these events enabled
2308 * and thus no need to fail the setup.
2310 btintel_set_event_mask(hdev
, false);
2315 static int btusb_shutdown_intel(struct hci_dev
*hdev
)
2317 struct sk_buff
*skb
;
2320 /* Some platforms have an issue with BT LED when the interface is
2321 * down or BT radio is turned off, which takes 5 seconds to BT LED
2322 * goes off. This command turns off the BT LED immediately.
2324 skb
= __hci_cmd_sync(hdev
, 0xfc3f, 0, NULL
, HCI_INIT_TIMEOUT
);
2327 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2336 static int btusb_set_bdaddr_marvell(struct hci_dev
*hdev
,
2337 const bdaddr_t
*bdaddr
)
2339 struct sk_buff
*skb
;
2344 buf
[1] = sizeof(bdaddr_t
);
2345 memcpy(buf
+ 2, bdaddr
, sizeof(bdaddr_t
));
2347 skb
= __hci_cmd_sync(hdev
, 0xfc22, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2350 BT_ERR("%s: changing Marvell device address failed (%ld)",
2359 static int btusb_set_bdaddr_ath3012(struct hci_dev
*hdev
,
2360 const bdaddr_t
*bdaddr
)
2362 struct sk_buff
*skb
;
2369 buf
[3] = sizeof(bdaddr_t
);
2370 memcpy(buf
+ 4, bdaddr
, sizeof(bdaddr_t
));
2372 skb
= __hci_cmd_sync(hdev
, 0xfc0b, sizeof(buf
), buf
, HCI_INIT_TIMEOUT
);
2375 BT_ERR("%s: Change address command failed (%ld)",
2384 #define QCA_DFU_PACKET_LEN 4096
2386 #define QCA_GET_TARGET_VERSION 0x09
2387 #define QCA_CHECK_STATUS 0x05
2388 #define QCA_DFU_DOWNLOAD 0x01
2390 #define QCA_SYSCFG_UPDATED 0x40
2391 #define QCA_PATCH_UPDATED 0x80
2392 #define QCA_DFU_TIMEOUT 3000
2394 struct qca_version
{
2396 __le32 patch_version
;
2402 struct qca_rampatch_version
{
2404 __le16 patch_version
;
2407 struct qca_device_info
{
2409 u8 rampatch_hdr
; /* length of header in rampatch */
2410 u8 nvm_hdr
; /* length of header in NVM */
2411 u8 ver_offset
; /* offset of version structure in rampatch */
2414 static const struct qca_device_info qca_devices_table
[] = {
2415 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2416 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2417 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2418 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2419 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2420 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2423 static int btusb_qca_send_vendor_req(struct hci_dev
*hdev
, u8 request
,
2424 void *data
, u16 size
)
2426 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2427 struct usb_device
*udev
= btdata
->udev
;
2431 buf
= kmalloc(size
, GFP_KERNEL
);
2435 /* Found some of USB hosts have IOT issues with ours so that we should
2436 * not wait until HCI layer is ready.
2438 pipe
= usb_rcvctrlpipe(udev
, 0);
2439 err
= usb_control_msg(udev
, pipe
, request
, USB_TYPE_VENDOR
| USB_DIR_IN
,
2440 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2442 BT_ERR("%s: Failed to access otp area (%d)", hdev
->name
, err
);
2446 memcpy(data
, buf
, size
);
2454 static int btusb_setup_qca_download_fw(struct hci_dev
*hdev
,
2455 const struct firmware
*firmware
,
2458 struct btusb_data
*btdata
= hci_get_drvdata(hdev
);
2459 struct usb_device
*udev
= btdata
->udev
;
2460 size_t count
, size
, sent
= 0;
2464 buf
= kmalloc(QCA_DFU_PACKET_LEN
, GFP_KERNEL
);
2468 count
= firmware
->size
;
2470 size
= min_t(size_t, count
, hdr_size
);
2471 memcpy(buf
, firmware
->data
, size
);
2473 /* USB patches should go down to controller through USB path
2474 * because binary format fits to go down through USB channel.
2475 * USB control path is for patching headers and USB bulk is for
2478 pipe
= usb_sndctrlpipe(udev
, 0);
2479 err
= usb_control_msg(udev
, pipe
, QCA_DFU_DOWNLOAD
, USB_TYPE_VENDOR
,
2480 0, 0, buf
, size
, USB_CTRL_SET_TIMEOUT
);
2482 BT_ERR("%s: Failed to send headers (%d)", hdev
->name
, err
);
2490 size
= min_t(size_t, count
, QCA_DFU_PACKET_LEN
);
2492 memcpy(buf
, firmware
->data
+ sent
, size
);
2494 pipe
= usb_sndbulkpipe(udev
, 0x02);
2495 err
= usb_bulk_msg(udev
, pipe
, buf
, size
, &len
,
2498 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2499 hdev
->name
, sent
, firmware
->size
, err
);
2504 BT_ERR("%s: Failed to get bulk buffer", hdev
->name
);
2518 static int btusb_setup_qca_load_rampatch(struct hci_dev
*hdev
,
2519 struct qca_version
*ver
,
2520 const struct qca_device_info
*info
)
2522 struct qca_rampatch_version
*rver
;
2523 const struct firmware
*fw
;
2524 u32 ver_rom
, ver_patch
;
2525 u16 rver_rom
, rver_patch
;
2529 ver_rom
= le32_to_cpu(ver
->rom_version
);
2530 ver_patch
= le32_to_cpu(ver
->patch_version
);
2532 snprintf(fwname
, sizeof(fwname
), "qca/rampatch_usb_%08x.bin", ver_rom
);
2534 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2536 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2537 hdev
->name
, fwname
, err
);
2541 BT_INFO("%s: using rampatch file: %s", hdev
->name
, fwname
);
2543 rver
= (struct qca_rampatch_version
*)(fw
->data
+ info
->ver_offset
);
2544 rver_rom
= le16_to_cpu(rver
->rom_version
);
2545 rver_patch
= le16_to_cpu(rver
->patch_version
);
2547 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2548 "build 0x%x", hdev
->name
, rver_rom
, rver_patch
, ver_rom
,
2551 if (rver_rom
!= ver_rom
|| rver_patch
<= ver_patch
) {
2552 BT_ERR("%s: rampatch file version did not match with firmware",
2558 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->rampatch_hdr
);
2561 release_firmware(fw
);
2566 static int btusb_setup_qca_load_nvm(struct hci_dev
*hdev
,
2567 struct qca_version
*ver
,
2568 const struct qca_device_info
*info
)
2570 const struct firmware
*fw
;
2574 snprintf(fwname
, sizeof(fwname
), "qca/nvm_usb_%08x.bin",
2575 le32_to_cpu(ver
->rom_version
));
2577 err
= request_firmware(&fw
, fwname
, &hdev
->dev
);
2579 BT_ERR("%s: failed to request NVM file: %s (%d)",
2580 hdev
->name
, fwname
, err
);
2584 BT_INFO("%s: using NVM file: %s", hdev
->name
, fwname
);
2586 err
= btusb_setup_qca_download_fw(hdev
, fw
, info
->nvm_hdr
);
2588 release_firmware(fw
);
2593 static int btusb_setup_qca(struct hci_dev
*hdev
)
2595 const struct qca_device_info
*info
= NULL
;
2596 struct qca_version ver
;
2601 err
= btusb_qca_send_vendor_req(hdev
, QCA_GET_TARGET_VERSION
, &ver
,
2606 ver_rom
= le32_to_cpu(ver
.rom_version
);
2607 for (i
= 0; i
< ARRAY_SIZE(qca_devices_table
); i
++) {
2608 if (ver_rom
== qca_devices_table
[i
].rom_version
)
2609 info
= &qca_devices_table
[i
];
2612 BT_ERR("%s: don't support firmware rome 0x%x", hdev
->name
,
2617 err
= btusb_qca_send_vendor_req(hdev
, QCA_CHECK_STATUS
, &status
,
2622 if (!(status
& QCA_PATCH_UPDATED
)) {
2623 err
= btusb_setup_qca_load_rampatch(hdev
, &ver
, info
);
2628 if (!(status
& QCA_SYSCFG_UPDATED
)) {
2629 err
= btusb_setup_qca_load_nvm(hdev
, &ver
, info
);
2637 #ifdef CONFIG_BT_HCIBTUSB_BCM
2638 static inline int __set_diag_interface(struct hci_dev
*hdev
)
2640 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2641 struct usb_interface
*intf
= data
->diag
;
2647 data
->diag_tx_ep
= NULL
;
2648 data
->diag_rx_ep
= NULL
;
2650 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2651 struct usb_endpoint_descriptor
*ep_desc
;
2653 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2655 if (!data
->diag_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2656 data
->diag_tx_ep
= ep_desc
;
2660 if (!data
->diag_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2661 data
->diag_rx_ep
= ep_desc
;
2666 if (!data
->diag_tx_ep
|| !data
->diag_rx_ep
) {
2667 BT_ERR("%s invalid diagnostic descriptors", hdev
->name
);
2674 static struct urb
*alloc_diag_urb(struct hci_dev
*hdev
, bool enable
)
2676 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2677 struct sk_buff
*skb
;
2681 if (!data
->diag_tx_ep
)
2682 return ERR_PTR(-ENODEV
);
2684 urb
= usb_alloc_urb(0, GFP_KERNEL
);
2686 return ERR_PTR(-ENOMEM
);
2688 skb
= bt_skb_alloc(2, GFP_KERNEL
);
2691 return ERR_PTR(-ENOMEM
);
2694 *skb_put(skb
, 1) = 0xf0;
2695 *skb_put(skb
, 1) = enable
;
2697 pipe
= usb_sndbulkpipe(data
->udev
, data
->diag_tx_ep
->bEndpointAddress
);
2699 usb_fill_bulk_urb(urb
, data
->udev
, pipe
,
2700 skb
->data
, skb
->len
, btusb_tx_complete
, skb
);
2702 skb
->dev
= (void *)hdev
;
2707 static int btusb_bcm_set_diag(struct hci_dev
*hdev
, bool enable
)
2709 struct btusb_data
*data
= hci_get_drvdata(hdev
);
2715 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
2718 urb
= alloc_diag_urb(hdev
, enable
);
2720 return PTR_ERR(urb
);
2722 return submit_or_queue_tx_urb(hdev
, urb
);
2726 static int btusb_probe(struct usb_interface
*intf
,
2727 const struct usb_device_id
*id
)
2729 struct usb_endpoint_descriptor
*ep_desc
;
2730 struct btusb_data
*data
;
2731 struct hci_dev
*hdev
;
2732 unsigned ifnum_base
;
2735 BT_DBG("intf %p id %p", intf
, id
);
2737 /* interface numbers are hardcoded in the spec */
2738 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 0) {
2739 if (!(id
->driver_info
& BTUSB_IFNUM_2
))
2741 if (intf
->cur_altsetting
->desc
.bInterfaceNumber
!= 2)
2745 ifnum_base
= intf
->cur_altsetting
->desc
.bInterfaceNumber
;
2747 if (!id
->driver_info
) {
2748 const struct usb_device_id
*match
;
2750 match
= usb_match_id(intf
, blacklist_table
);
2755 if (id
->driver_info
== BTUSB_IGNORE
)
2758 if (id
->driver_info
& BTUSB_ATH3012
) {
2759 struct usb_device
*udev
= interface_to_usbdev(intf
);
2761 /* Old firmware would otherwise let ath3k driver load
2762 * patch and sysconfig files */
2763 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) <= 0x0001)
2767 data
= devm_kzalloc(&intf
->dev
, sizeof(*data
), GFP_KERNEL
);
2771 for (i
= 0; i
< intf
->cur_altsetting
->desc
.bNumEndpoints
; i
++) {
2772 ep_desc
= &intf
->cur_altsetting
->endpoint
[i
].desc
;
2774 if (!data
->intr_ep
&& usb_endpoint_is_int_in(ep_desc
)) {
2775 data
->intr_ep
= ep_desc
;
2779 if (!data
->bulk_tx_ep
&& usb_endpoint_is_bulk_out(ep_desc
)) {
2780 data
->bulk_tx_ep
= ep_desc
;
2784 if (!data
->bulk_rx_ep
&& usb_endpoint_is_bulk_in(ep_desc
)) {
2785 data
->bulk_rx_ep
= ep_desc
;
2790 if (!data
->intr_ep
|| !data
->bulk_tx_ep
|| !data
->bulk_rx_ep
)
2793 if (id
->driver_info
& BTUSB_AMP
) {
2794 data
->cmdreq_type
= USB_TYPE_CLASS
| 0x01;
2795 data
->cmdreq
= 0x2b;
2797 data
->cmdreq_type
= USB_TYPE_CLASS
;
2798 data
->cmdreq
= 0x00;
2801 data
->udev
= interface_to_usbdev(intf
);
2804 INIT_WORK(&data
->work
, btusb_work
);
2805 INIT_WORK(&data
->waker
, btusb_waker
);
2806 init_usb_anchor(&data
->deferred
);
2807 init_usb_anchor(&data
->tx_anchor
);
2808 spin_lock_init(&data
->txlock
);
2810 init_usb_anchor(&data
->intr_anchor
);
2811 init_usb_anchor(&data
->bulk_anchor
);
2812 init_usb_anchor(&data
->isoc_anchor
);
2813 init_usb_anchor(&data
->diag_anchor
);
2814 spin_lock_init(&data
->rxlock
);
2816 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2817 data
->recv_event
= btusb_recv_event_intel
;
2818 data
->recv_bulk
= btusb_recv_bulk_intel
;
2819 set_bit(BTUSB_BOOTLOADER
, &data
->flags
);
2821 data
->recv_event
= hci_recv_frame
;
2822 data
->recv_bulk
= btusb_recv_bulk
;
2825 hdev
= hci_alloc_dev();
2829 hdev
->bus
= HCI_USB
;
2830 hci_set_drvdata(hdev
, data
);
2832 if (id
->driver_info
& BTUSB_AMP
)
2833 hdev
->dev_type
= HCI_AMP
;
2835 hdev
->dev_type
= HCI_PRIMARY
;
2839 SET_HCIDEV_DEV(hdev
, &intf
->dev
);
2841 hdev
->open
= btusb_open
;
2842 hdev
->close
= btusb_close
;
2843 hdev
->flush
= btusb_flush
;
2844 hdev
->send
= btusb_send_frame
;
2845 hdev
->notify
= btusb_notify
;
2847 if (id
->driver_info
& BTUSB_BCM2045
)
2848 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY
, &hdev
->quirks
);
2850 if (id
->driver_info
& BTUSB_BCM92035
)
2851 hdev
->setup
= btusb_setup_bcm92035
;
2853 #ifdef CONFIG_BT_HCIBTUSB_BCM
2854 if (id
->driver_info
& BTUSB_BCM_PATCHRAM
) {
2855 hdev
->manufacturer
= 15;
2856 hdev
->setup
= btbcm_setup_patchram
;
2857 hdev
->set_diag
= btusb_bcm_set_diag
;
2858 hdev
->set_bdaddr
= btbcm_set_bdaddr
;
2860 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2861 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2864 if (id
->driver_info
& BTUSB_BCM_APPLE
) {
2865 hdev
->manufacturer
= 15;
2866 hdev
->setup
= btbcm_setup_apple
;
2867 hdev
->set_diag
= btusb_bcm_set_diag
;
2869 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2870 data
->diag
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 2);
2874 if (id
->driver_info
& BTUSB_INTEL
) {
2875 hdev
->manufacturer
= 2;
2876 hdev
->setup
= btusb_setup_intel
;
2877 hdev
->shutdown
= btusb_shutdown_intel
;
2878 hdev
->set_diag
= btintel_set_diag_mfg
;
2879 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2880 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2881 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2882 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2885 if (id
->driver_info
& BTUSB_INTEL_NEW
) {
2886 hdev
->manufacturer
= 2;
2887 hdev
->send
= btusb_send_frame_intel
;
2888 hdev
->setup
= btusb_setup_intel_new
;
2889 hdev
->hw_error
= btintel_hw_error
;
2890 hdev
->set_diag
= btintel_set_diag
;
2891 hdev
->set_bdaddr
= btintel_set_bdaddr
;
2892 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2893 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG
, &hdev
->quirks
);
2896 if (id
->driver_info
& BTUSB_MARVELL
)
2897 hdev
->set_bdaddr
= btusb_set_bdaddr_marvell
;
2899 if (id
->driver_info
& BTUSB_SWAVE
) {
2900 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE
, &hdev
->quirks
);
2901 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS
, &hdev
->quirks
);
2904 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2905 hdev
->manufacturer
= 2;
2906 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2909 if (id
->driver_info
& BTUSB_ATH3012
) {
2910 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2911 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2912 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER
, &hdev
->quirks
);
2915 if (id
->driver_info
& BTUSB_QCA_ROME
) {
2916 data
->setup_on_usb
= btusb_setup_qca
;
2917 hdev
->set_bdaddr
= btusb_set_bdaddr_ath3012
;
2920 #ifdef CONFIG_BT_HCIBTUSB_RTL
2921 if (id
->driver_info
& BTUSB_REALTEK
) {
2922 hdev
->setup
= btrtl_setup_realtek
;
2924 /* Realtek devices lose their updated firmware over suspend,
2925 * but the USB hub doesn't notice any status change.
2926 * Explicitly request a device reset on resume.
2928 set_bit(BTUSB_RESET_RESUME
, &data
->flags
);
2932 if (id
->driver_info
& BTUSB_AMP
) {
2933 /* AMP controllers do not support SCO packets */
2936 /* Interface orders are hardcoded in the specification */
2937 data
->isoc
= usb_ifnum_to_if(data
->udev
, ifnum_base
+ 1);
2941 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2943 if (force_scofix
|| id
->driver_info
& BTUSB_WRONG_SCO_MTU
) {
2944 if (!disable_scofix
)
2945 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE
, &hdev
->quirks
);
2948 if (id
->driver_info
& BTUSB_BROKEN_ISOC
)
2951 if (id
->driver_info
& BTUSB_DIGIANSWER
) {
2952 data
->cmdreq_type
= USB_TYPE_VENDOR
;
2953 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2956 if (id
->driver_info
& BTUSB_CSR
) {
2957 struct usb_device
*udev
= data
->udev
;
2958 u16 bcdDevice
= le16_to_cpu(udev
->descriptor
.bcdDevice
);
2960 /* Old firmware would otherwise execute USB reset */
2961 if (bcdDevice
< 0x117)
2962 set_bit(HCI_QUIRK_RESET_ON_CLOSE
, &hdev
->quirks
);
2964 /* Fake CSR devices with broken commands */
2965 if (bcdDevice
<= 0x100 || bcdDevice
== 0x134)
2966 hdev
->setup
= btusb_setup_csr
;
2968 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY
, &hdev
->quirks
);
2971 if (id
->driver_info
& BTUSB_SNIFFER
) {
2972 struct usb_device
*udev
= data
->udev
;
2974 /* New sniffer firmware has crippled HCI interface */
2975 if (le16_to_cpu(udev
->descriptor
.bcdDevice
) > 0x997)
2976 set_bit(HCI_QUIRK_RAW_DEVICE
, &hdev
->quirks
);
2979 if (id
->driver_info
& BTUSB_INTEL_BOOT
) {
2980 /* A bug in the bootloader causes that interrupt interface is
2981 * only enabled after receiving SetInterface(0, AltSetting=0).
2983 err
= usb_set_interface(data
->udev
, 0, 0);
2985 BT_ERR("failed to set interface 0, alt 0 %d", err
);
2992 err
= usb_driver_claim_interface(&btusb_driver
,
3000 #ifdef CONFIG_BT_HCIBTUSB_BCM
3002 if (!usb_driver_claim_interface(&btusb_driver
,
3004 __set_diag_interface(hdev
);
3010 err
= hci_register_dev(hdev
);
3016 usb_set_intfdata(intf
, data
);
3021 static void btusb_disconnect(struct usb_interface
*intf
)
3023 struct btusb_data
*data
= usb_get_intfdata(intf
);
3024 struct hci_dev
*hdev
;
3026 BT_DBG("intf %p", intf
);
3032 usb_set_intfdata(data
->intf
, NULL
);
3035 usb_set_intfdata(data
->isoc
, NULL
);
3038 usb_set_intfdata(data
->diag
, NULL
);
3040 hci_unregister_dev(hdev
);
3042 if (intf
== data
->intf
) {
3044 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3046 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3047 } else if (intf
== data
->isoc
) {
3049 usb_driver_release_interface(&btusb_driver
, data
->diag
);
3050 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3051 } else if (intf
== data
->diag
) {
3052 usb_driver_release_interface(&btusb_driver
, data
->intf
);
3054 usb_driver_release_interface(&btusb_driver
, data
->isoc
);
3061 static int btusb_suspend(struct usb_interface
*intf
, pm_message_t message
)
3063 struct btusb_data
*data
= usb_get_intfdata(intf
);
3065 BT_DBG("intf %p", intf
);
3067 if (data
->suspend_count
++)
3070 spin_lock_irq(&data
->txlock
);
3071 if (!(PMSG_IS_AUTO(message
) && data
->tx_in_flight
)) {
3072 set_bit(BTUSB_SUSPENDING
, &data
->flags
);
3073 spin_unlock_irq(&data
->txlock
);
3075 spin_unlock_irq(&data
->txlock
);
3076 data
->suspend_count
--;
3080 cancel_work_sync(&data
->work
);
3082 btusb_stop_traffic(data
);
3083 usb_kill_anchored_urbs(&data
->tx_anchor
);
3085 /* Optionally request a device reset on resume, but only when
3086 * wakeups are disabled. If wakeups are enabled we assume the
3087 * device will stay powered up throughout suspend.
3089 if (test_bit(BTUSB_RESET_RESUME
, &data
->flags
) &&
3090 !device_may_wakeup(&data
->udev
->dev
))
3091 data
->udev
->reset_resume
= 1;
3096 static void play_deferred(struct btusb_data
*data
)
3101 while ((urb
= usb_get_from_anchor(&data
->deferred
))) {
3102 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
3106 data
->tx_in_flight
++;
3108 usb_scuttle_anchored_urbs(&data
->deferred
);
3111 static int btusb_resume(struct usb_interface
*intf
)
3113 struct btusb_data
*data
= usb_get_intfdata(intf
);
3114 struct hci_dev
*hdev
= data
->hdev
;
3117 BT_DBG("intf %p", intf
);
3119 if (--data
->suspend_count
)
3122 if (!test_bit(HCI_RUNNING
, &hdev
->flags
))
3125 if (test_bit(BTUSB_INTR_RUNNING
, &data
->flags
)) {
3126 err
= btusb_submit_intr_urb(hdev
, GFP_NOIO
);
3128 clear_bit(BTUSB_INTR_RUNNING
, &data
->flags
);
3133 if (test_bit(BTUSB_BULK_RUNNING
, &data
->flags
)) {
3134 err
= btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3136 clear_bit(BTUSB_BULK_RUNNING
, &data
->flags
);
3140 btusb_submit_bulk_urb(hdev
, GFP_NOIO
);
3143 if (test_bit(BTUSB_ISOC_RUNNING
, &data
->flags
)) {
3144 if (btusb_submit_isoc_urb(hdev
, GFP_NOIO
) < 0)
3145 clear_bit(BTUSB_ISOC_RUNNING
, &data
->flags
);
3147 btusb_submit_isoc_urb(hdev
, GFP_NOIO
);
3150 spin_lock_irq(&data
->txlock
);
3151 play_deferred(data
);
3152 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3153 spin_unlock_irq(&data
->txlock
);
3154 schedule_work(&data
->work
);
3159 usb_scuttle_anchored_urbs(&data
->deferred
);
3161 spin_lock_irq(&data
->txlock
);
3162 clear_bit(BTUSB_SUSPENDING
, &data
->flags
);
3163 spin_unlock_irq(&data
->txlock
);
3169 static struct usb_driver btusb_driver
= {
3171 .probe
= btusb_probe
,
3172 .disconnect
= btusb_disconnect
,
3174 .suspend
= btusb_suspend
,
3175 .resume
= btusb_resume
,
3177 .id_table
= btusb_table
,
3178 .supports_autosuspend
= 1,
3179 .disable_hub_initiated_lpm
= 1,
3182 module_usb_driver(btusb_driver
);
3184 module_param(disable_scofix
, bool, 0644);
3185 MODULE_PARM_DESC(disable_scofix
, "Disable fixup of wrong SCO buffer size");
3187 module_param(force_scofix
, bool, 0644);
3188 MODULE_PARM_DESC(force_scofix
, "Force fixup of wrong SCO buffers size");
3190 module_param(reset
, bool, 0644);
3191 MODULE_PARM_DESC(reset
, "Send HCI reset command on initialization");
3193 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3194 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION
);
3195 MODULE_VERSION(VERSION
);
3196 MODULE_LICENSE("GPL");