4 * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <minyard@mvista.com>
11 * Copyright 2002 MontaVista Software Inc.
12 * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
25 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
26 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
27 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
28 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
29 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
37 * This file holds the "policy" for the interface to the SMI state
38 * machine. It does the configuration, handles timers and interrupts,
39 * and drives the real SMI state machine.
42 #include <linux/module.h>
43 #include <linux/moduleparam.h>
44 #include <asm/system.h>
45 #include <linux/sched.h>
46 #include <linux/timer.h>
47 #include <linux/errno.h>
48 #include <linux/spinlock.h>
49 #include <linux/slab.h>
50 #include <linux/delay.h>
51 #include <linux/list.h>
52 #include <linux/pci.h>
53 #include <linux/ioport.h>
54 #include <linux/notifier.h>
55 #include <linux/mutex.h>
56 #include <linux/kthread.h>
58 #include <linux/interrupt.h>
59 #include <linux/rcupdate.h>
60 #include <linux/ipmi.h>
61 #include <linux/ipmi_smi.h>
63 #include "ipmi_si_sm.h"
64 #include <linux/init.h>
65 #include <linux/dmi.h>
66 #include <linux/string.h>
67 #include <linux/ctype.h>
68 #include <linux/pnp.h>
71 #include <linux/of_device.h>
72 #include <linux/of_platform.h>
73 #include <linux/of_address.h>
74 #include <linux/of_irq.h>
77 #define PFX "ipmi_si: "
79 /* Measure times between events in the driver. */
82 /* Call every 10 ms. */
83 #define SI_TIMEOUT_TIME_USEC 10000
84 #define SI_USEC_PER_JIFFY (1000000/HZ)
85 #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
86 #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
94 SI_CLEARING_FLAGS_THEN_SET_IRQ
,
96 SI_ENABLE_INTERRUPTS1
,
97 SI_ENABLE_INTERRUPTS2
,
98 SI_DISABLE_INTERRUPTS1
,
99 SI_DISABLE_INTERRUPTS2
100 /* FIXME - add watchdog stuff. */
103 /* Some BT-specific defines we need here. */
104 #define IPMI_BT_INTMASK_REG 2
105 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2
106 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1
109 SI_KCS
, SI_SMIC
, SI_BT
111 static char *si_to_str
[] = { "kcs", "smic", "bt" };
113 static char *ipmi_addr_src_to_str
[] = { NULL
, "hotmod", "hardcoded", "SPMI",
114 "ACPI", "SMBIOS", "PCI",
115 "device-tree", "default" };
117 #define DEVICE_NAME "ipmi_si"
119 static struct platform_driver ipmi_driver
= {
122 .bus
= &platform_bus_type
128 * Indexes into stats[] in smi_info below.
130 enum si_stat_indexes
{
132 * Number of times the driver requested a timer while an operation
135 SI_STAT_short_timeouts
= 0,
138 * Number of times the driver requested a timer while nothing was in
141 SI_STAT_long_timeouts
,
143 /* Number of times the interface was idle while being polled. */
146 /* Number of interrupts the driver handled. */
149 /* Number of time the driver got an ATTN from the hardware. */
152 /* Number of times the driver requested flags from the hardware. */
153 SI_STAT_flag_fetches
,
155 /* Number of times the hardware didn't follow the state machine. */
158 /* Number of completed messages. */
159 SI_STAT_complete_transactions
,
161 /* Number of IPMI events received from the hardware. */
164 /* Number of watchdog pretimeouts. */
165 SI_STAT_watchdog_pretimeouts
,
167 /* Number of asyncronous messages received. */
168 SI_STAT_incoming_messages
,
171 /* This *must* remain last, add new values above this. */
178 struct si_sm_data
*si_sm
;
179 struct si_sm_handlers
*handlers
;
180 enum si_type si_type
;
183 struct list_head xmit_msgs
;
184 struct list_head hp_xmit_msgs
;
185 struct ipmi_smi_msg
*curr_msg
;
186 enum si_intf_state si_state
;
189 * Used to handle the various types of I/O that can occur with
193 int (*io_setup
)(struct smi_info
*info
);
194 void (*io_cleanup
)(struct smi_info
*info
);
195 int (*irq_setup
)(struct smi_info
*info
);
196 void (*irq_cleanup
)(struct smi_info
*info
);
197 unsigned int io_size
;
198 enum ipmi_addr_src addr_source
; /* ACPI, PCI, SMBIOS, hardcode, etc. */
199 void (*addr_source_cleanup
)(struct smi_info
*info
);
200 void *addr_source_data
;
203 * Per-OEM handler, called from handle_flags(). Returns 1
204 * when handle_flags() needs to be re-run or 0 indicating it
205 * set si_state itself.
207 int (*oem_data_avail_handler
)(struct smi_info
*smi_info
);
210 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
211 * is set to hold the flags until we are done handling everything
214 #define RECEIVE_MSG_AVAIL 0x01
215 #define EVENT_MSG_BUFFER_FULL 0x02
216 #define WDT_PRE_TIMEOUT_INT 0x08
217 #define OEM0_DATA_AVAIL 0x20
218 #define OEM1_DATA_AVAIL 0x40
219 #define OEM2_DATA_AVAIL 0x80
220 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
223 unsigned char msg_flags
;
225 /* Does the BMC have an event buffer? */
226 char has_event_buffer
;
229 * If set to true, this will request events the next time the
230 * state machine is idle.
235 * If true, run the state machine to completion on every send
236 * call. Generally used after a panic to make sure stuff goes
239 int run_to_completion
;
241 /* The I/O port of an SI interface. */
245 * The space between start addresses of the two ports. For
246 * instance, if the first port is 0xca2 and the spacing is 4, then
247 * the second port is 0xca6.
249 unsigned int spacing
;
251 /* zero if no irq; */
254 /* The timer for this si. */
255 struct timer_list si_timer
;
257 /* The time (in jiffies) the last timeout occurred at. */
258 unsigned long last_timeout_jiffies
;
260 /* Used to gracefully stop the timer without race conditions. */
261 atomic_t stop_operation
;
264 * The driver will disable interrupts when it gets into a
265 * situation where it cannot handle messages due to lack of
266 * memory. Once that situation clears up, it will re-enable
269 int interrupt_disabled
;
271 /* From the get device id response... */
272 struct ipmi_device_id device_id
;
274 /* Driver model stuff. */
276 struct platform_device
*pdev
;
279 * True if we allocated the device, false if it came from
280 * someplace else (like PCI).
284 /* Slave address, could be reported from DMI. */
285 unsigned char slave_addr
;
287 /* Counters and things for the proc filesystem. */
288 atomic_t stats
[SI_NUM_STATS
];
290 struct task_struct
*thread
;
292 struct list_head link
;
293 union ipmi_smi_info_union addr_info
;
296 #define smi_inc_stat(smi, stat) \
297 atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
298 #define smi_get_stat(smi, stat) \
299 ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
301 #define SI_MAX_PARMS 4
303 static int force_kipmid
[SI_MAX_PARMS
];
304 static int num_force_kipmid
;
306 static int pci_registered
;
309 static int pnp_registered
;
312 static int of_registered
;
315 static unsigned int kipmid_max_busy_us
[SI_MAX_PARMS
];
316 static int num_max_busy_us
;
318 static int unload_when_empty
= 1;
320 static int add_smi(struct smi_info
*smi
);
321 static int try_smi_init(struct smi_info
*smi
);
322 static void cleanup_one_si(struct smi_info
*to_clean
);
323 static void cleanup_ipmi_si(void);
325 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list
);
326 static int register_xaction_notifier(struct notifier_block
*nb
)
328 return atomic_notifier_chain_register(&xaction_notifier_list
, nb
);
331 static void deliver_recv_msg(struct smi_info
*smi_info
,
332 struct ipmi_smi_msg
*msg
)
334 /* Deliver the message to the upper layer with the lock
337 if (smi_info
->run_to_completion
) {
338 ipmi_smi_msg_received(smi_info
->intf
, msg
);
340 spin_unlock(&(smi_info
->si_lock
));
341 ipmi_smi_msg_received(smi_info
->intf
, msg
);
342 spin_lock(&(smi_info
->si_lock
));
346 static void return_hosed_msg(struct smi_info
*smi_info
, int cCode
)
348 struct ipmi_smi_msg
*msg
= smi_info
->curr_msg
;
350 if (cCode
< 0 || cCode
> IPMI_ERR_UNSPECIFIED
)
351 cCode
= IPMI_ERR_UNSPECIFIED
;
352 /* else use it as is */
354 /* Make it a reponse */
355 msg
->rsp
[0] = msg
->data
[0] | 4;
356 msg
->rsp
[1] = msg
->data
[1];
360 smi_info
->curr_msg
= NULL
;
361 deliver_recv_msg(smi_info
, msg
);
364 static enum si_sm_result
start_next_msg(struct smi_info
*smi_info
)
367 struct list_head
*entry
= NULL
;
373 * No need to save flags, we aleady have interrupts off and we
374 * already hold the SMI lock.
376 if (!smi_info
->run_to_completion
)
377 spin_lock(&(smi_info
->msg_lock
));
379 /* Pick the high priority queue first. */
380 if (!list_empty(&(smi_info
->hp_xmit_msgs
))) {
381 entry
= smi_info
->hp_xmit_msgs
.next
;
382 } else if (!list_empty(&(smi_info
->xmit_msgs
))) {
383 entry
= smi_info
->xmit_msgs
.next
;
387 smi_info
->curr_msg
= NULL
;
393 smi_info
->curr_msg
= list_entry(entry
,
398 printk(KERN_DEBUG
"**Start2: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
400 err
= atomic_notifier_call_chain(&xaction_notifier_list
,
402 if (err
& NOTIFY_STOP_MASK
) {
403 rv
= SI_SM_CALL_WITHOUT_DELAY
;
406 err
= smi_info
->handlers
->start_transaction(
408 smi_info
->curr_msg
->data
,
409 smi_info
->curr_msg
->data_size
);
411 return_hosed_msg(smi_info
, err
);
413 rv
= SI_SM_CALL_WITHOUT_DELAY
;
416 if (!smi_info
->run_to_completion
)
417 spin_unlock(&(smi_info
->msg_lock
));
422 static void start_enable_irq(struct smi_info
*smi_info
)
424 unsigned char msg
[2];
427 * If we are enabling interrupts, we have to tell the
430 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
431 msg
[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD
;
433 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
434 smi_info
->si_state
= SI_ENABLE_INTERRUPTS1
;
437 static void start_disable_irq(struct smi_info
*smi_info
)
439 unsigned char msg
[2];
441 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
442 msg
[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD
;
444 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
445 smi_info
->si_state
= SI_DISABLE_INTERRUPTS1
;
448 static void start_clear_flags(struct smi_info
*smi_info
)
450 unsigned char msg
[3];
452 /* Make sure the watchdog pre-timeout flag is not set at startup. */
453 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
454 msg
[1] = IPMI_CLEAR_MSG_FLAGS_CMD
;
455 msg
[2] = WDT_PRE_TIMEOUT_INT
;
457 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 3);
458 smi_info
->si_state
= SI_CLEARING_FLAGS
;
462 * When we have a situtaion where we run out of memory and cannot
463 * allocate messages, we just leave them in the BMC and run the system
464 * polled until we can allocate some memory. Once we have some
465 * memory, we will re-enable the interrupt.
467 static inline void disable_si_irq(struct smi_info
*smi_info
)
469 if ((smi_info
->irq
) && (!smi_info
->interrupt_disabled
)) {
470 start_disable_irq(smi_info
);
471 smi_info
->interrupt_disabled
= 1;
472 if (!atomic_read(&smi_info
->stop_operation
))
473 mod_timer(&smi_info
->si_timer
,
474 jiffies
+ SI_TIMEOUT_JIFFIES
);
478 static inline void enable_si_irq(struct smi_info
*smi_info
)
480 if ((smi_info
->irq
) && (smi_info
->interrupt_disabled
)) {
481 start_enable_irq(smi_info
);
482 smi_info
->interrupt_disabled
= 0;
486 static void handle_flags(struct smi_info
*smi_info
)
489 if (smi_info
->msg_flags
& WDT_PRE_TIMEOUT_INT
) {
490 /* Watchdog pre-timeout */
491 smi_inc_stat(smi_info
, watchdog_pretimeouts
);
493 start_clear_flags(smi_info
);
494 smi_info
->msg_flags
&= ~WDT_PRE_TIMEOUT_INT
;
495 spin_unlock(&(smi_info
->si_lock
));
496 ipmi_smi_watchdog_pretimeout(smi_info
->intf
);
497 spin_lock(&(smi_info
->si_lock
));
498 } else if (smi_info
->msg_flags
& RECEIVE_MSG_AVAIL
) {
499 /* Messages available. */
500 smi_info
->curr_msg
= ipmi_alloc_smi_msg();
501 if (!smi_info
->curr_msg
) {
502 disable_si_irq(smi_info
);
503 smi_info
->si_state
= SI_NORMAL
;
506 enable_si_irq(smi_info
);
508 smi_info
->curr_msg
->data
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
509 smi_info
->curr_msg
->data
[1] = IPMI_GET_MSG_CMD
;
510 smi_info
->curr_msg
->data_size
= 2;
512 smi_info
->handlers
->start_transaction(
514 smi_info
->curr_msg
->data
,
515 smi_info
->curr_msg
->data_size
);
516 smi_info
->si_state
= SI_GETTING_MESSAGES
;
517 } else if (smi_info
->msg_flags
& EVENT_MSG_BUFFER_FULL
) {
518 /* Events available. */
519 smi_info
->curr_msg
= ipmi_alloc_smi_msg();
520 if (!smi_info
->curr_msg
) {
521 disable_si_irq(smi_info
);
522 smi_info
->si_state
= SI_NORMAL
;
525 enable_si_irq(smi_info
);
527 smi_info
->curr_msg
->data
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
528 smi_info
->curr_msg
->data
[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD
;
529 smi_info
->curr_msg
->data_size
= 2;
531 smi_info
->handlers
->start_transaction(
533 smi_info
->curr_msg
->data
,
534 smi_info
->curr_msg
->data_size
);
535 smi_info
->si_state
= SI_GETTING_EVENTS
;
536 } else if (smi_info
->msg_flags
& OEM_DATA_AVAIL
&&
537 smi_info
->oem_data_avail_handler
) {
538 if (smi_info
->oem_data_avail_handler(smi_info
))
541 smi_info
->si_state
= SI_NORMAL
;
544 static void handle_transaction_done(struct smi_info
*smi_info
)
546 struct ipmi_smi_msg
*msg
;
551 printk(KERN_DEBUG
"**Done: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
553 switch (smi_info
->si_state
) {
555 if (!smi_info
->curr_msg
)
558 smi_info
->curr_msg
->rsp_size
559 = smi_info
->handlers
->get_result(
561 smi_info
->curr_msg
->rsp
,
562 IPMI_MAX_MSG_LENGTH
);
565 * Do this here becase deliver_recv_msg() releases the
566 * lock, and a new message can be put in during the
567 * time the lock is released.
569 msg
= smi_info
->curr_msg
;
570 smi_info
->curr_msg
= NULL
;
571 deliver_recv_msg(smi_info
, msg
);
574 case SI_GETTING_FLAGS
:
576 unsigned char msg
[4];
579 /* We got the flags from the SMI, now handle them. */
580 len
= smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
582 /* Error fetching flags, just give up for now. */
583 smi_info
->si_state
= SI_NORMAL
;
584 } else if (len
< 4) {
586 * Hmm, no flags. That's technically illegal, but
587 * don't use uninitialized data.
589 smi_info
->si_state
= SI_NORMAL
;
591 smi_info
->msg_flags
= msg
[3];
592 handle_flags(smi_info
);
597 case SI_CLEARING_FLAGS
:
598 case SI_CLEARING_FLAGS_THEN_SET_IRQ
:
600 unsigned char msg
[3];
602 /* We cleared the flags. */
603 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 3);
605 /* Error clearing flags */
606 dev_warn(smi_info
->dev
,
607 "Error clearing flags: %2.2x\n", msg
[2]);
609 if (smi_info
->si_state
== SI_CLEARING_FLAGS_THEN_SET_IRQ
)
610 start_enable_irq(smi_info
);
612 smi_info
->si_state
= SI_NORMAL
;
616 case SI_GETTING_EVENTS
:
618 smi_info
->curr_msg
->rsp_size
619 = smi_info
->handlers
->get_result(
621 smi_info
->curr_msg
->rsp
,
622 IPMI_MAX_MSG_LENGTH
);
625 * Do this here becase deliver_recv_msg() releases the
626 * lock, and a new message can be put in during the
627 * time the lock is released.
629 msg
= smi_info
->curr_msg
;
630 smi_info
->curr_msg
= NULL
;
631 if (msg
->rsp
[2] != 0) {
632 /* Error getting event, probably done. */
635 /* Take off the event flag. */
636 smi_info
->msg_flags
&= ~EVENT_MSG_BUFFER_FULL
;
637 handle_flags(smi_info
);
639 smi_inc_stat(smi_info
, events
);
642 * Do this before we deliver the message
643 * because delivering the message releases the
644 * lock and something else can mess with the
647 handle_flags(smi_info
);
649 deliver_recv_msg(smi_info
, msg
);
654 case SI_GETTING_MESSAGES
:
656 smi_info
->curr_msg
->rsp_size
657 = smi_info
->handlers
->get_result(
659 smi_info
->curr_msg
->rsp
,
660 IPMI_MAX_MSG_LENGTH
);
663 * Do this here becase deliver_recv_msg() releases the
664 * lock, and a new message can be put in during the
665 * time the lock is released.
667 msg
= smi_info
->curr_msg
;
668 smi_info
->curr_msg
= NULL
;
669 if (msg
->rsp
[2] != 0) {
670 /* Error getting event, probably done. */
673 /* Take off the msg flag. */
674 smi_info
->msg_flags
&= ~RECEIVE_MSG_AVAIL
;
675 handle_flags(smi_info
);
677 smi_inc_stat(smi_info
, incoming_messages
);
680 * Do this before we deliver the message
681 * because delivering the message releases the
682 * lock and something else can mess with the
685 handle_flags(smi_info
);
687 deliver_recv_msg(smi_info
, msg
);
692 case SI_ENABLE_INTERRUPTS1
:
694 unsigned char msg
[4];
696 /* We got the flags from the SMI, now handle them. */
697 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
699 dev_warn(smi_info
->dev
, "Could not enable interrupts"
700 ", failed get, using polled mode.\n");
701 smi_info
->si_state
= SI_NORMAL
;
703 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
704 msg
[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD
;
706 IPMI_BMC_RCV_MSG_INTR
|
707 IPMI_BMC_EVT_MSG_INTR
);
708 smi_info
->handlers
->start_transaction(
709 smi_info
->si_sm
, msg
, 3);
710 smi_info
->si_state
= SI_ENABLE_INTERRUPTS2
;
715 case SI_ENABLE_INTERRUPTS2
:
717 unsigned char msg
[4];
719 /* We got the flags from the SMI, now handle them. */
720 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
722 dev_warn(smi_info
->dev
, "Could not enable interrupts"
723 ", failed set, using polled mode.\n");
725 smi_info
->interrupt_disabled
= 0;
726 smi_info
->si_state
= SI_NORMAL
;
730 case SI_DISABLE_INTERRUPTS1
:
732 unsigned char msg
[4];
734 /* We got the flags from the SMI, now handle them. */
735 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
737 dev_warn(smi_info
->dev
, "Could not disable interrupts"
739 smi_info
->si_state
= SI_NORMAL
;
741 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
742 msg
[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD
;
744 ~(IPMI_BMC_RCV_MSG_INTR
|
745 IPMI_BMC_EVT_MSG_INTR
));
746 smi_info
->handlers
->start_transaction(
747 smi_info
->si_sm
, msg
, 3);
748 smi_info
->si_state
= SI_DISABLE_INTERRUPTS2
;
753 case SI_DISABLE_INTERRUPTS2
:
755 unsigned char msg
[4];
757 /* We got the flags from the SMI, now handle them. */
758 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
760 dev_warn(smi_info
->dev
, "Could not disable interrupts"
763 smi_info
->si_state
= SI_NORMAL
;
770 * Called on timeouts and events. Timeouts should pass the elapsed
771 * time, interrupts should pass in zero. Must be called with
772 * si_lock held and interrupts disabled.
774 static enum si_sm_result
smi_event_handler(struct smi_info
*smi_info
,
777 enum si_sm_result si_sm_result
;
781 * There used to be a loop here that waited a little while
782 * (around 25us) before giving up. That turned out to be
783 * pointless, the minimum delays I was seeing were in the 300us
784 * range, which is far too long to wait in an interrupt. So
785 * we just run until the state machine tells us something
786 * happened or it needs a delay.
788 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, time
);
790 while (si_sm_result
== SI_SM_CALL_WITHOUT_DELAY
)
791 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
793 if (si_sm_result
== SI_SM_TRANSACTION_COMPLETE
) {
794 smi_inc_stat(smi_info
, complete_transactions
);
796 handle_transaction_done(smi_info
);
797 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
798 } else if (si_sm_result
== SI_SM_HOSED
) {
799 smi_inc_stat(smi_info
, hosed_count
);
802 * Do the before return_hosed_msg, because that
805 smi_info
->si_state
= SI_NORMAL
;
806 if (smi_info
->curr_msg
!= NULL
) {
808 * If we were handling a user message, format
809 * a response to send to the upper layer to
810 * tell it about the error.
812 return_hosed_msg(smi_info
, IPMI_ERR_UNSPECIFIED
);
814 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
818 * We prefer handling attn over new messages. But don't do
819 * this if there is not yet an upper layer to handle anything.
821 if (likely(smi_info
->intf
) && si_sm_result
== SI_SM_ATTN
) {
822 unsigned char msg
[2];
824 smi_inc_stat(smi_info
, attentions
);
827 * Got a attn, send down a get message flags to see
828 * what's causing it. It would be better to handle
829 * this in the upper layer, but due to the way
830 * interrupts work with the SMI, that's not really
833 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
834 msg
[1] = IPMI_GET_MSG_FLAGS_CMD
;
836 smi_info
->handlers
->start_transaction(
837 smi_info
->si_sm
, msg
, 2);
838 smi_info
->si_state
= SI_GETTING_FLAGS
;
842 /* If we are currently idle, try to start the next message. */
843 if (si_sm_result
== SI_SM_IDLE
) {
844 smi_inc_stat(smi_info
, idles
);
846 si_sm_result
= start_next_msg(smi_info
);
847 if (si_sm_result
!= SI_SM_IDLE
)
851 if ((si_sm_result
== SI_SM_IDLE
)
852 && (atomic_read(&smi_info
->req_events
))) {
854 * We are idle and the upper layer requested that I fetch
857 atomic_set(&smi_info
->req_events
, 0);
859 smi_info
->curr_msg
= ipmi_alloc_smi_msg();
860 if (!smi_info
->curr_msg
)
863 smi_info
->curr_msg
->data
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
864 smi_info
->curr_msg
->data
[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD
;
865 smi_info
->curr_msg
->data_size
= 2;
867 smi_info
->handlers
->start_transaction(
869 smi_info
->curr_msg
->data
,
870 smi_info
->curr_msg
->data_size
);
871 smi_info
->si_state
= SI_GETTING_EVENTS
;
878 static void sender(void *send_info
,
879 struct ipmi_smi_msg
*msg
,
882 struct smi_info
*smi_info
= send_info
;
883 enum si_sm_result result
;
889 if (atomic_read(&smi_info
->stop_operation
)) {
890 msg
->rsp
[0] = msg
->data
[0] | 4;
891 msg
->rsp
[1] = msg
->data
[1];
892 msg
->rsp
[2] = IPMI_ERR_UNSPECIFIED
;
894 deliver_recv_msg(smi_info
, msg
);
900 printk("**Enqueue: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
903 mod_timer(&smi_info
->si_timer
, jiffies
+ SI_TIMEOUT_JIFFIES
);
905 if (smi_info
->thread
)
906 wake_up_process(smi_info
->thread
);
908 if (smi_info
->run_to_completion
) {
910 * If we are running to completion, then throw it in
911 * the list and run transactions until everything is
912 * clear. Priority doesn't matter here.
916 * Run to completion means we are single-threaded, no
919 list_add_tail(&(msg
->link
), &(smi_info
->xmit_msgs
));
921 result
= smi_event_handler(smi_info
, 0);
922 while (result
!= SI_SM_IDLE
) {
923 udelay(SI_SHORT_TIMEOUT_USEC
);
924 result
= smi_event_handler(smi_info
,
925 SI_SHORT_TIMEOUT_USEC
);
930 spin_lock_irqsave(&smi_info
->msg_lock
, flags
);
932 list_add_tail(&msg
->link
, &smi_info
->hp_xmit_msgs
);
934 list_add_tail(&msg
->link
, &smi_info
->xmit_msgs
);
935 spin_unlock_irqrestore(&smi_info
->msg_lock
, flags
);
937 spin_lock_irqsave(&smi_info
->si_lock
, flags
);
938 if (smi_info
->si_state
== SI_NORMAL
&& smi_info
->curr_msg
== NULL
)
939 start_next_msg(smi_info
);
940 spin_unlock_irqrestore(&smi_info
->si_lock
, flags
);
943 static void set_run_to_completion(void *send_info
, int i_run_to_completion
)
945 struct smi_info
*smi_info
= send_info
;
946 enum si_sm_result result
;
948 smi_info
->run_to_completion
= i_run_to_completion
;
949 if (i_run_to_completion
) {
950 result
= smi_event_handler(smi_info
, 0);
951 while (result
!= SI_SM_IDLE
) {
952 udelay(SI_SHORT_TIMEOUT_USEC
);
953 result
= smi_event_handler(smi_info
,
954 SI_SHORT_TIMEOUT_USEC
);
960 * Use -1 in the nsec value of the busy waiting timespec to tell that
961 * we are spinning in kipmid looking for something and not delaying
964 static inline void ipmi_si_set_not_busy(struct timespec
*ts
)
968 static inline int ipmi_si_is_busy(struct timespec
*ts
)
970 return ts
->tv_nsec
!= -1;
973 static int ipmi_thread_busy_wait(enum si_sm_result smi_result
,
974 const struct smi_info
*smi_info
,
975 struct timespec
*busy_until
)
977 unsigned int max_busy_us
= 0;
979 if (smi_info
->intf_num
< num_max_busy_us
)
980 max_busy_us
= kipmid_max_busy_us
[smi_info
->intf_num
];
981 if (max_busy_us
== 0 || smi_result
!= SI_SM_CALL_WITH_DELAY
)
982 ipmi_si_set_not_busy(busy_until
);
983 else if (!ipmi_si_is_busy(busy_until
)) {
984 getnstimeofday(busy_until
);
985 timespec_add_ns(busy_until
, max_busy_us
*NSEC_PER_USEC
);
988 getnstimeofday(&now
);
989 if (unlikely(timespec_compare(&now
, busy_until
) > 0)) {
990 ipmi_si_set_not_busy(busy_until
);
999 * A busy-waiting loop for speeding up IPMI operation.
1001 * Lousy hardware makes this hard. This is only enabled for systems
1002 * that are not BT and do not have interrupts. It starts spinning
1003 * when an operation is complete or until max_busy tells it to stop
1004 * (if that is enabled). See the paragraph on kimid_max_busy_us in
1005 * Documentation/IPMI.txt for details.
1007 static int ipmi_thread(void *data
)
1009 struct smi_info
*smi_info
= data
;
1010 unsigned long flags
;
1011 enum si_sm_result smi_result
;
1012 struct timespec busy_until
;
1014 ipmi_si_set_not_busy(&busy_until
);
1015 set_user_nice(current
, 19);
1016 while (!kthread_should_stop()) {
1019 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1020 smi_result
= smi_event_handler(smi_info
, 0);
1021 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1022 busy_wait
= ipmi_thread_busy_wait(smi_result
, smi_info
,
1024 if (smi_result
== SI_SM_CALL_WITHOUT_DELAY
)
1026 else if (smi_result
== SI_SM_CALL_WITH_DELAY
&& busy_wait
)
1028 else if (smi_result
== SI_SM_IDLE
)
1029 schedule_timeout_interruptible(100);
1031 schedule_timeout_interruptible(1);
1037 static void poll(void *send_info
)
1039 struct smi_info
*smi_info
= send_info
;
1040 unsigned long flags
;
1043 * Make sure there is some delay in the poll loop so we can
1044 * drive time forward and timeout things.
1047 spin_lock_irqsave(&smi_info
->si_lock
, flags
);
1048 smi_event_handler(smi_info
, 10);
1049 spin_unlock_irqrestore(&smi_info
->si_lock
, flags
);
1052 static void request_events(void *send_info
)
1054 struct smi_info
*smi_info
= send_info
;
1056 if (atomic_read(&smi_info
->stop_operation
) ||
1057 !smi_info
->has_event_buffer
)
1060 atomic_set(&smi_info
->req_events
, 1);
1063 static int initialized
;
1065 static void smi_timeout(unsigned long data
)
1067 struct smi_info
*smi_info
= (struct smi_info
*) data
;
1068 enum si_sm_result smi_result
;
1069 unsigned long flags
;
1070 unsigned long jiffies_now
;
1077 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1079 do_gettimeofday(&t
);
1080 printk(KERN_DEBUG
"**Timer: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
1082 jiffies_now
= jiffies
;
1083 time_diff
= (((long)jiffies_now
- (long)smi_info
->last_timeout_jiffies
)
1084 * SI_USEC_PER_JIFFY
);
1085 smi_result
= smi_event_handler(smi_info
, time_diff
);
1087 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1089 smi_info
->last_timeout_jiffies
= jiffies_now
;
1091 if ((smi_info
->irq
) && (!smi_info
->interrupt_disabled
)) {
1092 /* Running with interrupts, only do long timeouts. */
1093 timeout
= jiffies
+ SI_TIMEOUT_JIFFIES
;
1094 smi_inc_stat(smi_info
, long_timeouts
);
1099 * If the state machine asks for a short delay, then shorten
1100 * the timer timeout.
1102 if (smi_result
== SI_SM_CALL_WITH_DELAY
) {
1103 smi_inc_stat(smi_info
, short_timeouts
);
1104 timeout
= jiffies
+ 1;
1106 smi_inc_stat(smi_info
, long_timeouts
);
1107 timeout
= jiffies
+ SI_TIMEOUT_JIFFIES
;
1111 if (smi_result
!= SI_SM_IDLE
)
1112 mod_timer(&(smi_info
->si_timer
), timeout
);
1115 static irqreturn_t
si_irq_handler(int irq
, void *data
)
1117 struct smi_info
*smi_info
= data
;
1118 unsigned long flags
;
1123 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1125 smi_inc_stat(smi_info
, interrupts
);
1128 do_gettimeofday(&t
);
1129 printk(KERN_DEBUG
"**Interrupt: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
1131 smi_event_handler(smi_info
, 0);
1132 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1136 static irqreturn_t
si_bt_irq_handler(int irq
, void *data
)
1138 struct smi_info
*smi_info
= data
;
1139 /* We need to clear the IRQ flag for the BT interface. */
1140 smi_info
->io
.outputb(&smi_info
->io
, IPMI_BT_INTMASK_REG
,
1141 IPMI_BT_INTMASK_CLEAR_IRQ_BIT
1142 | IPMI_BT_INTMASK_ENABLE_IRQ_BIT
);
1143 return si_irq_handler(irq
, data
);
1146 static int smi_start_processing(void *send_info
,
1149 struct smi_info
*new_smi
= send_info
;
1152 new_smi
->intf
= intf
;
1154 /* Try to claim any interrupts. */
1155 if (new_smi
->irq_setup
)
1156 new_smi
->irq_setup(new_smi
);
1158 /* Set up the timer that drives the interface. */
1159 setup_timer(&new_smi
->si_timer
, smi_timeout
, (long)new_smi
);
1160 new_smi
->last_timeout_jiffies
= jiffies
;
1161 mod_timer(&new_smi
->si_timer
, jiffies
+ SI_TIMEOUT_JIFFIES
);
1164 * Check if the user forcefully enabled the daemon.
1166 if (new_smi
->intf_num
< num_force_kipmid
)
1167 enable
= force_kipmid
[new_smi
->intf_num
];
1169 * The BT interface is efficient enough to not need a thread,
1170 * and there is no need for a thread if we have interrupts.
1172 else if ((new_smi
->si_type
!= SI_BT
) && (!new_smi
->irq
))
1176 new_smi
->thread
= kthread_run(ipmi_thread
, new_smi
,
1177 "kipmi%d", new_smi
->intf_num
);
1178 if (IS_ERR(new_smi
->thread
)) {
1179 dev_notice(new_smi
->dev
, "Could not start"
1180 " kernel thread due to error %ld, only using"
1181 " timers to drive the interface\n",
1182 PTR_ERR(new_smi
->thread
));
1183 new_smi
->thread
= NULL
;
1190 static int get_smi_info(void *send_info
, struct ipmi_smi_info
*data
)
1192 struct smi_info
*smi
= send_info
;
1194 data
->addr_src
= smi
->addr_source
;
1195 data
->dev
= smi
->dev
;
1196 data
->addr_info
= smi
->addr_info
;
1197 get_device(smi
->dev
);
1202 static void set_maintenance_mode(void *send_info
, int enable
)
1204 struct smi_info
*smi_info
= send_info
;
1207 atomic_set(&smi_info
->req_events
, 0);
1210 static struct ipmi_smi_handlers handlers
= {
1211 .owner
= THIS_MODULE
,
1212 .start_processing
= smi_start_processing
,
1213 .get_smi_info
= get_smi_info
,
1215 .request_events
= request_events
,
1216 .set_maintenance_mode
= set_maintenance_mode
,
1217 .set_run_to_completion
= set_run_to_completion
,
1222 * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
1223 * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
1226 static LIST_HEAD(smi_infos
);
1227 static DEFINE_MUTEX(smi_infos_lock
);
1228 static int smi_num
; /* Used to sequence the SMIs */
1230 #define DEFAULT_REGSPACING 1
1231 #define DEFAULT_REGSIZE 1
1233 static int si_trydefaults
= 1;
1234 static char *si_type
[SI_MAX_PARMS
];
1235 #define MAX_SI_TYPE_STR 30
1236 static char si_type_str
[MAX_SI_TYPE_STR
];
1237 static unsigned long addrs
[SI_MAX_PARMS
];
1238 static unsigned int num_addrs
;
1239 static unsigned int ports
[SI_MAX_PARMS
];
1240 static unsigned int num_ports
;
1241 static int irqs
[SI_MAX_PARMS
];
1242 static unsigned int num_irqs
;
1243 static int regspacings
[SI_MAX_PARMS
];
1244 static unsigned int num_regspacings
;
1245 static int regsizes
[SI_MAX_PARMS
];
1246 static unsigned int num_regsizes
;
1247 static int regshifts
[SI_MAX_PARMS
];
1248 static unsigned int num_regshifts
;
1249 static int slave_addrs
[SI_MAX_PARMS
]; /* Leaving 0 chooses the default value */
1250 static unsigned int num_slave_addrs
;
1252 #define IPMI_IO_ADDR_SPACE 0
1253 #define IPMI_MEM_ADDR_SPACE 1
1254 static char *addr_space_to_str
[] = { "i/o", "mem" };
1256 static int hotmod_handler(const char *val
, struct kernel_param
*kp
);
1258 module_param_call(hotmod
, hotmod_handler
, NULL
, NULL
, 0200);
1259 MODULE_PARM_DESC(hotmod
, "Add and remove interfaces. See"
1260 " Documentation/IPMI.txt in the kernel sources for the"
1263 module_param_named(trydefaults
, si_trydefaults
, bool, 0);
1264 MODULE_PARM_DESC(trydefaults
, "Setting this to 'false' will disable the"
1265 " default scan of the KCS and SMIC interface at the standard"
1267 module_param_string(type
, si_type_str
, MAX_SI_TYPE_STR
, 0);
1268 MODULE_PARM_DESC(type
, "Defines the type of each interface, each"
1269 " interface separated by commas. The types are 'kcs',"
1270 " 'smic', and 'bt'. For example si_type=kcs,bt will set"
1271 " the first interface to kcs and the second to bt");
1272 module_param_array(addrs
, ulong
, &num_addrs
, 0);
1273 MODULE_PARM_DESC(addrs
, "Sets the memory address of each interface, the"
1274 " addresses separated by commas. Only use if an interface"
1275 " is in memory. Otherwise, set it to zero or leave"
1277 module_param_array(ports
, uint
, &num_ports
, 0);
1278 MODULE_PARM_DESC(ports
, "Sets the port address of each interface, the"
1279 " addresses separated by commas. Only use if an interface"
1280 " is a port. Otherwise, set it to zero or leave"
1282 module_param_array(irqs
, int, &num_irqs
, 0);
1283 MODULE_PARM_DESC(irqs
, "Sets the interrupt of each interface, the"
1284 " addresses separated by commas. Only use if an interface"
1285 " has an interrupt. Otherwise, set it to zero or leave"
1287 module_param_array(regspacings
, int, &num_regspacings
, 0);
1288 MODULE_PARM_DESC(regspacings
, "The number of bytes between the start address"
1289 " and each successive register used by the interface. For"
1290 " instance, if the start address is 0xca2 and the spacing"
1291 " is 2, then the second address is at 0xca4. Defaults"
1293 module_param_array(regsizes
, int, &num_regsizes
, 0);
1294 MODULE_PARM_DESC(regsizes
, "The size of the specific IPMI register in bytes."
1295 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1296 " 16-bit, 32-bit, or 64-bit register. Use this if you"
1297 " the 8-bit IPMI register has to be read from a larger"
1299 module_param_array(regshifts
, int, &num_regshifts
, 0);
1300 MODULE_PARM_DESC(regshifts
, "The amount to shift the data read from the."
1301 " IPMI register, in bits. For instance, if the data"
1302 " is read from a 32-bit word and the IPMI data is in"
1303 " bit 8-15, then the shift would be 8");
1304 module_param_array(slave_addrs
, int, &num_slave_addrs
, 0);
1305 MODULE_PARM_DESC(slave_addrs
, "Set the default IPMB slave address for"
1306 " the controller. Normally this is 0x20, but can be"
1307 " overridden by this parm. This is an array indexed"
1308 " by interface number.");
1309 module_param_array(force_kipmid
, int, &num_force_kipmid
, 0);
1310 MODULE_PARM_DESC(force_kipmid
, "Force the kipmi daemon to be enabled (1) or"
1311 " disabled(0). Normally the IPMI driver auto-detects"
1312 " this, but the value may be overridden by this parm.");
1313 module_param(unload_when_empty
, int, 0);
1314 MODULE_PARM_DESC(unload_when_empty
, "Unload the module if no interfaces are"
1315 " specified or found, default is 1. Setting to 0"
1316 " is useful for hot add of devices using hotmod.");
1317 module_param_array(kipmid_max_busy_us
, uint
, &num_max_busy_us
, 0644);
1318 MODULE_PARM_DESC(kipmid_max_busy_us
,
1319 "Max time (in microseconds) to busy-wait for IPMI data before"
1320 " sleeping. 0 (default) means to wait forever. Set to 100-500"
1321 " if kipmid is using up a lot of CPU time.");
1324 static void std_irq_cleanup(struct smi_info
*info
)
1326 if (info
->si_type
== SI_BT
)
1327 /* Disable the interrupt in the BT interface. */
1328 info
->io
.outputb(&info
->io
, IPMI_BT_INTMASK_REG
, 0);
1329 free_irq(info
->irq
, info
);
1332 static int std_irq_setup(struct smi_info
*info
)
1339 if (info
->si_type
== SI_BT
) {
1340 rv
= request_irq(info
->irq
,
1342 IRQF_SHARED
| IRQF_DISABLED
,
1346 /* Enable the interrupt in the BT interface. */
1347 info
->io
.outputb(&info
->io
, IPMI_BT_INTMASK_REG
,
1348 IPMI_BT_INTMASK_ENABLE_IRQ_BIT
);
1350 rv
= request_irq(info
->irq
,
1352 IRQF_SHARED
| IRQF_DISABLED
,
1356 dev_warn(info
->dev
, "%s unable to claim interrupt %d,"
1357 " running polled\n",
1358 DEVICE_NAME
, info
->irq
);
1361 info
->irq_cleanup
= std_irq_cleanup
;
1362 dev_info(info
->dev
, "Using irq %d\n", info
->irq
);
1368 static unsigned char port_inb(struct si_sm_io
*io
, unsigned int offset
)
1370 unsigned int addr
= io
->addr_data
;
1372 return inb(addr
+ (offset
* io
->regspacing
));
1375 static void port_outb(struct si_sm_io
*io
, unsigned int offset
,
1378 unsigned int addr
= io
->addr_data
;
1380 outb(b
, addr
+ (offset
* io
->regspacing
));
1383 static unsigned char port_inw(struct si_sm_io
*io
, unsigned int offset
)
1385 unsigned int addr
= io
->addr_data
;
1387 return (inw(addr
+ (offset
* io
->regspacing
)) >> io
->regshift
) & 0xff;
1390 static void port_outw(struct si_sm_io
*io
, unsigned int offset
,
1393 unsigned int addr
= io
->addr_data
;
1395 outw(b
<< io
->regshift
, addr
+ (offset
* io
->regspacing
));
1398 static unsigned char port_inl(struct si_sm_io
*io
, unsigned int offset
)
1400 unsigned int addr
= io
->addr_data
;
1402 return (inl(addr
+ (offset
* io
->regspacing
)) >> io
->regshift
) & 0xff;
1405 static void port_outl(struct si_sm_io
*io
, unsigned int offset
,
1408 unsigned int addr
= io
->addr_data
;
1410 outl(b
<< io
->regshift
, addr
+(offset
* io
->regspacing
));
1413 static void port_cleanup(struct smi_info
*info
)
1415 unsigned int addr
= info
->io
.addr_data
;
1419 for (idx
= 0; idx
< info
->io_size
; idx
++)
1420 release_region(addr
+ idx
* info
->io
.regspacing
,
1425 static int port_setup(struct smi_info
*info
)
1427 unsigned int addr
= info
->io
.addr_data
;
1433 info
->io_cleanup
= port_cleanup
;
1436 * Figure out the actual inb/inw/inl/etc routine to use based
1437 * upon the register size.
1439 switch (info
->io
.regsize
) {
1441 info
->io
.inputb
= port_inb
;
1442 info
->io
.outputb
= port_outb
;
1445 info
->io
.inputb
= port_inw
;
1446 info
->io
.outputb
= port_outw
;
1449 info
->io
.inputb
= port_inl
;
1450 info
->io
.outputb
= port_outl
;
1453 dev_warn(info
->dev
, "Invalid register size: %d\n",
1459 * Some BIOSes reserve disjoint I/O regions in their ACPI
1460 * tables. This causes problems when trying to register the
1461 * entire I/O region. Therefore we must register each I/O
1464 for (idx
= 0; idx
< info
->io_size
; idx
++) {
1465 if (request_region(addr
+ idx
* info
->io
.regspacing
,
1466 info
->io
.regsize
, DEVICE_NAME
) == NULL
) {
1467 /* Undo allocations */
1469 release_region(addr
+ idx
* info
->io
.regspacing
,
1478 static unsigned char intf_mem_inb(struct si_sm_io
*io
, unsigned int offset
)
1480 return readb((io
->addr
)+(offset
* io
->regspacing
));
1483 static void intf_mem_outb(struct si_sm_io
*io
, unsigned int offset
,
1486 writeb(b
, (io
->addr
)+(offset
* io
->regspacing
));
1489 static unsigned char intf_mem_inw(struct si_sm_io
*io
, unsigned int offset
)
1491 return (readw((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1495 static void intf_mem_outw(struct si_sm_io
*io
, unsigned int offset
,
1498 writeb(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1501 static unsigned char intf_mem_inl(struct si_sm_io
*io
, unsigned int offset
)
1503 return (readl((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1507 static void intf_mem_outl(struct si_sm_io
*io
, unsigned int offset
,
1510 writel(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1514 static unsigned char mem_inq(struct si_sm_io
*io
, unsigned int offset
)
1516 return (readq((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1520 static void mem_outq(struct si_sm_io
*io
, unsigned int offset
,
1523 writeq(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1527 static void mem_cleanup(struct smi_info
*info
)
1529 unsigned long addr
= info
->io
.addr_data
;
1532 if (info
->io
.addr
) {
1533 iounmap(info
->io
.addr
);
1535 mapsize
= ((info
->io_size
* info
->io
.regspacing
)
1536 - (info
->io
.regspacing
- info
->io
.regsize
));
1538 release_mem_region(addr
, mapsize
);
1542 static int mem_setup(struct smi_info
*info
)
1544 unsigned long addr
= info
->io
.addr_data
;
1550 info
->io_cleanup
= mem_cleanup
;
1553 * Figure out the actual readb/readw/readl/etc routine to use based
1554 * upon the register size.
1556 switch (info
->io
.regsize
) {
1558 info
->io
.inputb
= intf_mem_inb
;
1559 info
->io
.outputb
= intf_mem_outb
;
1562 info
->io
.inputb
= intf_mem_inw
;
1563 info
->io
.outputb
= intf_mem_outw
;
1566 info
->io
.inputb
= intf_mem_inl
;
1567 info
->io
.outputb
= intf_mem_outl
;
1571 info
->io
.inputb
= mem_inq
;
1572 info
->io
.outputb
= mem_outq
;
1576 dev_warn(info
->dev
, "Invalid register size: %d\n",
1582 * Calculate the total amount of memory to claim. This is an
1583 * unusual looking calculation, but it avoids claiming any
1584 * more memory than it has to. It will claim everything
1585 * between the first address to the end of the last full
1588 mapsize
= ((info
->io_size
* info
->io
.regspacing
)
1589 - (info
->io
.regspacing
- info
->io
.regsize
));
1591 if (request_mem_region(addr
, mapsize
, DEVICE_NAME
) == NULL
)
1594 info
->io
.addr
= ioremap(addr
, mapsize
);
1595 if (info
->io
.addr
== NULL
) {
1596 release_mem_region(addr
, mapsize
);
1603 * Parms come in as <op1>[:op2[:op3...]]. ops are:
1604 * add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
1612 enum hotmod_op
{ HM_ADD
, HM_REMOVE
};
1613 struct hotmod_vals
{
1617 static struct hotmod_vals hotmod_ops
[] = {
1619 { "remove", HM_REMOVE
},
1622 static struct hotmod_vals hotmod_si
[] = {
1624 { "smic", SI_SMIC
},
1628 static struct hotmod_vals hotmod_as
[] = {
1629 { "mem", IPMI_MEM_ADDR_SPACE
},
1630 { "i/o", IPMI_IO_ADDR_SPACE
},
1634 static int parse_str(struct hotmod_vals
*v
, int *val
, char *name
, char **curr
)
1639 s
= strchr(*curr
, ',');
1641 printk(KERN_WARNING PFX
"No hotmod %s given.\n", name
);
1646 for (i
= 0; hotmod_ops
[i
].name
; i
++) {
1647 if (strcmp(*curr
, v
[i
].name
) == 0) {
1654 printk(KERN_WARNING PFX
"Invalid hotmod %s '%s'\n", name
, *curr
);
1658 static int check_hotmod_int_op(const char *curr
, const char *option
,
1659 const char *name
, int *val
)
1663 if (strcmp(curr
, name
) == 0) {
1665 printk(KERN_WARNING PFX
1666 "No option given for '%s'\n",
1670 *val
= simple_strtoul(option
, &n
, 0);
1671 if ((*n
!= '\0') || (*option
== '\0')) {
1672 printk(KERN_WARNING PFX
1673 "Bad option given for '%s'\n",
1682 static struct smi_info
*smi_info_alloc(void)
1684 struct smi_info
*info
= kzalloc(sizeof(*info
), GFP_KERNEL
);
1687 spin_lock_init(&info
->si_lock
);
1688 spin_lock_init(&info
->msg_lock
);
1693 static int hotmod_handler(const char *val
, struct kernel_param
*kp
)
1695 char *str
= kstrdup(val
, GFP_KERNEL
);
1697 char *next
, *curr
, *s
, *n
, *o
;
1699 enum si_type si_type
;
1709 struct smi_info
*info
;
1714 /* Kill any trailing spaces, as we can get a "\n" from echo. */
1717 while ((ival
>= 0) && isspace(str
[ival
])) {
1722 for (curr
= str
; curr
; curr
= next
) {
1727 ipmb
= 0; /* Choose the default if not specified */
1729 next
= strchr(curr
, ':');
1735 rv
= parse_str(hotmod_ops
, &ival
, "operation", &curr
);
1740 rv
= parse_str(hotmod_si
, &ival
, "interface type", &curr
);
1745 rv
= parse_str(hotmod_as
, &addr_space
, "address space", &curr
);
1749 s
= strchr(curr
, ',');
1754 addr
= simple_strtoul(curr
, &n
, 0);
1755 if ((*n
!= '\0') || (*curr
== '\0')) {
1756 printk(KERN_WARNING PFX
"Invalid hotmod address"
1763 s
= strchr(curr
, ',');
1768 o
= strchr(curr
, '=');
1773 rv
= check_hotmod_int_op(curr
, o
, "rsp", ®spacing
);
1778 rv
= check_hotmod_int_op(curr
, o
, "rsi", ®size
);
1783 rv
= check_hotmod_int_op(curr
, o
, "rsh", ®shift
);
1788 rv
= check_hotmod_int_op(curr
, o
, "irq", &irq
);
1793 rv
= check_hotmod_int_op(curr
, o
, "ipmb", &ipmb
);
1800 printk(KERN_WARNING PFX
1801 "Invalid hotmod option '%s'\n",
1807 info
= smi_info_alloc();
1813 info
->addr_source
= SI_HOTMOD
;
1814 info
->si_type
= si_type
;
1815 info
->io
.addr_data
= addr
;
1816 info
->io
.addr_type
= addr_space
;
1817 if (addr_space
== IPMI_MEM_ADDR_SPACE
)
1818 info
->io_setup
= mem_setup
;
1820 info
->io_setup
= port_setup
;
1822 info
->io
.addr
= NULL
;
1823 info
->io
.regspacing
= regspacing
;
1824 if (!info
->io
.regspacing
)
1825 info
->io
.regspacing
= DEFAULT_REGSPACING
;
1826 info
->io
.regsize
= regsize
;
1827 if (!info
->io
.regsize
)
1828 info
->io
.regsize
= DEFAULT_REGSPACING
;
1829 info
->io
.regshift
= regshift
;
1832 info
->irq_setup
= std_irq_setup
;
1833 info
->slave_addr
= ipmb
;
1835 if (!add_smi(info
)) {
1836 if (try_smi_init(info
))
1837 cleanup_one_si(info
);
1843 struct smi_info
*e
, *tmp_e
;
1845 mutex_lock(&smi_infos_lock
);
1846 list_for_each_entry_safe(e
, tmp_e
, &smi_infos
, link
) {
1847 if (e
->io
.addr_type
!= addr_space
)
1849 if (e
->si_type
!= si_type
)
1851 if (e
->io
.addr_data
== addr
)
1854 mutex_unlock(&smi_infos_lock
);
1863 static void __devinit
hardcode_find_bmc(void)
1866 struct smi_info
*info
;
1868 for (i
= 0; i
< SI_MAX_PARMS
; i
++) {
1869 if (!ports
[i
] && !addrs
[i
])
1872 info
= smi_info_alloc();
1876 info
->addr_source
= SI_HARDCODED
;
1877 printk(KERN_INFO PFX
"probing via hardcoded address\n");
1879 if (!si_type
[i
] || strcmp(si_type
[i
], "kcs") == 0) {
1880 info
->si_type
= SI_KCS
;
1881 } else if (strcmp(si_type
[i
], "smic") == 0) {
1882 info
->si_type
= SI_SMIC
;
1883 } else if (strcmp(si_type
[i
], "bt") == 0) {
1884 info
->si_type
= SI_BT
;
1886 printk(KERN_WARNING PFX
"Interface type specified "
1887 "for interface %d, was invalid: %s\n",
1895 info
->io_setup
= port_setup
;
1896 info
->io
.addr_data
= ports
[i
];
1897 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
1898 } else if (addrs
[i
]) {
1900 info
->io_setup
= mem_setup
;
1901 info
->io
.addr_data
= addrs
[i
];
1902 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
1904 printk(KERN_WARNING PFX
"Interface type specified "
1905 "for interface %d, but port and address were "
1906 "not set or set to zero.\n", i
);
1911 info
->io
.addr
= NULL
;
1912 info
->io
.regspacing
= regspacings
[i
];
1913 if (!info
->io
.regspacing
)
1914 info
->io
.regspacing
= DEFAULT_REGSPACING
;
1915 info
->io
.regsize
= regsizes
[i
];
1916 if (!info
->io
.regsize
)
1917 info
->io
.regsize
= DEFAULT_REGSPACING
;
1918 info
->io
.regshift
= regshifts
[i
];
1919 info
->irq
= irqs
[i
];
1921 info
->irq_setup
= std_irq_setup
;
1922 info
->slave_addr
= slave_addrs
[i
];
1924 if (!add_smi(info
)) {
1925 if (try_smi_init(info
))
1926 cleanup_one_si(info
);
1935 #include <linux/acpi.h>
1938 * Once we get an ACPI failure, we don't try any more, because we go
1939 * through the tables sequentially. Once we don't find a table, there
1942 static int acpi_failure
;
1944 /* For GPE-type interrupts. */
1945 static u32
ipmi_acpi_gpe(acpi_handle gpe_device
,
1946 u32 gpe_number
, void *context
)
1948 struct smi_info
*smi_info
= context
;
1949 unsigned long flags
;
1954 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1956 smi_inc_stat(smi_info
, interrupts
);
1959 do_gettimeofday(&t
);
1960 printk("**ACPI_GPE: %d.%9.9d\n", t
.tv_sec
, t
.tv_usec
);
1962 smi_event_handler(smi_info
, 0);
1963 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1965 return ACPI_INTERRUPT_HANDLED
;
1968 static void acpi_gpe_irq_cleanup(struct smi_info
*info
)
1973 acpi_remove_gpe_handler(NULL
, info
->irq
, &ipmi_acpi_gpe
);
1976 static int acpi_gpe_irq_setup(struct smi_info
*info
)
1983 /* FIXME - is level triggered right? */
1984 status
= acpi_install_gpe_handler(NULL
,
1986 ACPI_GPE_LEVEL_TRIGGERED
,
1989 if (status
!= AE_OK
) {
1990 dev_warn(info
->dev
, "%s unable to claim ACPI GPE %d,"
1991 " running polled\n", DEVICE_NAME
, info
->irq
);
1995 info
->irq_cleanup
= acpi_gpe_irq_cleanup
;
1996 dev_info(info
->dev
, "Using ACPI GPE %d\n", info
->irq
);
2003 * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
2014 s8 CreatorRevision
[4];
2017 s16 SpecificationRevision
;
2020 * Bit 0 - SCI interrupt supported
2021 * Bit 1 - I/O APIC/SAPIC
2026 * If bit 0 of InterruptType is set, then this is the SCI
2027 * interrupt in the GPEx_STS register.
2034 * If bit 1 of InterruptType is set, then this is the I/O
2035 * APIC/SAPIC interrupt.
2037 u32 GlobalSystemInterrupt
;
2039 /* The actual register address. */
2040 struct acpi_generic_address addr
;
2044 s8 spmi_id
[1]; /* A '\0' terminated array starts here. */
2047 static int __devinit
try_init_spmi(struct SPMITable
*spmi
)
2049 struct smi_info
*info
;
2051 if (spmi
->IPMIlegacy
!= 1) {
2052 printk(KERN_INFO PFX
"Bad SPMI legacy %d\n", spmi
->IPMIlegacy
);
2056 info
= smi_info_alloc();
2058 printk(KERN_ERR PFX
"Could not allocate SI data (3)\n");
2062 info
->addr_source
= SI_SPMI
;
2063 printk(KERN_INFO PFX
"probing via SPMI\n");
2065 /* Figure out the interface type. */
2066 switch (spmi
->InterfaceType
) {
2068 info
->si_type
= SI_KCS
;
2071 info
->si_type
= SI_SMIC
;
2074 info
->si_type
= SI_BT
;
2077 printk(KERN_INFO PFX
"Unknown ACPI/SPMI SI type %d\n",
2078 spmi
->InterfaceType
);
2083 if (spmi
->InterruptType
& 1) {
2084 /* We've got a GPE interrupt. */
2085 info
->irq
= spmi
->GPE
;
2086 info
->irq_setup
= acpi_gpe_irq_setup
;
2087 } else if (spmi
->InterruptType
& 2) {
2088 /* We've got an APIC/SAPIC interrupt. */
2089 info
->irq
= spmi
->GlobalSystemInterrupt
;
2090 info
->irq_setup
= std_irq_setup
;
2092 /* Use the default interrupt setting. */
2094 info
->irq_setup
= NULL
;
2097 if (spmi
->addr
.bit_width
) {
2098 /* A (hopefully) properly formed register bit width. */
2099 info
->io
.regspacing
= spmi
->addr
.bit_width
/ 8;
2101 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2103 info
->io
.regsize
= info
->io
.regspacing
;
2104 info
->io
.regshift
= spmi
->addr
.bit_offset
;
2106 if (spmi
->addr
.space_id
== ACPI_ADR_SPACE_SYSTEM_MEMORY
) {
2107 info
->io_setup
= mem_setup
;
2108 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2109 } else if (spmi
->addr
.space_id
== ACPI_ADR_SPACE_SYSTEM_IO
) {
2110 info
->io_setup
= port_setup
;
2111 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2114 printk(KERN_WARNING PFX
"Unknown ACPI I/O Address type\n");
2117 info
->io
.addr_data
= spmi
->addr
.address
;
2119 pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
2120 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ? "io" : "mem",
2121 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2130 static void __devinit
spmi_find_bmc(void)
2133 struct SPMITable
*spmi
;
2142 for (i
= 0; ; i
++) {
2143 status
= acpi_get_table(ACPI_SIG_SPMI
, i
+1,
2144 (struct acpi_table_header
**)&spmi
);
2145 if (status
!= AE_OK
)
2148 try_init_spmi(spmi
);
2152 static int __devinit
ipmi_pnp_probe(struct pnp_dev
*dev
,
2153 const struct pnp_device_id
*dev_id
)
2155 struct acpi_device
*acpi_dev
;
2156 struct smi_info
*info
;
2157 struct resource
*res
, *res_second
;
2160 unsigned long long tmp
;
2162 acpi_dev
= pnp_acpi_device(dev
);
2166 info
= smi_info_alloc();
2170 info
->addr_source
= SI_ACPI
;
2171 printk(KERN_INFO PFX
"probing via ACPI\n");
2173 handle
= acpi_dev
->handle
;
2174 info
->addr_info
.acpi_info
.acpi_handle
= handle
;
2176 /* _IFT tells us the interface type: KCS, BT, etc */
2177 status
= acpi_evaluate_integer(handle
, "_IFT", NULL
, &tmp
);
2178 if (ACPI_FAILURE(status
))
2183 info
->si_type
= SI_KCS
;
2186 info
->si_type
= SI_SMIC
;
2189 info
->si_type
= SI_BT
;
2192 dev_info(&dev
->dev
, "unknown IPMI type %lld\n", tmp
);
2196 res
= pnp_get_resource(dev
, IORESOURCE_IO
, 0);
2198 info
->io_setup
= port_setup
;
2199 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2201 res
= pnp_get_resource(dev
, IORESOURCE_MEM
, 0);
2203 info
->io_setup
= mem_setup
;
2204 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2208 dev_err(&dev
->dev
, "no I/O or memory address\n");
2211 info
->io
.addr_data
= res
->start
;
2213 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2214 res_second
= pnp_get_resource(dev
,
2215 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ?
2216 IORESOURCE_IO
: IORESOURCE_MEM
,
2219 if (res_second
->start
> info
->io
.addr_data
)
2220 info
->io
.regspacing
= res_second
->start
- info
->io
.addr_data
;
2222 info
->io
.regsize
= DEFAULT_REGSPACING
;
2223 info
->io
.regshift
= 0;
2225 /* If _GPE exists, use it; otherwise use standard interrupts */
2226 status
= acpi_evaluate_integer(handle
, "_GPE", NULL
, &tmp
);
2227 if (ACPI_SUCCESS(status
)) {
2229 info
->irq_setup
= acpi_gpe_irq_setup
;
2230 } else if (pnp_irq_valid(dev
, 0)) {
2231 info
->irq
= pnp_irq(dev
, 0);
2232 info
->irq_setup
= std_irq_setup
;
2235 info
->dev
= &dev
->dev
;
2236 pnp_set_drvdata(dev
, info
);
2238 dev_info(info
->dev
, "%pR regsize %d spacing %d irq %d\n",
2239 res
, info
->io
.regsize
, info
->io
.regspacing
,
2252 static void __devexit
ipmi_pnp_remove(struct pnp_dev
*dev
)
2254 struct smi_info
*info
= pnp_get_drvdata(dev
);
2256 cleanup_one_si(info
);
2259 static const struct pnp_device_id pnp_dev_table
[] = {
2264 static struct pnp_driver ipmi_pnp_driver
= {
2265 .name
= DEVICE_NAME
,
2266 .probe
= ipmi_pnp_probe
,
2267 .remove
= __devexit_p(ipmi_pnp_remove
),
2268 .id_table
= pnp_dev_table
,
2273 struct dmi_ipmi_data
{
2276 unsigned long base_addr
;
2282 static int __devinit
decode_dmi(const struct dmi_header
*dm
,
2283 struct dmi_ipmi_data
*dmi
)
2285 const u8
*data
= (const u8
*)dm
;
2286 unsigned long base_addr
;
2288 u8 len
= dm
->length
;
2290 dmi
->type
= data
[4];
2292 memcpy(&base_addr
, data
+8, sizeof(unsigned long));
2294 if (base_addr
& 1) {
2296 base_addr
&= 0xFFFE;
2297 dmi
->addr_space
= IPMI_IO_ADDR_SPACE
;
2300 dmi
->addr_space
= IPMI_MEM_ADDR_SPACE
;
2302 /* If bit 4 of byte 0x10 is set, then the lsb for the address
2304 dmi
->base_addr
= base_addr
| ((data
[0x10] & 0x10) >> 4);
2306 dmi
->irq
= data
[0x11];
2308 /* The top two bits of byte 0x10 hold the register spacing. */
2309 reg_spacing
= (data
[0x10] & 0xC0) >> 6;
2310 switch (reg_spacing
) {
2311 case 0x00: /* Byte boundaries */
2314 case 0x01: /* 32-bit boundaries */
2317 case 0x02: /* 16-byte boundaries */
2321 /* Some other interface, just ignore it. */
2327 * Note that technically, the lower bit of the base
2328 * address should be 1 if the address is I/O and 0 if
2329 * the address is in memory. So many systems get that
2330 * wrong (and all that I have seen are I/O) so we just
2331 * ignore that bit and assume I/O. Systems that use
2332 * memory should use the newer spec, anyway.
2334 dmi
->base_addr
= base_addr
& 0xfffe;
2335 dmi
->addr_space
= IPMI_IO_ADDR_SPACE
;
2339 dmi
->slave_addr
= data
[6];
2344 static void __devinit
try_init_dmi(struct dmi_ipmi_data
*ipmi_data
)
2346 struct smi_info
*info
;
2348 info
= smi_info_alloc();
2350 printk(KERN_ERR PFX
"Could not allocate SI data\n");
2354 info
->addr_source
= SI_SMBIOS
;
2355 printk(KERN_INFO PFX
"probing via SMBIOS\n");
2357 switch (ipmi_data
->type
) {
2358 case 0x01: /* KCS */
2359 info
->si_type
= SI_KCS
;
2361 case 0x02: /* SMIC */
2362 info
->si_type
= SI_SMIC
;
2365 info
->si_type
= SI_BT
;
2372 switch (ipmi_data
->addr_space
) {
2373 case IPMI_MEM_ADDR_SPACE
:
2374 info
->io_setup
= mem_setup
;
2375 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2378 case IPMI_IO_ADDR_SPACE
:
2379 info
->io_setup
= port_setup
;
2380 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2385 printk(KERN_WARNING PFX
"Unknown SMBIOS I/O Address type: %d\n",
2386 ipmi_data
->addr_space
);
2389 info
->io
.addr_data
= ipmi_data
->base_addr
;
2391 info
->io
.regspacing
= ipmi_data
->offset
;
2392 if (!info
->io
.regspacing
)
2393 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2394 info
->io
.regsize
= DEFAULT_REGSPACING
;
2395 info
->io
.regshift
= 0;
2397 info
->slave_addr
= ipmi_data
->slave_addr
;
2399 info
->irq
= ipmi_data
->irq
;
2401 info
->irq_setup
= std_irq_setup
;
2403 pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
2404 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ? "io" : "mem",
2405 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2412 static void __devinit
dmi_find_bmc(void)
2414 const struct dmi_device
*dev
= NULL
;
2415 struct dmi_ipmi_data data
;
2418 while ((dev
= dmi_find_device(DMI_DEV_TYPE_IPMI
, NULL
, dev
))) {
2419 memset(&data
, 0, sizeof(data
));
2420 rv
= decode_dmi((const struct dmi_header
*) dev
->device_data
,
2423 try_init_dmi(&data
);
2426 #endif /* CONFIG_DMI */
2430 #define PCI_ERMC_CLASSCODE 0x0C0700
2431 #define PCI_ERMC_CLASSCODE_MASK 0xffffff00
2432 #define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
2433 #define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
2434 #define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
2435 #define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
2437 #define PCI_HP_VENDOR_ID 0x103C
2438 #define PCI_MMC_DEVICE_ID 0x121A
2439 #define PCI_MMC_ADDR_CW 0x10
2441 static void ipmi_pci_cleanup(struct smi_info
*info
)
2443 struct pci_dev
*pdev
= info
->addr_source_data
;
2445 pci_disable_device(pdev
);
2448 static int __devinit
ipmi_pci_probe(struct pci_dev
*pdev
,
2449 const struct pci_device_id
*ent
)
2452 int class_type
= pdev
->class & PCI_ERMC_CLASSCODE_TYPE_MASK
;
2453 struct smi_info
*info
;
2455 info
= smi_info_alloc();
2459 info
->addr_source
= SI_PCI
;
2460 dev_info(&pdev
->dev
, "probing via PCI");
2462 switch (class_type
) {
2463 case PCI_ERMC_CLASSCODE_TYPE_SMIC
:
2464 info
->si_type
= SI_SMIC
;
2467 case PCI_ERMC_CLASSCODE_TYPE_KCS
:
2468 info
->si_type
= SI_KCS
;
2471 case PCI_ERMC_CLASSCODE_TYPE_BT
:
2472 info
->si_type
= SI_BT
;
2477 dev_info(&pdev
->dev
, "Unknown IPMI type: %d\n", class_type
);
2481 rv
= pci_enable_device(pdev
);
2483 dev_err(&pdev
->dev
, "couldn't enable PCI device\n");
2488 info
->addr_source_cleanup
= ipmi_pci_cleanup
;
2489 info
->addr_source_data
= pdev
;
2491 if (pci_resource_flags(pdev
, 0) & IORESOURCE_IO
) {
2492 info
->io_setup
= port_setup
;
2493 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2495 info
->io_setup
= mem_setup
;
2496 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2498 info
->io
.addr_data
= pci_resource_start(pdev
, 0);
2500 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2501 info
->io
.regsize
= DEFAULT_REGSPACING
;
2502 info
->io
.regshift
= 0;
2504 info
->irq
= pdev
->irq
;
2506 info
->irq_setup
= std_irq_setup
;
2508 info
->dev
= &pdev
->dev
;
2509 pci_set_drvdata(pdev
, info
);
2511 dev_info(&pdev
->dev
, "%pR regsize %d spacing %d irq %d\n",
2512 &pdev
->resource
[0], info
->io
.regsize
, info
->io
.regspacing
,
2521 static void __devexit
ipmi_pci_remove(struct pci_dev
*pdev
)
2523 struct smi_info
*info
= pci_get_drvdata(pdev
);
2524 cleanup_one_si(info
);
2528 static int ipmi_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
2533 static int ipmi_pci_resume(struct pci_dev
*pdev
)
2539 static struct pci_device_id ipmi_pci_devices
[] = {
2540 { PCI_DEVICE(PCI_HP_VENDOR_ID
, PCI_MMC_DEVICE_ID
) },
2541 { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE
, PCI_ERMC_CLASSCODE_MASK
) },
2544 MODULE_DEVICE_TABLE(pci
, ipmi_pci_devices
);
2546 static struct pci_driver ipmi_pci_driver
= {
2547 .name
= DEVICE_NAME
,
2548 .id_table
= ipmi_pci_devices
,
2549 .probe
= ipmi_pci_probe
,
2550 .remove
= __devexit_p(ipmi_pci_remove
),
2552 .suspend
= ipmi_pci_suspend
,
2553 .resume
= ipmi_pci_resume
,
2556 #endif /* CONFIG_PCI */
2559 #ifdef CONFIG_PPC_OF
2560 static int __devinit
ipmi_of_probe(struct platform_device
*dev
,
2561 const struct of_device_id
*match
)
2563 struct smi_info
*info
;
2564 struct resource resource
;
2565 const __be32
*regsize
, *regspacing
, *regshift
;
2566 struct device_node
*np
= dev
->dev
.of_node
;
2570 dev_info(&dev
->dev
, "probing via device tree\n");
2572 ret
= of_address_to_resource(np
, 0, &resource
);
2574 dev_warn(&dev
->dev
, PFX
"invalid address from OF\n");
2578 regsize
= of_get_property(np
, "reg-size", &proplen
);
2579 if (regsize
&& proplen
!= 4) {
2580 dev_warn(&dev
->dev
, PFX
"invalid regsize from OF\n");
2584 regspacing
= of_get_property(np
, "reg-spacing", &proplen
);
2585 if (regspacing
&& proplen
!= 4) {
2586 dev_warn(&dev
->dev
, PFX
"invalid regspacing from OF\n");
2590 regshift
= of_get_property(np
, "reg-shift", &proplen
);
2591 if (regshift
&& proplen
!= 4) {
2592 dev_warn(&dev
->dev
, PFX
"invalid regshift from OF\n");
2596 info
= smi_info_alloc();
2600 "could not allocate memory for OF probe\n");
2604 info
->si_type
= (enum si_type
) match
->data
;
2605 info
->addr_source
= SI_DEVICETREE
;
2606 info
->irq_setup
= std_irq_setup
;
2608 if (resource
.flags
& IORESOURCE_IO
) {
2609 info
->io_setup
= port_setup
;
2610 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2612 info
->io_setup
= mem_setup
;
2613 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2616 info
->io
.addr_data
= resource
.start
;
2618 info
->io
.regsize
= regsize
? be32_to_cpup(regsize
) : DEFAULT_REGSIZE
;
2619 info
->io
.regspacing
= regspacing
? be32_to_cpup(regspacing
) : DEFAULT_REGSPACING
;
2620 info
->io
.regshift
= regshift
? be32_to_cpup(regshift
) : 0;
2622 info
->irq
= irq_of_parse_and_map(dev
->dev
.of_node
, 0);
2623 info
->dev
= &dev
->dev
;
2625 dev_dbg(&dev
->dev
, "addr 0x%lx regsize %d spacing %d irq %d\n",
2626 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2629 dev_set_drvdata(&dev
->dev
, info
);
2631 if (add_smi(info
)) {
2639 static int __devexit
ipmi_of_remove(struct platform_device
*dev
)
2641 cleanup_one_si(dev_get_drvdata(&dev
->dev
));
2645 static struct of_device_id ipmi_match
[] =
2647 { .type
= "ipmi", .compatible
= "ipmi-kcs",
2648 .data
= (void *)(unsigned long) SI_KCS
},
2649 { .type
= "ipmi", .compatible
= "ipmi-smic",
2650 .data
= (void *)(unsigned long) SI_SMIC
},
2651 { .type
= "ipmi", .compatible
= "ipmi-bt",
2652 .data
= (void *)(unsigned long) SI_BT
},
2656 static struct of_platform_driver ipmi_of_platform_driver
= {
2659 .owner
= THIS_MODULE
,
2660 .of_match_table
= ipmi_match
,
2662 .probe
= ipmi_of_probe
,
2663 .remove
= __devexit_p(ipmi_of_remove
),
2665 #endif /* CONFIG_PPC_OF */
2667 static int wait_for_msg_done(struct smi_info
*smi_info
)
2669 enum si_sm_result smi_result
;
2671 smi_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
2673 if (smi_result
== SI_SM_CALL_WITH_DELAY
||
2674 smi_result
== SI_SM_CALL_WITH_TICK_DELAY
) {
2675 schedule_timeout_uninterruptible(1);
2676 smi_result
= smi_info
->handlers
->event(
2677 smi_info
->si_sm
, 100);
2678 } else if (smi_result
== SI_SM_CALL_WITHOUT_DELAY
) {
2679 smi_result
= smi_info
->handlers
->event(
2680 smi_info
->si_sm
, 0);
2684 if (smi_result
== SI_SM_HOSED
)
2686 * We couldn't get the state machine to run, so whatever's at
2687 * the port is probably not an IPMI SMI interface.
2694 static int try_get_dev_id(struct smi_info
*smi_info
)
2696 unsigned char msg
[2];
2697 unsigned char *resp
;
2698 unsigned long resp_len
;
2701 resp
= kmalloc(IPMI_MAX_MSG_LENGTH
, GFP_KERNEL
);
2706 * Do a Get Device ID command, since it comes back with some
2709 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2710 msg
[1] = IPMI_GET_DEVICE_ID_CMD
;
2711 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
2713 rv
= wait_for_msg_done(smi_info
);
2717 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2718 resp
, IPMI_MAX_MSG_LENGTH
);
2720 /* Check and record info from the get device id, in case we need it. */
2721 rv
= ipmi_demangle_device_id(resp
, resp_len
, &smi_info
->device_id
);
2728 static int try_enable_event_buffer(struct smi_info
*smi_info
)
2730 unsigned char msg
[3];
2731 unsigned char *resp
;
2732 unsigned long resp_len
;
2735 resp
= kmalloc(IPMI_MAX_MSG_LENGTH
, GFP_KERNEL
);
2739 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2740 msg
[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD
;
2741 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
2743 rv
= wait_for_msg_done(smi_info
);
2745 printk(KERN_WARNING PFX
"Error getting response from get"
2746 " global enables command, the event buffer is not"
2751 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2752 resp
, IPMI_MAX_MSG_LENGTH
);
2755 resp
[0] != (IPMI_NETFN_APP_REQUEST
| 1) << 2 ||
2756 resp
[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD
||
2758 printk(KERN_WARNING PFX
"Invalid return from get global"
2759 " enables command, cannot enable the event buffer.\n");
2764 if (resp
[3] & IPMI_BMC_EVT_MSG_BUFF
)
2765 /* buffer is already enabled, nothing to do. */
2768 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2769 msg
[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD
;
2770 msg
[2] = resp
[3] | IPMI_BMC_EVT_MSG_BUFF
;
2771 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 3);
2773 rv
= wait_for_msg_done(smi_info
);
2775 printk(KERN_WARNING PFX
"Error getting response from set"
2776 " global, enables command, the event buffer is not"
2781 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2782 resp
, IPMI_MAX_MSG_LENGTH
);
2785 resp
[0] != (IPMI_NETFN_APP_REQUEST
| 1) << 2 ||
2786 resp
[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD
) {
2787 printk(KERN_WARNING PFX
"Invalid return from get global,"
2788 "enables command, not enable the event buffer.\n");
2795 * An error when setting the event buffer bit means
2796 * that the event buffer is not supported.
2804 static int type_file_read_proc(char *page
, char **start
, off_t off
,
2805 int count
, int *eof
, void *data
)
2807 struct smi_info
*smi
= data
;
2809 return sprintf(page
, "%s\n", si_to_str
[smi
->si_type
]);
2812 static int stat_file_read_proc(char *page
, char **start
, off_t off
,
2813 int count
, int *eof
, void *data
)
2815 char *out
= (char *) page
;
2816 struct smi_info
*smi
= data
;
2818 out
+= sprintf(out
, "interrupts_enabled: %d\n",
2819 smi
->irq
&& !smi
->interrupt_disabled
);
2820 out
+= sprintf(out
, "short_timeouts: %u\n",
2821 smi_get_stat(smi
, short_timeouts
));
2822 out
+= sprintf(out
, "long_timeouts: %u\n",
2823 smi_get_stat(smi
, long_timeouts
));
2824 out
+= sprintf(out
, "idles: %u\n",
2825 smi_get_stat(smi
, idles
));
2826 out
+= sprintf(out
, "interrupts: %u\n",
2827 smi_get_stat(smi
, interrupts
));
2828 out
+= sprintf(out
, "attentions: %u\n",
2829 smi_get_stat(smi
, attentions
));
2830 out
+= sprintf(out
, "flag_fetches: %u\n",
2831 smi_get_stat(smi
, flag_fetches
));
2832 out
+= sprintf(out
, "hosed_count: %u\n",
2833 smi_get_stat(smi
, hosed_count
));
2834 out
+= sprintf(out
, "complete_transactions: %u\n",
2835 smi_get_stat(smi
, complete_transactions
));
2836 out
+= sprintf(out
, "events: %u\n",
2837 smi_get_stat(smi
, events
));
2838 out
+= sprintf(out
, "watchdog_pretimeouts: %u\n",
2839 smi_get_stat(smi
, watchdog_pretimeouts
));
2840 out
+= sprintf(out
, "incoming_messages: %u\n",
2841 smi_get_stat(smi
, incoming_messages
));
2846 static int param_read_proc(char *page
, char **start
, off_t off
,
2847 int count
, int *eof
, void *data
)
2849 struct smi_info
*smi
= data
;
2851 return sprintf(page
,
2852 "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
2853 si_to_str
[smi
->si_type
],
2854 addr_space_to_str
[smi
->io
.addr_type
],
2864 * oem_data_avail_to_receive_msg_avail
2865 * @info - smi_info structure with msg_flags set
2867 * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
2868 * Returns 1 indicating need to re-run handle_flags().
2870 static int oem_data_avail_to_receive_msg_avail(struct smi_info
*smi_info
)
2872 smi_info
->msg_flags
= ((smi_info
->msg_flags
& ~OEM_DATA_AVAIL
) |
2878 * setup_dell_poweredge_oem_data_handler
2879 * @info - smi_info.device_id must be populated
2881 * Systems that match, but have firmware version < 1.40 may assert
2882 * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
2883 * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL
2884 * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
2885 * as RECEIVE_MSG_AVAIL instead.
2887 * As Dell has no plans to release IPMI 1.5 firmware that *ever*
2888 * assert the OEM[012] bits, and if it did, the driver would have to
2889 * change to handle that properly, we don't actually check for the
2891 * Device ID = 0x20 BMC on PowerEdge 8G servers
2892 * Device Revision = 0x80
2893 * Firmware Revision1 = 0x01 BMC version 1.40
2894 * Firmware Revision2 = 0x40 BCD encoded
2895 * IPMI Version = 0x51 IPMI 1.5
2896 * Manufacturer ID = A2 02 00 Dell IANA
2898 * Additionally, PowerEdge systems with IPMI < 1.5 may also assert
2899 * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
2902 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20
2903 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
2904 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
2905 #define DELL_IANA_MFR_ID 0x0002a2
2906 static void setup_dell_poweredge_oem_data_handler(struct smi_info
*smi_info
)
2908 struct ipmi_device_id
*id
= &smi_info
->device_id
;
2909 if (id
->manufacturer_id
== DELL_IANA_MFR_ID
) {
2910 if (id
->device_id
== DELL_POWEREDGE_8G_BMC_DEVICE_ID
&&
2911 id
->device_revision
== DELL_POWEREDGE_8G_BMC_DEVICE_REV
&&
2912 id
->ipmi_version
== DELL_POWEREDGE_8G_BMC_IPMI_VERSION
) {
2913 smi_info
->oem_data_avail_handler
=
2914 oem_data_avail_to_receive_msg_avail
;
2915 } else if (ipmi_version_major(id
) < 1 ||
2916 (ipmi_version_major(id
) == 1 &&
2917 ipmi_version_minor(id
) < 5)) {
2918 smi_info
->oem_data_avail_handler
=
2919 oem_data_avail_to_receive_msg_avail
;
2924 #define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
2925 static void return_hosed_msg_badsize(struct smi_info
*smi_info
)
2927 struct ipmi_smi_msg
*msg
= smi_info
->curr_msg
;
2929 /* Make it a reponse */
2930 msg
->rsp
[0] = msg
->data
[0] | 4;
2931 msg
->rsp
[1] = msg
->data
[1];
2932 msg
->rsp
[2] = CANNOT_RETURN_REQUESTED_LENGTH
;
2934 smi_info
->curr_msg
= NULL
;
2935 deliver_recv_msg(smi_info
, msg
);
2939 * dell_poweredge_bt_xaction_handler
2940 * @info - smi_info.device_id must be populated
2942 * Dell PowerEdge servers with the BT interface (x6xx and 1750) will
2943 * not respond to a Get SDR command if the length of the data
2944 * requested is exactly 0x3A, which leads to command timeouts and no
2945 * data returned. This intercepts such commands, and causes userspace
2946 * callers to try again with a different-sized buffer, which succeeds.
2949 #define STORAGE_NETFN 0x0A
2950 #define STORAGE_CMD_GET_SDR 0x23
2951 static int dell_poweredge_bt_xaction_handler(struct notifier_block
*self
,
2952 unsigned long unused
,
2955 struct smi_info
*smi_info
= in
;
2956 unsigned char *data
= smi_info
->curr_msg
->data
;
2957 unsigned int size
= smi_info
->curr_msg
->data_size
;
2959 (data
[0]>>2) == STORAGE_NETFN
&&
2960 data
[1] == STORAGE_CMD_GET_SDR
&&
2962 return_hosed_msg_badsize(smi_info
);
2968 static struct notifier_block dell_poweredge_bt_xaction_notifier
= {
2969 .notifier_call
= dell_poweredge_bt_xaction_handler
,
2973 * setup_dell_poweredge_bt_xaction_handler
2974 * @info - smi_info.device_id must be filled in already
2976 * Fills in smi_info.device_id.start_transaction_pre_hook
2977 * when we know what function to use there.
2980 setup_dell_poweredge_bt_xaction_handler(struct smi_info
*smi_info
)
2982 struct ipmi_device_id
*id
= &smi_info
->device_id
;
2983 if (id
->manufacturer_id
== DELL_IANA_MFR_ID
&&
2984 smi_info
->si_type
== SI_BT
)
2985 register_xaction_notifier(&dell_poweredge_bt_xaction_notifier
);
2989 * setup_oem_data_handler
2990 * @info - smi_info.device_id must be filled in already
2992 * Fills in smi_info.device_id.oem_data_available_handler
2993 * when we know what function to use there.
2996 static void setup_oem_data_handler(struct smi_info
*smi_info
)
2998 setup_dell_poweredge_oem_data_handler(smi_info
);
3001 static void setup_xaction_handlers(struct smi_info
*smi_info
)
3003 setup_dell_poweredge_bt_xaction_handler(smi_info
);
3006 static inline void wait_for_timer_and_thread(struct smi_info
*smi_info
)
3008 if (smi_info
->intf
) {
3010 * The timer and thread are only running if the
3011 * interface has been started up and registered.
3013 if (smi_info
->thread
!= NULL
)
3014 kthread_stop(smi_info
->thread
);
3015 del_timer_sync(&smi_info
->si_timer
);
3019 static __devinitdata
struct ipmi_default_vals
3025 { .type
= SI_KCS
, .port
= 0xca2 },
3026 { .type
= SI_SMIC
, .port
= 0xca9 },
3027 { .type
= SI_BT
, .port
= 0xe4 },
3031 static void __devinit
default_find_bmc(void)
3033 struct smi_info
*info
;
3036 for (i
= 0; ; i
++) {
3037 if (!ipmi_defaults
[i
].port
)
3040 if (check_legacy_ioport(ipmi_defaults
[i
].port
))
3043 info
= smi_info_alloc();
3047 info
->addr_source
= SI_DEFAULT
;
3049 info
->si_type
= ipmi_defaults
[i
].type
;
3050 info
->io_setup
= port_setup
;
3051 info
->io
.addr_data
= ipmi_defaults
[i
].port
;
3052 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
3054 info
->io
.addr
= NULL
;
3055 info
->io
.regspacing
= DEFAULT_REGSPACING
;
3056 info
->io
.regsize
= DEFAULT_REGSPACING
;
3057 info
->io
.regshift
= 0;
3059 if (add_smi(info
) == 0) {
3060 if ((try_smi_init(info
)) == 0) {
3062 printk(KERN_INFO PFX
"Found default %s"
3063 " state machine at %s address 0x%lx\n",
3064 si_to_str
[info
->si_type
],
3065 addr_space_to_str
[info
->io
.addr_type
],
3066 info
->io
.addr_data
);
3068 cleanup_one_si(info
);
3075 static int is_new_interface(struct smi_info
*info
)
3079 list_for_each_entry(e
, &smi_infos
, link
) {
3080 if (e
->io
.addr_type
!= info
->io
.addr_type
)
3082 if (e
->io
.addr_data
== info
->io
.addr_data
)
3089 static int add_smi(struct smi_info
*new_smi
)
3093 printk(KERN_INFO PFX
"Adding %s-specified %s state machine",
3094 ipmi_addr_src_to_str
[new_smi
->addr_source
],
3095 si_to_str
[new_smi
->si_type
]);
3096 mutex_lock(&smi_infos_lock
);
3097 if (!is_new_interface(new_smi
)) {
3098 printk(KERN_CONT
" duplicate interface\n");
3103 printk(KERN_CONT
"\n");
3105 /* So we know not to free it unless we have allocated one. */
3106 new_smi
->intf
= NULL
;
3107 new_smi
->si_sm
= NULL
;
3108 new_smi
->handlers
= NULL
;
3110 list_add_tail(&new_smi
->link
, &smi_infos
);
3113 mutex_unlock(&smi_infos_lock
);
3117 static int try_smi_init(struct smi_info
*new_smi
)
3122 printk(KERN_INFO PFX
"Trying %s-specified %s state"
3123 " machine at %s address 0x%lx, slave address 0x%x,"
3125 ipmi_addr_src_to_str
[new_smi
->addr_source
],
3126 si_to_str
[new_smi
->si_type
],
3127 addr_space_to_str
[new_smi
->io
.addr_type
],
3128 new_smi
->io
.addr_data
,
3129 new_smi
->slave_addr
, new_smi
->irq
);
3131 switch (new_smi
->si_type
) {
3133 new_smi
->handlers
= &kcs_smi_handlers
;
3137 new_smi
->handlers
= &smic_smi_handlers
;
3141 new_smi
->handlers
= &bt_smi_handlers
;
3145 /* No support for anything else yet. */
3150 /* Allocate the state machine's data and initialize it. */
3151 new_smi
->si_sm
= kmalloc(new_smi
->handlers
->size(), GFP_KERNEL
);
3152 if (!new_smi
->si_sm
) {
3154 "Could not allocate state machine memory\n");
3158 new_smi
->io_size
= new_smi
->handlers
->init_data(new_smi
->si_sm
,
3161 /* Now that we know the I/O size, we can set up the I/O. */
3162 rv
= new_smi
->io_setup(new_smi
);
3164 printk(KERN_ERR PFX
"Could not set up I/O space\n");
3168 /* Do low-level detection first. */
3169 if (new_smi
->handlers
->detect(new_smi
->si_sm
)) {
3170 if (new_smi
->addr_source
)
3171 printk(KERN_INFO PFX
"Interface detection failed\n");
3177 * Attempt a get device id command. If it fails, we probably
3178 * don't have a BMC here.
3180 rv
= try_get_dev_id(new_smi
);
3182 if (new_smi
->addr_source
)
3183 printk(KERN_INFO PFX
"There appears to be no BMC"
3184 " at this location\n");
3188 setup_oem_data_handler(new_smi
);
3189 setup_xaction_handlers(new_smi
);
3191 INIT_LIST_HEAD(&(new_smi
->xmit_msgs
));
3192 INIT_LIST_HEAD(&(new_smi
->hp_xmit_msgs
));
3193 new_smi
->curr_msg
= NULL
;
3194 atomic_set(&new_smi
->req_events
, 0);
3195 new_smi
->run_to_completion
= 0;
3196 for (i
= 0; i
< SI_NUM_STATS
; i
++)
3197 atomic_set(&new_smi
->stats
[i
], 0);
3199 new_smi
->interrupt_disabled
= 1;
3200 atomic_set(&new_smi
->stop_operation
, 0);
3201 new_smi
->intf_num
= smi_num
;
3204 rv
= try_enable_event_buffer(new_smi
);
3206 new_smi
->has_event_buffer
= 1;
3209 * Start clearing the flags before we enable interrupts or the
3210 * timer to avoid racing with the timer.
3212 start_clear_flags(new_smi
);
3213 /* IRQ is defined to be set when non-zero. */
3215 new_smi
->si_state
= SI_CLEARING_FLAGS_THEN_SET_IRQ
;
3217 if (!new_smi
->dev
) {
3219 * If we don't already have a device from something
3220 * else (like PCI), then register a new one.
3222 new_smi
->pdev
= platform_device_alloc("ipmi_si",
3224 if (!new_smi
->pdev
) {
3226 "Unable to allocate platform device\n");
3229 new_smi
->dev
= &new_smi
->pdev
->dev
;
3230 new_smi
->dev
->driver
= &ipmi_driver
.driver
;
3232 rv
= platform_device_add(new_smi
->pdev
);
3235 "Unable to register system interface device:"
3240 new_smi
->dev_registered
= 1;
3243 rv
= ipmi_register_smi(&handlers
,
3245 &new_smi
->device_id
,
3248 new_smi
->slave_addr
);
3250 dev_err(new_smi
->dev
, "Unable to register device: error %d\n",
3252 goto out_err_stop_timer
;
3255 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "type",
3256 type_file_read_proc
,
3259 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3260 goto out_err_stop_timer
;
3263 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "si_stats",
3264 stat_file_read_proc
,
3267 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3268 goto out_err_stop_timer
;
3271 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "params",
3275 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3276 goto out_err_stop_timer
;
3279 dev_info(new_smi
->dev
, "IPMI %s interface initialized\n",
3280 si_to_str
[new_smi
->si_type
]);
3285 atomic_inc(&new_smi
->stop_operation
);
3286 wait_for_timer_and_thread(new_smi
);
3289 new_smi
->interrupt_disabled
= 1;
3291 if (new_smi
->intf
) {
3292 ipmi_unregister_smi(new_smi
->intf
);
3293 new_smi
->intf
= NULL
;
3296 if (new_smi
->irq_cleanup
) {
3297 new_smi
->irq_cleanup(new_smi
);
3298 new_smi
->irq_cleanup
= NULL
;
3302 * Wait until we know that we are out of any interrupt
3303 * handlers might have been running before we freed the
3306 synchronize_sched();
3308 if (new_smi
->si_sm
) {
3309 if (new_smi
->handlers
)
3310 new_smi
->handlers
->cleanup(new_smi
->si_sm
);
3311 kfree(new_smi
->si_sm
);
3312 new_smi
->si_sm
= NULL
;
3314 if (new_smi
->addr_source_cleanup
) {
3315 new_smi
->addr_source_cleanup(new_smi
);
3316 new_smi
->addr_source_cleanup
= NULL
;
3318 if (new_smi
->io_cleanup
) {
3319 new_smi
->io_cleanup(new_smi
);
3320 new_smi
->io_cleanup
= NULL
;
3323 if (new_smi
->dev_registered
) {
3324 platform_device_unregister(new_smi
->pdev
);
3325 new_smi
->dev_registered
= 0;
3331 static int __devinit
init_ipmi_si(void)
3337 enum ipmi_addr_src type
= SI_INVALID
;
3343 /* Register the device drivers. */
3344 rv
= driver_register(&ipmi_driver
.driver
);
3346 printk(KERN_ERR PFX
"Unable to register driver: %d\n", rv
);
3351 /* Parse out the si_type string into its components. */
3354 for (i
= 0; (i
< SI_MAX_PARMS
) && (*str
!= '\0'); i
++) {
3356 str
= strchr(str
, ',');
3366 printk(KERN_INFO
"IPMI System Interface driver.\n");
3368 hardcode_find_bmc();
3370 /* If the user gave us a device, they presumably want us to use it */
3371 mutex_lock(&smi_infos_lock
);
3372 if (!list_empty(&smi_infos
)) {
3373 mutex_unlock(&smi_infos_lock
);
3376 mutex_unlock(&smi_infos_lock
);
3379 rv
= pci_register_driver(&ipmi_pci_driver
);
3381 printk(KERN_ERR PFX
"Unable to register PCI driver: %d\n", rv
);
3387 pnp_register_driver(&ipmi_pnp_driver
);
3399 #ifdef CONFIG_PPC_OF
3400 of_register_platform_driver(&ipmi_of_platform_driver
);
3404 /* We prefer devices with interrupts, but in the case of a machine
3405 with multiple BMCs we assume that there will be several instances
3406 of a given type so if we succeed in registering a type then also
3407 try to register everything else of the same type */
3409 mutex_lock(&smi_infos_lock
);
3410 list_for_each_entry(e
, &smi_infos
, link
) {
3411 /* Try to register a device if it has an IRQ and we either
3412 haven't successfully registered a device yet or this
3413 device has the same type as one we successfully registered */
3414 if (e
->irq
&& (!type
|| e
->addr_source
== type
)) {
3415 if (!try_smi_init(e
)) {
3416 type
= e
->addr_source
;
3421 /* type will only have been set if we successfully registered an si */
3423 mutex_unlock(&smi_infos_lock
);
3427 /* Fall back to the preferred device */
3429 list_for_each_entry(e
, &smi_infos
, link
) {
3430 if (!e
->irq
&& (!type
|| e
->addr_source
== type
)) {
3431 if (!try_smi_init(e
)) {
3432 type
= e
->addr_source
;
3436 mutex_unlock(&smi_infos_lock
);
3441 if (si_trydefaults
) {
3442 mutex_lock(&smi_infos_lock
);
3443 if (list_empty(&smi_infos
)) {
3444 /* No BMC was found, try defaults. */
3445 mutex_unlock(&smi_infos_lock
);
3448 mutex_unlock(&smi_infos_lock
);
3451 mutex_lock(&smi_infos_lock
);
3452 if (unload_when_empty
&& list_empty(&smi_infos
)) {
3453 mutex_unlock(&smi_infos_lock
);
3455 printk(KERN_WARNING PFX
3456 "Unable to find any System Interface(s)\n");
3459 mutex_unlock(&smi_infos_lock
);
3463 module_init(init_ipmi_si
);
3465 static void cleanup_one_si(struct smi_info
*to_clean
)
3468 unsigned long flags
;
3473 list_del(&to_clean
->link
);
3475 /* Tell the driver that we are shutting down. */
3476 atomic_inc(&to_clean
->stop_operation
);
3479 * Make sure the timer and thread are stopped and will not run
3482 wait_for_timer_and_thread(to_clean
);
3485 * Timeouts are stopped, now make sure the interrupts are off
3486 * for the device. A little tricky with locks to make sure
3487 * there are no races.
3489 spin_lock_irqsave(&to_clean
->si_lock
, flags
);
3490 while (to_clean
->curr_msg
|| (to_clean
->si_state
!= SI_NORMAL
)) {
3491 spin_unlock_irqrestore(&to_clean
->si_lock
, flags
);
3493 schedule_timeout_uninterruptible(1);
3494 spin_lock_irqsave(&to_clean
->si_lock
, flags
);
3496 disable_si_irq(to_clean
);
3497 spin_unlock_irqrestore(&to_clean
->si_lock
, flags
);
3498 while (to_clean
->curr_msg
|| (to_clean
->si_state
!= SI_NORMAL
)) {
3500 schedule_timeout_uninterruptible(1);
3503 /* Clean up interrupts and make sure that everything is done. */
3504 if (to_clean
->irq_cleanup
)
3505 to_clean
->irq_cleanup(to_clean
);
3506 while (to_clean
->curr_msg
|| (to_clean
->si_state
!= SI_NORMAL
)) {
3508 schedule_timeout_uninterruptible(1);
3512 rv
= ipmi_unregister_smi(to_clean
->intf
);
3515 printk(KERN_ERR PFX
"Unable to unregister device: errno=%d\n",
3519 if (to_clean
->handlers
)
3520 to_clean
->handlers
->cleanup(to_clean
->si_sm
);
3522 kfree(to_clean
->si_sm
);
3524 if (to_clean
->addr_source_cleanup
)
3525 to_clean
->addr_source_cleanup(to_clean
);
3526 if (to_clean
->io_cleanup
)
3527 to_clean
->io_cleanup(to_clean
);
3529 if (to_clean
->dev_registered
)
3530 platform_device_unregister(to_clean
->pdev
);
3535 static void __exit
cleanup_ipmi_si(void)
3537 struct smi_info
*e
, *tmp_e
;
3544 pci_unregister_driver(&ipmi_pci_driver
);
3548 pnp_unregister_driver(&ipmi_pnp_driver
);
3551 #ifdef CONFIG_PPC_OF
3553 of_unregister_platform_driver(&ipmi_of_platform_driver
);
3556 mutex_lock(&smi_infos_lock
);
3557 list_for_each_entry_safe(e
, tmp_e
, &smi_infos
, link
)
3559 mutex_unlock(&smi_infos_lock
);
3561 driver_unregister(&ipmi_driver
.driver
);
3563 module_exit(cleanup_ipmi_si
);
3565 MODULE_LICENSE("GPL");
3566 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
3567 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
3568 " system interfaces.");