4 * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
7 * Author: MontaVista Software, Inc.
8 * Corey Minyard <minyard@mvista.com>
11 * Copyright 2002 MontaVista Software Inc.
12 * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License as published by the
16 * Free Software Foundation; either version 2 of the License, or (at your
17 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
25 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
26 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
27 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
28 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
29 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
37 * This file holds the "policy" for the interface to the SMI state
38 * machine. It does the configuration, handles timers and interrupts,
39 * and drives the real SMI state machine.
42 #include <linux/module.h>
43 #include <linux/moduleparam.h>
44 #include <linux/sched.h>
45 #include <linux/seq_file.h>
46 #include <linux/timer.h>
47 #include <linux/errno.h>
48 #include <linux/spinlock.h>
49 #include <linux/slab.h>
50 #include <linux/delay.h>
51 #include <linux/list.h>
52 #include <linux/pci.h>
53 #include <linux/ioport.h>
54 #include <linux/notifier.h>
55 #include <linux/mutex.h>
56 #include <linux/kthread.h>
58 #include <linux/interrupt.h>
59 #include <linux/rcupdate.h>
60 #include <linux/ipmi.h>
61 #include <linux/ipmi_smi.h>
63 #include "ipmi_si_sm.h"
64 #include <linux/dmi.h>
65 #include <linux/string.h>
66 #include <linux/ctype.h>
67 #include <linux/pnp.h>
68 #include <linux/of_device.h>
69 #include <linux/of_platform.h>
70 #include <linux/of_address.h>
71 #include <linux/of_irq.h>
74 #include <asm/hardware.h> /* for register_parisc_driver() stuff */
75 #include <asm/parisc-device.h>
78 #define PFX "ipmi_si: "
80 /* Measure times between events in the driver. */
83 /* Call every 10 ms. */
84 #define SI_TIMEOUT_TIME_USEC 10000
85 #define SI_USEC_PER_JIFFY (1000000/HZ)
86 #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
87 #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
98 /* FIXME - add watchdog stuff. */
101 /* Some BT-specific defines we need here. */
102 #define IPMI_BT_INTMASK_REG 2
103 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2
104 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1
107 SI_KCS
, SI_SMIC
, SI_BT
109 static char *si_to_str
[] = { "kcs", "smic", "bt" };
111 #define DEVICE_NAME "ipmi_si"
113 static struct platform_driver ipmi_driver
;
116 * Indexes into stats[] in smi_info below.
118 enum si_stat_indexes
{
120 * Number of times the driver requested a timer while an operation
123 SI_STAT_short_timeouts
= 0,
126 * Number of times the driver requested a timer while nothing was in
129 SI_STAT_long_timeouts
,
131 /* Number of times the interface was idle while being polled. */
134 /* Number of interrupts the driver handled. */
137 /* Number of time the driver got an ATTN from the hardware. */
140 /* Number of times the driver requested flags from the hardware. */
141 SI_STAT_flag_fetches
,
143 /* Number of times the hardware didn't follow the state machine. */
146 /* Number of completed messages. */
147 SI_STAT_complete_transactions
,
149 /* Number of IPMI events received from the hardware. */
152 /* Number of watchdog pretimeouts. */
153 SI_STAT_watchdog_pretimeouts
,
155 /* Number of asynchronous messages received. */
156 SI_STAT_incoming_messages
,
159 /* This *must* remain last, add new values above this. */
166 struct si_sm_data
*si_sm
;
167 struct si_sm_handlers
*handlers
;
168 enum si_type si_type
;
170 struct ipmi_smi_msg
*waiting_msg
;
171 struct ipmi_smi_msg
*curr_msg
;
172 enum si_intf_state si_state
;
175 * Used to handle the various types of I/O that can occur with
179 int (*io_setup
)(struct smi_info
*info
);
180 void (*io_cleanup
)(struct smi_info
*info
);
181 int (*irq_setup
)(struct smi_info
*info
);
182 void (*irq_cleanup
)(struct smi_info
*info
);
183 unsigned int io_size
;
184 enum ipmi_addr_src addr_source
; /* ACPI, PCI, SMBIOS, hardcode, etc. */
185 void (*addr_source_cleanup
)(struct smi_info
*info
);
186 void *addr_source_data
;
189 * Per-OEM handler, called from handle_flags(). Returns 1
190 * when handle_flags() needs to be re-run or 0 indicating it
191 * set si_state itself.
193 int (*oem_data_avail_handler
)(struct smi_info
*smi_info
);
196 * Flags from the last GET_MSG_FLAGS command, used when an ATTN
197 * is set to hold the flags until we are done handling everything
200 #define RECEIVE_MSG_AVAIL 0x01
201 #define EVENT_MSG_BUFFER_FULL 0x02
202 #define WDT_PRE_TIMEOUT_INT 0x08
203 #define OEM0_DATA_AVAIL 0x20
204 #define OEM1_DATA_AVAIL 0x40
205 #define OEM2_DATA_AVAIL 0x80
206 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
209 unsigned char msg_flags
;
211 /* Does the BMC have an event buffer? */
212 bool has_event_buffer
;
215 * If set to true, this will request events the next time the
216 * state machine is idle.
221 * If true, run the state machine to completion on every send
222 * call. Generally used after a panic to make sure stuff goes
225 bool run_to_completion
;
227 /* The I/O port of an SI interface. */
231 * The space between start addresses of the two ports. For
232 * instance, if the first port is 0xca2 and the spacing is 4, then
233 * the second port is 0xca6.
235 unsigned int spacing
;
237 /* zero if no irq; */
240 /* The timer for this si. */
241 struct timer_list si_timer
;
243 /* This flag is set, if the timer is running (timer_pending() isn't enough) */
246 /* The time (in jiffies) the last timeout occurred at. */
247 unsigned long last_timeout_jiffies
;
249 /* Are we waiting for the events, pretimeouts, received msgs? */
253 * The driver will disable interrupts when it gets into a
254 * situation where it cannot handle messages due to lack of
255 * memory. Once that situation clears up, it will re-enable
258 bool interrupt_disabled
;
261 * Does the BMC support events?
263 bool supports_event_msg_buff
;
266 * Did we get an attention that we did not handle?
270 /* From the get device id response... */
271 struct ipmi_device_id device_id
;
273 /* Driver model stuff. */
275 struct platform_device
*pdev
;
278 * True if we allocated the device, false if it came from
279 * someplace else (like PCI).
283 /* Slave address, could be reported from DMI. */
284 unsigned char slave_addr
;
286 /* Counters and things for the proc filesystem. */
287 atomic_t stats
[SI_NUM_STATS
];
289 struct task_struct
*thread
;
291 struct list_head link
;
292 union ipmi_smi_info_union addr_info
;
295 #define smi_inc_stat(smi, stat) \
296 atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
297 #define smi_get_stat(smi, stat) \
298 ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
300 #define SI_MAX_PARMS 4
302 static int force_kipmid
[SI_MAX_PARMS
];
303 static int num_force_kipmid
;
305 static bool pci_registered
;
308 static bool pnp_registered
;
311 static bool parisc_registered
;
314 static unsigned int kipmid_max_busy_us
[SI_MAX_PARMS
];
315 static int num_max_busy_us
;
317 static bool unload_when_empty
= true;
319 static int add_smi(struct smi_info
*smi
);
320 static int try_smi_init(struct smi_info
*smi
);
321 static void cleanup_one_si(struct smi_info
*to_clean
);
322 static void cleanup_ipmi_si(void);
325 void debug_timestamp(char *msg
)
329 getnstimeofday64(&t
);
330 pr_debug("**%s: %lld.%9.9ld\n", msg
, (long long) t
.tv_sec
, t
.tv_nsec
);
333 #define debug_timestamp(x)
336 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list
);
337 static int register_xaction_notifier(struct notifier_block
*nb
)
339 return atomic_notifier_chain_register(&xaction_notifier_list
, nb
);
342 static void deliver_recv_msg(struct smi_info
*smi_info
,
343 struct ipmi_smi_msg
*msg
)
345 /* Deliver the message to the upper layer. */
347 ipmi_smi_msg_received(smi_info
->intf
, msg
);
349 ipmi_free_smi_msg(msg
);
352 static void return_hosed_msg(struct smi_info
*smi_info
, int cCode
)
354 struct ipmi_smi_msg
*msg
= smi_info
->curr_msg
;
356 if (cCode
< 0 || cCode
> IPMI_ERR_UNSPECIFIED
)
357 cCode
= IPMI_ERR_UNSPECIFIED
;
358 /* else use it as is */
360 /* Make it a response */
361 msg
->rsp
[0] = msg
->data
[0] | 4;
362 msg
->rsp
[1] = msg
->data
[1];
366 smi_info
->curr_msg
= NULL
;
367 deliver_recv_msg(smi_info
, msg
);
370 static enum si_sm_result
start_next_msg(struct smi_info
*smi_info
)
374 if (!smi_info
->waiting_msg
) {
375 smi_info
->curr_msg
= NULL
;
380 smi_info
->curr_msg
= smi_info
->waiting_msg
;
381 smi_info
->waiting_msg
= NULL
;
382 debug_timestamp("Start2");
383 err
= atomic_notifier_call_chain(&xaction_notifier_list
,
385 if (err
& NOTIFY_STOP_MASK
) {
386 rv
= SI_SM_CALL_WITHOUT_DELAY
;
389 err
= smi_info
->handlers
->start_transaction(
391 smi_info
->curr_msg
->data
,
392 smi_info
->curr_msg
->data_size
);
394 return_hosed_msg(smi_info
, err
);
396 rv
= SI_SM_CALL_WITHOUT_DELAY
;
402 static void start_check_enables(struct smi_info
*smi_info
)
404 unsigned char msg
[2];
406 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
407 msg
[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD
;
409 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
410 smi_info
->si_state
= SI_CHECKING_ENABLES
;
413 static void start_clear_flags(struct smi_info
*smi_info
)
415 unsigned char msg
[3];
417 /* Make sure the watchdog pre-timeout flag is not set at startup. */
418 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
419 msg
[1] = IPMI_CLEAR_MSG_FLAGS_CMD
;
420 msg
[2] = WDT_PRE_TIMEOUT_INT
;
422 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 3);
423 smi_info
->si_state
= SI_CLEARING_FLAGS
;
426 static void start_getting_msg_queue(struct smi_info
*smi_info
)
428 smi_info
->curr_msg
->data
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
429 smi_info
->curr_msg
->data
[1] = IPMI_GET_MSG_CMD
;
430 smi_info
->curr_msg
->data_size
= 2;
432 smi_info
->handlers
->start_transaction(
434 smi_info
->curr_msg
->data
,
435 smi_info
->curr_msg
->data_size
);
436 smi_info
->si_state
= SI_GETTING_MESSAGES
;
439 static void start_getting_events(struct smi_info
*smi_info
)
441 smi_info
->curr_msg
->data
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
442 smi_info
->curr_msg
->data
[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD
;
443 smi_info
->curr_msg
->data_size
= 2;
445 smi_info
->handlers
->start_transaction(
447 smi_info
->curr_msg
->data
,
448 smi_info
->curr_msg
->data_size
);
449 smi_info
->si_state
= SI_GETTING_EVENTS
;
452 static void smi_mod_timer(struct smi_info
*smi_info
, unsigned long new_val
)
454 smi_info
->last_timeout_jiffies
= jiffies
;
455 mod_timer(&smi_info
->si_timer
, new_val
);
456 smi_info
->timer_running
= true;
460 * When we have a situtaion where we run out of memory and cannot
461 * allocate messages, we just leave them in the BMC and run the system
462 * polled until we can allocate some memory. Once we have some
463 * memory, we will re-enable the interrupt.
465 static inline bool disable_si_irq(struct smi_info
*smi_info
)
467 if ((smi_info
->irq
) && (!smi_info
->interrupt_disabled
)) {
468 smi_info
->interrupt_disabled
= true;
469 start_check_enables(smi_info
);
475 static inline bool enable_si_irq(struct smi_info
*smi_info
)
477 if ((smi_info
->irq
) && (smi_info
->interrupt_disabled
)) {
478 smi_info
->interrupt_disabled
= false;
479 start_check_enables(smi_info
);
486 * Allocate a message. If unable to allocate, start the interrupt
487 * disable process and return NULL. If able to allocate but
488 * interrupts are disabled, free the message and return NULL after
489 * starting the interrupt enable process.
491 static struct ipmi_smi_msg
*alloc_msg_handle_irq(struct smi_info
*smi_info
)
493 struct ipmi_smi_msg
*msg
;
495 msg
= ipmi_alloc_smi_msg();
497 if (!disable_si_irq(smi_info
))
498 smi_info
->si_state
= SI_NORMAL
;
499 } else if (enable_si_irq(smi_info
)) {
500 ipmi_free_smi_msg(msg
);
506 static void handle_flags(struct smi_info
*smi_info
)
509 if (smi_info
->msg_flags
& WDT_PRE_TIMEOUT_INT
) {
510 /* Watchdog pre-timeout */
511 smi_inc_stat(smi_info
, watchdog_pretimeouts
);
513 start_clear_flags(smi_info
);
514 smi_info
->msg_flags
&= ~WDT_PRE_TIMEOUT_INT
;
516 ipmi_smi_watchdog_pretimeout(smi_info
->intf
);
517 } else if (smi_info
->msg_flags
& RECEIVE_MSG_AVAIL
) {
518 /* Messages available. */
519 smi_info
->curr_msg
= alloc_msg_handle_irq(smi_info
);
520 if (!smi_info
->curr_msg
)
523 start_getting_msg_queue(smi_info
);
524 } else if (smi_info
->msg_flags
& EVENT_MSG_BUFFER_FULL
) {
525 /* Events available. */
526 smi_info
->curr_msg
= alloc_msg_handle_irq(smi_info
);
527 if (!smi_info
->curr_msg
)
530 start_getting_events(smi_info
);
531 } else if (smi_info
->msg_flags
& OEM_DATA_AVAIL
&&
532 smi_info
->oem_data_avail_handler
) {
533 if (smi_info
->oem_data_avail_handler(smi_info
))
536 smi_info
->si_state
= SI_NORMAL
;
540 * Global enables we care about.
542 #define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
543 IPMI_BMC_EVT_MSG_INTR)
545 static u8
current_global_enables(struct smi_info
*smi_info
, u8 base
,
550 if (smi_info
->supports_event_msg_buff
)
551 enables
|= IPMI_BMC_EVT_MSG_BUFF
;
553 enables
&= ~IPMI_BMC_EVT_MSG_BUFF
;
555 if (smi_info
->irq
&& !smi_info
->interrupt_disabled
)
556 enables
|= IPMI_BMC_RCV_MSG_INTR
;
558 enables
&= ~IPMI_BMC_RCV_MSG_INTR
;
560 if (smi_info
->supports_event_msg_buff
&&
561 smi_info
->irq
&& !smi_info
->interrupt_disabled
)
563 enables
|= IPMI_BMC_EVT_MSG_INTR
;
565 enables
&= ~IPMI_BMC_EVT_MSG_INTR
;
567 *irq_on
= enables
& (IPMI_BMC_EVT_MSG_INTR
| IPMI_BMC_RCV_MSG_INTR
);
572 static void check_bt_irq(struct smi_info
*smi_info
, bool irq_on
)
574 u8 irqstate
= smi_info
->io
.inputb(&smi_info
->io
, IPMI_BT_INTMASK_REG
);
576 irqstate
&= IPMI_BT_INTMASK_ENABLE_IRQ_BIT
;
578 if ((bool)irqstate
== irq_on
)
582 smi_info
->io
.outputb(&smi_info
->io
, IPMI_BT_INTMASK_REG
,
583 IPMI_BT_INTMASK_ENABLE_IRQ_BIT
);
585 smi_info
->io
.outputb(&smi_info
->io
, IPMI_BT_INTMASK_REG
, 0);
588 static void handle_transaction_done(struct smi_info
*smi_info
)
590 struct ipmi_smi_msg
*msg
;
592 debug_timestamp("Done");
593 switch (smi_info
->si_state
) {
595 if (!smi_info
->curr_msg
)
598 smi_info
->curr_msg
->rsp_size
599 = smi_info
->handlers
->get_result(
601 smi_info
->curr_msg
->rsp
,
602 IPMI_MAX_MSG_LENGTH
);
605 * Do this here becase deliver_recv_msg() releases the
606 * lock, and a new message can be put in during the
607 * time the lock is released.
609 msg
= smi_info
->curr_msg
;
610 smi_info
->curr_msg
= NULL
;
611 deliver_recv_msg(smi_info
, msg
);
614 case SI_GETTING_FLAGS
:
616 unsigned char msg
[4];
619 /* We got the flags from the SMI, now handle them. */
620 len
= smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
622 /* Error fetching flags, just give up for now. */
623 smi_info
->si_state
= SI_NORMAL
;
624 } else if (len
< 4) {
626 * Hmm, no flags. That's technically illegal, but
627 * don't use uninitialized data.
629 smi_info
->si_state
= SI_NORMAL
;
631 smi_info
->msg_flags
= msg
[3];
632 handle_flags(smi_info
);
637 case SI_CLEARING_FLAGS
:
639 unsigned char msg
[3];
641 /* We cleared the flags. */
642 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 3);
644 /* Error clearing flags */
645 dev_warn(smi_info
->dev
,
646 "Error clearing flags: %2.2x\n", msg
[2]);
648 smi_info
->si_state
= SI_NORMAL
;
652 case SI_GETTING_EVENTS
:
654 smi_info
->curr_msg
->rsp_size
655 = smi_info
->handlers
->get_result(
657 smi_info
->curr_msg
->rsp
,
658 IPMI_MAX_MSG_LENGTH
);
661 * Do this here becase deliver_recv_msg() releases the
662 * lock, and a new message can be put in during the
663 * time the lock is released.
665 msg
= smi_info
->curr_msg
;
666 smi_info
->curr_msg
= NULL
;
667 if (msg
->rsp
[2] != 0) {
668 /* Error getting event, probably done. */
671 /* Take off the event flag. */
672 smi_info
->msg_flags
&= ~EVENT_MSG_BUFFER_FULL
;
673 handle_flags(smi_info
);
675 smi_inc_stat(smi_info
, events
);
678 * Do this before we deliver the message
679 * because delivering the message releases the
680 * lock and something else can mess with the
683 handle_flags(smi_info
);
685 deliver_recv_msg(smi_info
, msg
);
690 case SI_GETTING_MESSAGES
:
692 smi_info
->curr_msg
->rsp_size
693 = smi_info
->handlers
->get_result(
695 smi_info
->curr_msg
->rsp
,
696 IPMI_MAX_MSG_LENGTH
);
699 * Do this here becase deliver_recv_msg() releases the
700 * lock, and a new message can be put in during the
701 * time the lock is released.
703 msg
= smi_info
->curr_msg
;
704 smi_info
->curr_msg
= NULL
;
705 if (msg
->rsp
[2] != 0) {
706 /* Error getting event, probably done. */
709 /* Take off the msg flag. */
710 smi_info
->msg_flags
&= ~RECEIVE_MSG_AVAIL
;
711 handle_flags(smi_info
);
713 smi_inc_stat(smi_info
, incoming_messages
);
716 * Do this before we deliver the message
717 * because delivering the message releases the
718 * lock and something else can mess with the
721 handle_flags(smi_info
);
723 deliver_recv_msg(smi_info
, msg
);
728 case SI_CHECKING_ENABLES
:
730 unsigned char msg
[4];
734 /* We got the flags from the SMI, now handle them. */
735 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
737 dev_warn(smi_info
->dev
,
738 "Couldn't get irq info: %x.\n", msg
[2]);
739 dev_warn(smi_info
->dev
,
740 "Maybe ok, but ipmi might run very slowly.\n");
741 smi_info
->si_state
= SI_NORMAL
;
744 enables
= current_global_enables(smi_info
, 0, &irq_on
);
745 if (smi_info
->si_type
== SI_BT
)
746 /* BT has its own interrupt enable bit. */
747 check_bt_irq(smi_info
, irq_on
);
748 if (enables
!= (msg
[3] & GLOBAL_ENABLES_MASK
)) {
749 /* Enables are not correct, fix them. */
750 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
751 msg
[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD
;
752 msg
[2] = enables
| (msg
[3] & ~GLOBAL_ENABLES_MASK
);
753 smi_info
->handlers
->start_transaction(
754 smi_info
->si_sm
, msg
, 3);
755 smi_info
->si_state
= SI_SETTING_ENABLES
;
756 } else if (smi_info
->supports_event_msg_buff
) {
757 smi_info
->curr_msg
= ipmi_alloc_smi_msg();
758 if (!smi_info
->curr_msg
) {
759 smi_info
->si_state
= SI_NORMAL
;
762 start_getting_msg_queue(smi_info
);
764 smi_info
->si_state
= SI_NORMAL
;
769 case SI_SETTING_ENABLES
:
771 unsigned char msg
[4];
773 smi_info
->handlers
->get_result(smi_info
->si_sm
, msg
, 4);
775 dev_warn(smi_info
->dev
,
776 "Could not set the global enables: 0x%x.\n",
779 if (smi_info
->supports_event_msg_buff
) {
780 smi_info
->curr_msg
= ipmi_alloc_smi_msg();
781 if (!smi_info
->curr_msg
) {
782 smi_info
->si_state
= SI_NORMAL
;
785 start_getting_msg_queue(smi_info
);
787 smi_info
->si_state
= SI_NORMAL
;
795 * Called on timeouts and events. Timeouts should pass the elapsed
796 * time, interrupts should pass in zero. Must be called with
797 * si_lock held and interrupts disabled.
799 static enum si_sm_result
smi_event_handler(struct smi_info
*smi_info
,
802 enum si_sm_result si_sm_result
;
806 * There used to be a loop here that waited a little while
807 * (around 25us) before giving up. That turned out to be
808 * pointless, the minimum delays I was seeing were in the 300us
809 * range, which is far too long to wait in an interrupt. So
810 * we just run until the state machine tells us something
811 * happened or it needs a delay.
813 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, time
);
815 while (si_sm_result
== SI_SM_CALL_WITHOUT_DELAY
)
816 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
818 if (si_sm_result
== SI_SM_TRANSACTION_COMPLETE
) {
819 smi_inc_stat(smi_info
, complete_transactions
);
821 handle_transaction_done(smi_info
);
822 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
823 } else if (si_sm_result
== SI_SM_HOSED
) {
824 smi_inc_stat(smi_info
, hosed_count
);
827 * Do the before return_hosed_msg, because that
830 smi_info
->si_state
= SI_NORMAL
;
831 if (smi_info
->curr_msg
!= NULL
) {
833 * If we were handling a user message, format
834 * a response to send to the upper layer to
835 * tell it about the error.
837 return_hosed_msg(smi_info
, IPMI_ERR_UNSPECIFIED
);
839 si_sm_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
843 * We prefer handling attn over new messages. But don't do
844 * this if there is not yet an upper layer to handle anything.
846 if (likely(smi_info
->intf
) &&
847 (si_sm_result
== SI_SM_ATTN
|| smi_info
->got_attn
)) {
848 unsigned char msg
[2];
850 if (smi_info
->si_state
!= SI_NORMAL
) {
852 * We got an ATTN, but we are doing something else.
853 * Handle the ATTN later.
855 smi_info
->got_attn
= true;
857 smi_info
->got_attn
= false;
858 smi_inc_stat(smi_info
, attentions
);
861 * Got a attn, send down a get message flags to see
862 * what's causing it. It would be better to handle
863 * this in the upper layer, but due to the way
864 * interrupts work with the SMI, that's not really
867 msg
[0] = (IPMI_NETFN_APP_REQUEST
<< 2);
868 msg
[1] = IPMI_GET_MSG_FLAGS_CMD
;
870 smi_info
->handlers
->start_transaction(
871 smi_info
->si_sm
, msg
, 2);
872 smi_info
->si_state
= SI_GETTING_FLAGS
;
877 /* If we are currently idle, try to start the next message. */
878 if (si_sm_result
== SI_SM_IDLE
) {
879 smi_inc_stat(smi_info
, idles
);
881 si_sm_result
= start_next_msg(smi_info
);
882 if (si_sm_result
!= SI_SM_IDLE
)
886 if ((si_sm_result
== SI_SM_IDLE
)
887 && (atomic_read(&smi_info
->req_events
))) {
889 * We are idle and the upper layer requested that I fetch
892 atomic_set(&smi_info
->req_events
, 0);
895 * Take this opportunity to check the interrupt and
896 * message enable state for the BMC. The BMC can be
897 * asynchronously reset, and may thus get interrupts
898 * disable and messages disabled.
900 if (smi_info
->supports_event_msg_buff
|| smi_info
->irq
) {
901 start_check_enables(smi_info
);
903 smi_info
->curr_msg
= alloc_msg_handle_irq(smi_info
);
904 if (!smi_info
->curr_msg
)
907 start_getting_events(smi_info
);
915 static void check_start_timer_thread(struct smi_info
*smi_info
)
917 if (smi_info
->si_state
== SI_NORMAL
&& smi_info
->curr_msg
== NULL
) {
918 smi_mod_timer(smi_info
, jiffies
+ SI_TIMEOUT_JIFFIES
);
920 if (smi_info
->thread
)
921 wake_up_process(smi_info
->thread
);
923 start_next_msg(smi_info
);
924 smi_event_handler(smi_info
, 0);
928 static void sender(void *send_info
,
929 struct ipmi_smi_msg
*msg
)
931 struct smi_info
*smi_info
= send_info
;
932 enum si_sm_result result
;
935 debug_timestamp("Enqueue");
937 if (smi_info
->run_to_completion
) {
939 * If we are running to completion, start it and run
940 * transactions until everything is clear.
942 smi_info
->curr_msg
= msg
;
943 smi_info
->waiting_msg
= NULL
;
946 * Run to completion means we are single-threaded, no
950 result
= smi_event_handler(smi_info
, 0);
951 while (result
!= SI_SM_IDLE
) {
952 udelay(SI_SHORT_TIMEOUT_USEC
);
953 result
= smi_event_handler(smi_info
,
954 SI_SHORT_TIMEOUT_USEC
);
959 spin_lock_irqsave(&smi_info
->si_lock
, flags
);
961 * The following two lines don't need to be under the lock for
962 * the lock's sake, but they do need SMP memory barriers to
963 * avoid getting things out of order. We are already claiming
964 * the lock, anyway, so just do it under the lock to avoid the
967 BUG_ON(smi_info
->waiting_msg
);
968 smi_info
->waiting_msg
= msg
;
969 check_start_timer_thread(smi_info
);
970 spin_unlock_irqrestore(&smi_info
->si_lock
, flags
);
973 static void set_run_to_completion(void *send_info
, bool i_run_to_completion
)
975 struct smi_info
*smi_info
= send_info
;
976 enum si_sm_result result
;
978 smi_info
->run_to_completion
= i_run_to_completion
;
979 if (i_run_to_completion
) {
980 result
= smi_event_handler(smi_info
, 0);
981 while (result
!= SI_SM_IDLE
) {
982 udelay(SI_SHORT_TIMEOUT_USEC
);
983 result
= smi_event_handler(smi_info
,
984 SI_SHORT_TIMEOUT_USEC
);
990 * Use -1 in the nsec value of the busy waiting timespec to tell that
991 * we are spinning in kipmid looking for something and not delaying
994 static inline void ipmi_si_set_not_busy(struct timespec64
*ts
)
998 static inline int ipmi_si_is_busy(struct timespec64
*ts
)
1000 return ts
->tv_nsec
!= -1;
1003 static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result
,
1004 const struct smi_info
*smi_info
,
1005 struct timespec64
*busy_until
)
1007 unsigned int max_busy_us
= 0;
1009 if (smi_info
->intf_num
< num_max_busy_us
)
1010 max_busy_us
= kipmid_max_busy_us
[smi_info
->intf_num
];
1011 if (max_busy_us
== 0 || smi_result
!= SI_SM_CALL_WITH_DELAY
)
1012 ipmi_si_set_not_busy(busy_until
);
1013 else if (!ipmi_si_is_busy(busy_until
)) {
1014 getnstimeofday64(busy_until
);
1015 timespec64_add_ns(busy_until
, max_busy_us
*NSEC_PER_USEC
);
1017 struct timespec64 now
;
1019 getnstimeofday64(&now
);
1020 if (unlikely(timespec64_compare(&now
, busy_until
) > 0)) {
1021 ipmi_si_set_not_busy(busy_until
);
1030 * A busy-waiting loop for speeding up IPMI operation.
1032 * Lousy hardware makes this hard. This is only enabled for systems
1033 * that are not BT and do not have interrupts. It starts spinning
1034 * when an operation is complete or until max_busy tells it to stop
1035 * (if that is enabled). See the paragraph on kimid_max_busy_us in
1036 * Documentation/IPMI.txt for details.
1038 static int ipmi_thread(void *data
)
1040 struct smi_info
*smi_info
= data
;
1041 unsigned long flags
;
1042 enum si_sm_result smi_result
;
1043 struct timespec64 busy_until
;
1045 ipmi_si_set_not_busy(&busy_until
);
1046 set_user_nice(current
, MAX_NICE
);
1047 while (!kthread_should_stop()) {
1050 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1051 smi_result
= smi_event_handler(smi_info
, 0);
1054 * If the driver is doing something, there is a possible
1055 * race with the timer. If the timer handler see idle,
1056 * and the thread here sees something else, the timer
1057 * handler won't restart the timer even though it is
1058 * required. So start it here if necessary.
1060 if (smi_result
!= SI_SM_IDLE
&& !smi_info
->timer_running
)
1061 smi_mod_timer(smi_info
, jiffies
+ SI_TIMEOUT_JIFFIES
);
1063 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1064 busy_wait
= ipmi_thread_busy_wait(smi_result
, smi_info
,
1066 if (smi_result
== SI_SM_CALL_WITHOUT_DELAY
)
1068 else if (smi_result
== SI_SM_CALL_WITH_DELAY
&& busy_wait
)
1070 else if (smi_result
== SI_SM_IDLE
) {
1071 if (atomic_read(&smi_info
->need_watch
)) {
1072 schedule_timeout_interruptible(100);
1074 /* Wait to be woken up when we are needed. */
1075 __set_current_state(TASK_INTERRUPTIBLE
);
1079 schedule_timeout_interruptible(1);
1085 static void poll(void *send_info
)
1087 struct smi_info
*smi_info
= send_info
;
1088 unsigned long flags
= 0;
1089 bool run_to_completion
= smi_info
->run_to_completion
;
1092 * Make sure there is some delay in the poll loop so we can
1093 * drive time forward and timeout things.
1096 if (!run_to_completion
)
1097 spin_lock_irqsave(&smi_info
->si_lock
, flags
);
1098 smi_event_handler(smi_info
, 10);
1099 if (!run_to_completion
)
1100 spin_unlock_irqrestore(&smi_info
->si_lock
, flags
);
1103 static void request_events(void *send_info
)
1105 struct smi_info
*smi_info
= send_info
;
1107 if (!smi_info
->has_event_buffer
)
1110 atomic_set(&smi_info
->req_events
, 1);
1113 static void set_need_watch(void *send_info
, bool enable
)
1115 struct smi_info
*smi_info
= send_info
;
1116 unsigned long flags
;
1118 atomic_set(&smi_info
->need_watch
, enable
);
1119 spin_lock_irqsave(&smi_info
->si_lock
, flags
);
1120 check_start_timer_thread(smi_info
);
1121 spin_unlock_irqrestore(&smi_info
->si_lock
, flags
);
1124 static int initialized
;
1126 static void smi_timeout(unsigned long data
)
1128 struct smi_info
*smi_info
= (struct smi_info
*) data
;
1129 enum si_sm_result smi_result
;
1130 unsigned long flags
;
1131 unsigned long jiffies_now
;
1135 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1136 debug_timestamp("Timer");
1138 jiffies_now
= jiffies
;
1139 time_diff
= (((long)jiffies_now
- (long)smi_info
->last_timeout_jiffies
)
1140 * SI_USEC_PER_JIFFY
);
1141 smi_result
= smi_event_handler(smi_info
, time_diff
);
1143 if ((smi_info
->irq
) && (!smi_info
->interrupt_disabled
)) {
1144 /* Running with interrupts, only do long timeouts. */
1145 timeout
= jiffies
+ SI_TIMEOUT_JIFFIES
;
1146 smi_inc_stat(smi_info
, long_timeouts
);
1151 * If the state machine asks for a short delay, then shorten
1152 * the timer timeout.
1154 if (smi_result
== SI_SM_CALL_WITH_DELAY
) {
1155 smi_inc_stat(smi_info
, short_timeouts
);
1156 timeout
= jiffies
+ 1;
1158 smi_inc_stat(smi_info
, long_timeouts
);
1159 timeout
= jiffies
+ SI_TIMEOUT_JIFFIES
;
1163 if (smi_result
!= SI_SM_IDLE
)
1164 smi_mod_timer(smi_info
, timeout
);
1166 smi_info
->timer_running
= false;
1167 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1170 static irqreturn_t
si_irq_handler(int irq
, void *data
)
1172 struct smi_info
*smi_info
= data
;
1173 unsigned long flags
;
1175 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
1177 smi_inc_stat(smi_info
, interrupts
);
1179 debug_timestamp("Interrupt");
1181 smi_event_handler(smi_info
, 0);
1182 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
1186 static irqreturn_t
si_bt_irq_handler(int irq
, void *data
)
1188 struct smi_info
*smi_info
= data
;
1189 /* We need to clear the IRQ flag for the BT interface. */
1190 smi_info
->io
.outputb(&smi_info
->io
, IPMI_BT_INTMASK_REG
,
1191 IPMI_BT_INTMASK_CLEAR_IRQ_BIT
1192 | IPMI_BT_INTMASK_ENABLE_IRQ_BIT
);
1193 return si_irq_handler(irq
, data
);
1196 static int smi_start_processing(void *send_info
,
1199 struct smi_info
*new_smi
= send_info
;
1202 new_smi
->intf
= intf
;
1204 /* Try to claim any interrupts. */
1205 if (new_smi
->irq_setup
)
1206 new_smi
->irq_setup(new_smi
);
1208 /* Set up the timer that drives the interface. */
1209 setup_timer(&new_smi
->si_timer
, smi_timeout
, (long)new_smi
);
1210 smi_mod_timer(new_smi
, jiffies
+ SI_TIMEOUT_JIFFIES
);
1213 * Check if the user forcefully enabled the daemon.
1215 if (new_smi
->intf_num
< num_force_kipmid
)
1216 enable
= force_kipmid
[new_smi
->intf_num
];
1218 * The BT interface is efficient enough to not need a thread,
1219 * and there is no need for a thread if we have interrupts.
1221 else if ((new_smi
->si_type
!= SI_BT
) && (!new_smi
->irq
))
1225 new_smi
->thread
= kthread_run(ipmi_thread
, new_smi
,
1226 "kipmi%d", new_smi
->intf_num
);
1227 if (IS_ERR(new_smi
->thread
)) {
1228 dev_notice(new_smi
->dev
, "Could not start"
1229 " kernel thread due to error %ld, only using"
1230 " timers to drive the interface\n",
1231 PTR_ERR(new_smi
->thread
));
1232 new_smi
->thread
= NULL
;
1239 static int get_smi_info(void *send_info
, struct ipmi_smi_info
*data
)
1241 struct smi_info
*smi
= send_info
;
1243 data
->addr_src
= smi
->addr_source
;
1244 data
->dev
= smi
->dev
;
1245 data
->addr_info
= smi
->addr_info
;
1246 get_device(smi
->dev
);
1251 static void set_maintenance_mode(void *send_info
, bool enable
)
1253 struct smi_info
*smi_info
= send_info
;
1256 atomic_set(&smi_info
->req_events
, 0);
1259 static struct ipmi_smi_handlers handlers
= {
1260 .owner
= THIS_MODULE
,
1261 .start_processing
= smi_start_processing
,
1262 .get_smi_info
= get_smi_info
,
1264 .request_events
= request_events
,
1265 .set_need_watch
= set_need_watch
,
1266 .set_maintenance_mode
= set_maintenance_mode
,
1267 .set_run_to_completion
= set_run_to_completion
,
1272 * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
1273 * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
1276 static LIST_HEAD(smi_infos
);
1277 static DEFINE_MUTEX(smi_infos_lock
);
1278 static int smi_num
; /* Used to sequence the SMIs */
1280 #define DEFAULT_REGSPACING 1
1281 #define DEFAULT_REGSIZE 1
1284 static bool si_tryacpi
= 1;
1287 static bool si_trydmi
= 1;
1289 static bool si_tryplatform
= 1;
1291 static bool si_trypci
= 1;
1293 static bool si_trydefaults
= IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS
);
1294 static char *si_type
[SI_MAX_PARMS
];
1295 #define MAX_SI_TYPE_STR 30
1296 static char si_type_str
[MAX_SI_TYPE_STR
];
1297 static unsigned long addrs
[SI_MAX_PARMS
];
1298 static unsigned int num_addrs
;
1299 static unsigned int ports
[SI_MAX_PARMS
];
1300 static unsigned int num_ports
;
1301 static int irqs
[SI_MAX_PARMS
];
1302 static unsigned int num_irqs
;
1303 static int regspacings
[SI_MAX_PARMS
];
1304 static unsigned int num_regspacings
;
1305 static int regsizes
[SI_MAX_PARMS
];
1306 static unsigned int num_regsizes
;
1307 static int regshifts
[SI_MAX_PARMS
];
1308 static unsigned int num_regshifts
;
1309 static int slave_addrs
[SI_MAX_PARMS
]; /* Leaving 0 chooses the default value */
1310 static unsigned int num_slave_addrs
;
1312 #define IPMI_IO_ADDR_SPACE 0
1313 #define IPMI_MEM_ADDR_SPACE 1
1314 static char *addr_space_to_str
[] = { "i/o", "mem" };
1316 static int hotmod_handler(const char *val
, struct kernel_param
*kp
);
1318 module_param_call(hotmod
, hotmod_handler
, NULL
, NULL
, 0200);
1319 MODULE_PARM_DESC(hotmod
, "Add and remove interfaces. See"
1320 " Documentation/IPMI.txt in the kernel sources for the"
1324 module_param_named(tryacpi
, si_tryacpi
, bool, 0);
1325 MODULE_PARM_DESC(tryacpi
, "Setting this to zero will disable the"
1326 " default scan of the interfaces identified via ACPI");
1329 module_param_named(trydmi
, si_trydmi
, bool, 0);
1330 MODULE_PARM_DESC(trydmi
, "Setting this to zero will disable the"
1331 " default scan of the interfaces identified via DMI");
1333 module_param_named(tryplatform
, si_tryplatform
, bool, 0);
1334 MODULE_PARM_DESC(tryacpi
, "Setting this to zero will disable the"
1335 " default scan of the interfaces identified via platform"
1336 " interfaces like openfirmware");
1338 module_param_named(trypci
, si_trypci
, bool, 0);
1339 MODULE_PARM_DESC(tryacpi
, "Setting this to zero will disable the"
1340 " default scan of the interfaces identified via pci");
1342 module_param_named(trydefaults
, si_trydefaults
, bool, 0);
1343 MODULE_PARM_DESC(trydefaults
, "Setting this to 'false' will disable the"
1344 " default scan of the KCS and SMIC interface at the standard"
1346 module_param_string(type
, si_type_str
, MAX_SI_TYPE_STR
, 0);
1347 MODULE_PARM_DESC(type
, "Defines the type of each interface, each"
1348 " interface separated by commas. The types are 'kcs',"
1349 " 'smic', and 'bt'. For example si_type=kcs,bt will set"
1350 " the first interface to kcs and the second to bt");
1351 module_param_array(addrs
, ulong
, &num_addrs
, 0);
1352 MODULE_PARM_DESC(addrs
, "Sets the memory address of each interface, the"
1353 " addresses separated by commas. Only use if an interface"
1354 " is in memory. Otherwise, set it to zero or leave"
1356 module_param_array(ports
, uint
, &num_ports
, 0);
1357 MODULE_PARM_DESC(ports
, "Sets the port address of each interface, the"
1358 " addresses separated by commas. Only use if an interface"
1359 " is a port. Otherwise, set it to zero or leave"
1361 module_param_array(irqs
, int, &num_irqs
, 0);
1362 MODULE_PARM_DESC(irqs
, "Sets the interrupt of each interface, the"
1363 " addresses separated by commas. Only use if an interface"
1364 " has an interrupt. Otherwise, set it to zero or leave"
1366 module_param_array(regspacings
, int, &num_regspacings
, 0);
1367 MODULE_PARM_DESC(regspacings
, "The number of bytes between the start address"
1368 " and each successive register used by the interface. For"
1369 " instance, if the start address is 0xca2 and the spacing"
1370 " is 2, then the second address is at 0xca4. Defaults"
1372 module_param_array(regsizes
, int, &num_regsizes
, 0);
1373 MODULE_PARM_DESC(regsizes
, "The size of the specific IPMI register in bytes."
1374 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1375 " 16-bit, 32-bit, or 64-bit register. Use this if you"
1376 " the 8-bit IPMI register has to be read from a larger"
1378 module_param_array(regshifts
, int, &num_regshifts
, 0);
1379 MODULE_PARM_DESC(regshifts
, "The amount to shift the data read from the."
1380 " IPMI register, in bits. For instance, if the data"
1381 " is read from a 32-bit word and the IPMI data is in"
1382 " bit 8-15, then the shift would be 8");
1383 module_param_array(slave_addrs
, int, &num_slave_addrs
, 0);
1384 MODULE_PARM_DESC(slave_addrs
, "Set the default IPMB slave address for"
1385 " the controller. Normally this is 0x20, but can be"
1386 " overridden by this parm. This is an array indexed"
1387 " by interface number.");
1388 module_param_array(force_kipmid
, int, &num_force_kipmid
, 0);
1389 MODULE_PARM_DESC(force_kipmid
, "Force the kipmi daemon to be enabled (1) or"
1390 " disabled(0). Normally the IPMI driver auto-detects"
1391 " this, but the value may be overridden by this parm.");
1392 module_param(unload_when_empty
, bool, 0);
1393 MODULE_PARM_DESC(unload_when_empty
, "Unload the module if no interfaces are"
1394 " specified or found, default is 1. Setting to 0"
1395 " is useful for hot add of devices using hotmod.");
1396 module_param_array(kipmid_max_busy_us
, uint
, &num_max_busy_us
, 0644);
1397 MODULE_PARM_DESC(kipmid_max_busy_us
,
1398 "Max time (in microseconds) to busy-wait for IPMI data before"
1399 " sleeping. 0 (default) means to wait forever. Set to 100-500"
1400 " if kipmid is using up a lot of CPU time.");
1403 static void std_irq_cleanup(struct smi_info
*info
)
1405 if (info
->si_type
== SI_BT
)
1406 /* Disable the interrupt in the BT interface. */
1407 info
->io
.outputb(&info
->io
, IPMI_BT_INTMASK_REG
, 0);
1408 free_irq(info
->irq
, info
);
1411 static int std_irq_setup(struct smi_info
*info
)
1418 if (info
->si_type
== SI_BT
) {
1419 rv
= request_irq(info
->irq
,
1425 /* Enable the interrupt in the BT interface. */
1426 info
->io
.outputb(&info
->io
, IPMI_BT_INTMASK_REG
,
1427 IPMI_BT_INTMASK_ENABLE_IRQ_BIT
);
1429 rv
= request_irq(info
->irq
,
1435 dev_warn(info
->dev
, "%s unable to claim interrupt %d,"
1436 " running polled\n",
1437 DEVICE_NAME
, info
->irq
);
1440 info
->irq_cleanup
= std_irq_cleanup
;
1441 dev_info(info
->dev
, "Using irq %d\n", info
->irq
);
1447 static unsigned char port_inb(struct si_sm_io
*io
, unsigned int offset
)
1449 unsigned int addr
= io
->addr_data
;
1451 return inb(addr
+ (offset
* io
->regspacing
));
1454 static void port_outb(struct si_sm_io
*io
, unsigned int offset
,
1457 unsigned int addr
= io
->addr_data
;
1459 outb(b
, addr
+ (offset
* io
->regspacing
));
1462 static unsigned char port_inw(struct si_sm_io
*io
, unsigned int offset
)
1464 unsigned int addr
= io
->addr_data
;
1466 return (inw(addr
+ (offset
* io
->regspacing
)) >> io
->regshift
) & 0xff;
1469 static void port_outw(struct si_sm_io
*io
, unsigned int offset
,
1472 unsigned int addr
= io
->addr_data
;
1474 outw(b
<< io
->regshift
, addr
+ (offset
* io
->regspacing
));
1477 static unsigned char port_inl(struct si_sm_io
*io
, unsigned int offset
)
1479 unsigned int addr
= io
->addr_data
;
1481 return (inl(addr
+ (offset
* io
->regspacing
)) >> io
->regshift
) & 0xff;
1484 static void port_outl(struct si_sm_io
*io
, unsigned int offset
,
1487 unsigned int addr
= io
->addr_data
;
1489 outl(b
<< io
->regshift
, addr
+(offset
* io
->regspacing
));
1492 static void port_cleanup(struct smi_info
*info
)
1494 unsigned int addr
= info
->io
.addr_data
;
1498 for (idx
= 0; idx
< info
->io_size
; idx
++)
1499 release_region(addr
+ idx
* info
->io
.regspacing
,
1504 static int port_setup(struct smi_info
*info
)
1506 unsigned int addr
= info
->io
.addr_data
;
1512 info
->io_cleanup
= port_cleanup
;
1515 * Figure out the actual inb/inw/inl/etc routine to use based
1516 * upon the register size.
1518 switch (info
->io
.regsize
) {
1520 info
->io
.inputb
= port_inb
;
1521 info
->io
.outputb
= port_outb
;
1524 info
->io
.inputb
= port_inw
;
1525 info
->io
.outputb
= port_outw
;
1528 info
->io
.inputb
= port_inl
;
1529 info
->io
.outputb
= port_outl
;
1532 dev_warn(info
->dev
, "Invalid register size: %d\n",
1538 * Some BIOSes reserve disjoint I/O regions in their ACPI
1539 * tables. This causes problems when trying to register the
1540 * entire I/O region. Therefore we must register each I/O
1543 for (idx
= 0; idx
< info
->io_size
; idx
++) {
1544 if (request_region(addr
+ idx
* info
->io
.regspacing
,
1545 info
->io
.regsize
, DEVICE_NAME
) == NULL
) {
1546 /* Undo allocations */
1548 release_region(addr
+ idx
* info
->io
.regspacing
,
1557 static unsigned char intf_mem_inb(struct si_sm_io
*io
, unsigned int offset
)
1559 return readb((io
->addr
)+(offset
* io
->regspacing
));
1562 static void intf_mem_outb(struct si_sm_io
*io
, unsigned int offset
,
1565 writeb(b
, (io
->addr
)+(offset
* io
->regspacing
));
1568 static unsigned char intf_mem_inw(struct si_sm_io
*io
, unsigned int offset
)
1570 return (readw((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1574 static void intf_mem_outw(struct si_sm_io
*io
, unsigned int offset
,
1577 writeb(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1580 static unsigned char intf_mem_inl(struct si_sm_io
*io
, unsigned int offset
)
1582 return (readl((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1586 static void intf_mem_outl(struct si_sm_io
*io
, unsigned int offset
,
1589 writel(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1593 static unsigned char mem_inq(struct si_sm_io
*io
, unsigned int offset
)
1595 return (readq((io
->addr
)+(offset
* io
->regspacing
)) >> io
->regshift
)
1599 static void mem_outq(struct si_sm_io
*io
, unsigned int offset
,
1602 writeq(b
<< io
->regshift
, (io
->addr
)+(offset
* io
->regspacing
));
1606 static void mem_cleanup(struct smi_info
*info
)
1608 unsigned long addr
= info
->io
.addr_data
;
1611 if (info
->io
.addr
) {
1612 iounmap(info
->io
.addr
);
1614 mapsize
= ((info
->io_size
* info
->io
.regspacing
)
1615 - (info
->io
.regspacing
- info
->io
.regsize
));
1617 release_mem_region(addr
, mapsize
);
1621 static int mem_setup(struct smi_info
*info
)
1623 unsigned long addr
= info
->io
.addr_data
;
1629 info
->io_cleanup
= mem_cleanup
;
1632 * Figure out the actual readb/readw/readl/etc routine to use based
1633 * upon the register size.
1635 switch (info
->io
.regsize
) {
1637 info
->io
.inputb
= intf_mem_inb
;
1638 info
->io
.outputb
= intf_mem_outb
;
1641 info
->io
.inputb
= intf_mem_inw
;
1642 info
->io
.outputb
= intf_mem_outw
;
1645 info
->io
.inputb
= intf_mem_inl
;
1646 info
->io
.outputb
= intf_mem_outl
;
1650 info
->io
.inputb
= mem_inq
;
1651 info
->io
.outputb
= mem_outq
;
1655 dev_warn(info
->dev
, "Invalid register size: %d\n",
1661 * Calculate the total amount of memory to claim. This is an
1662 * unusual looking calculation, but it avoids claiming any
1663 * more memory than it has to. It will claim everything
1664 * between the first address to the end of the last full
1667 mapsize
= ((info
->io_size
* info
->io
.regspacing
)
1668 - (info
->io
.regspacing
- info
->io
.regsize
));
1670 if (request_mem_region(addr
, mapsize
, DEVICE_NAME
) == NULL
)
1673 info
->io
.addr
= ioremap(addr
, mapsize
);
1674 if (info
->io
.addr
== NULL
) {
1675 release_mem_region(addr
, mapsize
);
1682 * Parms come in as <op1>[:op2[:op3...]]. ops are:
1683 * add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
1691 enum hotmod_op
{ HM_ADD
, HM_REMOVE
};
1692 struct hotmod_vals
{
1696 static struct hotmod_vals hotmod_ops
[] = {
1698 { "remove", HM_REMOVE
},
1701 static struct hotmod_vals hotmod_si
[] = {
1703 { "smic", SI_SMIC
},
1707 static struct hotmod_vals hotmod_as
[] = {
1708 { "mem", IPMI_MEM_ADDR_SPACE
},
1709 { "i/o", IPMI_IO_ADDR_SPACE
},
1713 static int parse_str(struct hotmod_vals
*v
, int *val
, char *name
, char **curr
)
1718 s
= strchr(*curr
, ',');
1720 printk(KERN_WARNING PFX
"No hotmod %s given.\n", name
);
1725 for (i
= 0; v
[i
].name
; i
++) {
1726 if (strcmp(*curr
, v
[i
].name
) == 0) {
1733 printk(KERN_WARNING PFX
"Invalid hotmod %s '%s'\n", name
, *curr
);
1737 static int check_hotmod_int_op(const char *curr
, const char *option
,
1738 const char *name
, int *val
)
1742 if (strcmp(curr
, name
) == 0) {
1744 printk(KERN_WARNING PFX
1745 "No option given for '%s'\n",
1749 *val
= simple_strtoul(option
, &n
, 0);
1750 if ((*n
!= '\0') || (*option
== '\0')) {
1751 printk(KERN_WARNING PFX
1752 "Bad option given for '%s'\n",
1761 static struct smi_info
*smi_info_alloc(void)
1763 struct smi_info
*info
= kzalloc(sizeof(*info
), GFP_KERNEL
);
1766 spin_lock_init(&info
->si_lock
);
1770 static int hotmod_handler(const char *val
, struct kernel_param
*kp
)
1772 char *str
= kstrdup(val
, GFP_KERNEL
);
1774 char *next
, *curr
, *s
, *n
, *o
;
1776 enum si_type si_type
;
1786 struct smi_info
*info
;
1791 /* Kill any trailing spaces, as we can get a "\n" from echo. */
1794 while ((ival
>= 0) && isspace(str
[ival
])) {
1799 for (curr
= str
; curr
; curr
= next
) {
1804 ipmb
= 0; /* Choose the default if not specified */
1806 next
= strchr(curr
, ':');
1812 rv
= parse_str(hotmod_ops
, &ival
, "operation", &curr
);
1817 rv
= parse_str(hotmod_si
, &ival
, "interface type", &curr
);
1822 rv
= parse_str(hotmod_as
, &addr_space
, "address space", &curr
);
1826 s
= strchr(curr
, ',');
1831 addr
= simple_strtoul(curr
, &n
, 0);
1832 if ((*n
!= '\0') || (*curr
== '\0')) {
1833 printk(KERN_WARNING PFX
"Invalid hotmod address"
1840 s
= strchr(curr
, ',');
1845 o
= strchr(curr
, '=');
1850 rv
= check_hotmod_int_op(curr
, o
, "rsp", ®spacing
);
1855 rv
= check_hotmod_int_op(curr
, o
, "rsi", ®size
);
1860 rv
= check_hotmod_int_op(curr
, o
, "rsh", ®shift
);
1865 rv
= check_hotmod_int_op(curr
, o
, "irq", &irq
);
1870 rv
= check_hotmod_int_op(curr
, o
, "ipmb", &ipmb
);
1877 printk(KERN_WARNING PFX
1878 "Invalid hotmod option '%s'\n",
1884 info
= smi_info_alloc();
1890 info
->addr_source
= SI_HOTMOD
;
1891 info
->si_type
= si_type
;
1892 info
->io
.addr_data
= addr
;
1893 info
->io
.addr_type
= addr_space
;
1894 if (addr_space
== IPMI_MEM_ADDR_SPACE
)
1895 info
->io_setup
= mem_setup
;
1897 info
->io_setup
= port_setup
;
1899 info
->io
.addr
= NULL
;
1900 info
->io
.regspacing
= regspacing
;
1901 if (!info
->io
.regspacing
)
1902 info
->io
.regspacing
= DEFAULT_REGSPACING
;
1903 info
->io
.regsize
= regsize
;
1904 if (!info
->io
.regsize
)
1905 info
->io
.regsize
= DEFAULT_REGSPACING
;
1906 info
->io
.regshift
= regshift
;
1909 info
->irq_setup
= std_irq_setup
;
1910 info
->slave_addr
= ipmb
;
1917 rv
= try_smi_init(info
);
1919 cleanup_one_si(info
);
1924 struct smi_info
*e
, *tmp_e
;
1926 mutex_lock(&smi_infos_lock
);
1927 list_for_each_entry_safe(e
, tmp_e
, &smi_infos
, link
) {
1928 if (e
->io
.addr_type
!= addr_space
)
1930 if (e
->si_type
!= si_type
)
1932 if (e
->io
.addr_data
== addr
)
1935 mutex_unlock(&smi_infos_lock
);
1944 static int hardcode_find_bmc(void)
1948 struct smi_info
*info
;
1950 for (i
= 0; i
< SI_MAX_PARMS
; i
++) {
1951 if (!ports
[i
] && !addrs
[i
])
1954 info
= smi_info_alloc();
1958 info
->addr_source
= SI_HARDCODED
;
1959 printk(KERN_INFO PFX
"probing via hardcoded address\n");
1961 if (!si_type
[i
] || strcmp(si_type
[i
], "kcs") == 0) {
1962 info
->si_type
= SI_KCS
;
1963 } else if (strcmp(si_type
[i
], "smic") == 0) {
1964 info
->si_type
= SI_SMIC
;
1965 } else if (strcmp(si_type
[i
], "bt") == 0) {
1966 info
->si_type
= SI_BT
;
1968 printk(KERN_WARNING PFX
"Interface type specified "
1969 "for interface %d, was invalid: %s\n",
1977 info
->io_setup
= port_setup
;
1978 info
->io
.addr_data
= ports
[i
];
1979 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
1980 } else if (addrs
[i
]) {
1982 info
->io_setup
= mem_setup
;
1983 info
->io
.addr_data
= addrs
[i
];
1984 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
1986 printk(KERN_WARNING PFX
"Interface type specified "
1987 "for interface %d, but port and address were "
1988 "not set or set to zero.\n", i
);
1993 info
->io
.addr
= NULL
;
1994 info
->io
.regspacing
= regspacings
[i
];
1995 if (!info
->io
.regspacing
)
1996 info
->io
.regspacing
= DEFAULT_REGSPACING
;
1997 info
->io
.regsize
= regsizes
[i
];
1998 if (!info
->io
.regsize
)
1999 info
->io
.regsize
= DEFAULT_REGSPACING
;
2000 info
->io
.regshift
= regshifts
[i
];
2001 info
->irq
= irqs
[i
];
2003 info
->irq_setup
= std_irq_setup
;
2004 info
->slave_addr
= slave_addrs
[i
];
2006 if (!add_smi(info
)) {
2007 if (try_smi_init(info
))
2008 cleanup_one_si(info
);
2019 #include <linux/acpi.h>
2022 * Once we get an ACPI failure, we don't try any more, because we go
2023 * through the tables sequentially. Once we don't find a table, there
2026 static int acpi_failure
;
2028 /* For GPE-type interrupts. */
2029 static u32
ipmi_acpi_gpe(acpi_handle gpe_device
,
2030 u32 gpe_number
, void *context
)
2032 struct smi_info
*smi_info
= context
;
2033 unsigned long flags
;
2035 spin_lock_irqsave(&(smi_info
->si_lock
), flags
);
2037 smi_inc_stat(smi_info
, interrupts
);
2039 debug_timestamp("ACPI_GPE");
2041 smi_event_handler(smi_info
, 0);
2042 spin_unlock_irqrestore(&(smi_info
->si_lock
), flags
);
2044 return ACPI_INTERRUPT_HANDLED
;
2047 static void acpi_gpe_irq_cleanup(struct smi_info
*info
)
2052 acpi_remove_gpe_handler(NULL
, info
->irq
, &ipmi_acpi_gpe
);
2055 static int acpi_gpe_irq_setup(struct smi_info
*info
)
2062 status
= acpi_install_gpe_handler(NULL
,
2064 ACPI_GPE_LEVEL_TRIGGERED
,
2067 if (status
!= AE_OK
) {
2068 dev_warn(info
->dev
, "%s unable to claim ACPI GPE %d,"
2069 " running polled\n", DEVICE_NAME
, info
->irq
);
2073 info
->irq_cleanup
= acpi_gpe_irq_cleanup
;
2074 dev_info(info
->dev
, "Using ACPI GPE %d\n", info
->irq
);
2081 * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
2092 s8 CreatorRevision
[4];
2095 s16 SpecificationRevision
;
2098 * Bit 0 - SCI interrupt supported
2099 * Bit 1 - I/O APIC/SAPIC
2104 * If bit 0 of InterruptType is set, then this is the SCI
2105 * interrupt in the GPEx_STS register.
2112 * If bit 1 of InterruptType is set, then this is the I/O
2113 * APIC/SAPIC interrupt.
2115 u32 GlobalSystemInterrupt
;
2117 /* The actual register address. */
2118 struct acpi_generic_address addr
;
2122 s8 spmi_id
[1]; /* A '\0' terminated array starts here. */
2125 static int try_init_spmi(struct SPMITable
*spmi
)
2127 struct smi_info
*info
;
2130 if (spmi
->IPMIlegacy
!= 1) {
2131 printk(KERN_INFO PFX
"Bad SPMI legacy %d\n", spmi
->IPMIlegacy
);
2135 info
= smi_info_alloc();
2137 printk(KERN_ERR PFX
"Could not allocate SI data (3)\n");
2141 info
->addr_source
= SI_SPMI
;
2142 printk(KERN_INFO PFX
"probing via SPMI\n");
2144 /* Figure out the interface type. */
2145 switch (spmi
->InterfaceType
) {
2147 info
->si_type
= SI_KCS
;
2150 info
->si_type
= SI_SMIC
;
2153 info
->si_type
= SI_BT
;
2155 case 4: /* SSIF, just ignore */
2159 printk(KERN_INFO PFX
"Unknown ACPI/SPMI SI type %d\n",
2160 spmi
->InterfaceType
);
2165 if (spmi
->InterruptType
& 1) {
2166 /* We've got a GPE interrupt. */
2167 info
->irq
= spmi
->GPE
;
2168 info
->irq_setup
= acpi_gpe_irq_setup
;
2169 } else if (spmi
->InterruptType
& 2) {
2170 /* We've got an APIC/SAPIC interrupt. */
2171 info
->irq
= spmi
->GlobalSystemInterrupt
;
2172 info
->irq_setup
= std_irq_setup
;
2174 /* Use the default interrupt setting. */
2176 info
->irq_setup
= NULL
;
2179 if (spmi
->addr
.bit_width
) {
2180 /* A (hopefully) properly formed register bit width. */
2181 info
->io
.regspacing
= spmi
->addr
.bit_width
/ 8;
2183 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2185 info
->io
.regsize
= info
->io
.regspacing
;
2186 info
->io
.regshift
= spmi
->addr
.bit_offset
;
2188 if (spmi
->addr
.space_id
== ACPI_ADR_SPACE_SYSTEM_MEMORY
) {
2189 info
->io_setup
= mem_setup
;
2190 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2191 } else if (spmi
->addr
.space_id
== ACPI_ADR_SPACE_SYSTEM_IO
) {
2192 info
->io_setup
= port_setup
;
2193 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2196 printk(KERN_WARNING PFX
"Unknown ACPI I/O Address type\n");
2199 info
->io
.addr_data
= spmi
->addr
.address
;
2201 pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
2202 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ? "io" : "mem",
2203 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2213 static void spmi_find_bmc(void)
2216 struct SPMITable
*spmi
;
2225 for (i
= 0; ; i
++) {
2226 status
= acpi_get_table(ACPI_SIG_SPMI
, i
+1,
2227 (struct acpi_table_header
**)&spmi
);
2228 if (status
!= AE_OK
)
2231 try_init_spmi(spmi
);
2235 static int ipmi_pnp_probe(struct pnp_dev
*dev
,
2236 const struct pnp_device_id
*dev_id
)
2238 struct acpi_device
*acpi_dev
;
2239 struct smi_info
*info
;
2240 struct resource
*res
, *res_second
;
2243 unsigned long long tmp
;
2246 acpi_dev
= pnp_acpi_device(dev
);
2250 info
= smi_info_alloc();
2254 info
->addr_source
= SI_ACPI
;
2255 printk(KERN_INFO PFX
"probing via ACPI\n");
2257 handle
= acpi_dev
->handle
;
2258 info
->addr_info
.acpi_info
.acpi_handle
= handle
;
2260 /* _IFT tells us the interface type: KCS, BT, etc */
2261 status
= acpi_evaluate_integer(handle
, "_IFT", NULL
, &tmp
);
2262 if (ACPI_FAILURE(status
))
2267 info
->si_type
= SI_KCS
;
2270 info
->si_type
= SI_SMIC
;
2273 info
->si_type
= SI_BT
;
2275 case 4: /* SSIF, just ignore */
2278 dev_info(&dev
->dev
, "unknown IPMI type %lld\n", tmp
);
2282 res
= pnp_get_resource(dev
, IORESOURCE_IO
, 0);
2284 info
->io_setup
= port_setup
;
2285 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2287 res
= pnp_get_resource(dev
, IORESOURCE_MEM
, 0);
2289 info
->io_setup
= mem_setup
;
2290 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2294 dev_err(&dev
->dev
, "no I/O or memory address\n");
2297 info
->io
.addr_data
= res
->start
;
2299 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2300 res_second
= pnp_get_resource(dev
,
2301 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ?
2302 IORESOURCE_IO
: IORESOURCE_MEM
,
2305 if (res_second
->start
> info
->io
.addr_data
)
2306 info
->io
.regspacing
= res_second
->start
- info
->io
.addr_data
;
2308 info
->io
.regsize
= DEFAULT_REGSPACING
;
2309 info
->io
.regshift
= 0;
2311 /* If _GPE exists, use it; otherwise use standard interrupts */
2312 status
= acpi_evaluate_integer(handle
, "_GPE", NULL
, &tmp
);
2313 if (ACPI_SUCCESS(status
)) {
2315 info
->irq_setup
= acpi_gpe_irq_setup
;
2316 } else if (pnp_irq_valid(dev
, 0)) {
2317 info
->irq
= pnp_irq(dev
, 0);
2318 info
->irq_setup
= std_irq_setup
;
2321 info
->dev
= &dev
->dev
;
2322 pnp_set_drvdata(dev
, info
);
2324 dev_info(info
->dev
, "%pR regsize %d spacing %d irq %d\n",
2325 res
, info
->io
.regsize
, info
->io
.regspacing
,
2339 static void ipmi_pnp_remove(struct pnp_dev
*dev
)
2341 struct smi_info
*info
= pnp_get_drvdata(dev
);
2343 cleanup_one_si(info
);
2346 static const struct pnp_device_id pnp_dev_table
[] = {
2351 static struct pnp_driver ipmi_pnp_driver
= {
2352 .name
= DEVICE_NAME
,
2353 .probe
= ipmi_pnp_probe
,
2354 .remove
= ipmi_pnp_remove
,
2355 .id_table
= pnp_dev_table
,
2358 MODULE_DEVICE_TABLE(pnp
, pnp_dev_table
);
2362 struct dmi_ipmi_data
{
2365 unsigned long base_addr
;
2371 static int decode_dmi(const struct dmi_header
*dm
,
2372 struct dmi_ipmi_data
*dmi
)
2374 const u8
*data
= (const u8
*)dm
;
2375 unsigned long base_addr
;
2377 u8 len
= dm
->length
;
2379 dmi
->type
= data
[4];
2381 memcpy(&base_addr
, data
+8, sizeof(unsigned long));
2383 if (base_addr
& 1) {
2385 base_addr
&= 0xFFFE;
2386 dmi
->addr_space
= IPMI_IO_ADDR_SPACE
;
2389 dmi
->addr_space
= IPMI_MEM_ADDR_SPACE
;
2391 /* If bit 4 of byte 0x10 is set, then the lsb for the address
2393 dmi
->base_addr
= base_addr
| ((data
[0x10] & 0x10) >> 4);
2395 dmi
->irq
= data
[0x11];
2397 /* The top two bits of byte 0x10 hold the register spacing. */
2398 reg_spacing
= (data
[0x10] & 0xC0) >> 6;
2399 switch (reg_spacing
) {
2400 case 0x00: /* Byte boundaries */
2403 case 0x01: /* 32-bit boundaries */
2406 case 0x02: /* 16-byte boundaries */
2410 /* Some other interface, just ignore it. */
2416 * Note that technically, the lower bit of the base
2417 * address should be 1 if the address is I/O and 0 if
2418 * the address is in memory. So many systems get that
2419 * wrong (and all that I have seen are I/O) so we just
2420 * ignore that bit and assume I/O. Systems that use
2421 * memory should use the newer spec, anyway.
2423 dmi
->base_addr
= base_addr
& 0xfffe;
2424 dmi
->addr_space
= IPMI_IO_ADDR_SPACE
;
2428 dmi
->slave_addr
= data
[6];
2433 static void try_init_dmi(struct dmi_ipmi_data
*ipmi_data
)
2435 struct smi_info
*info
;
2437 info
= smi_info_alloc();
2439 printk(KERN_ERR PFX
"Could not allocate SI data\n");
2443 info
->addr_source
= SI_SMBIOS
;
2444 printk(KERN_INFO PFX
"probing via SMBIOS\n");
2446 switch (ipmi_data
->type
) {
2447 case 0x01: /* KCS */
2448 info
->si_type
= SI_KCS
;
2450 case 0x02: /* SMIC */
2451 info
->si_type
= SI_SMIC
;
2454 info
->si_type
= SI_BT
;
2461 switch (ipmi_data
->addr_space
) {
2462 case IPMI_MEM_ADDR_SPACE
:
2463 info
->io_setup
= mem_setup
;
2464 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2467 case IPMI_IO_ADDR_SPACE
:
2468 info
->io_setup
= port_setup
;
2469 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2474 printk(KERN_WARNING PFX
"Unknown SMBIOS I/O Address type: %d\n",
2475 ipmi_data
->addr_space
);
2478 info
->io
.addr_data
= ipmi_data
->base_addr
;
2480 info
->io
.regspacing
= ipmi_data
->offset
;
2481 if (!info
->io
.regspacing
)
2482 info
->io
.regspacing
= DEFAULT_REGSPACING
;
2483 info
->io
.regsize
= DEFAULT_REGSPACING
;
2484 info
->io
.regshift
= 0;
2486 info
->slave_addr
= ipmi_data
->slave_addr
;
2488 info
->irq
= ipmi_data
->irq
;
2490 info
->irq_setup
= std_irq_setup
;
2492 pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
2493 (info
->io
.addr_type
== IPMI_IO_ADDR_SPACE
) ? "io" : "mem",
2494 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2501 static void dmi_find_bmc(void)
2503 const struct dmi_device
*dev
= NULL
;
2504 struct dmi_ipmi_data data
;
2507 while ((dev
= dmi_find_device(DMI_DEV_TYPE_IPMI
, NULL
, dev
))) {
2508 memset(&data
, 0, sizeof(data
));
2509 rv
= decode_dmi((const struct dmi_header
*) dev
->device_data
,
2512 try_init_dmi(&data
);
2515 #endif /* CONFIG_DMI */
2519 #define PCI_ERMC_CLASSCODE 0x0C0700
2520 #define PCI_ERMC_CLASSCODE_MASK 0xffffff00
2521 #define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
2522 #define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
2523 #define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
2524 #define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
2526 #define PCI_HP_VENDOR_ID 0x103C
2527 #define PCI_MMC_DEVICE_ID 0x121A
2528 #define PCI_MMC_ADDR_CW 0x10
2530 static void ipmi_pci_cleanup(struct smi_info
*info
)
2532 struct pci_dev
*pdev
= info
->addr_source_data
;
2534 pci_disable_device(pdev
);
2537 static int ipmi_pci_probe_regspacing(struct smi_info
*info
)
2539 if (info
->si_type
== SI_KCS
) {
2540 unsigned char status
;
2543 info
->io
.regsize
= DEFAULT_REGSIZE
;
2544 info
->io
.regshift
= 0;
2546 info
->handlers
= &kcs_smi_handlers
;
2548 /* detect 1, 4, 16byte spacing */
2549 for (regspacing
= DEFAULT_REGSPACING
; regspacing
<= 16;) {
2550 info
->io
.regspacing
= regspacing
;
2551 if (info
->io_setup(info
)) {
2553 "Could not setup I/O space\n");
2554 return DEFAULT_REGSPACING
;
2556 /* write invalid cmd */
2557 info
->io
.outputb(&info
->io
, 1, 0x10);
2558 /* read status back */
2559 status
= info
->io
.inputb(&info
->io
, 1);
2560 info
->io_cleanup(info
);
2566 return DEFAULT_REGSPACING
;
2569 static int ipmi_pci_probe(struct pci_dev
*pdev
,
2570 const struct pci_device_id
*ent
)
2573 int class_type
= pdev
->class & PCI_ERMC_CLASSCODE_TYPE_MASK
;
2574 struct smi_info
*info
;
2576 info
= smi_info_alloc();
2580 info
->addr_source
= SI_PCI
;
2581 dev_info(&pdev
->dev
, "probing via PCI");
2583 switch (class_type
) {
2584 case PCI_ERMC_CLASSCODE_TYPE_SMIC
:
2585 info
->si_type
= SI_SMIC
;
2588 case PCI_ERMC_CLASSCODE_TYPE_KCS
:
2589 info
->si_type
= SI_KCS
;
2592 case PCI_ERMC_CLASSCODE_TYPE_BT
:
2593 info
->si_type
= SI_BT
;
2598 dev_info(&pdev
->dev
, "Unknown IPMI type: %d\n", class_type
);
2602 rv
= pci_enable_device(pdev
);
2604 dev_err(&pdev
->dev
, "couldn't enable PCI device\n");
2609 info
->addr_source_cleanup
= ipmi_pci_cleanup
;
2610 info
->addr_source_data
= pdev
;
2612 if (pci_resource_flags(pdev
, 0) & IORESOURCE_IO
) {
2613 info
->io_setup
= port_setup
;
2614 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2616 info
->io_setup
= mem_setup
;
2617 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2619 info
->io
.addr_data
= pci_resource_start(pdev
, 0);
2621 info
->io
.regspacing
= ipmi_pci_probe_regspacing(info
);
2622 info
->io
.regsize
= DEFAULT_REGSIZE
;
2623 info
->io
.regshift
= 0;
2625 info
->irq
= pdev
->irq
;
2627 info
->irq_setup
= std_irq_setup
;
2629 info
->dev
= &pdev
->dev
;
2630 pci_set_drvdata(pdev
, info
);
2632 dev_info(&pdev
->dev
, "%pR regsize %d spacing %d irq %d\n",
2633 &pdev
->resource
[0], info
->io
.regsize
, info
->io
.regspacing
,
2639 pci_disable_device(pdev
);
2645 static void ipmi_pci_remove(struct pci_dev
*pdev
)
2647 struct smi_info
*info
= pci_get_drvdata(pdev
);
2648 cleanup_one_si(info
);
2649 pci_disable_device(pdev
);
2652 static struct pci_device_id ipmi_pci_devices
[] = {
2653 { PCI_DEVICE(PCI_HP_VENDOR_ID
, PCI_MMC_DEVICE_ID
) },
2654 { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE
, PCI_ERMC_CLASSCODE_MASK
) },
2657 MODULE_DEVICE_TABLE(pci
, ipmi_pci_devices
);
2659 static struct pci_driver ipmi_pci_driver
= {
2660 .name
= DEVICE_NAME
,
2661 .id_table
= ipmi_pci_devices
,
2662 .probe
= ipmi_pci_probe
,
2663 .remove
= ipmi_pci_remove
,
2665 #endif /* CONFIG_PCI */
2667 static const struct of_device_id ipmi_match
[];
2668 static int ipmi_probe(struct platform_device
*dev
)
2671 const struct of_device_id
*match
;
2672 struct smi_info
*info
;
2673 struct resource resource
;
2674 const __be32
*regsize
, *regspacing
, *regshift
;
2675 struct device_node
*np
= dev
->dev
.of_node
;
2679 dev_info(&dev
->dev
, "probing via device tree\n");
2681 match
= of_match_device(ipmi_match
, &dev
->dev
);
2685 if (!of_device_is_available(np
))
2688 ret
= of_address_to_resource(np
, 0, &resource
);
2690 dev_warn(&dev
->dev
, PFX
"invalid address from OF\n");
2694 regsize
= of_get_property(np
, "reg-size", &proplen
);
2695 if (regsize
&& proplen
!= 4) {
2696 dev_warn(&dev
->dev
, PFX
"invalid regsize from OF\n");
2700 regspacing
= of_get_property(np
, "reg-spacing", &proplen
);
2701 if (regspacing
&& proplen
!= 4) {
2702 dev_warn(&dev
->dev
, PFX
"invalid regspacing from OF\n");
2706 regshift
= of_get_property(np
, "reg-shift", &proplen
);
2707 if (regshift
&& proplen
!= 4) {
2708 dev_warn(&dev
->dev
, PFX
"invalid regshift from OF\n");
2712 info
= smi_info_alloc();
2716 "could not allocate memory for OF probe\n");
2720 info
->si_type
= (enum si_type
) match
->data
;
2721 info
->addr_source
= SI_DEVICETREE
;
2722 info
->irq_setup
= std_irq_setup
;
2724 if (resource
.flags
& IORESOURCE_IO
) {
2725 info
->io_setup
= port_setup
;
2726 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
2728 info
->io_setup
= mem_setup
;
2729 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2732 info
->io
.addr_data
= resource
.start
;
2734 info
->io
.regsize
= regsize
? be32_to_cpup(regsize
) : DEFAULT_REGSIZE
;
2735 info
->io
.regspacing
= regspacing
? be32_to_cpup(regspacing
) : DEFAULT_REGSPACING
;
2736 info
->io
.regshift
= regshift
? be32_to_cpup(regshift
) : 0;
2738 info
->irq
= irq_of_parse_and_map(dev
->dev
.of_node
, 0);
2739 info
->dev
= &dev
->dev
;
2741 dev_dbg(&dev
->dev
, "addr 0x%lx regsize %d spacing %d irq %d\n",
2742 info
->io
.addr_data
, info
->io
.regsize
, info
->io
.regspacing
,
2745 dev_set_drvdata(&dev
->dev
, info
);
2747 ret
= add_smi(info
);
2756 static int ipmi_remove(struct platform_device
*dev
)
2759 cleanup_one_si(dev_get_drvdata(&dev
->dev
));
2764 static const struct of_device_id ipmi_match
[] =
2766 { .type
= "ipmi", .compatible
= "ipmi-kcs",
2767 .data
= (void *)(unsigned long) SI_KCS
},
2768 { .type
= "ipmi", .compatible
= "ipmi-smic",
2769 .data
= (void *)(unsigned long) SI_SMIC
},
2770 { .type
= "ipmi", .compatible
= "ipmi-bt",
2771 .data
= (void *)(unsigned long) SI_BT
},
2775 static struct platform_driver ipmi_driver
= {
2777 .name
= DEVICE_NAME
,
2778 .of_match_table
= ipmi_match
,
2780 .probe
= ipmi_probe
,
2781 .remove
= ipmi_remove
,
2784 #ifdef CONFIG_PARISC
2785 static int ipmi_parisc_probe(struct parisc_device
*dev
)
2787 struct smi_info
*info
;
2790 info
= smi_info_alloc();
2794 "could not allocate memory for PARISC probe\n");
2798 info
->si_type
= SI_KCS
;
2799 info
->addr_source
= SI_DEVICETREE
;
2800 info
->io_setup
= mem_setup
;
2801 info
->io
.addr_type
= IPMI_MEM_ADDR_SPACE
;
2802 info
->io
.addr_data
= dev
->hpa
.start
;
2803 info
->io
.regsize
= 1;
2804 info
->io
.regspacing
= 1;
2805 info
->io
.regshift
= 0;
2806 info
->irq
= 0; /* no interrupt */
2807 info
->irq_setup
= NULL
;
2808 info
->dev
= &dev
->dev
;
2810 dev_dbg(&dev
->dev
, "addr 0x%lx\n", info
->io
.addr_data
);
2812 dev_set_drvdata(&dev
->dev
, info
);
2823 static int ipmi_parisc_remove(struct parisc_device
*dev
)
2825 cleanup_one_si(dev_get_drvdata(&dev
->dev
));
2829 static struct parisc_device_id ipmi_parisc_tbl
[] = {
2830 { HPHW_MC
, HVERSION_REV_ANY_ID
, 0x004, 0xC0 },
2834 static struct parisc_driver ipmi_parisc_driver
= {
2836 .id_table
= ipmi_parisc_tbl
,
2837 .probe
= ipmi_parisc_probe
,
2838 .remove
= ipmi_parisc_remove
,
2840 #endif /* CONFIG_PARISC */
2842 static int wait_for_msg_done(struct smi_info
*smi_info
)
2844 enum si_sm_result smi_result
;
2846 smi_result
= smi_info
->handlers
->event(smi_info
->si_sm
, 0);
2848 if (smi_result
== SI_SM_CALL_WITH_DELAY
||
2849 smi_result
== SI_SM_CALL_WITH_TICK_DELAY
) {
2850 schedule_timeout_uninterruptible(1);
2851 smi_result
= smi_info
->handlers
->event(
2852 smi_info
->si_sm
, jiffies_to_usecs(1));
2853 } else if (smi_result
== SI_SM_CALL_WITHOUT_DELAY
) {
2854 smi_result
= smi_info
->handlers
->event(
2855 smi_info
->si_sm
, 0);
2859 if (smi_result
== SI_SM_HOSED
)
2861 * We couldn't get the state machine to run, so whatever's at
2862 * the port is probably not an IPMI SMI interface.
2869 static int try_get_dev_id(struct smi_info
*smi_info
)
2871 unsigned char msg
[2];
2872 unsigned char *resp
;
2873 unsigned long resp_len
;
2876 resp
= kmalloc(IPMI_MAX_MSG_LENGTH
, GFP_KERNEL
);
2881 * Do a Get Device ID command, since it comes back with some
2884 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2885 msg
[1] = IPMI_GET_DEVICE_ID_CMD
;
2886 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
2888 rv
= wait_for_msg_done(smi_info
);
2892 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2893 resp
, IPMI_MAX_MSG_LENGTH
);
2895 /* Check and record info from the get device id, in case we need it. */
2896 rv
= ipmi_demangle_device_id(resp
, resp_len
, &smi_info
->device_id
);
2903 static int try_enable_event_buffer(struct smi_info
*smi_info
)
2905 unsigned char msg
[3];
2906 unsigned char *resp
;
2907 unsigned long resp_len
;
2910 resp
= kmalloc(IPMI_MAX_MSG_LENGTH
, GFP_KERNEL
);
2914 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2915 msg
[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD
;
2916 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 2);
2918 rv
= wait_for_msg_done(smi_info
);
2920 printk(KERN_WARNING PFX
"Error getting response from get"
2921 " global enables command, the event buffer is not"
2926 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2927 resp
, IPMI_MAX_MSG_LENGTH
);
2930 resp
[0] != (IPMI_NETFN_APP_REQUEST
| 1) << 2 ||
2931 resp
[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD
||
2933 printk(KERN_WARNING PFX
"Invalid return from get global"
2934 " enables command, cannot enable the event buffer.\n");
2939 if (resp
[3] & IPMI_BMC_EVT_MSG_BUFF
) {
2940 /* buffer is already enabled, nothing to do. */
2941 smi_info
->supports_event_msg_buff
= true;
2945 msg
[0] = IPMI_NETFN_APP_REQUEST
<< 2;
2946 msg
[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD
;
2947 msg
[2] = resp
[3] | IPMI_BMC_EVT_MSG_BUFF
;
2948 smi_info
->handlers
->start_transaction(smi_info
->si_sm
, msg
, 3);
2950 rv
= wait_for_msg_done(smi_info
);
2952 printk(KERN_WARNING PFX
"Error getting response from set"
2953 " global, enables command, the event buffer is not"
2958 resp_len
= smi_info
->handlers
->get_result(smi_info
->si_sm
,
2959 resp
, IPMI_MAX_MSG_LENGTH
);
2962 resp
[0] != (IPMI_NETFN_APP_REQUEST
| 1) << 2 ||
2963 resp
[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD
) {
2964 printk(KERN_WARNING PFX
"Invalid return from get global,"
2965 "enables command, not enable the event buffer.\n");
2972 * An error when setting the event buffer bit means
2973 * that the event buffer is not supported.
2977 smi_info
->supports_event_msg_buff
= true;
2984 static int smi_type_proc_show(struct seq_file
*m
, void *v
)
2986 struct smi_info
*smi
= m
->private;
2988 seq_printf(m
, "%s\n", si_to_str
[smi
->si_type
]);
2990 return seq_has_overflowed(m
);
2993 static int smi_type_proc_open(struct inode
*inode
, struct file
*file
)
2995 return single_open(file
, smi_type_proc_show
, PDE_DATA(inode
));
2998 static const struct file_operations smi_type_proc_ops
= {
2999 .open
= smi_type_proc_open
,
3001 .llseek
= seq_lseek
,
3002 .release
= single_release
,
3005 static int smi_si_stats_proc_show(struct seq_file
*m
, void *v
)
3007 struct smi_info
*smi
= m
->private;
3009 seq_printf(m
, "interrupts_enabled: %d\n",
3010 smi
->irq
&& !smi
->interrupt_disabled
);
3011 seq_printf(m
, "short_timeouts: %u\n",
3012 smi_get_stat(smi
, short_timeouts
));
3013 seq_printf(m
, "long_timeouts: %u\n",
3014 smi_get_stat(smi
, long_timeouts
));
3015 seq_printf(m
, "idles: %u\n",
3016 smi_get_stat(smi
, idles
));
3017 seq_printf(m
, "interrupts: %u\n",
3018 smi_get_stat(smi
, interrupts
));
3019 seq_printf(m
, "attentions: %u\n",
3020 smi_get_stat(smi
, attentions
));
3021 seq_printf(m
, "flag_fetches: %u\n",
3022 smi_get_stat(smi
, flag_fetches
));
3023 seq_printf(m
, "hosed_count: %u\n",
3024 smi_get_stat(smi
, hosed_count
));
3025 seq_printf(m
, "complete_transactions: %u\n",
3026 smi_get_stat(smi
, complete_transactions
));
3027 seq_printf(m
, "events: %u\n",
3028 smi_get_stat(smi
, events
));
3029 seq_printf(m
, "watchdog_pretimeouts: %u\n",
3030 smi_get_stat(smi
, watchdog_pretimeouts
));
3031 seq_printf(m
, "incoming_messages: %u\n",
3032 smi_get_stat(smi
, incoming_messages
));
3036 static int smi_si_stats_proc_open(struct inode
*inode
, struct file
*file
)
3038 return single_open(file
, smi_si_stats_proc_show
, PDE_DATA(inode
));
3041 static const struct file_operations smi_si_stats_proc_ops
= {
3042 .open
= smi_si_stats_proc_open
,
3044 .llseek
= seq_lseek
,
3045 .release
= single_release
,
3048 static int smi_params_proc_show(struct seq_file
*m
, void *v
)
3050 struct smi_info
*smi
= m
->private;
3053 "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
3054 si_to_str
[smi
->si_type
],
3055 addr_space_to_str
[smi
->io
.addr_type
],
3063 return seq_has_overflowed(m
);
3066 static int smi_params_proc_open(struct inode
*inode
, struct file
*file
)
3068 return single_open(file
, smi_params_proc_show
, PDE_DATA(inode
));
3071 static const struct file_operations smi_params_proc_ops
= {
3072 .open
= smi_params_proc_open
,
3074 .llseek
= seq_lseek
,
3075 .release
= single_release
,
3079 * oem_data_avail_to_receive_msg_avail
3080 * @info - smi_info structure with msg_flags set
3082 * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
3083 * Returns 1 indicating need to re-run handle_flags().
3085 static int oem_data_avail_to_receive_msg_avail(struct smi_info
*smi_info
)
3087 smi_info
->msg_flags
= ((smi_info
->msg_flags
& ~OEM_DATA_AVAIL
) |
3093 * setup_dell_poweredge_oem_data_handler
3094 * @info - smi_info.device_id must be populated
3096 * Systems that match, but have firmware version < 1.40 may assert
3097 * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
3098 * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL
3099 * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
3100 * as RECEIVE_MSG_AVAIL instead.
3102 * As Dell has no plans to release IPMI 1.5 firmware that *ever*
3103 * assert the OEM[012] bits, and if it did, the driver would have to
3104 * change to handle that properly, we don't actually check for the
3106 * Device ID = 0x20 BMC on PowerEdge 8G servers
3107 * Device Revision = 0x80
3108 * Firmware Revision1 = 0x01 BMC version 1.40
3109 * Firmware Revision2 = 0x40 BCD encoded
3110 * IPMI Version = 0x51 IPMI 1.5
3111 * Manufacturer ID = A2 02 00 Dell IANA
3113 * Additionally, PowerEdge systems with IPMI < 1.5 may also assert
3114 * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
3117 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20
3118 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
3119 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
3120 #define DELL_IANA_MFR_ID 0x0002a2
3121 static void setup_dell_poweredge_oem_data_handler(struct smi_info
*smi_info
)
3123 struct ipmi_device_id
*id
= &smi_info
->device_id
;
3124 if (id
->manufacturer_id
== DELL_IANA_MFR_ID
) {
3125 if (id
->device_id
== DELL_POWEREDGE_8G_BMC_DEVICE_ID
&&
3126 id
->device_revision
== DELL_POWEREDGE_8G_BMC_DEVICE_REV
&&
3127 id
->ipmi_version
== DELL_POWEREDGE_8G_BMC_IPMI_VERSION
) {
3128 smi_info
->oem_data_avail_handler
=
3129 oem_data_avail_to_receive_msg_avail
;
3130 } else if (ipmi_version_major(id
) < 1 ||
3131 (ipmi_version_major(id
) == 1 &&
3132 ipmi_version_minor(id
) < 5)) {
3133 smi_info
->oem_data_avail_handler
=
3134 oem_data_avail_to_receive_msg_avail
;
3139 #define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
3140 static void return_hosed_msg_badsize(struct smi_info
*smi_info
)
3142 struct ipmi_smi_msg
*msg
= smi_info
->curr_msg
;
3144 /* Make it a response */
3145 msg
->rsp
[0] = msg
->data
[0] | 4;
3146 msg
->rsp
[1] = msg
->data
[1];
3147 msg
->rsp
[2] = CANNOT_RETURN_REQUESTED_LENGTH
;
3149 smi_info
->curr_msg
= NULL
;
3150 deliver_recv_msg(smi_info
, msg
);
3154 * dell_poweredge_bt_xaction_handler
3155 * @info - smi_info.device_id must be populated
3157 * Dell PowerEdge servers with the BT interface (x6xx and 1750) will
3158 * not respond to a Get SDR command if the length of the data
3159 * requested is exactly 0x3A, which leads to command timeouts and no
3160 * data returned. This intercepts such commands, and causes userspace
3161 * callers to try again with a different-sized buffer, which succeeds.
3164 #define STORAGE_NETFN 0x0A
3165 #define STORAGE_CMD_GET_SDR 0x23
3166 static int dell_poweredge_bt_xaction_handler(struct notifier_block
*self
,
3167 unsigned long unused
,
3170 struct smi_info
*smi_info
= in
;
3171 unsigned char *data
= smi_info
->curr_msg
->data
;
3172 unsigned int size
= smi_info
->curr_msg
->data_size
;
3174 (data
[0]>>2) == STORAGE_NETFN
&&
3175 data
[1] == STORAGE_CMD_GET_SDR
&&
3177 return_hosed_msg_badsize(smi_info
);
3183 static struct notifier_block dell_poweredge_bt_xaction_notifier
= {
3184 .notifier_call
= dell_poweredge_bt_xaction_handler
,
3188 * setup_dell_poweredge_bt_xaction_handler
3189 * @info - smi_info.device_id must be filled in already
3191 * Fills in smi_info.device_id.start_transaction_pre_hook
3192 * when we know what function to use there.
3195 setup_dell_poweredge_bt_xaction_handler(struct smi_info
*smi_info
)
3197 struct ipmi_device_id
*id
= &smi_info
->device_id
;
3198 if (id
->manufacturer_id
== DELL_IANA_MFR_ID
&&
3199 smi_info
->si_type
== SI_BT
)
3200 register_xaction_notifier(&dell_poweredge_bt_xaction_notifier
);
3204 * setup_oem_data_handler
3205 * @info - smi_info.device_id must be filled in already
3207 * Fills in smi_info.device_id.oem_data_available_handler
3208 * when we know what function to use there.
3211 static void setup_oem_data_handler(struct smi_info
*smi_info
)
3213 setup_dell_poweredge_oem_data_handler(smi_info
);
3216 static void setup_xaction_handlers(struct smi_info
*smi_info
)
3218 setup_dell_poweredge_bt_xaction_handler(smi_info
);
3221 static inline void wait_for_timer_and_thread(struct smi_info
*smi_info
)
3223 if (smi_info
->thread
!= NULL
)
3224 kthread_stop(smi_info
->thread
);
3225 if (smi_info
->timer_running
)
3226 del_timer_sync(&smi_info
->si_timer
);
3229 static struct ipmi_default_vals
3235 { .type
= SI_KCS
, .port
= 0xca2 },
3236 { .type
= SI_SMIC
, .port
= 0xca9 },
3237 { .type
= SI_BT
, .port
= 0xe4 },
3241 static void default_find_bmc(void)
3243 struct smi_info
*info
;
3246 for (i
= 0; ; i
++) {
3247 if (!ipmi_defaults
[i
].port
)
3250 if (check_legacy_ioport(ipmi_defaults
[i
].port
))
3253 info
= smi_info_alloc();
3257 info
->addr_source
= SI_DEFAULT
;
3259 info
->si_type
= ipmi_defaults
[i
].type
;
3260 info
->io_setup
= port_setup
;
3261 info
->io
.addr_data
= ipmi_defaults
[i
].port
;
3262 info
->io
.addr_type
= IPMI_IO_ADDR_SPACE
;
3264 info
->io
.addr
= NULL
;
3265 info
->io
.regspacing
= DEFAULT_REGSPACING
;
3266 info
->io
.regsize
= DEFAULT_REGSPACING
;
3267 info
->io
.regshift
= 0;
3269 if (add_smi(info
) == 0) {
3270 if ((try_smi_init(info
)) == 0) {
3272 printk(KERN_INFO PFX
"Found default %s"
3273 " state machine at %s address 0x%lx\n",
3274 si_to_str
[info
->si_type
],
3275 addr_space_to_str
[info
->io
.addr_type
],
3276 info
->io
.addr_data
);
3278 cleanup_one_si(info
);
3285 static int is_new_interface(struct smi_info
*info
)
3289 list_for_each_entry(e
, &smi_infos
, link
) {
3290 if (e
->io
.addr_type
!= info
->io
.addr_type
)
3292 if (e
->io
.addr_data
== info
->io
.addr_data
)
3299 static int add_smi(struct smi_info
*new_smi
)
3303 printk(KERN_INFO PFX
"Adding %s-specified %s state machine",
3304 ipmi_addr_src_to_str(new_smi
->addr_source
),
3305 si_to_str
[new_smi
->si_type
]);
3306 mutex_lock(&smi_infos_lock
);
3307 if (!is_new_interface(new_smi
)) {
3308 printk(KERN_CONT
" duplicate interface\n");
3313 printk(KERN_CONT
"\n");
3315 /* So we know not to free it unless we have allocated one. */
3316 new_smi
->intf
= NULL
;
3317 new_smi
->si_sm
= NULL
;
3318 new_smi
->handlers
= NULL
;
3320 list_add_tail(&new_smi
->link
, &smi_infos
);
3323 mutex_unlock(&smi_infos_lock
);
3327 static int try_smi_init(struct smi_info
*new_smi
)
3332 printk(KERN_INFO PFX
"Trying %s-specified %s state"
3333 " machine at %s address 0x%lx, slave address 0x%x,"
3335 ipmi_addr_src_to_str(new_smi
->addr_source
),
3336 si_to_str
[new_smi
->si_type
],
3337 addr_space_to_str
[new_smi
->io
.addr_type
],
3338 new_smi
->io
.addr_data
,
3339 new_smi
->slave_addr
, new_smi
->irq
);
3341 switch (new_smi
->si_type
) {
3343 new_smi
->handlers
= &kcs_smi_handlers
;
3347 new_smi
->handlers
= &smic_smi_handlers
;
3351 new_smi
->handlers
= &bt_smi_handlers
;
3355 /* No support for anything else yet. */
3360 /* Allocate the state machine's data and initialize it. */
3361 new_smi
->si_sm
= kmalloc(new_smi
->handlers
->size(), GFP_KERNEL
);
3362 if (!new_smi
->si_sm
) {
3364 "Could not allocate state machine memory\n");
3368 new_smi
->io_size
= new_smi
->handlers
->init_data(new_smi
->si_sm
,
3371 /* Now that we know the I/O size, we can set up the I/O. */
3372 rv
= new_smi
->io_setup(new_smi
);
3374 printk(KERN_ERR PFX
"Could not set up I/O space\n");
3378 /* Do low-level detection first. */
3379 if (new_smi
->handlers
->detect(new_smi
->si_sm
)) {
3380 if (new_smi
->addr_source
)
3381 printk(KERN_INFO PFX
"Interface detection failed\n");
3387 * Attempt a get device id command. If it fails, we probably
3388 * don't have a BMC here.
3390 rv
= try_get_dev_id(new_smi
);
3392 if (new_smi
->addr_source
)
3393 printk(KERN_INFO PFX
"There appears to be no BMC"
3394 " at this location\n");
3398 setup_oem_data_handler(new_smi
);
3399 setup_xaction_handlers(new_smi
);
3401 new_smi
->waiting_msg
= NULL
;
3402 new_smi
->curr_msg
= NULL
;
3403 atomic_set(&new_smi
->req_events
, 0);
3404 new_smi
->run_to_completion
= false;
3405 for (i
= 0; i
< SI_NUM_STATS
; i
++)
3406 atomic_set(&new_smi
->stats
[i
], 0);
3408 new_smi
->interrupt_disabled
= true;
3409 atomic_set(&new_smi
->need_watch
, 0);
3410 new_smi
->intf_num
= smi_num
;
3413 rv
= try_enable_event_buffer(new_smi
);
3415 new_smi
->has_event_buffer
= true;
3418 * Start clearing the flags before we enable interrupts or the
3419 * timer to avoid racing with the timer.
3421 start_clear_flags(new_smi
);
3424 * IRQ is defined to be set when non-zero. req_events will
3425 * cause a global flags check that will enable interrupts.
3428 new_smi
->interrupt_disabled
= false;
3429 atomic_set(&new_smi
->req_events
, 1);
3432 if (!new_smi
->dev
) {
3434 * If we don't already have a device from something
3435 * else (like PCI), then register a new one.
3437 new_smi
->pdev
= platform_device_alloc("ipmi_si",
3439 if (!new_smi
->pdev
) {
3441 "Unable to allocate platform device\n");
3444 new_smi
->dev
= &new_smi
->pdev
->dev
;
3445 new_smi
->dev
->driver
= &ipmi_driver
.driver
;
3447 rv
= platform_device_add(new_smi
->pdev
);
3450 "Unable to register system interface device:"
3455 new_smi
->dev_registered
= true;
3458 rv
= ipmi_register_smi(&handlers
,
3460 &new_smi
->device_id
,
3462 new_smi
->slave_addr
);
3464 dev_err(new_smi
->dev
, "Unable to register device: error %d\n",
3466 goto out_err_stop_timer
;
3469 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "type",
3473 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3474 goto out_err_stop_timer
;
3477 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "si_stats",
3478 &smi_si_stats_proc_ops
,
3481 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3482 goto out_err_stop_timer
;
3485 rv
= ipmi_smi_add_proc_entry(new_smi
->intf
, "params",
3486 &smi_params_proc_ops
,
3489 dev_err(new_smi
->dev
, "Unable to create proc entry: %d\n", rv
);
3490 goto out_err_stop_timer
;
3493 dev_info(new_smi
->dev
, "IPMI %s interface initialized\n",
3494 si_to_str
[new_smi
->si_type
]);
3499 wait_for_timer_and_thread(new_smi
);
3502 new_smi
->interrupt_disabled
= true;
3504 if (new_smi
->intf
) {
3505 ipmi_smi_t intf
= new_smi
->intf
;
3506 new_smi
->intf
= NULL
;
3507 ipmi_unregister_smi(intf
);
3510 if (new_smi
->irq_cleanup
) {
3511 new_smi
->irq_cleanup(new_smi
);
3512 new_smi
->irq_cleanup
= NULL
;
3516 * Wait until we know that we are out of any interrupt
3517 * handlers might have been running before we freed the
3520 synchronize_sched();
3522 if (new_smi
->si_sm
) {
3523 if (new_smi
->handlers
)
3524 new_smi
->handlers
->cleanup(new_smi
->si_sm
);
3525 kfree(new_smi
->si_sm
);
3526 new_smi
->si_sm
= NULL
;
3528 if (new_smi
->addr_source_cleanup
) {
3529 new_smi
->addr_source_cleanup(new_smi
);
3530 new_smi
->addr_source_cleanup
= NULL
;
3532 if (new_smi
->io_cleanup
) {
3533 new_smi
->io_cleanup(new_smi
);
3534 new_smi
->io_cleanup
= NULL
;
3537 if (new_smi
->dev_registered
) {
3538 platform_device_unregister(new_smi
->pdev
);
3539 new_smi
->dev_registered
= false;
3545 static int init_ipmi_si(void)
3551 enum ipmi_addr_src type
= SI_INVALID
;
3557 if (si_tryplatform
) {
3558 rv
= platform_driver_register(&ipmi_driver
);
3560 printk(KERN_ERR PFX
"Unable to register "
3561 "driver: %d\n", rv
);
3566 /* Parse out the si_type string into its components. */
3569 for (i
= 0; (i
< SI_MAX_PARMS
) && (*str
!= '\0'); i
++) {
3571 str
= strchr(str
, ',');
3581 printk(KERN_INFO
"IPMI System Interface driver.\n");
3583 /* If the user gave us a device, they presumably want us to use it */
3584 if (!hardcode_find_bmc())
3589 rv
= pci_register_driver(&ipmi_pci_driver
);
3591 printk(KERN_ERR PFX
"Unable to register "
3592 "PCI driver: %d\n", rv
);
3594 pci_registered
= true;
3600 pnp_register_driver(&ipmi_pnp_driver
);
3601 pnp_registered
= true;
3615 #ifdef CONFIG_PARISC
3616 register_parisc_driver(&ipmi_parisc_driver
);
3617 parisc_registered
= true;
3618 /* poking PC IO addresses will crash machine, don't do it */
3622 /* We prefer devices with interrupts, but in the case of a machine
3623 with multiple BMCs we assume that there will be several instances
3624 of a given type so if we succeed in registering a type then also
3625 try to register everything else of the same type */
3627 mutex_lock(&smi_infos_lock
);
3628 list_for_each_entry(e
, &smi_infos
, link
) {
3629 /* Try to register a device if it has an IRQ and we either
3630 haven't successfully registered a device yet or this
3631 device has the same type as one we successfully registered */
3632 if (e
->irq
&& (!type
|| e
->addr_source
== type
)) {
3633 if (!try_smi_init(e
)) {
3634 type
= e
->addr_source
;
3639 /* type will only have been set if we successfully registered an si */
3641 mutex_unlock(&smi_infos_lock
);
3645 /* Fall back to the preferred device */
3647 list_for_each_entry(e
, &smi_infos
, link
) {
3648 if (!e
->irq
&& (!type
|| e
->addr_source
== type
)) {
3649 if (!try_smi_init(e
)) {
3650 type
= e
->addr_source
;
3654 mutex_unlock(&smi_infos_lock
);
3659 if (si_trydefaults
) {
3660 mutex_lock(&smi_infos_lock
);
3661 if (list_empty(&smi_infos
)) {
3662 /* No BMC was found, try defaults. */
3663 mutex_unlock(&smi_infos_lock
);
3666 mutex_unlock(&smi_infos_lock
);
3669 mutex_lock(&smi_infos_lock
);
3670 if (unload_when_empty
&& list_empty(&smi_infos
)) {
3671 mutex_unlock(&smi_infos_lock
);
3673 printk(KERN_WARNING PFX
3674 "Unable to find any System Interface(s)\n");
3677 mutex_unlock(&smi_infos_lock
);
3681 module_init(init_ipmi_si
);
3683 static void cleanup_one_si(struct smi_info
*to_clean
)
3690 if (to_clean
->intf
) {
3691 ipmi_smi_t intf
= to_clean
->intf
;
3693 to_clean
->intf
= NULL
;
3694 rv
= ipmi_unregister_smi(intf
);
3696 pr_err(PFX
"Unable to unregister device: errno=%d\n",
3702 dev_set_drvdata(to_clean
->dev
, NULL
);
3704 list_del(&to_clean
->link
);
3707 * Make sure that interrupts, the timer and the thread are
3708 * stopped and will not run again.
3710 if (to_clean
->irq_cleanup
)
3711 to_clean
->irq_cleanup(to_clean
);
3712 wait_for_timer_and_thread(to_clean
);
3715 * Timeouts are stopped, now make sure the interrupts are off
3716 * in the BMC. Note that timers and CPU interrupts are off,
3717 * so no need for locks.
3719 while (to_clean
->curr_msg
|| (to_clean
->si_state
!= SI_NORMAL
)) {
3721 schedule_timeout_uninterruptible(1);
3723 disable_si_irq(to_clean
);
3724 while (to_clean
->curr_msg
|| (to_clean
->si_state
!= SI_NORMAL
)) {
3726 schedule_timeout_uninterruptible(1);
3729 if (to_clean
->handlers
)
3730 to_clean
->handlers
->cleanup(to_clean
->si_sm
);
3732 kfree(to_clean
->si_sm
);
3734 if (to_clean
->addr_source_cleanup
)
3735 to_clean
->addr_source_cleanup(to_clean
);
3736 if (to_clean
->io_cleanup
)
3737 to_clean
->io_cleanup(to_clean
);
3739 if (to_clean
->dev_registered
)
3740 platform_device_unregister(to_clean
->pdev
);
3745 static void cleanup_ipmi_si(void)
3747 struct smi_info
*e
, *tmp_e
;
3754 pci_unregister_driver(&ipmi_pci_driver
);
3758 pnp_unregister_driver(&ipmi_pnp_driver
);
3760 #ifdef CONFIG_PARISC
3761 if (parisc_registered
)
3762 unregister_parisc_driver(&ipmi_parisc_driver
);
3765 platform_driver_unregister(&ipmi_driver
);
3767 mutex_lock(&smi_infos_lock
);
3768 list_for_each_entry_safe(e
, tmp_e
, &smi_infos
, link
)
3770 mutex_unlock(&smi_infos_lock
);
3772 module_exit(cleanup_ipmi_si
);
3774 MODULE_LICENSE("GPL");
3775 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
3776 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
3777 " system interfaces.");