1 /*****************************************************************************/
3 * moxa.c -- MOXA Intellio family multiport serial driver.
5 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw).
7 * This code is loosely based on the Linux serial driver, written by
8 * Linus Torvalds, Theodore T'so and others.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
17 * MOXA Intellio Series Driver
23 #include <linux/module.h>
24 #include <linux/types.h>
26 #include <linux/ioport.h>
27 #include <linux/errno.h>
28 #include <linux/firmware.h>
29 #include <linux/signal.h>
30 #include <linux/sched.h>
31 #include <linux/timer.h>
32 #include <linux/interrupt.h>
33 #include <linux/tty.h>
34 #include <linux/tty_flip.h>
35 #include <linux/major.h>
36 #include <linux/string.h>
37 #include <linux/fcntl.h>
38 #include <linux/ptrace.h>
39 #include <linux/serial.h>
40 #include <linux/tty_driver.h>
41 #include <linux/delay.h>
42 #include <linux/pci.h>
43 #include <linux/init.h>
44 #include <linux/bitops.h>
45 #include <linux/completion.h>
47 #include <asm/system.h>
49 #include <asm/uaccess.h>
53 #define MOXA_VERSION "5.1k"
55 #define MOXA_FW_HDRLEN 32
58 #define MOXACUMAJOR 173
60 #define MAX_BOARDS 4 /* Don't change this value */
61 #define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
62 #define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
65 * Define the Moxa PCI vendor and device IDs.
67 #define MOXA_BUS_TYPE_ISA 0
68 #define MOXA_BUS_TYPE_PCI 1
71 MOXA_BOARD_C218_PCI
= 1,
78 static char *moxa_brdname
[] =
80 "C218 Turbo PCI series",
81 "C218 Turbo ISA series",
82 "C320 Turbo PCI series",
83 "C320 Turbo ISA series",
88 static struct pci_device_id moxa_pcibrds
[] = {
89 { PCI_DEVICE(PCI_VENDOR_ID_MOXA
, PCI_DEVICE_ID_MOXA_C218
),
90 .driver_data
= MOXA_BOARD_C218_PCI
},
91 { PCI_DEVICE(PCI_VENDOR_ID_MOXA
, PCI_DEVICE_ID_MOXA_C320
),
92 .driver_data
= MOXA_BOARD_C320_PCI
},
93 { PCI_DEVICE(PCI_VENDOR_ID_MOXA
, PCI_DEVICE_ID_MOXA_CP204J
),
94 .driver_data
= MOXA_BOARD_CP204J
},
97 MODULE_DEVICE_TABLE(pci
, moxa_pcibrds
);
98 #endif /* CONFIG_PCI */
102 static struct moxa_board_conf
{
109 struct moxa_port
*ports
;
111 void __iomem
*basemem
;
112 void __iomem
*intNdx
;
113 void __iomem
*intPend
;
114 void __iomem
*intTable
;
115 } moxa_boards
[MAX_BOARDS
];
117 struct mxser_mstatus
{
131 struct moxa_board_conf
*board
;
137 unsigned long statusflags
;
138 struct tty_struct
*tty
;
140 wait_queue_head_t open_wait
;
141 struct completion close_wait
;
143 struct timer_list emptyTimer
;
146 void __iomem
*tableAddr
;
155 int rxcnt
[MAX_PORTS
];
156 int txcnt
[MAX_PORTS
];
160 #define TXSTOPPED 0x1
162 #define EMPTYWAIT 0x4
165 #define SERIAL_DO_RESTART
167 #define WAKEUP_CHARS 256
169 static int ttymajor
= MOXAMAJOR
;
170 static struct mon_str moxaLog
;
171 static unsigned int moxaFuncTout
= HZ
/ 2;
172 /* Variables for insmod */
174 static unsigned long baseaddr
[MAX_BOARDS
];
175 static unsigned int type
[MAX_BOARDS
];
176 static unsigned int numports
[MAX_BOARDS
];
179 MODULE_AUTHOR("William Chen");
180 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
181 MODULE_LICENSE("GPL");
183 module_param_array(type
, uint
, NULL
, 0);
184 MODULE_PARM_DESC(type
, "card type: C218=2, C320=4");
185 module_param_array(baseaddr
, ulong
, NULL
, 0);
186 MODULE_PARM_DESC(baseaddr
, "base address");
187 module_param_array(numports
, uint
, NULL
, 0);
188 MODULE_PARM_DESC(numports
, "numports (ignored for C218)");
190 module_param(ttymajor
, int, 0);
195 static int moxa_open(struct tty_struct
*, struct file
*);
196 static void moxa_close(struct tty_struct
*, struct file
*);
197 static int moxa_write(struct tty_struct
*, const unsigned char *, int);
198 static int moxa_write_room(struct tty_struct
*);
199 static void moxa_flush_buffer(struct tty_struct
*);
200 static int moxa_chars_in_buffer(struct tty_struct
*);
201 static void moxa_flush_chars(struct tty_struct
*);
202 static void moxa_put_char(struct tty_struct
*, unsigned char);
203 static void moxa_throttle(struct tty_struct
*);
204 static void moxa_unthrottle(struct tty_struct
*);
205 static void moxa_set_termios(struct tty_struct
*, struct ktermios
*);
206 static void moxa_stop(struct tty_struct
*);
207 static void moxa_start(struct tty_struct
*);
208 static void moxa_hangup(struct tty_struct
*);
209 static int moxa_tiocmget(struct tty_struct
*tty
, struct file
*file
);
210 static int moxa_tiocmset(struct tty_struct
*tty
, struct file
*file
,
211 unsigned int set
, unsigned int clear
);
212 static void moxa_poll(unsigned long);
213 static void moxa_set_tty_param(struct tty_struct
*, struct ktermios
*);
214 static int moxa_block_till_ready(struct tty_struct
*, struct file
*,
216 static void moxa_setup_empty_event(struct tty_struct
*);
217 static void moxa_check_xmit_empty(unsigned long);
218 static void moxa_shut_down(struct moxa_port
*);
219 static void moxa_receive_data(struct moxa_port
*);
221 * moxa board interface functions:
223 static int MoxaDriverPoll(void);
224 static void MoxaPortEnable(struct moxa_port
*);
225 static void MoxaPortDisable(struct moxa_port
*);
226 static int MoxaPortSetTermio(struct moxa_port
*, struct ktermios
*, speed_t
);
227 static int MoxaPortGetLineOut(struct moxa_port
*, int *, int *);
228 static void MoxaPortLineCtrl(struct moxa_port
*, int, int);
229 static void MoxaPortFlowCtrl(struct moxa_port
*, int, int, int, int, int);
230 static int MoxaPortLineStatus(struct moxa_port
*);
231 static int MoxaPortDCDChange(struct moxa_port
*);
232 static int MoxaPortDCDON(struct moxa_port
*);
233 static void MoxaPortFlushData(struct moxa_port
*, int);
234 static int MoxaPortWriteData(struct moxa_port
*, unsigned char *, int);
235 static int MoxaPortReadData(struct moxa_port
*, struct tty_struct
*tty
);
236 static int MoxaPortTxQueue(struct moxa_port
*);
237 static int MoxaPortRxQueue(struct moxa_port
*);
238 static int MoxaPortTxFree(struct moxa_port
*);
239 static void MoxaPortTxDisable(struct moxa_port
*);
240 static void MoxaPortTxEnable(struct moxa_port
*);
241 static int MoxaPortResetBrkCnt(struct moxa_port
*);
242 static int moxa_get_serial_info(struct moxa_port
*, struct serial_struct __user
*);
243 static int moxa_set_serial_info(struct moxa_port
*, struct serial_struct __user
*);
244 static void MoxaSetFifo(struct moxa_port
*port
, int enable
);
250 static void moxa_wait_finish(void __iomem
*ofsAddr
)
252 unsigned long end
= jiffies
+ moxaFuncTout
;
254 while (readw(ofsAddr
+ FuncCode
) != 0)
255 if (time_after(jiffies
, end
))
257 if (readw(ofsAddr
+ FuncCode
) != 0 && printk_ratelimit())
258 printk(KERN_WARNING
"moxa function expired\n");
261 static void moxafunc(void __iomem
*ofsAddr
, int cmd
, ushort arg
)
263 writew(arg
, ofsAddr
+ FuncArg
);
264 writew(cmd
, ofsAddr
+ FuncCode
);
265 moxa_wait_finish(ofsAddr
);
272 static int moxa_ioctl(struct tty_struct
*tty
, struct file
*file
,
273 unsigned int cmd
, unsigned long arg
)
275 struct moxa_port
*ch
= tty
->driver_data
;
276 void __user
*argp
= (void __user
*)arg
;
279 if (tty
->index
== MAX_PORTS
) {
280 if (cmd
!= MOXA_GETDATACOUNT
&& cmd
!= MOXA_GET_IOQUEUE
&&
281 cmd
!= MOXA_GETMSTATUS
)
287 case MOXA_GETDATACOUNT
:
288 moxaLog
.tick
= jiffies
;
289 return copy_to_user(argp
, &moxaLog
, sizeof(moxaLog
)) ?
291 case MOXA_FLUSH_QUEUE
:
292 MoxaPortFlushData(ch
, arg
);
294 case MOXA_GET_IOQUEUE
: {
295 struct moxaq_str __user
*argm
= argp
;
296 struct moxaq_str tmp
;
300 for (i
= 0; i
< MAX_BOARDS
; i
++) {
301 p
= moxa_boards
[i
].ports
;
302 for (j
= 0; j
< MAX_PORTS_PER_BOARD
; j
++, p
++, argm
++) {
303 memset(&tmp
, 0, sizeof(tmp
));
304 if (moxa_boards
[i
].ready
) {
305 tmp
.inq
= MoxaPortRxQueue(p
);
306 tmp
.outq
= MoxaPortTxQueue(p
);
308 if (copy_to_user(argm
, &tmp
, sizeof(tmp
)))
313 } case MOXA_GET_OQUEUE
:
314 status
= MoxaPortTxQueue(ch
);
315 return put_user(status
, (unsigned long __user
*)argp
);
316 case MOXA_GET_IQUEUE
:
317 status
= MoxaPortRxQueue(ch
);
318 return put_user(status
, (unsigned long __user
*)argp
);
319 case MOXA_GETMSTATUS
: {
320 struct mxser_mstatus __user
*argm
= argp
;
321 struct mxser_mstatus tmp
;
325 for (i
= 0; i
< MAX_BOARDS
; i
++) {
326 p
= moxa_boards
[i
].ports
;
327 for (j
= 0; j
< MAX_PORTS_PER_BOARD
; j
++, p
++, argm
++) {
328 memset(&tmp
, 0, sizeof(tmp
));
329 if (!moxa_boards
[i
].ready
)
332 status
= MoxaPortLineStatus(p
);
340 if (!p
->tty
|| !p
->tty
->termios
)
341 tmp
.cflag
= p
->cflag
;
343 tmp
.cflag
= p
->tty
->termios
->c_cflag
;
345 if (copy_to_user(argm
, &tmp
, sizeof(tmp
)))
352 return moxa_get_serial_info(ch
, argp
);
354 return moxa_set_serial_info(ch
, argp
);
359 static void moxa_break_ctl(struct tty_struct
*tty
, int state
)
361 struct moxa_port
*port
= tty
->driver_data
;
363 moxafunc(port
->tableAddr
, state
? FC_SendBreak
: FC_StopBreak
,
367 static const struct tty_operations moxa_ops
= {
371 .write_room
= moxa_write_room
,
372 .flush_buffer
= moxa_flush_buffer
,
373 .chars_in_buffer
= moxa_chars_in_buffer
,
374 .flush_chars
= moxa_flush_chars
,
375 .put_char
= moxa_put_char
,
377 .throttle
= moxa_throttle
,
378 .unthrottle
= moxa_unthrottle
,
379 .set_termios
= moxa_set_termios
,
382 .hangup
= moxa_hangup
,
383 .break_ctl
= moxa_break_ctl
,
384 .tiocmget
= moxa_tiocmget
,
385 .tiocmset
= moxa_tiocmset
,
388 static struct tty_driver
*moxaDriver
;
389 static DEFINE_TIMER(moxaTimer
, moxa_poll
, 0, 0);
390 static DEFINE_SPINLOCK(moxa_lock
);
396 static int moxa_check_fw_model(struct moxa_board_conf
*brd
, u8 model
)
398 switch (brd
->boardType
) {
399 case MOXA_BOARD_C218_ISA
:
400 case MOXA_BOARD_C218_PCI
:
404 case MOXA_BOARD_CP204J
:
418 static int moxa_check_fw(const void *ptr
)
420 const __le16
*lptr
= ptr
;
422 if (*lptr
!= cpu_to_le16(0x7980))
428 static int moxa_load_bios(struct moxa_board_conf
*brd
, const u8
*buf
,
431 void __iomem
*baseAddr
= brd
->basemem
;
434 writeb(HW_reset
, baseAddr
+ Control_reg
); /* reset */
436 memset_io(baseAddr
, 0, 4096);
437 memcpy_toio(baseAddr
, buf
, len
); /* download BIOS */
438 writeb(0, baseAddr
+ Control_reg
); /* restart */
442 switch (brd
->boardType
) {
443 case MOXA_BOARD_C218_ISA
:
444 case MOXA_BOARD_C218_PCI
:
445 tmp
= readw(baseAddr
+ C218_key
);
446 if (tmp
!= C218_KeyCode
)
449 case MOXA_BOARD_CP204J
:
450 tmp
= readw(baseAddr
+ C218_key
);
451 if (tmp
!= CP204J_KeyCode
)
455 tmp
= readw(baseAddr
+ C320_key
);
456 if (tmp
!= C320_KeyCode
)
458 tmp
= readw(baseAddr
+ C320_status
);
459 if (tmp
!= STS_init
) {
460 printk(KERN_ERR
"moxa: bios upload failed -- CPU/Basic "
461 "module not found\n");
469 printk(KERN_ERR
"moxa: bios upload failed -- board not found\n");
473 static int moxa_load_320b(struct moxa_board_conf
*brd
, const u8
*ptr
,
476 void __iomem
*baseAddr
= brd
->basemem
;
479 printk(KERN_ERR
"moxa: invalid 320 bios -- too short\n");
483 writew(len
- 7168 - 2, baseAddr
+ C320bapi_len
);
484 writeb(1, baseAddr
+ Control_reg
); /* Select Page 1 */
485 memcpy_toio(baseAddr
+ DynPage_addr
, ptr
, 7168);
486 writeb(2, baseAddr
+ Control_reg
); /* Select Page 2 */
487 memcpy_toio(baseAddr
+ DynPage_addr
, ptr
+ 7168, len
- 7168);
492 static int moxa_real_load_code(struct moxa_board_conf
*brd
, const void *ptr
,
495 void __iomem
*baseAddr
= brd
->basemem
;
496 const u16
*uptr
= ptr
;
497 size_t wlen
, len2
, j
;
498 unsigned long key
, loadbuf
, loadlen
, checksum
, checksum_ok
;
499 unsigned int i
, retry
, c320
;
502 c320
= brd
->boardType
== MOXA_BOARD_C320_PCI
||
503 brd
->boardType
== MOXA_BOARD_C320_ISA
;
504 keycode
= (brd
->boardType
== MOXA_BOARD_CP204J
) ? CP204J_KeyCode
:
507 switch (brd
->boardType
) {
508 case MOXA_BOARD_CP204J
:
509 case MOXA_BOARD_C218_ISA
:
510 case MOXA_BOARD_C218_PCI
:
512 loadbuf
= C218_LoadBuf
;
513 loadlen
= C218DLoad_len
;
514 checksum
= C218check_sum
;
515 checksum_ok
= C218chksum_ok
;
519 keycode
= C320_KeyCode
;
520 loadbuf
= C320_LoadBuf
;
521 loadlen
= C320DLoad_len
;
522 checksum
= C320check_sum
;
523 checksum_ok
= C320chksum_ok
;
529 for (i
= 0; i
< wlen
; i
++)
530 usum
+= le16_to_cpu(uptr
[i
]);
536 len2
= (wlen
> 2048) ? 2048 : wlen
;
538 memcpy_toio(baseAddr
+ loadbuf
, ptr
+ j
, len2
<< 1);
541 writew(len2
, baseAddr
+ loadlen
);
542 writew(0, baseAddr
+ key
);
543 for (i
= 0; i
< 100; i
++) {
544 if (readw(baseAddr
+ key
) == keycode
)
548 if (readw(baseAddr
+ key
) != keycode
)
551 writew(0, baseAddr
+ loadlen
);
552 writew(usum
, baseAddr
+ checksum
);
553 writew(0, baseAddr
+ key
);
554 for (i
= 0; i
< 100; i
++) {
555 if (readw(baseAddr
+ key
) == keycode
)
560 } while ((readb(baseAddr
+ checksum_ok
) != 1) && (retry
< 3));
561 if (readb(baseAddr
+ checksum_ok
) != 1)
564 writew(0, baseAddr
+ key
);
565 for (i
= 0; i
< 600; i
++) {
566 if (readw(baseAddr
+ Magic_no
) == Magic_code
)
570 if (readw(baseAddr
+ Magic_no
) != Magic_code
)
574 if (brd
->busType
== MOXA_BUS_TYPE_PCI
) { /* ASIC board */
575 writew(0x3800, baseAddr
+ TMS320_PORT1
);
576 writew(0x3900, baseAddr
+ TMS320_PORT2
);
577 writew(28499, baseAddr
+ TMS320_CLOCK
);
579 writew(0x3200, baseAddr
+ TMS320_PORT1
);
580 writew(0x3400, baseAddr
+ TMS320_PORT2
);
581 writew(19999, baseAddr
+ TMS320_CLOCK
);
584 writew(1, baseAddr
+ Disable_IRQ
);
585 writew(0, baseAddr
+ Magic_no
);
586 for (i
= 0; i
< 500; i
++) {
587 if (readw(baseAddr
+ Magic_no
) == Magic_code
)
591 if (readw(baseAddr
+ Magic_no
) != Magic_code
)
595 j
= readw(baseAddr
+ Module_cnt
);
598 brd
->numPorts
= j
* 8;
599 writew(j
, baseAddr
+ Module_no
);
600 writew(0, baseAddr
+ Magic_no
);
601 for (i
= 0; i
< 600; i
++) {
602 if (readw(baseAddr
+ Magic_no
) == Magic_code
)
606 if (readw(baseAddr
+ Magic_no
) != Magic_code
)
609 brd
->intNdx
= baseAddr
+ IRQindex
;
610 brd
->intPend
= baseAddr
+ IRQpending
;
611 brd
->intTable
= baseAddr
+ IRQtable
;
616 static int moxa_load_code(struct moxa_board_conf
*brd
, const void *ptr
,
619 void __iomem
*ofsAddr
, *baseAddr
= brd
->basemem
;
620 struct moxa_port
*port
;
624 printk(KERN_ERR
"moxa: bios length is not even\n");
628 retval
= moxa_real_load_code(brd
, ptr
, len
); /* may change numPorts */
632 switch (brd
->boardType
) {
633 case MOXA_BOARD_C218_ISA
:
634 case MOXA_BOARD_C218_PCI
:
635 case MOXA_BOARD_CP204J
:
637 for (i
= 0; i
< brd
->numPorts
; i
++, port
++) {
640 port
->tableAddr
= baseAddr
+ Extern_table
+
642 ofsAddr
= port
->tableAddr
;
643 writew(C218rx_mask
, ofsAddr
+ RX_mask
);
644 writew(C218tx_mask
, ofsAddr
+ TX_mask
);
645 writew(C218rx_spage
+ i
* C218buf_pageno
, ofsAddr
+ Page_rxb
);
646 writew(readw(ofsAddr
+ Page_rxb
) + C218rx_pageno
, ofsAddr
+ EndPage_rxb
);
648 writew(C218tx_spage
+ i
* C218buf_pageno
, ofsAddr
+ Page_txb
);
649 writew(readw(ofsAddr
+ Page_txb
) + C218tx_pageno
, ofsAddr
+ EndPage_txb
);
655 for (i
= 0; i
< brd
->numPorts
; i
++, port
++) {
658 port
->tableAddr
= baseAddr
+ Extern_table
+
660 ofsAddr
= port
->tableAddr
;
661 switch (brd
->numPorts
) {
663 writew(C320p8rx_mask
, ofsAddr
+ RX_mask
);
664 writew(C320p8tx_mask
, ofsAddr
+ TX_mask
);
665 writew(C320p8rx_spage
+ i
* C320p8buf_pgno
, ofsAddr
+ Page_rxb
);
666 writew(readw(ofsAddr
+ Page_rxb
) + C320p8rx_pgno
, ofsAddr
+ EndPage_rxb
);
667 writew(C320p8tx_spage
+ i
* C320p8buf_pgno
, ofsAddr
+ Page_txb
);
668 writew(readw(ofsAddr
+ Page_txb
) + C320p8tx_pgno
, ofsAddr
+ EndPage_txb
);
672 writew(C320p16rx_mask
, ofsAddr
+ RX_mask
);
673 writew(C320p16tx_mask
, ofsAddr
+ TX_mask
);
674 writew(C320p16rx_spage
+ i
* C320p16buf_pgno
, ofsAddr
+ Page_rxb
);
675 writew(readw(ofsAddr
+ Page_rxb
) + C320p16rx_pgno
, ofsAddr
+ EndPage_rxb
);
676 writew(C320p16tx_spage
+ i
* C320p16buf_pgno
, ofsAddr
+ Page_txb
);
677 writew(readw(ofsAddr
+ Page_txb
) + C320p16tx_pgno
, ofsAddr
+ EndPage_txb
);
681 writew(C320p24rx_mask
, ofsAddr
+ RX_mask
);
682 writew(C320p24tx_mask
, ofsAddr
+ TX_mask
);
683 writew(C320p24rx_spage
+ i
* C320p24buf_pgno
, ofsAddr
+ Page_rxb
);
684 writew(readw(ofsAddr
+ Page_rxb
) + C320p24rx_pgno
, ofsAddr
+ EndPage_rxb
);
685 writew(C320p24tx_spage
+ i
* C320p24buf_pgno
, ofsAddr
+ Page_txb
);
686 writew(readw(ofsAddr
+ Page_txb
), ofsAddr
+ EndPage_txb
);
689 writew(C320p32rx_mask
, ofsAddr
+ RX_mask
);
690 writew(C320p32tx_mask
, ofsAddr
+ TX_mask
);
691 writew(C320p32tx_ofs
, ofsAddr
+ Ofs_txb
);
692 writew(C320p32rx_spage
+ i
* C320p32buf_pgno
, ofsAddr
+ Page_rxb
);
693 writew(readb(ofsAddr
+ Page_rxb
), ofsAddr
+ EndPage_rxb
);
694 writew(C320p32tx_spage
+ i
* C320p32buf_pgno
, ofsAddr
+ Page_txb
);
695 writew(readw(ofsAddr
+ Page_txb
), ofsAddr
+ EndPage_txb
);
704 static int moxa_load_fw(struct moxa_board_conf
*brd
, const struct firmware
*fw
)
706 void *ptr
= fw
->data
;
710 unsigned int a
, lenp
, lencnt
;
713 __le32 magic
; /* 0x34303430 */
715 u8 type
; /* UNIX = 3 */
716 u8 model
; /* C218T=1, C320T=2, CP204=3 */
721 BUILD_BUG_ON(ARRAY_SIZE(hdr
->len
) != ARRAY_SIZE(lens
));
723 if (fw
->size
< MOXA_FW_HDRLEN
) {
724 strcpy(rsn
, "too short (even header won't fit)");
727 if (hdr
->magic
!= cpu_to_le32(0x30343034)) {
728 sprintf(rsn
, "bad magic: %.8x", le32_to_cpu(hdr
->magic
));
731 if (hdr
->type
!= 3) {
732 sprintf(rsn
, "not for linux, type is %u", hdr
->type
);
735 if (moxa_check_fw_model(brd
, hdr
->model
)) {
736 sprintf(rsn
, "not for this card, model is %u", hdr
->model
);
740 len
= MOXA_FW_HDRLEN
;
741 lencnt
= hdr
->model
== 2 ? 5 : 3;
742 for (a
= 0; a
< ARRAY_SIZE(lens
); a
++) {
743 lens
[a
] = le16_to_cpu(hdr
->len
[a
]);
744 if (lens
[a
] && len
+ lens
[a
] <= fw
->size
&&
745 moxa_check_fw(&fw
->data
[len
]))
746 printk(KERN_WARNING
"moxa firmware: unexpected input "
747 "at offset %u, but going on\n", (u32
)len
);
748 if (!lens
[a
] && a
< lencnt
) {
749 sprintf(rsn
, "too few entries in fw file");
755 if (len
!= fw
->size
) {
756 sprintf(rsn
, "bad length: %u (should be %u)", (u32
)fw
->size
,
761 ptr
+= MOXA_FW_HDRLEN
;
764 strcpy(rsn
, "read above");
766 ret
= moxa_load_bios(brd
, ptr
, lens
[lenp
]);
770 /* we skip the tty section (lens[1]), since we don't need it */
771 ptr
+= lens
[lenp
] + lens
[lenp
+ 1];
772 lenp
+= 2; /* comm */
774 if (hdr
->model
== 2) {
775 ret
= moxa_load_320b(brd
, ptr
, lens
[lenp
]);
778 /* skip another tty */
779 ptr
+= lens
[lenp
] + lens
[lenp
+ 1];
783 ret
= moxa_load_code(brd
, ptr
, lens
[lenp
]);
789 printk(KERN_ERR
"firmware failed to load, reason: %s\n", rsn
);
793 static int moxa_init_board(struct moxa_board_conf
*brd
, struct device
*dev
)
795 const struct firmware
*fw
;
801 brd
->ports
= kcalloc(MAX_PORTS_PER_BOARD
, sizeof(*brd
->ports
),
803 if (brd
->ports
== NULL
) {
804 printk(KERN_ERR
"cannot allocate memory for ports\n");
809 for (i
= 0, p
= brd
->ports
; i
< MAX_PORTS_PER_BOARD
; i
++, p
++) {
810 p
->type
= PORT_16550A
;
811 p
->close_delay
= 5 * HZ
/ 10;
812 p
->cflag
= B9600
| CS8
| CREAD
| CLOCAL
| HUPCL
;
813 init_waitqueue_head(&p
->open_wait
);
814 init_completion(&p
->close_wait
);
816 setup_timer(&p
->emptyTimer
, moxa_check_xmit_empty
,
820 switch (brd
->boardType
) {
821 case MOXA_BOARD_C218_ISA
:
822 case MOXA_BOARD_C218_PCI
:
823 file
= "c218tunx.cod";
825 case MOXA_BOARD_CP204J
:
826 file
= "cp204unx.cod";
829 file
= "c320tunx.cod";
833 ret
= request_firmware(&fw
, file
, dev
);
835 printk(KERN_ERR
"request_firmware failed\n");
839 ret
= moxa_load_fw(brd
, fw
);
841 release_firmware(fw
);
848 if (!timer_pending(&moxaTimer
))
849 mod_timer(&moxaTimer
, jiffies
+ HZ
/ 50);
858 static void moxa_board_deinit(struct moxa_board_conf
*brd
)
863 for (i
= 0; i
< MAX_PORTS_PER_BOARD
; i
++)
864 del_timer_sync(&brd
->ports
[i
].emptyTimer
);
866 iounmap(brd
->basemem
);
872 static int __devinit
moxa_pci_probe(struct pci_dev
*pdev
,
873 const struct pci_device_id
*ent
)
875 struct moxa_board_conf
*board
;
877 int board_type
= ent
->driver_data
;
880 retval
= pci_enable_device(pdev
);
882 dev_err(&pdev
->dev
, "can't enable pci device\n");
886 for (i
= 0; i
< MAX_BOARDS
; i
++)
887 if (moxa_boards
[i
].basemem
== NULL
)
891 if (i
>= MAX_BOARDS
) {
892 dev_warn(&pdev
->dev
, "more than %u MOXA Intellio family boards "
893 "found. Board is ignored.\n", MAX_BOARDS
);
897 board
= &moxa_boards
[i
];
899 retval
= pci_request_region(pdev
, 2, "moxa-base");
901 dev_err(&pdev
->dev
, "can't request pci region 2\n");
905 board
->basemem
= ioremap(pci_resource_start(pdev
, 2), 0x4000);
906 if (board
->basemem
== NULL
) {
907 dev_err(&pdev
->dev
, "can't remap io space 2\n");
911 board
->boardType
= board_type
;
912 switch (board_type
) {
913 case MOXA_BOARD_C218_ISA
:
914 case MOXA_BOARD_C218_PCI
:
918 case MOXA_BOARD_CP204J
:
925 board
->busType
= MOXA_BUS_TYPE_PCI
;
927 retval
= moxa_init_board(board
, &pdev
->dev
);
931 pci_set_drvdata(pdev
, board
);
935 iounmap(board
->basemem
);
936 board
->basemem
= NULL
;
938 pci_release_region(pdev
, 2);
943 static void __devexit
moxa_pci_remove(struct pci_dev
*pdev
)
945 struct moxa_board_conf
*brd
= pci_get_drvdata(pdev
);
947 moxa_board_deinit(brd
);
949 pci_release_region(pdev
, 2);
952 static struct pci_driver moxa_pci_driver
= {
954 .id_table
= moxa_pcibrds
,
955 .probe
= moxa_pci_probe
,
956 .remove
= __devexit_p(moxa_pci_remove
)
958 #endif /* CONFIG_PCI */
960 static int __init
moxa_init(void)
962 unsigned int isabrds
= 0;
965 printk(KERN_INFO
"MOXA Intellio family driver version %s\n",
967 moxaDriver
= alloc_tty_driver(MAX_PORTS
+ 1);
971 moxaDriver
->owner
= THIS_MODULE
;
972 moxaDriver
->name
= "ttyMX";
973 moxaDriver
->major
= ttymajor
;
974 moxaDriver
->minor_start
= 0;
975 moxaDriver
->type
= TTY_DRIVER_TYPE_SERIAL
;
976 moxaDriver
->subtype
= SERIAL_TYPE_NORMAL
;
977 moxaDriver
->init_termios
= tty_std_termios
;
978 moxaDriver
->init_termios
.c_cflag
= B9600
| CS8
| CREAD
| CLOCAL
| HUPCL
;
979 moxaDriver
->init_termios
.c_ispeed
= 9600;
980 moxaDriver
->init_termios
.c_ospeed
= 9600;
981 moxaDriver
->flags
= TTY_DRIVER_REAL_RAW
;
982 tty_set_operations(moxaDriver
, &moxa_ops
);
984 pr_debug("Moxa tty devices major number = %d\n", ttymajor
);
986 if (tty_register_driver(moxaDriver
)) {
987 printk(KERN_ERR
"Couldn't install MOXA Smartio family driver !\n");
988 put_tty_driver(moxaDriver
);
992 /* Find the boards defined from module args. */
995 struct moxa_board_conf
*brd
= moxa_boards
;
997 for (i
= 0; i
< MAX_BOARDS
; i
++) {
1000 if (type
[i
] == MOXA_BOARD_C218_ISA
||
1001 type
[i
] == MOXA_BOARD_C320_ISA
) {
1002 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1003 isabrds
+ 1, moxa_brdname
[type
[i
] - 1],
1005 brd
->boardType
= type
[i
];
1006 brd
->numPorts
= type
[i
] == MOXA_BOARD_C218_ISA
? 8 :
1008 brd
->busType
= MOXA_BUS_TYPE_ISA
;
1009 brd
->basemem
= ioremap(baseaddr
[i
], 0x4000);
1010 if (!brd
->basemem
) {
1011 printk(KERN_ERR
"moxa: can't remap %lx\n",
1015 if (moxa_init_board(brd
, NULL
)) {
1016 iounmap(brd
->basemem
);
1017 brd
->basemem
= NULL
;
1029 retval
= pci_register_driver(&moxa_pci_driver
);
1031 printk(KERN_ERR
"Can't register moxa pci driver!\n");
1040 static void __exit
moxa_exit(void)
1044 del_timer_sync(&moxaTimer
);
1046 if (tty_unregister_driver(moxaDriver
))
1047 printk(KERN_ERR
"Couldn't unregister MOXA Intellio family "
1049 put_tty_driver(moxaDriver
);
1052 pci_unregister_driver(&moxa_pci_driver
);
1055 for (i
= 0; i
< MAX_BOARDS
; i
++) /* ISA boards */
1056 if (moxa_boards
[i
].ready
)
1057 moxa_board_deinit(&moxa_boards
[i
]);
1060 module_init(moxa_init
);
1061 module_exit(moxa_exit
);
1063 static int moxa_open(struct tty_struct
*tty
, struct file
*filp
)
1065 struct moxa_board_conf
*brd
;
1066 struct moxa_port
*ch
;
1071 if (port
== MAX_PORTS
) {
1072 return capable(CAP_SYS_ADMIN
) ? 0 : -EPERM
;
1074 brd
= &moxa_boards
[port
/ MAX_PORTS_PER_BOARD
];
1078 ch
= &brd
->ports
[port
% MAX_PORTS_PER_BOARD
];
1080 tty
->driver_data
= ch
;
1082 if (!(ch
->asyncflags
& ASYNC_INITIALIZED
)) {
1083 ch
->statusflags
= 0;
1084 moxa_set_tty_param(tty
, tty
->termios
);
1085 MoxaPortLineCtrl(ch
, 1, 1);
1087 ch
->asyncflags
|= ASYNC_INITIALIZED
;
1089 retval
= moxa_block_till_ready(tty
, filp
, ch
);
1091 moxa_unthrottle(tty
);
1093 if (ch
->type
== PORT_16550A
) {
1102 static void moxa_close(struct tty_struct
*tty
, struct file
*filp
)
1104 struct moxa_port
*ch
;
1108 if (port
== MAX_PORTS
) {
1111 if (tty
->driver_data
== NULL
) {
1114 if (tty_hung_up_p(filp
)) {
1117 ch
= (struct moxa_port
*) tty
->driver_data
;
1119 if ((tty
->count
== 1) && (ch
->count
!= 1)) {
1120 printk(KERN_WARNING
"moxa_close: bad serial port count; "
1121 "tty->count is 1, ch->count is %d\n", ch
->count
);
1124 if (--ch
->count
< 0) {
1125 printk(KERN_WARNING
"moxa_close: bad serial port count, "
1126 "device=%s\n", tty
->name
);
1132 ch
->asyncflags
|= ASYNC_CLOSING
;
1134 ch
->cflag
= tty
->termios
->c_cflag
;
1135 if (ch
->asyncflags
& ASYNC_INITIALIZED
) {
1136 moxa_setup_empty_event(tty
);
1137 tty_wait_until_sent(tty
, 30 * HZ
); /* 30 seconds timeout */
1138 del_timer_sync(&ch
->emptyTimer
);
1141 MoxaPortFlushData(ch
, 2);
1143 if (tty
->driver
->flush_buffer
)
1144 tty
->driver
->flush_buffer(tty
);
1145 tty_ldisc_flush(tty
);
1149 if (ch
->blocked_open
) {
1150 if (ch
->close_delay
) {
1151 msleep_interruptible(jiffies_to_msecs(ch
->close_delay
));
1153 wake_up_interruptible(&ch
->open_wait
);
1155 ch
->asyncflags
&= ~(ASYNC_NORMAL_ACTIVE
| ASYNC_CLOSING
);
1156 complete_all(&ch
->close_wait
);
1159 static int moxa_write(struct tty_struct
*tty
,
1160 const unsigned char *buf
, int count
)
1162 struct moxa_port
*ch
= tty
->driver_data
;
1163 unsigned long flags
;
1169 spin_lock_irqsave(&moxa_lock
, flags
);
1170 len
= MoxaPortWriteData(ch
, (unsigned char *) buf
, count
);
1171 spin_unlock_irqrestore(&moxa_lock
, flags
);
1173 /*********************************************
1174 if ( !(ch->statusflags & LOWWAIT) &&
1175 ((len != count) || (MoxaPortTxFree(port) <= 100)) )
1176 ************************************************/
1177 ch
->statusflags
|= LOWWAIT
;
1181 static int moxa_write_room(struct tty_struct
*tty
)
1183 struct moxa_port
*ch
;
1187 ch
= tty
->driver_data
;
1190 return MoxaPortTxFree(ch
);
1193 static void moxa_flush_buffer(struct tty_struct
*tty
)
1195 struct moxa_port
*ch
= tty
->driver_data
;
1199 MoxaPortFlushData(ch
, 1);
1203 static int moxa_chars_in_buffer(struct tty_struct
*tty
)
1205 struct moxa_port
*ch
= tty
->driver_data
;
1209 * Sigh...I have to check if driver_data is NULL here, because
1210 * if an open() fails, the TTY subsystem eventually calls
1211 * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
1212 * routine. And since the open() failed, we return 0 here. TDJ
1216 chars
= MoxaPortTxQueue(ch
);
1219 * Make it possible to wakeup anything waiting for output
1220 * in tty_ioctl.c, etc.
1222 if (!(ch
->statusflags
& EMPTYWAIT
))
1223 moxa_setup_empty_event(tty
);
1228 static void moxa_flush_chars(struct tty_struct
*tty
)
1231 * Don't think I need this, because this is called to empty the TX
1232 * buffer for the 16450, 16550, etc.
1236 static void moxa_put_char(struct tty_struct
*tty
, unsigned char c
)
1238 struct moxa_port
*ch
= tty
->driver_data
;
1239 unsigned long flags
;
1243 spin_lock_irqsave(&moxa_lock
, flags
);
1244 MoxaPortWriteData(ch
, &c
, 1);
1245 spin_unlock_irqrestore(&moxa_lock
, flags
);
1246 /************************************************
1247 if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
1248 *************************************************/
1249 ch
->statusflags
|= LOWWAIT
;
1252 static int moxa_tiocmget(struct tty_struct
*tty
, struct file
*file
)
1254 struct moxa_port
*ch
= tty
->driver_data
;
1255 int flag
= 0, dtr
, rts
;
1260 MoxaPortGetLineOut(ch
, &dtr
, &rts
);
1265 dtr
= MoxaPortLineStatus(ch
);
1275 static int moxa_tiocmset(struct tty_struct
*tty
, struct file
*file
,
1276 unsigned int set
, unsigned int clear
)
1278 struct moxa_port
*ch
= tty
->driver_data
;
1286 MoxaPortGetLineOut(ch
, &dtr
, &rts
);
1287 if (set
& TIOCM_RTS
)
1289 if (set
& TIOCM_DTR
)
1291 if (clear
& TIOCM_RTS
)
1293 if (clear
& TIOCM_DTR
)
1295 MoxaPortLineCtrl(ch
, dtr
, rts
);
1299 static void moxa_throttle(struct tty_struct
*tty
)
1301 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1303 ch
->statusflags
|= THROTTLE
;
1306 static void moxa_unthrottle(struct tty_struct
*tty
)
1308 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1310 ch
->statusflags
&= ~THROTTLE
;
1313 static void moxa_set_termios(struct tty_struct
*tty
,
1314 struct ktermios
*old_termios
)
1316 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1320 moxa_set_tty_param(tty
, old_termios
);
1321 if (!(old_termios
->c_cflag
& CLOCAL
) &&
1322 (tty
->termios
->c_cflag
& CLOCAL
))
1323 wake_up_interruptible(&ch
->open_wait
);
1326 static void moxa_stop(struct tty_struct
*tty
)
1328 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1332 MoxaPortTxDisable(ch
);
1333 ch
->statusflags
|= TXSTOPPED
;
1337 static void moxa_start(struct tty_struct
*tty
)
1339 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1344 if (!(ch
->statusflags
& TXSTOPPED
))
1347 MoxaPortTxEnable(ch
);
1348 ch
->statusflags
&= ~TXSTOPPED
;
1351 static void moxa_hangup(struct tty_struct
*tty
)
1353 struct moxa_port
*ch
= (struct moxa_port
*) tty
->driver_data
;
1355 moxa_flush_buffer(tty
);
1358 ch
->asyncflags
&= ~ASYNC_NORMAL_ACTIVE
;
1360 wake_up_interruptible(&ch
->open_wait
);
1363 static void moxa_poll(unsigned long ignored
)
1365 struct moxa_port
*ch
;
1366 struct tty_struct
*tty
;
1370 del_timer(&moxaTimer
);
1372 if (MoxaDriverPoll() < 0) {
1373 mod_timer(&moxaTimer
, jiffies
+ HZ
/ 50);
1377 for (card
= 0; card
< MAX_BOARDS
; card
++) {
1378 if (!moxa_boards
[card
].ready
)
1380 ch
= moxa_boards
[card
].ports
;
1381 for (i
= 0; i
< moxa_boards
[card
].numPorts
; i
++, ch
++) {
1382 if ((ch
->asyncflags
& ASYNC_INITIALIZED
) == 0)
1384 if (!(ch
->statusflags
& THROTTLE
) &&
1385 (MoxaPortRxQueue(ch
) > 0))
1386 moxa_receive_data(ch
);
1390 if (ch
->statusflags
& LOWWAIT
) {
1391 if (MoxaPortTxQueue(ch
) <= WAKEUP_CHARS
) {
1392 if (!tty
->stopped
) {
1393 ch
->statusflags
&= ~LOWWAIT
;
1398 if (!I_IGNBRK(tty
) && (MoxaPortResetBrkCnt(ch
) > 0)) {
1399 tty_insert_flip_char(tty
, 0, TTY_BREAK
);
1400 tty_schedule_flip(tty
);
1402 if (MoxaPortDCDChange(ch
)) {
1403 if (ch
->asyncflags
& ASYNC_CHECK_CD
) {
1404 if (MoxaPortDCDON(ch
))
1405 wake_up_interruptible(&ch
->open_wait
);
1408 wake_up_interruptible(&ch
->open_wait
);
1409 ch
->asyncflags
&= ~ASYNC_NORMAL_ACTIVE
;
1416 mod_timer(&moxaTimer
, jiffies
+ HZ
/ 50);
1419 /******************************************************************************/
1421 static void moxa_set_tty_param(struct tty_struct
*tty
, struct ktermios
*old_termios
)
1423 register struct ktermios
*ts
;
1424 struct moxa_port
*ch
;
1425 int rts
, cts
, txflow
, rxflow
, xany
, baud
;
1427 ch
= (struct moxa_port
*) tty
->driver_data
;
1429 if (ts
->c_cflag
& CLOCAL
)
1430 ch
->asyncflags
&= ~ASYNC_CHECK_CD
;
1432 ch
->asyncflags
|= ASYNC_CHECK_CD
;
1433 rts
= cts
= txflow
= rxflow
= xany
= 0;
1434 if (ts
->c_cflag
& CRTSCTS
)
1436 if (ts
->c_iflag
& IXON
)
1438 if (ts
->c_iflag
& IXOFF
)
1440 if (ts
->c_iflag
& IXANY
)
1443 /* Clear the features we don't support */
1444 ts
->c_cflag
&= ~CMSPAR
;
1445 MoxaPortFlowCtrl(ch
, rts
, cts
, txflow
, rxflow
, xany
);
1446 baud
= MoxaPortSetTermio(ch
, ts
, tty_get_baud_rate(tty
));
1448 baud
= tty_termios_baud_rate(old_termios
);
1449 /* Not put the baud rate into the termios data */
1450 tty_encode_baud_rate(tty
, baud
, baud
);
1453 static int moxa_block_till_ready(struct tty_struct
*tty
, struct file
*filp
,
1454 struct moxa_port
*ch
)
1456 DECLARE_WAITQUEUE(wait
,current
);
1457 unsigned long flags
;
1459 int do_clocal
= C_CLOCAL(tty
);
1462 * If the device is in the middle of being closed, then block
1463 * until it's done, and then try again.
1465 if (tty_hung_up_p(filp
) || (ch
->asyncflags
& ASYNC_CLOSING
)) {
1466 if (ch
->asyncflags
& ASYNC_CLOSING
)
1467 wait_for_completion_interruptible(&ch
->close_wait
);
1468 #ifdef SERIAL_DO_RESTART
1469 if (ch
->asyncflags
& ASYNC_HUP_NOTIFY
)
1472 return (-ERESTARTSYS
);
1478 * If non-blocking mode is set, then make the check up front
1481 if (filp
->f_flags
& O_NONBLOCK
) {
1482 ch
->asyncflags
|= ASYNC_NORMAL_ACTIVE
;
1486 * Block waiting for the carrier detect and the line to become free
1489 add_wait_queue(&ch
->open_wait
, &wait
);
1490 pr_debug("block_til_ready before block: ttys%d, count = %d\n",
1491 tty
->index
, ch
->count
);
1492 spin_lock_irqsave(&moxa_lock
, flags
);
1493 if (!tty_hung_up_p(filp
))
1496 spin_unlock_irqrestore(&moxa_lock
, flags
);
1499 set_current_state(TASK_INTERRUPTIBLE
);
1500 if (tty_hung_up_p(filp
) ||
1501 !(ch
->asyncflags
& ASYNC_INITIALIZED
)) {
1502 #ifdef SERIAL_DO_RESTART
1503 if (ch
->asyncflags
& ASYNC_HUP_NOTIFY
)
1506 retval
= -ERESTARTSYS
;
1512 if (!(ch
->asyncflags
& ASYNC_CLOSING
) && (do_clocal
||
1516 if (signal_pending(current
)) {
1517 retval
= -ERESTARTSYS
;
1522 set_current_state(TASK_RUNNING
);
1523 remove_wait_queue(&ch
->open_wait
, &wait
);
1525 spin_lock_irqsave(&moxa_lock
, flags
);
1526 if (!tty_hung_up_p(filp
))
1529 spin_unlock_irqrestore(&moxa_lock
, flags
);
1530 pr_debug("block_til_ready after blocking: ttys%d, count = %d\n",
1531 tty
->index
, ch
->count
);
1534 /* FIXME: review to see if we need to use set_bit on these */
1535 ch
->asyncflags
|= ASYNC_NORMAL_ACTIVE
;
1539 static void moxa_setup_empty_event(struct tty_struct
*tty
)
1541 struct moxa_port
*ch
= tty
->driver_data
;
1542 unsigned long flags
;
1544 spin_lock_irqsave(&moxa_lock
, flags
);
1545 ch
->statusflags
|= EMPTYWAIT
;
1546 mod_timer(&ch
->emptyTimer
, jiffies
+ HZ
);
1547 spin_unlock_irqrestore(&moxa_lock
, flags
);
1550 static void moxa_check_xmit_empty(unsigned long data
)
1552 struct moxa_port
*ch
;
1554 ch
= (struct moxa_port
*) data
;
1555 if (ch
->tty
&& (ch
->statusflags
& EMPTYWAIT
)) {
1556 if (MoxaPortTxQueue(ch
) == 0) {
1557 ch
->statusflags
&= ~EMPTYWAIT
;
1558 tty_wakeup(ch
->tty
);
1561 mod_timer(&ch
->emptyTimer
, round_jiffies(jiffies
+ HZ
));
1563 ch
->statusflags
&= ~EMPTYWAIT
;
1566 static void moxa_shut_down(struct moxa_port
*ch
)
1568 struct tty_struct
*tp
;
1570 if (!(ch
->asyncflags
& ASYNC_INITIALIZED
))
1575 MoxaPortDisable(ch
);
1578 * If we're a modem control device and HUPCL is on, drop RTS & DTR.
1580 if (tp
->termios
->c_cflag
& HUPCL
)
1581 MoxaPortLineCtrl(ch
, 0, 0);
1583 ch
->asyncflags
&= ~ASYNC_INITIALIZED
;
1586 static void moxa_receive_data(struct moxa_port
*ch
)
1588 struct tty_struct
*tp
;
1589 struct ktermios
*ts
;
1590 unsigned long flags
;
1596 /**************************************************
1597 if ( !tp || !ts || !(ts->c_cflag & CREAD) ) {
1598 *****************************************************/
1600 MoxaPortFlushData(ch
, 0);
1603 spin_lock_irqsave(&moxa_lock
, flags
);
1604 MoxaPortReadData(ch
, tp
);
1605 spin_unlock_irqrestore(&moxa_lock
, flags
);
1606 tty_schedule_flip(tp
);
1613 #define DCD_changed 0x01
1614 #define DCD_oldstate 0x80
1616 static int moxaLowWaterChk
;
1618 static void moxa_low_water_check(void __iomem
*);
1620 /*****************************************************************************
1621 * Driver level functions: *
1622 * 3. MoxaDriverPoll(void); *
1623 *****************************************************************************/
1625 static void MoxaPortFlushData(struct moxa_port
*port
, int mode
)
1627 void __iomem
*ofsAddr
;
1628 if ((mode
< 0) || (mode
> 2))
1630 ofsAddr
= port
->tableAddr
;
1631 moxafunc(ofsAddr
, FC_FlushQueue
, mode
);
1633 port
->lowChkFlag
= 0;
1634 moxa_low_water_check(ofsAddr
);
1638 static int MoxaDriverPoll(void)
1640 struct moxa_board_conf
*brd
;
1641 struct moxa_port
*p
;
1642 void __iomem
*ofsAddr
;
1644 unsigned int port
, ports
, card
;
1647 for (card
= 0; card
< MAX_BOARDS
; card
++) {
1648 brd
= &moxa_boards
[card
];
1649 if (brd
->ready
== 0)
1651 if ((ports
= brd
->numPorts
) == 0)
1653 if (readb(brd
->intPend
) == 0xff) {
1654 ip
= brd
->intTable
+ readb(brd
->intNdx
);
1657 for (port
= 0; port
< ports
; port
+= 2, p
++) {
1658 temp
= readw(ip
+ port
);
1662 writew(0, ip
+ port
);
1663 ofsAddr
= p
->tableAddr
;
1665 writew(readw(ofsAddr
+ HostStat
) &
1666 ~WakeupTx
, ofsAddr
+ HostStat
);
1667 if (temp
& IntrBreak
)
1670 if (temp
& IntrLine
) {
1671 if (readb(ofsAddr
+ FlagStat
) & DCD_state
) {
1672 if ((p
->DCDState
& DCD_oldstate
) == 0)
1673 p
->DCDState
= (DCD_oldstate
|
1676 if (p
->DCDState
& DCD_oldstate
)
1677 p
->DCDState
= DCD_changed
;
1681 writeb(0, brd
->intPend
);
1683 if (moxaLowWaterChk
) {
1685 for (port
= 0; port
< ports
; port
++, p
++) {
1686 if (p
->lowChkFlag
) {
1688 ofsAddr
= p
->tableAddr
;
1689 moxa_low_water_check(ofsAddr
);
1694 moxaLowWaterChk
= 0;
1699 /*****************************************************************************
1700 * Port level functions: *
1701 * 2. MoxaPortEnable(int port); *
1702 * 3. MoxaPortDisable(int port); *
1703 * 4. MoxaPortGetMaxBaud(int port); *
1704 * 6. MoxaPortSetBaud(int port, long baud); *
1705 * 8. MoxaPortSetTermio(int port, unsigned char *termio); *
1706 * 9. MoxaPortGetLineOut(int port, int *dtrState, int *rtsState); *
1707 * 10. MoxaPortLineCtrl(int port, int dtrState, int rtsState); *
1708 * 11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany); *
1709 * 12. MoxaPortLineStatus(int port); *
1710 * 13. MoxaPortDCDChange(int port); *
1711 * 14. MoxaPortDCDON(int port); *
1712 * 15. MoxaPortFlushData(int port, int mode); *
1713 * 16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
1714 * 17. MoxaPortReadData(int port, struct tty_struct *tty); *
1715 * 20. MoxaPortTxQueue(int port); *
1716 * 21. MoxaPortTxFree(int port); *
1717 * 22. MoxaPortRxQueue(int port); *
1718 * 24. MoxaPortTxDisable(int port); *
1719 * 25. MoxaPortTxEnable(int port); *
1720 * 27. MoxaPortResetBrkCnt(int port); *
1721 *****************************************************************************/
1723 * Moxa Port Number Description:
1725 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1726 * the port number using in MOXA driver functions will be 0 to 31 for
1727 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1728 * to 127 for fourth. For example, if you setup three MOXA boards,
1729 * first board is C218, second board is C320-16 and third board is
1730 * C320-32. The port number of first board (C218 - 8 ports) is from
1731 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1732 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1733 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1734 * 127 will be invalid.
1737 * Moxa Functions Description:
1739 * Function 1: Driver initialization routine, this routine must be
1740 * called when initialized driver.
1742 * void MoxaDriverInit();
1745 * Function 2: Moxa driver private IOCTL command processing.
1747 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1749 * unsigned int cmd : IOCTL command
1750 * unsigned long arg : IOCTL argument
1751 * int port : port number (0 - 127)
1758 * Function 3: Moxa driver polling process routine.
1760 * int MoxaDriverPoll(void);
1762 * return: 0 ; polling O.K.
1763 * -1 : no any Moxa card.
1766 * Function 6: Enable this port to start Tx/Rx data.
1768 * void MoxaPortEnable(int port);
1769 * int port : port number (0 - 127)
1772 * Function 7: Disable this port
1774 * void MoxaPortDisable(int port);
1775 * int port : port number (0 - 127)
1778 * Function 8: Get the maximun available baud rate of this port.
1780 * long MoxaPortGetMaxBaud(int port);
1781 * int port : port number (0 - 127)
1783 * return: 0 : this port is invalid
1784 * 38400/57600/115200 bps
1787 * Function 10: Setting baud rate of this port.
1789 * long MoxaPortSetBaud(int port, long baud);
1790 * int port : port number (0 - 127)
1791 * long baud : baud rate (50 - 115200)
1793 * return: 0 : this port is invalid or baud < 50
1794 * 50 - 115200 : the real baud rate set to the port, if
1795 * the argument baud is large than maximun
1796 * available baud rate, the real setting
1797 * baud rate will be the maximun baud rate.
1800 * Function 12: Configure the port.
1802 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1803 * int port : port number (0 - 127)
1804 * struct ktermios * termio : termio structure pointer
1805 * speed_t baud : baud rate
1807 * return: -1 : this port is invalid or termio == NULL
1811 * Function 13: Get the DTR/RTS state of this port.
1813 * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1814 * int port : port number (0 - 127)
1815 * int * dtrState : pointer to INT to receive the current DTR
1816 * state. (if NULL, this function will not
1817 * write to this address)
1818 * int * rtsState : pointer to INT to receive the current RTS
1819 * state. (if NULL, this function will not
1820 * write to this address)
1822 * return: -1 : this port is invalid
1826 * Function 14: Setting the DTR/RTS output state of this port.
1828 * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1829 * int port : port number (0 - 127)
1830 * int dtrState : DTR output state (0: off, 1: on)
1831 * int rtsState : RTS output state (0: off, 1: on)
1834 * Function 15: Setting the flow control of this port.
1836 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1837 * int txFlow,int xany);
1838 * int port : port number (0 - 127)
1839 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1840 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1841 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1842 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1843 * int xany : S/W XANY flow control (0: no, 1: yes)
1846 * Function 16: Get ths line status of this port
1848 * int MoxaPortLineStatus(int port);
1849 * int port : port number (0 - 127)
1851 * return: Bit 0 - CTS state (0: off, 1: on)
1852 * Bit 1 - DSR state (0: off, 1: on)
1853 * Bit 2 - DCD state (0: off, 1: on)
1856 * Function 17: Check the DCD state has changed since the last read
1859 * int MoxaPortDCDChange(int port);
1860 * int port : port number (0 - 127)
1862 * return: 0 : no changed
1863 * 1 : DCD has changed
1866 * Function 18: Check ths current DCD state is ON or not.
1868 * int MoxaPortDCDON(int port);
1869 * int port : port number (0 - 127)
1871 * return: 0 : DCD off
1875 * Function 19: Flush the Rx/Tx buffer data of this port.
1877 * void MoxaPortFlushData(int port, int mode);
1878 * int port : port number (0 - 127)
1880 * 0 : flush the Rx buffer
1881 * 1 : flush the Tx buffer
1882 * 2 : flush the Rx and Tx buffer
1885 * Function 20: Write data.
1887 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1888 * int port : port number (0 - 127)
1889 * unsigned char * buffer : pointer to write data buffer.
1890 * int length : write data length
1892 * return: 0 - length : real write data length
1895 * Function 21: Read data.
1897 * int MoxaPortReadData(int port, struct tty_struct *tty);
1898 * int port : port number (0 - 127)
1899 * struct tty_struct *tty : tty for data
1901 * return: 0 - length : real read data length
1904 * Function 24: Get the Tx buffer current queued data bytes
1906 * int MoxaPortTxQueue(int port);
1907 * int port : port number (0 - 127)
1909 * return: .. : Tx buffer current queued data bytes
1912 * Function 25: Get the Tx buffer current free space
1914 * int MoxaPortTxFree(int port);
1915 * int port : port number (0 - 127)
1917 * return: .. : Tx buffer current free space
1920 * Function 26: Get the Rx buffer current queued data bytes
1922 * int MoxaPortRxQueue(int port);
1923 * int port : port number (0 - 127)
1925 * return: .. : Rx buffer current queued data bytes
1928 * Function 28: Disable port data transmission.
1930 * void MoxaPortTxDisable(int port);
1931 * int port : port number (0 - 127)
1934 * Function 29: Enable port data transmission.
1936 * void MoxaPortTxEnable(int port);
1937 * int port : port number (0 - 127)
1940 * Function 31: Get the received BREAK signal count and reset it.
1942 * int MoxaPortResetBrkCnt(int port);
1943 * int port : port number (0 - 127)
1945 * return: 0 - .. : BREAK signal count
1950 static void MoxaPortEnable(struct moxa_port
*port
)
1952 void __iomem
*ofsAddr
;
1953 short lowwater
= 512;
1955 ofsAddr
= port
->tableAddr
;
1956 writew(lowwater
, ofsAddr
+ Low_water
);
1958 if (port
->board
->boardType
== MOXA_BOARD_C320_ISA
||
1959 port
->board
->boardType
== MOXA_BOARD_C320_PCI
) {
1960 moxafunc(ofsAddr
, FC_SetBreakIrq
, 0);
1962 writew(readw(ofsAddr
+ HostStat
) | WakeupBreak
, ofsAddr
+ HostStat
);
1965 moxafunc(ofsAddr
, FC_SetLineIrq
, Magic_code
);
1966 moxafunc(ofsAddr
, FC_FlushQueue
, 2);
1968 moxafunc(ofsAddr
, FC_EnableCH
, Magic_code
);
1969 MoxaPortLineStatus(port
);
1972 static void MoxaPortDisable(struct moxa_port
*port
)
1974 void __iomem
*ofsAddr
= port
->tableAddr
;
1976 moxafunc(ofsAddr
, FC_SetFlowCtl
, 0); /* disable flow control */
1977 moxafunc(ofsAddr
, FC_ClrLineIrq
, Magic_code
);
1978 writew(0, ofsAddr
+ HostStat
);
1979 moxafunc(ofsAddr
, FC_DisableCH
, Magic_code
);
1982 static long MoxaPortGetMaxBaud(struct moxa_port
*port
)
1984 if (port
->board
->boardType
== MOXA_BOARD_C320_ISA
||
1985 port
->board
->boardType
== MOXA_BOARD_C320_PCI
)
1992 static long MoxaPortSetBaud(struct moxa_port
*port
, long baud
)
1994 void __iomem
*ofsAddr
;
1998 if ((baud
< 50L) || ((max
= MoxaPortGetMaxBaud(port
)) == 0))
2000 ofsAddr
= port
->tableAddr
;
2004 clock
= 614400L; /* for 9.8304 Mhz : max. 38400 bps */
2005 else if (max
== 57600L)
2006 clock
= 691200L; /* for 11.0592 Mhz : max. 57600 bps */
2008 clock
= 921600L; /* for 14.7456 Mhz : max. 115200 bps */
2010 moxafunc(ofsAddr
, FC_SetBaud
, val
);
2015 static int MoxaPortSetTermio(struct moxa_port
*port
, struct ktermios
*termio
,
2018 void __iomem
*ofsAddr
;
2022 ofsAddr
= port
->tableAddr
;
2023 cflag
= termio
->c_cflag
; /* termio->c_cflag */
2025 mode
= termio
->c_cflag
& CSIZE
;
2028 else if (mode
== CS6
)
2030 else if (mode
== CS7
)
2032 else if (mode
== CS8
)
2035 if (termio
->c_cflag
& CSTOPB
) {
2043 if (termio
->c_cflag
& PARENB
) {
2044 if (termio
->c_cflag
& PARODD
)
2051 moxafunc(ofsAddr
, FC_SetDataMode
, (ushort
) mode
);
2053 if (port
->board
->boardType
== MOXA_BOARD_C320_ISA
||
2054 port
->board
->boardType
== MOXA_BOARD_C320_PCI
) {
2055 if (baud
>= 921600L)
2058 baud
= MoxaPortSetBaud(port
, baud
);
2060 if (termio
->c_iflag
& (IXON
| IXOFF
| IXANY
)) {
2061 writeb(termio
->c_cc
[VSTART
], ofsAddr
+ FuncArg
);
2062 writeb(termio
->c_cc
[VSTOP
], ofsAddr
+ FuncArg1
);
2063 writeb(FC_SetXonXoff
, ofsAddr
+ FuncCode
);
2064 moxa_wait_finish(ofsAddr
);
2070 static int MoxaPortGetLineOut(struct moxa_port
*port
, int *dtrState
,
2075 *dtrState
= !!(port
->lineCtrl
& DTR_ON
);
2077 *rtsState
= !!(port
->lineCtrl
& RTS_ON
);
2082 static void MoxaPortLineCtrl(struct moxa_port
*port
, int dtr
, int rts
)
2090 port
->lineCtrl
= mode
;
2091 moxafunc(port
->tableAddr
, FC_LineControl
, mode
);
2094 static void MoxaPortFlowCtrl(struct moxa_port
*port
, int rts
, int cts
,
2095 int txflow
, int rxflow
, int txany
)
2100 mode
|= RTS_FlowCtl
;
2102 mode
|= CTS_FlowCtl
;
2109 moxafunc(port
->tableAddr
, FC_SetFlowCtl
, mode
);
2112 static int MoxaPortLineStatus(struct moxa_port
*port
)
2114 void __iomem
*ofsAddr
;
2117 ofsAddr
= port
->tableAddr
;
2118 if (port
->board
->boardType
== MOXA_BOARD_C320_ISA
||
2119 port
->board
->boardType
== MOXA_BOARD_C320_PCI
) {
2120 moxafunc(ofsAddr
, FC_LineStatus
, 0);
2121 val
= readw(ofsAddr
+ FuncArg
);
2123 val
= readw(ofsAddr
+ FlagStat
) >> 4;
2128 if ((port
->DCDState
& DCD_oldstate
) == 0)
2129 port
->DCDState
= (DCD_oldstate
| DCD_changed
);
2131 if (port
->DCDState
& DCD_oldstate
)
2132 port
->DCDState
= DCD_changed
;
2138 static int MoxaPortDCDChange(struct moxa_port
*port
)
2143 port
->DCDState
&= ~DCD_changed
;
2148 static int MoxaPortDCDON(struct moxa_port
*port
)
2152 if (port
->DCDState
& DCD_oldstate
)
2159 static int MoxaPortWriteData(struct moxa_port
*port
, unsigned char *buffer
,
2165 ushort head
, tx_mask
, spage
, epage
;
2166 ushort pageno
, pageofs
, bufhead
;
2167 void __iomem
*baseAddr
, *ofsAddr
, *ofs
;
2169 ofsAddr
= port
->tableAddr
;
2170 baseAddr
= port
->board
->basemem
;
2171 tx_mask
= readw(ofsAddr
+ TX_mask
);
2172 spage
= readw(ofsAddr
+ Page_txb
);
2173 epage
= readw(ofsAddr
+ EndPage_txb
);
2174 tail
= readw(ofsAddr
+ TXwptr
);
2175 head
= readw(ofsAddr
+ TXrptr
);
2176 c
= (head
> tail
) ? (head
- tail
- 1)
2177 : (head
- tail
+ tx_mask
);
2180 moxaLog
.txcnt
[port
->tty
->index
] += c
;
2182 if (spage
== epage
) {
2183 bufhead
= readw(ofsAddr
+ Ofs_txb
);
2184 writew(spage
, baseAddr
+ Control_reg
);
2187 len
= head
- tail
- 1;
2189 len
= tx_mask
+ 1 - tail
;
2190 len
= (c
> len
) ? len
: c
;
2191 ofs
= baseAddr
+ DynPage_addr
+ bufhead
+ tail
;
2192 for (i
= 0; i
< len
; i
++)
2193 writeb(*buffer
++, ofs
+ i
);
2194 tail
= (tail
+ len
) & tx_mask
;
2197 writew(tail
, ofsAddr
+ TXwptr
);
2200 pageno
= spage
+ (tail
>> 13);
2201 pageofs
= tail
& Page_mask
;
2203 cnt
= Page_size
- pageofs
;
2207 writeb(pageno
, baseAddr
+ Control_reg
);
2208 ofs
= baseAddr
+ DynPage_addr
+ pageofs
;
2209 for (i
= 0; i
< cnt
; i
++)
2210 writeb(*buffer
++, ofs
+ i
);
2212 writew((tail
+ len
) & tx_mask
, ofsAddr
+ TXwptr
);
2215 if (++pageno
== epage
)
2220 writeb(1, ofsAddr
+ CD180TXirq
); /* start to send */
2224 static int MoxaPortReadData(struct moxa_port
*port
, struct tty_struct
*tty
)
2226 register ushort head
, pageofs
;
2227 int i
, count
, cnt
, len
, total
, remain
;
2228 ushort tail
, rx_mask
, spage
, epage
;
2229 ushort pageno
, bufhead
;
2230 void __iomem
*baseAddr
, *ofsAddr
, *ofs
;
2232 ofsAddr
= port
->tableAddr
;
2233 baseAddr
= port
->board
->basemem
;
2234 head
= readw(ofsAddr
+ RXrptr
);
2235 tail
= readw(ofsAddr
+ RXwptr
);
2236 rx_mask
= readw(ofsAddr
+ RX_mask
);
2237 spage
= readw(ofsAddr
+ Page_rxb
);
2238 epage
= readw(ofsAddr
+ EndPage_rxb
);
2239 count
= (tail
>= head
) ? (tail
- head
)
2240 : (tail
- head
+ rx_mask
+ 1);
2245 remain
= count
- total
;
2246 moxaLog
.rxcnt
[port
->tty
->index
] += total
;
2248 if (spage
== epage
) {
2249 bufhead
= readw(ofsAddr
+ Ofs_rxb
);
2250 writew(spage
, baseAddr
+ Control_reg
);
2255 len
= rx_mask
+ 1 - head
;
2256 len
= (count
> len
) ? len
: count
;
2257 ofs
= baseAddr
+ DynPage_addr
+ bufhead
+ head
;
2258 for (i
= 0; i
< len
; i
++)
2259 tty_insert_flip_char(tty
, readb(ofs
+ i
), TTY_NORMAL
);
2260 head
= (head
+ len
) & rx_mask
;
2263 writew(head
, ofsAddr
+ RXrptr
);
2266 pageno
= spage
+ (head
>> 13);
2267 pageofs
= head
& Page_mask
;
2269 cnt
= Page_size
- pageofs
;
2273 writew(pageno
, baseAddr
+ Control_reg
);
2274 ofs
= baseAddr
+ DynPage_addr
+ pageofs
;
2275 for (i
= 0; i
< cnt
; i
++)
2276 tty_insert_flip_char(tty
, readb(ofs
+ i
), TTY_NORMAL
);
2278 writew((head
+ len
) & rx_mask
, ofsAddr
+ RXrptr
);
2281 if (++pageno
== epage
)
2286 if ((readb(ofsAddr
+ FlagStat
) & Xoff_state
) && (remain
< LowWater
)) {
2287 moxaLowWaterChk
= 1;
2288 port
->lowChkFlag
= 1;
2294 static int MoxaPortTxQueue(struct moxa_port
*port
)
2296 void __iomem
*ofsAddr
= port
->tableAddr
;
2297 ushort rptr
, wptr
, mask
;
2300 rptr
= readw(ofsAddr
+ TXrptr
);
2301 wptr
= readw(ofsAddr
+ TXwptr
);
2302 mask
= readw(ofsAddr
+ TX_mask
);
2303 len
= (wptr
- rptr
) & mask
;
2307 static int MoxaPortTxFree(struct moxa_port
*port
)
2309 void __iomem
*ofsAddr
= port
->tableAddr
;
2310 ushort rptr
, wptr
, mask
;
2313 rptr
= readw(ofsAddr
+ TXrptr
);
2314 wptr
= readw(ofsAddr
+ TXwptr
);
2315 mask
= readw(ofsAddr
+ TX_mask
);
2316 len
= mask
- ((wptr
- rptr
) & mask
);
2320 static int MoxaPortRxQueue(struct moxa_port
*port
)
2322 void __iomem
*ofsAddr
= port
->tableAddr
;
2323 ushort rptr
, wptr
, mask
;
2326 rptr
= readw(ofsAddr
+ RXrptr
);
2327 wptr
= readw(ofsAddr
+ RXwptr
);
2328 mask
= readw(ofsAddr
+ RX_mask
);
2329 len
= (wptr
- rptr
) & mask
;
2334 static void MoxaPortTxDisable(struct moxa_port
*port
)
2336 moxafunc(port
->tableAddr
, FC_SetXoffState
, Magic_code
);
2339 static void MoxaPortTxEnable(struct moxa_port
*port
)
2341 moxafunc(port
->tableAddr
, FC_SetXonState
, Magic_code
);
2345 static int MoxaPortResetBrkCnt(struct moxa_port
*port
)
2348 cnt
= port
->breakCnt
;
2353 static int moxa_get_serial_info(struct moxa_port
*info
,
2354 struct serial_struct __user
*retinfo
)
2356 struct serial_struct tmp
;
2358 memset(&tmp
, 0, sizeof(tmp
));
2359 tmp
.type
= info
->type
;
2360 tmp
.line
= info
->tty
->index
;
2363 tmp
.flags
= info
->asyncflags
;
2364 tmp
.baud_base
= 921600;
2365 tmp
.close_delay
= info
->close_delay
;
2366 tmp
.custom_divisor
= 0;
2368 if(copy_to_user(retinfo
, &tmp
, sizeof(*retinfo
)))
2374 static int moxa_set_serial_info(struct moxa_port
*info
,
2375 struct serial_struct __user
*new_info
)
2377 struct serial_struct new_serial
;
2379 if(copy_from_user(&new_serial
, new_info
, sizeof(new_serial
)))
2382 if ((new_serial
.irq
!= 0) ||
2383 (new_serial
.port
!= 0) ||
2384 // (new_serial.type != info->type) ||
2385 (new_serial
.custom_divisor
!= 0) ||
2386 (new_serial
.baud_base
!= 921600))
2389 if (!capable(CAP_SYS_ADMIN
)) {
2390 if (((new_serial
.flags
& ~ASYNC_USR_MASK
) !=
2391 (info
->asyncflags
& ~ASYNC_USR_MASK
)))
2394 info
->close_delay
= new_serial
.close_delay
* HZ
/ 100;
2397 new_serial
.flags
= (new_serial
.flags
& ~ASYNC_FLAGS
);
2398 new_serial
.flags
|= (info
->asyncflags
& ASYNC_FLAGS
);
2400 if (new_serial
.type
== PORT_16550A
) {
2401 MoxaSetFifo(info
, 1);
2403 MoxaSetFifo(info
, 0);
2406 info
->type
= new_serial
.type
;
2412 /*****************************************************************************
2413 * Static local functions: *
2414 *****************************************************************************/
2416 static void moxa_low_water_check(void __iomem
*ofsAddr
)
2419 ushort rptr
, wptr
, mask
;
2421 if (readb(ofsAddr
+ FlagStat
) & Xoff_state
) {
2422 rptr
= readw(ofsAddr
+ RXrptr
);
2423 wptr
= readw(ofsAddr
+ RXwptr
);
2424 mask
= readw(ofsAddr
+ RX_mask
);
2425 len
= (wptr
- rptr
) & mask
;
2426 if (len
<= Low_water
)
2427 moxafunc(ofsAddr
, FC_SendXon
, 0);
2431 static void MoxaSetFifo(struct moxa_port
*port
, int enable
)
2433 void __iomem
*ofsAddr
= port
->tableAddr
;
2436 moxafunc(ofsAddr
, FC_SetRxFIFOTrig
, 0);
2437 moxafunc(ofsAddr
, FC_SetTxFIFOCnt
, 1);
2439 moxafunc(ofsAddr
, FC_SetRxFIFOTrig
, 3);
2440 moxafunc(ofsAddr
, FC_SetTxFIFOCnt
, 16);