Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

[deliverable/linux.git] / drivers / clk / bcm / clk-bcm2835.c

/*
 * Copyright (C) 2010,2015 Broadcom
 * Copyright (C) 2012 Stephen Warren
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

/**
 * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
 *
 * The clock tree on the 2835 has several levels.  There's a root
 * oscillator running at 19.2Mhz.  After the oscillator there are 5
 * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
 * and "HDMI displays".  Those 5 PLLs each can divide their output to
 * produce up to 4 channels.  Finally, there is the level of clocks to
 * be consumed by other hardware components (like "H264" or "HDMI
 * state machine"), which divide off of some subset of the PLL
 * channels.
 *
 * All of the clocks in the tree are exposed in the DT, because the DT
 * may want to make assignments of the final layer of clocks to the
 * PLL channels, and some components of the hardware will actually
 * skip layers of the tree (for example, the pixel clock comes
 * directly from the PLLH PIX channel without using a CM_*CTL clock
 * generator).
 */

#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/bcm2835.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <dt-bindings/clock/bcm2835.h>

#define CM_PASSWORD             0x5a000000

#define CM_GNRICCTL             0x000
#define CM_GNRICDIV             0x004
# define CM_DIV_FRAC_BITS       12

#define CM_VPUCTL               0x008
#define CM_VPUDIV               0x00c
#define CM_SYSCTL               0x010
#define CM_SYSDIV               0x014
#define CM_PERIACTL             0x018
#define CM_PERIADIV             0x01c
#define CM_PERIICTL             0x020
#define CM_PERIIDIV             0x024
#define CM_H264CTL              0x028
#define CM_H264DIV              0x02c
#define CM_ISPCTL               0x030
#define CM_ISPDIV               0x034
#define CM_V3DCTL               0x038
#define CM_V3DDIV               0x03c
#define CM_CAM0CTL              0x040
#define CM_CAM0DIV              0x044
#define CM_CAM1CTL              0x048
#define CM_CAM1DIV              0x04c
#define CM_CCP2CTL              0x050
#define CM_CCP2DIV              0x054
#define CM_DSI0ECTL             0x058
#define CM_DSI0EDIV             0x05c
#define CM_DSI0PCTL             0x060
#define CM_DSI0PDIV             0x064
#define CM_DPICTL               0x068
#define CM_DPIDIV               0x06c
#define CM_GP0CTL               0x070
#define CM_GP0DIV               0x074
#define CM_GP1CTL               0x078
#define CM_GP1DIV               0x07c
#define CM_GP2CTL               0x080
#define CM_GP2DIV               0x084
#define CM_HSMCTL               0x088
#define CM_HSMDIV               0x08c
#define CM_OTPCTL               0x090
#define CM_OTPDIV               0x094
#define CM_PWMCTL               0x0a0
#define CM_PWMDIV               0x0a4
#define CM_SMICTL               0x0b0
#define CM_SMIDIV               0x0b4
#define CM_TSENSCTL             0x0e0
#define CM_TSENSDIV             0x0e4
#define CM_TIMERCTL             0x0e8
#define CM_TIMERDIV             0x0ec
#define CM_UARTCTL              0x0f0
#define CM_UARTDIV              0x0f4
#define CM_VECCTL               0x0f8
#define CM_VECDIV               0x0fc
#define CM_PULSECTL             0x190
#define CM_PULSEDIV             0x194
#define CM_SDCCTL               0x1a8
#define CM_SDCDIV               0x1ac
#define CM_ARMCTL               0x1b0
#define CM_EMMCCTL              0x1c0
#define CM_EMMCDIV              0x1c4

/* General bits for the CM_*CTL regs */
# define CM_ENABLE                      BIT(4)
# define CM_KILL                        BIT(5)
# define CM_GATE_BIT                    6
# define CM_GATE                        BIT(CM_GATE_BIT)
# define CM_BUSY                        BIT(7)
# define CM_BUSYD                       BIT(8)
# define CM_SRC_SHIFT                   0
# define CM_SRC_BITS                    4
# define CM_SRC_MASK                    0xf
# define CM_SRC_GND                     0
# define CM_SRC_OSC                     1
# define CM_SRC_TESTDEBUG0              2
# define CM_SRC_TESTDEBUG1              3
# define CM_SRC_PLLA_CORE               4
# define CM_SRC_PLLA_PER                4
# define CM_SRC_PLLC_CORE0              5
# define CM_SRC_PLLC_PER                5
# define CM_SRC_PLLC_CORE1              8
# define CM_SRC_PLLD_CORE               6
# define CM_SRC_PLLD_PER                6
# define CM_SRC_PLLH_AUX                7
# define CM_SRC_PLLC_CORE1              8
# define CM_SRC_PLLC_CORE2              9

#define CM_OSCCOUNT             0x100

#define CM_PLLA                 0x104
# define CM_PLL_ANARST                  BIT(8)
# define CM_PLLA_HOLDPER                BIT(7)
# define CM_PLLA_LOADPER                BIT(6)
# define CM_PLLA_HOLDCORE               BIT(5)
# define CM_PLLA_LOADCORE               BIT(4)
# define CM_PLLA_HOLDCCP2               BIT(3)
# define CM_PLLA_LOADCCP2               BIT(2)
# define CM_PLLA_HOLDDSI0               BIT(1)
# define CM_PLLA_LOADDSI0               BIT(0)

#define CM_PLLC                 0x108
# define CM_PLLC_HOLDPER                BIT(7)
# define CM_PLLC_LOADPER                BIT(6)
# define CM_PLLC_HOLDCORE2              BIT(5)
# define CM_PLLC_LOADCORE2              BIT(4)
# define CM_PLLC_HOLDCORE1              BIT(3)
# define CM_PLLC_LOADCORE1              BIT(2)
# define CM_PLLC_HOLDCORE0              BIT(1)
# define CM_PLLC_LOADCORE0              BIT(0)

#define CM_PLLD                 0x10c
# define CM_PLLD_HOLDPER                BIT(7)
# define CM_PLLD_LOADPER                BIT(6)
# define CM_PLLD_HOLDCORE               BIT(5)
# define CM_PLLD_LOADCORE               BIT(4)
# define CM_PLLD_HOLDDSI1               BIT(3)
# define CM_PLLD_LOADDSI1               BIT(2)
# define CM_PLLD_HOLDDSI0               BIT(1)
# define CM_PLLD_LOADDSI0               BIT(0)

#define CM_PLLH                 0x110
# define CM_PLLH_LOADRCAL               BIT(2)
# define CM_PLLH_LOADAUX                BIT(1)
# define CM_PLLH_LOADPIX                BIT(0)

#define CM_LOCK                 0x114
# define CM_LOCK_FLOCKH                 BIT(12)
# define CM_LOCK_FLOCKD                 BIT(11)
# define CM_LOCK_FLOCKC                 BIT(10)
# define CM_LOCK_FLOCKB                 BIT(9)
# define CM_LOCK_FLOCKA                 BIT(8)

#define CM_EVENT                0x118
#define CM_DSI1ECTL             0x158
#define CM_DSI1EDIV             0x15c
#define CM_DSI1PCTL             0x160
#define CM_DSI1PDIV             0x164
#define CM_DFTCTL               0x168
#define CM_DFTDIV               0x16c

#define CM_PLLB                 0x170
# define CM_PLLB_HOLDARM                BIT(1)
# define CM_PLLB_LOADARM                BIT(0)

#define A2W_PLLA_CTRL           0x1100
#define A2W_PLLC_CTRL           0x1120
#define A2W_PLLD_CTRL           0x1140
#define A2W_PLLH_CTRL           0x1160
#define A2W_PLLB_CTRL           0x11e0
# define A2W_PLL_CTRL_PRST_DISABLE      BIT(17)
# define A2W_PLL_CTRL_PWRDN             BIT(16)
# define A2W_PLL_CTRL_PDIV_MASK         0x000007000
# define A2W_PLL_CTRL_PDIV_SHIFT        12
# define A2W_PLL_CTRL_NDIV_MASK         0x0000003ff
# define A2W_PLL_CTRL_NDIV_SHIFT        0

#define A2W_PLLA_ANA0           0x1010
#define A2W_PLLC_ANA0           0x1030
#define A2W_PLLD_ANA0           0x1050
#define A2W_PLLH_ANA0           0x1070
#define A2W_PLLB_ANA0           0x10f0

#define A2W_PLL_KA_SHIFT        7
#define A2W_PLL_KA_MASK         GENMASK(9, 7)
#define A2W_PLL_KI_SHIFT        19
#define A2W_PLL_KI_MASK         GENMASK(21, 19)
#define A2W_PLL_KP_SHIFT        15
#define A2W_PLL_KP_MASK         GENMASK(18, 15)

#define A2W_PLLH_KA_SHIFT       19
#define A2W_PLLH_KA_MASK        GENMASK(21, 19)
#define A2W_PLLH_KI_LOW_SHIFT   22
#define A2W_PLLH_KI_LOW_MASK    GENMASK(23, 22)
#define A2W_PLLH_KI_HIGH_SHIFT  0
#define A2W_PLLH_KI_HIGH_MASK   GENMASK(0, 0)
#define A2W_PLLH_KP_SHIFT       1
#define A2W_PLLH_KP_MASK        GENMASK(4, 1)

#define A2W_XOSC_CTRL           0x1190
# define A2W_XOSC_CTRL_PLLB_ENABLE      BIT(7)
# define A2W_XOSC_CTRL_PLLA_ENABLE      BIT(6)
# define A2W_XOSC_CTRL_PLLD_ENABLE      BIT(5)
# define A2W_XOSC_CTRL_DDR_ENABLE       BIT(4)
# define A2W_XOSC_CTRL_CPR1_ENABLE      BIT(3)
# define A2W_XOSC_CTRL_USB_ENABLE       BIT(2)
# define A2W_XOSC_CTRL_HDMI_ENABLE      BIT(1)
# define A2W_XOSC_CTRL_PLLC_ENABLE      BIT(0)

#define A2W_PLLA_FRAC           0x1200
#define A2W_PLLC_FRAC           0x1220
#define A2W_PLLD_FRAC           0x1240
#define A2W_PLLH_FRAC           0x1260
#define A2W_PLLB_FRAC           0x12e0
# define A2W_PLL_FRAC_MASK              ((1 << A2W_PLL_FRAC_BITS) - 1)
# define A2W_PLL_FRAC_BITS              20

#define A2W_PLL_CHANNEL_DISABLE         BIT(8)
#define A2W_PLL_DIV_BITS                8
#define A2W_PLL_DIV_SHIFT               0

#define A2W_PLLA_DSI0           0x1300
#define A2W_PLLA_CORE           0x1400
#define A2W_PLLA_PER            0x1500
#define A2W_PLLA_CCP2           0x1600

#define A2W_PLLC_CORE2          0x1320
#define A2W_PLLC_CORE1          0x1420
#define A2W_PLLC_PER            0x1520
#define A2W_PLLC_CORE0          0x1620

#define A2W_PLLD_DSI0           0x1340
#define A2W_PLLD_CORE           0x1440
#define A2W_PLLD_PER            0x1540
#define A2W_PLLD_DSI1           0x1640

#define A2W_PLLH_AUX            0x1360
#define A2W_PLLH_RCAL           0x1460
#define A2W_PLLH_PIX            0x1560
#define A2W_PLLH_STS            0x1660

#define A2W_PLLH_CTRLR          0x1960
#define A2W_PLLH_FRACR          0x1a60
#define A2W_PLLH_AUXR           0x1b60
#define A2W_PLLH_RCALR          0x1c60
#define A2W_PLLH_PIXR           0x1d60
#define A2W_PLLH_STSR           0x1e60

#define A2W_PLLB_ARM            0x13e0
#define A2W_PLLB_SP0            0x14e0
#define A2W_PLLB_SP1            0x15e0
#define A2W_PLLB_SP2            0x16e0

#define LOCK_TIMEOUT_NS         100000000
#define BCM2835_MAX_FB_RATE     1750000000u

struct bcm2835_cprman {
        struct device *dev;
        void __iomem *regs;
        spinlock_t regs_lock;
        const char *osc_name;

        struct clk_onecell_data onecell;
        struct clk *clks[BCM2835_CLOCK_COUNT];
};

static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
{
        writel(CM_PASSWORD | val, cprman->regs + reg);
}

static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
{
        return readl(cprman->regs + reg);
}

/*
 * These are fixed clocks. They're probably not all root clocks and it may
 * be possible to turn them on and off but until this is mapped out better
 * it's the only way they can be used.
 */
void __init bcm2835_init_clocks(void)
{
        struct clk *clk;
        int ret;

        clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
                                        126000000);
        if (IS_ERR(clk))
                pr_err("apb_pclk not registered\n");

        clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
                                        3000000);
        if (IS_ERR(clk))
                pr_err("uart0_pclk not registered\n");
        ret = clk_register_clkdev(clk, NULL, "20201000.uart");
        if (ret)
                pr_err("uart0_pclk alias not registered\n");

        clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
                                        125000000);
        if (IS_ERR(clk))
                pr_err("uart1_pclk not registered\n");
        ret = clk_register_clkdev(clk, NULL, "20215000.uart");
        if (ret)
                pr_err("uart1_pclk alias not registered\n");
}

struct bcm2835_pll_data {
        const char *name;
        u32 cm_ctrl_reg;
        u32 a2w_ctrl_reg;
        u32 frac_reg;
        u32 ana_reg_base;
        u32 reference_enable_mask;
        /* Bit in CM_LOCK to indicate when the PLL has locked. */
        u32 lock_mask;

        const struct bcm2835_pll_ana_bits *ana;

        unsigned long min_rate;
        unsigned long max_rate;
        /*
         * Highest rate for the VCO before we have to use the
         * pre-divide-by-2.
         */
        unsigned long max_fb_rate;
};

struct bcm2835_pll_ana_bits {
        u32 mask0;
        u32 set0;
        u32 mask1;
        u32 set1;
        u32 mask3;
        u32 set3;
        u32 fb_prediv_mask;
};

static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
        .mask0 = 0,
        .set0 = 0,
        .mask1 = ~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
        .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
        .mask3 = ~A2W_PLL_KA_MASK,
        .set3 = (2 << A2W_PLL_KA_SHIFT),
        .fb_prediv_mask = BIT(14),
};

static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
        .mask0 = ~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
        .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
        .mask1 = ~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
        .set1 = (6 << A2W_PLLH_KP_SHIFT),
        .mask3 = 0,
        .set3 = 0,
        .fb_prediv_mask = BIT(11),
};

/*
 * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
 * Port 2) transmitter clock.
 *
 * It is in the PX LDO power domain, which is on when the AUDIO domain
 * is on.
 */
static const struct bcm2835_pll_data bcm2835_plla_data = {
        .name = "plla",
        .cm_ctrl_reg = CM_PLLA,
        .a2w_ctrl_reg = A2W_PLLA_CTRL,
        .frac_reg = A2W_PLLA_FRAC,
        .ana_reg_base = A2W_PLLA_ANA0,
        .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
        .lock_mask = CM_LOCK_FLOCKA,

        .ana = &bcm2835_ana_default,

        .min_rate = 600000000u,
        .max_rate = 2400000000u,
        .max_fb_rate = BCM2835_MAX_FB_RATE,
};

/* PLLB is used for the ARM's clock. */
static const struct bcm2835_pll_data bcm2835_pllb_data = {
        .name = "pllb",
        .cm_ctrl_reg = CM_PLLB,
        .a2w_ctrl_reg = A2W_PLLB_CTRL,
        .frac_reg = A2W_PLLB_FRAC,
        .ana_reg_base = A2W_PLLB_ANA0,
        .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
        .lock_mask = CM_LOCK_FLOCKB,

        .ana = &bcm2835_ana_default,

        .min_rate = 600000000u,
        .max_rate = 3000000000u,
        .max_fb_rate = BCM2835_MAX_FB_RATE,
};

/*
 * PLLC is the core PLL, used to drive the core VPU clock.
 *
 * It is in the PX LDO power domain, which is on when the AUDIO domain
 * is on.
*/
static const struct bcm2835_pll_data bcm2835_pllc_data = {
        .name = "pllc",
        .cm_ctrl_reg = CM_PLLC,
        .a2w_ctrl_reg = A2W_PLLC_CTRL,
        .frac_reg = A2W_PLLC_FRAC,
        .ana_reg_base = A2W_PLLC_ANA0,
        .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
        .lock_mask = CM_LOCK_FLOCKC,

        .ana = &bcm2835_ana_default,

        .min_rate = 600000000u,
        .max_rate = 3000000000u,
        .max_fb_rate = BCM2835_MAX_FB_RATE,
};

/*
 * PLLD is the display PLL, used to drive DSI display panels.
 *
 * It is in the PX LDO power domain, which is on when the AUDIO domain
 * is on.
 */
static const struct bcm2835_pll_data bcm2835_plld_data = {
        .name = "plld",
        .cm_ctrl_reg = CM_PLLD,
        .a2w_ctrl_reg = A2W_PLLD_CTRL,
        .frac_reg = A2W_PLLD_FRAC,
        .ana_reg_base = A2W_PLLD_ANA0,
        .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
        .lock_mask = CM_LOCK_FLOCKD,

        .ana = &bcm2835_ana_default,

        .min_rate = 600000000u,
        .max_rate = 2400000000u,
        .max_fb_rate = BCM2835_MAX_FB_RATE,
};

/*
 * PLLH is used to supply the pixel clock or the AUX clock for the TV
 * encoder.
 *
 * It is in the HDMI power domain.
 */
static const struct bcm2835_pll_data bcm2835_pllh_data = {
        "pllh",
        .cm_ctrl_reg = CM_PLLH,
        .a2w_ctrl_reg = A2W_PLLH_CTRL,
        .frac_reg = A2W_PLLH_FRAC,
        .ana_reg_base = A2W_PLLH_ANA0,
        .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
        .lock_mask = CM_LOCK_FLOCKH,

        .ana = &bcm2835_ana_pllh,

        .min_rate = 600000000u,
        .max_rate = 3000000000u,
        .max_fb_rate = BCM2835_MAX_FB_RATE,
};

struct bcm2835_pll_divider_data {
        const char *name;
        const struct bcm2835_pll_data *source_pll;
        u32 cm_reg;
        u32 a2w_reg;

        u32 load_mask;
        u32 hold_mask;
        u32 fixed_divider;
};

static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
        .name = "plla_core",
        .source_pll = &bcm2835_plla_data,
        .cm_reg = CM_PLLA,
        .a2w_reg = A2W_PLLA_CORE,
        .load_mask = CM_PLLA_LOADCORE,
        .hold_mask = CM_PLLA_HOLDCORE,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
        .name = "plla_per",
        .source_pll = &bcm2835_plla_data,
        .cm_reg = CM_PLLA,
        .a2w_reg = A2W_PLLA_PER,
        .load_mask = CM_PLLA_LOADPER,
        .hold_mask = CM_PLLA_HOLDPER,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
        .name = "pllb_arm",
        .source_pll = &bcm2835_pllb_data,
        .cm_reg = CM_PLLB,
        .a2w_reg = A2W_PLLB_ARM,
        .load_mask = CM_PLLB_LOADARM,
        .hold_mask = CM_PLLB_HOLDARM,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
        .name = "pllc_core0",
        .source_pll = &bcm2835_pllc_data,
        .cm_reg = CM_PLLC,
        .a2w_reg = A2W_PLLC_CORE0,
        .load_mask = CM_PLLC_LOADCORE0,
        .hold_mask = CM_PLLC_HOLDCORE0,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
        .name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
        .cm_reg = CM_PLLC, A2W_PLLC_CORE1,
        .load_mask = CM_PLLC_LOADCORE1,
        .hold_mask = CM_PLLC_HOLDCORE1,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
        .name = "pllc_core2",
        .source_pll = &bcm2835_pllc_data,
        .cm_reg = CM_PLLC,
        .a2w_reg = A2W_PLLC_CORE2,
        .load_mask = CM_PLLC_LOADCORE2,
        .hold_mask = CM_PLLC_HOLDCORE2,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
        .name = "pllc_per",
        .source_pll = &bcm2835_pllc_data,
        .cm_reg = CM_PLLC,
        .a2w_reg = A2W_PLLC_PER,
        .load_mask = CM_PLLC_LOADPER,
        .hold_mask = CM_PLLC_HOLDPER,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
        .name = "plld_core",
        .source_pll = &bcm2835_plld_data,
        .cm_reg = CM_PLLD,
        .a2w_reg = A2W_PLLD_CORE,
        .load_mask = CM_PLLD_LOADCORE,
        .hold_mask = CM_PLLD_HOLDCORE,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
        .name = "plld_per",
        .source_pll = &bcm2835_plld_data,
        .cm_reg = CM_PLLD,
        .a2w_reg = A2W_PLLD_PER,
        .load_mask = CM_PLLD_LOADPER,
        .hold_mask = CM_PLLD_HOLDPER,
        .fixed_divider = 1,
};

static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
        .name = "pllh_rcal",
        .source_pll = &bcm2835_pllh_data,
        .cm_reg = CM_PLLH,
        .a2w_reg = A2W_PLLH_RCAL,
        .load_mask = CM_PLLH_LOADRCAL,
        .hold_mask = 0,
        .fixed_divider = 10,
};

static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
        .name = "pllh_aux",
        .source_pll = &bcm2835_pllh_data,
        .cm_reg = CM_PLLH,
        .a2w_reg = A2W_PLLH_AUX,
        .load_mask = CM_PLLH_LOADAUX,
        .hold_mask = 0,
        .fixed_divider = 10,
};

static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
        .name = "pllh_pix",
        .source_pll = &bcm2835_pllh_data,
        .cm_reg = CM_PLLH,
        .a2w_reg = A2W_PLLH_PIX,
        .load_mask = CM_PLLH_LOADPIX,
        .hold_mask = 0,
        .fixed_divider = 10,
};

struct bcm2835_clock_data {
        const char *name;

        const char *const *parents;
        int num_mux_parents;

        u32 ctl_reg;
        u32 div_reg;

        /* Number of integer bits in the divider */
        u32 int_bits;
        /* Number of fractional bits in the divider */
        u32 frac_bits;

        bool is_vpu_clock;
};

static const char *const bcm2835_clock_per_parents[] = {
        "gnd",
        "xosc",
        "testdebug0",
        "testdebug1",
        "plla_per",
        "pllc_per",
        "plld_per",
        "pllh_aux",
};

static const char *const bcm2835_clock_vpu_parents[] = {
        "gnd",
        "xosc",
        "testdebug0",
        "testdebug1",
        "plla_core",
        "pllc_core0",
        "plld_core",
        "pllh_aux",
        "pllc_core1",
        "pllc_core2",
};

static const char *const bcm2835_clock_osc_parents[] = {
        "gnd",
        "xosc",
        "testdebug0",
        "testdebug1"
};

/*
 * Used for a 1Mhz clock for the system clocksource, and also used by
 * the watchdog timer and the camera pulse generator.
 */
static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
        .name = "timer",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
        .parents = bcm2835_clock_osc_parents,
        .ctl_reg = CM_TIMERCTL,
        .div_reg = CM_TIMERDIV,
        .int_bits = 6,
        .frac_bits = 12,
};

/* One Time Programmable Memory clock.  Maximum 10Mhz. */
static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
        .name = "otp",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
        .parents = bcm2835_clock_osc_parents,
        .ctl_reg = CM_OTPCTL,
        .div_reg = CM_OTPDIV,
        .int_bits = 4,
        .frac_bits = 0,
};

/*
 * VPU clock.  This doesn't have an enable bit, since it drives the
 * bus for everything else, and is special so it doesn't need to be
 * gated for rate changes.  It is also known as "clk_audio" in various
 * hardware documentation.
 */
static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
        .name = "vpu",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
        .parents = bcm2835_clock_vpu_parents,
        .ctl_reg = CM_VPUCTL,
        .div_reg = CM_VPUDIV,
        .int_bits = 12,
        .frac_bits = 8,
        .is_vpu_clock = true,
};

static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
        .name = "v3d",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
        .parents = bcm2835_clock_vpu_parents,
        .ctl_reg = CM_V3DCTL,
        .div_reg = CM_V3DDIV,
        .int_bits = 4,
        .frac_bits = 8,
};

static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
        .name = "isp",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
        .parents = bcm2835_clock_vpu_parents,
        .ctl_reg = CM_ISPCTL,
        .div_reg = CM_ISPDIV,
        .int_bits = 4,
        .frac_bits = 8,
};

static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
        .name = "h264",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
        .parents = bcm2835_clock_vpu_parents,
        .ctl_reg = CM_H264CTL,
        .div_reg = CM_H264DIV,
        .int_bits = 4,
        .frac_bits = 8,
};

/* TV encoder clock.  Only operating frequency is 108Mhz.  */
static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
        .name = "vec",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
        .parents = bcm2835_clock_per_parents,
        .ctl_reg = CM_VECCTL,
        .div_reg = CM_VECDIV,
        .int_bits = 4,
        .frac_bits = 0,
};

static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
        .name = "uart",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
        .parents = bcm2835_clock_per_parents,
        .ctl_reg = CM_UARTCTL,
        .div_reg = CM_UARTDIV,
        .int_bits = 10,
        .frac_bits = 12,
};

/* HDMI state machine */
static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
        .name = "hsm",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
        .parents = bcm2835_clock_per_parents,
        .ctl_reg = CM_HSMCTL,
        .div_reg = CM_HSMDIV,
        .int_bits = 4,
        .frac_bits = 8,
};

/*
 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL in
 * the SDRAM controller can't be used.
 */
static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
        .name = "sdram",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
        .parents = bcm2835_clock_vpu_parents,
        .ctl_reg = CM_SDCCTL,
        .div_reg = CM_SDCDIV,
        .int_bits = 6,
        .frac_bits = 0,
};

/* Clock for the temperature sensor.  Generally run at 2Mhz, max 5Mhz. */
static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
        .name = "tsens",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
        .parents = bcm2835_clock_osc_parents,
        .ctl_reg = CM_TSENSCTL,
        .div_reg = CM_TSENSDIV,
        .int_bits = 5,
        .frac_bits = 0,
};

/* Arasan EMMC clock */
static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
        .name = "emmc",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
        .parents = bcm2835_clock_per_parents,
        .ctl_reg = CM_EMMCCTL,
        .div_reg = CM_EMMCDIV,
        .int_bits = 4,
        .frac_bits = 8,
};

static const struct bcm2835_clock_data bcm2835_clock_pwm_data = {
        .name = "pwm",
        .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
        .parents = bcm2835_clock_per_parents,
        .ctl_reg = CM_PWMCTL,
        .div_reg = CM_PWMDIV,
        .int_bits = 12,
        .frac_bits = 12,
};

struct bcm2835_pll {
        struct clk_hw hw;
        struct bcm2835_cprman *cprman;
        const struct bcm2835_pll_data *data;
};

static int bcm2835_pll_is_on(struct clk_hw *hw)
{
        struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
        struct bcm2835_cprman *cprman = pll->cprman;
        const struct bcm2835_pll_data *data = pll->data;

        return cprman_read(cprman, data->a2w_ctrl_reg) &
                A2W_PLL_CTRL_PRST_DISABLE;
}

static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
                                             unsigned long parent_rate,
                                             u32 *ndiv, u32 *fdiv)
{
        u64 div;

        div = (u64)rate << A2W_PLL_FRAC_BITS;
        do_div(div, parent_rate);

        *ndiv = div >> A2W_PLL_FRAC_BITS;
        *fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
}

static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
                                           u32 ndiv, u32 fdiv, u32 pdiv)
{
        u64 rate;

        if (pdiv == 0)
                return 0;

        rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
        do_div(rate, pdiv);
        return rate >> A2W_PLL_FRAC_BITS;
}

static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
                                   unsigned long *parent_rate)
{
        u32 ndiv, fdiv;

        bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);

        return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
}

static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
                                          unsigned long parent_rate)
{
        struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
        struct bcm2835_cprman *cprman = pll->cprman;
        const struct bcm2835_pll_data *data = pll->data;
        u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
        u32 ndiv, pdiv, fdiv;
        bool using_prediv;

        if (parent_rate == 0)
                return 0;

        fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
        ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
        pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
        using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
                data->ana->fb_prediv_mask;

        if (using_prediv)
                ndiv *= 2;

        return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
}

static void bcm2835_pll_off(struct clk_hw *hw)
{
        struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
        struct bcm2835_cprman *cprman = pll->cprman;
        const struct bcm2835_pll_data *data = pll->data;

        cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
        cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
}

static int bcm2835_pll_on(struct clk_hw *hw)
{
        struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
        struct bcm2835_cprman *cprman = pll->cprman;
        const struct bcm2835_pll_data *data = pll->data;
        ktime_t timeout;

        /* Take the PLL out of reset. */
        cprman_write(cprman, data->cm_ctrl_reg,
                     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);

        /* Wait for the PLL to lock. */
        timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
        while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
                if (ktime_after(ktime_get(), timeout)) {
                        dev_err(cprman->dev, "%s: couldn't lock PLL\n",
                                clk_hw_get_name(hw));
                        return -ETIMEDOUT;
                }

                cpu_relax();
        }

        return 0;
}

static void
bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
{
        int i;

        /*
         * ANA register setup is done as a series of writes to
         * ANA3-ANA0, in that order.  This lets us write all 4
         * registers as a single cycle of the serdes interface (taking
         * 100 xosc clocks), whereas if we were to update ana0, 1, and
         * 3 individually through their partial-write registers, each
         * would be their own serdes cycle.
         */
        for (i = 3; i >= 0; i--)
                cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
}

static int bcm2835_pll_set_rate(struct clk_hw *hw,
                                unsigned long rate, unsigned long parent_rate)
{
        struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
        struct bcm2835_cprman *cprman = pll->cprman;
        const struct bcm2835_pll_data *data = pll->data;
        bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
        u32 ndiv, fdiv, a2w_ctl;
        u32 ana[4];
        int i;

        if (rate < data->min_rate || rate > data->max_rate) {
                dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
                        clk_hw_get_name(hw), rate,
                        data->min_rate, data->max_rate);
                return -EINVAL;
        }

        if (rate > data->max_fb_rate) {
                use_fb_prediv = true;
                rate /= 2;
        } else {
                use_fb_prediv = false;
        }

        bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);

        for (i = 3; i >= 0; i--)
                ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);

        was_using_prediv = ana[1] & data->ana->fb_prediv_mask;

        ana[0] &= ~data->ana->mask0;
        ana[0] |= data->ana->set0;
        ana[1] &= ~data->ana->mask1;
        ana[1] |= data->ana->set1;
        ana[3] &= ~data->ana->mask3;
        ana[3] |= data->ana->set3;

        if (was_using_prediv && !use_fb_prediv) {
                ana[1] &= ~data->ana->fb_prediv_mask;
                do_ana_setup_first = true;
        } else if (!was_using_prediv && use_fb_prediv) {
                ana[1] |= data->ana->fb_prediv_mask;
                do_ana_setup_first = false;
        } else {
                do_ana_setup_first = true;
        }

        /* Unmask the reference clock from the oscillator. */
        cprman_write(cprman, A2W_XOSC_CTRL,
                     cprman_read(cprman, A2W_XOSC_CTRL) |
                     data->reference_enable_mask);

        if (do_ana_setup_first)
                bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);

        /* Set the PLL multiplier from the oscillator. */
        cprman_write(cprman, data->frac_reg, fdiv);

        a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
        a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
        a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
        a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
        a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
        cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);

        if (!do_ana_setup_first)
                bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);

        return 0;
}

static const struct clk_ops bcm2835_pll_clk_ops = {
        .is_prepared = bcm2835_pll_is_on,
        .prepare = bcm2835_pll_on,
        .unprepare = bcm2835_pll_off,
        .recalc_rate = bcm2835_pll_get_rate,
        .set_rate = bcm2835_pll_set_rate,
        .round_rate = bcm2835_pll_round_rate,
};

struct bcm2835_pll_divider {
        struct clk_divider div;
        struct bcm2835_cprman *cprman;
        const struct bcm2835_pll_divider_data *data;
};

static struct bcm2835_pll_divider *
bcm2835_pll_divider_from_hw(struct clk_hw *hw)
{
        return container_of(hw, struct bcm2835_pll_divider, div.hw);
}

static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
{
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;

        return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
}

static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
                                           unsigned long rate,
                                           unsigned long *parent_rate)
{
        return clk_divider_ops.round_rate(hw, rate, parent_rate);
}

static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
                                                  unsigned long parent_rate)
{
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;
        u32 div = cprman_read(cprman, data->a2w_reg);

        div &= (1 << A2W_PLL_DIV_BITS) - 1;
        if (div == 0)
                div = 256;

        return parent_rate / div;
}

static void bcm2835_pll_divider_off(struct clk_hw *hw)
{
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;

        cprman_write(cprman, data->cm_reg,
                     (cprman_read(cprman, data->cm_reg) &
                      ~data->load_mask) | data->hold_mask);
        cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
}

static int bcm2835_pll_divider_on(struct clk_hw *hw)
{
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;

        cprman_write(cprman, data->a2w_reg,
                     cprman_read(cprman, data->a2w_reg) &
                     ~A2W_PLL_CHANNEL_DISABLE);

        cprman_write(cprman, data->cm_reg,
                     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);

        return 0;
}

static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
                                        unsigned long rate,
                                        unsigned long parent_rate)
{
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;
        u32 cm;
        int ret;

        ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
        if (ret)
                return ret;

        cm = cprman_read(cprman, data->cm_reg);
        cprman_write(cprman, data->cm_reg, cm | data->load_mask);
        cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);

        return 0;
}

static const struct clk_ops bcm2835_pll_divider_clk_ops = {
        .is_prepared = bcm2835_pll_divider_is_on,
        .prepare = bcm2835_pll_divider_on,
        .unprepare = bcm2835_pll_divider_off,
        .recalc_rate = bcm2835_pll_divider_get_rate,
        .set_rate = bcm2835_pll_divider_set_rate,
        .round_rate = bcm2835_pll_divider_round_rate,
};

/*
 * The CM dividers do fixed-point division, so we can't use the
 * generic integer divider code like the PLL dividers do (and we can't
 * fake it by having some fixed shifts preceding it in the clock tree,
 * because we'd run out of bits in a 32-bit unsigned long).
 */
struct bcm2835_clock {
        struct clk_hw hw;
        struct bcm2835_cprman *cprman;
        const struct bcm2835_clock_data *data;
};

static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
{
        return container_of(hw, struct bcm2835_clock, hw);
}

static int bcm2835_clock_is_on(struct clk_hw *hw)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;

        return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
}

static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
                                    unsigned long rate,
                                    unsigned long parent_rate,
                                    bool round_up)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        const struct bcm2835_clock_data *data = clock->data;
        u32 unused_frac_mask =
                GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
        u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
        u64 rem;
        u32 div;

        rem = do_div(temp, rate);
        div = temp;

        /* Round up and mask off the unused bits */
        if (round_up && ((div & unused_frac_mask) != 0 || rem != 0))
                div += unused_frac_mask + 1;
        div &= ~unused_frac_mask;

        /* Clamp to the limits. */
        div = max(div, unused_frac_mask + 1);
        div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
                                      CM_DIV_FRAC_BITS - data->frac_bits));

        return div;
}

static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
                                            unsigned long parent_rate,
                                            u32 div)
{
        const struct bcm2835_clock_data *data = clock->data;
        u64 temp;

        /*
         * The divisor is a 12.12 fixed point field, but only some of
         * the bits are populated in any given clock.
         */
        div >>= CM_DIV_FRAC_BITS - data->frac_bits;
        div &= (1 << (data->int_bits + data->frac_bits)) - 1;

        if (div == 0)
                return 0;

        temp = (u64)parent_rate << data->frac_bits;

        do_div(temp, div);

        return temp;
}

static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
                                            unsigned long parent_rate)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;
        u32 div = cprman_read(cprman, data->div_reg);

        return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
}

static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
{
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;
        ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);

        while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
                if (ktime_after(ktime_get(), timeout)) {
                        dev_err(cprman->dev, "%s: couldn't lock PLL\n",
                                clk_hw_get_name(&clock->hw));
                        return;
                }
                cpu_relax();
        }
}

static void bcm2835_clock_off(struct clk_hw *hw)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;

        spin_lock(&cprman->regs_lock);
        cprman_write(cprman, data->ctl_reg,
                     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
        spin_unlock(&cprman->regs_lock);

        /* BUSY will remain high until the divider completes its cycle. */
        bcm2835_clock_wait_busy(clock);
}

static int bcm2835_clock_on(struct clk_hw *hw)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;

        spin_lock(&cprman->regs_lock);
        cprman_write(cprman, data->ctl_reg,
                     cprman_read(cprman, data->ctl_reg) |
                     CM_ENABLE |
                     CM_GATE);
        spin_unlock(&cprman->regs_lock);

        return 0;
}

static int bcm2835_clock_set_rate(struct clk_hw *hw,
                                  unsigned long rate, unsigned long parent_rate)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;
        u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);

        cprman_write(cprman, data->div_reg, div);

        return 0;
}

static int bcm2835_clock_determine_rate(struct clk_hw *hw,
                struct clk_rate_request *req)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct clk_hw *parent, *best_parent = NULL;
        unsigned long rate, best_rate = 0;
        unsigned long prate, best_prate = 0;
        size_t i;
        u32 div;

        /*
         * Select parent clock that results in the closest but lower rate
         */
        for (i = 0; i < clk_hw_get_num_parents(hw); ++i) {
                parent = clk_hw_get_parent_by_index(hw, i);
                if (!parent)
                        continue;
                prate = clk_hw_get_rate(parent);
                div = bcm2835_clock_choose_div(hw, req->rate, prate, true);
                rate = bcm2835_clock_rate_from_divisor(clock, prate, div);
                if (rate > best_rate && rate <= req->rate) {
                        best_parent = parent;
                        best_prate = prate;
                        best_rate = rate;
                }
        }

        if (!best_parent)
                return -EINVAL;

        req->best_parent_hw = best_parent;
        req->best_parent_rate = best_prate;

        req->rate = best_rate;

        return 0;
}

static int bcm2835_clock_set_parent(struct clk_hw *hw, u8 index)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;
        u8 src = (index << CM_SRC_SHIFT) & CM_SRC_MASK;

        cprman_write(cprman, data->ctl_reg, src);
        return 0;
}

static u8 bcm2835_clock_get_parent(struct clk_hw *hw)
{
        struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
        struct bcm2835_cprman *cprman = clock->cprman;
        const struct bcm2835_clock_data *data = clock->data;
        u32 src = cprman_read(cprman, data->ctl_reg);

        return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
}


static const struct clk_ops bcm2835_clock_clk_ops = {
        .is_prepared = bcm2835_clock_is_on,
        .prepare = bcm2835_clock_on,
        .unprepare = bcm2835_clock_off,
        .recalc_rate = bcm2835_clock_get_rate,
        .set_rate = bcm2835_clock_set_rate,
        .determine_rate = bcm2835_clock_determine_rate,
        .set_parent = bcm2835_clock_set_parent,
        .get_parent = bcm2835_clock_get_parent,
};

static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
{
        return true;
}

/*
 * The VPU clock can never be disabled (it doesn't have an ENABLE
 * bit), so it gets its own set of clock ops.
 */
static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
        .is_prepared = bcm2835_vpu_clock_is_on,
        .recalc_rate = bcm2835_clock_get_rate,
        .set_rate = bcm2835_clock_set_rate,
        .determine_rate = bcm2835_clock_determine_rate,
        .set_parent = bcm2835_clock_set_parent,
        .get_parent = bcm2835_clock_get_parent,
};

static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
                                        const struct bcm2835_pll_data *data)
{
        struct bcm2835_pll *pll;
        struct clk_init_data init;

        memset(&init, 0, sizeof(init));

        /* All of the PLLs derive from the external oscillator. */
        init.parent_names = &cprman->osc_name;
        init.num_parents = 1;
        init.name = data->name;
        init.ops = &bcm2835_pll_clk_ops;
        init.flags = CLK_IGNORE_UNUSED;

        pll = kzalloc(sizeof(*pll), GFP_KERNEL);
        if (!pll)
                return NULL;

        pll->cprman = cprman;
        pll->data = data;
        pll->hw.init = &init;

        return devm_clk_register(cprman->dev, &pll->hw);
}

static struct clk *
bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
                             const struct bcm2835_pll_divider_data *data)
{
        struct bcm2835_pll_divider *divider;
        struct clk_init_data init;
        struct clk *clk;
        const char *divider_name;

        if (data->fixed_divider != 1) {
                divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
                                              "%s_prediv", data->name);
                if (!divider_name)
                        return NULL;
        } else {
                divider_name = data->name;
        }

        memset(&init, 0, sizeof(init));

        init.parent_names = &data->source_pll->name;
        init.num_parents = 1;
        init.name = divider_name;
        init.ops = &bcm2835_pll_divider_clk_ops;
        init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;

        divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
        if (!divider)
                return NULL;

        divider->div.reg = cprman->regs + data->a2w_reg;
        divider->div.shift = A2W_PLL_DIV_SHIFT;
        divider->div.width = A2W_PLL_DIV_BITS;
        divider->div.flags = 0;
        divider->div.lock = &cprman->regs_lock;
        divider->div.hw.init = &init;
        divider->div.table = NULL;

        divider->cprman = cprman;
        divider->data = data;

        clk = devm_clk_register(cprman->dev, &divider->div.hw);
        if (IS_ERR(clk))
                return clk;

        /*
         * PLLH's channels have a fixed divide by 10 afterwards, which
         * is what our consumers are actually using.
         */
        if (data->fixed_divider != 1) {
                return clk_register_fixed_factor(cprman->dev, data->name,
                                                 divider_name,
                                                 CLK_SET_RATE_PARENT,
                                                 1,
                                                 data->fixed_divider);
        }

        return clk;
}

static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
                                          const struct bcm2835_clock_data *data)
{
        struct bcm2835_clock *clock;
        struct clk_init_data init;
        const char *parents[1 << CM_SRC_BITS];
        size_t i;

        /*
         * Replace our "xosc" references with the oscillator's
         * actual name.
         */
        for (i = 0; i < data->num_mux_parents; i++) {
                if (strcmp(data->parents[i], "xosc") == 0)
                        parents[i] = cprman->osc_name;
                else
                        parents[i] = data->parents[i];
        }

        memset(&init, 0, sizeof(init));
        init.parent_names = parents;
        init.num_parents = data->num_mux_parents;
        init.name = data->name;
        init.flags = CLK_IGNORE_UNUSED;

        if (data->is_vpu_clock) {
                init.ops = &bcm2835_vpu_clock_clk_ops;
        } else {
                init.ops = &bcm2835_clock_clk_ops;
                init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
        }

        clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
        if (!clock)
                return NULL;

        clock->cprman = cprman;
        clock->data = data;
        clock->hw.init = &init;

        return devm_clk_register(cprman->dev, &clock->hw);
}

static int bcm2835_clk_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct clk **clks;
        struct bcm2835_cprman *cprman;
        struct resource *res;

        cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
        if (!cprman)
                return -ENOMEM;

        spin_lock_init(&cprman->regs_lock);
        cprman->dev = dev;
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        cprman->regs = devm_ioremap_resource(dev, res);
        if (IS_ERR(cprman->regs))
                return PTR_ERR(cprman->regs);

        cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0);
        if (!cprman->osc_name)
                return -ENODEV;

        platform_set_drvdata(pdev, cprman);

        cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
        cprman->onecell.clks = cprman->clks;
        clks = cprman->clks;

        clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
        clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
        clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
        clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
        clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);

        clks[BCM2835_PLLA_CORE] =
                bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
        clks[BCM2835_PLLA_PER] =
                bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
        clks[BCM2835_PLLC_CORE0] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
        clks[BCM2835_PLLC_CORE1] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
        clks[BCM2835_PLLC_CORE2] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
        clks[BCM2835_PLLC_PER] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
        clks[BCM2835_PLLD_CORE] =
                bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
        clks[BCM2835_PLLD_PER] =
                bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
        clks[BCM2835_PLLH_RCAL] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
        clks[BCM2835_PLLH_AUX] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
        clks[BCM2835_PLLH_PIX] =
                bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);

        clks[BCM2835_CLOCK_TIMER] =
                bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
        clks[BCM2835_CLOCK_OTP] =
                bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
        clks[BCM2835_CLOCK_TSENS] =
                bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
        clks[BCM2835_CLOCK_VPU] =
                bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
        clks[BCM2835_CLOCK_V3D] =
                bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
        clks[BCM2835_CLOCK_ISP] =
                bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
        clks[BCM2835_CLOCK_H264] =
                bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
        clks[BCM2835_CLOCK_V3D] =
                bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
        clks[BCM2835_CLOCK_SDRAM] =
                bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
        clks[BCM2835_CLOCK_UART] =
                bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
        clks[BCM2835_CLOCK_VEC] =
                bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
        clks[BCM2835_CLOCK_HSM] =
                bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
        clks[BCM2835_CLOCK_EMMC] =
                bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);

        /*
         * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
         * you have the debug bit set in the power manager, which we
         * don't bother exposing) are individual gates off of the
         * non-stop vpu clock.
         */
        clks[BCM2835_CLOCK_PERI_IMAGE] =
                clk_register_gate(dev, "peri_image", "vpu",
                                  CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
                                  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
                                  0, &cprman->regs_lock);

        clks[BCM2835_CLOCK_PWM] =
                bcm2835_register_clock(cprman, &bcm2835_clock_pwm_data);

        return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
                                   &cprman->onecell);
}

static const struct of_device_id bcm2835_clk_of_match[] = {
        { .compatible = "brcm,bcm2835-cprman", },
        {}
};
MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);

static struct platform_driver bcm2835_clk_driver = {
        .driver = {
                .name = "bcm2835-clk",
                .of_match_table = bcm2835_clk_of_match,
        },
        .probe          = bcm2835_clk_probe,
};

builtin_platform_driver(bcm2835_clk_driver);

MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
MODULE_DESCRIPTION("BCM2835 clock driver");
MODULE_LICENSE("GPL v2");